You are not logged in.
Pages: 1
Hello,
I have kde 5 installed and experiencing high xorg releted cpu usage.
Can anyone help to figure what could cause this because it slows down my system.
Here are some info:
Top
287 root 20 0 289.6m 176.3m 23.8 3.0 8:52.06 S Xorg
545 mak 20 0 2970.5m 156.2m 5.3 2.6 2:03.62 S kwin_x11
594 mak 20 0 1343.3m 16.3m 4.0 0.3 0:14.02 S conky
634 mak 20 0 1343.3m 16.4m 3.3 0.3 0:16.29 R conky
9327 mak 20 0 498.6m 56.1m 3.3 0.9 0:07.70 S konsole
7 root 20 0 0.0m 0.0m 1.3 0.0 0:03.12 S rcu_preempt
14 root 20 0 0.0m 0.0m 1.3 0.0 0:18.53 S ksoftirqd/1
556 mak 20 0 4039.8m 265.2m 1.3 4.4 0:37.71 S plasmashell
Xorg.0.log
[ 13.460]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 13.460] X Protocol Version 11, Revision 0
[ 13.460] Build Operating System: Linux 4.0.4-2-ARCH x86_64
[ 13.460] Current Operating System: Linux myhost 4.1.3-1-ARCH #1 SMP PREEMPT Wed Jul 22 20:37:12 CEST 2015 x86_64
[ 13.460] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=5ab8b320-5a76-4425-ad91-2b2619242aa4 rw quiet
[ 13.460] Build Date: 17 July 2015 05:38:19PM
[ 13.460]
[ 13.460] Current version of pixman: 0.32.6
[ 13.460] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.460] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.460] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug 2 11:04:00 2015
[ 13.500] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.501] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.557] (==) No Layout section. Using the first Screen section.
[ 13.557] (==) No screen section available. Using defaults.
[ 13.557] (**) |-->Screen "Default Screen Section" (0)
[ 13.557] (**) | |-->Monitor "<default monitor>"
[ 13.558] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 13.558] (**) | |-->Device "Nvidia Card"
[ 13.558] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.558] (==) Automatically adding devices
[ 13.558] (==) Automatically enabling devices
[ 13.558] (==) Automatically adding GPU devices
[ 13.625] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.625] Entry deleted from font path.
[ 13.625] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.625] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.625] Entry deleted from font path.
[ 13.625] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.625] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 13.625] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.625] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 13.625] (II) Loader magic: 0x817d60
[ 13.625] (II) Module ABI versions:
[ 13.625] X.Org ANSI C Emulation: 0.4
[ 13.625] X.Org Video Driver: 19.0
[ 13.625] X.Org XInput driver : 21.1
[ 13.625] X.Org Server Extension : 9.0
[ 13.628] (EE) systemd-logind: failed to get session: PID 287 does not belong to any known session
[ 13.629] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 13.632] (--) PCI:*(0:1:0:0) 10de:0404:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
[ 13.632] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.743] (II) LoadModule: "glx"
[ 13.794] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 14.875] (II) Module glx: vendor="NVIDIA Corporation"
[ 14.875] compiled for 4.0.2, module version = 1.0.0
[ 14.876] Module class: X.Org Server Extension
[ 14.898] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
[ 14.908] (II) LoadModule: "nvidia"
[ 14.908] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 14.982] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 14.982] compiled for 4.0.2, module version = 1.0.0
[ 14.982] Module class: X.Org Video Driver
[ 14.990] (II) NVIDIA dlloader X Driver 340.76 Thu Jan 22 11:03:05 PST 2015
[ 14.990] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.005] (++) using VT number 1
[ 15.009] (II) Loading sub module "fb"
[ 15.009] (II) LoadModule: "fb"
[ 15.010] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 15.017] (II) Module fb: vendor="X.Org Foundation"
[ 15.017] compiled for 1.17.2, module version = 1.0.0
[ 15.017] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.017] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 15.017] (II) Loading sub module "wfb"
[ 15.017] (II) LoadModule: "wfb"
[ 15.025] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 15.063] (II) Module wfb: vendor="X.Org Foundation"
[ 15.063] compiled for 1.17.2, module version = 1.0.0
[ 15.063] ABI class: X.Org ANSI C Emulation, version 0.4
[ 15.063] (II) Loading sub module "ramdac"
[ 15.063] (II) LoadModule: "ramdac"
[ 15.063] (II) Module "ramdac" already built-in
[ 15.067] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 15.067] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 15.067] (==) NVIDIA(0): RGB weight 888
[ 15.067] (==) NVIDIA(0): Default visual is TrueColor
[ 15.067] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 15.067] (**) NVIDIA(0): Option "NoLogo" "true"
[ 15.067] (**) NVIDIA(0): Option "ConnectedMonitor" "DFP"
[ 15.068] (**) NVIDIA(0): Enabling 2D acceleration
[ 15.068] (**) NVIDIA(0): ConnectedMonitor string: "DFP"
[ 16.009] (II) NVIDIA(0): Using ConnectedMonitor string "DFP-0".
[ 16.036] (II) NVIDIA(0): Display (Acer AL2016W (DFP-0)) does not support NVIDIA 3D
[ 16.036] (II) NVIDIA(0): Vision stereo.
[ 16.037] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 16.039] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G84) at PCI:1:0:0 (GPU-0)
[ 16.039] (--) NVIDIA(0): Memory: 524288 kBytes
[ 16.039] (--) NVIDIA(0): VideoBIOS: 60.84.68.00.00
[ 16.039] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 16.042] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:1:0:0
[ 16.042] (--) NVIDIA(0): CRT-0
[ 16.042] (--) NVIDIA(0): CRT-1
[ 16.042] (--) NVIDIA(0): TV-0
[ 16.042] (--) NVIDIA(0): Acer AL2016W (DFP-0) (boot, connected)
[ 16.042] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 16.042] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[ 16.042] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[ 16.042] (--) NVIDIA(0): Acer AL2016W (DFP-0): Internal TMDS
[ 16.042] (--) NVIDIA(GPU-0): Acer AL2016W (DFP-0): 330.0 MHz maximum pixel clock
[ 16.043] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 16.043] (**) NVIDIA(0): device Acer AL2016W (DFP-0) (Using EDID frequencies has
[ 16.043] (**) NVIDIA(0): been enabled on all display devices.)
[ 16.048] (==) NVIDIA(0):
[ 16.048] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 16.048] (==) NVIDIA(0): will be used as the requested mode.
[ 16.048] (==) NVIDIA(0):
[ 16.049] (II) NVIDIA(0): Validated MetaModes:
[ 16.049] (II) NVIDIA(0): "DFP-0:nvidia-auto-select"
[ 16.049] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 16.101] (--) NVIDIA(0): DPI set to (99, 98); computed from "UseEdidDpi" X config
[ 16.101] (--) NVIDIA(0): option
[ 16.101] (--) Depth 24 pixmap format is 32 bpp
[ 16.101] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 16.105] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 16.105] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 16.105] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 16.105] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 16.105] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 16.105] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 16.105] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 16.105] (II) NVIDIA(0): Config Options in the README.
[ 16.108] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 16.184] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 16.184] (==) NVIDIA(0): Backing store enabled
[ 16.184] (==) NVIDIA(0): Silken mouse enabled
[ 16.185] (==) NVIDIA(0): DPMS enabled
[ 16.185] (II) Loading sub module "dri2"
[ 16.185] (II) LoadModule: "dri2"
[ 16.185] (II) Module "dri2" already built-in
[ 16.185] (II) NVIDIA(0): [DRI2] Setup complete
[ 16.185] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 16.185] (--) RandR disabled
[ 16.194] (II) Initializing extension GLX
[ 16.194] (II) Indirect GLX disabled.(II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 16.667] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.668] (II) LoadModule: "evdev"
[ 16.668] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 16.693] (II) Module evdev: vendor="X.Org Foundation"
[ 16.693] compiled for 1.17.1, module version = 2.9.2
[ 16.693] Module class: X.Org XInput Driver
[ 16.693] ABI class: X.Org XInput driver, version 21.0
[ 16.693] (II) Using input driver 'evdev' for 'Power Button'
[ 16.693] (**) Power Button: always reports core events
[ 16.693] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 16.693] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.693] (--) evdev: Power Button: Found keys
[ 16.693] (II) evdev: Power Button: Configuring as keyboard
[ 16.693] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
[ 16.693] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.693] (**) Option "xkb_rules" "evdev"
[ 16.693] (**) Option "xkb_model" "pc104"
[ 16.693] (**) Option "xkb_layout" "us"
[ 16.741] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.741] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.741] (II) Using input driver 'evdev' for 'Power Button'
[ 16.741] (**) Power Button: always reports core events
[ 16.741] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 16.741] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 16.741] (--) evdev: Power Button: Found keys
[ 16.741] (II) evdev: Power Button: Configuring as keyboard
[ 16.741] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
[ 16.741] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 16.741] (**) Option "xkb_rules" "evdev"
[ 16.741] (**) Option "xkb_model" "pc104"
[ 16.741] (**) Option "xkb_layout" "us"
[ 16.742] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 16.742] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 16.742] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.742] (**) Logitech USB Receiver: always reports core events
[ 16.742] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 16.793] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 16.793] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 16.793] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 16.793] (--) evdev: Logitech USB Receiver: Found relative axes
[ 16.793] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 16.793] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 16.793] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 16.793] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 16.793] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.793] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.0/0003:046D:C52F.0001/input/input1/event1"
[ 16.793] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 8)
[ 16.799] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 16.799] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 16.799] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 16.799] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 16.799] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 16.800] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 16.800] (II) No input driver specified, ignoring this device.
[ 16.800] (II) This device may have been added with another device file.
[ 16.801] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 16.801] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 16.801] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 16.801] (**) Logitech USB Receiver: always reports core events
[ 16.801] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 16.801] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc52f
[ 16.801] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 16.801] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 16.801] (--) evdev: Logitech USB Receiver: Found relative axes
[ 16.801] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 16.801] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 16.801] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 16.801] (--) evdev: Logitech USB Receiver: Found keys
[ 16.801] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 16.801] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 16.801] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 16.801] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 16.801] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 16.801] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.1/usb3/3-2/3-2:1.1/0003:046D:C52F.0002/input/input2/event2"
[ 16.801] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 9)
[ 16.801] (**) Option "xkb_rules" "evdev"
[ 16.801] (**) Option "xkb_model" "pc104"
[ 16.801] (**) Option "xkb_layout" "us"
[ 16.802] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 16.802] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 16.802] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 16.802] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 16.802] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 16.802] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 16.803] (II) config/udev: Adding input device UVC Camera (046d:0819) (/dev/input/event11)
[ 16.803] (**) UVC Camera (046d:0819): Applying InputClass "evdev keyboard catchall"
[ 16.803] (II) Using input driver 'evdev' for 'UVC Camera (046d:0819)'
[ 16.803] (**) UVC Camera (046d:0819): always reports core events
[ 16.803] (**) evdev: UVC Camera (046d:0819): Device: "/dev/input/event11"
[ 16.803] (--) evdev: UVC Camera (046d:0819): Vendor 0x46d Product 0x819
[ 16.803] (--) evdev: UVC Camera (046d:0819): Found keys
[ 16.803] (II) evdev: UVC Camera (046d:0819): Configuring as keyboard
[ 16.803] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.5/usb2/2-3/2-3:1.0/input/input11/event11"
[ 16.803] (II) XINPUT: Adding extended input device "UVC Camera (046d:0819)" (type: KEYBOARD, id 10)
[ 16.803] (**) Option "xkb_rules" "evdev"
[ 16.803] (**) Option "xkb_model" "pc104"
[ 16.803] (**) Option "xkb_layout" "us"
[ 16.804] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event5)
[ 16.804] (II) No input driver specified, ignoring this device.
[ 16.804] (II) This device may have been added with another device file.
[ 16.805] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event6)
[ 16.805] (II) No input driver specified, ignoring this device.
[ 16.805] (II) This device may have been added with another device file.
[ 16.805] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event7)
[ 16.805] (II) No input driver specified, ignoring this device.
[ 16.805] (II) This device may have been added with another device file.
[ 16.806] (II) config/udev: Adding input device HDA ATI SB Line Out (/dev/input/event8)
[ 16.806] (II) No input driver specified, ignoring this device.
[ 16.806] (II) This device may have been added with another device file.
[ 16.806] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event9)
[ 16.806] (II) No input driver specified, ignoring this device.
[ 16.806] (II) This device may have been added with another device file.
[ 16.807] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 16.807] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.807] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 16.807] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.807] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 16.807] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 16.807] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 16.807] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 16.807] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 16.807] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 16.807] (**) Option "xkb_rules" "evdev"
[ 16.807] (**) Option "xkb_model" "pc104"
[ 16.807] (**) Option "xkb_layout" "us"
[ 16.808] (II) config/udev: Adding input device PC Speaker (/dev/input/event10)
[ 16.808] (II) No input driver specified, ignoring this device.
[ 16.808] (II) This device may have been added with another device file.
[ 34.315] (II) NVIDIA(GPU-0): Using ConnectedMonitor string "DFP-0".
[ 34.344] (II) NVIDIA(GPU-0): Display (Acer AL2016W (DFP-0)) does not support NVIDIA 3D
[ 34.344] (II) NVIDIA(GPU-0): Vision stereo.
[ 40.579] (II) NVIDIA(GPU-0): Using ConnectedMonitor string "DFP-0".
[ 40.606] (II) NVIDIA(GPU-0): Display (Acer AL2016W (DFP-0)) does not support NVIDIA 3D
[ 40.606] (II) NVIDIA(GPU-0): Vision stereo.
[ 44.918] (II) NVIDIA(GPU-0): Using ConnectedMonitor string "DFP-0".
[ 44.954] (II) NVIDIA(GPU-0): Display (Acer AL2016W (DFP-0)) does not support NVIDIA 3D
[ 44.954] (II) NVIDIA(GPU-0): Vision stereo.
Last edited by jmak (2015-08-02 16:25:23)
Offline
Conky high-jacked my system.
I disabled conky at startup, it made no difference conky still kept running even after reboot.
I removed the .conkyrc file - conky still kept running.
I had to uninstall conky completely, which solved the high xorg usage problem.
My xorg CPU usage now 0.7 %
Offline
Pages: 1