[SOLVED] usb-N13 Device 005: ID 0b05:17ab trouble with connection

etognoni · 2015-08-15 09:23:16

this is notebook with usb-N13 Bus 004 Device 005: ID 0b05:17ab ASUSTek Computer, Inc. USB-N13 802.11n Network Adapter (rev. B1) [Realtek RTL8192CU]
to run wireless connection i modprob -r native laptop old atheros
and add driver:

modprobe -r ath5k && modprobe -r rtl8192cu &&  modprobe rtl8192cu swenc=1 
iw dev wlan1 set type ibss
[root@localhost enrico]# sudo ip link set wlan0 up
[root@localhost enrico]# wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant-adhoc.conf -D nl80211 -ddt

This is the output -dddt:
http://pastebin.com/6VAGcc9d
i Installed this:

aur/8192cu-dkms v4.0.2_9000-8 [installed] (62)
    Driver for Realtek RTL8188CUS (8188C, 8192C) chipset wireless cards

This is wpa ad-hoc file conf:

[root@localhost enrico]# cat /etc/wpa_supplicant/wpa_supplicant-adhoc.conf 
# /etc/wpa_supplicant-adhoc.conf
ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel

# use 'ap_scan=2' on all devices connected to the network
ap_scan=2[

network={
	ssid="stoccafisso"
	key_mgmt=WPA-PSK
	proto=RSN
	psk="1q2w3e4r5t6y7u8i"
	mode=1
	frequency=2412
	pairwise=CCMP
	group=CCMP
}

this is other side :

This is the client

lspci -k
Network controller: Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
        DeviceName: Atheros WLAN Atheros Marilyn HB125 1x1 802.11bgn
        Subsystem: Hewlett-Packard Company AR9485/HB125 802.11bgn 1×1 Wi-Fi Adapter
        Kernel driver in use: ath9k
        Kernel modules: ath9

iwconfig
wlo1      IEEE 802.11bgn  ESSID:off/any  
          Mode:Managed  Access Point: Not-Associated   Tx-Power=off   
          Retry short limit:7   RTS thr:off   Fragment thr:off
          Power Management:off

At this point i run 2 script, i remove the laptop wireless device since i have 2 usb-n13 i suppose once is solved for 1 is for both.

cat up.sh 
modprobe -r ath9k && modprobe -r rtl8192cu &&  modprobe rtl8192cu swenc=1
rfkill unblock all
ip link set dev wlo1 up

wlo1* is changed now is a bit more complex depending on wich usb now is: wlp0s20u2 or similar

cat wpa.sh 
wpa_supplicant -dddt -i wlo1 -c /etc/wpa_supplicant/example.conf -D nl80211,wext

where example.conf is:

# /etc/wpa_supplicant/example.conf
ctrl_interface=DIR=/run/wpa_supplicant GROUP=wheel

# use 'ap_scan=2' on all devices connected to the network
ap_scan=2

# access point network with RSN
network={
	ssid="stoccafisso"
	key_mgmt=WPA-PSK
	proto=RSN
	psk="1q2w3e4r5t6y7u8i"
	mode=2
	frequency=2412
	pairwise=CCMP
	group=CCMP
}

this is head -n1000 output of wpa_supplicant -dddt:

http://sprunge.us/EaBJ

Im blocked here, i cant get connection, i need help

thanks you for help ciao

Last edited by etognoni (2015-08-18 15:54:49)

jasonwryan · 2015-08-15 09:32:50

Please use code tags when pasting to the boards: https://wiki.archlinux.org/index.php/Fo … s_and_code

...and include an actual question: https://wiki.archlinux.org/index.php/Fo … ow_to_post

etognoni · 2015-08-18 15:53:38

if the device wireless is on, and you know names (wlan0 and wlo1 in this case are devices wireless ppp0 is internet connection device)
you can create access point with:

create_ap wlan0 ppp0 stoccafisso 1q2w3e4r5t6y7u8i9o0p # crea access point and manage IP

To access internet from client:

wpa_supplicant -B -f wpalog -D nl80211 -i wlo1 -c <(wpa_passphrase "stoccafisso" "1q2w3e4r5t6y7u8i9o0p") # client to connect access point
dhclient wlo1 # get IP for client

ciao e buon linux

Arch Linux

#1 2015-08-15 09:23:16

[SOLVED] usb-N13 Device 005: ID 0b05:17ab trouble with connection

#2 2015-08-15 09:32:50

Re: [SOLVED] usb-N13 Device 005: ID 0b05:17ab trouble with connection

#3 2015-08-18 15:53:38

Re: [SOLVED] usb-N13 Device 005: ID 0b05:17ab trouble with connection

Board footer