You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2014-02-15 16:36:36
- mark_1
- Member
- Registered: 2014-02-15
- Posts: 10
Toshiba Chromebook
Hi all!
i've just bought the toshiba chromebook and i've just installed arch on it (it's easy since it has an x86 cpu and seabios). I red
https://wiki.archlinux.org/index.php/Ac … Chromebook to help me.
by the way, i've 3 important problems (or 2?):
1- i'm still not able to get my touchpad work (neither using the kernel patches described in the link above[assuming they are the correct ones for me])
2- i get tons of "resume error" if i try to poweroff the notebook after a recover from suspend mode.
(basically, i put the chromebook in suspend mode for a while, next i recover it and i can do my work, finally, if i try to poweroff, it gives me that error)
3- (i don't know if it's a problem) during the boot i get this error
usb 2-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409Hoping for aid!! XD
PS: i'm italian, sorry for grammatical or sintax mistakes!
Last edited by mark_1 (2014-02-15 16:38:17)
Offline
#2 2014-02-15 19:58:38
- Rexilion
- Member
- Registered: 2013-12-23
- Posts: 784
Re: Toshiba Chromebook
Please post your dmesg?
fs/super.c : "Self-destruct in 5 seconds. Have a nice day...\n",
Offline
#3 2014-02-15 20:31:56
- mark_1
- Member
- Registered: 2014-02-15
- Posts: 10
Re: Toshiba Chromebook
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.9-1-ARCH (tobias@testing-i686) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jan 26 09:15:23 CET 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000002ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009e3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000001000000-0x000000007bf79fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bf7a000-0x000000007e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Toshiba Leon, BIOS 12/04/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7bf7a max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 007C800000 mask 7FFF800000 uncachable
[ 0.000000] 2 base 007D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 007E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 write-combining
[ 0.000000] 5 base 00FF800000 mask 7FFF800000 uncachable
[ 0.000000] 6 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x00efffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x00bfffff] page 2M
[ 0.000000] [mem 0x00c00000-0x00efffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x01000000-0x2fffffff]
[ 0.000000] [mem 0x01000000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x0177c000, 0x0177cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37900000-0x37c77fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37486000-0x377fdb8f]
[ 0.000000] Move RAMDISK from [mem 0x37900000-0x37c77b8f] to [mem 0x37486000-0x377fdb8f]
[ 0.000000] ACPI: RSDP 000fdbb0 00024 (v02 CORE )
[ 0.000000] ACPI: XSDT 7bf840e0 00054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 7bf88690 000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130725/tbfadt-202)
[ 0.000000] ACPI: DSDT 7bf84250 04431 (v02 COREv4 COREBOOT 20110725 INTL 20090123)
[ 0.000000] ACPI: FACS 7bf84210 00040
[ 0.000000] ACPI: HPET 7bf88790 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 7bf887d0 0005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 7bf88830 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 7bf89730 008A0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: SSDT 7bf89fd0 0005C (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1095MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0177d000, 0x0177dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7bf79fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0002ffff]
[ 0.000000] node 0: [mem 0x00040000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x00efffff]
[ 0.000000] node 0: [mem 0x01000000-0x7bf79fff]
[ 0.000000] On node 0 totalpages: 507399
[ 0.000000] free_area_init_node: node 0, pgdat c15d6640, node_mem_map f6506020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3725 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2191 pages used for memmap
[ 0.000000] HighMem zone: 280444 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x00030000-0x0003ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00f00000-0x00ffffff]
[ 0.000000] e820: [mem 0x7ea00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f64de000 s33408 r0 d23936 u57344
[ 0.000000] pcpu-alloc: s33408 r0 d23936 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505623
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b726a4e0-dd32-4284-aa06-1634c120f63a rw quiet add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic,lapic
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 4062152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bf7a)
[ 0.000000] Memory: 1997500K/2029596K available (4328K kernel code, 431K rwdata, 1280K rodata, 612K init, 952K bss, 32096K reserved, 1121776K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc15e8000 - 0xc1681000 ( 612 kB)
.data : 0xc143a39e - 0xc15e7c40 (1718 kB)
.text : 0xc1000000 - 0xc143a39e (4328 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1396.740 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.87 BogoMIPS (lpj=4655800)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000046] Security Framework initialized
[ 0.000054] AppArmor: AppArmor disabled by boot time parameter
[ 0.000056] Yama: becoming mindful.
[ 0.000071] Mount-cache hash table entries: 512
[ 0.000331] Initializing cgroup subsys memory
[ 0.000340] Initializing cgroup subsys devices
[ 0.000342] Initializing cgroup subsys freezer
[ 0.000344] Initializing cgroup subsys net_cls
[ 0.000347] Initializing cgroup subsys blkio
[ 0.000381] CPU: Physical Processor ID: 0
[ 0.000383] CPU: Processor Core ID: 0
[ 0.003068] mce: CPU supports 7 MCE banks
[ 0.003086] CPU0: Thermal monitoring enabled (TM1)
[ 0.003104] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[ 0.003298] Freeing SMP alternatives memory: 20K (c1681000 - c1686000)
[ 0.004393] ACPI: Core revision 20130725
[ 0.007468] ACPI: All ACPI Tables successfully acquired
[ 0.009201] ftrace: allocating 19323 entries in 38 pages
[ 0.020772] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.021386] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054387] smpboot: CPU0: Intel(R) Celeron(R) 2955U @ 1.40GHz (fam: 06, model: 45, stepping: 01)
[ 0.054395] TSC deadline timer enabled
[ 0.054404] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.054414] ... version: 3
[ 0.054415] ... bit width: 48
[ 0.054417] ... generic registers: 8
[ 0.054419] ... value mask: 0000ffffffffffff
[ 0.054420] ... max period: 0000ffffffffffff
[ 0.054422] ... fixed-purpose events: 3
[ 0.054424] ... event mask: 00000007000000ff
[ 0.081222] CPU 1 irqstacks, hard=f5cce000 soft=f5cd8000
[ 0.081225] smpboot: Booting Node 0, Processors # 1 OK
[ 0.091519] Initializing CPU#1
[ 0.097118] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.097135] Brought up 2 CPUs
[ 0.097137] smpboot: Total of 2 processors activated (5589.75 BogoMIPS)
[ 0.099236] devtmpfs: initialized
[ 0.100741] RTC time: 20:28:21, date: 02/15/14
[ 0.100802] NET: Registered protocol family 16
[ 0.101010] cpuidle: using governor ladder
[ 0.101013] cpuidle: using governor menu
[ 0.101137] ACPI: bus type PCI registered
[ 0.101140] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.101206] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.101209] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.101211] PCI: Using MMCONFIG for extended config space
[ 0.101213] PCI: Using configuration type 1 for base access
[ 0.102102] bio: create slab <bio-0> at 0
[ 0.102246] ACPI: Added _OSI(Module Device)
[ 0.102249] ACPI: Added _OSI(Processor Device)
[ 0.102251] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.102253] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.103393] ACPI: EC: Look up EC in DSDT
[ 0.112480] ACPI: Interpreter enabled
[ 0.112492] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.112499] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.112516] ACPI: (supports S0 S3 S4 S5)
[ 0.112518] ACPI: Using IOAPIC for interrupt routing
[ 0.112544] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.112690] ACPI: No dock devices found.
[ 0.123988] ACPI: Power Resource [TNP0] (off)
[ 0.124027] ACPI: Power Resource [TNP1] (on)
[ 0.124529] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.124567] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.124595] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.124712] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
[ 0.124717] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.124953] PCI host bridge to bus 0000:00
[ 0.124957] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.124960] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.124963] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.124965] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.124968] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.124970] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.124973] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.124975] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.124977] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.124980] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.124982] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.124985] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.124987] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.124989] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.124992] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.124994] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.124997] pci_bus 0000:00: root bus resource [mem 0x7ea00001-0xfebfffff]
[ 0.124999] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.125011] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.125139] pci 0000:00:02.0: [8086:0a06] type 00 class 0x030000
[ 0.125157] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.125167] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.125175] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
[ 0.125294] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.125306] pci 0000:00:03.0: reg 0x10: [mem 0xe0510000-0xe0513fff 64bit]
[ 0.125452] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.125474] pci 0000:00:14.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit]
[ 0.125544] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.125604] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.125652] pci 0000:00:15.0: [8086:9c60] type 00 class 0x080102
[ 0.125673] pci 0000:00:15.0: reg 0x10: [mem 0xe0518000-0xe0518fff]
[ 0.125685] pci 0000:00:15.0: reg 0x14: [mem 0xe0519000-0xe0519fff]
[ 0.125846] pci 0000:00:15.1: [8086:9c61] type 00 class 0x0c8000
[ 0.125867] pci 0000:00:15.1: reg 0x10: [mem 0xe051a000-0xe051afff]
[ 0.125879] pci 0000:00:15.1: reg 0x14: [mem 0xe051b000-0xe051bfff]
[ 0.126040] pci 0000:00:15.2: [8086:9c62] type 00 class 0x0c8000
[ 0.126061] pci 0000:00:15.2: reg 0x10: [mem 0xe051c000-0xe051cfff]
[ 0.126073] pci 0000:00:15.2: reg 0x14: [mem 0xe051d000-0xe051dfff]
[ 0.126244] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.126261] pci 0000:00:1b.0: reg 0x10: [mem 0xe0514000-0xe0517fff 64bit]
[ 0.126336] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.126396] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.126440] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.126515] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.126630] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.126654] pci 0000:00:1d.0: reg 0x10: [mem 0xe051f800-0xe051fbff]
[ 0.126758] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.126820] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.126868] pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100
[ 0.127082] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.127100] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.127116] pci 0000:00:1f.2: reg 0x14: [io 0x1870-0x1873]
[ 0.127125] pci 0000:00:1f.2: reg 0x18: [io 0x1868-0x186f]
[ 0.127134] pci 0000:00:1f.2: reg 0x1c: [io 0x1874-0x1877]
[ 0.127143] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.127153] pci 0000:00:1f.2: reg 0x24: [mem 0xe051f000-0xe051f7ff]
[ 0.127196] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.127290] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.127307] pci 0000:00:1f.3: reg 0x10: [mem 0xe051fc00-0xe051fcff 64bit]
[ 0.127332] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.127445] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
[ 0.127480] pci 0000:00:1f.6: reg 0x10: [mem 0xe051e000-0xe051efff 64bit]
[ 0.127750] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
[ 0.127777] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
[ 0.127837] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
[ 0.127897] pci 0000:01:00.0: supports D1
[ 0.127900] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.133828] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.133835] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.133851] pci_bus 0000:00: on NUMA node 0
[ 0.134049] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.134113] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.134172] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.134230] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[ 0.134287] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.134344] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.134400] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.134457] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.134910] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.134961] Found 1 acpi root devices
[ 0.135006] ACPI: EC: GPE = 0x24, I/O: command/status = 0x66, data = 0x62
[ 0.135097] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.135101] vgaarb: loaded
[ 0.135103] vgaarb: bridge control possible 0000:00:02.0
[ 0.135144] PCI: Using ACPI for IRQ routing
[ 0.136799] PCI: pci_cache_line_size set to 64 bytes
[ 0.136853] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[ 0.136855] e820: reserve RAM buffer [mem 0x7bf7a000-0x7bffffff]
[ 0.136965] NetLabel: Initializing
[ 0.136967] NetLabel: domain hash size = 128
[ 0.136968] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.136982] NetLabel: unlabeled traffic allowed by default
[ 0.137095] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.137104] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.139130] Switched to clocksource hpet
[ 0.145610] pnp: PnP ACPI init
[ 0.145626] ACPI: bus type PNP registered
[ 0.145692] pnp 00:00: Plug and Play ACPI device, IDs PNP0c0e (active)
[ 0.145734] pnp 00:01: Plug and Play ACPI device, IDs PNP0c0e (active)
[ 0.145806] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.145809] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.145812] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.145815] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.145818] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.145821] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.145824] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.145827] system 00:02: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.145830] system 00:02: [mem 0x00f00000-0x00ffffff] has been reserved
[ 0.145834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146023] pnp 00:03: [dma 4]
[ 0.146051] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.146089] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.146192] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.146196] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.146237] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.146307] system 00:07: [io 0x1000-0x10fe] could not be reserved
[ 0.146311] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146343] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.146392] system 00:09: [io 0x0900-0x09fe] has been reserved
[ 0.146396] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146443] system 00:0a: [io 0x0200] has been reserved
[ 0.146446] system 00:0a: [io 0x0204] has been reserved
[ 0.146449] system 00:0a: [io 0x0800-0x087f] has been reserved
[ 0.146451] system 00:0a: [io 0x0880-0x08ff] has been reserved
[ 0.146455] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146500] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.146545] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.146594] pnp 00:0d: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.146703] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146887] pnp 00:0f: Plug and Play ACPI device, IDs INT33c7 (active)
[ 0.146906] pnp: PnP ACPI: found 16 devices
[ 0.146907] ACPI: bus type PNP unregistered
[ 0.183713] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.183721] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.183732] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.183734] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.183737] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.183739] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.183742] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.183744] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.183747] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.183749] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.183752] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.183754] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.183757] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.183759] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.183762] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.183764] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.183766] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.183769] pci_bus 0000:00: resource 19 [mem 0x7ea00001-0xfebfffff]
[ 0.183771] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[ 0.183774] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.183819] NET: Registered protocol family 2
[ 0.184009] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.184028] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.184046] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.184062] TCP: reno registered
[ 0.184066] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.184071] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.184132] NET: Registered protocol family 1
[ 0.184147] pci 0000:00:02.0: Boot video device
[ 0.184632] PCI: CLS 64 bytes, default 64
[ 0.184677] Unpacking initramfs...
[ 0.293062] Freeing initrd memory: 3552K (f7486000 - f77fe000)
[ 0.293287] apm: BIOS not found.
[ 0.293320] Scanning for low memory corruption every 60 seconds
[ 0.293629] audit: initializing netlink socket (disabled)
[ 0.293641] type=2000 audit(1392496101.293:1): initialized
[ 0.311615] bounce pool size: 64 pages
[ 0.311627] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.313306] zbud: loaded
[ 0.313428] VFS: Disk quotas dquot_6.5.2
[ 0.313489] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.313703] msgmni has been set to 1717
[ 0.313999] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.314036] io scheduler noop registered
[ 0.314037] io scheduler deadline registered
[ 0.314073] io scheduler cfq registered (default)
[ 0.314304] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[ 0.314422] aer 0000:00:1c.0:pcie02: service driver aer loaded
[ 0.314441] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.314443] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.314447] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.314463] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.314483] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.314539] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.314541] vesafb: scrolling: redraw
[ 0.314543] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.314786] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 4160k, total 4160k
[ 0.320170] Console: switching to colour frame buffer device 170x48
[ 0.325408] fb0: VESA VGA frame buffer device
[ 0.325424] intel_idle: MWAIT substates: 0x11142120
[ 0.325426] intel_idle: v0.4 model 0x45
[ 0.325428] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.325566] GHES: HEST is not enabled!
[ 0.325579] isapnp: Scanning for PnP cards...
[ 0.637125] isapnp: No Plug & Play device found
[ 0.637201] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.638140] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.638142] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.638795] i8042: Warning: Keylock active
[ 0.638929] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.639106] mousedev: PS/2 mouse device common for all mice
[ 0.639168] rtc_cmos 00:08: RTC can wake from S4
[ 0.639350] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.639379] rtc_cmos 00:08: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.639408] Intel P-state driver initializing.
[ 0.639423] Intel pstate controlling: cpu 0
[ 0.639440] Intel pstate controlling: cpu 1
[ 0.639511] drop_monitor: Initializing network drop monitor service
[ 0.639624] TCP: cubic registered
[ 0.639747] NET: Registered protocol family 10
[ 0.639976] NET: Registered protocol family 17
[ 0.639996] Key type dns_resolver registered
[ 0.640276] Using IPI No-Shortcut mode
[ 0.640472] registered taskstats version 1
[ 0.640839] Magic number: 2:151:498
[ 0.640905] rtc_cmos 00:08: setting system clock to 2014-02-15 20:28:22 UTC (1392496102)
[ 0.641125] Freeing unused kernel memory: 612K (c15e8000 - c1681000)
[ 0.641141] Write protecting the kernel text: 4332k
[ 0.641172] Write protecting the kernel read-only data: 1284k
[ 0.642269] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.651983] systemd-udevd[47]: starting version 208
[ 0.654458] Linux agpgart interface v0.103
[ 0.655983] [drm] Initialized drm 1.1.0 20060810
[ 0.657342] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 0.657394] ACPI: Lid Switch [LID0]
[ 0.657501] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 0.657507] ACPI: Power Button [PWRB]
[ 0.657559] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 0.657563] ACPI: Sleep Button [TPAD]
[ 0.657650] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:01/input/input4
[ 0.657654] ACPI: Sleep Button [TSCR]
[ 0.657728] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 0.657732] ACPI: Power Button [PWRF]
[ 0.658284] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.658345] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 0.663195] [drm] Memory usable by graphics device = 2048M
[ 0.663201] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ 0.663203] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 0.663220] Console: switching to colour dummy device 80x25
[ 0.663332] i915 0000:00:02.0: setting latency timer to 64
[ 0.663840] i915 0000:00:02.0: irq 57 for MSI/MSI-X
[ 0.663853] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.663855] [drm] Driver supports precise vblank timestamp query.
[ 0.663950] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.725056] fbcon: inteldrmfb (fb0) is primary device
[ 1.295683] tsc: Refined TSC clocksource calibration: 1396.766 MHz
[ 2.295580] Switched to clocksource tsc
[ 2.335606] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.345505] Console: switching to colour frame buffer device 170x48
[ 2.351030] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.351033] i915 0000:00:02.0: registered panic notifier
[ 2.351052] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.405442] raid6: mmxx1 2696 MB/s
[ 2.462078] raid6: mmxx2 2748 MB/s
[ 2.518742] raid6: sse1x1 2254 MB/s
[ 2.575402] raid6: sse1x2 2737 MB/s
[ 2.632057] raid6: sse2x1 4585 MB/s
[ 2.688714] raid6: sse2x2 5558 MB/s
[ 2.688716] raid6: using algorithm sse2x2 (5558 MB/s)
[ 2.688718] raid6: using ssse3x1 recovery algorithm
[ 2.688909] xor: measuring software checksum speed
[ 2.722033] pIII_sse : 8482.800 MB/sec
[ 2.755361] prefetch64-sse: 9430.800 MB/sec
[ 2.755363] xor: using function: prefetch64-sse (9430.800 MB/sec)
[ 2.761573] bio: create slab <bio-1> at 1
[ 2.762476] Btrfs loaded
[ 2.794868] ACPI: bus type USB registered
[ 2.794902] usbcore: registered new interface driver usbfs
[ 2.794915] usbcore: registered new interface driver hub
[ 2.794963] usbcore: registered new device driver usb
[ 2.795880] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2.795886] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.795893] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.795982] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.796004] xhci_hcd 0000:00:14.0: irq 58 for MSI/MSI-X
[ 2.796233] hub 1-0:1.0: USB hub found
[ 2.796245] hub 1-0:1.0: 8 ports detected
[ 2.796564] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.796569] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.796802] hub 2-0:1.0: USB hub found
[ 2.796812] hub 2-0:1.0: 4 ports detected
[ 2.798121] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.798643] ehci-pci: EHCI PCI platform driver
[ 2.800076] SCSI subsystem initialized
[ 2.802615] libata version 3.00 loaded.
[ 2.806972] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.806984] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.806992] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 2.807008] ehci-pci 0000:00:1d.0: debug port 2
[ 2.810898] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.810922] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe051f800
[ 2.818956] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.819349] hub 3-0:1.0: USB hub found
[ 2.819360] hub 3-0:1.0: 2 ports detected
[ 2.819506] ahci 0000:00:1f.2: version 3.0
[ 2.819668] ahci 0000:00:1f.2: irq 59 for MSI/MSI-X
[ 2.819694] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.819712] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[ 2.819716] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo only pio slum part deso sadm apst
[ 2.819721] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.821269] scsi0 : ahci
[ 2.821764] scsi1 : ahci
[ 2.821833] ata1: SATA max UDMA/133 abar m2048@0xe051f000 port 0xe051f100 irq 59
[ 2.821836] ata2: DUMMY
[ 3.138725] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.139599] ata1.00: ATA-9: SanDisk SSD i110 16GB, i221000, max UDMA/133
[ 3.139605] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.140691] ata1.00: configured for UDMA/133
[ 3.140943] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD i110 i221 PQ: 0 ANSI: 5
[ 3.143122] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 3.143180] sd 0:0:0:0: [sda] Write Protect is off
[ 3.143184] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.143208] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.143838] sda: sda1
[ 3.144215] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.155320] usb 1-1: new full-speed USB device number 2 using xhci_hcd
[ 3.172936] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.173491] btrfs: device label Arch devid 1 transid 2371 /dev/sda1
[ 3.175435] usbcore: registered new interface driver usbhid
[ 3.175439] usbhid: USB HID core driver
[ 3.176221] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.0/input/input7
[ 3.176353] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 3.177370] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1:1.1/input/input8
[ 3.177816] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ 3.193667] btrfs: device label Arch devid 1 transid 2371 /dev/sda1
[ 3.194331] btrfs: disk space caching is enabled
[ 3.202588] Btrfs detected SSD devices, enabling SSD mode
[ 3.297853] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.298465] systemd[1]: Set hostname to <archie>.
[ 3.328632] usb 1-3: new high-speed USB device number 3 using xhci_hcd
[ 3.356825] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.356906] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.356925] systemd[1]: Starting Login Prompts.
[ 3.356939] systemd[1]: Reached target Login Prompts.
[ 3.356951] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
[ 3.356962] systemd[1]: Starting Remote File Systems.
[ 3.356972] systemd[1]: Reached target Remote File Systems.
[ 3.356983] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.357024] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.357035] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.357065] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.357076] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.357095] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.357105] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.357126] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.357136] systemd[1]: Starting Root Slice.
[ 3.357319] systemd[1]: Created slice Root Slice.
[ 3.357331] systemd[1]: Starting User and Session Slice.
[ 3.357419] systemd[1]: Created slice User and Session Slice.
[ 3.357431] systemd[1]: Starting System Slice.
[ 3.357501] systemd[1]: Created slice System Slice.
[ 3.357512] systemd[1]: Starting system-netctl.slice.
[ 3.357598] systemd[1]: Created slice system-netctl.slice.
[ 3.357609] systemd[1]: Starting system-getty.slice.
[ 3.357692] systemd[1]: Created slice system-getty.slice.
[ 3.357703] systemd[1]: Starting Slices.
[ 3.357714] systemd[1]: Reached target Slices.
[ 3.357727] systemd[1]: Starting Journal Socket.
[ 3.357779] systemd[1]: Listening on Journal Socket.
[ 3.358235] systemd[1]: Starting Apply Kernel Variables...
[ 3.358576] systemd[1]: Starting Journal Service...
[ 3.358950] systemd[1]: Started Journal Service.
[ 3.414921] systemd-journald[117]: Vacuuming done, freed 0 bytes
[ 3.501105] systemd-udevd[151]: starting version 208
[ 3.538030] usb 1-4: new full-speed USB device number 4 using xhci_hcd
[ 3.543297] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ 3.549866] usb 1-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[ 3.658579] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 3.784718] hub 3-1:1.0: USB hub found
[ 3.784800] hub 3-1:1.0: 8 ports detected
[ 3.935689] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.941678] ACPI: AC Adapter [AC] (on-line)
[ 3.958596] ACPI: Battery Slot [BAT0] (battery present)
[ 3.982833] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.982839] ACPI: Thermal Zone [THRM] (42 C)
[ 3.983062] ACPI: Requesting acpi_cpufreq
[ 4.010777] tpm_tis tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.012302] ACPI: Fan [TDP0] (off)
[ 4.012960] ACPI: Fan [TDP1] (on)
[ 4.024338] media: Linux media interface: v0.10
[ 4.028753] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 4.032851] Linux video capture interface: v2.00
[ 4.047280] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.050284] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b433)
[ 4.052720] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/input/input10
[ 4.052844] usbcore: registered new interface driver uvcvideo
[ 4.052846] USB Video Class driver (1.1.1)
[ 4.056928] btrfs: device label Arch devid 1 transid 2371 /dev/sda1
[ 4.059135] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[ 4.067553] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[ 4.089179] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 4.089239] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 4.089296] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 4.091198] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 4.105183] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 4.106651] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 4.107064] cfg80211: Calling CRDA to update world regulatory domain
[ 4.117993] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input14
[ 4.123498] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 4.127669] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
[ 4.135606] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 4.188206] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 4.191176] microcode: CPU0 updated to revision 0x17, date = 2013-09-14
[ 4.194998] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 4.195049] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 4.196830] microcode: CPU1 updated to revision 0x17, date = 2013-09-14
[ 4.197162] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.247188] tpm_inf_pnp 00:0d: Found TPM with ID IFX0102
[ 4.252807] Bluetooth: Core ver 2.16
[ 4.252827] NET: Registered protocol family 31
[ 4.252829] Bluetooth: HCI device and connection manager initialized
[ 4.252838] Bluetooth: HCI socket layer initialized
[ 4.252842] Bluetooth: L2CAP socket layer initialized
[ 4.252848] Bluetooth: SCO socket layer initialized
[ 4.259813] usbcore: registered new interface driver btusb
[ 4.294836] iTCO_vendor_support: vendor-support=0
[ 4.318009] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.318042] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1060)
[ 4.320063] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.365777] ath: phy0: ASPM enabled: 0x43
[ 4.365782] ath: EEPROM regdomain: 0x6a
[ 4.365785] ath: EEPROM indicates we should expect a direct regpair map
[ 4.365787] ath: Country alpha2 being used: 00
[ 4.365789] ath: Regpair used: 0x6a
[ 4.378099] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.381094] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xfb880000, irq=16
[ 4.395375] systemd-udevd[167]: renamed network interface wlan0 to wlp1s0
[ 4.410976] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 11.667809] wlp1s0: authenticate with 00:23:cd:18:68:6c
[ 11.687827] wlp1s0: send auth to 00:23:cd:18:68:6c (try 1/3)
[ 11.690267] wlp1s0: authenticated
[ 11.690555] wlp1s0: associate with 00:23:cd:18:68:6c (try 1/3)
[ 11.694075] wlp1s0: RX AssocResp from 00:23:cd:18:68:6c (capab=0x401 status=0 aid=1)
[ 11.694131] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 11.694277] wlp1s0: associated
[ 14.309014] fuse init (API version 7.22)Offline
#4 2014-02-16 08:10:36
- Rexilion
- Member
- Registered: 2013-12-23
- Posts: 784
Re: Toshiba Chromebook
[ 0.638140] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.638142] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.638795] i8042: Warning: Keylock activeTry booting with i8042.nopnp=1 on your kernel commandline. Then post your new dmesg.
fs/super.c : "Self-destruct in 5 seconds. Have a nice day...\n",
Offline
#5 2014-02-16 08:40:49
- mark_1
- Member
- Registered: 2014-02-15
- Posts: 10
Re: Toshiba Chromebook
thank you all for support!
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.9-1-ARCH (tobias@testing-i686) (gcc version 4.8.2 20131219 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Jan 26 09:15:23 CET 2014
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000002ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000030000-0x000000000003ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009e3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000000efffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000f00000-0x0000000000ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000001000000-0x000000007bf79fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bf7a000-0x000000007e9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed84000-0x00000000fed84fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000001005fffff] usable
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Toshiba Leon, BIOS 12/04/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x7bf7a max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 007C800000 mask 7FFF800000 uncachable
[ 0.000000] 2 base 007D000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 007E000000 mask 7FFE000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 write-combining
[ 0.000000] 5 base 00FF800000 mask 7FFF800000 uncachable
[ 0.000000] 6 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37000000-0x373fffff]
[ 0.000000] [mem 0x37000000-0x373fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x30000000-0x36ffffff]
[ 0.000000] [mem 0x30000000-0x36ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x00efffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x00bfffff] page 2M
[ 0.000000] [mem 0x00c00000-0x00efffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x01000000-0x2fffffff]
[ 0.000000] [mem 0x01000000-0x2fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37400000-0x377fdfff]
[ 0.000000] [mem 0x37400000-0x377fdfff] page 4k
[ 0.000000] BRK [0x0177c000, 0x0177cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x37900000-0x37c77fff]
[ 0.000000] Allocated new RAMDISK: [mem 0x37486000-0x377fdb8f]
[ 0.000000] Move RAMDISK from [mem 0x37900000-0x37c77b8f] to [mem 0x37486000-0x377fdb8f]
[ 0.000000] ACPI: RSDP 000fdbb0 00024 (v02 CORE )
[ 0.000000] ACPI: XSDT 7bf840e0 00054 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: FACP 7bf88690 000F4 (v03 CORE COREBOOT 00000000 CORE 00000001)
[ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20130725/tbfadt-202)
[ 0.000000] ACPI: DSDT 7bf84250 04431 (v02 COREv4 COREBOOT 20110725 INTL 20090123)
[ 0.000000] ACPI: FACS 7bf84210 00040
[ 0.000000] ACPI: HPET 7bf88790 00038 (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: APIC 7bf887d0 0005C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: MCFG 7bf88830 0003C (v01 CORE COREBOOT 00000000 CORE 00000000)
[ 0.000000] ACPI: SSDT 7bf89730 008A0 (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: SSDT 7bf89fd0 0005C (v02 CORE COREBOOT 0000002A CORE 0000002A)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1095MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] BRK [0x0177d000, 0x0177dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x377fdfff]
[ 0.000000] HighMem [mem 0x377fe000-0x7bf79fff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0002ffff]
[ 0.000000] node 0: [mem 0x00040000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x00efffff]
[ 0.000000] node 0: [mem 0x01000000-0x7bf79fff]
[ 0.000000] On node 0 totalpages: 507399
[ 0.000000] free_area_init_node: node 0, pgdat c15d6640, node_mem_map f6506020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3725 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 223230 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2191 pages used for memmap
[ 0.000000] HighMem zone: 280444 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 56
[ 0.000000] PM: Registered nosave memory: [mem 0x00030000-0x0003ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00f00000-0x00ffffff]
[ 0.000000] e820: [mem 0x7ea00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f64de000 s33408 r0 d23936 u57344
[ 0.000000] pcpu-alloc: s33408 r0 d23936 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505623
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b726a4e0-dd32-4284-aa06-1634c120f63a rw quiet add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic lapic i8042.nopnp=1
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 4062152 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bf7a)
[ 0.000000] Memory: 1997500K/2029596K available (4328K kernel code, 431K rwdata, 1280K rodata, 612K init, 952K bss, 32096K reserved, 1121776K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc15e8000 - 0xc1681000 ( 612 kB)
.data : 0xc143a39e - 0xc15e7c40 (1718 kB)
.text : 0xc1000000 - 0xc143a39e (4328 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=f5c08000 soft=f5c0a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 1396.841 MHz processor
[ 0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 2794.08 BogoMIPS (lpj=4656136)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000046] Security Framework initialized
[ 0.000055] AppArmor: AppArmor disabled by boot time parameter
[ 0.000056] Yama: becoming mindful.
[ 0.000072] Mount-cache hash table entries: 512
[ 0.000330] Initializing cgroup subsys memory
[ 0.000338] Initializing cgroup subsys devices
[ 0.000341] Initializing cgroup subsys freezer
[ 0.000343] Initializing cgroup subsys net_cls
[ 0.000345] Initializing cgroup subsys blkio
[ 0.000380] CPU: Physical Processor ID: 0
[ 0.000382] CPU: Processor Core ID: 0
[ 0.003066] mce: CPU supports 7 MCE banks
[ 0.003084] CPU0: Thermal monitoring enabled (TM1)
[ 0.003103] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
tlb_flushall_shift: 6
[ 0.003297] Freeing SMP alternatives memory: 20K (c1681000 - c1686000)
[ 0.004396] ACPI: Core revision 20130725
[ 0.007470] ACPI: All ACPI Tables successfully acquired
[ 0.008807] ftrace: allocating 19323 entries in 38 pages
[ 0.020375] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.020996] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.053999] smpboot: CPU0: Intel(R) Celeron(R) 2955U @ 1.40GHz (fam: 06, model: 45, stepping: 01)
[ 0.054007] TSC deadline timer enabled
[ 0.054016] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.054027] ... version: 3
[ 0.054028] ... bit width: 48
[ 0.054030] ... generic registers: 8
[ 0.054031] ... value mask: 0000ffffffffffff
[ 0.054033] ... max period: 0000ffffffffffff
[ 0.054035] ... fixed-purpose events: 3
[ 0.054036] ... event mask: 00000007000000ff
[ 0.080827] CPU 1 irqstacks, hard=f5cce000 soft=f5cd8000
[ 0.080830] smpboot: Booting Node 0, Processors # 1 OK
[ 0.091126] Initializing CPU#1
[ 0.096725] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.096741] Brought up 2 CPUs
[ 0.096744] smpboot: Total of 2 processors activated (5589.17 BogoMIPS)
[ 0.098842] devtmpfs: initialized
[ 0.100378] RTC time: 8:35:39, date: 02/16/14
[ 0.100438] NET: Registered protocol family 16
[ 0.100661] cpuidle: using governor ladder
[ 0.100663] cpuidle: using governor menu
[ 0.100800] ACPI: bus type PCI registered
[ 0.100803] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.100870] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.100873] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.100875] PCI: Using MMCONFIG for extended config space
[ 0.100877] PCI: Using configuration type 1 for base access
[ 0.101778] bio: create slab <bio-0> at 0
[ 0.101921] ACPI: Added _OSI(Module Device)
[ 0.101923] ACPI: Added _OSI(Processor Device)
[ 0.101925] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.101927] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.103064] ACPI: EC: Look up EC in DSDT
[ 0.112086] ACPI: Interpreter enabled
[ 0.112098] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.112105] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.112122] ACPI: (supports S0 S3 S4 S5)
[ 0.112124] ACPI: Using IOAPIC for interrupt routing
[ 0.112149] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.112295] ACPI: No dock devices found.
[ 0.123591] ACPI: Power Resource [TNP0] (off)
[ 0.123630] ACPI: Power Resource [TNP1] (on)
[ 0.124131] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.124169] acpi PNP0A08:00: Requesting ACPI _OSC control (0x1d)
[ 0.124198] acpi PNP0A08:00: ACPI _OSC control (0x1d) granted
[ 0.124314] acpi PNP0A08:00: ignoring host bridge window [mem 0x000cc000-0x000cffff] (conflicts with Video ROM [mem 0x000c0000-0x000cebff])
[ 0.124320] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.124556] PCI host bridge to bus 0000:00
[ 0.124560] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.124563] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.124565] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.124568] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.124570] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.124573] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.124575] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.124578] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.124580] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.124583] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.124585] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.124588] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
[ 0.124590] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
[ 0.124592] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
[ 0.124595] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
[ 0.124597] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff]
[ 0.124600] pci_bus 0000:00: root bus resource [mem 0x7ea00001-0xfebfffff]
[ 0.124602] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
[ 0.124614] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.124742] pci 0000:00:02.0: [8086:0a06] type 00 class 0x030000
[ 0.124760] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ 0.124770] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.124778] pci 0000:00:02.0: reg 0x20: [io 0x1800-0x183f]
[ 0.124898] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.124910] pci 0000:00:03.0: reg 0x10: [mem 0xe0510000-0xe0513fff 64bit]
[ 0.125055] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.125078] pci 0000:00:14.0: reg 0x10: [mem 0xe0500000-0xe050ffff 64bit]
[ 0.125148] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.125207] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.125256] pci 0000:00:15.0: [8086:9c60] type 00 class 0x080102
[ 0.125276] pci 0000:00:15.0: reg 0x10: [mem 0xe0518000-0xe0518fff]
[ 0.125289] pci 0000:00:15.0: reg 0x14: [mem 0xe0519000-0xe0519fff]
[ 0.125450] pci 0000:00:15.1: [8086:9c61] type 00 class 0x0c8000
[ 0.125471] pci 0000:00:15.1: reg 0x10: [mem 0xe051a000-0xe051afff]
[ 0.125483] pci 0000:00:15.1: reg 0x14: [mem 0xe051b000-0xe051bfff]
[ 0.125645] pci 0000:00:15.2: [8086:9c62] type 00 class 0x0c8000
[ 0.125665] pci 0000:00:15.2: reg 0x10: [mem 0xe051c000-0xe051cfff]
[ 0.125678] pci 0000:00:15.2: reg 0x14: [mem 0xe051d000-0xe051dfff]
[ 0.125849] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.125866] pci 0000:00:1b.0: reg 0x10: [mem 0xe0514000-0xe0517fff 64bit]
[ 0.125941] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.126001] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.126046] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 0.126120] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.126236] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.126260] pci 0000:00:1d.0: reg 0x10: [mem 0xe051f800-0xe051fbff]
[ 0.126364] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.126426] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.126473] pci 0000:00:1f.0: [8086:9c45] type 00 class 0x060100
[ 0.126688] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.126707] pci 0000:00:1f.2: reg 0x10: [io 0x1860-0x1867]
[ 0.126716] pci 0000:00:1f.2: reg 0x14: [io 0x1870-0x1873]
[ 0.126732] pci 0000:00:1f.2: reg 0x18: [io 0x1868-0x186f]
[ 0.126741] pci 0000:00:1f.2: reg 0x1c: [io 0x1874-0x1877]
[ 0.126750] pci 0000:00:1f.2: reg 0x20: [io 0x1840-0x185f]
[ 0.126760] pci 0000:00:1f.2: reg 0x24: [mem 0xe051f000-0xe051f7ff]
[ 0.126803] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.126897] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.126914] pci 0000:00:1f.3: reg 0x10: [mem 0xe051fc00-0xe051fcff 64bit]
[ 0.126939] pci 0000:00:1f.3: reg 0x20: [io 0x0400-0x041f]
[ 0.127053] pci 0000:00:1f.6: [8086:9c24] type 00 class 0x118000
[ 0.127088] pci 0000:00:1f.6: reg 0x10: [mem 0xe051e000-0xe051efff 64bit]
[ 0.127358] pci 0000:01:00.0: [168c:0034] type 00 class 0x028000
[ 0.127384] pci 0000:01:00.0: reg 0x10: [mem 0xe0400000-0xe047ffff 64bit]
[ 0.127445] pci 0000:01:00.0: reg 0x30: [mem 0xe0480000-0xe048ffff pref]
[ 0.127504] pci 0000:01:00.0: supports D1
[ 0.127506] pci 0000:01:00.0: PME# supported from D0 D1 D3hot
[ 0.133434] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.133441] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.133456] pci_bus 0000:00: on NUMA node 0
[ 0.133655] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.133718] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10, disabled.
[ 0.133776] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11, disabled.
[ 0.133833] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15), disabled.
[ 0.133890] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.133947] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.134004] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.134061] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.134515] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.134566] Found 1 acpi root devices
[ 0.134611] ACPI: EC: GPE = 0x24, I/O: command/status = 0x66, data = 0x62
[ 0.134702] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.134706] vgaarb: loaded
[ 0.134708] vgaarb: bridge control possible 0000:00:02.0
[ 0.134749] PCI: Using ACPI for IRQ routing
[ 0.136409] PCI: pci_cache_line_size set to 64 bytes
[ 0.136462] e820: reserve RAM buffer [mem 0x0009e400-0x0009ffff]
[ 0.136465] e820: reserve RAM buffer [mem 0x7bf7a000-0x7bffffff]
[ 0.136574] NetLabel: Initializing
[ 0.136576] NetLabel: domain hash size = 128
[ 0.136577] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.136591] NetLabel: unlabeled traffic allowed by default
[ 0.136718] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.136726] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.138753] Switched to clocksource hpet
[ 0.145219] pnp: PnP ACPI init
[ 0.145236] ACPI: bus type PNP registered
[ 0.145302] pnp 00:00: Plug and Play ACPI device, IDs PNP0c0e (active)
[ 0.145344] pnp 00:01: Plug and Play ACPI device, IDs PNP0c0e (active)
[ 0.145408] system 00:02: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.145412] system 00:02: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.145415] system 00:02: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.145425] system 00:02: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.145429] system 00:02: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.145431] system 00:02: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.145434] system 00:02: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.145437] system 00:02: [mem 0xfed45000-0xfed8ffff] could not be reserved
[ 0.145440] system 00:02: [mem 0x00f00000-0x00ffffff] has been reserved
[ 0.145444] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.145632] pnp 00:03: [dma 4]
[ 0.145661] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.145700] pnp 00:04: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.145802] system 00:05: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.145806] system 00:05: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.145847] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.145918] system 00:07: [io 0x1000-0x10fe] could not be reserved
[ 0.145922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.145955] pnp 00:08: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.146003] system 00:09: [io 0x0900-0x09fe] has been reserved
[ 0.146007] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146055] system 00:0a: [io 0x0200] has been reserved
[ 0.146057] system 00:0a: [io 0x0204] has been reserved
[ 0.146060] system 00:0a: [io 0x0800-0x087f] has been reserved
[ 0.146063] system 00:0a: [io 0x0880-0x08ff] has been reserved
[ 0.146066] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146111] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.146156] pnp 00:0c: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 0.146206] pnp 00:0d: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.146316] system 00:0e: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.146498] pnp 00:0f: Plug and Play ACPI device, IDs INT33c7 (active)
[ 0.146516] pnp: PnP ACPI: found 16 devices
[ 0.146518] ACPI: bus type PNP unregistered
[ 0.183326] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.183333] pci 0000:00:1c.0: bridge window [mem 0xe0400000-0xe04fffff]
[ 0.183344] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.183347] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.183350] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.183352] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.183354] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.183357] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.183359] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.183362] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.183364] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.183367] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.183369] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.183371] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.183374] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.183376] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.183379] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.183381] pci_bus 0000:00: resource 19 [mem 0x7ea00001-0xfebfffff]
[ 0.183384] pci_bus 0000:00: resource 20 [mem 0xfed40000-0xfed44fff]
[ 0.183387] pci_bus 0000:01: resource 1 [mem 0xe0400000-0xe04fffff]
[ 0.183431] NET: Registered protocol family 2
[ 0.183627] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.183647] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.183665] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.183682] TCP: reno registered
[ 0.183685] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.183691] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.183752] NET: Registered protocol family 1
[ 0.183766] pci 0000:00:02.0: Boot video device
[ 0.184248] PCI: CLS 64 bytes, default 64
[ 0.184294] Unpacking initramfs...
[ 0.292644] Freeing initrd memory: 3552K (f7486000 - f77fe000)
[ 0.292882] apm: BIOS not found.
[ 0.292913] Scanning for low memory corruption every 60 seconds
[ 0.293222] audit: initializing netlink socket (disabled)
[ 0.293234] type=2000 audit(1392539739.293:1): initialized
[ 0.311209] bounce pool size: 64 pages
[ 0.311221] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.312898] zbud: loaded
[ 0.313020] VFS: Disk quotas dquot_6.5.2
[ 0.313081] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.313295] msgmni has been set to 1717
[ 0.313574] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.313610] io scheduler noop registered
[ 0.313613] io scheduler deadline registered
[ 0.313647] io scheduler cfq registered (default)
[ 0.313885] pcieport 0000:00:1c.0: irq 56 for MSI/MSI-X
[ 0.314005] aer 0000:00:1c.0:pcie02: service driver aer loaded
[ 0.314022] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.314024] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.314029] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.314044] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.314063] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.314121] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.314123] vesafb: scrolling: redraw
[ 0.314126] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.314370] vesafb: framebuffer at 0xd0000000, mapped to 0xf8080000, using 4160k, total 4160k
[ 0.319767] Console: switching to colour frame buffer device 170x48
[ 0.325002] fb0: VESA VGA frame buffer device
[ 0.325017] intel_idle: MWAIT substates: 0x11142120
[ 0.325019] intel_idle: v0.4 model 0x45
[ 0.325021] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.325157] GHES: HEST is not enabled!
[ 0.325172] isapnp: Scanning for PnP cards...
[ 0.636722] isapnp: No Plug & Play device found
[ 0.636795] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.637673] i8042: PNP detection disabled
[ 0.638328] i8042: Warning: Keylock active
[ 0.639116] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.639284] mousedev: PS/2 mouse device common for all mice
[ 0.639366] rtc_cmos 00:08: RTC can wake from S4
[ 0.639515] rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
[ 0.639546] rtc_cmos 00:08: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.639766] Intel P-state driver initializing.
[ 0.639782] Intel pstate controlling: cpu 0
[ 0.639801] Intel pstate controlling: cpu 1
[ 0.639872] drop_monitor: Initializing network drop monitor service
[ 0.640013] TCP: cubic registered
[ 0.640152] NET: Registered protocol family 10
[ 0.640380] NET: Registered protocol family 17
[ 0.640390] Key type dns_resolver registered
[ 0.640751] Using IPI No-Shortcut mode
[ 0.641181] registered taskstats version 1
[ 0.641618] Magic number: 2:54:574
[ 0.641700] rtc_cmos 00:08: setting system clock to 2014-02-16 08:35:40 UTC (1392539740)
[ 0.641935] Freeing unused kernel memory: 612K (c15e8000 - c1681000)
[ 0.641952] Write protecting the kernel text: 4332k
[ 0.641982] Write protecting the kernel read-only data: 1284k
[ 0.642388] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.653011] systemd-udevd[48]: starting version 208
[ 0.655522] Linux agpgart interface v0.103
[ 0.657032] [drm] Initialized drm 1.1.0 20060810
[ 0.658355] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.658407] ACPI: Lid Switch [LID0]
[ 0.658477] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 0.658482] ACPI: Power Button [PWRB]
[ 0.658548] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 0.658552] ACPI: Sleep Button [TPAD]
[ 0.658603] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:01/input/input5
[ 0.658607] ACPI: Sleep Button [TSCR]
[ 0.658685] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 0.658689] ACPI: Power Button [PWRF]
[ 0.659253] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 0.659311] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7
[ 0.664839] [drm] Memory usable by graphics device = 2048M
[ 0.664845] checking generic (d0000000 410000) vs hw (d0000000 10000000)
[ 0.664847] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 0.664864] Console: switching to colour dummy device 80x25
[ 0.664978] i915 0000:00:02.0: setting latency timer to 64
[ 0.665372] i915 0000:00:02.0: irq 57 for MSI/MSI-X
[ 0.665384] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 0.665385] [drm] Driver supports precise vblank timestamp query.
[ 0.665478] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.724664] fbcon: inteldrmfb (fb0) is primary device
[ 1.295316] tsc: Refined TSC clocksource calibration: 1396.766 MHz
[ 2.295200] Switched to clocksource tsc
[ 2.345249] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 2.365124] Console: switching to colour frame buffer device 170x48
[ 2.370651] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 2.370653] i915 0000:00:02.0: registered panic notifier
[ 2.370672] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.425046] raid6: mmxx1 2695 MB/s
[ 2.481706] raid6: mmxx2 2750 MB/s
[ 2.538356] raid6: sse1x1 2265 MB/s
[ 2.595032] raid6: sse1x2 2737 MB/s
[ 2.651679] raid6: sse2x1 4583 MB/s
[ 2.708327] raid6: sse2x2 5557 MB/s
[ 2.708329] raid6: using algorithm sse2x2 (5557 MB/s)
[ 2.708331] raid6: using ssse3x1 recovery algorithm
[ 2.708523] xor: measuring software checksum speed
[ 2.741653] pIII_sse : 8588.400 MB/sec
[ 2.774981] prefetch64-sse: 9430.800 MB/sec
[ 2.774983] xor: using function: prefetch64-sse (9430.800 MB/sec)
[ 2.781015] bio: create slab <bio-1> at 1
[ 2.781924] Btrfs loaded
[ 2.814461] ACPI: bus type USB registered
[ 2.814495] usbcore: registered new interface driver usbfs
[ 2.814507] usbcore: registered new interface driver hub
[ 2.815091] usbcore: registered new device driver usb
[ 2.815797] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.815985] ehci-pci: EHCI PCI platform driver
[ 2.816151] ehci-pci 0000:00:1d.0: setting latency timer to 64
[ 2.816162] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.816169] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 2.816184] ehci-pci 0000:00:1d.0: debug port 2
[ 2.817598] SCSI subsystem initialized
[ 2.819540] libata version 3.00 loaded.
[ 2.820077] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.820099] ehci-pci 0000:00:1d.0: irq 19, io mem 0xe051f800
[ 2.828323] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.828670] hub 1-0:1.0: USB hub found
[ 2.828678] hub 1-0:1.0: 2 ports detected
[ 2.828837] ahci 0000:00:1f.2: version 3.0
[ 2.829262] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
[ 2.829292] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 2.841655] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[ 2.841662] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo only pio slum part deso sadm apst
[ 2.841667] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.842027] scsi0 : ahci
[ 2.842127] scsi1 : ahci
[ 2.842182] ata1: SATA max UDMA/133 abar m2048@0xe051f000 port 0xe051f100 irq 58
[ 2.842184] ata2: DUMMY
[ 2.842353] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 2.842357] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.842364] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.842453] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.842476] xhci_hcd 0000:00:14.0: irq 59 for MSI/MSI-X
[ 2.842731] hub 2-0:1.0: USB hub found
[ 2.842745] hub 2-0:1.0: 8 ports detected
[ 2.843057] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.843062] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 2.843307] hub 3-0:1.0: USB hub found
[ 2.843324] hub 3-0:1.0: 4 ports detected
[ 3.135078] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 3.161677] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 3.162151] ata1.00: ATA-9: SanDisk SSD i110 16GB, i221000, max UDMA/133
[ 3.162157] ata1.00: 31277232 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 3.163264] ata1.00: configured for UDMA/133
[ 3.163536] scsi 0:0:0:0: Direct-Access ATA SanDisk SSD i110 i221 PQ: 0 ANSI: 5
[ 3.165691] sd 0:0:0:0: [sda] 31277232 512-byte logical blocks: (16.0 GB/14.9 GiB)
[ 3.165788] sd 0:0:0:0: [sda] Write Protect is off
[ 3.165794] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.165812] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.166469] sda: sda1
[ 3.167348] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.195714] btrfs: device label Arch devid 1 transid 2408 /dev/sda1
[ 3.211779] btrfs: device label Arch devid 1 transid 2408 /dev/sda1
[ 3.212424] btrfs: disk space caching is enabled
[ 3.219564] Btrfs detected SSD devices, enabling SSD mode
[ 3.258862] hub 1-1:1.0: USB hub found
[ 3.258949] hub 1-1:1.0: 8 ports detected
[ 3.313576] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 3.314097] systemd[1]: Set hostname to <archie>.
[ 3.371286] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.371368] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.371386] systemd[1]: Starting Login Prompts.
[ 3.371400] systemd[1]: Reached target Login Prompts.
[ 3.371412] systemd[1]: Expecting device sys-subsystem-net-devices-wlp1s0.device...
[ 3.371423] systemd[1]: Starting Remote File Systems.
[ 3.371433] systemd[1]: Reached target Remote File Systems.
[ 3.371444] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.371484] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.371495] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.371525] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.371534] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.371568] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.371578] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.371600] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.371610] systemd[1]: Starting Root Slice.
[ 3.371805] systemd[1]: Created slice Root Slice.
[ 3.371816] systemd[1]: Starting User and Session Slice.
[ 3.371902] systemd[1]: Created slice User and Session Slice.
[ 3.371914] systemd[1]: Starting System Slice.
[ 3.371983] systemd[1]: Created slice System Slice.
[ 3.371993] systemd[1]: Starting system-netctl.slice.
[ 3.372079] systemd[1]: Created slice system-netctl.slice.
[ 3.372090] systemd[1]: Starting system-getty.slice.
[ 3.372171] systemd[1]: Created slice system-getty.slice.
[ 3.372181] systemd[1]: Starting Slices.
[ 3.372192] systemd[1]: Reached target Slices.
[ 3.372205] systemd[1]: Starting Journal Socket.
[ 3.372258] systemd[1]: Listening on Journal Socket.
[ 3.372724] systemd[1]: Starting Apply Kernel Variables...
[ 3.373061] systemd[1]: Starting Journal Service...
[ 3.373398] systemd[1]: Started Journal Service.
[ 3.418232] usb 2-1: new full-speed USB device number 2 using xhci_hcd
[ 3.428629] systemd-journald[117]: Vacuuming done, freed 0 bytes
[ 3.508856] systemd-journald[117]: Received request to flush runtime journal from PID 1
[ 3.509418] systemd-udevd[150]: starting version 208
[ 3.591546] usb 2-3: new high-speed USB device number 3 using xhci_hcd
[ 3.715640] ACPI: Requesting acpi_cpufreq
[ 3.740506] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.741205] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.798179] usb 2-4: new full-speed USB device number 4 using xhci_hcd
[ 3.812766] usb 2-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
[ 3.962599] thermal LNXTHERM:00: registered as thermal_zone0
[ 3.962604] ACPI: Thermal Zone [THRM] (47 C)
[ 3.975610] ACPI: AC Adapter [AC] (off-line)
[ 3.978210] usbcore: registered new interface driver usbhid
[ 3.978214] usbhid: USB HID core driver
[ 3.993579] ACPI: Battery Slot [BAT0] (battery present)
[ 4.032517] snd_hda_intel 0000:00:03.0: irq 60 for MSI/MSI-X
[ 4.034541] snd_hda_intel 0000:00:1b.0: irq 61 for MSI/MSI-X
[ 4.034707] ACPI: Fan [TDP0] (off)
[ 4.035153] ACPI: Fan [TDP1] (on)
[ 4.035410] tpm_tis tpm_tis: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.093541] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 4.098998] hda_codec: invalid CONNECT_LIST verb 5[1]:0
[ 4.099058] hda_codec: invalid CONNECT_LIST verb 6[1]:0
[ 4.099120] hda_codec: invalid CONNECT_LIST verb 7[1]:0
[ 4.099496] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
[ 4.101508] input: HDA Intel MID HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 4.101631] input: HDA Intel MID HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
[ 4.101723] input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input10
[ 4.105312] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 4.105842] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 4.107120] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 4.108031] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 4.108443] iTCO_vendor_support: vendor-support=0
[ 4.111125] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 4.111156] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1060)
[ 4.111771] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.123017] media: Linux media interface: v0.10
[ 4.132248] Linux video capture interface: v2.00
[ 4.142524] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x15
[ 4.145486] microcode: CPU0 updated to revision 0x17, date = 2013-09-14
[ 4.159066] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 4.159122] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x15
[ 4.160899] microcode: CPU1 updated to revision 0x17, date = 2013-09-14
[ 4.160961] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.183412] btrfs: device label Arch devid 1 transid 2408 /dev/sda1
[ 4.199701] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/input/input15
[ 4.199850] hid-generic 0003:046D:C52F.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-1/input0
[ 4.200637] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.1/input/input16
[ 4.200760] hid-generic 0003:046D:C52F.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-1/input1
[ 4.253340] uvcvideo: Found UVC 1.00 device TOSHIBA Web Camera - HD (04f2:b433)
[ 4.257620] cfg80211: Calling CRDA to update world regulatory domain
[ 4.258825] input: TOSHIBA Web Camera - HD as /devices/pci0000:00/0000:00:14.0/usb2/2-3/2-3:1.0/input/input17
[ 4.258905] usbcore: registered new interface driver uvcvideo
[ 4.258907] USB Video Class driver (1.1.1)
[ 4.272998] tpm_inf_pnp 00:0d: Found TPM with ID IFX0102
[ 4.274122] Bluetooth: Core ver 2.16
[ 4.274139] NET: Registered protocol family 31
[ 4.274141] Bluetooth: HCI device and connection manager initialized
[ 4.274149] Bluetooth: HCI socket layer initialized
[ 4.274152] Bluetooth: L2CAP socket layer initialized
[ 4.274164] Bluetooth: SCO socket layer initialized
[ 4.328004] usbcore: registered new interface driver btusb
[ 4.416370] ath: phy0: ASPM enabled: 0x43
[ 4.416375] ath: EEPROM regdomain: 0x6a
[ 4.416377] ath: EEPROM indicates we should expect a direct regpair map
[ 4.416380] ath: Country alpha2 being used: 00
[ 4.416381] ath: Regpair used: 0x6a
[ 4.424663] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 4.425328] ieee80211 phy0: Atheros AR9462 Rev:2 mem=0xfb800000, irq=16
[ 4.445314] systemd-udevd[160]: renamed network interface wlan0 to wlp1s0
[ 4.614754] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 8.181805] wlp1s0: authenticate with 00:23:cd:18:68:6c
[ 8.201384] wlp1s0: send auth to 00:23:cd:18:68:6c (try 1/3)
[ 8.203777] wlp1s0: authenticated
[ 11.760828] wlp1s0: associate with 00:23:cd:18:68:6c (try 1/3)
[ 11.764340] wlp1s0: RX AssocResp from 00:23:cd:18:68:6c (capab=0x401 status=0 aid=2)
[ 11.764389] wlp1s0: associated
[ 11.764420] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 11.764626] wlp1s0: deauthenticating from 00:23:cd:18:68:6c by local choice (reason=3)
[ 11.771280] cfg80211: Calling CRDA to update world regulatory domain
[ 12.034134] fuse init (API version 7.22)
[ 15.403667] wlp1s0: authenticate with 00:23:cd:18:68:6c
[ 15.415208] wlp1s0: send auth to 00:23:cd:18:68:6c (try 1/3)
[ 15.417728] wlp1s0: authenticated
[ 15.419690] wlp1s0: associate with 00:23:cd:18:68:6c (try 1/3)
[ 15.423205] wlp1s0: RX AssocResp from 00:23:cd:18:68:6c (capab=0x401 status=0 aid=2)
[ 15.423253] wlp1s0: associatedin particular
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b726a4e0-dd32-4284-aa06-1634c120f63a rw quiet add_efi_memmap boot=local noresume noswap i915.modeset=1 tpm_tis.force=1 tpm_tis.interrupts=0 nmi_watchdog=panic lapic i8042.nopnp=1
[ 0.637673] i8042: PNP detection disabled
[ 0.638328] i8042: Warning: Keylock active
[ 0.639116] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.642388] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1Offline
#6 2014-02-16 09:42:40
- Rexilion
- Member
- Registered: 2013-12-23
- Posts: 784
Re: Toshiba Chromebook
Okay, that was an utter failure...
I took a look at the patches. They were published in october last year. Some more fixes might have came in.
You might not like this, but I suggest you try a git kernel -> v3.14-rc2. Personally, I use the vanilla kernel and a custom script for initcpio. But there seems to be an aur git package.
Could you also please specify the exact make/model/id of your chromebook?
fs/super.c : "Self-destruct in 5 seconds. Have a nice day...\n",
Offline
#7 2014-02-16 10:58:44
- mark_1
- Member
- Registered: 2014-02-15
- Posts: 10
Re: Toshiba Chromebook
ok, i'm downloading...
btw, my chromebook is a
Toshiba chromebook CB35-A3120
did you mean this?
UPDATE
i found this https://aur.archlinux.org/packages/linux-mainline that is linux-kernel in rc2 instead of the git version (still in rc1)....
i can't understand if the mainline version have arch patches in or not, btw, i'm trying the mainline version.
Last edited by mark_1 (2014-02-16 11:13:38)
Offline
#8 2014-02-16 11:30:56
- Rexilion
- Member
- Registered: 2013-12-23
- Posts: 784
Re: Toshiba Chromebook
ArchLinux only applies patches if it's really necessary. If you want a 'franken' kernel, use Ubuntu. In Arch vanilla (upstream) = arch (stock). That mainline kernel has these modifications:
0001-syscalls.h-use-gcc-alias-instead-of-assembler-aliase.patch # fix symbols (probably for external modules like nvidia)
change-default-console-loglevel.patch # make the kernel more silent by default
criu-no-expert.patch # enables something without the use of the EXPERT switch
So, nothing big. You mostly want an ArchLinux kernel for the automatic updates. You can even use mkinitcpio on a a stripped monolithic upstream custom kernel (like me).
fs/super.c : "Self-destruct in 5 seconds. Have a nice day...\n",
Offline
#9 2014-02-16 11:45:41
- Rexilion
- Member
- Registered: 2013-12-23
- Posts: 784
Re: Toshiba Chromebook
2b8454a platform/chrome: unregister platform driver/device when module exit
6d3c1af platform/chrome: Make i2c_adapter_names static
cdddd23 platform/chrome: chromeos_laptop - fix incorrect placement of __initdata tag
9ad3692 platform/chrome: chromeos_laptop - Use deferred probing
ec199dd platform/chrome: chromeos_laptop - Restructure device associations
9742e12 platform/chrome: Add pstore platform_deviceThe last commit moved the platform specific driver from drivers/platform/x86 to drivers/platform. The above are comitted after v3.13 and before v3.14-rc. It doesn't look promising, but it's worth a try. Furthermore, the Kconfig says this:
drivers/platform/chrome/Kconfig wrote:
config CHROMEOS_LAPTOP
tristate "Chrome OS Laptop"
depends on I2C
depends on DMI
---help---
This driver instantiates i2c and smbus devices such as
light sensors and touchpads.If you have a supported Chromebook, choose Y or M here.
The module will be called chromeos_laptop.
It mentions touchpads, so that could be it. It should be enabled by default (don't worry), but now we know where to look.
I Googled your model number, it's only listed at retail and review sites. It's pretty new I guess. At worst, you have to mail the linux kernel mailing list to add support for your model. I guess Toshiba didn't do that (yet). It could be that the driver has not been taught to recognize your shiny new model.
Ow btw, I also found references to claim Google Drive space before using Linux on these machines. I hope you did that.
Last edited by Rexilion (2014-02-16 11:46:19)
fs/super.c : "Self-destruct in 5 seconds. Have a nice day...\n",
Offline
#10 2014-02-17 09:33:48
- mark_1
- Member
- Registered: 2014-02-15
- Posts: 10
Re: Toshiba Chromebook
sorry, i-'m in late...
btw, nor the mainline neither the git packets can be installed, i'm now starting to build the kernel from source, but it will take some time...
Offline
#11 2014-02-17 10:02:35
- Rexilion
- Member
- Registered: 2013-12-23
- Posts: 784
Re: Toshiba Chromebook
Okay, that is not a problem. Make sure you have CHROMEOS_LAPTOP enabled. Does not matter if it's a module or build in.
fs/super.c : "Self-destruct in 5 seconds. Have a nice day...\n",
Offline
#12 2014-02-17 17:24:35
- mark_1
- Member
- Registered: 2014-02-15
- Posts: 10
Re: Toshiba Chromebook
lil' update:
i spent the whole mornig trying to run the mainline (or the git) kernel...in the meanwhile rc3 was out...
Ok, no probs, i'm NOW compiling the new linux-3-14rc3 with google chrome driver.
Start at 18:16
2 cores haswell intel celeron 1.4Ghz using the "-2" option with make.
let's see how long it takes!
PS: I made really few kernels by me...but despite this I could not resist and i make some (pretty random XP) mods to che .config....
Hoping it will not be a kernel panic!
EDIT:
What? I've just done!
Uhm....let's reboot!
Last edited by mark_1 (2014-02-17 17:26:01)
Offline
#13 2014-02-17 17:38:28
- Rexilion
- Member
- Registered: 2013-12-23
- Posts: 784
Re: Toshiba Chromebook
I hope you used '-j2' instead of '-2'. Make sure to install the modules. And yes, you could strip your kernel of all the stuff you don't need. My bzImage is 4,3 MB and that includes *everything* I need to power this laptop and it's periphals.
A stock kernel contains a 3,5 MB bzImage and maybe 50MB of modules?
If you start stripping, please tell so I can post you a list of definitly required options. Otherwise you might start to grow grey hair.
fs/super.c : "Self-destruct in 5 seconds. Have a nice day...\n",
Offline
#14 2014-07-03 04:12:39
- mshan
- Member
- Registered: 2013-05-05
- Posts: 105
Re: Toshiba Chromebook
mark_1 wrote:
btw, my chromebook is a
Toshiba chromebook CB35-A3120
I am also thinking to buy Toshiba Chromebook CB35-A3120 to install Arch Linux on it.
Are you still using Arch on it? How is that?
Can you solve your problem:
mark_1 wrote:
by the way, i've 3 important problems (or 2?):
1- i'm still not able to get my touchpad work (neither using the kernel patches described in the link above[assuming they are the correct ones for me])
2- i get tons of "resume error" if i try to poweroff the notebook after a recover from suspend mode.
(basically, i put the chromebook in suspend mode for a while, next i recover it and i can do my work, finally, if i try to poweroff, it gives me that error)3- (i don't know if it's a problem) during the boot i get this error
usb 2-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409
Hoping for aid!! XD
In my case, as I am not very expert, I prefer to use kernel which comes with Arch installation.
And with any patches I can do.
Amazing !
Offline
#15 2014-07-12 17:06:10
- scot14
- Member
- Registered: 2014-06-02
- Posts: 123
Re: Toshiba Chromebook
mshan wrote:
In my case, as I am not very expert, I prefer to use kernel which comes with Arch installation. And with any patches I can do.
I ran a custom-patched version of Arch on the Toshiba without any problems. You can probably use a kernel designed for another one of the Celeron 2955U Chromebooks, but I haven't tried any of them. I think this is one:
https://aur.archlinux.org/packages/?O=0&K=c720
(More information in https://bbs.archlinux.org/viewtopic.php?id=173418)
Offline
#16 2014-09-12 18:44:58
- wangsu
- Member
- Registered: 2014-09-12
- Posts: 1
Re: Toshiba Chromebook
I upgraded to latest kernel 3.17 rc4 and touchpad working well.
But this message "usb 2-4: string descriptor 0 malformed (err = -61), defaulting to 0x0409" still there during the boot...
for toshiba cb35...
Offline
#17 2014-09-12 18:56:46
- scot14
- Member
- Registered: 2014-06-02
- Posts: 123
Re: Toshiba Chromebook
You can find out which device is 2-4 with the command "lsusb". What does it say?
Last edited by scot14 (2014-09-12 18:57:06)
Offline
Pages: 1