You are not logged in.
Pages: 1
I am running a vm install of arch and I cannot get startx to work. I went through the wiki section "Xorg as a systemd user service" and tried what it suggested and still it would not work. Below is my log file. Anyone have any suggestions? Thanks!
[herminio@archlinux-vm ~]$ cat .local/share/xorg/Xorg.0.log
[ 697.138]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 697.141] X Protocol Version 11, Revision 0
[ 697.143] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 697.144] Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[ 697.144] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 697.146] Build Date: 10 November 2014 07:52:13PM
[ 697.148]
[ 697.149] Current version of pixman: 0.32.6
[ 697.152] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 697.152] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 697.156] (==) Log file: "/home/herminio/.local/share/xorg/Xorg.0.log", Time: Sat Nov 15 14:29:26 2014
[ 697.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 697.158] (==) No Layout section. Using the first Screen section.
[ 697.158] (==) No screen section available. Using defaults.
[ 697.158] (**) |-->Screen "Default Screen Section" (0)
[ 697.158] (**) | |-->Monitor "<default monitor>"
[ 697.158] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 697.158] (==) Automatically adding devices
[ 697.158] (==) Automatically enabling devices
[ 697.158] (==) Automatically adding GPU devices
[ 697.158] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 697.158] Entry deleted from font path.
[ 697.158] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 697.158] Entry deleted from font path.
[ 697.158] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 697.158] Entry deleted from font path.
[ 697.158] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 697.158] Entry deleted from font path.
[ 697.158] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 697.158] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 697.158] Entry deleted from font path.
[ 697.158] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 697.158] (==) FontPath set to:
/usr/share/fonts/misc/
[ 697.158] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 697.158] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 697.158] (II) Loader magic: 0x818d80
[ 697.158] (II) Module ABI versions:
[ 697.158] X.Org ANSI C Emulation: 0.4
[ 697.158] X.Org Video Driver: 18.0
[ 697.158] X.Org XInput driver : 21.0
[ 697.158] X.Org Server Extension : 8.0
[ 697.161] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 697.161] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 697.161] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 697.200] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
[ 697.200] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 697.200] (II) LoadModule: "glx"
[ 697.200] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 697.245] (II) Module glx: vendor="NVIDIA Corporation"
[ 697.245] compiled for 4.0.2, module version = 1.0.0
[ 697.245] Module class: X.Org Server Extension
[ 697.245] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 697.246] (==) Matched vmware as autoconfigured driver 0
[ 697.246] (==) Matched vmware as autoconfigured driver 1
[ 697.246] (==) Matched modesetting as autoconfigured driver 2
[ 697.246] (==) Matched fbdev as autoconfigured driver 3
[ 697.246] (==) Matched vesa as autoconfigured driver 4
[ 697.246] (==) Assigned the driver to the xf86ConfigLayout
[ 697.246] (II) LoadModule: "vmware"
[ 697.246] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 697.280] (II) Module vmware: vendor="X.Org Foundation"
[ 697.281] compiled for 1.16.0, module version = 13.0.2
[ 697.281] Module class: X.Org Video Driver
[ 697.281] ABI class: X.Org Video Driver, version 18.0
[ 697.281] (II) LoadModule: "modesetting"
[ 697.281] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 697.281] (II) Module modesetting: vendor="X.Org Foundation"
[ 697.281] compiled for 1.16.0, module version = 0.9.0
[ 697.281] Module class: X.Org Video Driver
[ 697.281] ABI class: X.Org Video Driver, version 18.0
[ 697.281] (II) LoadModule: "fbdev"
[ 697.282] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 697.282] (II) Module fbdev: vendor="X.Org Foundation"
[ 697.282] compiled for 1.16.0, module version = 0.4.4
[ 697.282] Module class: X.Org Video Driver
[ 697.282] ABI class: X.Org Video Driver, version 18.0
[ 697.282] (II) LoadModule: "vesa"
[ 697.282] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 697.282] (II) Module vesa: vendor="X.Org Foundation"
[ 697.282] compiled for 1.16.0, module version = 2.3.2
[ 697.282] Module class: X.Org Video Driver
[ 697.282] ABI class: X.Org Video Driver, version 18.0
[ 697.282] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 697.282] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 697.283] (II) FBDEV: driver for framebuffer: fbdev
[ 697.283] (II) VESA: driver for VESA chipsets: vesa
[ 697.283] (++) using VT number 1
[ 697.283] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 697.283] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 697.283] (WW) Falling back to old probe method for modesetting
[ 697.283] (WW) Falling back to old probe method for fbdev
[ 697.283] (II) Loading sub module "fbdevhw"
[ 697.283] (II) LoadModule: "fbdevhw"
[ 697.283] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 697.283] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 697.283] compiled for 1.16.2, module version = 0.0.2
[ 697.283] ABI class: X.Org Video Driver, version 18.0
[ 697.283] (EE) open /dev/fb0: Permission denied
[ 697.283] (WW) Falling back to old probe method for vesa
[ 697.283] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 697.284] (II) vmware(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 697.284] (--) vmware(0): DRM driver version is 2.6.1
[ 697.284] (EE) vmware(0): Failed to detect device screen object capability.
[ 697.284] (WW) vmware(0): Disabling 3D support.
[ 697.284] (WW) vmware(0): Disabling Render Acceleration.
[ 697.284] (WW) vmware(0): Disabling RandR12+ support.
[ 697.284] (--) vmware(0): VMware SVGA regs at (0x1070, 0x1071)
[ 697.284] (II) Loading sub module "vgahw"
[ 697.284] (II) LoadModule: "vgahw"
[ 697.284] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 697.284] (II) Module vgahw: vendor="X.Org Foundation"
[ 697.284] compiled for 1.16.2, module version = 0.1.0
[ 697.284] ABI class: X.Org Video Driver, version 18.0
[ 697.299] (EE)
[ 697.299] (EE) Backtrace:
[ 697.300] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x593d36]
[ 697.300] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x197e89) [0x597e89]
[ 697.300] (EE) 2: /usr/lib/libc.so.6 (0x7f1fe4f6b000+0x339f0) [0x7f1fe4f9e9f0]
[ 697.300] (EE) 3: /usr/lib/libpciaccess.so.0 (pci_io_write8+0x3) [0x7f1fe631a923]
[ 697.300] (EE) 4: /usr/lib/xorg/modules/libvgahw.so (vgaHWSaveColormap+0x5b) [0x7f1fdb2adfbb]
[ 697.300] (EE) 5: /usr/lib/xorg/modules/libvgahw.so (vgaHWSave+0x55) [0x7f1fdb2afd55]
[ 697.300] (EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f1fdeedc000+0x7dce) [0x7f1fdeee3dce]
[ 697.300] (EE) 7: /usr/bin/Xorg.bin (InitOutput+0xa9f) [0x47a28f]
[ 697.300] (EE) 8: /usr/bin/Xorg.bin (0x400000+0x3b65a) [0x43b65a]
[ 697.300] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f1fe4f8b040]
[ 697.300] (EE) 10: /usr/bin/Xorg.bin (0x400000+0x25d0e) [0x425d0e]
[ 697.300] (EE)
[ 697.300] (EE) Segmentation fault at address 0x8
[ 697.300] (EE)
Fatal server error:
[ 697.300] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 697.300] (EE)
[ 697.300] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 697.300] (EE) Please also check the log file at "/home/herminio/.local/share/xorg/Xorg.0.log" for additional information.
[ 697.300] (EE)
[ 697.308] (EE) Server terminated with error (1). Closing log file.
[herminio@archlinux-vm ~]$
Last edited by rican-linux (2014-11-17 07:45:54)
Offline
First step to setting up a GUI is installing video drivers.
https://wiki.archlinux.org/index.php/Ge … _interface
Which Drivers did you load?
pacman -S xf86-video-vesa? perhaps?
Offline
Here are the packages I installed
[herminio@archlinux-vm ~]$ sudo pacman -Q | grep xf86-video
xf86-video-ark 0.7.5-5
xf86-video-ast 0.97.0-5
xf86-video-ati 1:7.5.0-1
xf86-video-cirrus 1.5.2-4
xf86-video-dummy 0.3.7-3
xf86-video-fbdev 0.4.4-3
xf86-video-glint 1.2.8-5
xf86-video-i128 1.3.6-5
xf86-video-intel 2.99.916-3
xf86-video-mach64 6.9.4-4
xf86-video-mga 1.6.3-3
xf86-video-modesetting 0.9.0-2
xf86-video-neomagic 1.2.8-3
xf86-video-nouveau 1.0.11-2
xf86-video-nv 2.1.20-5
xf86-video-openchrome 0.3.3-4
xf86-video-r128 6.9.2-3
xf86-video-savage 2.3.7-3
xf86-video-siliconmotion 1.7.7-5
xf86-video-sis 0.10.7-6
xf86-video-tdfx 1.4.5-5
xf86-video-trident 1.3.6-6
xf86-video-v4l 0.2.0-14
xf86-video-vesa 2.3.2-5
xf86-video-vmware 13.0.2-2
xf86-video-voodoo 1.2.5-5
I made some edits to the org.conf and now I am seeing this:
[herminio@archlinux-vm ~]$ startx
X.Org X Server 1.16.2
Release Date: 2014-11-10
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.17.2-1-ARCH x86_64
Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
Build Date: 10 November 2014 07:52:13PM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 15 16:08:43 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
VMware: No 3D enabled (0, Success).
^Cxinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 0 (Success) on X server ":0"
after 896 requests (896 known processed) with 0 events remaining.
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":0"
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":0"
(EE) Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
Couldn't get a file descriptor referring to the console
[herminio@archlinux-vm ~]$ cat /var/log/Xorg.0.log
[ 2861.854]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 2861.854] X Protocol Version 11, Revision 0
[ 2861.854] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 2861.855] Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[ 2861.855] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 2861.855] Build Date: 10 November 2014 07:52:13PM
[ 2861.856]
[ 2861.856] Current version of pixman: 0.32.6
[ 2861.856] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2861.856] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2861.858] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 15 16:08:43 2014
[ 2861.859] (==) Using config file: "/etc/X11/xorg.conf"
[ 2861.860] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2861.860] (==) ServerLayout "X.org Configured"
[ 2861.860] (**) |-->Screen "Screen0" (0)
[ 2861.860] (**) | |-->Monitor "Monitor0"
[ 2861.860] (**) | |-->Device "Card0"
[ 2861.860] (**) |-->Input Device "Mouse0"
[ 2861.860] (**) |-->Input Device "Keyboard0"
[ 2861.860] (==) Automatically adding devices
[ 2861.860] (==) Automatically enabling devices
[ 2861.860] (==) Automatically adding GPU devices
[ 2861.860] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2861.860] Entry deleted from font path.
[ 2861.860] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2861.860] Entry deleted from font path.
[ 2861.860] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2861.860] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 2861.860] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2861.860] (WW) Disabling Mouse0
[ 2861.860] (WW) Disabling Keyboard0
[ 2861.860] (II) Loader magic: 0x818d80
[ 2861.860] (II) Module ABI versions:
[ 2861.860] X.Org ANSI C Emulation: 0.4
[ 2861.860] X.Org Video Driver: 18.0
[ 2861.860] X.Org XInput driver : 21.0
[ 2861.860] X.Org Server Extension : 8.0
[ 2861.863] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 2861.864] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2861.865] (EE) systemd-logind: failed to take device /dev/dri/card0: Operation not permitted
[ 2861.886] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
[ 2861.886] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2861.886] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 2861.886] (II) LoadModule: "glx"
[ 2861.887] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2861.931] (II) Module glx: vendor="NVIDIA Corporation"
[ 2861.931] compiled for 4.0.2, module version = 1.0.0
[ 2861.931] Module class: X.Org Server Extension
[ 2861.931] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 2861.931] (II) LoadModule: "vmware"
[ 2861.932] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 2861.959] (II) Module vmware: vendor="X.Org Foundation"
[ 2861.959] compiled for 1.16.0, module version = 13.0.2
[ 2861.959] Module class: X.Org Video Driver
[ 2861.959] ABI class: X.Org Video Driver, version 18.0
[ 2861.959] (II) LoadModule: "vmware"
[ 2861.959] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 2861.959] (II) Module vmware: vendor="X.Org Foundation"
[ 2861.959] compiled for 1.16.0, module version = 13.0.2
[ 2861.959] Module class: X.Org Video Driver
[ 2861.959] ABI class: X.Org Video Driver, version 18.0
[ 2861.959] (II) UnloadModule: "vmware"
[ 2861.959] (II) Unloading vmware
[ 2861.959] (II) Failed to load module "vmware" (already loaded, 0)
[ 2861.959] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 2861.959] (--) using VT number 2
[ 2861.963] (--) vmware(0): DRM driver version is 2.6.1
[ 2861.963] (==) vmware(0): Depth 24, (--) framebuffer bpp 32
[ 2861.963] (==) vmware(0): RGB weight 888
[ 2861.963] (==) vmware(0): Default visual is TrueColor
[ 2861.963] (--) vmware(0): Min width 1, Max Width 8192.
[ 2861.963] (--) vmware(0): Min height 1, Max Height 8192.
[ 2861.964] (II) vmware(0): Output Virtual1 using monitor section Monitor0
[ 2861.964] (II) vmware(0): Output Virtual2 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual3 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual4 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual5 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual6 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual7 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual8 has no monitor section
[ 2861.964] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 2861.964] (II) vmware(0): Printing probed modes for output Virtual1
[ 2861.964] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 2861.964] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2861.964] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 2861.964] (II) vmware(0): EDID for output Virtual2
[ 2861.965] (II) vmware(0): EDID for output Virtual3
[ 2861.965] (II) vmware(0): EDID for output Virtual4
[ 2861.965] (II) vmware(0): EDID for output Virtual5
[ 2861.965] (II) vmware(0): EDID for output Virtual6
[ 2861.965] (II) vmware(0): EDID for output Virtual7
[ 2861.965] (II) vmware(0): EDID for output Virtual8
[ 2861.965] (II) vmware(0): Output Virtual1 connected
[ 2861.965] (II) vmware(0): Output Virtual2 disconnected
[ 2861.965] (II) vmware(0): Output Virtual3 disconnected
[ 2861.965] (II) vmware(0): Output Virtual4 disconnected
[ 2861.965] (II) vmware(0): Output Virtual5 disconnected
[ 2861.965] (II) vmware(0): Output Virtual6 disconnected
[ 2861.965] (II) vmware(0): Output Virtual7 disconnected
[ 2861.965] (II) vmware(0): Output Virtual8 disconnected
[ 2861.965] (II) vmware(0): Using exact sizes for initial modes
[ 2861.965] (II) vmware(0): Output Virtual1 using initial mode 1280x768
[ 2861.965] (II) vmware(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2861.965] (==) vmware(0): DPI set to (96, 96)
[ 2861.965] (II) Loading sub module "fb"
[ 2861.965] (II) LoadModule: "fb"
[ 2861.965] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2861.965] (II) Module fb: vendor="X.Org Foundation"
[ 2861.965] compiled for 1.16.2, module version = 1.0.0
[ 2861.965] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2861.965] (II) Loading sub module "dri2"
[ 2861.965] (II) LoadModule: "dri2"
[ 2861.965] (II) Module "dri2" already built-in
[ 2861.965] (==) Depth 24 pixmap format is 32 bpp
[ 2861.966] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2
[ 2861.967] (WW) vmware(0): Failed to initialize Gallium3D Xa. No render acceleration available.
[ 2861.967] (WW) vmware(0): Skipped initialization of direct rendering due to lack of render acceleration.
[ 2861.967] (--) vmware(0): Render acceleration is disabled.
[ 2861.967] (==) vmware(0): Rendercheck mode is disabled.
[ 2861.967] (--) vmware(0): Direct rendering (3D) is disabled.
[ 2861.967] (==) vmware(0): Backing store enabled
[ 2861.967] (==) vmware(0): Silken mouse enabled
[ 2861.967] (II) vmware(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2861.967] (==) vmware(0): DPMS enabled
[ 2861.967] (II) vmware(0): No 3D acceleration. Not setting up textured video.
[ 2861.967] (--) RandR disabled
[ 2861.981] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 2862.011] (II) vmware(0): Setting screen physical size to 338 x 203
[ 2862.235] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2862.235] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2862.235] (II) LoadModule: "evdev"
[ 2862.235] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2862.236] (II) Module evdev: vendor="X.Org Foundation"
[ 2862.236] compiled for 1.16.0, module version = 2.9.0
[ 2862.236] Module class: X.Org XInput Driver
[ 2862.236] ABI class: X.Org XInput driver, version 21.0
[ 2862.237] (EE) systemd-logind: failed to take device /dev/input/event1: Operation not permitted
[ 2862.237] (II) Using input driver 'evdev' for 'Power Button'
[ 2862.237] (**) Power Button: always reports core events
[ 2862.237] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 2862.237] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2862.237] (--) evdev: Power Button: Found keys
[ 2862.237] (II) evdev: Power Button: Configuring as keyboard
[ 2862.237] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event1"
[ 2862.237] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2862.237] (**) Option "xkb_rules" "evdev"
[ 2862.237] (**) Option "xkb_model" "pc104"
[ 2862.237] (**) Option "xkb_layout" "us"
[ 2862.284] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/event3)
[ 2862.284] (**) VMware VMware Virtual USB Mouse: Applying InputClass "evdev pointer catchall"
[ 2862.285] (EE) systemd-logind: failed to take device /dev/input/event3: Operation not permitted
[ 2862.285] (II) Using input driver 'evdev' for 'VMware VMware Virtual USB Mouse'
[ 2862.285] (**) VMware VMware Virtual USB Mouse: always reports core events
[ 2862.285] (**) evdev: VMware VMware Virtual USB Mouse: Device: "/dev/input/event3"
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Vendor 0xe0f Product 0x3
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found 12 mouse buttons
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found scroll wheel(s)
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found relative axes
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found x and y relative axes
[ 2862.285] (II) evdev: VMware VMware Virtual USB Mouse: Configuring as mouse
[ 2862.285] (II) evdev: VMware VMware Virtual USB Mouse: Adding scrollwheel support
[ 2862.285] (**) evdev: VMware VMware Virtual USB Mouse: YAxisMapping: buttons 4 and 5
[ 2862.285] (**) evdev: VMware VMware Virtual USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2862.285] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/0003:0E0F:0003.0001/input/input5/event3"
[ 2862.285] (II) XINPUT: Adding extended input device "VMware VMware Virtual USB Mouse" (type: MOUSE, id 7)
[ 2862.285] (II) evdev: VMware VMware Virtual USB Mouse: initialized for relative axes.
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) keeping acceleration scheme 1
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) acceleration profile 0
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) acceleration factor: 2.000
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) acceleration threshold: 4
[ 2862.286] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/mouse0)
[ 2862.286] (II) No input driver specified, ignoring this device.
[ 2862.286] (II) This device may have been added with another device file.
[ 2862.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2862.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2862.286] (EE) systemd-logind: failed to take device /dev/input/event0: Operation not permitted
[ 2862.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2862.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 2862.286] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2862.286] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2862.286] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2862.286] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2862.286] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2862.286] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 2862.286] (**) Option "xkb_rules" "evdev"
[ 2862.286] (**) Option "xkb_model" "pc104"
[ 2862.286] (**) Option "xkb_layout" "us"
[ 2862.287] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event4)
[ 2862.287] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 2862.287] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "vmmouse"
[ 2862.287] (II) LoadModule: "vmmouse"
[ 2862.287] (II) Loading /usr/lib/xorg/modules/input/vmmouse_drv.so
[ 2862.287] (II) Module vmmouse: vendor="X.Org Foundation"
[ 2862.287] compiled for 1.16.0, module version = 13.0.0
[ 2862.287] Module class: X.Org XInput Driver
[ 2862.287] ABI class: X.Org XInput driver, version 21.0
[ 2862.287] (II) VMWARE(0): VMMOUSE module was loaded
[ 2862.287] (II) Using input driver 'vmmouse' for 'ImPS/2 Generic Wheel Mouse'
[ 2862.287] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 2862.288] (II) VMWARE(0): vmmouse is available
[ 2862.288] (**) Option "Device" "/dev/input/event4"
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: ZAxisMapping: buttons 4 and 5
[ 2862.334] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 2862.334] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 9)
[ 2862.334] (II) VMWARE(0): VMMOUSE DEVICE_INIT
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 2862.334] (II) VMWARE(0): VMMOUSE DEVICE_ON
[ 2862.334] (II) VMWARE(0): vmmouse enabled
[ 2862.335] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 2862.335] (II) No input driver specified, ignoring this device.
[ 2862.335] (II) This device may have been added with another device file.
[ 2862.336] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 2862.336] (II) No input driver specified, ignoring this device.
[ 2862.336] (II) This device may have been added with another device file.
[ 2865.760] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE
[ 2865.883] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE
[ 2866.184] (II) VMWARE(0): VMMouseUnInit
[ 2866.184] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2866.184] (II) UnloadModule: "evdev"
[ 2866.184] (II) evdev: VMware VMware Virtual USB Mouse: Close
[ 2866.184] (II) UnloadModule: "evdev"
[ 2866.184] (II) evdev: Power Button: Close
[ 2866.184] (II) UnloadModule: "evdev"
[ 2866.219] (EE) Server terminated successfully (0). Closing log file.
[herminio@archlinux-vm ~]$
Offline
Read the last line of the log: there is nothing for X to start.
Also, why have you installed every possible driver?
Offline
I saw a tutorial that suggested running paceman -S xorg, that installed every driver. what am I missing?
Offline
Read the last line of the log: there is nothing for X to start.
Also, why have you installed every possible driver?
I love how you guys always provide little hints without giving the whole answer. Great way to teach. Annoying as hell, but great way to teach.
What he's saying is that:
[ 2866.219] (EE) Server terminated successfully (0)
Meaning your xorg is working, but you haven't installed a window manager or desktop environment for it to run.
https://wiki.archlinux.org/index.php/Ge … _interface
And also unless you plan on running this on a crazy amount of different video cards for some reason... You can probably uninstall the drivers you don't need.
Last edited by cyberpsych0sis (2014-11-16 04:31:13)
Offline
I got the impression that would at least get an xterm session. Here is the last part of my .xinitrc
twm &
xclock -geometry 50x50-1+1 &
xterm -geometry 80x50+494+51 &
xterm -geometry 80x20+494-0 &
exec xterm -geometry 80x66+0+0 -name login
Offline
Please read the wiki entry on xinitrc: yours is wrong on every count...
Offline
ok I copy the .xinitrc from the /skel directory
[herminio@archlinux-vm ~]$ cat .xinitrc
#!/bin/sh
#
# ~/.xinitrc
#
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
exec startx
# exec gnome-session
# exec startkde
# exec startxfce4
# ...or the Window Manager of your choice
exec xterm
[herminio@archlinux-vm ~]$
still failed and here is the log
[herminio@archlinux-vm ~]$ cat /var/log/Xorg.0.log
[ 5943.557]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 5943.557] X Protocol Version 11, Revision 0
[ 5943.557] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 5943.557] Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[ 5943.557] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 5943.557] Build Date: 10 November 2014 07:52:13PM
[ 5943.557]
[ 5943.557] Current version of pixman: 0.32.6
[ 5943.557] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 5943.557] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 5943.558] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 15 17:00:04 2014
[ 5943.558] (==) Using config file: "/etc/X11/xorg.conf"
[ 5943.558] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 5943.558] (==) ServerLayout "X.org Configured"
[ 5943.558] (**) |-->Screen "Screen0" (0)
[ 5943.558] (**) | |-->Monitor "Monitor0"
[ 5943.559] (**) | |-->Device "Card0"
[ 5943.559] (**) |-->Input Device "Mouse0"
[ 5943.559] (**) |-->Input Device "Keyboard0"
[ 5943.559] (==) Automatically adding devices
[ 5943.559] (==) Automatically enabling devices
[ 5943.559] (==) Automatically adding GPU devices
[ 5943.559] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 5943.559] Entry deleted from font path.
[ 5943.559] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 5943.559] Entry deleted from font path.
[ 5943.559] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 5943.559] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 5943.559] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 5943.559] (WW) Disabling Mouse0
[ 5943.559] (WW) Disabling Keyboard0
[ 5943.559] (II) Loader magic: 0x818d80
[ 5943.559] (II) Module ABI versions:
[ 5943.559] X.Org ANSI C Emulation: 0.4
[ 5943.559] X.Org Video Driver: 18.0
[ 5943.559] X.Org XInput driver : 21.0
[ 5943.559] X.Org Server Extension : 8.0
[ 5943.561] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c3
[ 5943.561] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 5943.562] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 5943.595] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
[ 5943.595] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 5943.595] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 5943.595] (II) LoadModule: "glx"
[ 5943.596] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5943.640] (II) Module glx: vendor="NVIDIA Corporation"
[ 5943.640] compiled for 4.0.2, module version = 1.0.0
[ 5943.640] Module class: X.Org Server Extension
[ 5943.640] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 5943.640] (II) LoadModule: "vmware"
[ 5943.641] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 5943.667] (II) Module vmware: vendor="X.Org Foundation"
[ 5943.667] compiled for 1.16.0, module version = 13.0.2
[ 5943.667] Module class: X.Org Video Driver
[ 5943.667] ABI class: X.Org Video Driver, version 18.0
[ 5943.667] (II) LoadModule: "vmware"
[ 5943.667] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 5943.667] (II) Module vmware: vendor="X.Org Foundation"
[ 5943.667] compiled for 1.16.0, module version = 13.0.2
[ 5943.667] Module class: X.Org Video Driver
[ 5943.667] ABI class: X.Org Video Driver, version 18.0
[ 5943.667] (II) UnloadModule: "vmware"
[ 5943.667] (II) Unloading vmware
[ 5943.667] (II) Failed to load module "vmware" (already loaded, 0)
[ 5943.667] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 5943.667] (++) using VT number 3
[ 5943.667] (--) controlling tty is VT number 3, auto-enabling KeepTty
[ 5943.668] (--) vmware(0): DRM driver version is 2.6.1
[ 5943.668] (==) vmware(0): Depth 24, (--) framebuffer bpp 32
[ 5943.668] (==) vmware(0): RGB weight 888
[ 5943.668] (==) vmware(0): Default visual is TrueColor
[ 5943.668] (--) vmware(0): Min width 1, Max Width 8192.
[ 5943.668] (--) vmware(0): Min height 1, Max Height 8192.
[ 5943.668] (II) vmware(0): Output Virtual1 using monitor section Monitor0
[ 5943.668] (II) vmware(0): Output Virtual2 has no monitor section
[ 5943.668] (II) vmware(0): Output Virtual3 has no monitor section
[ 5943.668] (II) vmware(0): Output Virtual4 has no monitor section
[ 5943.668] (II) vmware(0): Output Virtual5 has no monitor section
[ 5943.668] (II) vmware(0): Output Virtual6 has no monitor section
[ 5943.668] (II) vmware(0): Output Virtual7 has no monitor section
[ 5943.668] (II) vmware(0): Output Virtual8 has no monitor section
[ 5943.668] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 5943.668] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5943.668] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 5943.668] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 5943.668] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 5943.668] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 5943.668] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 5943.669] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 5943.669] (II) vmware(0): Printing probed modes for output Virtual1
[ 5943.669] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 5943.669] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 5943.669] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 5943.669] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 5943.669] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 5943.669] (II) vmware(0): EDID for output Virtual2
[ 5943.669] (II) vmware(0): EDID for output Virtual3
[ 5943.669] (II) vmware(0): EDID for output Virtual4
[ 5943.669] (II) vmware(0): EDID for output Virtual5
[ 5943.669] (II) vmware(0): EDID for output Virtual6
[ 5943.669] (II) vmware(0): EDID for output Virtual7
[ 5943.669] (II) vmware(0): EDID for output Virtual8
[ 5943.669] (II) vmware(0): Output Virtual1 connected
[ 5943.669] (II) vmware(0): Output Virtual2 disconnected
[ 5943.669] (II) vmware(0): Output Virtual3 disconnected
[ 5943.669] (II) vmware(0): Output Virtual4 disconnected
[ 5943.669] (II) vmware(0): Output Virtual5 disconnected
[ 5943.669] (II) vmware(0): Output Virtual6 disconnected
[ 5943.669] (II) vmware(0): Output Virtual7 disconnected
[ 5943.669] (II) vmware(0): Output Virtual8 disconnected
[ 5943.669] (II) vmware(0): Using exact sizes for initial modes
[ 5943.669] (II) vmware(0): Output Virtual1 using initial mode 1280x768
[ 5943.669] (II) vmware(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 5943.669] (==) vmware(0): DPI set to (96, 96)
[ 5943.669] (II) Loading sub module "fb"
[ 5943.669] (II) LoadModule: "fb"
[ 5943.669] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5943.670] (II) Module fb: vendor="X.Org Foundation"
[ 5943.670] compiled for 1.16.2, module version = 1.0.0
[ 5943.670] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5943.670] (II) Loading sub module "dri2"
[ 5943.670] (II) LoadModule: "dri2"
[ 5943.670] (II) Module "dri2" already built-in
[ 5943.670] (==) Depth 24 pixmap format is 32 bpp
[ 5943.670] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2
[ 5943.671] (WW) vmware(0): Failed to initialize Gallium3D Xa. No render acceleration available.
[ 5943.671] (WW) vmware(0): Skipped initialization of direct rendering due to lack of render acceleration.
[ 5943.671] (--) vmware(0): Render acceleration is disabled.
[ 5943.671] (==) vmware(0): Rendercheck mode is disabled.
[ 5943.671] (--) vmware(0): Direct rendering (3D) is disabled.
[ 5943.671] (==) vmware(0): Backing store enabled
[ 5943.671] (==) vmware(0): Silken mouse enabled
[ 5943.671] (II) vmware(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 5943.672] (==) vmware(0): DPMS enabled
[ 5943.672] (II) vmware(0): No 3D acceleration. Not setting up textured video.
[ 5943.672] (--) RandR disabled
[ 5943.678] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 5943.678] (EE)
Fatal server error:
[ 5943.678] (EE) failed to create screen resources(EE)
[ 5943.678] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 5943.678] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 5943.678] (EE)
[ 5943.678] (WW) vmware(0): drmDropMaster failed: Invalid argument
[ 5943.688] (EE) Server terminated with error (1). Closing log file.
Offline
FYI the "exec startx" line is removed and I still got the same error. I shoud not have left that in.
Offline
You didn't read the wiki page, did you?
There is a note, right near the top:
Note: Make sure to uncomment only one exec line, since that will be the last command run from the script; all the following lines will just be ignored. Do NOT attempt to background your WM by appending a `&` to the line.
Please make more of an effort to help yourself: the boards aren't for handholding and the wiki documentation for this sort of entry level configuration is comprehensive.
# edit: read the log...
Offline
I did catch that before you posted. I have been working on this for a few hours, so I would not surprised I made some mistakes. There issue is still the same. I am getting the same errors on the logs.
Last edited by rican-linux (2014-11-16 05:40:05)
Offline
I did catch that before you posted. I have been working on this for a few hours, so I would not surprised I made some mistakes. There issue is still the same. I am getting the same errors on the logs.
First time I installed arch it took me over 6 hours and 3 re-installs, but I had a great sense of pride once I figured it out. I still learn something new every time I install it. Stay with it, and you'll figure it out.
Offline
I'd start from scratch. Don't follow random tutorials on the web, just use the relevant wiki page.
Offline
ok for testing this is what I did
1. I removed my .xinitrc file
2. created a new xorg.conf file and placed it in the /etc/X11 directory
3. then I performed the test sudo X -config /etc/X11/xorg.conf
I got a blank screen so I killed the X session then tried to it with startx and got the same error. So I believe the xorg.conf file is good but I do not understand what is killing it when I try to use startx???
Last edited by rican-linux (2014-11-16 16:13:15)
Offline
ok I went through the xinitrc wiki again and noticed it said that I either can use either startx or 'xinit -- :1 -nolisten tcp vt$XDG_VTNR'. Since startx was not working so I tried the other option and low and behold xterm was up! My keyboard was not working but I am betting that is something in Xorg I need to look at. Making progress! Would any anyone know why one would work and not the other?
Offline
ok for testing this is what I did
1. I removed my .xinitrc file
2. created a new xorg.conf file and placed it in the /etc/X11 directory
3. then I performed the test sudo X -config /etc/X11/xorg.confI got a blank screen so I killed the X session then tried to it with startx and got the same error. So I believe the xorg.conf file is good but I do not understand what is killing it when I try to use startx???
This feels like a doctor trying to stop a patient from bleeding out while he simultaneously stabbing his patient with more holes to find the scalpel he left in there.
Jasons Advice is looking like the most expedient solution...
That being said, if you plan on reviving this puppy you'll need an .xinitrc file:
https://wiki.archlinux.org/index.php/xinitrc as it's used by xinit to start the xserver. Or to put it another way, it's used to startx, So RTFM. <3
*hint: use the skeleton.
Last edited by cyberpsych0sis (2014-11-16 16:49:33)
Offline
hey I already did that *see my post above yours* I xterm up now my keyboard is not working. I am seriously considering putting the puppy down and trying again.
Offline
Offline
I already installed those drivers.
[herminio@archlinux-vm ~]$ sudo pacman -Ss xf86-input-vmmouse
[sudo] password for herminio:
extra/xf86-input-vmmouse 13.0.0-5 (xorg-drivers xorg) [installed]
X.org VMWare Mouse input driver
[herminio@archlinux-vm ~]$ sudo pacman -Ss xf86-video-vmware
extra/xf86-video-vmware 13.0.2-2 (xorg-drivers xorg) [installed]
X.org vmware video driver
[herminio@archlinux-vm ~]$ sudo pacman -Ss svga-dri
extra/mesa-dri 10.3.3-1 [installed]
Mesa DRI drivers
[herminio@archlinux-vm ~]$
I am thinking it is time to start from scratch. The biggest lesson I am learning from this is don't be like the dad who just glances at the instructions to building his kid' s bike. I will keep you all posted.
Offline
I got a new installation of arch. I went through the wiki carefully. When I got to the part when I was to run startx I got a similar error.
[rican-linux@archlinux-vm ~]$ cat /var/log/Xorg.0.log
[ 6257.025]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 6257.035] X Protocol Version 11, Revision 0
[ 6257.036] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 6257.037] Current Operating System: Linux archlinux-vm 3.17.3-1-ARCH #1 SMP PREEMPT Fri Nov 14 23:13:48 CET 2014 x86_64
[ 6257.037] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 6257.040] Build Date: 10 November 2014 07:52:13PM
[ 6257.041]
[ 6257.042] Current version of pixman: 0.32.6
[ 6257.044] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 6257.044] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 6257.048] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov 17 06:52:34 2014
[ 6257.050] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 6257.050] (==) No Layout section. Using the first Screen section.
[ 6257.050] (**) |-->Screen "Screen0" (0)
[ 6257.050] (**) | |-->Monitor "Monitor0"
[ 6257.050] (**) | |-->Device "Device0"
[ 6257.050] (==) Automatically adding devices
[ 6257.050] (==) Automatically enabling devices
[ 6257.050] (==) Automatically adding GPU devices
[ 6257.050] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 6257.050] Entry deleted from font path.
[ 6257.050] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 6257.050] Entry deleted from font path.
[ 6257.050] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 6257.050] Entry deleted from font path.
[ 6257.050] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 6257.050] Entry deleted from font path.
[ 6257.050] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 6257.050] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 6257.050] Entry deleted from font path.
[ 6257.050] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 6257.050] (==) FontPath set to:
/usr/share/fonts/misc/
[ 6257.050] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 6257.050] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 6257.050] (II) Loader magic: 0x818d80
[ 6257.050] (II) Module ABI versions:
[ 6257.050] X.Org ANSI C Emulation: 0.4
[ 6257.051] X.Org Video Driver: 18.0
[ 6257.051] X.Org XInput driver : 21.0
[ 6257.051] X.Org Server Extension : 8.0
[ 6257.052] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 6257.053] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 6257.053] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 6257.093] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
[ 6257.093] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 6257.093] (II) LoadModule: "glx"
[ 6257.093] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 6257.097] (II) Module glx: vendor="X.Org Foundation"
[ 6257.097] compiled for 1.16.2, module version = 1.0.0
[ 6257.097] ABI class: X.Org Server Extension, version 8.0
[ 6257.097] (==) AIGLX enabled
[ 6257.097] (II) LoadModule: "vmware"
[ 6257.097] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 6257.127] (II) Module vmware: vendor="X.Org Foundation"
[ 6257.127] compiled for 1.16.0, module version = 13.0.2
[ 6257.127] Module class: X.Org Video Driver
[ 6257.127] ABI class: X.Org Video Driver, version 18.0
[ 6257.127] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 6257.127] (++) using VT number 1
[ 6257.127] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 6257.127] (--) vmware(0): DRM driver version is 2.6.1
[ 6257.127] (**) vmware(0): Depth 24, (--) framebuffer bpp 32
[ 6257.127] (==) vmware(0): RGB weight 888
[ 6257.127] (==) vmware(0): Default visual is TrueColor
[ 6257.127] (--) vmware(0): Min width 1, Max Width 8192.
[ 6257.127] (--) vmware(0): Min height 1, Max Height 8192.
[ 6257.127] (II) vmware(0): Output Virtual1 using monitor section Monitor0
[ 6257.127] (II) vmware(0): Output Virtual2 has no monitor section
[ 6257.127] (II) vmware(0): Output Virtual3 has no monitor section
[ 6257.127] (II) vmware(0): Output Virtual4 has no monitor section
[ 6257.127] (II) vmware(0): Output Virtual5 has no monitor section
[ 6257.128] (II) vmware(0): Output Virtual6 has no monitor section
[ 6257.128] (II) vmware(0): Output Virtual7 has no monitor section
[ 6257.128] (II) vmware(0): Output Virtual8 has no monitor section
[ 6257.128] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 6257.128] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 6257.128] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 6257.128] (II) vmware(0): Printing probed modes for output Virtual1
[ 6257.128] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz UeP)
[ 6257.128] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 6257.128] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 6257.128] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 6257.128] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 6257.128] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 6257.128] (II) vmware(0): EDID for output Virtual2
[ 6257.128] (II) vmware(0): EDID for output Virtual3
[ 6257.128] (II) vmware(0): EDID for output Virtual4
[ 6257.128] (II) vmware(0): EDID for output Virtual5
[ 6257.129] (II) vmware(0): EDID for output Virtual6
[ 6257.129] (II) vmware(0): EDID for output Virtual7
[ 6257.129] (II) vmware(0): EDID for output Virtual8
[ 6257.129] (II) vmware(0): Output Virtual1 connected
[ 6257.129] (II) vmware(0): Output Virtual2 disconnected
[ 6257.129] (II) vmware(0): Output Virtual3 disconnected
[ 6257.129] (II) vmware(0): Output Virtual4 disconnected
[ 6257.129] (II) vmware(0): Output Virtual5 disconnected
[ 6257.129] (II) vmware(0): Output Virtual6 disconnected
[ 6257.129] (II) vmware(0): Output Virtual7 disconnected
[ 6257.129] (II) vmware(0): Output Virtual8 disconnected
[ 6257.129] (II) vmware(0): Using user preference for initial modes
[ 6257.129] (II) vmware(0): Output Virtual1 using initial mode 1024x768
[ 6257.129] (II) vmware(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 6257.129] (==) vmware(0): DPI set to (96, 96)
[ 6257.129] (II) Loading sub module "fb"
[ 6257.129] (II) LoadModule: "fb"
[ 6257.129] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 6257.129] (II) Module fb: vendor="X.Org Foundation"
[ 6257.129] compiled for 1.16.2, module version = 1.0.0
[ 6257.129] ABI class: X.Org ANSI C Emulation, version 0.4
[ 6257.129] (II) Loading sub module "dri2"
[ 6257.129] (II) LoadModule: "dri2"
[ 6257.129] (II) Module "dri2" already built-in
[ 6257.129] (==) Depth 24 pixmap format is 32 bpp
[ 6257.130] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2
[ 6257.131] (WW) vmware(0): Failed to initialize Gallium3D Xa. No render acceleration available.
[ 6257.131] (WW) vmware(0): Skipped initialization of direct rendering due to lack of render acceleration.
[ 6257.131] (--) vmware(0): Render acceleration is disabled.
[ 6257.131] (==) vmware(0): Rendercheck mode is disabled.
[ 6257.131] (--) vmware(0): Direct rendering (3D) is disabled.
[ 6257.131] (==) vmware(0): Backing store enabled
[ 6257.131] (==) vmware(0): Silken mouse enabled
[ 6257.131] (II) vmware(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 6257.131] (==) vmware(0): DPMS enabled
[ 6257.131] (II) vmware(0): No 3D acceleration. Not setting up textured video.
[ 6257.131] (--) RandR disabled
[ 6257.137] (II) AIGLX: Screen 0 is not DRI2 capable
[ 6257.137] (EE) AIGLX: reverting to software rendering
[ 6257.144] (II) AIGLX: Loaded and initialized swrast
[ 6257.144] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 6257.144] (EE)
Fatal server error:
[ 6257.144] (EE) failed to create screen resources(EE)
[ 6257.144] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 6257.144] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 6257.144] (EE)
[ 6257.144] (WW) vmware(0): drmDropMaster failed: Invalid argument
[ 6257.155] (EE) Server terminated with error (1). Closing log file.
[rican-linux@archlinux-vm ~]$ sudo pacman -Ss xf86-input-evdev
extra/xf86-input-evdev 2.9.0-2 (xorg-drivers xorg) [installed]
X.org evdev input driver
however when I ran startx from an ssh terminal xterm loaded and all was working. Does anyone why this is?
Offline
Offline
I am reading through this thread right now.
Offline
I installed the xf86-video-vmware-git from the AUR and now I can startx from the vm terminal and all is working! This can be marked marked as solved. Thanks!
Last edited by rican-linux (2014-11-17 07:38:06)
Offline
Glad you got it sorted. You can mark your thread as [Solved] by editing your first post and prepending it to the title.
Offline
Pages: 1