Arch Linux

bharath1097

Member

Registered: 2010-12-03

Posts: 27

Auzentech X-studio 5.1 sound does not work every second boot.

Sound does not work for some reason every second time i boot. It works one time. Then it does not work after i reboot and again works if i reboot again.

I get this message in dmesg on every boot.

snd_ice1724 0000:04:07.0: No matching model found for ID 0xc3140417

Output of lspci -v

04:07.0 Multimedia audio controller: VIA Technologies Inc. VT1720/24 [Envy24PT/HT] PCI Multi-Channel Audio Controller (rev 01)
        Subsystem: MEDIATEK Corp. Device 1704
        Flags: bus master, medium devsel, latency 32, IRQ 21
        I/O ports at c080 [size=32]
        I/O ports at c000 [size=128]
        Capabilities: [80] Power Management version 1
        Kernel driver in use: snd_ice1724
        Kernel modules: snd_ice1724

Output of alsa information script
http://pastebin.com/kBCLHc6b

Last edited by bharath1097 (2015-05-12 03:58:36)

bharath1097

Member

Registered: 2010-12-03

Posts: 27

Re: Auzentech X-studio 5.1 sound does not work every second boot.

It works if i force the model as k8x800.

I am using this line in my /etc/modprobe.d/

options snd-ice1724 model=k8x800

bharath1097

Member

Registered: 2010-12-03

Posts: 27

Re: Auzentech X-studio 5.1 sound does not work every second boot.

I am getting the same problem even with forcing the model. It works one time and then it does not work the next time.

bharath1097

Member

Registered: 2010-12-03

Posts: 27

Re: Auzentech X-studio 5.1 sound does not work every second boot.

Can anyone tell me how i can reload the snd-ice1724 module with another model without rebooting ?

jasonwryan

Anarchist

From: .nz

Registered: 2009-05-09

Posts: 30,426

Website

Re: Auzentech X-studio 5.1 sound does not work every second boot.

man modprobe

---

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

bharath1097

Member

Registered: 2010-12-03

Posts: 27

Re: Auzentech X-studio 5.1 sound does not work every second boot.

i tried using modprobe. It is not allowing me to remove the module and reload it.
When i try to remove the module even if i give -f option, it is saying

modprobe: FATAL: Module snd_ice1724 is in use

bharath1097

Member

Registered: 2010-12-03

Posts: 27

Re: Auzentech X-studio 5.1 sound does not work every second boot.

adding the kernel parameter irqpoll to grub seems to have solved the problem. I have rebooted the system 5-6 times since i added that option and the sound always worked.

bharath1097

Member

Registered: 2010-12-03

Posts: 27

Re: Auzentech X-studio 5.1 sound does not work every second boot.

Even now sound is not working sometimes.

bharath1097

Member

Registered: 2010-12-03

Posts: 27

Re: Auzentech X-studio 5.1 sound does not work every second boot.

I got rid of the card.