You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2014-12-14 21:34:36
- whitetimer
- Member
- Registered: 2010-05-23
- Posts: 207
Xorg wont boot with nvidia
Hi All
I have an Asus N550JV with GT750 4GB Graphics card, but i'm unable to boot into xorg when I have 20-nvidia.conf. This is the error log
[ 126.911]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 126.911]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 126.911] X Protocol Version 11, Revision 0
[ 126.911] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 126.911] Current Operating System: Linux Julian-Notebook 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 126.911] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d1dd653c-60f3-48b5-acb1-e423ccd175df rw rcutree.rcu_idle_gp_delay=1
[ 126.911] Build Date: 10 December 2014 02:34:24PM
[ 126.911]
[ 126.911] Current version of pixman: 0.32.6
[ 126.911] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 126.911] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 126.911] (==) Log file: "/home/julian/.local/share/xorg/Xorg.0.log", Time: Mon Dec 15 18:28:01 2014
[ 126.911] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 126.911] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 126.911] (==) ServerLayout "ServerLayout0"
[ 126.911] (==) No screen section available. Using defaults.
[ 126.911] (**) |-->Screen "Default Screen Section" (0)
[ 126.911] (**) | |-->Monitor "<default monitor>"
[ 126.911] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 126.911] (**) | |-->Device "Intel Graphics"
[ 126.911] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 126.911] (**) Option "BlankTime" "0"
[ 126.911] (**) Option "StandbyTime" "0"
[ 126.911] (**) Option "SuspendTime" "0"
[ 126.911] (**) Option "OffTime" "0"
[ 126.911] (==) Automatically adding devices
[ 126.911] (==) Automatically enabling devices
[ 126.911] (==) Automatically adding GPU devices
[ 126.911] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 126.911] Entry deleted from font path.
[ 126.911] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 126.911] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 126.911] Entry deleted from font path.
[ 126.911] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 126.911] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 126.911] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 126.911] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 126.911] (II) Loader magic: 0x818d80
[ 126.911] (II) Module ABI versions:
[ 126.911] X.Org ANSI C Emulation: 0.4
[ 126.911] X.Org Video Driver: 18.0
[ 126.911] X.Org XInput driver : 21.0
[ 126.911] X.Org Server Extension : 8.0
[ 126.913] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c5
[ 126.913] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 126.913] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 126.914] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 126.914] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 126.914] (II) LoadModule: "glx"
[ 126.914] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 126.915] (II) Module glx: vendor="X.Org Foundation"
[ 126.915] compiled for 1.16.2.901, module version = 1.0.0
[ 126.915] ABI class: X.Org Server Extension, version 8.0
[ 126.915] (==) AIGLX enabled
[ 126.915] (II) LoadModule: "intel"
[ 126.915] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 126.987] (II) Module intel: vendor="X.Org Foundation"
[ 126.987] compiled for 1.16.1, module version = 2.99.916
[ 126.987] Module class: X.Org Video Driver
[ 126.987] ABI class: X.Org Video Driver, version 18.0
[ 126.987] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 126.987] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 126.987] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 126.987] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 126.987] (++) using VT number 1
[ 126.987] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 126.987] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 126.989] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 126.989] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 126.989] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 126.989] (==) intel(0): RGB weight 888
[ 126.989] (==) intel(0): Default visual is TrueColor
[ 126.989] (**) intel(0): Option "AccelMethod" "uxa"
[ 126.989] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 126.989] (**) intel(0): Relaxed fencing enabled
[ 126.989] (**) intel(0): Wait on SwapBuffers? enabled
[ 126.989] (**) intel(0): Triple buffering? enabled
[ 126.989] (**) intel(0): Framebuffer tiled
[ 126.989] (**) intel(0): Pixmaps tiled
[ 126.989] (**) intel(0): 3D buffers tiled
[ 126.989] (**) intel(0): SwapBuffers wait enabled
[ 126.989] (==) intel(0): video overlay key set to 0x101fe
[ 126.989] (II) intel(0): Output eDP1 has no monitor section
[ 126.990] (--) intel(0): found backlight control interface intel_backlight
[ 127.016] (II) intel(0): Output VGA1 has no monitor section
[ 127.016] (II) intel(0): Output DP1 has no monitor section
[ 127.017] (II) intel(0): Output HDMI1 has no monitor section
[ 127.017] (II) intel(0): Output HDMI2 has no monitor section
[ 127.018] (II) intel(0): EDID for output eDP1
[ 127.018] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 127.018] (II) intel(0): Year: 2012 Week: 0
[ 127.018] (II) intel(0): EDID Version: 1.4
[ 127.018] (II) intel(0): Digital Display Input
[ 127.018] (II) intel(0): 6 bits per channel
[ 127.018] (II) intel(0): Digital interface is DisplayPort
[ 127.018] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 127.018] (II) intel(0): Gamma: 2.20
[ 127.018] (II) intel(0): No DPMS capabilities specified
[ 127.018] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 127.018] (II) intel(0): First detailed timing is preferred mode
[ 127.018] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 127.018] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 127.018] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 127.018] (II) intel(0): Manufacturer's mask: 0
[ 127.018] (II) intel(0): Supported detailed timing:
[ 127.018] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 127.018] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 127.018] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 127.018] (II) intel(0): LG Display
[ 127.018] (II) intel(0): LP156WF4-SPB1
[ 127.018] (II) intel(0): EDID (in hex):
[ 127.018] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 127.018] (II) intel(0): 00160104952313780a25b5a159599d27
[ 127.018] (II) intel(0): 1c505400000001010101010101010101
[ 127.018] (II) intel(0): 010101010101e83580a8703816402024
[ 127.018] (II) intel(0): 550059c2100000180000000000000000
[ 127.018] (II) intel(0): 00000000000000000000000000fe004c
[ 127.018] (II) intel(0): 4720446973706c61790a2020000000fe
[ 127.018] (II) intel(0): 004c503135365746342d535042310069
[ 127.018] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 127.018] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 127.018] (II) intel(0): Printing probed modes for output eDP1
[ 127.018] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 127.018] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 127.018] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 127.018] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 127.018] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 127.018] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 127.018] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 127.018] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 127.043] (II) intel(0): EDID for output VGA1
[ 127.043] (II) intel(0): EDID for output DP1
[ 127.043] (II) intel(0): EDID for output HDMI1
[ 127.044] (II) intel(0): EDID for output HDMI2
[ 127.044] (II) intel(0): Output eDP1 connected
[ 127.044] (II) intel(0): Output VGA1 disconnected
[ 127.044] (II) intel(0): Output DP1 disconnected
[ 127.044] (II) intel(0): Output HDMI1 disconnected
[ 127.044] (II) intel(0): Output HDMI2 disconnected
[ 127.044] (II) intel(0): Using exact sizes for initial modes
[ 127.044] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 127.044] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 127.044] (II) intel(0): Kernel page flipping support detected, enabling
[ 127.044] (==) intel(0): DPI set to (96, 96)
[ 127.044] (II) Loading sub module "fb"
[ 127.044] (II) LoadModule: "fb"
[ 127.044] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 127.050] (II) Module fb: vendor="X.Org Foundation"
[ 127.050] compiled for 1.16.2.901, module version = 1.0.0
[ 127.050] ABI class: X.Org ANSI C Emulation, version 0.4
[ 127.050] (II) Loading sub module "dri2"
[ 127.050] (II) LoadModule: "dri2"
[ 127.050] (II) Module "dri2" already built-in
[ 127.050] (==) Depth 24 pixmap format is 32 bpp
[ 127.050] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
[ 127.067] (II) UXA(0): Driver registered support for the following operations:
[ 127.067] (II) solid
[ 127.067] (II) copy
[ 127.067] (II) composite (RENDER acceleration)
[ 127.067] (II) put_image
[ 127.067] (II) get_image
[ 127.067] (II) intel(0): [DRI2] Setup complete
[ 127.067] (II) intel(0): [DRI2] DRI driver: i965
[ 127.067] (II) intel(0): [DRI2] VDPAU driver: i965
[ 127.067] (==) intel(0): Backing store enabled
[ 127.067] (==) intel(0): Silken mouse enabled
[ 127.067] (II) intel(0): Initializing HW Cursor
[ 127.067] (II) intel(0): Use legacy UXA acceleration.
[ 127.067] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 127.068] (==) intel(0): DPMS enabled
[ 127.068] (==) intel(0): Intel XvMC decoder enabled
[ 127.068] (II) intel(0): Set up textured video
[ 127.068] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 127.068] (II) intel(0): DRI2: Enabled
[ 127.068] (II) intel(0): DRI3: Not available
[ 127.068] (==) intel(0): hotplug detection: "enabled"
[ 127.080] (--) RandR disabled
[ 127.218] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 127.218] (II) AIGLX: enabled GLX_ARB_create_context
[ 127.218] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 127.218] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 127.218] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 127.218] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 127.218] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 127.218] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 127.218] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 127.218] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 127.218] (II) AIGLX: Loaded and initialized i965
[ 127.218] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 127.218] (II) intel(0): Setting screen physical size to 508 x 285
[ 127.474] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 127.474] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 127.474] (II) LoadModule: "evdev"
[ 127.474] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 127.498] (II) Module evdev: vendor="X.Org Foundation"
[ 127.498] compiled for 1.16.2, module version = 2.9.1
[ 127.498] Module class: X.Org XInput Driver
[ 127.498] ABI class: X.Org XInput driver, version 21.0
[ 127.498] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 11 paused 0
[ 127.498] (II) Using input driver 'evdev' for 'Power Button'
[ 127.498] (**) Power Button: always reports core events
[ 127.498] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 127.498] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 127.498] (--) evdev: Power Button: Found keys
[ 127.498] (II) evdev: Power Button: Configuring as keyboard
[ 127.498] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[ 127.498] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 127.498] (**) Option "xkb_rules" "evdev"
[ 127.498] (**) Option "xkb_model" "pc104"
[ 127.498] (**) Option "xkb_layout" "us"
[ 127.511] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 127.511] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 127.511] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 12 paused 0
[ 127.511] (II) Using input driver 'evdev' for 'Video Bus'
[ 127.511] (**) Video Bus: always reports core events
[ 127.511] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 127.511] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 127.511] (--) evdev: Video Bus: Found keys
[ 127.511] (II) evdev: Video Bus: Configuring as keyboard
[ 127.511] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input19/event10"
[ 127.511] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 127.511] (**) Option "xkb_rules" "evdev"
[ 127.511] (**) Option "xkb_model" "pc104"
[ 127.511] (**) Option "xkb_layout" "us"
[ 127.512] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 127.512] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 127.512] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 13 paused 0
[ 127.512] (II) Using input driver 'evdev' for 'Video Bus'
[ 127.512] (**) Video Bus: always reports core events
[ 127.512] (**) evdev: Video Bus: Device: "/dev/input/event6"
[ 127.512] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 127.512] (--) evdev: Video Bus: Found keys
[ 127.512] (II) evdev: Video Bus: Configuring as keyboard
[ 127.512] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:64/LNXVIDEO:00/input/input18/event6"
[ 127.512] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 127.512] (**) Option "xkb_rules" "evdev"
[ 127.512] (**) Option "xkb_model" "pc104"
[ 127.512] (**) Option "xkb_layout" "us"
[ 127.512] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 127.512] (II) No input driver specified, ignoring this device.
[ 127.512] (II) This device may have been added with another device file.
[ 127.512] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 127.512] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 127.513] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 14 paused 0
[ 127.513] (II) Using input driver 'evdev' for 'Sleep Button'
[ 127.513] (**) Sleep Button: always reports core events
[ 127.513] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 127.513] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 127.513] (--) evdev: Sleep Button: Found keys
[ 127.513] (II) evdev: Sleep Button: Configuring as keyboard
[ 127.513] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 127.513] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 127.513] (**) Option "xkb_rules" "evdev"
[ 127.513] (**) Option "xkb_model" "pc104"
[ 127.513] (**) Option "xkb_layout" "us"
[ 127.513] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event13)
[ 127.513] (II) No input driver specified, ignoring this device.
[ 127.513] (II) This device may have been added with another device file.
[ 127.513] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event14)
[ 127.513] (II) No input driver specified, ignoring this device.
[ 127.513] (II) This device may have been added with another device file.
[ 127.513] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event15)
[ 127.514] (II) No input driver specified, ignoring this device.
[ 127.514] (II) This device may have been added with another device file.
[ 127.514] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 127.514] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 127.514] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 15 paused 0
[ 127.514] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 127.514] (**) USB OPTICAL MOUSE: always reports core events
[ 127.514] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 127.514] (--) evdev: USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4c
[ 127.514] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
[ 127.514] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 127.514] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 127.514] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 127.514] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 127.514] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 127.514] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 127.514] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 127.514] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0001/input/input5/event1"
[ 127.514] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 10)
[ 127.514] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 127.514] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 127.514] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 127.514] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 127.514] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 127.514] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 127.514] (II) No input driver specified, ignoring this device.
[ 127.514] (II) This device may have been added with another device file.
[ 127.515] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event16)
[ 127.515] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 127.515] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 16 paused 0
[ 127.515] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 127.515] (**) ELAN Touchscreen: always reports core events
[ 127.515] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event16"
[ 127.515] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x10c
[ 127.515] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 127.515] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 127.515] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 127.515] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 127.515] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 127.515] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 127.515] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 127.515] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 127.515] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.0032/input/input117/event16"
[ 127.515] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 11)
[ 127.515] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 127.515] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 127.515] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 127.515] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 127.515] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 127.515] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 127.515] (II) No input driver specified, ignoring this device.
[ 127.515] (II) This device may have been added with another device file.
[ 127.516] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event7)
[ 127.516] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[ 127.516] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 17 paused 0
[ 127.516] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[ 127.516] (**) USB2.0 UVC HD Webcam: always reports core events
[ 127.516] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event7"
[ 127.516] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x13d3 Product 0x5188
[ 127.516] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[ 127.516] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[ 127.516] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input16/event7"
[ 127.516] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 12)
[ 127.516] (**) Option "xkb_rules" "evdev"
[ 127.516] (**) Option "xkb_model" "pc104"
[ 127.516] (**) Option "xkb_layout" "us"
[ 127.516] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 127.516] (II) No input driver specified, ignoring this device.
[ 127.516] (II) This device may have been added with another device file.
[ 127.516] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 127.517] (II) No input driver specified, ignoring this device.
[ 127.517] (II) This device may have been added with another device file.
[ 127.517] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event8)
[ 127.517] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 127.517] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 18 paused 0
[ 127.517] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 127.517] (**) Asus WMI hotkeys: always reports core events
[ 127.517] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event8"
[ 127.517] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 127.517] (--) evdev: Asus WMI hotkeys: Found keys
[ 127.517] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 127.517] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input17/event8"
[ 127.517] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 127.517] (**) Option "xkb_rules" "evdev"
[ 127.517] (**) Option "xkb_model" "pc104"
[ 127.517] (**) Option "xkb_layout" "us"
[ 127.518] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 127.518] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 127.518] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 19 paused 0
[ 127.518] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 127.518] (**) AT Translated Set 2 keyboard: always reports core events
[ 127.518] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 127.518] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 127.518] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 127.518] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 127.518] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 127.518] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 127.518] (**) Option "xkb_rules" "evdev"
[ 127.518] (**) Option "xkb_model" "pc104"
[ 127.518] (**) Option "xkb_layout" "us"
[ 127.518] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 127.518] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 127.519] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 20 paused 0
[ 127.519] (II) Using input driver 'evdev' for 'ETPS/2 Elantech Touchpad'
[ 127.519] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 127.519] (**) evdev: ETPS/2 Elantech Touchpad: Device: "/dev/input/event9"
[ 127.519] (--) evdev: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 127.519] (--) evdev: ETPS/2 Elantech Touchpad: Found 1 mouse buttons
[ 127.519] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute axes
[ 127.519] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute multitouch axes
[ 127.519] (--) evdev: ETPS/2 Elantech Touchpad: Found x and y absolute axes
[ 127.519] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute touchpad.
[ 127.519] (II) evdev: ETPS/2 Elantech Touchpad: Configuring as touchpad
[ 127.519] (**) evdev: ETPS/2 Elantech Touchpad: YAxisMapping: buttons 4 and 5
[ 127.519] (**) evdev: ETPS/2 Elantech Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 127.519] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event9"
[ 127.519] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 127.519] (II) evdev: ETPS/2 Elantech Touchpad: initialized for absolute axes.
[ 127.519] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 127.519] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
[ 127.519] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 127.519] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 127.519] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse2)
[ 127.519] (II) No input driver specified, ignoring this device.
[ 127.519] (II) This device may have been added with another device file.
[ 127.519] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 127.519] (II) No input driver specified, ignoring this device.
[ 127.519] (II) This device may have been added with another device file.This is the 20-nvidia.conf file
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 343.36 (buildmeister@swio-display-x86-rhel47-09) Mon Dec 1 16:46:59 PST 2014
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "type1"
Load "freetype"
Load "glx"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GT 750M"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
DefaultDepth 24
Option "UseDisplayDevice" "none"
SubSection "Display"
Virtual 640 480
Depth 24
EndSubSection
EndSectionAny suggestions ?
Cheers
Offline
#2 2014-12-14 22:03:54
- fukawi2
- Ex-Administratorino
- From: .vic.au
- Registered: 2007-09-28
- Posts: 6,237
- Website
Re: Xorg wont boot with nvidia
whitetimer wrote:
but i'm unable to boot into xorg when I have 20-nvidia.conf.
What does "unable to boot" mean exactly? There's no Error results in the log file you shared.
whitetimer wrote:
Any suggestions ?
Have you tried without 20-nvidia.conf? It may not be needed: https://wiki.archlinux.org/index.php/Nvidia#Configuring
Are you familiar with our Forum Rules, and How To Ask Questions The Smart Way?
BlueHackers // fscanary // resticctl
Offline
#3 2014-12-15 02:38:14
- whitetimer
- Member
- Registered: 2010-05-23
- Posts: 207
Re: Xorg wont boot with nvidia
If I use the 20-nvidia.conf file above, when I try to logon from command prompt I just get an error report and this log message
[ 1626.721]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 1626.721]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 1626.721] X Protocol Version 11, Revision 0
[ 1626.721] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 1626.721] Current Operating System: Linux Julian-Notebook 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 1626.721] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d1dd653c-60f3-48b5-acb1-e423ccd175df rw rcutree.rcu_idle_gp_delay=1
[ 1626.721] Build Date: 10 December 2014 02:34:24PM
[ 1626.721]
[ 1626.721] Current version of pixman: 0.32.6
[ 1626.721] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1626.721] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1626.721] (==) Log file: "/home/julian/.local/share/xorg/Xorg.1.log", Time: Mon Dec 15 23:28:42 2014
[ 1626.721] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1626.721] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1626.721] (==) ServerLayout "ServerLayout0"
[ 1626.721] (==) No screen section available. Using defaults.
[ 1626.721] (**) |-->Screen "Default Screen Section" (0)
[ 1626.721] (**) | |-->Monitor "<default monitor>"
[ 1626.721] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1626.721] (**) | |-->Device "Intel Graphics"
[ 1626.721] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1626.721] (**) Option "BlankTime" "0"
[ 1626.721] (**) Option "StandbyTime" "0"
[ 1626.721] (**) Option "SuspendTime" "0"
[ 1626.721] (**) Option "OffTime" "0"
[ 1626.721] (==) Automatically adding devices
[ 1626.721] (==) Automatically enabling devices
[ 1626.721] (==) Automatically adding GPU devices
[ 1626.721] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1626.721] Entry deleted from font path.
[ 1626.721] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1626.721] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1626.721] Entry deleted from font path.
[ 1626.721] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1626.721] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 1626.721] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1626.721] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1626.721] (II) Loader magic: 0x818d80
[ 1626.721] (II) Module ABI versions:
[ 1626.721] X.Org ANSI C Emulation: 0.4
[ 1626.721] X.Org Video Driver: 18.0
[ 1626.721] X.Org XInput driver : 21.0
[ 1626.721] X.Org Server Extension : 8.0
[ 1626.722] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c5
[ 1626.722] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1626.723] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 1626.723] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 1626.723] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1626.723] (II) LoadModule: "glx"
[ 1626.724] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1626.724] (II) Module glx: vendor="X.Org Foundation"
[ 1626.724] compiled for 1.16.2.901, module version = 1.0.0
[ 1626.724] ABI class: X.Org Server Extension, version 8.0
[ 1626.724] (==) AIGLX enabled
[ 1626.724] (II) LoadModule: "intel"
[ 1626.724] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1626.724] (II) Module intel: vendor="X.Org Foundation"
[ 1626.724] compiled for 1.16.1, module version = 2.99.916
[ 1626.724] Module class: X.Org Video Driver
[ 1626.724] ABI class: X.Org Video Driver, version 18.0
[ 1626.724] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1626.725] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[ 1626.725] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[ 1626.725] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[ 1626.725] (++) using VT number 1
[ 1626.725] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 1626.725] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 1626.725] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 1626.725] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1626.725] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1626.725] (==) intel(0): RGB weight 888
[ 1626.725] (==) intel(0): Default visual is TrueColor
[ 1626.725] (**) intel(0): Option "AccelMethod" "uxa"
[ 1626.725] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4600
[ 1626.725] (**) intel(0): Relaxed fencing enabled
[ 1626.725] (**) intel(0): Wait on SwapBuffers? enabled
[ 1626.725] (**) intel(0): Triple buffering? enabled
[ 1626.725] (**) intel(0): Framebuffer tiled
[ 1626.725] (**) intel(0): Pixmaps tiled
[ 1626.725] (**) intel(0): 3D buffers tiled
[ 1626.725] (**) intel(0): SwapBuffers wait enabled
[ 1626.725] (==) intel(0): video overlay key set to 0x101fe
[ 1626.726] (II) intel(0): Output eDP1 has no monitor section
[ 1626.726] (--) intel(0): found backlight control interface intel_backlight
[ 1626.749] (II) intel(0): Output VGA1 has no monitor section
[ 1626.749] (II) intel(0): Output DP1 has no monitor section
[ 1626.750] (II) intel(0): Output HDMI1 has no monitor section
[ 1626.750] (II) intel(0): Output HDMI2 has no monitor section
[ 1626.751] (II) intel(0): EDID for output eDP1
[ 1626.751] (II) intel(0): Manufacturer: LGD Model: 323 Serial#: 0
[ 1626.751] (II) intel(0): Year: 2012 Week: 0
[ 1626.751] (II) intel(0): EDID Version: 1.4
[ 1626.751] (II) intel(0): Digital Display Input
[ 1626.751] (II) intel(0): 6 bits per channel
[ 1626.751] (II) intel(0): Digital interface is DisplayPort
[ 1626.751] (II) intel(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 1626.751] (II) intel(0): Gamma: 2.20
[ 1626.751] (II) intel(0): No DPMS capabilities specified
[ 1626.751] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1626.751] (II) intel(0): First detailed timing is preferred mode
[ 1626.751] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 1626.751] (II) intel(0): redX: 0.629 redY: 0.350 greenX: 0.349 greenY: 0.614
[ 1626.751] (II) intel(0): blueX: 0.154 blueY: 0.112 whiteX: 0.313 whiteY: 0.329
[ 1626.751] (II) intel(0): Manufacturer's mask: 0
[ 1626.751] (II) intel(0): Supported detailed timing:
[ 1626.751] (II) intel(0): clock: 138.0 MHz Image Size: 345 x 194 mm
[ 1626.751] (II) intel(0): h_active: 1920 h_sync: 1952 h_sync_end 1988 h_blank_end 2088 h_border: 0
[ 1626.751] (II) intel(0): v_active: 1080 v_sync: 1085 v_sync_end 1090 v_blanking: 1102 v_border: 0
[ 1626.751] (II) intel(0): LG Display
[ 1626.751] (II) intel(0): LP156WF4-SPB1
[ 1626.751] (II) intel(0): EDID (in hex):
[ 1626.751] (II) intel(0): 00ffffffffffff0030e4230300000000
[ 1626.751] (II) intel(0): 00160104952313780a25b5a159599d27
[ 1626.751] (II) intel(0): 1c505400000001010101010101010101
[ 1626.751] (II) intel(0): 010101010101e83580a8703816402024
[ 1626.751] (II) intel(0): 550059c2100000180000000000000000
[ 1626.751] (II) intel(0): 00000000000000000000000000fe004c
[ 1626.751] (II) intel(0): 4720446973706c61790a2020000000fe
[ 1626.751] (II) intel(0): 004c503135365746342d535042310069
[ 1626.751] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1626.751] (II) intel(0): Printing probed modes for output eDP1
[ 1626.751] (II) intel(0): Modeline "1920x1080"x60.0 138.00 1920 1952 1988 2088 1080 1085 1090 1102 -hsync -vsync (66.1 kHz eP)
[ 1626.751] (II) intel(0): Modeline "1400x1050"x60.0 122.00 1400 1488 1640 1880 1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[ 1626.751] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[ 1626.751] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz d)
[ 1626.751] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 1626.751] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 1626.751] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 1626.751] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 1626.776] (II) intel(0): EDID for output VGA1
[ 1626.776] (II) intel(0): EDID for output DP1
[ 1626.776] (II) intel(0): EDID for output HDMI1
[ 1626.777] (II) intel(0): EDID for output HDMI2
[ 1626.777] (II) intel(0): Output eDP1 connected
[ 1626.777] (II) intel(0): Output VGA1 disconnected
[ 1626.777] (II) intel(0): Output DP1 disconnected
[ 1626.777] (II) intel(0): Output HDMI1 disconnected
[ 1626.777] (II) intel(0): Output HDMI2 disconnected
[ 1626.777] (II) intel(0): Using exact sizes for initial modes
[ 1626.777] (II) intel(0): Output eDP1 using initial mode 1920x1080
[ 1626.777] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1626.777] (II) intel(0): Kernel page flipping support detected, enabling
[ 1626.777] (==) intel(0): DPI set to (96, 96)
[ 1626.777] (II) Loading sub module "fb"
[ 1626.777] (II) LoadModule: "fb"
[ 1626.777] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1626.777] (II) Module fb: vendor="X.Org Foundation"
[ 1626.777] compiled for 1.16.2.901, module version = 1.0.0
[ 1626.777] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1626.777] (II) Loading sub module "dri2"
[ 1626.777] (II) LoadModule: "dri2"
[ 1626.777] (II) Module "dri2" already built-in
[ 1626.777] (==) Depth 24 pixmap format is 32 bpp
[ 1626.777] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, untiled
[ 1626.778] (II) UXA(0): Driver registered support for the following operations:
[ 1626.778] (II) solid
[ 1626.778] (II) copy
[ 1626.778] (II) composite (RENDER acceleration)
[ 1626.778] (II) put_image
[ 1626.778] (II) get_image
[ 1626.778] (II) intel(0): [DRI2] Setup complete
[ 1626.778] (II) intel(0): [DRI2] DRI driver: i965
[ 1626.778] (II) intel(0): [DRI2] VDPAU driver: i965
[ 1626.778] (==) intel(0): Backing store enabled
[ 1626.778] (==) intel(0): Silken mouse enabled
[ 1626.778] (II) intel(0): Initializing HW Cursor
[ 1626.778] (II) intel(0): Use legacy UXA acceleration.
[ 1626.778] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1626.778] (==) intel(0): DPMS enabled
[ 1626.778] (==) intel(0): Intel XvMC decoder enabled
[ 1626.778] (II) intel(0): Set up textured video
[ 1626.778] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1626.778] (II) intel(0): DRI2: Enabled
[ 1626.778] (II) intel(0): DRI3: Not available
[ 1626.778] (==) intel(0): hotplug detection: "enabled"
[ 1626.796] (--) RandR disabled
[ 1626.815] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 1626.815] (II) AIGLX: enabled GLX_ARB_create_context
[ 1626.815] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 1626.815] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 1626.815] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 1626.815] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 1626.815] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 1626.815] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 1626.815] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 1626.815] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 1626.815] (II) AIGLX: Loaded and initialized i965
[ 1626.815] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1626.815] (II) intel(0): Setting screen physical size to 508 x 285
[ 1626.839] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 1626.839] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1626.839] (II) LoadModule: "evdev"
[ 1626.839] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1626.839] (II) Module evdev: vendor="X.Org Foundation"
[ 1626.839] compiled for 1.16.2, module version = 2.9.1
[ 1626.839] Module class: X.Org XInput Driver
[ 1626.839] ABI class: X.Org XInput driver, version 21.0
[ 1626.839] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 11 paused 0
[ 1626.840] (II) Using input driver 'evdev' for 'Power Button'
[ 1626.840] (**) Power Button: always reports core events
[ 1626.840] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 1626.840] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 1626.840] (--) evdev: Power Button: Found keys
[ 1626.840] (II) evdev: Power Button: Configuring as keyboard
[ 1626.840] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input8/event4"
[ 1626.840] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 1626.840] (**) Option "xkb_rules" "evdev"
[ 1626.840] (**) Option "xkb_model" "pc104"
[ 1626.840] (**) Option "xkb_layout" "us"
[ 1626.856] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 1626.856] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1626.856] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 12 paused 0
[ 1626.856] (II) Using input driver 'evdev' for 'Video Bus'
[ 1626.856] (**) Video Bus: always reports core events
[ 1626.856] (**) evdev: Video Bus: Device: "/dev/input/event11"
[ 1626.856] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1626.856] (--) evdev: Video Bus: Found keys
[ 1626.856] (II) evdev: Video Bus: Configuring as keyboard
[ 1626.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input19/event11"
[ 1626.856] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 1626.856] (**) Option "xkb_rules" "evdev"
[ 1626.856] (**) Option "xkb_model" "pc104"
[ 1626.856] (**) Option "xkb_layout" "us"
[ 1626.856] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[ 1626.856] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1626.857] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 13 paused 0
[ 1626.857] (II) Using input driver 'evdev' for 'Video Bus'
[ 1626.857] (**) Video Bus: always reports core events
[ 1626.857] (**) evdev: Video Bus: Device: "/dev/input/event10"
[ 1626.857] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 1626.857] (--) evdev: Video Bus: Found keys
[ 1626.857] (II) evdev: Video Bus: Configuring as keyboard
[ 1626.857] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:64/LNXVIDEO:00/input/input18/event10"
[ 1626.857] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 1626.857] (**) Option "xkb_rules" "evdev"
[ 1626.857] (**) Option "xkb_model" "pc104"
[ 1626.857] (**) Option "xkb_layout" "us"
[ 1626.857] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 1626.857] (II) No input driver specified, ignoring this device.
[ 1626.857] (II) This device may have been added with another device file.
[ 1626.857] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[ 1626.857] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1626.857] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 14 paused 0
[ 1626.857] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1626.857] (**) Sleep Button: always reports core events
[ 1626.857] (**) evdev: Sleep Button: Device: "/dev/input/event3"
[ 1626.857] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 1626.857] (--) evdev: Sleep Button: Found keys
[ 1626.857] (II) evdev: Sleep Button: Configuring as keyboard
[ 1626.857] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7/event3"
[ 1626.857] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 1626.857] (**) Option "xkb_rules" "evdev"
[ 1626.857] (**) Option "xkb_model" "pc104"
[ 1626.857] (**) Option "xkb_layout" "us"
[ 1626.858] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event12)
[ 1626.858] (II) No input driver specified, ignoring this device.
[ 1626.858] (II) This device may have been added with another device file.
[ 1626.858] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event13)
[ 1626.858] (II) No input driver specified, ignoring this device.
[ 1626.858] (II) This device may have been added with another device file.
[ 1626.858] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event14)
[ 1626.858] (II) No input driver specified, ignoring this device.
[ 1626.858] (II) This device may have been added with another device file.
[ 1626.858] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/event1)
[ 1626.858] (**) USB OPTICAL MOUSE: Applying InputClass "evdev pointer catchall"
[ 1626.858] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 15 paused 0
[ 1626.858] (II) Using input driver 'evdev' for ' USB OPTICAL MOUSE'
[ 1626.858] (**) USB OPTICAL MOUSE: always reports core events
[ 1626.858] (**) evdev: USB OPTICAL MOUSE: Device: "/dev/input/event1"
[ 1626.858] (--) evdev: USB OPTICAL MOUSE: Vendor 0x15d9 Product 0xa4c
[ 1626.858] (--) evdev: USB OPTICAL MOUSE: Found 3 mouse buttons
[ 1626.858] (--) evdev: USB OPTICAL MOUSE: Found scroll wheel(s)
[ 1626.858] (--) evdev: USB OPTICAL MOUSE: Found relative axes
[ 1626.858] (--) evdev: USB OPTICAL MOUSE: Found x and y relative axes
[ 1626.858] (II) evdev: USB OPTICAL MOUSE: Configuring as mouse
[ 1626.858] (II) evdev: USB OPTICAL MOUSE: Adding scrollwheel support
[ 1626.858] (**) evdev: USB OPTICAL MOUSE: YAxisMapping: buttons 4 and 5
[ 1626.858] (**) evdev: USB OPTICAL MOUSE: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1626.858] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:15D9:0A4C.0001/input/input5/event1"
[ 1626.858] (II) XINPUT: Adding extended input device " USB OPTICAL MOUSE" (type: MOUSE, id 10)
[ 1626.858] (II) evdev: USB OPTICAL MOUSE: initialized for relative axes.
[ 1626.858] (**) USB OPTICAL MOUSE: (accel) keeping acceleration scheme 1
[ 1626.859] (**) USB OPTICAL MOUSE: (accel) acceleration profile 0
[ 1626.859] (**) USB OPTICAL MOUSE: (accel) acceleration factor: 2.000
[ 1626.859] (**) USB OPTICAL MOUSE: (accel) acceleration threshold: 4
[ 1626.859] (II) config/udev: Adding input device USB OPTICAL MOUSE (/dev/input/mouse0)
[ 1626.859] (II) No input driver specified, ignoring this device.
[ 1626.859] (II) This device may have been added with another device file.
[ 1626.859] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/event6)
[ 1626.859] (**) ELAN Touchscreen: Applying InputClass "evdev touchscreen catchall"
[ 1626.859] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 16 paused 0
[ 1626.859] (II) Using input driver 'evdev' for 'ELAN Touchscreen'
[ 1626.859] (**) ELAN Touchscreen: always reports core events
[ 1626.859] (**) evdev: ELAN Touchscreen: Device: "/dev/input/event6"
[ 1626.859] (--) evdev: ELAN Touchscreen: Vendor 0x4f3 Product 0x10c
[ 1626.859] (--) evdev: ELAN Touchscreen: Found absolute axes
[ 1626.859] (--) evdev: ELAN Touchscreen: Found absolute multitouch axes
[ 1626.859] (II) evdev: ELAN Touchscreen: No buttons found, faking one.
[ 1626.859] (--) evdev: ELAN Touchscreen: Found x and y absolute axes
[ 1626.859] (--) evdev: ELAN Touchscreen: Found absolute touchscreen
[ 1626.859] (II) evdev: ELAN Touchscreen: Configuring as touchscreen
[ 1626.859] (**) evdev: ELAN Touchscreen: YAxisMapping: buttons 4 and 5
[ 1626.859] (**) evdev: ELAN Touchscreen: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1626.859] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.0008/input/input33/event6"
[ 1626.859] (II) XINPUT: Adding extended input device "ELAN Touchscreen" (type: TOUCHSCREEN, id 11)
[ 1626.859] (II) evdev: ELAN Touchscreen: initialized for absolute axes.
[ 1626.859] (**) ELAN Touchscreen: (accel) keeping acceleration scheme 1
[ 1626.859] (**) ELAN Touchscreen: (accel) acceleration profile 0
[ 1626.859] (**) ELAN Touchscreen: (accel) acceleration factor: 2.000
[ 1626.859] (**) ELAN Touchscreen: (accel) acceleration threshold: 4
[ 1626.859] (II) config/udev: Adding input device ELAN Touchscreen (/dev/input/mouse1)
[ 1626.859] (II) No input driver specified, ignoring this device.
[ 1626.859] (II) This device may have been added with another device file.
[ 1626.860] (II) config/udev: Adding input device USB2.0 UVC HD Webcam (/dev/input/event8)
[ 1626.860] (**) USB2.0 UVC HD Webcam: Applying InputClass "evdev keyboard catchall"
[ 1626.860] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 17 paused 0
[ 1626.860] (II) Using input driver 'evdev' for 'USB2.0 UVC HD Webcam'
[ 1626.860] (**) USB2.0 UVC HD Webcam: always reports core events
[ 1626.860] (**) evdev: USB2.0 UVC HD Webcam: Device: "/dev/input/event8"
[ 1626.860] (--) evdev: USB2.0 UVC HD Webcam: Vendor 0x13d3 Product 0x5188
[ 1626.860] (--) evdev: USB2.0 UVC HD Webcam: Found keys
[ 1626.860] (II) evdev: USB2.0 UVC HD Webcam: Configuring as keyboard
[ 1626.860] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-7/3-7:1.0/input/input17/event8"
[ 1626.860] (II) XINPUT: Adding extended input device "USB2.0 UVC HD Webcam" (type: KEYBOARD, id 12)
[ 1626.860] (**) Option "xkb_rules" "evdev"
[ 1626.860] (**) Option "xkb_model" "pc104"
[ 1626.860] (**) Option "xkb_layout" "us"
[ 1626.860] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event15)
[ 1626.860] (II) No input driver specified, ignoring this device.
[ 1626.860] (II) This device may have been added with another device file.
[ 1626.860] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event16)
[ 1626.860] (II) No input driver specified, ignoring this device.
[ 1626.860] (II) This device may have been added with another device file.
[ 1626.860] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[ 1626.860] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 1626.861] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 18 paused 0
[ 1626.861] (II) Using input driver 'evdev' for 'Asus WMI hotkeys'
[ 1626.861] (**) Asus WMI hotkeys: always reports core events
[ 1626.861] (**) evdev: Asus WMI hotkeys: Device: "/dev/input/event7"
[ 1626.861] (--) evdev: Asus WMI hotkeys: Vendor 0 Product 0
[ 1626.861] (--) evdev: Asus WMI hotkeys: Found keys
[ 1626.861] (II) evdev: Asus WMI hotkeys: Configuring as keyboard
[ 1626.861] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input16/event7"
[ 1626.861] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[ 1626.861] (**) Option "xkb_rules" "evdev"
[ 1626.861] (**) Option "xkb_model" "pc104"
[ 1626.861] (**) Option "xkb_layout" "us"
[ 1626.861] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1626.861] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1626.861] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 19 paused 0
[ 1626.861] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1626.861] (**) AT Translated Set 2 keyboard: always reports core events
[ 1626.861] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1626.861] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 1626.861] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 1626.861] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 1626.861] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1626.861] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[ 1626.861] (**) Option "xkb_rules" "evdev"
[ 1626.861] (**) Option "xkb_model" "pc104"
[ 1626.861] (**) Option "xkb_layout" "us"
[ 1626.861] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event9)
[ 1626.861] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 1626.862] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 20 paused 0
[ 1626.862] (II) Using input driver 'evdev' for 'ETPS/2 Elantech Touchpad'
[ 1626.862] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 1626.862] (**) evdev: ETPS/2 Elantech Touchpad: Device: "/dev/input/event9"
[ 1626.862] (--) evdev: ETPS/2 Elantech Touchpad: Vendor 0x2 Product 0xe
[ 1626.862] (--) evdev: ETPS/2 Elantech Touchpad: Found 1 mouse buttons
[ 1626.862] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute axes
[ 1626.862] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute multitouch axes
[ 1626.862] (--) evdev: ETPS/2 Elantech Touchpad: Found x and y absolute axes
[ 1626.862] (--) evdev: ETPS/2 Elantech Touchpad: Found absolute touchpad.
[ 1626.862] (II) evdev: ETPS/2 Elantech Touchpad: Configuring as touchpad
[ 1626.862] (**) evdev: ETPS/2 Elantech Touchpad: YAxisMapping: buttons 4 and 5
[ 1626.862] (**) evdev: ETPS/2 Elantech Touchpad: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1626.862] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event9"
[ 1626.862] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[ 1626.862] (II) evdev: ETPS/2 Elantech Touchpad: initialized for absolute axes.
[ 1626.862] (**) ETPS/2 Elantech Touchpad: (accel) keeping acceleration scheme 1
[ 1626.862] (**) ETPS/2 Elantech Touchpad: (accel) acceleration profile 0
[ 1626.862] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 1626.862] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 1626.862] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse2)
[ 1626.862] (II) No input driver specified, ignoring this device.
[ 1626.862] (II) This device may have been added with another device file.
[ 1626.862] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 1626.862] (II) No input driver specified, ignoring this device.
[ 1626.862] (II) This device may have been added with another device file.But if I use this one
Section "Device"
Identifier "Nvidia Card"
Driver "nvidia"
VendorName "NVIDIA Corporation"
Option "NoLogo" "true"
BusID "PCI:1:0:0"
EndSection
Section "ServerLayout"
Identifier "ServerLayout0"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0"
Option "OffTime" "0"
EndSectionI am able to start xserver and logon to openbox
Offline
#4 2014-12-15 02:43:25
- fukawi2
- Ex-Administratorino
- From: .vic.au
- Registered: 2007-09-28
- Posts: 6,237
- Website
Re: Xorg wont boot with nvidia
whitetimer wrote:
But if I use this one .... I am able to start xserver and logon to openbox
OK, so use that one?
Are you familiar with our Forum Rules, and How To Ask Questions The Smart Way?
BlueHackers // fscanary // resticctl
Offline
Pages: 1