You are not logged in.

#1 2015-01-22 09:04:43

Pasithee
Member
Registered: 2015-01-21
Posts: 2

[SOLVED] Brother MFC-1810 Driver install

When i try to install the Driver for my Brother MFC-1810, from here  , with the commands form this wiki entry, or any other Wiki entry i could find, i only get a etc/ opt/ and var/ folder after i use  rpmextract.sh mfc1810cupswrapper-3.0.1-1.i386.rpm and rpmextract.sh mfc1810lpr-3.0.1-1.i386.rpm. And not a usr/ folder like in the wiki. I know it´s a different printer. Also there is no cupswrapper file, the best i can get is a brother_lpdwrapper_MFC1810, in a folder called cupswrapper. I try just using the ppd file, but this didn't  worker ether and i can´t find out how to apply , this  wiki entry for my driver.
Any help is appreciated,

Last edited by Pasithee (2015-01-24 11:29:56)

Offline

#2 2015-01-22 11:30:40

pb
Member
From: Krakow, PL
Registered: 2014-12-26
Posts: 326
Website

Re: [SOLVED] Brother MFC-1810 Driver install

Some people from Manjaro's forum use this Brother driver install: http://support.brother.com/g/b/download … &type3=625 successfuly. Maybe try this? (Of course, you must have all utilities unable to unpack *.deb or *.rpm file - driver script is a little helpfully in this).
From the other hand, maybe I'll try to make PKGBUILD for this driver lately.

Offline

#3 2015-01-24 11:21:19

Pasithee
Member
Registered: 2015-01-21
Posts: 2

Re: [SOLVED] Brother MFC-1810 Driver install

The Brother install worked without any problem, thanks so much.
Install dpkg from the AUR
Get the Package: wget http://download.brother.com/welcome/dlf … 2.0.0-1.gz
Unpack it with  gunzip -d linux-brprinter-installer-2.0.0-1.gz
Make it executable with chmod +x linux-brprinter-installer-2.0.0-1
Run it with sudo ./linux-brprinter-installer-2.0.0-1

Last edited by Pasithee (2015-01-24 12:13:06)

Offline

#4 2017-01-11 09:55:00

thelynx
Member
Registered: 2017-01-10
Posts: 5

Re: [SOLVED] Brother MFC-1810 Driver install

I know this is an old post, it just helped me install my new Brother DCP-T300. Thank you so much!!

Offline

#5 2017-01-11 18:24:41

WorMzy
Forum Moderator
From: Scotland
Registered: 2010-06-16
Posts: 9,055
Website

Re: [SOLVED] Brother MFC-1810 Driver install

thelynx wrote:

I know this is an old post

Then please don't bump it.

https://wiki.archlinux.org/index.php/Co … bumping.22

Closing.


Sakura:-
Mobo: MSI X299 TOMAHAWK ARCTIC // Processor: Intel Core i7-7820X 3.6GHz // GFX: nVidia GeForce GTX 970 // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 5x 1TB HDD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.

Offline

Board footer

Powered by FluxBB