You are not logged in.

#1 2016-01-12 06:59:52

dviktor
Member
Registered: 2015-10-18
Posts: 51

PC doesn't power down completely

Hey all!

Some days ago I've switched from outdated monstrous FreeBSD 9 to the Arch on my small home fileserver. With this switch an old good problem appeared again. When I have FreeBSD 7 on that machine shutdowning it via pwr button or `shutdown` command hasn't worked at all: hard drives were synced, but fans were still spinning. Only `halt` command worked. When I upgraded my serv to the FreeBSD 9 the problem disappeared. Now I've installed Arch and the same problem again: if I power down my computer via pwr button or `shutdown` (or even `halt`) the message 'reboot: power down' appears on the screen, hdd's syncs but power isn't fully shuts down because fans are still spinning and monitor backlight glows. `reboot` works fine though.

I've googled forum a lot but with no luck. What have I tried:
1) shutdown hook in mkinitcpio.conf
2) acpi=force in the kernel command-line
3) acpi and acpid installation
4) halt command
5) poweroff command

Offline

#2 2016-01-20 14:10:50

dviktor
Member
Registered: 2015-10-18
Posts: 51

Re: PC doesn't power down completely

WOL is disabled in BIOS
Power restore option is set to Last State mode
I've tried both ACPI S1 and S3 states but no positive result

Offline

#3 2016-01-21 07:06:31

x33a
Forum Moderator
Registered: 2009-08-15
Posts: 3,391
Website

Re: PC doesn't power down completely

Maybe you should post your hardware details so that people have more information to work with.

Offline

#4 2016-01-21 08:26:59

dviktor
Member
Registered: 2015-10-18
Posts: 51

Re: PC doesn't power down completely

lspci:

00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port (rev 02)
00:03.0 Communication controller: Intel Corporation 82G33/G31/P35/P31 Express MEI Controller (rev 02)
00:19.0 Ethernet controller: Intel Corporation 82566DC-2 Gigabit Network Connection (rev 02)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 02)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 02)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 02)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 02)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 (rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5 (rev 02)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 02)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller (rev 02)
00:1f.2 RAID bus controller: Intel Corporation SATA Controller [RAID mode] (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
01:00.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV570 [Radeon X1950 PRO] (rev 9a)
01:00.1 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] RV570 [Radeon X1950 PRO] (Secondary) (rev 9a)
03:00.0 IDE interface: Marvell Technology Group Ltd. 88SE6101/6102 single-port PATA133 interface (rev b2)
07:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]

lsusb:

Bus 008 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

lscpu:

Architecture:          x86_64
CPU op-mode(s):        32-bit, 64-bit
Byte Order:            Little Endian
CPU(s):                2
On-line CPU(s) list:   0,1
Thread(s) per core:    1
Core(s) per socket:    2
Socket(s):             1
NUMA node(s):          1
Vendor ID:             GenuineIntel
CPU family:            6
Model:                 15
Model name:            Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz
Stepping:              13
CPU MHz:               2200.000
CPU max MHz:           2200,0000
CPU min MHz:           1200,0000
BogoMIPS:              4402.66
L1d cache:             32K
L1i cache:             32K
L2 cache:              2048K
NUMA node0 CPU(s):     0,1
Flags:                 fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx lm constant_tsc arch_perfmon pebs bts rep_good nopl aperfmperf pni dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm lahf_lm dtherm

UPS is not the case of the problem because even without it problem still persists

What extra info should i provide?

Offline

#5 2016-01-21 08:32:31

x33a
Forum Moderator
Registered: 2009-08-15
Posts: 3,391
Website

Re: PC doesn't power down completely

Motherboard model.

Offline

#6 2016-01-21 09:16:51

TheSaint
Member
From: my computer
Registered: 2007-08-19
Posts: 1,380

Re: PC doesn't power down completely

# journalctl -b1

. pastebin.com or file hosting would be preferred smile


do it good first, it will be faster than do it twice the saint wink

Offline

#7 2016-01-21 09:28:24

dviktor
Member
Registered: 2015-10-18
Posts: 51

Re: PC doesn't power down completely

full lshw output here
detailed motherboard info here
journalctl

Offline

#8 2016-01-21 10:40:05

x33a
Forum Moderator
Registered: 2009-08-15
Posts: 3,391
Website

Re: PC doesn't power down completely

@dviktor,

Here are some results for your motherboard. https://encrypted.google.com/search?hl= … t+shutdown

One of particular interest: https://communities.intel.com/thread/98 … 0&tstart=0

Essentially, it could be related to your BIOS.

Offline

#9 2016-01-21 10:52:28

dviktor
Member
Registered: 2015-10-18
Posts: 51

Re: PC doesn't power down completely

Reboot just works fine, the only problem is shutdown process. As I said earlier FreeBSD 7 also have this problem but FreeBSD 9 haven't. Also I've tried Scientific Linux 6, Fedora 10-17, Debian 4 and Ubuntu 7.10, 8.04 - all worked fine! I suspect that systemd is the case of the problem...

Offline

#10 2016-01-21 10:53:47

x33a
Forum Moderator
Registered: 2009-08-15
Posts: 3,391
Website

Re: PC doesn't power down completely

If you feel systemd is the case of the problem then give some other init system such as OpenRC a try, for testing purpose.

Offline

#11 2016-01-21 10:59:04

dviktor
Member
Registered: 2015-10-18
Posts: 51

Re: PC doesn't power down completely

I'll try to update BIOS and report the results

EDIT
BIOS update didn't solved the problem

Last edited by dviktor (2016-01-21 12:01:32)

Offline

#12 2016-01-21 16:49:11

ukhippo
Member
From: Non-paged pool
Registered: 2014-02-21
Posts: 306

Re: PC doesn't power down completely

A shot in the dark, but try blacklisting mei_me

Offline

#13 2016-01-21 18:58:25

dviktor
Member
Registered: 2015-10-18
Posts: 51

Re: PC doesn't power down completely

now i have broken bios after unsuccessful upgrade. i'll try as soon as possible

Offline

Board footer

Powered by FluxBB