The AMD/ATI Bar & Grill

doblerone · 2014-10-08 19:38:45

So I can remove it? I mean, the catalyst package.

ChemBro · 2014-10-09 17:03:50

doblerone wrote:

So I can remove it? I mean, the catalyst package.

Unless you switch to the open source driver, no.

doblerone · 2014-10-09 17:46:50

Then I will wait for a reply from the maintainer.

vipo · 2014-10-09 18:27:49

Hi,

I have a HP DV6 laptop with switchable graphics. I am assuming Xorg 1.16 is not compatible yet with the -pxp packages?

I installed catalyst from the unofficial repo and when i startx, i get the following error message in Xorg.0.log

 
[    37.000] 
X.Org X Server 1.16.1
Release Date: 2014-09-21
[    37.000] X Protocol Version 11, Revision 0
[    37.000] Build Operating System: Linux 3.16.1-1-ARCH x86_64 
[    37.000] Current Operating System: Linux burebista 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[    37.000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a9d03035-b5eb-4def-b155-fabac8c9bcc4 rw quiet
[    37.000] Build Date: 21 September 2014  10:53:13AM
[    37.000]  
[    37.001] Current version of pixman: 0.32.6
[    37.001] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    37.001] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    37.001] (==) Log file: "/home/vic/.local/share/xorg/Xorg.0.log", Time: Thu Oct  9 14:13:40 2014
[    37.037] (==) Using config file: "/etc/X11/xorg.conf"
[    37.037] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    37.037] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    37.095] (==) ServerLayout "aticonfig Layout"
[    37.095] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    37.095] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    37.112] (**) |   |-->Device "aticonfig-Device[0]-0"
[    37.112] (==) Automatically adding devices
[    37.112] (==) Automatically enabling devices
[    37.112] (==) Automatically adding GPU devices
[    37.158] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    37.158] 	Entry deleted from font path.
[    37.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    37.169] 	Entry deleted from font path.
[    37.169] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    37.169] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    37.169] 	Entry deleted from font path.
[    37.169] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    37.169] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    37.169] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    37.169] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    37.169] (II) Loader magic: 0x818d80
[    37.169] (II) Module ABI versions:
[    37.169] 	X.Org ANSI C Emulation: 0.4
[    37.169] 	X.Org Video Driver: 18.0
[    37.169] 	X.Org XInput driver : 21.0
[    37.169] 	X.Org Server Extension : 8.0
[    37.174] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[    37.175] (II) xfree86: Adding drm device (/dev/dri/card0)
[    37.176] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[    37.179] (--) PCI:*(0:0:2:0) 8086:0116:103c:185e rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64
[    37.179] (--) PCI: (0:1:0:0) 1002:6740:103c:185e rev 0, Mem @ 0xa0000000/268435456, 0xc6500000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[    37.179] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    37.179] (II) "glx" will be loaded by default.
[    37.179] (II) LoadModule: "glx"
[    37.210] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[    37.226] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    37.227] 	compiled for 6.9.0, module version = 1.0.0
[    37.227] (II) LoadModule: "fglrx"
[    37.260] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    37.472] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    37.472] 	compiled for 1.4.99.906, module version = 14.20.7
[    37.472] 	Module class: X.Org Video Driver
[    37.474] (II) Loading sub module "fglrxdrm"
[    37.474] (II) LoadModule: "fglrxdrm"
[    37.474] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    37.500] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    37.500] 	compiled for 1.4.99.906, module version = 14.20.7
[    37.500] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[    37.500] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002         
[    37.500] (II) AMD Proprietary Linux Driver Build Date: Sep  2 2014 10:14:55
[    37.500] (++) using VT number 2

[    37.500] (--) controlling tty is VT number 2, auto-enabling KeepTty
[    37.500] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    37.500] (WW) Falling back to old probe method for fglrx
[    37.581] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    37.593] (WW) LoadKernelModule: Setting of real/effective user Id to 0/0 failed[    37.596] ukiDynamicMajor: found major device number 250
[    37.596] ukiDynamicMajor: found major device number 250
[    37.596] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    37.596] ukiOpenDevice: node name is /dev/ati/card0
[    37.619] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.619] ukiOpenDevice: node name is /dev/ati/card1
[    37.621] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.621] ukiOpenDevice: node name is /dev/ati/card2
[    37.623] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.623] ukiOpenDevice: node name is /dev/ati/card3
[    37.625] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.625] ukiOpenDevice: node name is /dev/ati/card4
[    37.627] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.627] ukiOpenDevice: node name is /dev/ati/card5
[    37.629] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.629] ukiOpenDevice: node name is /dev/ati/card6
[    37.630] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.630] ukiOpenDevice: node name is /dev/ati/card7
[    37.632] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.632] ukiOpenDevice: node name is /dev/ati/card8
[    37.634] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.634] ukiOpenDevice: node name is /dev/ati/card9
[    37.635] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.635] ukiOpenDevice: node name is /dev/ati/card10
[    37.637] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.637] ukiOpenDevice: node name is /dev/ati/card11
[    37.638] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.638] ukiOpenDevice: node name is /dev/ati/card12
[    37.640] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.640] ukiOpenDevice: node name is /dev/ati/card13
[    37.641] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.641] ukiOpenDevice: node name is /dev/ati/card14
[    37.643] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.643] ukiOpenDevice: node name is /dev/ati/card15
[    37.644] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.647] (--) Chipset Supported AMD Graphics Processor (0x6740) found
[    37.648] (II) fglrx(0): pEnt->device->identifier=0x1ad23f0
[    37.648] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    37.648] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[    37.662] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    37.663] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    37.663] (==) fglrx(0): Default visual is TrueColor
[    37.663] (**) fglrx(0): Option "DPMS" "true"
[    37.663] (==) fglrx(0): RGB weight 888
[    37.663] (II) fglrx(0): Using 8 bits per RGB 
[    37.663] (==) fglrx(0): Buffer Tiling is ON
[    37.664] (II) Loading sub module "fglrxdrm"
[    37.664] (II) LoadModule: "fglrxdrm"
[    37.664] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    37.664] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    37.664] 	compiled for 1.4.99.906, module version = 14.20.7
[    37.665] (WW) LoadKernelModule: Setting of real/effective user Id to 0/0 failed[    37.667] ukiDynamicMajor: found major device number 250
[    37.668] ukiDynamicMajor: found major device number 250
[    37.668] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    37.668] ukiOpenDevice: node name is /dev/ati/card0
[    37.670] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.670] ukiOpenDevice: node name is /dev/ati/card1
[    37.671] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.672] ukiOpenDevice: node name is /dev/ati/card2
[    37.673] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.673] ukiOpenDevice: node name is /dev/ati/card3
[    37.675] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.675] ukiOpenDevice: node name is /dev/ati/card4
[    37.677] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.677] ukiOpenDevice: node name is /dev/ati/card5
[    37.679] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.679] ukiOpenDevice: node name is /dev/ati/card6
[    37.681] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.681] ukiOpenDevice: node name is /dev/ati/card7
[    37.683] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.683] ukiOpenDevice: node name is /dev/ati/card8
[    37.684] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.684] ukiOpenDevice: node name is /dev/ati/card9
[    37.686] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.686] ukiOpenDevice: node name is /dev/ati/card10
[    37.687] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.688] ukiOpenDevice: node name is /dev/ati/card11
[    37.689] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.689] ukiOpenDevice: node name is /dev/ati/card12
[    37.691] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.691] ukiOpenDevice: node name is /dev/ati/card13
[    37.692] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.692] ukiOpenDevice: node name is /dev/ati/card14
[    37.694] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.694] ukiOpenDevice: node name is /dev/ati/card15
[    37.695] ukiOpenByBusid: ukiOpenMinor returns -1003
[    37.696] (**) fglrx(0): NoAccel = NO
[    37.696] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    37.696] (--) fglrx(0): Chipset: "AMD Radeon HD 6700M Series" (Chipset = 0x6740)
[    37.696] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x185e)
[    37.696] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    37.696] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[    37.696] (--) fglrx(0): MMIO registers at 0xc6500000
[    37.696] (--) fglrx(0): I/O port at 0x00005000
[    37.696] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    37.696] (EE) fglrx(0): failed to map MMIO register space!(EE) fglrx(0): MapMMIO failed
[    37.696] (EE) fglrx(0): PreInitAdapter failed
[    37.696] (EE) fglrx(0): PreInit failed
[    37.696] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === end
[    37.696] (II) UnloadModule: "fglrx"
[    37.696] (II) UnloadSubModule: "fglrxdrm"
[    37.696] (II) Unloading fglrxdrm
[    37.696] (II) UnloadSubModule: "fglrxdrm"
[    37.696] (EE) Screen(s) found, but none have a usable configuration.
[    37.696] (EE) 
Fatal server error:
[    37.696] (EE) no screens found(EE) 
[    37.696] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    37.696] (EE) Please also check the log file at "/home/vic/.local/share/xorg/Xorg.0.log" for additional information.
[    37.696] (EE) 
[    37.709] (EE) Server terminated with error (1). Closing log file.

uname -r shows

3.16.4-1-ARCH

X -version shows:

X.Org X Server 1.16.1
Release Date: 2014-09-21
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.16.1-1-ARCH x86_64 
Current Operating System: Linux burebista 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=a9d03035-b5eb-4def-b155-fabac8c9bcc4 rw quiet
Build Date: 21 September 2014  10:53:13AM
 
Current version of pixman: 0.32.6
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.

How can i fix this issue?

Last edited by vipo (2014-10-09 18:29:45)

Vi0L0 · 2014-10-09 18:39:59

doblerone wrote:

Then I will wait for a reply from the maintainer.

I'm pretty sure that you didn't update catalyst-total-hd234k to version 13.1-28, because there I fixed conflict with ati-dri.

@vipo:
is this some kind of pxp notebook?
AMD often had problems with mobile gpus... Have you tried catalyst 14.9 + [xorg115] repo?

vipo · 2014-10-09 18:42:55

Vi0L0 wrote:

doblerone wrote:
Then I will wait for a reply from the maintainer.
I'm pretty sure that you didn't update catalyst-total-hd234k to version 13.1-28, because there I fixed conflict with ati-dri.
@vipo:
is this some kind of pxp notebook?
AMD often had problems with mobile gpus... Have you tried catalyst 14.9 + [xorg115] repo?

Yup it s a laptop with integrated intel 3000 + amd 7690m xt graphics.

I know it worked fine with Xorg 1.15 so i am downgrading now and re-installing the catalyst drivers (i removed them). I will report back.

rocker2344 · 2014-10-09 18:45:49

I have been running a dell E6440 for about a year now. and it has

VGA compatible controller: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller
Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Sun XT [Radeon HD 8670A/8670M/8690M] (rev ff)

I have gotten it to work with the xf86-video-intel/xf86-video-ati
I can not get it to work with the catalyst-pxp (repo nor aur)

I get the "No supported adapters detected issue".
I tried to edit the xorg.conf to no avail (amdccle does not see the card)

Funny thing is that this computer can come with ubuntu pre-loaded from dell.

i don't have anything added to grub's default boot file "/etc/default/grub"
and in "mkinitcpio.conf" i have these settings

(...)
MODULES="crc32c-intel radeon i915 atkbd"
(...)

doblerone · 2014-10-09 19:25:01

Vi0L0 wrote:

doblerone wrote:
Then I will wait for a reply from the maintainer.
I'm pretty sure that you didn't update catalyst-total-hd234k to version 13.1-28, because there I fixed conflict with ati-dri.

You're absolutely right. I updated the package to 13.1-28 and after everything worked!

rocker2344 · 2014-10-09 19:33:44

Ok so i am closer. i removed the modules in the mkinitcipo.conf.only problem now is that i can not change my screens. amdccle dose not display the Display Options. when i start it i get some errors from the command line

libpng warning: iCCP: known incorrect sRGB profile
libGL error: No matching fbConfigs or visuals found
libGL error: failed to load driver: i965
libGL error: No matching fbConfigs or visuals found
libGL error: failed to load driver: swrast

Vi0L0 · 2014-10-09 20:29:07

install also xf86-video-intel (2.99.910-1 version, you can find it in [xorg115] repo) and intel-dri, maybe it will help

Last edited by Vi0L0 (2014-10-09 20:29:23)

causa-prima · 2014-10-09 22:55:15

I finally was able to produce a screenshot of some artifacts. The artifacts I sporadically saw looked completely different, but anyways, this is proof

Nowadays I don't see as many artifacts as some weeks ago, but this proofs they are still there. Any ideas what might be wrong with my configuration? I do have the following packages installed:
catalyst/catalyst-hook 14.9-11
catalyst/catalyst-libgl 14.9-10
catalyst/catalyst-utils 14.9-10
catalyst/lib32-catalyst-libgl 14.9-10
catalyst/lib32-catalyst-utils 14.9-10
catalyst/lib32-opencl-catalyst 14.9-10
catalyst/opencl-catalyst 14.9-10

Things I configured:
- amdccle -> Tear Free Enabled, V-Sync always off
- DigitalHDTVDefaultUnderscan=V0 and TVEnableOverscan=V0 added to /etc/ati/amdpcsdb*

conduit · 2014-10-10 07:21:31

Not sure if this should belong here or on in the Multimedia and Games section. Long time lurker, just registered

I have laptop with Intel HD graphics and AMD/ATI 6770m graphics card. I am trying to run a 27inch 1440p monitor via HDMI (only have HDMI/VGA port available on the laptop).

I managed to run 2560x1440@45Hz using the intel driver by using xrandr and setting the custom mode. I then tried to use the catalyst driver, hoping i could hit 60Hz, but i cannot even set the mode with xrandr.

I add the mode in xrandr, i set it and when i do a 'xrandr' it has the * next to it but its not set.

Below is my xorg.conf:

Section "ServerLayout"
	Identifier     "aticonfig Layout"
	Screen      0  "aticonfig-Screen[0]-0" 0 0
EndSection

Section "Module"
EndSection

Section "Monitor"
	Identifier   "aticonfig-Monitor[0]-0"
	Option	    "VendorName" "ATI Proprietary Driver"
	Option	    "ModelName" "Generic Autodetecting Monitor"
	Option	    "DPMS" "true"
	DisplaySize	597	338
	HorizSync	28.0 - 150.0
	VertRefresh	43.0 - 130.0	
	ModeLine    "2560x1440" 240 2560 2696 2968 3376 1440 1441 1444 1469 -hsync +vsync
EndSection

Section "Device"
	Identifier  "aticonfig-Device[0]-0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
	Option      "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, AllowNonEdidModes, NoEdidMaxPClkCheck"
	Option "UseEDID" "FALSE"
EndSection

Section "Screen"
	Identifier "aticonfig-Screen[0]-0"
	Device     "aticonfig-Device[0]-0"
	Monitor    "aticonfig-Monitor[0]-0"
#	Option "ExactModeTimingsDVI" "True"
# 	Option          "HDMI1: 2560x1440 +0+0"
	Option "UseEDID" "FALSE"
	DefaultDepth     24
	SubSection "Display"
		Viewport   0 0
		Depth     24
		Modes	"2560x1440"
	EndSubSection
EndSection

Xorg.0.log:

[  5094.419] 
X.Org X Server 1.15.2
Release Date: 2014-06-27
[  5094.424] X Protocol Version 11, Revision 0
[  5094.426] Build Operating System: Linux 3.15.1-1-ARCH x86_64 
[  5094.428] Current Operating System: Linux burebista 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64
[  5094.428] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fd90bcdd-0c8c-45ba-a3b7-2ed14b77ac83 rw quiet
[  5094.432] Build Date: 27 June 2014  07:32:26PM
[  5094.434]  
[  5094.436] Current version of pixman: 0.32.6
[  5094.439] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  5094.439] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  5094.447] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 10 02:55:35 2014
[  5094.449] (==) Using config file: "/etc/X11/xorg.conf"
[  5094.451] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  5094.453] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  5094.453] (==) ServerLayout "aticonfig Layout"
[  5094.453] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[  5094.453] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[  5094.453] (**) |   |-->Device "aticonfig-Device[0]-0"
[  5094.453] (==) Automatically adding devices
[  5094.453] (==) Automatically enabling devices
[  5094.453] (==) Automatically adding GPU devices
[  5094.453] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  5094.453] 	Entry deleted from font path.
[  5094.453] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  5094.453] 	Entry deleted from font path.
[  5094.453] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  5094.453] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  5094.453] 	Entry deleted from font path.
[  5094.453] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  5094.453] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[  5094.453] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[  5094.453] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  5094.453] (II) Loader magic: 0x811cc0
[  5094.453] (II) Module ABI versions:
[  5094.453] 	X.Org ANSI C Emulation: 0.4
[  5094.453] 	X.Org Video Driver: 15.0
[  5094.453] 	X.Org XInput driver : 20.0
[  5094.453] 	X.Org Server Extension : 8.0
[  5094.454] (II) xfree86: Adding drm device (/dev/dri/card0)
[  5094.456] (--) PCI:*(0:0:2:0) 8086:0116:103c:185e rev 9, Mem @ 0xc0000000/4194304, 0xb0000000/268435456, I/O @ 0x00006000/64
[  5094.456] (--) PCI: (0:1:0:0) 1002:6740:103c:185e rev 0, Mem @ 0xa0000000/268435456, 0xc6500000/131072, I/O @ 0x00005000/256, BIOS @ 0x????????/131072
[  5094.456] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  5094.458] Initializing built-in extension Generic Event Extension
[  5094.459] Initializing built-in extension SHAPE
[  5094.461] Initializing built-in extension MIT-SHM
[  5094.463] Initializing built-in extension XInputExtension
[  5094.464] Initializing built-in extension XTEST
[  5094.466] Initializing built-in extension BIG-REQUESTS
[  5094.467] Initializing built-in extension SYNC
[  5094.469] Initializing built-in extension XKEYBOARD
[  5094.470] Initializing built-in extension XC-MISC
[  5094.472] Initializing built-in extension SECURITY
[  5094.473] Initializing built-in extension XINERAMA
[  5094.475] Initializing built-in extension XFIXES
[  5094.476] Initializing built-in extension RENDER
[  5094.477] Initializing built-in extension RANDR
[  5094.478] Initializing built-in extension COMPOSITE
[  5094.480] Initializing built-in extension DAMAGE
[  5094.481] Initializing built-in extension MIT-SCREEN-SAVER
[  5094.482] Initializing built-in extension DOUBLE-BUFFER
[  5094.483] Initializing built-in extension RECORD
[  5094.485] Initializing built-in extension DPMS
[  5094.486] Initializing built-in extension Present
[  5094.487] Initializing built-in extension DRI3
[  5094.488] Initializing built-in extension X-Resource
[  5094.489] Initializing built-in extension XVideo
[  5094.491] Initializing built-in extension XVideo-MotionCompensation
[  5094.492] Initializing built-in extension XFree86-VidModeExtension
[  5094.493] Initializing built-in extension XFree86-DGA
[  5094.494] Initializing built-in extension XFree86-DRI
[  5094.495] Initializing built-in extension DRI2
[  5094.495] (II) "glx" will be loaded by default.
[  5094.495] (II) LoadModule: "glx"
[  5094.495] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[  5094.496] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[  5094.496] 	compiled for 6.9.0, module version = 1.0.0
[  5094.497] Loading extension GLX
[  5094.497] (II) LoadModule: "fglrx"
[  5094.497] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[  5094.515] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[  5094.515] 	compiled for 1.4.99.906, module version = 14.20.7
[  5094.515] 	Module class: X.Org Video Driver
[  5094.516] (II) Loading sub module "fglrxdrm"
[  5094.516] (II) LoadModule: "fglrxdrm"
[  5094.516] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  5094.516] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  5094.516] 	compiled for 1.4.99.906, module version = 14.20.7
[  5094.516] (II) AMD Proprietary Linux Driver Version Identifier:14.20.7
[  5094.516] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-14.201.1006.1002         
[  5094.516] (II) AMD Proprietary Linux Driver Build Date: Sep  2 2014 10:14:55
[  5094.516] (++) using VT number 1

[  5094.516] (WW) Falling back to old probe method for fglrx
[  5094.521] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[  5094.523] ukiDynamicMajor: found major device number 250
[  5094.523] ukiDynamicMajor: found major device number 250
[  5094.523] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  5094.523] ukiOpenDevice: node name is /dev/ati/card0
[  5094.523] ukiOpenDevice: open result is 9, (OK)
[  5094.523] ukiOpenByBusid: ukiOpenMinor returns 9
[  5094.523] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  5094.524] (--) Chipset Supported AMD Graphics Processor (0x6740) found
[  5094.524] (II) fglrx: intel VGA device detected, load intel driver.
[  5094.524] (II) LoadModule: "intel"
[  5094.524] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  5094.525] (II) Module intel: vendor="X.Org Foundation"
[  5094.525] 	compiled for 1.15.0, module version = 2.99.910
[  5094.525] 	Module class: X.Org Video Driver
[  5094.525] 	ABI class: X.Org Video Driver, version 15.0
[  5094.526] (II) fglrx(0): pEnt->device->identifier=0xde1430
[  5094.526] (II) intel(1): pEnt->device->identifier=(nil)
[  5094.526] (EE) Screen 1 deleted because of no matching config section.
[  5094.526] (II) UnloadModule: "intel"
[  5094.526] (II) fglrx(0): === [xdl_xs115_atiddxPreInit] === begin
[  5094.526] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[  5094.953] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibGL:
Switch to AMD

[  5094.968] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[  5094.968] (==) fglrx(0): RGB weight 888
[  5094.968] (==) fglrx(0): Default visual is TrueColor
[  5094.968] (**) fglrx(0): Option "Tiling" "off"
[  5094.968] (**) fglrx(0): Option "LinearFramebuffer" "on"
[  5094.968] (**) fglrx(0): ChipID override: 0x0116
[  5094.968] (**) fglrx(0): Integrated Graphics Chipset: Intel(R) HD Graphics 3000
[  5094.968] (**) fglrx(0): Relaxed fencing enabled
[  5094.968] (**) fglrx(0): Wait on SwapBuffers? enabled
[  5094.968] (**) fglrx(0): Triple buffering? enabled
[  5094.968] (**) fglrx(0): Framebuffer linear
[  5094.968] (**) fglrx(0): Pixmaps linear
[  5094.968] (**) fglrx(0): 3D buffers tiled
[  5094.968] (**) fglrx(0): SwapBuffers wait enabled
[  5094.968] (==) fglrx(0): video overlay key set to 0x101fe
[  5094.968] (II) fglrx(0): Output LVDS1 using monitor section aticonfig-Monitor[0]-0
[  5094.969] (--) fglrx(0): found backlight control interface /sys/class/backlight/intel_backlight
[  5094.970] (II) fglrx(0): Output VGA1 has no monitor section
[  5095.021] (II) fglrx(0): Output HDMI1 has no monitor section
[  5095.062] (II) fglrx(0): Output DP1 has no monitor section
[  5095.062] (II) fglrx(0): EDID for output LVDS1
[  5095.062] (II) fglrx(0): Manufacturer: LGD  Model: 259  Serial#: 0
[  5095.062] (II) fglrx(0): Year: 2009  Week: 0
[  5095.062] (II) fglrx(0): EDID Version: 1.3
[  5095.062] (II) fglrx(0): Digital Display Input
[  5095.062] (II) fglrx(0): Max Image Size [cm]: horiz.: 35  vert.: 19
[  5095.063] (II) fglrx(0): Gamma: 2.20
[  5095.063] (II) fglrx(0): No DPMS capabilities specified
[  5095.063] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  5095.063] (II) fglrx(0): First detailed timing is preferred mode
[  5095.063] (II) fglrx(0): redX: 0.617 redY: 0.349   greenX: 0.313 greenY: 0.595
[  5095.063] (II) fglrx(0): blueX: 0.151 blueY: 0.056   whiteX: 0.313 whiteY: 0.329
[  5095.063] (II) fglrx(0): Manufacturer's mask: 0
[  5095.063] (II) fglrx(0): Supported detailed timing:
[  5095.063] (II) fglrx(0): clock: 138.5 MHz   Image Size:  345 x 194 mm
[  5095.063] (II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[  5095.063] (II) fglrx(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[  5095.063] (II) fglrx(0):  LG Display
[  5095.063] (II) fglrx(0):  LP156WF1-TLF3
[  5095.063] (II) fglrx(0): EDID (in hex):
[  5095.063] (II) fglrx(0): 	00ffffffffffff0030e4590200000000
[  5095.063] (II) fglrx(0): 	00130103802313780a15d59e59509826
[  5095.063] (II) fglrx(0): 	0e505400000001010101010101010101
[  5095.063] (II) fglrx(0): 	0101010101011a3680a070381f403020
[  5095.063] (II) fglrx(0): 	350059c2100000190000000000000000
[  5095.063] (II) fglrx(0): 	00000000000000000000000000fe004c
[  5095.063] (II) fglrx(0): 	4720446973706c61790a2020000000fe
[  5095.063] (II) fglrx(0): 	004c503135365746312d544c4633003c
[  5095.063] (II) fglrx(0): Not using mode "2560x1440" (exceeds panel dimensions)
[  5095.063] (II) fglrx(0): Not using default mode "320x240" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "400x300" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "512x384" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "640x480" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "640x512" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "800x600" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "896x672" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "928x696" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "960x720" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "700x525" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Not using default mode "1024x768" (doublescan mode not supported)
[  5095.063] (II) fglrx(0): Printing probed modes for output LVDS1
[  5095.063] (II) fglrx(0): Modeline "1920x1080"x59.9  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[  5095.063] (II) fglrx(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[  5095.063] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[  5095.063] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[  5095.063] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[  5095.063] (II) fglrx(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[  5095.063] (II) fglrx(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[  5095.063] (II) fglrx(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[  5095.064] (II) fglrx(0): EDID for output VGA1
[  5095.114] (II) fglrx(0): EDID for output HDMI1
[  5095.115] (II) fglrx(0): Manufacturer: DPL  Model: 0  Serial#: 0
[  5095.115] (II) fglrx(0): Year: 2014  Week: 20
[  5095.115] (II) fglrx(0): EDID Version: 1.3
[  5095.115] (II) fglrx(0): Digital Display Input
[  5095.115] (II) fglrx(0): Max Image Size [cm]: horiz.: 59  vert.: 33
[  5095.115] (II) fglrx(0): Gamma: 2.20
[  5095.115] (II) fglrx(0): DPMS capabilities: Off
[  5095.115] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  5095.115] (II) fglrx(0): First detailed timing not preferred mode in violation of standard!
[  5095.115] (II) fglrx(0): redX: 0.642 redY: 0.334   greenX: 0.334 greenY: 0.624
[  5095.115] (II) fglrx(0): blueX: 0.152 blueY: 0.050   whiteX: 0.313 whiteY: 0.329
[  5095.115] (II) fglrx(0): Supported established timings:
[  5095.115] (II) fglrx(0): 720x400@70Hz
[  5095.115] (II) fglrx(0): 640x480@60Hz
[  5095.115] (II) fglrx(0): 640x480@75Hz
[  5095.115] (II) fglrx(0): 800x600@60Hz
[  5095.115] (II) fglrx(0): 800x600@75Hz
[  5095.115] (II) fglrx(0): 1024x768@60Hz
[  5095.115] (II) fglrx(0): 1024x768@75Hz
[  5095.115] (II) fglrx(0): 1280x1024@75Hz
[  5095.115] (II) fglrx(0): 1152x864@75Hz
[  5095.115] (II) fglrx(0): Manufacturer's mask: 0
[  5095.115] (II) fglrx(0): Supported standard timings:
[  5095.115] (II) fglrx(0): #0: hsize: 1440  vsize 900  refresh: 60  vid: 149
[  5095.115] (II) fglrx(0): #3: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  5095.115] (II) fglrx(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[  5095.115] (II) fglrx(0): #6: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[  5095.115] (II) fglrx(0): Supported detailed timing:
[  5095.115] (II) fglrx(0): clock: 245.0 MHz   Image Size:  596 x 335 mm
[  5095.115] (II) fglrx(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[  5095.115] (II) fglrx(0): v_active: 1440  v_sync: 1442  v_sync_end 1447 v_blanking: 1501 v_border: 0
[  5095.115] (II) fglrx(0): Supported detailed timing:
[  5095.115] (II) fglrx(0): clock: 154.0 MHz   Image Size:  597 x 304 mm
[  5095.115] (II) fglrx(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[  5095.115] (II) fglrx(0): v_active: 1200  v_sync: 1202  v_sync_end 1208 v_blanking: 1235 v_border: 0
[  5095.115] (II) fglrx(0): Ranges: V min: 50 V max: 75 Hz, H min: 30 H max: 95 kHz, PixClock max 275 MHz
[  5095.115] (II) fglrx(0): Monitor name: HDMI
[  5095.115] (II) fglrx(0): Supported detailed timing:
[  5095.115] (II) fglrx(0): clock: 148.5 MHz   Image Size:  521 x 293 mm
[  5095.115] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  5095.115] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  5095.115] (II) fglrx(0): Supported detailed timing:
[  5095.116] (II) fglrx(0): clock: 85.8 MHz   Image Size:  0 x 0 mm
[  5095.116] (II) fglrx(0): h_active: 1366  h_sync: 1436  h_sync_end 1579 h_blank_end 1792 h_border: 0
[  5095.116] (II) fglrx(0): v_active: 768  v_sync: 771  v_sync_end 774 v_blanking: 798 v_border: 0
[  5095.116] (II) fglrx(0): Supported detailed timing:
[  5095.116] (II) fglrx(0): clock: 74.2 MHz   Image Size:  521 x 293 mm
[  5095.116] (II) fglrx(0): h_active: 1280  h_sync: 1390  h_sync_end 1430 h_blank_end 1650 h_border: 0
[  5095.116] (II) fglrx(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[  5095.116] (II) fglrx(0): Supported detailed timing:
[  5095.116] (II) fglrx(0): clock: 148.5 MHz   Image Size:  521 x 293 mm
[  5095.116] (II) fglrx(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[  5095.116] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  5095.116] (II) fglrx(0): Number of EDID sections to follow: 1
[  5095.116] (II) fglrx(0): EDID (in hex):
[  5095.116] (II) fglrx(0): 	00ffffffffffff00120c000000000000
[  5095.116] (II) fglrx(0): 	14180103803b2178286b35a455559f27
[  5095.116] (II) fglrx(0): 	0c5054a54b8095000101010181800101
[  5095.116] (II) fglrx(0): 	b300a9400101b45f00a0a0a03d503020
[  5095.116] (II) fglrx(0): 	2500544f2100001a283c80a070b02340
[  5095.116] (II) fglrx(0): 	3020260055302100001a000000fd0032
[  5095.116] (II) fglrx(0): 	4b1e5f1b000a202020202020000000fc
[  5095.116] (II) fglrx(0): 	0048444d490a20202020202020200119
[  5095.116] (II) fglrx(0): 	020328f14f900504030207061f141312
[  5095.116] (II) fglrx(0): 	1116150123090707830100006b030c00
[  5095.116] (II) fglrx(0): 	1000113600002001023a801871382d40
[  5095.116] (II) fglrx(0): 	582c450009252100001e842156aa5100
[  5095.116] (II) fglrx(0): 	1e30468f3300000000000018011d0072
[  5095.116] (II) fglrx(0): 	51d01e206e28550009252100001e023a
[  5095.116] (II) fglrx(0): 	80d072382d40102c458009252100001e
[  5095.116] (II) fglrx(0): 	000000000000000000000000000000c7
[  5095.116] (II) fglrx(0): Printing probed modes for output HDMI1
[  5095.116] (II) fglrx(0): Modeline "1920x1200"x60.0  154.00  1920 1968 2000 2080  1200 1202 1208 1235 +hsync -vsync (74.0 kHz e)
[  5095.116] (II) fglrx(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[  5095.116] (II) fglrx(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  5095.116] (II) fglrx(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1920x1080i"x60.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1920x1080i"x50.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1920x1080i"x59.9   74.18  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1680x1050"x59.9  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1440x900"x59.9   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1366x768"x60.0   85.80  1366 1436 1579 1792  768 771 774 798 -hsync -vsync (47.9 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1440x576i"x50.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1024x768"x75.1   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1440x480i"x60.0   27.03  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
[  5095.117] (II) fglrx(0): Modeline "1440x480i"x59.9   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[  5095.117] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  5095.117] (II) fglrx(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  5095.117] (II) fglrx(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[  5095.117] (II) fglrx(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  5095.117] (II) fglrx(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  5095.117] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  5095.117] (II) fglrx(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  5095.117] (II) fglrx(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  5095.117] (II) fglrx(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  5095.159] (II) fglrx(0): EDID for output DP1
[  5095.159] (II) fglrx(0): Output LVDS1 connected
[  5095.159] (II) fglrx(0): Output VGA1 disconnected
[  5095.159] (II) fglrx(0): Output HDMI1 connected
[  5095.159] (II) fglrx(0): Output DP1 disconnected
[  5095.159] (II) fglrx(0): Using exact sizes for initial modes
[  5095.159] (II) fglrx(0): Output LVDS1 using initial mode 1920x1080
[  5095.159] (II) fglrx(0): Output HDMI1 using initial mode 1920x1080i
[  5095.159] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[  5095.159] (II) fglrx(0): Kernel page flipping support detected, enabling
[  5095.159] (**) fglrx(0): Display dimensions: (597, 338) mm
[  5095.159] (**) fglrx(0): DPI set to (81, 81)
[  5095.159] (II) Loading sub module "fb"
[  5095.159] (II) LoadModule: "fb"
[  5095.160] (II) Loading /usr/lib/xorg/modules/libfb.so
[  5095.160] (II) Module fb: vendor="X.Org Foundation"
[  5095.160] 	compiled for 1.15.2, module version = 1.0.0
[  5095.160] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  5095.160] (II) Loading sub module "dri2"
[  5095.160] (II) LoadModule: "dri2"
[  5095.160] (II) Module "dri2" already built-in
[  5095.160] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[  5095.160] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  5095.160] (==) fglrx(0): Default visual is TrueColor
[  5095.160] (**) fglrx(0): Option "DPMS" "true"
[  5095.160] (==) fglrx(0): RGB weight 888
[  5095.160] (II) fglrx(0): Using 8 bits per RGB 
[  5095.160] (==) fglrx(0): Buffer Tiling is ON
[  5095.160] (II) Loading sub module "fglrxdrm"
[  5095.160] (II) LoadModule: "fglrxdrm"
[  5095.161] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  5095.161] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  5095.161] 	compiled for 1.4.99.906, module version = 14.20.7
[  5095.163] ukiDynamicMajor: found major device number 250
[  5095.163] ukiDynamicMajor: found major device number 250
[  5095.163] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  5095.163] ukiOpenDevice: node name is /dev/ati/card0
[  5095.163] ukiOpenDevice: open result is 12, (OK)
[  5095.163] ukiOpenByBusid: ukiOpenMinor returns 12
[  5095.163] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  5095.164] (**) fglrx(0): NoAccel = NO
[  5095.164] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[  5095.164] (--) fglrx(0): Chipset: "AMD Radeon HD 6700M Series" (Chipset = 0x6740)
[  5095.164] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x185e)
[  5095.164] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[  5095.164] (--) fglrx(0): Linear framebuffer (phys) at 0xa0000000
[  5095.164] (--) fglrx(0): MMIO registers at 0xc6500000
[  5095.164] (--) fglrx(0): I/O port at 0x00005000
[  5095.164] (==) fglrx(0): ROM-BIOS at 0x000c0000
[  5095.165] (II) fglrx(0): AC Adapter is used
[  5095.165] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[  5095.165] (--) fglrx(0): Video RAM: 2097152 kByte, Type: GDDR5
[  5095.165] (II) fglrx(0): PCIE card detected
[  5095.165] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[  5095.165] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[  5095.190] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x80000000)
[  5095.190] (II) fglrx(0): RandR 1.2 support is enabled!
[  5095.190] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[  5095.190] (II) Loading sub module "fb"
[  5095.190] (II) LoadModule: "fb"
[  5095.191] (II) Loading /usr/lib/xorg/modules/libfb.so
[  5095.191] (II) Module fb: vendor="X.Org Foundation"
[  5095.191] 	compiled for 1.15.2, module version = 1.0.0
[  5095.191] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  5095.191] (II) fglrx(0): EDID Management option: EDID Management is enabled
[  5095.191] (II) Loading sub module "ddc"
[  5095.191] (II) LoadModule: "ddc"
[  5095.191] (II) Module "ddc" already built-in
[  5095.202] (II) fglrx(0): Eyefinity capable adapter detected.
[  5095.202] (II) fglrx(0): Adapter AMD Radeon HD 6700M Series has 6 configurable heads and 0 displays connected.
[  5095.202] (==) fglrx(0):  PseudoColor visuals disabled
[  5095.202] (II) Loading sub module "ramdac"
[  5095.202] (II) LoadModule: "ramdac"
[  5095.202] (II) Module "ramdac" already built-in
[  5095.202] (==) fglrx(0): NoDRI = NO
[  5095.202] (==) fglrx(0): Capabilities: 0x00000000
[  5095.202] (==) fglrx(0): CapabilitiesEx: 0x00000000
[  5095.202] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[  5095.202] (==) fglrx(0): UseFastTLS=0
[  5095.202] (II) fglrx(0): TearFreeDesktop is not supported on PowerXpress systems currently.
[  5095.202] (--) Depth 24 pixmap format is 32 bpp
[  5095.202] (II) LoadModule: "glesx"
[  5095.203] (II) Loading /usr/lib/xorg/modules/glesx.so
[  5095.203] (II) Module glesx: vendor="X.Org Foundation"
[  5095.203] 	compiled for 1.4.99.906, module version = 1.0.0
[  5095.203] Loading extension GLESX
[  5095.203] (II) fglrx(0): [DRI2] Setup complete
[  5095.203] (II) fglrx(0): [DRI2]   DRI driver: i965
[  5095.203] (II) fglrx(0): [DRI2]   VDPAU driver: i965
[  5095.203] (II) fglrx(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
[  5095.205] (II) UXA(0): Driver registered support for the following operations:
[  5095.205] (II)         solid
[  5095.205] (II)         copy
[  5095.205] (II)         composite (RENDER acceleration)
[  5095.205] (II)         put_image
[  5095.205] (II)         get_image
[  5095.205] (==) fglrx(0): Backing store enabled
[  5095.205] (==) fglrx(0): Silken mouse enabled
[  5095.205] (II) fglrx(0): Initializing HW Cursor
[  5095.205] (II) fglrx(0): Use standard UXA acceleration.
[  5095.205] (II) fglrx(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  5095.205] (**) fglrx(0): DPMS enabled
[  5095.205] (==) fglrx(0): Intel XvMC decoder enabled
[  5095.205] (II) fglrx(0): Set up textured video
[  5095.205] (II) fglrx(0): [XvMC] xvmc_vld driver initialized.
[  5095.205] (II) fglrx(0): direct rendering: DRI2 Enabled
[  5095.205] (WW) fglrx(0): Option "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, AllowNonEdidModes, NoEdidMaxPClkCheck" is not used
[  5095.205] (WW) fglrx(0): Option "UseEDID" is not used
[  5095.205] (WW) fglrx(0): Option "VendorName" is not used
[  5095.205] (WW) fglrx(0): Option "ModelName" is not used
[  5095.205] (WW) fglrx(0): Option "Shadow" is not used
[  5095.205] (WW) fglrx(0): Option "Tiling" is not used
[  5095.205] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[  5095.205] (==) fglrx(0): hotplug detection: "enabled"
[  5095.257] Loading extension ATIFGLRXDRI
[  5095.257] (II) fglrx(0): doing swlDriScreenInit
[  5095.257] (II) fglrx(0): swlDriScreenInit for fglrx driver
[  5095.257] ukiDynamicMajor: found major device number 250
[  5095.257] ukiDynamicMajor: found major device number 250
[  5095.257] ukiDynamicMajor: found major device number 250
[  5095.257] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  5095.258] ukiOpenDevice: node name is /dev/ati/card0
[  5095.258] ukiOpenDevice: open result is 14, (OK)
[  5095.258] ukiOpenByBusid: ukiOpenMinor returns 14
[  5095.258] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  5095.258] (II) fglrx(0): [uki] DRM interface version 1.0
[  5095.258] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[  5095.258] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x11aec000
[  5095.258] (II) fglrx(0): [uki] mapped SAREA 0x11aec000 to 0x7f61112d2000
[  5095.258] (II) fglrx(0): [uki] framebuffer handle = 0x11aed000
[  5095.258] (II) fglrx(0): [uki] added 1 reserved context for kernel
[  5095.258] (II) fglrx(0): swlDriScreenInit done
[  5095.258] (II) fglrx(0): Kernel Module Version Information:
[  5095.258] (II) fglrx(0):     Name: fglrx
[  5095.258] (II) fglrx(0):     Version: 14.20.7
[  5095.258] (II) fglrx(0):     Date: Sep  2 2014
[  5095.258] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[  5095.258] (II) fglrx(0): Kernel Module version matches driver.
[  5095.258] (II) fglrx(0): Kernel Module Build Time Information:
[  5095.258] (II) fglrx(0):     Build-Kernel UTS_RELEASE:        3.16.4-1-ARCH
[  5095.258] (II) fglrx(0):     Build-Kernel MODVERSIONS:        yes
[  5095.258] (II) fglrx(0):     Build-Kernel __SMP__:            yes
[  5095.258] (II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
[  5095.258] (II) fglrx(0): [uki] register handle = 0x11aee000
[  5095.261] (II) fglrx(0): DRI initialization successfull
[  5095.261] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010e0000
[  5095.261] (II) fglrx(0): Intel display surface mc addr for AMD: a7917000
[  5095.262] (==) fglrx(0): Backing store enabled
[  5095.262] Loading extension FGLRXEXTENSION
[  5095.262] (**) fglrx(0): DPMS enabled
[  5095.262] (II) fglrx(0): Initialized in-driver Xinerama extension
[  5095.262] (**) fglrx(0): Textured Video is enabled.
[  5095.262] (II) fglrx(0): GLESX enableFlags = 9040
[  5095.262] (II) fglrx(0): GLESX is enabled
[  5095.262] (II) LoadModule: "amdxmm"
[  5095.263] (II) Loading /usr/lib/xorg/modules/amdxmm.so
[  5095.263] (II) Module amdxmm: vendor="X.Org Foundation"
[  5095.263] 	compiled for 1.4.99.906, module version = 2.0.0
[  5095.264] Loading extension AMDXVOPL
[  5095.264] Loading extension AMDXVBA
[  5095.264] XvScreenInit: screen devPrivates ptr non-NULL before init
[  5095.265] (II) fglrx(0): UVD feature is enabled(II) fglrx(0): 
[  5095.270] (II) fglrx(0): Enable composite support successfully
[  5095.270] (WW) fglrx(0): Option "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, AllowNonEdidModes, NoEdidMaxPClkCheck" is not used
[  5095.270] (WW) fglrx(0): Option "UseEDID" is not used
[  5095.270] (WW) fglrx(0): Option "VendorName" is not used
[  5095.270] (WW) fglrx(0): Option "ModelName" is not used
[  5095.270] (WW) fglrx(0): Option "Shadow" is not used
[  5095.270] (WW) fglrx(0): Option "Tiling" is not used
[  5095.270] (WW) fglrx(0): Option "LinearFramebuffer" is not used
[  5095.270] (II) fglrx(0): X context handle = 0x7
[  5095.270] (II) fglrx(0): [DRI] installation complete
[  5095.281] (--) RandR disabled
[  5095.293] ukiDynamicMajor: found major device number 250
[  5095.293] ukiDynamicMajor: found major device number 250
[  5095.293] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  5095.293] ukiOpenDevice: node name is /dev/ati/card0
[  5095.293] ukiOpenDevice: open result is 15, (OK)
[  5095.293] ukiOpenByBusid: ukiOpenMinor returns 15
[  5095.293] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  5095.293] (EE) AIGLX error: failed to open /usr/X11R6/lib64/modules/dri/fglrx_dri.so, error[/usr/X11R6/lib64/modules/dri/fglrx_dri.so: cannot open shared object file: No such file or directory]
[  5095.295] ukiDynamicMajor: found major device number 250
[  5095.295] ukiDynamicMajor: found major device number 250
[  5095.295] ukiDynamicMajor: found major device number 250
[  5095.295] ukiOpenDevice: node name is /dev/ati/card0
[  5095.295] ukiOpenDevice: open result is 16, (OK)
[  5095.295] ukiGetBusid returned 'PCI:1:0:0'
[  5095.295] ukiOpenDevice: node name is /dev/ati/card1
[  5095.295] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card2
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card3
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card4
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card5
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card6
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card7
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card8
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card9
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card10
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card11
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: Open failed
[  5095.296] ukiOpenDevice: node name is /dev/ati/card12
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.296] ukiOpenDevice: open result is -1, (No such device)
[  5095.297] ukiOpenDevice: Open failed
[  5095.297] ukiOpenDevice: node name is /dev/ati/card13
[  5095.297] ukiOpenDevice: open result is -1, (No such device)
[  5095.297] ukiOpenDevice: open result is -1, (No such device)
[  5095.297] ukiOpenDevice: Open failed
[  5095.297] ukiOpenDevice: node name is /dev/ati/card14
[  5095.297] ukiOpenDevice: open result is -1, (No such device)
[  5095.297] ukiOpenDevice: open result is -1, (No such device)
[  5095.297] ukiOpenDevice: Open failed
[  5095.297] ukiOpenDevice: node name is /dev/ati/card15
[  5095.297] ukiOpenDevice: open result is -1, (No such device)
[  5095.297] ukiOpenDevice: open result is -1, (No such device)
[  5095.297] ukiOpenDevice: Open failed
[  5095.297] ukiDynamicMajor: found major device number 250
[  5095.297] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  5095.297] ukiOpenDevice: node name is /dev/ati/card0
[  5095.297] ukiOpenDevice: open result is 16, (OK)
[  5095.297] ukiOpenByBusid: ukiOpenMinor returns 16
[  5095.297] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  5095.352] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[  5095.352] ukiDynamicMajor: found major device number 250
[  5095.352] ukiDynamicMajor: found major device number 250
[  5095.352] ukiDynamicMajor: found major device number 250
[  5095.352] ukiOpenDevice: node name is /dev/ati/card0
[  5095.352] ukiOpenDevice: open result is 17, (OK)
[  5095.352] ukiGetBusid returned 'PCI:1:0:0'
[  5095.352] ukiOpenDevice: node name is /dev/ati/card1
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card2
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card3
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card4
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card5
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card6
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card7
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card8
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card9
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card10
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card11
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card12
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card13
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card14
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.353] ukiOpenDevice: node name is /dev/ati/card15
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: open result is -1, (No such device)
[  5095.353] ukiOpenDevice: Open failed
[  5095.354] ukiDynamicMajor: found major device number 250
[  5095.354] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  5095.354] ukiOpenDevice: node name is /dev/ati/card0
[  5095.354] ukiOpenDevice: open result is 17, (OK)
[  5095.354] ukiOpenByBusid: ukiOpenMinor returns 17
[  5095.354] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  5095.368] (II) fglrx(0): Setting screen physical size to 597 x 338
[  5095.419] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[  5095.419] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  5095.419] (II) LoadModule: "evdev"
[  5095.419] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[  5095.420] (II) Module evdev: vendor="X.Org Foundation"
[  5095.420] 	compiled for 1.15.1, module version = 2.9.0
[  5095.420] 	Module class: X.Org XInput Driver
[  5095.420] 	ABI class: X.Org XInput driver, version 20.0
[  5095.420] (II) Using input driver 'evdev' for 'Power Button'
[  5095.420] (**) Power Button: always reports core events
[  5095.420] (**) evdev: Power Button: Device: "/dev/input/event7"
[  5095.420] (--) evdev: Power Button: Vendor 0 Product 0x1
[  5095.420] (--) evdev: Power Button: Found keys
[  5095.420] (II) evdev: Power Button: Configuring as keyboard
[  5095.420] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event7"
[  5095.420] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  5095.420] (**) Option "xkb_rules" "evdev"
[  5095.420] (**) Option "xkb_model" "pc104"
[  5095.420] (**) Option "xkb_layout" "us"
[  5095.451] (II) config/udev: Adding input device Video Bus (/dev/input/event14)
[  5095.451] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  5095.451] (II) Using input driver 'evdev' for 'Video Bus'
[  5095.451] (**) Video Bus: always reports core events
[  5095.451] (**) evdev: Video Bus: Device: "/dev/input/event14"
[  5095.451] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  5095.451] (--) evdev: Video Bus: Found keys
[  5095.451] (II) evdev: Video Bus: Configuring as keyboard
[  5095.451] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event14"
[  5095.451] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  5095.451] (**) Option "xkb_rules" "evdev"
[  5095.451] (**) Option "xkb_model" "pc104"
[  5095.451] (**) Option "xkb_layout" "us"
[  5095.452] (II) config/udev: Adding input device Lid Switch (/dev/input/event5)
[  5095.452] (II) No input driver specified, ignoring this device.
[  5095.452] (II) This device may have been added with another device file.
[  5095.452] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[  5095.453] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[  5095.453] (II) Using input driver 'evdev' for 'Video Bus'
[  5095.453] (**) Video Bus: always reports core events
[  5095.453] (**) evdev: Video Bus: Device: "/dev/input/event13"
[  5095.453] (--) evdev: Video Bus: Vendor 0 Product 0x6
[  5095.453] (--) evdev: Video Bus: Found keys
[  5095.453] (II) evdev: Video Bus: Configuring as keyboard
[  5095.453] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2c/LNXVIDEO:00/input/input14/event13"
[  5095.453] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[  5095.453] (**) Option "xkb_rules" "evdev"
[  5095.453] (**) Option "xkb_model" "pc104"
[  5095.453] (**) Option "xkb_layout" "us"
[  5095.453] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[  5095.453] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[  5095.453] (II) Using input driver 'evdev' for 'Power Button'
[  5095.453] (**) Power Button: always reports core events
[  5095.453] (**) evdev: Power Button: Device: "/dev/input/event6"
[  5095.454] (--) evdev: Power Button: Vendor 0 Product 0x1
[  5095.454] (--) evdev: Power Button: Found keys
[  5095.454] (II) evdev: Power Button: Configuring as keyboard
[  5095.454] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event6"
[  5095.454] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[  5095.454] (**) Option "xkb_rules" "evdev"
[  5095.454] (**) Option "xkb_model" "pc104"
[  5095.454] (**) Option "xkb_layout" "us"
[  5095.454] (II) config/udev: Adding drm device (/dev/dri/card0)
[  5095.455] (II) config/udev: Adding input device HP TrueVision HD (/dev/input/event10)
[  5095.455] (**) HP TrueVision HD: Applying InputClass "evdev keyboard catchall"
[  5095.455] (II) Using input driver 'evdev' for 'HP TrueVision HD'
[  5095.455] (**) HP TrueVision HD: always reports core events
[  5095.455] (**) evdev: HP TrueVision HD: Device: "/dev/input/event10"
[  5095.455] (--) evdev: HP TrueVision HD: Vendor 0x64e Product 0xd281
[  5095.455] (--) evdev: HP TrueVision HD: Found keys
[  5095.455] (II) evdev: HP TrueVision HD: Configuring as keyboard
[  5095.455] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input12/event10"
[  5095.455] (II) XINPUT: Adding extended input device "HP TrueVision HD" (type: KEYBOARD, id 10)
[  5095.455] (**) Option "xkb_rules" "evdev"
[  5095.455] (**) Option "xkb_model" "pc104"
[  5095.455] (**) Option "xkb_layout" "us"
[  5095.456] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event16)
[  5095.456] (II) No input driver specified, ignoring this device.
[  5095.456] (II) This device may have been added with another device file.
[  5095.456] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
[  5095.456] (II) No input driver specified, ignoring this device.
[  5095.456] (II) This device may have been added with another device file.
[  5095.456] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event18)
[  5095.456] (II) No input driver specified, ignoring this device.
[  5095.456] (II) This device may have been added with another device file.
[  5095.457] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event19)
[  5095.457] (II) No input driver specified, ignoring this device.
[  5095.457] (II) This device may have been added with another device file.
[  5095.457] (II) config/udev: Adding input device Corsair Corsair K40A Gaming Keyboard (/dev/input/event1)
[  5095.457] (**) Corsair Corsair K40A Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[  5095.457] (II) Using input driver 'evdev' for 'Corsair Corsair K40A Gaming Keyboard'
[  5095.457] (**) Corsair Corsair K40A Gaming Keyboard: always reports core events
[  5095.457] (**) evdev: Corsair Corsair K40A Gaming Keyboard: Device: "/dev/input/event1"
[  5095.457] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Vendor 0x1b1c Product 0x1b0e
[  5095.457] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Found keys
[  5095.457] (II) evdev: Corsair Corsair K40A Gaming Keyboard: Configuring as keyboard
[  5095.457] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:19:00.0/usb2/2-2/2-2:1.0/0003:1B1C:1B0E.0001/input/input2/event1"
[  5095.457] (II) XINPUT: Adding extended input device "Corsair Corsair K40A Gaming Keyboard" (type: KEYBOARD, id 11)
[  5095.457] (**) Option "xkb_rules" "evdev"
[  5095.457] (**) Option "xkb_model" "pc104"
[  5095.457] (**) Option "xkb_layout" "us"
[  5095.458] (II) config/udev: Adding input device Corsair Corsair K40A Gaming Keyboard (/dev/input/event2)
[  5095.458] (**) Corsair Corsair K40A Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[  5095.458] (II) Using input driver 'evdev' for 'Corsair Corsair K40A Gaming Keyboard'
[  5095.458] (**) Corsair Corsair K40A Gaming Keyboard: always reports core events
[  5095.458] (**) evdev: Corsair Corsair K40A Gaming Keyboard: Device: "/dev/input/event2"
[  5095.458] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Vendor 0x1b1c Product 0x1b0e
[  5095.458] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Found 1 mouse buttons
[  5095.458] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Found scroll wheel(s)
[  5095.458] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Found relative axes
[  5095.458] (II) evdev: Corsair Corsair K40A Gaming Keyboard: Forcing relative x/y axes to exist.
[  5095.458] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Found absolute axes
[  5095.458] (II) evdev: Corsair Corsair K40A Gaming Keyboard: Forcing absolute x/y axes to exist.
[  5095.458] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Found keys
[  5095.458] (II) evdev: Corsair Corsair K40A Gaming Keyboard: Configuring as mouse
[  5095.458] (II) evdev: Corsair Corsair K40A Gaming Keyboard: Configuring as keyboard
[  5095.458] (II) evdev: Corsair Corsair K40A Gaming Keyboard: Adding scrollwheel support
[  5095.458] (**) evdev: Corsair Corsair K40A Gaming Keyboard: YAxisMapping: buttons 4 and 5
[  5095.459] (**) evdev: Corsair Corsair K40A Gaming Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  5095.459] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:19:00.0/usb2/2-2/2-2:1.1/0003:1B1C:1B0E.0002/input/input3/event2"
[  5095.459] (II) XINPUT: Adding extended input device "Corsair Corsair K40A Gaming Keyboard" (type: KEYBOARD, id 12)
[  5095.459] (**) Option "xkb_rules" "evdev"
[  5095.459] (**) Option "xkb_model" "pc104"
[  5095.459] (**) Option "xkb_layout" "us"
[  5095.459] (II) evdev: Corsair Corsair K40A Gaming Keyboard: initialized for relative axes.
[  5095.459] (WW) evdev: Corsair Corsair K40A Gaming Keyboard: ignoring absolute axes.
[  5095.459] (**) Corsair Corsair K40A Gaming Keyboard: (accel) keeping acceleration scheme 1
[  5095.459] (**) Corsair Corsair K40A Gaming Keyboard: (accel) acceleration profile 0
[  5095.459] (**) Corsair Corsair K40A Gaming Keyboard: (accel) acceleration factor: 2.000
[  5095.459] (**) Corsair Corsair K40A Gaming Keyboard: (accel) acceleration threshold: 4
[  5095.460] (II) config/udev: Adding input device Corsair Corsair K40A Gaming Keyboard (/dev/input/event3)
[  5095.460] (**) Corsair Corsair K40A Gaming Keyboard: Applying InputClass "evdev keyboard catchall"
[  5095.460] (II) Using input driver 'evdev' for 'Corsair Corsair K40A Gaming Keyboard'
[  5095.460] (**) Corsair Corsair K40A Gaming Keyboard: always reports core events
[  5095.460] (**) evdev: Corsair Corsair K40A Gaming Keyboard: Device: "/dev/input/event3"
[  5095.460] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Vendor 0x1b1c Product 0x1b0e
[  5095.460] (--) evdev: Corsair Corsair K40A Gaming Keyboard: Found keys
[  5095.460] (II) evdev: Corsair Corsair K40A Gaming Keyboard: Configuring as keyboard
[  5095.460] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1c.3/0000:19:00.0/usb2/2-2/2-2:1.2/0003:1B1C:1B0E.0003/input/input4/event3"
[  5095.460] (II) XINPUT: Adding extended input device "Corsair Corsair K40A Gaming Keyboard" (type: KEYBOARD, id 13)
[  5095.460] (**) Option "xkb_rules" "evdev"
[  5095.460] (**) Option "xkb_model" "pc104"
[  5095.460] (**) Option "xkb_layout" "us"
[  5095.461] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/event4)
[  5095.461] (**) Logitech Unifying Device. Wireless PID:1025: Applying InputClass "evdev pointer catchall"
[  5095.461] (II) Using input driver 'evdev' for 'Logitech Unifying Device. Wireless PID:1025'
[  5095.461] (**) Logitech Unifying Device. Wireless PID:1025: always reports core events
[  5095.461] (**) evdev: Logitech Unifying Device. Wireless PID:1025: Device: "/dev/input/event4"
[  5095.461] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Vendor 0x46d Product 0xc52b
[  5095.461] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found 20 mouse buttons
[  5095.461] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found scroll wheel(s)
[  5095.461] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found relative axes
[  5095.461] (--) evdev: Logitech Unifying Device. Wireless PID:1025: Found x and y relative axes
[  5095.461] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Configuring as mouse
[  5095.461] (II) evdev: Logitech Unifying Device. Wireless PID:1025: Adding scrollwheel support
[  5095.461] (**) evdev: Logitech Unifying Device. Wireless PID:1025: YAxisMapping: buttons 4 and 5
[  5095.461] (**) evdev: Logitech Unifying Device. Wireless PID:1025: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  5095.461] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.1/4-1.1:1.2/0003:046D:C52B.0006/0003:046D:C52B.0007/input/input5/event4"
[  5095.461] (II) XINPUT: Adding extended input device "Logitech Unifying Device. Wireless PID:1025" (type: MOUSE, id 14)
[  5095.461] (II) evdev: Logitech Unifying Device. Wireless PID:1025: initialized for relative axes.
[  5095.461] (**) Logitech Unifying Device. Wireless PID:1025: (accel) keeping acceleration scheme 1
[  5095.461] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration profile 0
[  5095.461] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration factor: 2.000
[  5095.461] (**) Logitech Unifying Device. Wireless PID:1025: (accel) acceleration threshold: 4
[  5095.462] (II) config/udev: Adding input device Logitech Unifying Device. Wireless PID:1025 (/dev/input/mouse0)
[  5095.462] (II) No input driver specified, ignoring this device.
[  5095.462] (II) This device may have been added with another device file.
[  5095.462] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[  5095.462] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[  5095.462] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[  5095.462] (**) AT Translated Set 2 keyboard: always reports core events
[  5095.462] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[  5095.462] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[  5095.462] (--) evdev: AT Translated Set 2 keyboard: Found keys
[  5095.462] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[  5095.462] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[  5095.462] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 15)
[  5095.462] (**) Option "xkb_rules" "evdev"
[  5095.462] (**) Option "xkb_model" "pc104"
[  5095.463] (**) Option "xkb_layout" "us"
[  5095.463] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
[  5095.463] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[  5095.463] (II) Using input driver 'evdev' for 'SynPS/2 Synaptics TouchPad'
[  5095.463] (**) SynPS/2 Synaptics TouchPad: always reports core events
[  5095.463] (**) evdev: SynPS/2 Synaptics TouchPad: Device: "/dev/input/event11"
[  5095.463] (--) evdev: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[  5095.463] (--) evdev: SynPS/2 Synaptics TouchPad: Found 3 mouse buttons
[  5095.463] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute axes
[  5095.463] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute multitouch axes
[  5095.463] (--) evdev: SynPS/2 Synaptics TouchPad: Found x and y absolute axes
[  5095.463] (--) evdev: SynPS/2 Synaptics TouchPad: Found absolute touchpad.
[  5095.463] (II) evdev: SynPS/2 Synaptics TouchPad: Configuring as touchpad
[  5095.463] (**) evdev: SynPS/2 Synaptics TouchPad: YAxisMapping: buttons 4 and 5
[  5095.463] (**) evdev: SynPS/2 Synaptics TouchPad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[  5095.463] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
[  5095.463] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 16)
[  5095.464] (II) evdev: SynPS/2 Synaptics TouchPad: initialized for absolute axes.
[  5095.464] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[  5095.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[  5095.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[  5095.464] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[  5095.464] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[  5095.464] (II) No input driver specified, ignoring this device.
[  5095.464] (II) This device may have been added with another device file.
[  5095.464] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event15)
[  5095.464] (II) No input driver specified, ignoring this device.
[  5095.464] (II) This device may have been added with another device file.
[  5095.465] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[  5095.465] (II) No input driver specified, ignoring this device.
[  5095.465] (II) This device may have been added with another device file.
[  5095.465] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[  5095.465] (II) No input driver specified, ignoring this device.
[  5095.465] (II) This device may have been added with another device file.
[  5095.466] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event9)
[  5095.466] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[  5095.466] (II) Using input driver 'evdev' for 'HP Wireless hotkeys'
[  5095.466] (**) HP Wireless hotkeys: always reports core events
[  5095.466] (**) evdev: HP Wireless hotkeys: Device: "/dev/input/event9"
[  5095.466] (--) evdev: HP Wireless hotkeys: Vendor 0 Product 0
[  5095.466] (--) evdev: HP Wireless hotkeys: Found keys
[  5095.466] (II) evdev: HP Wireless hotkeys: Configuring as keyboard
[  5095.466] (**) Option "config_info" "udev:/sys/devices/virtual/input/input10/event9"
[  5095.466] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 17)
[  5095.466] (**) Option "xkb_rules" "evdev"
[  5095.466] (**) Option "xkb_model" "pc104"
[  5095.466] (**) Option "xkb_layout" "us"
[  5095.466] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event12)
[  5095.466] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[  5095.466] (II) Using input driver 'evdev' for 'HP WMI hotkeys'
[  5095.466] (**) HP WMI hotkeys: always reports core events
[  5095.466] (**) evdev: HP WMI hotkeys: Device: "/dev/input/event12"
[  5095.467] (--) evdev: HP WMI hotkeys: Vendor 0 Product 0
[  5095.467] (--) evdev: HP WMI hotkeys: Found keys
[  5095.467] (II) evdev: HP WMI hotkeys: Configuring as keyboard
[  5095.467] (**) Option "config_info" "udev:/sys/devices/virtual/input/input13/event12"
[  5095.467] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 18)
[  5095.467] (**) Option "xkb_rules" "evdev"
[  5095.467] (**) Option "xkb_model" "pc104"
[  5095.467] (**) Option "xkb_layout" "us"
[  5095.471] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[  5095.904] (II) fglrx(0): EDID vendor "LGD", prod id 601
[  5095.904] (II) fglrx(0): Printing DDC gathered Modelines:
[  5095.904] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[  5096.202] (II) fglrx(0): Allocated new frame buffer 1920x1200 stride 7680, untiled
[  5096.264] (II) fglrx(0): Intel display surface mc addr for AMD: a7836000
[  5096.555] (II) fglrx(0): Intel display surface mc addr for AMD: a7836000
[  5097.322] (II) fglrx(0): EDID vendor "LGD", prod id 601
[  5097.322] (II) fglrx(0): Printing DDC gathered Modelines:
[  5097.322] (II) fglrx(0): Modeline "1920x1080"x0.0  138.50  1920 1968 2000 2080  1080 1083 1088 1111 -hsync -vsync (66.6 kHz eP)
[  5107.235] (II) fglrx(0): EDID vendor "DPL", prod id 0
[  5107.235] (II) fglrx(0): Using hsync ranges from config file
[  5107.235] (II) fglrx(0): Using vrefresh ranges from config file
[  5107.235] (II) fglrx(0): Printing DDC gathered Modelines:
[  5107.235] (II) fglrx(0): Modeline "2560x1440"x0.0  245.00  2560 2608 2640 2720  1440 1442 1447 1501 +hsync -vsync (90.1 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1202 1208 1235 +hsync -vsync (74.0 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1366x768"x0.0   85.80  1366 1436 1579 1792  768 771 774 798 -hsync -vsync (47.9 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  5107.235] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  5107.235] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  5107.235] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  5107.235] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  5107.235] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[  5107.235] (II) fglrx(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  5107.236] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[  5107.236] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[  5107.236] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[  5107.236] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  5107.236] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz e)
[  5107.236] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[  5107.236] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[  5107.236] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[  5107.236] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[  5107.236] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz e)
[  5154.556] (II) fglrx(0): EDID vendor "DPL", prod id 0
[  5154.556] (II) fglrx(0): Using hsync ranges from config file
[  5154.556] (II) fglrx(0): Using vrefresh ranges from config file
[  5154.556] (II) fglrx(0): Printing DDC gathered Modelines:
[  5154.556] (II) fglrx(0): Modeline "2560x1440"x0.0  245.00  2560 2608 2640 2720  1440 1442 1447 1501 +hsync -vsync (90.1 kHz e)
[  5154.556] (II) fglrx(0): Modeline "1920x1200"x0.0  154.00  1920 1968 2000 2080  1200 1202 1208 1235 +hsync -vsync (74.0 kHz e)
[  5154.556] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[  5154.556] (II) fglrx(0): Modeline "1366x768"x0.0   85.80  1366 1436 1579 1792  768 771 774 798 -hsync -vsync (47.9 kHz e)
[  5154.556] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  5154.556] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  5154.556] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  5154.556] (II) fglrx(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  5154.556] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  5154.556] (II) fglrx(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  5154.556] (II) fglrx(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  5154.557] (II) fglrx(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1440x900"x0.0   88.75  1440 1488 1520 1600  900 903 909 926 +hsync -vsync (55.5 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  5154.557] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[  5154.557] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1440x240"x0.0   27.00  1440 1478 1602 1716  240 244 247 262 -hsync -vsync (15.7 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[  5154.557] (II) fglrx(0): Modeline "1440x288"x0.0   27.00  1440 1464 1590 1728  288 290 293 312 -hsync -vsync (15.6 kHz e)

Another version of my xorg.conf:

Section "ServerLayout"
	Identifier     "Layout0"
	Screen      0  "Screen0" 0 0
	InputDevice    "Evdev Mouse"
	InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Module"
EndSection

Section "InputDevice"
	Identifier	"Keyboard0"
	Driver	"kbd"
	Option	"CoreKeyboard"
EndSection

Section "InputDevice"
	Identifier	"Evdev Mouse"
	Driver		"evdev"
	Option		"Name" "Logitech Unifying Device. Wireless PID:1025"
	Option		"evBits" "+1-2"
	Option		"keyBits" "~272-287"
	Option		"relBits" "~0-2 ~6 ~8"
	Option		"Pass"	"3"
#	Option		"CorePointer"
Endsection

Section "Monitor"
	Identifier   "Monitor0"
	Option	    "VendorName" "X-Star"
	Option	    "ModelName" "DP2710LED"
#	DisplaySize     597    336
#	HorizSync       88.8 - 160.0
#	VertRefresh     59.5 - 120.0
	ModeLine       "2560x1440"          241.50 2560 2608 2640 2720 1440 1443 1448 1481 +hsync -vsync
	ModeLine       "2560x1440_60"       312.25 2560 2752 3024 3488 1440 1443 1448 1493 -hsync +vsync
	ModeLine       "2560x1440_75"       397.25 2560 2760 3040 3520 1440 1443 1448 1506 -hsync +vsync
	ModeLine       "2560x1440_85"       454.75 2560 2768 3048 3536 1440 1443 1448 1514 -hsync +vsync
	ModeLine       "2560x1440_96"       400.00 2560 2608 2640 2744 1440 1443 1448 1512 +hsync +vsync
	Option      "PreferredMode" "2560x1440"
	Option      "Position" "0 0"
	Option	    "DPMS" "true"
EndSection

Section "Device"
	Identifier  "Device0"
	Driver      "fglrx"
	BusID       "PCI:1:0:0"
EndSection

Section "Screen"
	Identifier "Screen0"
	Device     "Device0"
	Monitor    "Monitor0"
	DefaultDepth     24
	Option         "UseEDID" "False"
	Option         "UseEDIDDPI" "False"
	Option         "UseEDIDFreqs" "False"
	Option         "ExactModeTimingsDVI" "True"
	Option         "ModeValidation" 
	Option		"AllowNonEdidModes"
	Option		"AllowNon60hzmodesDFPModes"
	Option		"NoEDIDDFPMaxSizeCheck"
	Option		"NoVertRefreshCheck"
	Option		"NoHorizSyncCheck"
	Option		"NoDFPNativeResolutionCheck"
	Option		"NoMaxSizeCheck"
	Option		"NoMaxPClkCheck"
	Option		"NoEDIDModes"
	Option         "NoBandWidthTest" "true"
	SubSection "Display"
		Viewport   0 0
		Depth     16
		Modes	"2560x1440" "2560x1440_60" "2560x1440_75" "2560x1440_85" "2560x1440_96"
		Virtual	4600 3000
	EndSubSection
EndSection

xrandr:

$ cvt 2560 1440
# 2560x1440 59.96 Hz (CVT 3.69M9) hsync: 89.52 kHz; pclk: 312.25 MHz
Modeline "2560x1440_60.00"  312.25  2560 2752 3024 3488  1440 1443 1448 1493 -hsync +vsync

$ xrandr --newmode "2560x1440_60.00"  312.25  2560 2752 3024 3488  1440 1443 1448 1493 -hsync +vsync
$ xrandr --addmode HDMI1 2560x1440_60.00
xrandr
Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
LVDS1 connected (normal left inverted right x axis y axis)
   1920x1080     59.93 +
   1400x1050     59.98  
   1280x1024     60.02  
   1280x960      60.00  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       59.94  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected primary 1920x1200+0+0 (normal left inverted right x axis y axis) 596mm x 335mm
   1920x1200     59.95* 
   1920x1080     60.00    50.00    59.94  
   1920x1080i    60.00    50.00    59.94  
   1600x1200     60.00  
   1680x1050     59.88  
   1280x1024     75.02    60.02  
   1440x900      59.90  
   1366x768      60.00  
   1152x864      75.00  
   1280x720      60.00    50.00    59.94  
   1440x576i     50.00  
   1024x768      75.08    60.00  
   1440x480i     60.00    59.94  
   800x600       75.00    60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    60.00    59.94  
   720x400       70.08  
   2560x1440_60.00  59.96  

$ xrandr --output HDMI1 --mode 2560x1440_60.00
$ xrandr 
Screen 0: minimum 320 x 200, current 2560 x 1440, maximum 8192 x 8192
LVDS1 connected (normal left inverted right x axis y axis)
   1920x1080     59.93 +
   1400x1050     59.98  
   1280x1024     60.02  
   1280x960      60.00  
   1024x768      60.00  
   800x600       60.32    56.25  
   640x480       59.94  
VGA1 disconnected (normal left inverted right x axis y axis)
HDMI1 connected primary 2560x1440+0+0 (normal left inverted right x axis y axis) 596mm x 335mm
   1920x1200     59.95  
   1920x1080     60.00    50.00    59.94  
   1920x1080i    60.00    50.00    59.94  
   1600x1200     60.00  
   1680x1050     59.88  
   1280x1024     75.02    60.02  
   1440x900      59.90  
   1366x768      60.00  
   1152x864      75.00  
   1280x720      60.00    50.00    59.94  
   1440x576i     50.00  
   1024x768      75.08    60.00  
   1440x480i     60.00    59.94  
   800x600       75.00    60.32  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    60.00    59.94  
   720x400       70.08  
   2560x1440_60.00  59.96* 

fgl_glxgears 
Using GLX_SGIX_pbuffer
709 frames in 5.0 seconds = 141.800 FPS
677 frames in 5.0 seconds = 135.400 FPS
678 frames in 5.0 seconds = 135.600 FPS

The resolution does not seem to change, it stretchs a bit horizontally (where the right hand side of my screen goes off the screen - as in the mouse disappears on that side). I've tried numerous xorg.conf files, different settings and nothing will work

The monitor is a Korean monitor (same as the QNIX varient) that supports 1440p. Trying to push anything above 45Hz using the Intel driver displays an error message Configure CRTC 0 failed. If i could do 55-60Hz using the Intel driver, i wouldnt even try the catalyst driver.

Can someone please help me? If i can do 2560x1400@45Hz using the Intel card, why cant i even do this using the catalyst driver? I googled as much as i could, but nothing, it seems that for some reason using xrandr with catalyst doesnt seem to work for me.

Thank you.

herOldMan · 2014-10-13 17:06:17

We have a machine with a Radeon 3000 GPU that connects to a TV. The catalyst-hd234k drivers, installed from the unofficial repo, are a must for this machine because the monitor resists all attempts to use the open source driver. Among other things, it runs pipelight, which requires lib32-libgl. Back on 10/4 I started a thread at https://bbs.archlinux.org/viewtopic.php … 2#p1464192 because I was unable to safely update. The original thread pointed me to the maintainer. Following this route leads me to here, where the question appears to be included by another.

For convenience, here is the output again:

Pacman -Syu
:: Synchronizing package databases...
 xorg112 is up to date
 catalyst-hd234k is up to date
 core is up to date
 extra                   1767.0 KiB   374K/s 00:05 [######################] 100%
 community                  2.3 MiB   374K/s 00:06 [######################] 100%
 multilib                 118.7 KiB   369K/s 00:00 [######################] 100%
 pipelight is up to date
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: lib32-mesa-dri and lib32-catalyst-utils are in conflict (lib32-ati-dri). Remove lib32-catalyst-utils? [y/N] y

###If answered yes, then:

error: failed to prepare transaction (could not satisfy dependencies)
:: lib32-mesa-dri: requires lib32-libtxc_dxtn
:: lib32-catalyst-libgl: requires lib32-catalyst-utils

Here are the packages I have installed:

catalyst-hook 13.1-22
catalyst-libgl 13.1-8
catalyst-utils 13.1-9
lib32-catalyst-libgl 13.1-8
lib32-catalyst-utils 13.1-7
lib32-opencl-catalyst 13.1-7
opencl-catalyst 13.1-7

(All installed from the Unofficial User Repo.)

There appears to be yet another posting of this question at https://bbs.archlinux.org/viewtopic.php?id=187532, which, based on its short life, was related to the testing repo - not used by me.

Should I continue to postpone upgrading this machine, or is there a methodical work-around.

Vi0L0 · 2014-10-13 20:31:08

Thanks for the head up, lib32-catalyst-utils 13.1-10 should fix this.
I have also found an old bug (packaging bug which showed up after some pacman update, not functional bug) in this pkg so I fixed it, if its claiming about conflicting files (like /usr/lib32/libAMDXvBA.so.1) then you can safely overwrite them, or remove conflicting files before an update.

Last edited by Vi0L0 (2014-10-13 20:35:19)

herOldMan · 2014-10-14 13:12:51

That worked perfectly. Thanks for your work on this project.

parashep · 2014-10-17 05:47:34

heads up. looks like the latest version of GNOME that just dropped (3.14) is incompatible with Catalyst. not only does GDM fail to start with this version, so does gnome-session itself.

https://bbs.archlinux.org/viewtopic.php?id=188475

EDIT: this bug had me switch to the open source radeon drivers, but looks like I get better performance across the board with those. I don't even want to go back now!

Last edited by parashep (2014-10-17 06:13:57)

causa-prima · 2014-10-17 12:59:51

If only the OSS drivers supported FullRGB over HDMI I would switch, too

zoqaeski · 2014-10-17 13:43:31

I wish ATI would just fix the Catalyst drivers so they could use KMS and all the other features. Either that or fund the writing of open-source drivers that could finally render their dodgy proprietary ones obsolete.

I can't get GNOME 3.14 to load either, same fatal error, and it's only been since 3.12 that I've been impressed enough with it to make the switch away from Cinnamon. I tried switching to the open-source drivers to see if that would fix the GNOME issue, and it turns out that they won't run at all. Black screen because I have to disable KMS. I had a bit of success with them a few months back.

SnowyMan95 · 2014-10-17 17:35:39

@zoqaeski
You probably need to remove all the catalyst packages and then install the open-source driver. For some reason even though there's no dependency conflict between them they won't run unless catalyst is fully removed idk why.

And btw. gnome 3.14 with catalyst's broken for me too :<

shox · 2014-10-17 22:47:19

Hi, I'm trying to use an HD 8730M with an Intel HD4000 on a HP 840 G1, but I'm really unable to use the AMD card, when I'm using PRIME with Open Source drivers, if I launch for example steam, it just show horrible glitches. So I tested the Proprietary drivers : I had exactly the same problem as vipo while I'm using Xorg 16 (with fglrx(0): failed to map MMIO register space!(EE) fglrx(0): MapMMIO failed )
So, I downgraded to Xorg 15 and now, if I switch to the AMD card with pxp_switch_catalyst (the Intel card still works good), the computer blink for a second and came back ont the TTY and I'm unable to do anything, I can't go to another TTY, I'm just able to stop the system with the power button.
The bad thing is that it doesn't write anything in the log and it doesn't write anything if I redirect the output on a file !
It's a very bad description of the problem but I can't give you anything more.. Would you have some ideas ? Thanks !

Kopkins · 2014-10-18 04:12:25

For AMD APUs, can they only use xf86-video-ati or will they also benefit from using the proprietary drivers?

My computer has only an AMD A-10;

Reznor · 2014-10-18 11:53:09

Just have to say that all my problems went away with Xorg 1.16 and kernel 3.16
So, no more overheats, laptop cold start temperature is 38C, on load about 56C which is incredible compared to what I had earlier.
It seems that radeon.dpm=0 is no longer needed, I haven't seen old issue yet with washed out stripes. And on top of all that, brightness controls are now working natively, no more flickering and lag when changing brightness with fn+f5/f6, then, I can switch to external display modes (cloned,single, etc.) without having to reboot system, as I had with fglrx. I hope it will stay like this in future
My laptop is ASUS K55N-DS81 with APU A8-4500M and HD7640G graphics.

Last edited by Reznor (2014-10-18 11:54:15)

IVIonty · 2014-10-18 20:13:54

Reznor wrote:

Just have to say that all my problems went away with Xorg 1.16 and kernel 3.16
So, no more overheats, laptop cold start temperature is 38C, on load about 56C which is incredible compared to what I had earlier.
It seems that radeon.dpm=0 is no longer needed, I haven't seen old issue yet with washed out stripes. And on top of all that, brightness controls are now working natively, no more flickering and lag when changing brightness with fn+f5/f6, then, I can switch to external display modes (cloned,single, etc.) without having to reboot system, as I had with fglrx. I hope it will stay like this in future
My laptop is ASUS K55N-DS81 with APU A8-4500M and HD7640G graphics.

M8 I have the same hardware configuration.

Now using Arch + KDE and Arch + XFCE without problems with Vi0l0's Catalyst-hook packages.

However I'm able to run GNOME 3.14 only with open source drivers. Overheat problems are gone, but actually I get some problems of power consumption: laptop's battery life is still better with Catalyst (using amdconfig --px-igpu and battery oriented power management).

Do you are using some power management configuration with open drivers? I tried dpm + poweroff discrete gpu (https://wiki.archlinux.org/index.php/ATI#Powersaving) but I'm unable to set battery mode, and overall battery life isn't very good.

Daniel.White · 2014-10-18 20:51:51

I can't start gnome with gdm 3.14, I have to use 3.10 to start it.
I have an HP-pavillion with hybrid graphic Ati/Intel. Does anyone have the same problem or know how to solve it?

clfarron4 · 2014-10-18 21:20:05

Kopkins wrote:

For AMD APUs, can they only use xf86-video-ati or will they also benefit from using the proprietary drivers?
My computer has only an AMD A-10;

I get better performance with AMD Catalyst on my AMD A6 3305M APU than I do Open Source.

Arch Linux

#6751 2014-10-08 19:38:45

Re: The AMD/ATI Bar & Grill

#6752 2014-10-09 17:03:50

Re: The AMD/ATI Bar & Grill

#6753 2014-10-09 17:46:50

Re: The AMD/ATI Bar & Grill

#6754 2014-10-09 18:27:49

Re: The AMD/ATI Bar & Grill

#6755 2014-10-09 18:39:59

Re: The AMD/ATI Bar & Grill

#6756 2014-10-09 18:42:55

Re: The AMD/ATI Bar & Grill

#6757 2014-10-09 18:45:49

Re: The AMD/ATI Bar & Grill

#6758 2014-10-09 19:25:01

Re: The AMD/ATI Bar & Grill

#6759 2014-10-09 19:33:44

Re: The AMD/ATI Bar & Grill

#6760 2014-10-09 20:29:07

Re: The AMD/ATI Bar & Grill

#6761 2014-10-09 22:55:15

Re: The AMD/ATI Bar & Grill

#6762 2014-10-10 07:21:31

Re: The AMD/ATI Bar & Grill

#6763 2014-10-13 17:06:17

Re: The AMD/ATI Bar & Grill

#6764 2014-10-13 20:31:08

Re: The AMD/ATI Bar & Grill

#6765 2014-10-14 13:12:51

Re: The AMD/ATI Bar & Grill

#6766 2014-10-17 05:47:34

Re: The AMD/ATI Bar & Grill

#6767 2014-10-17 12:59:51

Re: The AMD/ATI Bar & Grill

#6768 2014-10-17 13:43:31

Re: The AMD/ATI Bar & Grill

#6769 2014-10-17 17:35:39

Re: The AMD/ATI Bar & Grill

#6770 2014-10-17 22:47:19

Re: The AMD/ATI Bar & Grill

#6771 2014-10-18 04:12:25

Re: The AMD/ATI Bar & Grill

#6772 2014-10-18 11:53:09

Re: The AMD/ATI Bar & Grill

#6773 2014-10-18 20:13:54

Re: The AMD/ATI Bar & Grill

#6774 2014-10-18 20:51:51

Re: The AMD/ATI Bar & Grill

#6775 2014-10-18 21:20:05

Re: The AMD/ATI Bar & Grill

Board footer