Arch Linux

zx

Member

Registered: 2014-09-17

Posts: 22

[SOLVED] VLAN isn't linked (created)

Hi,
I created files for VLAN, but vlan isn't linked (creted) on boot up.
devices:
1. lan0 - my internal lan IP 172.16.0.16
2. wan0 - external inet IP 192.168.123.16
3. wan0.brother - vlan, inet IP: 192.168.123.123

Files:

[root@rpi11 ~]# ls /etc/systemd/network/
00-lan0.network  10-wan0.network  11-wan0.brother.netdev  12-wan0.brother.network

10-wan0.network

[Match]
Name=wan0

[Address]
Address=192.168.123.16/24

[Network]
IPForward=yes
VLAN=wan0.brother

[Route]
Gateway=192.168.123.1

11-wan0.brother.netdev

[Netdev]
Name=wan0.brother
Kind=vlan

[VLAN]
Id=100

12-wan0.brother.network

[Match]
Name=wan0.brother

[Address]
Address=192.168.123.254/24

[Network]
IPForward=yes

After reboot inet devs are:

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host 
       valid_lft forever preferred_lft forever
2: lan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether b8:27:eb:f9:e4:44 brd ff:ff:ff:ff:ff:ff
    inet 172.16.0.16/16 brd 172.16.255.255 scope global lan0
       valid_lft forever preferred_lft forever
    inet6 fe80::ba27:ebff:fef9:e444/64 scope link 
       valid_lft forever preferred_lft forever
3: wan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
    link/ether 00:71:00:ff:05:7c brd ff:ff:ff:ff:ff:ff
    inet 192.168.123.16/24 brd 192.168.123.255 scope global wan0
       valid_lft forever preferred_lft forever
    inet6 fe80::271:ff:feff:57c/64 scope link 
       valid_lft forever preferred_lft forever

So wan0.brother isn't ceated, after manually exec of the command:

ip link add link wan0 name wan0.brother type vlan id 100

VLAN is created:

4: wan0.brother@wan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default 
    link/ether 00:71:00:ff:05:7c brd ff:ff:ff:ff:ff:ff
    inet 192.168.123.254/24 brd 192.168.123.255 scope global wan0.brother
       valid_lft forever preferred_lft forever
    inet6 fe80::271:ff:feff:57c/64 scope link tentative 
       valid_lft forever preferred_lft forever

What is missing in my configuration?
PS: I'm working on archlinux arm v6.

EDIT:
There was a bug in wiki.
Should be: [NetDev] instead of [Netdev]

Last edited by zx (2015-09-24 19:46:32)