You are not logged in.

#1 2014-08-18 10:20:05

plarke
Member
Registered: 2014-07-17
Posts: 15

[SOLVED] Netctl fails to start profile on new network

Wireless has been working fine for a few months, then I  got a new router(another 2wire), and the methods I used before fail to connect.

What I do is generate a profile with wifi-menu, and then enable it with netctl. This time wifi-menu failed to connect and so does netctl every time I try to start profile. Here I've searched all over the web for someone else with this problem. This is the output from journalctl -xn:

Aug 18 04:48:05 pc kernel: iwlwifi 000:01:00.0:  Error clearing ASSOC_MSK on BSS (-5)
Aug 18 04:48:05 pc kernel: iwlwifi 000:01:00.0:   FH_RSCR_CHNL0_WPTR: 0X00000000
Aug 18 04:48:05 pc kernel: iwlwifi 000:01:00.0:   FH_MEM_RCSR_CHNL0_CONFIG_REG: 0X00801114
Aug 18 04:48:05 pc kernel: iwlwifi 000:01:00.0:  FH_MEM_RSSR_SHARED_CTRL_REG: 0X000000fc
Aug 18 04:48:05 pc kernel: iwlwifi 000:01:00.0:   FH_MEM_RSSR_RX_STATUS_REG: 0X07030000 
Aug 18 04:48:05 pc kernel: iwlwifi 000:01:00.0:  FH_MEM_RSSR_RX_ENABLE_ERR_IRQ2DVR:0X00000000       
Aug 18 04:48:05 pc kernel: iwlwifi 000:01:00.0:  FH_TSSR_TX_STATUS_REG: 0X07ff0001
Aug 18 04:48:05 pc kernel: iwlwifi 000:01:00.0: FH_TSSR_TX_ERROR_REG: 0X00000000
Aug 18 04:48:05 pc kernel: ieee80211 phy0: Hardware restart was requested

(Formatted differently)

Last edited by plarke (2014-08-21 02:28:57)

Offline

#2 2014-08-19 19:38:51

plarke
Member
Registered: 2014-07-17
Posts: 15

Re: [SOLVED] Netctl fails to start profile on new network

My password was wrong, and there was a random dhcp server that I had to blacklist. I'm all good now.

Last edited by plarke (2014-08-21 02:30:01)

Offline

Board footer

Powered by FluxBB