You are not logged in.
- Topics: Active | Unanswered
#1 2014-12-13 01:33:02
- IjonTichy85
- Member
- From: Trier Germany
- Registered: 2014-12-13
- Posts: 2
Pulseaudio, No sound playing (s/pdif toslink)
Hi,
I'm trying to connect my audio receiver (JVC RX-6010RBK) via TOSLINK to my soundcard (VIA Technologies Inc. VT1720/24 [Envy24PT/HT]).
Pulseaudio is installed and seems to be working fine since the other soundcards (onboardsound + hdmi-sound) aren't causing any problems.
$pacmd list-cards
...
index: 3
name: <alsa_card.pci-0000_03_07.0>
driver: <module-alsa-card.c>
owner module: 9
properties:
alsa.card = "3"
alsa.card_name = "ICEnsemble ICE1724"
alsa.long_card_name = "ICEnsemble ICE1724 at 0xe800, irq 22"
alsa.driver_name = "snd_ice1724"
device.bus_path = "pci-0000:03:07.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card3"
device.bus = "pci"
device.vendor.id = "1412"
device.vendor.name = "VIA Technologies Inc."
device.product.id = "1724"
device.product.name = "VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller"
device.string = "3"
device.description = "VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
output:iec958-stereo: Digital Stereo (IEC958) Output (priority 5500, available: unknown)
output:iec958-stereo+input:analog-stereo: Digital Stereo (IEC958) Output + Analog Stereo Input (priority 5560, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:iec958-stereo>
sinks:
alsa_output.pci-0000_03_07.0.iec958-stereo/#1: VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller Digital Stereo (IEC958)
sources:
alsa_output.pci-0000_03_07.0.iec958-stereo.monitor/#2: Monitor of VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller Digital Stereo (IEC958)
ports:
analog-input-mic;input-microphone-1: Microphone / Microphone 1 (priority 8720, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic;input-microphone-2: Microphone / Microphone 2 (priority 8719, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: unknown)
properties:
analog-input-aux: Analog Input (priority 8000, latency offset 0 usec, available: unknown)
properties:
analog-input-video: Video (priority 7000, latency offset 0 usec, available: unknown)
properties:
analog-output;output-amplifier-on: Analog Output / Amplifier (priority 9910, latency offset 0 usec, available: unknown)
properties:
analog-output;output-amplifier-off: Analog Output / No Amplifier (priority 9900, latency offset 0 usec, available: unknown)
properties:
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:$pacmd list-sinks
...
index: 7
name: <alsa_output.pci-0000_03_07.0.iec958-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9058
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 10
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 682.67 ms
card: 3 <alsa_card.pci-0000_03_07.0>
module: 9
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ICE1724 IEC958"
alsa.id = "ICE1724 IEC958"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "1"
alsa.card = "3"
alsa.card_name = "ICEnsemble ICE1724"
alsa.long_card_name = "ICEnsemble ICE1724 at 0xe800, irq 22"
alsa.driver_name = "snd_ice1724"
device.bus_path = "pci-0000:03:07.0"
sysfs.path = "/devices/pci0000:00/0000:00:14.4/0000:03:07.0/sound/card3"
device.bus = "pci"
device.vendor.id = "1412"
device.vendor.name = "VIA Technologies Inc."
device.product.id = "1724"
device.product.name = "VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller"
device.string = "iec958:3"
device.buffering.buffer_size = "131072"
device.buffering.fragment_size = "65536"
device.access_mode = "mmap+timer"
device.profile.name = "iec958-stereo"
device.profile.description = "Digital Stereo (IEC958)"
device.description = "VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller Digital Stereo (IEC958)"
alsa.mixer_name = "VIA Technologies id 83"
alsa.components = "AC97a:56494183"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
iec958-stereo-output: Digital Output (S/PDIF) (priority 0, latency offset 0 usec, available: unknown)
properties:
active port: <iec958-stereo-output>seems fine to me. KDE shows the sound card just as expected.
I've checked alsamixer to make sure nothing is muted.
When I play a video with vlc "VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller Digital Stereo (IEC958)" is available and there are no errors while playing. The output of $pacmd list-sinks even changes from "state: SUSPENDED" to "state: RUNNING".
Everything seems fine except one thing: I don't hear any sound.
Right now I don't know where else to look. Maybe someone here has another idea?
Last edited by IjonTichy85 (2014-12-13 03:15:33)
If you have any answers, We will be glad to provide full and detailed questions.
Offline