[Solved] RTNETLINK answers: Input/output error

mshan · 2014-04-30 08:13:40

I recently installed Arch+ratpoison on HP touchsmart 11 netbook. No network manager.

After an updating, the command :
# ip link set wlo1 up (my wireless name is "wlo1")
return this error below:

RTNETLINK answers: Input/output error

how can I fix it?

Last edited by mshan (2014-04-30 09:32:14)

Rexilion · 2014-04-30 08:39:06

Could you run the command and provide the output of dmesg?

mshan · 2014-04-30 08:45:11

yes,
$ dmesg | grep firmware
retrun

[ 118.837401] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 118.847163] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37

mshan · 2014-04-30 09:25:54

it's strange, it's ok now after two or three times reboot and connecting wired connection.

just connecting wired connection and rebooting fixed my problem, I think.

sorry for my preposting here...

Rexilion · 2014-04-30 09:26:26

Could you provide a full dmesg?

scientistnik · 2014-10-12 14:41:16

I have this problem! Rebooting not resolve this!
#dmesg | grep

return this:
[ 8.510272] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[ 8.513843] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 16.399636] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 16.436792] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 17.782483] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 19.114660] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 19.114856] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 20.460331] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 21.792374] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 21.792381] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 35.607535] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 36.939678] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 36.939687] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 95.553787] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 96.886000] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 96.886012] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)

Rexilion · 2014-10-12 14:42:51

scientistnik wrote:

I have this problem! Rebooting not resolve this!
#dmesg | grep
return this:
[ 8.510272] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 3290, rev 0015 detected
[ 8.513843] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 3290 detected
[ 16.399636] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt3290.bin'
[ 16.436792] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.37
[ 17.782483] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 19.114660] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 19.114856] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 20.460331] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 21.792374] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 21.792381] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 35.607535] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 36.939678] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 36.939687] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)
[ 95.553787] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 96.886000] ieee80211 phy0: rt2800_wait_wpdma_ready: Error - WPDMA TX/RX busy [0x00000068]
[ 96.886012] ieee80211 phy0: rt2800pci_set_device_state: Error - Device failed to enter state 4 (-5)

Did you temporarily connect your notebook with the ethernet port?

scientistnik · 2014-10-12 15:47:15

Rexilion wrote:

Did you temporarily connect your notebook with the ethernet port?

Yes!

Rexilion · 2014-10-12 16:05:38

Make sure you have your kernel and linux-firmware packages updated.

betseg · 2015-07-16 19:56:05

I have the same problem... Nothing worked yet.

Rexilion · 2015-07-17 14:00:53

betseg wrote:

I have the same problem... Nothing worked yet.

Please open a new thread, this one is outdated.

Arch Linux

#1 2014-04-30 08:13:40

[Solved] RTNETLINK answers: Input/output error

#2 2014-04-30 08:39:06

Re: [Solved] RTNETLINK answers: Input/output error

#3 2014-04-30 08:45:11

Re: [Solved] RTNETLINK answers: Input/output error

#4 2014-04-30 09:25:54

Re: [Solved] RTNETLINK answers: Input/output error

#5 2014-04-30 09:26:26

Re: [Solved] RTNETLINK answers: Input/output error

#6 2014-10-12 14:41:16

Re: [Solved] RTNETLINK answers: Input/output error

#7 2014-10-12 14:42:51

Re: [Solved] RTNETLINK answers: Input/output error

#8 2014-10-12 15:47:15

Re: [Solved] RTNETLINK answers: Input/output error

#9 2014-10-12 16:05:38

Re: [Solved] RTNETLINK answers: Input/output error

#10 2015-07-16 19:56:05

Re: [Solved] RTNETLINK answers: Input/output error

#11 2015-07-17 14:00:53

Re: [Solved] RTNETLINK answers: Input/output error

Board footer