Arch Linux

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

Today I was only able to perform some quick tests and update catalyst-total @ AUR

quick tests showed that this driver is pretty good.
2d rendering was never that fast on 290X @ catalyst [its almost (edit: well, almost almost ) as fluid as on oss radeon]

IMPORTANT
thing is that from now on theres this new symlink:
ln -snf /usr/lib/libXvBAW.so.1.0 ${pkgdir}/usr/lib/dri/fglrx_drv_video.so
which will conflict with xvba-video packages. Thats amd's will, maybe they will do something with it. Feel free to remove this file(symlink) from your system before updating (if you will be touched by a conflict).

I already have updated xvba-video and opencl-headers (2.0) packages on my disk, as well as catalyst packages, but I need to test it. Before I will do this I have to go asleep. I already feel dizzy, sorry mates. I will perform repo (as well as other AUR packages) update tomorrow.

BTW vaapi seems to not work: http://www.phoronix.com/forums/showthre … post458342

Does anyone have instructions on how to install AMD ADL SDK, everything I try get's shot down because the file I DLed doesn't pass the integrity check, even after I fixed the md5sum.

Did you follow the note?:
NOTE: Download ADL_SDK_6.0.zip manually from
http://developer.amd.com/tools-and-sdks … y-adl-sdk/
and paste it next to this PKGBUILD

Edit: repos are updated, archive repos are named as: [catalyst-stable-14.9] and [catalyst-14.9-ubuntu]

actually vaapi does work well here without additional xvba-video packages

$ mplayer -va vaapi -vo vaapi big_buck_bunny_1080p_h264.mov 
MPlayer SVN-r36265-4.9.2 (C) 2000-2013 MPlayer Team
203 audio & 423 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.

Playing big_buck_bunny_1080p_h264.mov.
libavformat version 55.12.102 (internal)
libavformat file format detected.
[lavf] stream 0: video (h264), -vid 0
[lavf] stream 2: audio (aac), -aid 0, -alang eng
VIDEO:  [H264]  1920x1080  24bpp  24.000 fps  9282.6 kbps (1133.1 kbyte/s)
Clip info:
 major_brand: qt  
 minor_version: 537199360
 compatible_brands: qt  
 creation_time: 2008-05-27 18:40:35
 timecode: 00:00:00:00
Load subtitles in ./
libva info: VA-API version 0.36.0
libva info: va_getDriverName() returns 0
libva info: User requested driver 'fglrx'
libva info: Trying to open /usr/lib/dri//fglrx_drv_video.so
libva info: Found init function __vaDriverInit_0_33
libva info: va_openDriver() returns 0
(...)

just add

export LIBVA_DRIVER_NAME=fglrx

into ~/.bashrc, and if that won't work for all your players you can create something like /etc/profile.d/fglrx-vaapi.sh with lets say:

LIBVA_DRIVER_NAME=fglrx
export LIBVA_DRIVER_NAME
LIBVA_DRIVERS_PATH=/usr/lib/dri/
export LIBVA_DRIVERS_PATH

Edit2: ohh wait, I was too fast because somethings wrong is going on with osd (including subtitles) when using this new vaapi driver, guess it needs some fixes ;P, so it's still beter to use xvba here

Last edited by Vi0L0 (2014-12-11 20:50:17)

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

Kuci

Member

Registered: 2013-03-29

Posts: 38

Website

Re: The AMD/ATI Bar & Grill

How is GDM on Catalyst 14.12 ?

---

Notebook: ASUS U38DT + Samsung SSD 840 EVO 250GB + Intel Dual Band Wireless AC 7260

GitHub

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

Gimme sec, will test in in minutes, for now I can tell that GNOME is working good.
Edit: nope, GDM still segfaults

Last edited by Vi0L0 (2014-12-11 21:26:43)

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

ETNyx

Member

From: Czech republic

Registered: 2010-06-08

Posts: 29

Re: The AMD/ATI Bar & Grill

Gimme sec, will test in in minutes, for now I can tell that GNOME is working good.
Edit: nope, GDM still segfaults

Everyone who's affected by GDM segfaults bug should report it (at amd.com/report ?). AMD claim team for this purpose and for Linux too. So if there will be anought reports, maybe they will fix it.

One example for all. Despite to large amout topics over HW forums, AMD didnt know about HDMI scaling bug. Until some journalist ask them at press conference about Omegas. Next day? Driver version: 14.501.1003.1001 (AMD Catalyst™ HDMI Scaling Hotfix Software Suite). I know it for MS W, but still where is some will,....

so pls report

excieve

Member

Registered: 2014-12-11

Posts: 1

Re: The AMD/ATI Bar & Grill

Out of curiosity tried this shiny new "omega" release after several years on the open source driver. Well, first it didn't work with GDM, then it didn't start neither Gnome 3 (some RandR error apparently) nor Cinnamon (monitor goes right into sleep mode and "XIO:  fatal IO error 11" in the log) with SDDM. Also same old (reported on their unofficial bug tracker) trouble with laptop screen going blank on HD5xxx after stopping X, restoring only on reboot. So no, not good enough yet

MSC

Member

Registered: 2014-07-13

Posts: 33

Re: The AMD/ATI Bar & Grill

I've been using the catalyst-stable repository and updated to 14.12 yesterday. Unfortunately it has a major bug: it causes X to leak memory at nearly 1 MB per second. Needless to say this would render my system unusable within a few hours. Downgrading back to 14.9 solved the problem. All other packages are up-to-date. Anyone else experiencing this? I have dual Radeon HD 7870s if that makes any difference.

schizo-ri

Member

From: Rijeka, Croatia

Registered: 2014-06-01

Posts: 25

Re: The AMD/ATI Bar & Grill

Updated today, haven't seen any problems. Using Gnome with xinitrc. No memory leaks. XBMC is up all the time, playing videos without problems.

Xabre

Member

From: Serbia

Registered: 2009-03-19

Posts: 755

Re: The AMD/ATI Bar & Grill

Am officially furious. Had high hopes that this new Omega crap will fix things, but no, it still crashes or completely locks up the laptop.
So, I install Kubuntu, just for the fun of it, and IT WORKS THERE. Why? Beats me. Same driver, over there just works(TM).
UGH.

I removed everything related to AMD to get a clean environment, reinstalled catalyst-total-pxp, and here's what I get:

 [    62.521] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[    62.521] 
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[    62.523] X Protocol Version 11, Revision 0
[    62.524] Build Operating System: Linux 3.17.2-1-ARCH x86_64 
[    62.524] Current Operating System: Linux megatherion 3.17.6-1-ck #1 SMP PREEMPT Mon Dec 8 06:35:15 EST 2014 x86_64
[    62.524] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-ck.img root=/dev/sda2 rootfstype=ext4 add_efi_memmap rw resume=/dev/sda2 resume_offset=1163264 elevator=bfq quiet splash
[    62.526] Build Date: 10 December 2014  02:34:24PM
[    62.527]  
[    62.528] Current version of pixman: 0.32.6
[    62.529] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    62.529] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    62.532] (==) Log file: "/home/slobo/.local/share/xorg/Xorg.0.log", Time: Fri Dec 12 20:13:08 2014
[    62.533] (==) Using config file: "/etc/X11/xorg.conf"
[    62.533] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    62.534] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    62.534] (==) ServerLayout "aticonfig Layout"
[    62.534] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[    62.534] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[    62.534] (**) |   |-->Device "aticonfig-Device[0]-0"
[    62.534] (==) Automatically adding devices
[    62.534] (==) Automatically enabling devices
[    62.534] (==) Automatically adding GPU devices
[    62.534] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[    62.534] 	Entry deleted from font path.
[    62.534] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    62.534] 	Entry deleted from font path.
[    62.534] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    62.534] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    62.534] 	Entry deleted from font path.
[    62.534] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    62.534] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[    62.534] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[    62.534] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    62.534] (II) Loader magic: 0x818d80
[    62.534] (II) Module ABI versions:
[    62.534] 	X.Org ANSI C Emulation: 0.4
[    62.534] 	X.Org Video Driver: 18.0
[    62.534] 	X.Org XInput driver : 21.0
[    62.534] 	X.Org Server Extension : 8.0
[    62.536] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    62.536] (II) xfree86: Adding drm device (/dev/dri/card0)
[    62.536] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[    62.537] (--) PCI:*(0:0:2:0) 8086:0416:103c:1942 rev 6, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00005000/64
[    62.537] (--) PCI: (0:1:0:0) 1002:6600:103c:1947 rev 0, Mem @ 0x90000000/268435456, 0xb0900000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[    62.537] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    62.537] (II) "glx" will be loaded by default.
[    62.537] (II) LoadModule: "glx"
[    62.537] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[    62.553] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    62.553] 	compiled for 6.9.0, module version = 1.0.0
[    62.553] (II) LoadModule: "fglrx"
[    62.553] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    62.764] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    62.764] 	compiled for 1.4.99.906, module version = 14.50.2
[    62.764] 	Module class: X.Org Video Driver
[    62.764] (II) Loading sub module "fglrxdrm"
[    62.764] (II) LoadModule: "fglrxdrm"
[    62.765] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    62.785] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    62.785] 	compiled for 1.4.99.906, module version = 14.50.2
[    62.785] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[    62.785] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003                          
[    62.785] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:54
[    62.785] (++) using VT number 1

[    62.785] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    62.785] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    62.785] (WW) Falling back to old probe method for fglrx
[    62.830] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    62.842] (WW) LoadKernelModule: Setting of real/effective user Id to 0/0 failed[    62.843] ukiDynamicMajor: found major device number 249
[    62.843] ukiDynamicMajor: found major device number 249
[    62.843] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    62.843] ukiOpenDevice: node name is /dev/ati/card0
[    62.890] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.890] ukiOpenDevice: node name is /dev/ati/card1
[    62.890] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.890] ukiOpenDevice: node name is /dev/ati/card2
[    62.891] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.891] ukiOpenDevice: node name is /dev/ati/card3
[    62.891] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.891] ukiOpenDevice: node name is /dev/ati/card4
[    62.892] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.892] ukiOpenDevice: node name is /dev/ati/card5
[    62.892] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.892] ukiOpenDevice: node name is /dev/ati/card6
[    62.893] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.893] ukiOpenDevice: node name is /dev/ati/card7
[    62.893] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.893] ukiOpenDevice: node name is /dev/ati/card8
[    62.894] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.894] ukiOpenDevice: node name is /dev/ati/card9
[    62.894] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.894] ukiOpenDevice: node name is /dev/ati/card10
[    62.895] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.895] ukiOpenDevice: node name is /dev/ati/card11
[    62.895] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.895] ukiOpenDevice: node name is /dev/ati/card12
[    62.896] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.896] ukiOpenDevice: node name is /dev/ati/card13
[    62.896] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.896] ukiOpenDevice: node name is /dev/ati/card14
[    62.897] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.897] ukiOpenDevice: node name is /dev/ati/card15
[    62.897] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.899] (--) Chipset Supported AMD Graphics Processor (0x6600) found
[    62.900] (II) fglrx(0): pEnt->device->identifier=0x18d9000
[    62.900] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    62.900] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[    62.900] (II) fglrx(0): FB driver is not enabled
[    62.916] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    62.916] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    62.916] (==) fglrx(0): Default visual is TrueColor
[    62.916] (**) fglrx(0): Option "DPMS" "true"
[    62.916] (==) fglrx(0): RGB weight 888
[    62.916] (II) fglrx(0): Using 8 bits per RGB 
[    62.916] (==) fglrx(0): Buffer Tiling is ON
[    62.921] (II) Loading sub module "fglrxdrm"
[    62.921] (II) LoadModule: "fglrxdrm"
[    62.921] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    62.921] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    62.921] 	compiled for 1.4.99.906, module version = 14.50.2
[    62.921] (WW) LoadKernelModule: Setting of real/effective user Id to 0/0 failed[    62.922] ukiDynamicMajor: found major device number 249
[    62.922] ukiDynamicMajor: found major device number 249
[    62.922] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    62.922] ukiOpenDevice: node name is /dev/ati/card0
[    62.923] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.923] ukiOpenDevice: node name is /dev/ati/card1
[    62.923] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.923] ukiOpenDevice: node name is /dev/ati/card2
[    62.924] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.924] ukiOpenDevice: node name is /dev/ati/card3
[    62.924] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.924] ukiOpenDevice: node name is /dev/ati/card4
[    62.925] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.925] ukiOpenDevice: node name is /dev/ati/card5
[    62.925] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.925] ukiOpenDevice: node name is /dev/ati/card6
[    62.926] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.926] ukiOpenDevice: node name is /dev/ati/card7
[    62.926] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.926] ukiOpenDevice: node name is /dev/ati/card8
[    62.927] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.927] ukiOpenDevice: node name is /dev/ati/card9
[    62.927] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.927] ukiOpenDevice: node name is /dev/ati/card10
[    62.928] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.928] ukiOpenDevice: node name is /dev/ati/card11
[    62.928] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.928] ukiOpenDevice: node name is /dev/ati/card12
[    62.929] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.929] ukiOpenDevice: node name is /dev/ati/card13
[    62.929] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.929] ukiOpenDevice: node name is /dev/ati/card14
[    62.930] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.930] ukiOpenDevice: node name is /dev/ati/card15
[    62.930] ukiOpenByBusid: ukiOpenMinor returns -1003
[    62.930] (**) fglrx(0): NoAccel = NO
[    62.931] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    62.931] (--) fglrx(0): Chipset: "AMD Radeon HD 8600/8700M" (Chipset = 0x6600)
[    62.931] (--) fglrx(0): (PciSubVendor = 0x103c, PciSubDevice = 0x1947)
[    62.931] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    62.931] (--) fglrx(0): Linear framebuffer (phys) at 0x90000000
[    62.931] (--) fglrx(0): MMIO registers at 0xb0900000
[    62.931] (--) fglrx(0): I/O port at 0x00004000
[    62.931] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    62.931] (EE) fglrx(0): failed to map MMIO register space!(EE) fglrx(0): MapMMIO failed
[    62.931] (EE) fglrx(0): PreInitAdapter failed
[    62.931] (EE) fglrx(0): PreInit failed
[    62.931] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === end
[    62.931] (II) UnloadModule: "fglrx"
[    62.931] (II) UnloadSubModule: "fglrxdrm"
[    62.931] (II) Unloading fglrxdrm
[    62.931] (II) UnloadSubModule: "fglrxdrm"
[    62.931] (EE) Screen(s) found, but none have a usable configuration.
[    62.931] (EE) 
Fatal server error:
[    62.931] (EE) no screens found(EE) 
[    62.931] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    62.931] (EE) Please also check the log file at "/home/slobo/.local/share/xorg/Xorg.0.log" for additional information.
[    62.931] (EE) 
[    62.933] (EE) Server terminated with error (1). Closing log file.

Then I noticed Kubuntu still uses Xorg in root mode, added /etc/X11/Xwrapper.config  with needs_root_rights = yes, and result is:

[  1330.335] 
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[  1330.336] 
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[  1330.338] X Protocol Version 11, Revision 0
[  1330.339] Build Operating System: Linux 3.17.2-1-ARCH x86_64 
[  1330.340] Current Operating System: Linux megatherion 3.17.6-1-ck #1 SMP PREEMPT Mon Dec 8 06:35:15 EST 2014 x86_64
[  1330.340] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-ck.img root=/dev/sda2 rootfstype=ext4 add_efi_memmap rw resume=/dev/sda2 resume_offset=1163264 elevator=bfq quiet splash
[  1330.342] Build Date: 10 December 2014  02:34:24PM
[  1330.343]  
[  1330.344] Current version of pixman: 0.32.6
[  1330.346] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  1330.346] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  1330.349] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 12 19:52:06 2014
[  1330.350] (==) Using config file: "/etc/X11/xorg.conf"
[  1330.351] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  1330.352] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  1330.352] (==) ServerLayout "aticonfig Layout"
[  1330.352] (**) |-->Screen "aticonfig-Screen[0]-0" (0)
[  1330.352] (**) |   |-->Monitor "aticonfig-Monitor[0]-0"
[  1330.352] (**) |   |-->Device "aticonfig-Device[0]-0"
[  1330.352] (==) Automatically adding devices
[  1330.352] (==) Automatically enabling devices
[  1330.352] (==) Automatically adding GPU devices
[  1330.352] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  1330.352] 	Entry deleted from font path.
[  1330.352] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[  1330.352] 	Entry deleted from font path.
[  1330.352] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[  1330.352] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[  1330.352] 	Entry deleted from font path.
[  1330.352] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[  1330.352] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/Type1/
[  1330.352] (**) ModulePath set to "/usr/lib/xorg/modules/updates,/usr/lib/xorg/modules"
[  1330.352] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  1330.352] (II) Loader magic: 0x818d80
[  1330.352] (II) Module ABI versions:
[  1330.352] 	X.Org ANSI C Emulation: 0.4
[  1330.352] 	X.Org Video Driver: 18.0
[  1330.352] 	X.Org XInput driver : 21.0
[  1330.352] 	X.Org Server Extension : 8.0
[  1330.354] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[  1330.354] (II) xfree86: Adding drm device (/dev/dri/card0)
[  1330.354] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[  1330.355] (--) PCI:*(0:0:2:0) 8086:0416:103c:1942 rev 6, Mem @ 0xb0000000/4194304, 0xa0000000/268435456, I/O @ 0x00005000/64
[  1330.355] (--) PCI: (0:1:0:0) 1002:6600:103c:1947 rev 0, Mem @ 0x90000000/268435456, 0xb0900000/262144, I/O @ 0x00004000/256, BIOS @ 0x????????/131072
[  1330.355] (II) Open ACPI successful (/var/run/acpid.socket)
[  1330.355] (II) "glx" will be loaded by default.
[  1330.355] (II) LoadModule: "glx"
[  1330.356] (II) Loading /usr/lib/xorg/modules/updates/extensions/libglx.so
[  1330.387] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[  1330.387] 	compiled for 6.9.0, module version = 1.0.0
[  1330.387] (II) LoadModule: "fglrx"
[  1330.387] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[  1330.576] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[  1330.576] 	compiled for 1.4.99.906, module version = 14.50.2
[  1330.576] 	Module class: X.Org Video Driver
[  1330.576] (II) Loading sub module "fglrxdrm"
[  1330.576] (II) LoadModule: "fglrxdrm"
[  1330.576] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[  1330.588] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[  1330.588] 	compiled for 1.4.99.906, module version = 14.50.2
[  1330.588] (II) AMD Proprietary Linux Driver Version Identifier:14.50.2
[  1330.588] (II) AMD Proprietary Linux Driver Release Identifier: 14.501.1003                          
[  1330.588] (II) AMD Proprietary Linux Driver Build Date: Nov 20 2014 21:22:54
[  1330.588] (++) using VT number 1

[  1330.588] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  1330.588] (WW) Falling back to old probe method for fglrx
[  1330.658] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[  1330.677] ukiDynamicMajor: found major device number 249
[  1330.677] ukiDynamicMajor: found major device number 249
[  1330.677] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[  1330.677] ukiOpenDevice: node name is /dev/ati/card0
[  1330.677] ukiOpenDevice: open result is 12, (OK)
[  1331.801] ukiOpenByBusid: ukiOpenMinor returns 12
[  1331.801] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[  1331.803] (--) Chipset Supported AMD Graphics Processor (0x6600) found
[  1331.804] (II) fglrx: intel VGA device detected, load intel driver.
[  1331.804] (II) LoadModule: "intel"
[  1331.804] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[  1331.804] (II) Module intel: vendor="X.Org Foundation"
[  1331.804] 	compiled for 1.16.1, module version = 2.99.916
[  1331.804] 	Module class: X.Org Video Driver
[  1331.804] 	ABI class: X.Org Video Driver, version 18.0
[  1331.805] (II) fglrx(0): pEnt->device->identifier=0x1850fc0
[  1331.805] (II) intel(1): pEnt->device->identifier=(nil)
[  1331.805] (EE) Screen 1 deleted because of no matching config section.
[  1331.805] (II) UnloadModule: "intel"
[  1331.805] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === begin
[  1331.805] (II) fglrx(0): FB driver is enabled
[  1331.805] (II) fglrx(0): PowerXpress: Discrete GPU is selected.
[  1331.989] (II) fglrx(0): PowerXpress: Diagnostic output from /usr/lib64/fglrx/switchlibGL:
Switch to AMD

[  1334.236] (EE) fglrx(0): [drm] failed to set drm interface version: Permission denied [13].
[  1334.236] (II) fglrx(0): [drm] Contents of '/sys/kernel/debug/dri/0/clients':
[  1334.236] (II) fglrx(0): [drm] a dev	pid    uid	magic
[  1334.236] (II) fglrx(0): [drm] 
[  1334.236] (II) fglrx(0): [drm] y   0 22278     0          0
[  1334.236] (II) fglrx(0): [drm] y   0   604     0          0
[  1334.236] (EE) fglrx(0): Failed to become DRM master.
[  1334.236] (WW) fglrx(0): Quitting screen -- PreInit PowerXpress failed.
[  1334.236] (II) fglrx(0): === [xdl_xs116_atiddxPreInit] === end
[  1334.236] (EE) 
[  1334.236] (EE) Backtrace:
[  1334.269] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x5942e6]
[  1334.269] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x198439) [0x598439]
[  1334.269] (EE) 2: /usr/lib/libc.so.6 (0x7f26804ff000+0x33b20) [0x7f2680532b20]
[  1334.269] (EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f267c685000+0x16405) [0x7f267c69b405]
[  1334.269] (EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f267c685000+0x12dc4f) [0x7f267c7b2c4f]
[  1334.269] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs116_atiddxPxFreeScreen+0x2e) [0x7f267d23024e]
[  1334.270] (EE) 6: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs116_atiddxFreeScreen+0x64) [0x7f267d20e534]
[  1334.270] (EE) 7: /usr/bin/Xorg.bin (xf86DeleteScreen+0x5a) [0x480e6a]
[  1334.270] (EE) 8: /usr/bin/Xorg.bin (InitOutput+0xaf7) [0x47a507]
[  1334.270] (EE) 9: /usr/bin/Xorg.bin (0x400000+0x3b7ba) [0x43b7ba]
[  1334.270] (EE) 10: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f268051f040]
[  1334.270] (EE) 11: /usr/bin/Xorg.bin (0x400000+0x25dce) [0x425dce]
[  1334.270] (EE) 
[  1334.270] (EE) Segmentation fault at address 0x14
[  1334.270] (EE) 
Fatal server error:
[  1334.270] (EE) Caught signal 11 (Segmentation fault). Server aborting
[  1334.270] (EE) 
[  1334.270] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  1334.271] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  1334.271] (EE) 
[  1334.277] (EE) Server terminated with error (1). Closing log file.

For those who weren't following my previous rants, it's a HP ProBook, with Haswell/Radeon hybrid.

00:02.0 VGA compatible controller [0300]: Intel Corporation 4th Gen Core Processor Integrated Graphics Controller [8086:0416] (rev 06)
        Subsystem: Hewlett-Packard Company Device [103c:1942]
        Kernel driver in use: i915
        Kernel modules: i915
--
01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] Mars [Radeon HD 8670A/8670M/8750M] [1002:6600]
        Subsystem: Hewlett-Packard Company Device [103c:1947]
        Kernel driver in use: fglrx_pci
        Kernel modules: radeon, fglrx

I wonder, just wonder, what's there left to do. I've been googling, reading, whatnot, and nothing, no matter what I do, same error.
Any hint, even a crazy one, is most welcome and appreciated.

Last edited by Xabre (2014-12-12 19:35:52)

clfarron4

Member

From: London, UK

Registered: 2013-06-28

Posts: 2,163

Website

Re: The AMD/ATI Bar & Grill

@Xabre: There's a lot more to it than just the drivers, and it could damn well be anything. From the sounds of it, you loaded up Kubuntu 14.04 which is packages with X.org 1.15, where Arch uses X.org 1.16. Also, who knows what patches the Ubuntu developers put into their software to make it do their magic stuff. If we could work that out, then maybe it'd be possible to work out why there are performance issues on Arch.

---

Claire is fine.
Problems? I have dysgraphia, so clear and concise please.
My public GPG key for package signing
My x86_64 package repository

Xabre

Member

From: Serbia

Registered: 2009-03-19

Posts: 755

Re: The AMD/ATI Bar & Grill

Kubuntu 14.10 uses Xorg 1.16 as well, that's why I used it as a refference. Their whole graphic stack there is currently pretty similar to what Arch offers, so it must be something they add, some patch or whatever voodoo magic.
What bugs me the most is that the damn thing works with Xorg 1.15, but it's getting almost impossible to use it due to rolling nature of Arch. Pretty soon it will be unusable that way( it already complains about vaapi support after new mesa and stuff).

Line that keeps repeating itself, however,

[    62.931] (EE) fglrx(0): failed to map MMIO register space!(EE) fglrx(0): MapMMIO failed

is something related to kernel, or at least that's what Google's been suggesting, and suggestions are mostly for older kernels.
Kubuntu 14.10 uses Linux 3.16.0, we're on 3.17.* for a while now, that's about the only hint that's left. Will try with LTS kernel and see how it goes there, though my hopes are very low at the moment.

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

Last time i checked ubuntus fglrx i saw many many patches out there, maybe heres the solution. It could be also a good idea to ask ubuntus maintainer, maybe he knows about some workaround. Also remember that ubuntu is officially supported by fglrx - things should to work there, where if not there? .
I won't be able to help you much here because I don't have pxp hardware. Maybe I could help in other way, just don't know how. There's also one important thing - intel driver, i believe that fglrx must to know how to talk to intel driver, and some changes on intel side could brake their conversation. I guess I would start from here.

Meanwhile I'm continuing testing, I noted no memleaks for now (maybe it's related to crossfire, could some crossfire owner confirm the problem?). metro ll is fluid on maxed settings.

Last edited by Vi0L0 (2014-12-12 20:48:32)

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

hippieben

Member

Registered: 2013-10-27

Posts: 218

Re: The AMD/ATI Bar & Grill

I'm still getting sections of my screen flashing / artifacting I was hoping this would be fixed by now, but it seems like something that I'm just going to have to put up with unless anyone has figured out some kind of solution...

Xabre

Member

From: Serbia

Registered: 2009-03-19

Posts: 755

Re: The AMD/ATI Bar & Grill

Hmm, was wrong (or better: don't know how to read), ubuntu uses 2.9.914 intel driver, we use 2.9.916.
Interesting note in their changelog:

  * Fix a crash when fglrx steals the screen in DGPU or IGPU mode.
    - fix-uxa-fglrx-stealing.diff

parchedas

Member

From: Cambridge, UK

Registered: 2013-06-01

Posts: 74

Re: The AMD/ATI Bar & Grill

I don't know if it was this update or something else but Metro: LL now gets past the "press any key page" for me without crashing.

likeit92

Member

From: Germany

Registered: 2014-12-11

Posts: 2

Re: The AMD/ATI Bar & Grill

I found a very interesting bug. If I connect my Radeon 280X with Display-Port and HDMI my screens are always black. If I use HDMI and DVI the screens works great.

XORG.LOG: This lines alway repeat.

[    29.544] (II) Loading sub module "ddc"
[    29.544] (II) LoadModule: "ddc"
[    29.544] (II) Module "ddc" already built-in
[    29.544] (II) fglrx(0): Connected Display0: DFP5
[    29.544] (II) fglrx(0): Connected Display1: DFP9
[    29.545] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    29.545] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    29.545] (II) fglrx(0): Using hsync ranges from config file
[    29.545] (II) fglrx(0): Using vrefresh ranges from config file
[    29.545] (II) fglrx(0): Printing DDC gathered Modelines:
[    29.545] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    29.545] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    29.545] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    29.545] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    29.545] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    29.545] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    29.545] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    29.545] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    29.545] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    29.545] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    29.545] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    29.545] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    29.545] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    29.545] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    29.545] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    29.545] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    29.545] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    29.545] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    29.552] (II) fglrx(0): DAL force OS to Re-enumerate Modes.
[    29.554] (II) fglrx(0): Hot-plug event occurs on device: 1:0:0 
[    29.583] (II) Loading sub module "ddc"
[    29.583] (II) LoadModule: "ddc"
[    29.583] (II) Module "ddc" already built-in
[    29.583] (II) fglrx(0): Connected Display0: DFP5
[    29.583] (II) fglrx(0): Connected Display1: DFP9
[    29.583] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    29.583] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    29.583] (II) fglrx(0): Using hsync ranges from config file
[    29.583] (II) fglrx(0): Using vrefresh ranges from config file
[    29.583] (II) fglrx(0): Printing DDC gathered Modelines:
[    29.583] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    29.583] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    29.583] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    29.583] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    29.583] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    29.583] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    29.583] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    29.583] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    29.583] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    29.583] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    29.583] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    29.583] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    29.583] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    29.583] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    29.583] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    29.583] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    29.583] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    29.584] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    29.591] (II) fglrx(0): DAL force OS to Re-enumerate Modes.
[    29.600] (II) Loading sub module "ddc"
[    29.600] (II) LoadModule: "ddc"
[    29.600] (II) Module "ddc" already built-in
[    29.600] (II) fglrx(0): Connected Display0: DFP5
[    29.600] (II) fglrx(0): Connected Display1: DFP9
[    29.600] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    29.600] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    29.600] (II) fglrx(0): Using hsync ranges from config file
[    29.600] (II) fglrx(0): Using vrefresh ranges from config file
[    29.600] (II) fglrx(0): Printing DDC gathered Modelines:
[    29.600] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    29.600] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    29.600] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    29.600] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    29.600] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    29.600] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    29.600] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    29.600] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    29.600] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    29.600] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    29.600] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    29.600] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    29.600] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    29.600] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    29.600] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    29.600] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    29.600] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    29.601] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    29.607] (II) fglrx(0): DAL force OS to Re-enumerate Modes.
[    29.609] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    29.609] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    29.609] (II) fglrx(0): Using hsync ranges from config file
[    29.609] (II) fglrx(0): Using vrefresh ranges from config file
[    29.609] (II) fglrx(0): Printing DDC gathered Modelines:
[    29.609] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    29.609] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    29.609] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    29.609] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    29.609] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    29.609] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    29.609] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    29.609] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    29.609] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    29.609] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    29.609] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    29.609] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    29.609] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    29.609] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    29.609] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    29.609] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    29.609] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    29.610] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    29.617] (II) fglrx(0): xdl_xs116_atiddxDisplayScreenEnableDisplays
[    30.098] (II) Loading sub module "ddc"
[    30.098] (II) LoadModule: "ddc"
[    30.098] (II) Module "ddc" already built-in
[    30.098] (II) fglrx(0): Connected Display0: DFP5
[    30.098] (II) fglrx(0): Connected Display1: DFP9
[    30.098] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    30.098] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    30.098] (II) fglrx(0): Using hsync ranges from config file
[    30.098] (II) fglrx(0): Using vrefresh ranges from config file
[    30.098] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.098] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    30.098] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    30.098] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    30.098] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    30.098] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    30.098] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    30.098] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.098] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    30.098] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    30.098] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    30.098] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    30.099] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    30.099] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    30.099] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    30.099] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    30.099] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    30.099] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    30.099] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    30.106] (II) fglrx(0): DAL force OS to Re-enumerate Modes.
[    30.115] (II) Loading sub module "ddc"
[    30.115] (II) LoadModule: "ddc"
[    30.115] (II) Module "ddc" already built-in
[    30.115] (II) fglrx(0): Connected Display0: DFP5
[    30.115] (II) fglrx(0): Connected Display1: DFP9
[    30.115] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    30.115] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    30.115] (II) fglrx(0): Using hsync ranges from config file
[    30.115] (II) fglrx(0): Using vrefresh ranges from config file
[    30.115] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.115] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    30.115] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    30.115] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    30.115] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    30.115] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    30.115] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    30.115] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.115] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    30.115] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    30.115] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    30.115] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    30.115] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    30.115] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    30.115] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    30.115] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    30.115] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    30.115] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    30.115] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    30.123] (II) fglrx(0): DAL force OS to Re-enumerate Modes.
[    30.125] (II) fglrx(0): Hot-plug event occurs on device: 1:0:0 
[    30.153] (II) Loading sub module "ddc"
[    30.153] (II) LoadModule: "ddc"
[    30.153] (II) Module "ddc" already built-in
[    30.153] (II) fglrx(0): Connected Display0: DFP5
[    30.153] (II) fglrx(0): Connected Display1: DFP9
[    30.153] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    30.153] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    30.153] (II) fglrx(0): Using hsync ranges from config file
[    30.153] (II) fglrx(0): Using vrefresh ranges from config file
[    30.153] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.153] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    30.153] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    30.153] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    30.153] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    30.153] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    30.153] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    30.153] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.153] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    30.153] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    30.153] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    30.153] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    30.153] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    30.153] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    30.153] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    30.153] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    30.153] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    30.153] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    30.153] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    30.160] (II) fglrx(0): DAL force OS to Re-enumerate Modes.
[    30.169] (II) Loading sub module "ddc"
[    30.169] (II) LoadModule: "ddc"
[    30.169] (II) Module "ddc" already built-in
[    30.169] (II) fglrx(0): Connected Display0: DFP5
[    30.169] (II) fglrx(0): Connected Display1: DFP9
[    30.169] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    30.169] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    30.169] (II) fglrx(0): Using hsync ranges from config file
[    30.169] (II) fglrx(0): Using vrefresh ranges from config file
[    30.169] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.169] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    30.169] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    30.169] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    30.169] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    30.169] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    30.169] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    30.169] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.169] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    30.169] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    30.169] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    30.169] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    30.169] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    30.169] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    30.169] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    30.169] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    30.169] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    30.169] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    30.170] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    30.176] (II) fglrx(0): DAL force OS to Re-enumerate Modes.
[    30.178] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    30.178] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    30.178] (II) fglrx(0): Using hsync ranges from config file
[    30.178] (II) fglrx(0): Using vrefresh ranges from config file
[    30.178] (II) fglrx(0): Printing DDC gathered Modelines:
[    30.178] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    30.178] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    30.178] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    30.178] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    30.178] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    30.178] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    30.178] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    30.178] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    30.178] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    30.178] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    30.178] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    30.178] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    30.178] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    30.178] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    30.178] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    30.178] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    30.178] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    30.178] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    30.185] (II) fglrx(0): xdl_xs116_atiddxDisplayScreenEnableDisplays
[    31.093] (II) Loading sub module "ddc"
[    31.093] (II) LoadModule: "ddc"
[    31.093] (II) Module "ddc" already built-in
[    31.093] (II) fglrx(0): Connected Display0: DFP5
[    31.093] (II) fglrx(0): Connected Display1: DFP9
[    31.094] (II) fglrx(0): User Preference Output DFP5 using refresh rate 60.0 Hz.
[    31.094] (II) fglrx(0): EDID vendor "GSM", prod id 22654
[    31.094] (II) fglrx(0): Using hsync ranges from config file
[    31.094] (II) fglrx(0): Using vrefresh ranges from config file
[    31.094] (II) fglrx(0): Printing DDC gathered Modelines:
[    31.094] (II) fglrx(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    31.094] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[    31.094] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[    31.094] (II) fglrx(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[    31.094] (II) fglrx(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    31.094] (II) fglrx(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    31.094] (II) fglrx(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    31.094] (II) fglrx(0): Modeline "1680x1050"x0.0  119.00  1680 1728 1760 1840  1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
[    31.094] (II) fglrx(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    31.094] (II) fglrx(0): Modeline "1280x960"x0.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    31.094] (II) fglrx(0): Modeline "1152x864"x60.0   81.62  1152 1216 1336 1520  864 865 868 895 -hsync +vsync (53.7 kHz e)
[    31.094] (II) fglrx(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[    31.094] (II) fglrx(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[    31.094] (II) fglrx(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[    31.094] (II) fglrx(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[    31.094] (II) fglrx(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[    31.094] (II) fglrx(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[    31.094] (II) fglrx(0): User Preference Output DFP9 using refresh rate 60.0 Hz.
[    31.101] (II) fglrx(0): DAL force OS to Re-enumerate Modes.

Here is my last xorg.log before I using DVI.

With catalyst 14.9 and xf86-video-ati I never had this problems.

Sorry for my English!!!

MSC

Member

Registered: 2014-07-13

Posts: 33

Re: The AMD/ATI Bar & Grill

Got a chance to test again today and my memory leak issue happens with both Xorg 1.15 and 1.16. Unfortunately I can't remove one card or disable Crossfire because my system is a Mac Pro (judge all you want...this machine is sexy ) and trying to set it up without Crossfire gives me no video output at all. So my guess would be it's either caused by Crossfire or by one of the workstation graphics features, although the latter are all turned off as far as I can tell.

optiligence

Member

Registered: 2014-12-15

Posts: 18

Re: The AMD/ATI Bar & Grill

for now I can tell that GNOME is working good.

@Vi0L0 Can you help me then?
My Gnome is broken since the 3.14 release, I don’t want to use another DE and I can’t use the open source drivers because they fail the display port link training with my internal display.

I too have this problem:

then it didn't start neither Gnome 3 (some RandR error apparently)

Which was reported here.

Out of curiosity I installed a second arch from scratch and it’s experiencing the same problem.
There may be some settings which circumvent the problematic code.
Any idea how I could get it to work?

Last edited by optiligence (2014-12-15 16:36:03)

C13251

Member

Registered: 2013-12-13

Posts: 6

Re: The AMD/ATI Bar & Grill

Got a chance to test again today and my memory leak issue happens with both Xorg 1.15 and 1.16. Unfortunately I can't remove one card or disable Crossfire because my system is a Mac Pro (judge all you want...this machine is sexy ) and trying to set it up without Crossfire gives me no video output at all. So my guess would be it's either caused by Crossfire or by one of the workstation graphics features, although the latter are all turned off as far as I can tell.

I don't have crossfire but I'm having the memory leak issue

Jeager

Member

Registered: 2010-05-16

Posts: 9

Re: The AMD/ATI Bar & Grill

14.12 + 1.16 seems to work great on a fresh install on my I5/R9 290 and Cinnamon (but GDM isnt working)

Vi0L0

Member

From: Poland

Registered: 2009-06-24

Posts: 1,349

Website

Re: The AMD/ATI Bar & Grill

for now I can tell that GNOME is working good.

@Vi0L0 Can you help me then?
My Gnome is broken since the 3.14 release, I don’t want to use another DE and I can’t use the open source drivers because they fail the display port link training with my internal display.

I too have this problem:

then it didn't start neither Gnome 3 (some RandR error apparently)

Which was reported here.

Out of curiosity I installed a second arch from scratch and it’s experiencing the same problem.
There may be some settings which circumvent the problematic code.
Any idea how I could get it to work?

Not sure, I was able to fix my problems with gnome, but it could be irrevlant (and turned out not related to catalyst), more here https://bbs.archlinux.org/viewtopic.php … 8#p1471978

Today I'm gonna update amdapp-sdk on [catalyst] repo with 3.0 beta, 2.9.1 stable version will be available on [catalyst-stable] repo. 3.0 beta brings opencl 2.0 support, theres lot of examples for it and there are some nice docs from amd (available in amdapp-sdk-docs).
I'm sad because CodeXL still got this "OpenCL-OpenGL sharing is inactive" bug and don't render the smoke on teapot example ... It's working fine on windows 8.1, which makes me sad even more heh... (on Ubuntu some devices are rendering smoke, some are not, but "OpenCL-OpenGL sharing is inactive" bug is always there, on Windows 8.1 there's no error)

Hmm, was wrong (or better: don't know how to read), ubuntu uses 2.9.914 intel driver, we use 2.9.916.
Interesting note in their changelog:

  * Fix a crash when fglrx steals the screen in DGPU or IGPU mode.
    - fix-uxa-fglrx-stealing.diff

Could you check this patch (on our 2.9.916)? It looks promising. If not - let me know, I will prepare pkg in free time.

Last edited by Vi0L0 (2014-12-15 21:42:05)

---

GPG key: http://pgp.mit.edu:11371/pks/lookup?op= … 2D653C3094  or  http://keys.gnupg.net/pks/lookup?op=get … 2D653C3094

MSC

Member

Registered: 2014-07-13

Posts: 33

Re: The AMD/ATI Bar & Grill

I don't have crossfire but I'm having the memory leak issue

Interesting, what GPU do you have? Maybe it's related to the model?

I'm also using the MATE desktop environment with LightDM, but I'd be surprised if that makes a difference...

hippieben

Member

Registered: 2013-10-27

Posts: 218

Re: The AMD/ATI Bar & Grill

Got a chance to test again today and my memory leak issue happens with both Xorg 1.15 and 1.16. Unfortunately I can't remove one card or disable Crossfire because my system is a Mac Pro (judge all you want...this machine is sexy ) and trying to set it up without Crossfire gives me no video output at all. So my guess would be it's either caused by Crossfire or by one of the workstation graphics features, although the latter are all turned off as far as I can tell.

I don't have crossfire but I'm having the memory leak issue

What version of X are you using?  I was having a horrible memory leak using 1.15, but I've been testing out 1.16 the past few days and X has been behaving properly.  I am also using OpenGL2.0 rather than the default of 3.0 for kwin compositing. 

I am however experiencing some issues with libvaapi and VLC.  dmesg is giving me this error occasionally. 

[55112.309803] vlc[25930]: segfault at 0 ip 00007fa831bb39ff sp 00007fa86b49e948 error 4 in libvaapi_plugin.so[7fa831baf000+7000]

cassfalg

Member

Registered: 2014-10-21

Posts: 7

Re: The AMD/ATI Bar & Grill

Tried again with 14.12 drivers and xorg 1.16, kdm login manager and startx both. Tried to open a gnome session (3.14). Gives "Oh no! Something has gone wrong." right after the start of the session or right after executing gnome-session in startx's xterm. Also the case for a newly created user. Journalctl says (relevant section I guess)

Dez 17 16:14:54 chris-u38n-arch gnome-session[983]: X Error of failed request:  BadValue (integer parameter out of range for operation)
Dez 17 16:14:54 chris-u38n-arch gnome-session[983]: Major opcode of failed request:  141 (RANDR)
Dez 17 16:14:54 chris-u38n-arch gnome-session[983]: Minor opcode of failed request:  13 (RRChangeOutputProperty)
Dez 17 16:14:54 chris-u38n-arch gnome-session[983]: Value in failed request:  0x77
Dez 17 16:14:54 chris-u38n-arch gnome-session[983]: Serial number of failed request:  302
Dez 17 16:14:54 chris-u38n-arch gnome-session[983]: Current serial number in output stream:  304
Dez 17 16:14:54 chris-u38n-arch gnome-session[983]: gnome-session[983]: WARNING: App 'gnome-shell.desktop' exited with code 1
Dez 17 16:14:54 chris-u38n-arch gnome-session[983]: WARNING: App 'gnome-shell.desktop' exited with code 1
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: X Error of failed request:  BadValue (integer parameter out of range for operation)
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: Major opcode of failed request:  141 (RANDR)
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: Minor opcode of failed request:  13 (RRChangeOutputProperty)
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: Value in failed request:  0x77
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: Serial number of failed request:  302
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: Current serial number in output stream:  304
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: WARNING: App 'gnome-shell.desktop' exited with code 1
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: gnome-session[983]: WARNING: App 'gnome-shell.desktop' exited with code 1
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: gnome-session[983]: WARNING: App 'gnome-shell.desktop' respawning too quickly
Dez 17 16:14:55 chris-u38n-arch gnome-session[983]: Unrecoverable failure in required component gnome-shell.desktop

Any ideas?

What is atieventsd for, btw? Can't start it, it misses acpid.socket - even after I installed acpid. Do I need it?

Last edited by cassfalg (2014-12-17 15:29:30)

optiligence

Member

Registered: 2014-12-15

Posts: 18

Re: The AMD/ATI Bar & Grill

I reported the bug: https://bugzilla.gnome.org/show_bug.cgi?id=741581
I patched mutter for me using the trap calls mentioned in the bug report, which surprisingly didn’t work the next day, so currently the offending method is just completely commented out in my build and everything is working fine again.

cassfalg

Member

Registered: 2014-10-21

Posts: 7

Re: The AMD/ATI Bar & Grill

Gosh, thank you so much for that.
I'd really like to use my laptop again some time
Can you provide a patch for mutter?