You are not logged in.

#1 2014-06-25 20:39:30

damienyong
Member
Registered: 2014-06-25
Posts: 4

Ericsson N5321 not showing

Hello,
at first I want to say that I'm new to ARCH, so please dont kill me for my Questions.

I'm using ARCH on my T440p Thinkpad, and I'm confused, because my Ericsson N5321 WWAN module doesn't show up, even when I have installed modemmanager and networkmanager.
It isn't shown in ifconfig, only my ethernet,loop,wifi is shown.
So It looks like the driver isn't loaded correctly.
I'm using the 3.15.1-1-ARCH Kernel.

In lsusb I can see this device:

Bus 003 Device 004: ID 0bdb:193e Ericsson Business Mobile Networks BV

Pls can you help me enabling this ?

Offline

#2 2014-06-25 20:47:28

ids1024
Member
From: California
Registered: 2013-08-16
Posts: 243
Website

Re: Ericsson N5321 not showing

First Google result for  "ericsson n5321 linux":
https://forums.lenovo.com/t5/Linux-Disc … -p/1430665


"Only wimps use tape backup: _real_ men just upload their important stuff on ftp, and let the rest of the world mirror it."—Linus Torvalds
s/ftp/git/

https://iandouglasscott.com | https://github.org/ids1024 | https://keybase.io/ids1024

Offline

#3 2014-06-25 21:04:46

damienyong
Member
Registered: 2014-06-25
Posts: 4

Re: Ericsson N5321 not showing

Yes, it's the first result and a problem which isn't that which I've descirbed.
I can't even see this medem in Networkmanager, or even in ifconfig. I don't have problems with disconnections (till this point)

Offline

#4 2014-06-25 21:34:13

ids1024
Member
From: California
Registered: 2013-08-16
Posts: 243
Website

Re: Ericsson N5321 not showing

You could try the solution, even if the problem is not the same.  What is the output of "ip link"?


"Only wimps use tape backup: _real_ men just upload their important stuff on ftp, and let the rest of the world mirror it."—Linus Torvalds
s/ftp/git/

https://iandouglasscott.com | https://github.org/ids1024 | https://keybase.io/ids1024

Offline

#5 2014-06-25 22:11:49

ids1024
Member
From: California
Registered: 2013-08-16
Posts: 243
Website

Re: Ericsson N5321 not showing

You could also try "sudo modprobe cdc_ncm" to start the kernel module manually.


"Only wimps use tape backup: _real_ men just upload their important stuff on ftp, and let the rest of the world mirror it."—Linus Torvalds
s/ftp/git/

https://iandouglasscott.com | https://github.org/ids1024 | https://keybase.io/ids1024

Offline

#6 2014-06-25 22:32:09

damienyong
Member
Registered: 2014-06-25
Posts: 4

Re: Ericsson N5321 not showing

Thanks, I didn't know the ip link command (I ever used ifconfig).

Now the device appears in my ifconfig list ({after typing ifconfig wwp0* up}

       wwp0s20u10i6: flags=4099<UP,BROADCAST,MULTICAST>  mtu 1500
        ether 02:15:e0:ec:01:00  txqueuelen 1000  (Ethernet)
        RX packets 0  bytes 0 (0.0 B)
        RX errors 0  dropped 0  overruns 0  frame 0
        TX packets 0  bytes 0 (0.0 B)
        TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
)

But its again not showing in networkmanager

Offline

#7 2014-06-25 22:41:02

ids1024
Member
From: California
Registered: 2013-08-16
Posts: 243
Website

Re: Ericsson N5321 not showing


"Only wimps use tape backup: _real_ men just upload their important stuff on ftp, and let the rest of the world mirror it."—Linus Torvalds
s/ftp/git/

https://iandouglasscott.com | https://github.org/ids1024 | https://keybase.io/ids1024

Offline

#8 2014-06-25 22:53:30

damienyong
Member
Registered: 2014-06-25
Posts: 4

Re: Ericsson N5321 not showing

Thank you for your assistance smile
I fond the error on myself, ... ModemManager was installed, but not enabled through systemctl ...

Offline

Board footer

Powered by FluxBB