You are not logged in.
Hi,
I upgraded pacman -Syu and post reboot I am not able to connect to wifi.
I use nmcli to setup and config the connection.
Following is op/ of journalctl -xe
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: starting connection 'wifi-loco'
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 1 of 5 (Device Prepare) scheduled...
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 1 of 5 (Device Prepare) started...
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 2 of 5 (Device Configure) scheduled...
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 1 of 5 (Device Prepare) complete.
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 2 of 5 (Device Configure) starting...
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): device state change: prepare -> config (reason 'none') [40 50 0]
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: (wifi) access point 'wifi-loco' has security, but secrets are re
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): device state change: config -> need-auth (reason 'none') [50 60 0]
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 2 of 5 (Device Configure) complete.
Feb 12 14:08:02 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 1 of 5 (Device Prepare) scheduled...
Feb 12 14:08:03 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 1 of 5 (Device Prepare) started...
Feb 12 14:08:03 ivy NetworkManager[312]: <info> (wlp0s19f2u2): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Feb 12 14:08:03 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 2 of 5 (Device Configure) scheduled...
Feb 12 14:08:03 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 1 of 5 (Device Prepare) complete.
Feb 12 14:08:03 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 2 of 5 (Device Configure) starting...
Feb 12 14:08:03 ivy NetworkManager[312]: <info> (wlp0s19f2u2): device state change: prepare -> config (reason 'none') [40 50 0]
Feb 12 14:08:03 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: (wifi) connection 'wifi-loco' has security, and secrets exist.
Feb 12 14:08:03 ivy NetworkManager[312]: <info> Config: added 'ssid' value 'loco'
Feb 12 14:08:03 ivy NetworkManager[312]: <info> Config: added 'scan_ssid' value '1'
Feb 12 14:08:03 ivy NetworkManager[312]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Feb 12 14:08:03 ivy NetworkManager[312]: <info> Config: added 'psk' value '<omitted>'
Feb 12 14:08:03 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: Stage 2 of 5 (Device Configure) complete.
Feb 12 14:08:03 ivy NetworkManager[312]: <info> Config: set interface ap_scan to 1
Feb 12 14:08:03 ivy NetworkManager[312]: <info> (wlp0s19f2u2): supplicant interface state: inactive -> scanning
Feb 12 14:08:04 ivy kernel: wlp0s19f2u2: authenticate with 08:86:3b:b3:74:be
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): supplicant interface state: scanning -> authenticating
Feb 12 14:08:04 ivy kernel: wlp0s19f2u2: send auth to 08:86:3b:b3:74:be (try 1/3)
Feb 12 14:08:04 ivy kernel: wlp0s19f2u2: authenticated
Feb 12 14:08:04 ivy kernel: wlp0s19f2u2: associate with 08:86:3b:b3:74:be (try 1/3)
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): supplicant interface state: authenticating -> associating
Feb 12 14:08:04 ivy kernel: wlp0s19f2u2: RX AssocResp from 08:86:3b:b3:74:be (capab=0x411 status=0 aid=4)
Feb 12 14:08:04 ivy kernel: wlp0s19f2u2: associated
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): supplicant interface state: associating -> associated
Feb 12 14:08:04 ivy kernel: wlp0s19f2u2: deauthenticating from 08:86:3b:b3:74:be by local choice (Reason: 1=UNSPECIFIED)
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): supplicant interface state: associated -> 4-way handshake
Feb 12 14:08:04 ivy NetworkManager[312]: <warn> Connection disconnected (reason -1)
Feb 12 14:08:04 ivy kernel: cfg80211: Calling CRDA to update world regulatory domain
Feb 12 14:08:04 ivy kernel: cfg80211: World regulatory domain updated:
Feb 12 14:08:04 ivy kernel: cfg80211: DFS Master region: unset
Feb 12 14:08:04 ivy kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Feb 12 14:08:04 ivy kernel: cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Feb 12 14:08:04 ivy kernel: cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Feb 12 14:08:04 ivy kernel: cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
Feb 12 14:08:04 ivy kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Feb 12 14:08:04 ivy kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Feb 12 14:08:04 ivy kernel: cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
Feb 12 14:08:04 ivy kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Feb 12 14:08:04 ivy kernel: cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
Feb 12 14:08:04 ivy kernel: cfg80211: Calling CRDA for country: IN
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): supplicant interface state: 4-way handshake -> disconnected
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): Activation: (wifi) disconnected during association, asking for new key
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): device state change: config -> need-auth (reason 'supplicant-disconnect') [5
Feb 12 14:08:04 ivy kernel: cfg80211: Regulatory domain changed to country: IN
Feb 12 14:08:04 ivy kernel: cfg80211: DFS Master region: JP
Feb 12 14:08:04 ivy kernel: cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
Feb 12 14:08:04 ivy kernel: cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
Feb 12 14:08:04 ivy kernel: cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
Feb 12 14:08:04 ivy kernel: cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
Feb 12 14:08:04 ivy kernel: cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
Feb 12 14:08:04 ivy NetworkManager[312]: <warn> (wlp0s19f2u2): No agents were available for this request.
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
Feb 12 14:08:04 ivy NetworkManager[312]: <warn> (wlp0s19f2u2): Activation: failed for connection 'wifi-loco'
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): device state change: failed -> disconnected (reason 'none') [120 30 0]
Feb 12 14:08:04 ivy NetworkManager[312]: <info> (wlp0s19f2u2): deactivating device (reason 'none') [0]
Feb 12 14:08:05 ivy NetworkManager[312]: <info> (wlp0s19f2u2): supplicant interface state: disconnected -> inactiveMy system config is:
wifi-adapter:
Bus 002 Device 002: ID 0411:01a2 BUFFALO INC. (formerly MelCo., Inc.) WLI-UC-GNM Wireless LAN Adapter [Ralink RT8070]
uname -a
Linux ivy 3.16.3-1-ARCH #1 SMP PREEMPT Wed Sep 17 22:00:02 CEST 2014 i686 GNU/LinuxI have tried with netctl too and its the same.
Current service state systemctl -t service:
UNIT LOAD ACTIVE SUB DESCRIPTION
avahi-daemon.service loaded active running Avahi mDNS/DNS-SD Stack
dbus.service loaded active running D-Bus System Message Bus
dhcpcd.service loaded active running dhcpcd on all interfaces
● dhcpcd@wlp0s19f2u2.service loaded failed failed dhcpcd on wlp0s19f2u2
● dhcpd4@vboxnet0.service loaded failed failed IPv4 DHCP server on vboxnet0
dkms.service loaded active exited Dynamic Kernel Modules System
getty@tty1.service loaded active running Getty on tty1
kmod-static-nodes.service loaded active exited Create list of required static device nodes for the current kernel
lvm2-lvmetad.service loaded active running LVM2 metadata daemon
lvm2-pvscan@8:6.service loaded active exited LVM2 PV scan on device 8:6
NetworkManager.service loaded active running Network Manager
nmbd.service loaded active running Samba NetBIOS name server
polkit.service loaded active running Authorization Manager
smbd.service loaded active running Samba SMB/CIFS server
sshd.service loaded active running OpenSSH Daemon
systemd-journal-flush.service loaded active exited Flush Journal to Persistent Storage
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-modules-load.service loaded active exited Load Kernel Modules
systemd-random-seed.service loaded active exited Load/Save Random Seed
systemd-remount-fs.service loaded active exited Remount Root and Kernel File Systems
systemd-rfkill@rfkill0.service loaded active exited Load/Save RF Kill Switch Status of rfkill0
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-tmpfiles-setup-dev.service loaded active exited Create Static Device Nodes in /dev
systemd-tmpfiles-setup.service loaded active exited Create Volatile Files and Directories
systemd-udev-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-update-utmp.service loaded active exited Update UTMP about System Boot/Shutdown
systemd-user-sessions.service loaded active exited Permit User Sessions
systemd-vconsole-setup.service loaded active exited Setup Virtual Console
user@0.service loaded active running User Manager for UID 0
user@1000.service loaded active running User Manager for UID 1000
wpa_supplicant.service loaded active running WPA supplicantI only read that downgrading some packages may be the solution? But at this point not sure what and how to.
-- Thanks
Offline
I had a similar issue six to eight months ago.
Wifi would fail on every upgrade of wpa_supplicant.
I solved it by hanging on to 2.1.x until recently
Try downloading a number of older versions and see if any work.
https://seblu.net/a/arm/packages/w/wpa_supplicant/
Run
pacman -U filenameto install a downloaded package
Offline