Arch Linux

bier

Member

Registered: 2006-01-22

Posts: 8

cant run my dvbt. (SOLVED)

The Twinhand DVBT CARD under Gentoo works Perfectly but under arch *lol* no way.
No Help here in Forum no Help in Irc no Help on Wiki (more then disappointing)

I follow the tutorial form gentoo http://forums.gentoo.org/viewtopic.php? … visionplus

Arch detects my DVB-T Card

bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bttv: Bt8xx card found (0).
ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [LNK4] -> GSI 7 (level, low) -> IRQ 7
bttv0: Bt878 (rev 17) at 0000:01:07.0, irq: 7, latency: 32, mmio: 0xd2000000
bttv0: detected: Twinhan VisionPlus DVB [card=113], PCI subsystem ID is 1822:0001
bttv0: using: Twinhan DST + clones [card=113,autodetected]
bttv0: gpio: en=00000000, out=00000000 in=00f100ff [init]
bttv0: using tuner=4
bttv0: add subdevice "dvb0"

Cub69

Member

From: Ottawa, Canada

Registered: 2006-01-20

Posts: 87

Website

Re: cant run my dvbt. (SOLVED)

Ok so what is the problem?  What doesn't work?  I don't have a huge amount of experience specific to Arch but I do with Linux and Arch is pretty good at maintaining a standard layout. 

After reboot, try unloading the module and reloading it -- that will tell you a couple of things like whether it is module related or something more.

Cub

Moo-Crumpus

Member

From: Hessen / Germany

Registered: 2003-12-01

Posts: 1,488

Re: cant run my dvbt. (SOLVED)

I have no idea of dvbt configs anyway, inspite I run it with kaffeine.

Kaffeeine macht das - versuche es mal. Ich kann auch  keine Handkonfiguration von dvbt. Gentoo ist sehr viel besser dokumentiert, im Vergleich zu Gentoo ist das hier aber auch eine Kleinveranstaltung .

---

Frumpus ♥ addict
[mu'.krum.pus], [frum.pus]

bier

Member

Registered: 2006-01-22

Posts: 8

Re: cant run my dvbt. (SOLVED)

I have no idea of dvbt configs anyway, inspite I run it with kaffeine.

Kaffeeine macht das - versuche es mal. Ich kann auch  keine Handkonfiguration von dvbt. Gentoo ist sehr viel besser dokumentiert, im Vergleich zu Gentoo ist das hier aber auch eine Kleinveranstaltung .

Leider macht Kaffeine gar nichts es meint nur "cant bind socket" klar wenn nicht mal ein /dev/dvb da ist, weder /dev/video.

Kleinveranstalltung aber es gefehlt mir besser als gentoo.

Ich frag mich nur wo die ganzen Linux Pros sind, es muss doch nur ein erklärt werden ich wuerde sogar ein how-to schreiben.

AndyRTR

Developer

From: Magdeburg/Germany

Registered: 2005-10-07

Posts: 1,641

Re: cant run my dvbt. (SOLVED)

Just find out what modules are loaded in Gentoo and then try to tweak your rc.conf modules area ;-)

Cub69

Member

From: Ottawa, Canada

Registered: 2006-01-20

Posts: 87

Website

Re: cant run my dvbt. (SOLVED)

If it can't bind the socket to /dev/dvb devices then you need to make the devices.  The Gentoo howto has a section (I believe) on how to make the devices and patch udev to make them on reboot. 

To check if that is your problem, then do an ls on /dev/dvb* to see if they exist.

Cub

AndyRTR

Developer

From: Magdeburg/Germany

Registered: 2005-10-07

Posts: 1,641

Re: cant run my dvbt. (SOLVED)

No need to do that. Here udev creates the /dev/dvb (satellite) fine.

bier

Member

Registered: 2006-01-22

Posts: 8

Re: cant run my dvbt. (SOLVED)

Just find out what modules are loaded in Gentoo and then try to tweak your rc.conf modules area ;-)

why rc.conf?
Its modprobe.conf not the right place?

can you past the part from your rc.conf, i just wanna compare.
Thank you.

AndyRTR

Developer

From: Magdeburg/Germany

Registered: 2005-10-07

Posts: 1,641

Re: cant run my dvbt. (SOLVED)

My dvb card is automaticly detected by hwdetect and modules are loaded quiet correctly. Also udev creates the /dev/dvb properly.

[root@workstation64 nvidia]# hwdetect --show-modules
IDE    : ide-cd ide-core ide-disk alim15x3 generic
USB    : usb-storage usblp usbhid usbcore ehci-hcd ohci-hcd yealink stv680
FW     : eth1394 ieee1394 ohci1394 sbp2
NET    : uli526x
SOUND  : snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-hwdep snd-page-alloc snd-rawmidi snd-timer snd snd-ac97-bus snd-ac97-codec snd-emu10k1 soundcore snd-util-mem
VIDEO  : videodev nvidia
OTHER  : cdrom i2c-ali1535 i2c-ali1563 i2c-ali15x3 i2c-core evdev emu10k1-gp gameport pcspkr serio_raw b2c2-flexcop-pci b2c2-flexcop dvb-core bcm3510 dvb-pll lgdt330x mt312 mt352 nxt2002 stv0297 stv0299 pci_hotplug shpchp
[root@workstation64 nvidia]#

Just find out the proper modules for your card and then we can tweak your /etc/rc.conf! You can blacklist any module that shouldn't be loaded automaticly and you can manually load modules there if hwdetect won't do it.

Entries in /etc/modprobe.preload maybe overwritten by hwdetect but I'm not sure. User tpowa will know it exactly. He has written hwdetect ;-)

Kern

Member

From: UK

Registered: 2005-02-09

Posts: 464

Re: cant run my dvbt. (SOLVED)

Deja Vu or what ?

i read the OP's initial post and i just got that creepy feeling i'd read similar elsewhere in the forums. after a great search i found it.

Moo - it was your recent "20 ways" submission :twisted:

bier

Member

Registered: 2006-01-22

Posts: 8

Re: cant run my dvbt. (SOLVED)

My dvb card is automaticly detected by hwdetect and modules are loaded quiet correctly. Also udev creates the /dev/dvb properly.

[root@workstation64 nvidia]# hwdetect --show-modules
IDE    : ide-cd ide-core ide-disk alim15x3 generic
USB    : usb-storage usblp usbhid usbcore ehci-hcd ohci-hcd yealink stv680
FW     : eth1394 ieee1394 ohci1394 sbp2
NET    : uli526x
SOUND  : snd-mixer-oss snd-pcm-oss snd-seq-oss snd-seq-device snd-seq-midi-event snd-hwdep snd-page-alloc snd-rawmidi snd-timer snd snd-ac97-bus snd-ac97-codec snd-emu10k1 soundcore snd-util-mem
VIDEO  : videodev nvidia
OTHER  : cdrom i2c-ali1535 i2c-ali1563 i2c-ali15x3 i2c-core evdev emu10k1-gp gameport pcspkr serio_raw b2c2-flexcop-pci b2c2-flexcop dvb-core bcm3510 dvb-pll lgdt330x mt312 mt352 nxt2002 stv0297 stv0299 pci_hotplug shpchp
[root@workstation64 nvidia]#

Just find out the proper modules for your card and then we can tweak your /etc/rc.conf! You can blacklist any module that shouldn't be loaded automaticly and you can manually load modules there if hwdetect won't do it.

Entries in /etc/modprobe.preload maybe overwritten by hwdetect but I'm not sure. User tpowa will know it exactly. He has written hwdetect ;-)

this hwdetect

 [root@thor wine_tools]# hwdetect --show-modules
AGP    : agpgart nvidia-agp
IDE    : ide-cd ide-core ide-disk amd74xx generic
SCSI   : sd_mod
SATA   : libata sata_nv sata_sil
USB    : usb-storage usblp usbhid usbcore ehci-hcd ohci-hcd
NET    : 8139cp 8139too mii
VIDEO  : btcx-risc bttv tveeprom video-buf nvidia
OTHER  : cdrom rtc i2c-algo-bit i2c-nforce2 i2c-core evdev emu10k1-gp gameport serio_raw bt878 pci_hotplug shpchp
[root@thor wine_tools]#            
    

Hmm i doesent have dvb-core in my hwdetect

bier

Member

Registered: 2006-01-22

Posts: 8

Re: cant run my dvbt. (SOLVED)

My thanks goes to zzam a really dvb pro

the problem was solved..

The comming days i will write a tutorial if needed