You are not logged in.

Pages: 1

#1 2016-01-28 13:43:53

nXXo
Member
Registered: 2016-01-20
Posts: 11

USB keyboar problem

Hi folks thank you for the beautiful forums and sorry for my bad English it's not my first language tongue

I have a problem with my USB keyboard when I reboot, maybe 1 to 10 I need to disconnect my USB keyboard and reconnect because my keyboard doesn’t work on the display manager. I have an error message in my journactl. It's my first install of Arch i love this distro 

-- Reboot --
jan 28 07:39:46 arch kernel: usb 1-3: 2:0: cannot get min/max values for control 2 (id 2)
jan 28 07:39:46 arch kernel: usb 1-3: 5:0: cannot get min/max values for control 2 (id 5)
jan 28 07:39:51 arch kernel: hid-generic 0003:046D:0A1F.0001: usb_submit_urb(ctrl) failed: -19

and the code of my demsg

input/input11
[    3.330797] logitech-hidpp-device 0003:046D:4013.0007: input,hidraw1: USB HID v1.11 Mouse [Logitech M525] on usb-0000:00:14.0-14:1
[    3.332412] mousedev: PS/2 mouse device common for all mice
[    3.465070] usb 1-3: USB disconnect, device number 3
[    5.273058] random: nonblocking pool is initialized
[    5.273849] alx 0000:08:00.0 enp8s0: NIC Up: 1 Gbps Full
[    5.274064] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[    8.461300] usb 1-3: 2:0: cannot get min/max values for control 2 (id 2) <--------------------------------------------------------------------------------------------------------------------------------------------------------
[    8.461328] usb 1-3: 5:0: cannot get min/max values for control 2 (id 5) <---------------------------------------------------------------------------------------------------------------------------------------------------------
[    8.462322] usbcore: registered new interface driver snd-usb-audio
[   13.213250] hid-generic 0003:046D:0A1F.0001: usb_submit_urb(ctrl) failed: -19 <----------------------------------------------------------------------------------------------------------------------------------------------
[   13.213307] hid-generic 0003:046D:0A1F.0001: timeout initializing reports
[   13.213509] input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.3/0003:046D:0A1F.0001/input/input12
[   13.267180] hid-generic 0003:046D:0A1F.0001: input,hiddev0,hidraw2: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:14.0-3/input3
[   13.267453] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:0750.0002/input/input13
[   13.353398] hid-generic 0003:045E:0750.0002: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-1.2/input0
[   13.354577] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:045E:0750.0003/input/input14
[   13.406700] hid-generic 0003:045E:0750.0003: input,hidraw3: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-1.2/input1
[   13.430094] usb 1-1.2: USB disconnect, device number 4
[   13.579741] usb 1-3: new full-speed USB device number 6 using xhci_hcd
[   15.127370] usb 1-3: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[   15.145433] input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.3/0003:046D:0A1F.0008/input/input15
[   15.196256] hid-generic 0003:046D:0A1F.0008: input,hiddev0,hidraw2: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:14.0-3/input3
[   15.475889] usb 1-13: new low-speed USB device number 7 using xhci_hcd
[   15.656604] usb 1-13: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[   15.656615] usb 1-13: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[   15.660618] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:045E:0750.0009/input/input16
[   15.712801] hid-generic 0003:045E:0750.0009: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-13/input0
[   15.718522] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:045E:0750.000A/input/input17
[   15.769233] hid-generic 0003:045E:0750.000A: input,hidraw4: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-13/input1
[   25.215543] fuse init (API version 7.23)

thanks you very much for your help

Last edited by nXXo (2016-01-28 13:45:40)

Offline

#2 2016-01-28 13:47:33

olive
Member
From: Belgium
Registered: 2008-06-22
Posts: 1,490

Re: USB keyboar problem

If I understand you correctly, the keyboard does not work on the display manager when you boot, but works once the system is booted. It is most probably due to the BIOS/UEFI not doing a full initialization of the hardware. Try to look in the firmware for an option named something like "Fast boot" and disable it.

Offline

#3 2016-01-28 13:57:05

nXXo
Member
Registered: 2016-01-20
Posts: 11

Re: USB keyboar problem

the problem is intermittent, it did that about 1 out of 10 times when I wrote in slim, my keyboard does not work, I need to disconnect and reconnect to see it working again, the fast boot is disable
same problem too if I put the keyboard in another USB port

Offline

#4 2016-01-28 16:11:31

nXXo
Member
Registered: 2016-01-20
Posts: 11

Re: USB keyboar problem

nobody sad

Offline

#5 2016-01-28 16:33:49

WorMzy
Administrator
From: Scotland
Registered: 2010-06-16
Posts: 13,408
Website

Re: USB keyboar problem

Please post the full dmesg output.

https://bbs.archlinux.org/viewtopic.php?id=57855

EDIT: And please don't bump.

Last edited by WorMzy (2016-01-28 16:37:16)

Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD

Making lemonade from lemons since 2015.

Online

#6 2016-01-28 16:49:57

nXXo
Member
Registered: 2016-01-20
Posts: 11

Re: USB keyboar problem

No problem thx you  very much mister


[    0.000000] microcode: CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.3.3-3-ARCH (builduser@tobias) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Wed Jan 20 08:12:23 CET 2016
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6889f64c-f2f3-4d5f-bf0d-c6e96efaecfc rw quiet
[    0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 0x240 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ca4a9fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ca4aa000-0x00000000ca4b0fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ca4b1000-0x00000000cb19ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000cb1a0000-0x00000000cb6ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000cb6cd000-0x00000000de324fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de325000-0x00000000de379fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000de37a000-0x00000000de3befff] usable
[    0.000000] BIOS-e820: [mem 0x00000000de3bf000-0x00000000de4f4fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000de4f5000-0x00000000deffefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000defff000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000021effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: To Be Filled By O.E.M. To Be Filled By O.E.M./Z97 OC Formula, BIOS P1.80 05/13/2015
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x21f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0000000000 mask 7E00000000 write-back
[    0.000000]   1 base 0200000000 mask 7FF0000000 write-back
[    0.000000]   2 base 0210000000 mask 7FF8000000 write-back
[    0.000000]   3 base 0218000000 mask 7FFC000000 write-back
[    0.000000]   4 base 021C000000 mask 7FFE000000 write-back
[    0.000000]   5 base 021E000000 mask 7FFF000000 write-back
[    0.000000]   6 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: update [mem 0xe0000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fd2b0-0x000fd2bf] mapped at [ffff8800000fd2b0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[    0.000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[    0.000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x21ee00000-0x21effffff]
[    0.000000]  [mem 0x21ee00000-0x21effffff] page 2M
[    0.000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x200000000-0x21edfffff]
[    0.000000]  [mem 0x200000000-0x21edfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x1e0000000-0x1ffffffff]
[    0.000000]  [mem 0x1e0000000-0x1ffffffff] page 1G
[    0.000000] init_memory_mapping: [mem 0x00100000-0xca4a9fff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0x3fffffff] page 2M
[    0.000000]  [mem 0x40000000-0xbfffffff] page 1G
[    0.000000]  [mem 0xc0000000-0xca3fffff] page 2M
[    0.000000]  [mem 0xca400000-0xca4a9fff] page 4k
[    0.000000] init_memory_mapping: [mem 0xca4b1000-0xcb19ffff]
[    0.000000]  [mem 0xca4b1000-0xca5fffff] page 4k
[    0.000000]  [mem 0xca600000-0xcaffffff] page 2M
[    0.000000]  [mem 0xcb000000-0xcb19ffff] page 4k
[    0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xcb6cd000-0xde324fff]
[    0.000000]  [mem 0xcb6cd000-0xcb7fffff] page 4k
[    0.000000]  [mem 0xcb800000-0xde1fffff] page 2M
[    0.000000]  [mem 0xde200000-0xde324fff] page 4k
[    0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xde37a000-0xde3befff]
[    0.000000]  [mem 0xde37a000-0xde3befff] page 4k
[    0.000000] init_memory_mapping: [mem 0xdefff000-0xdeffffff]
[    0.000000]  [mem 0xdefff000-0xdeffffff] page 4k
[    0.000000] init_memory_mapping: [mem 0x100000000-0x1dfffffff]
[    0.000000]  [mem 0x100000000-0x1dfffffff] page 1G
[    0.000000] RAMDISK: [mem 0x3760c000-0x37afdfff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DE4C1080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DE4D2770 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000DE4C11A0 0115C9 (v02 ALASKA A M I    00000171 INTL 20120711)
[    0.000000] ACPI: FACS 0x00000000DE4F4F80 000040
[    0.000000] ACPI: APIC 0x00000000DE4D2880 000062 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DE4D28E8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DE4D2930 000539 (v01 PmRef  Cpu0Ist  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DE4D2E70 000B74 (v01 CpuRef CpuSsdt  00003000 INTL 20051117)
[    0.000000] ACPI: SSDT 0x00000000DE4D39E8 0001C7 (v01 PmRef  LakeTiny 00003000 INTL 20051117)
[    0.000000] ACPI: MCFG 0x00000000DE4D3BB0 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000DE4D3BF0 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
[    0.000000] ACPI: SSDT 0x00000000DE4D3C28 00036D (v01 SataRe SataTabl 00001000 INTL 20120711)
[    0.000000] ACPI: SSDT 0x00000000DE4D3F98 005A36 (v01 SaSsdt SaSsdt   00003000 INTL 20120711)
[    0.000000] ACPI: AAFT 0x00000000DE4D99D0 0007F0 (v01 ALASKA OEMAAFT  01072009 MSFT 00000097)
[    0.000000] ACPI: UEFI 0x00000000DE4DA1C0 000042 (v01 ALASKA A M I    01072009      00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000021effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x21eff8000-0x21effbfff]
[    0.000000]  [ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216600000-ffff88021e5fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000021effffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000ca4a9fff]
[    0.000000]   node   0: [mem 0x00000000ca4b1000-0x00000000cb19ffff]
[    0.000000]   node   0: [mem 0x00000000cb6cd000-0x00000000de324fff]
[    0.000000]   node   0: [mem 0x00000000de37a000-0x00000000de3befff]
[    0.000000]   node   0: [mem 0x00000000defff000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000021effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000021effffff]
[    0.000000] On node 0 totalpages: 2084307
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14137 pages used for memmap
[    0.000000]   DMA32 zone: 904759 pages, LIFO batch:31
[    0.000000]   Normal zone: 18368 pages used for memmap
[    0.000000]   Normal zone: 1175552 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xca4aa000-0xca4b0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xcb1a0000-0xcb6ccfff]
[    0.000000] PM: Registered nosave memory: [mem 0xde325000-0xde379fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde3bf000-0xde4f4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xde4f5000-0xdeffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xdf000000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] PERCPU: Embedded 32 pages/cpu @ffff88021ec00000 s92824 r8192 d30056 u1048576
[    0.000000] pcpu-alloc: s92824 r8192 d30056 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2051717
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=6889f64c-f2f3-4d5f-bf0d-c6e96efaecfc rw quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8122876K/8337228K available (5666K kernel code, 937K rwdata, 1796K rodata, 1188K init, 1164K bss, 214352K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Build-time adjustment of leaf fanout to 64.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.000000] NR_IRQS:8448 nr_irqs:440 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 3198.925 MHz processor
[    0.000021] Calibrating delay loop (skipped), value calculated using timer frequency.. 6400.42 BogoMIPS (lpj=10663083)
[    0.000023] pid_max: default: 32768 minimum: 301
[    0.000026] ACPI: Core revision 20150818
[    0.012375] ACPI: 6 ACPI AML tables successfully acquired and loaded
[    0.012388] Security Framework initialized
[    0.012389] Yama: becoming mindful.
[    0.012750] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.013852] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.014316] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014324] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.014457] Initializing cgroup subsys io
[    0.014461] Initializing cgroup subsys memory
[    0.014465] Initializing cgroup subsys devices
[    0.014466] Initializing cgroup subsys freezer
[    0.014468] Initializing cgroup subsys net_cls
[    0.014469] Initializing cgroup subsys pids
[    0.014485] CPU: Physical Processor ID: 0
[    0.014485] CPU: Processor Core ID: 0
[    0.015257] mce: CPU supports 7 MCE banks
[    0.015266] CPU0: Thermal monitoring enabled (TM1)
[    0.015271] process: using mwait in idle threads
[    0.015273] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[    0.015274] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[    0.015508] Freeing SMP alternatives memory: 20K (ffffffff81a15000 - ffffffff81a1a000)
[    0.016250] ftrace: allocating 22571 entries in 89 pages
[    0.023207] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.056202] TSC deadline timer enabled
[    0.056204] smpboot: CPU0: Intel(R) Pentium(R) CPU G3258 @ 3.20GHz (family: 0x6, model: 0x3c, stepping: 0x3)
[    0.056220] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[    0.056234] ... version:                3
[    0.056235] ... bit width:              48
[    0.056236] ... generic registers:      8
[    0.056236] ... value mask:             0000ffffffffffff
[    0.056237] ... max period:             0000ffffffffffff
[    0.056238] ... fixed-purpose events:   3
[    0.056238] ... event mask:             00000007000000ff
[    0.086316] x86: Booting SMP configuration:
[    0.086317] .... node  #0, CPUs:      #1
[    0.098286] microcode: CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[    0.101132] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.101140] x86: Booted up 1 node, 2 CPUs
[    0.101141] smpboot: Total of 2 processors activated (12800.85 BogoMIPS)
[    0.102305] devtmpfs: initialized
[    0.103860] PM: Registering ACPI NVS region [mem 0xca4aa000-0xca4b0fff] (28672 bytes)
[    0.103862] PM: Registering ACPI NVS region [mem 0xde3bf000-0xde4f4fff] (1269760 bytes)
[    0.103920] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.103973] pinctrl core: initialized pinctrl subsystem
[    0.104008] RTC time: 12:39:38, date: 01/28/16
[    0.104087] NET: Registered protocol family 16
[    0.117789] cpuidle: using governor ladder
[    0.131129] cpuidle: using governor menu
[    0.131157] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.131159] ACPI: bus type PCI registered
[    0.131160] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.131203] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.131205] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.131209] pmd_set_huge: Cannot satisfy [mem 0xf0000000-0xf0200000] with a huge-page mapping due to MTRR override.
[    0.131318] PCI: Using configuration type 1 for base access
[    0.131479] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.131483] perf_event_intel: PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
[    0.144653] ACPI: Added _OSI(Module Device)
[    0.144654] ACPI: Added _OSI(Processor Device)
[    0.144654] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.144655] ACPI: Added _OSI(Processor Aggregator Device)
[    0.148395] ACPI: Executed 15 blocks of module-level executable AML code
[    0.151312] ACPI: Dynamic OEM Table Load:
[    0.151316] ACPI: SSDT 0xFFFF880214C11000 0003D3 (v01 PmRef  Cpu0Cst  00003001 INTL 20051117)
[    0.151861] ACPI: Dynamic OEM Table Load:
[    0.151865] ACPI: SSDT 0xFFFF880216017000 0005AA (v01 PmRef  ApIst    00003000 INTL 20051117)
[    0.152439] ACPI: Dynamic OEM Table Load:
[    0.152442] ACPI: SSDT 0xFFFF8802153DF800 000119 (v01 PmRef  ApCst    00003000 INTL 20051117)
[    0.153284] ACPI: Interpreter enabled
[    0.153290] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150818/hwxface-580)
[    0.153295] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150818/hwxface-580)
[    0.153309] ACPI: (supports S0 S3 S4 S5)
[    0.153310] ACPI: Using IOAPIC for interrupt routing
[    0.153352] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.161603] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.161607] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.161764] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.161859] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.161860] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.162120] PCI host bridge to bus 0000:00
[    0.162122] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.162123] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.162124] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.162125] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.162126] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.162127] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.162128] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.162129] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.162130] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.162131] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.162132] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfeafffff window]
[    0.162137] pci 0000:00:00.0: [8086:0c00] type 00 class 0x060000
[    0.162200] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[    0.162224] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.162282] pci 0000:00:01.0: System wakeup disabled by ACPI
[    0.162306] pci 0000:00:01.2: [8086:0c09] type 01 class 0x060400
[    0.162330] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
[    0.162390] pci 0000:00:01.2: System wakeup disabled by ACPI
[    0.162562] pci 0000:00:14.0: [8086:8cb1] type 00 class 0x0c0330
[    0.162584] pci 0000:00:14.0: reg 0x10: [mem 0xef200000-0xef20ffff 64bit]
[    0.162625] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.162661] pci 0000:00:14.0: System wakeup disabled by ACPI
[    0.162688] pci 0000:00:16.0: [8086:8cba] type 00 class 0x078000
[    0.162711] pci 0000:00:16.0: reg 0x10: [mem 0xef215000-0xef21500f 64bit]
[    0.162754] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.162823] pci 0000:00:1a.0: [8086:8cad] type 00 class 0x0c0320
[    0.162847] pci 0000:00:1a.0: reg 0x10: [mem 0xef213000-0xef2133ff]
[    0.162906] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.162943] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.162969] pci 0000:00:1c.0: [8086:8c90] type 01 class 0x060400
[    0.163018] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.163069] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.163094] pci 0000:00:1c.2: [8086:8c94] type 01 class 0x060400
[    0.163144] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.163193] pci 0000:00:1c.2: System wakeup disabled by ACPI
[    0.163217] pci 0000:00:1c.3: [8086:8c96] type 01 class 0x060400
[    0.163267] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.163315] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.163345] pci 0000:00:1d.0: [8086:8ca6] type 00 class 0x0c0320
[    0.163369] pci 0000:00:1d.0: reg 0x10: [mem 0xef212000-0xef2123ff]
[    0.163428] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.163465] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.163491] pci 0000:00:1f.0: [8086:8cc4] type 00 class 0x060100
[    0.163623] pci 0000:00:1f.2: [8086:8c82] type 00 class 0x010601
[    0.163640] pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
[    0.163646] pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
[    0.163652] pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
[    0.163658] pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
[    0.163663] pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
[    0.163670] pci 0000:00:1f.2: reg 0x24: [mem 0xef211000-0xef2117ff]
[    0.163689] pci 0000:00:1f.2: PME# supported from D3hot
[    0.163736] pci 0000:00:1f.3: [8086:8ca2] type 00 class 0x0c0500
[    0.163750] pci 0000:00:1f.3: reg 0x10: [mem 0xef210000-0xef2100ff 64bit]
[    0.163766] pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
[    0.163850] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.163882] pci 0000:02:00.0: [10de:0f00] type 00 class 0x030000
[    0.163899] pci 0000:02:00.0: reg 0x10: [mem 0xee000000-0xeeffffff]
[    0.163907] pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xe7ffffff 64bit pref]
[    0.163916] pci 0000:02:00.0: reg 0x1c: [mem 0xe8000000-0xe9ffffff 64bit pref]
[    0.163921] pci 0000:02:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.163927] pci 0000:02:00.0: reg 0x30: [mem 0xef000000-0xef07ffff pref]
[    0.163960] pci 0000:02:00.0: System wakeup disabled by ACPI
[    0.163988] pci 0000:02:00.1: [10de:0bea] type 00 class 0x040300
[    0.164004] pci 0000:02:00.1: reg 0x10: [mem 0xef080000-0xef083fff]
[    0.167834] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.167836] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.167837] pci 0000:00:01.2:   bridge window [mem 0xee000000-0xef0fffff]
[    0.167840] pci 0000:00:01.2:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.167899] acpiphp: Slot [1] registered
[    0.167903] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.167974] pci 0000:04:00.0: [1b21:1184] type 01 class 0x060400
[    0.168061] pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
[    0.174503] pci 0000:00:1c.2: PCI bridge to [bus 04-07]
[    0.174579] pci 0000:05:01.0: [1b21:1184] type 01 class 0x060400
[    0.174669] pci 0000:05:01.0: PME# supported from D0 D3hot D3cold
[    0.174721] pci 0000:05:05.0: [1b21:1184] type 01 class 0x060400
[    0.174810] pci 0000:05:05.0: PME# supported from D0 D3hot D3cold
[    0.174877] pci 0000:04:00.0: PCI bridge to [bus 05-07]
[    0.174927] pci 0000:05:01.0: PCI bridge to [bus 06]
[    0.174978] pci 0000:05:05.0: PCI bridge to [bus 07]
[    0.175069] pci 0000:08:00.0: [1969:e091] type 00 class 0x020000
[    0.175114] pci 0000:08:00.0: reg 0x10: [mem 0xef100000-0xef13ffff 64bit]
[    0.175125] pci 0000:08:00.0: reg 0x18: [io  0xd000-0xd07f]
[    0.175201] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.175236] pci 0000:08:00.0: System wakeup disabled by ACPI
[    0.181187] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.181190] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.181193] pci 0000:00:1c.3:   bridge window [mem 0xef100000-0xef1fffff]
[    0.181745] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.181778] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.181809] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.181840] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
[    0.181871] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.181902] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.181932] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.181963] ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 10 11 12 14 15)
[    0.182063] ACPI: Enabled 5 GPEs in block 00 to 3F
[    0.182133] vgaarb: setting as boot device: PCI:0000:02:00.0
[    0.182134] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.182135] vgaarb: loaded
[    0.182136] vgaarb: bridge control possible 0000:02:00.0
[    0.182201] PCI: Using ACPI for IRQ routing
[    0.184766] PCI: pci_cache_line_size set to 64 bytes
[    0.184804] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[    0.184805] e820: reserve RAM buffer [mem 0xca4aa000-0xcbffffff]
[    0.184806] e820: reserve RAM buffer [mem 0xcb1a0000-0xcbffffff]
[    0.184807] e820: reserve RAM buffer [mem 0xde325000-0xdfffffff]
[    0.184808] e820: reserve RAM buffer [mem 0xde3bf000-0xdfffffff]
[    0.184809] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.184810] e820: reserve RAM buffer [mem 0x21f000000-0x21fffffff]
[    0.184884] NetLabel: Initializing
[    0.184885] NetLabel:  domain hash size = 128
[    0.184885] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.184892] NetLabel:  unlabeled traffic allowed by default
[    0.184911] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.184914] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.186930] clocksource: Switched to clocksource hpet
[    0.190293] pnp: PnP ACPI init
[    0.190389] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[    0.190392] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.190584] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.190586] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190601] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.190626] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.190627] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.190680] system 00:04: [io  0x02a0-0x02af] has been reserved
[    0.190682] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190730] system 00:05: [io  0x0290-0x029f] has been reserved
[    0.190731] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190762] system 00:06: [io  0x04d0-0x04d1] has been reserved
[    0.190764] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.190865] pnp 00:07: [dma 0 disabled]
[    0.190895] pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.191208] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.191210] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.191211] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.191212] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.191213] system 00:08: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.191214] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.191215] system 00:08: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.191216] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.191218] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.191219] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.191220] system 00:08: [mem 0xeffe0000-0xeffeffff] has been reserved
[    0.191222] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.191331] pnp: PnP ACPI: found 9 devices
[    0.197018] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.197066] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.197071] pci 0000:00:01.2: PCI bridge to [bus 02]
[    0.197073] pci 0000:00:01.2:   bridge window [io  0xe000-0xefff]
[    0.197075] pci 0000:00:01.2:   bridge window [mem 0xee000000-0xef0fffff]
[    0.197077] pci 0000:00:01.2:   bridge window [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.197079] pci 0000:00:1c.0: PCI bridge to [bus 03]
[    0.197088] pci 0000:05:01.0: PCI bridge to [bus 06]
[    0.197100] pci 0000:05:05.0: PCI bridge to [bus 07]
[    0.197112] pci 0000:04:00.0: PCI bridge to [bus 05-07]
[    0.197124] pci 0000:00:1c.2: PCI bridge to [bus 04-07]
[    0.197132] pci 0000:00:1c.3: PCI bridge to [bus 08]
[    0.197134] pci 0000:00:1c.3:   bridge window [io  0xd000-0xdfff]
[    0.197137] pci 0000:00:1c.3:   bridge window [mem 0xef100000-0xef1fffff]
[    0.197144] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.197145] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.197146] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.197147] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[    0.197148] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[    0.197149] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[    0.197150] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[    0.197151] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff window]
[    0.197152] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff window]
[    0.197153] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff window]
[    0.197154] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.197155] pci_bus 0000:02: resource 1 [mem 0xee000000-0xef0fffff]
[    0.197156] pci_bus 0000:02: resource 2 [mem 0xe0000000-0xe9ffffff 64bit pref]
[    0.197158] pci_bus 0000:08: resource 0 [io  0xd000-0xdfff]
[    0.197159] pci_bus 0000:08: resource 1 [mem 0xef100000-0xef1fffff]
[    0.197179] NET: Registered protocol family 2
[    0.197289] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.197380] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.197463] TCP: Hash tables configured (established 65536 bind 65536)
[    0.197480] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.197497] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.197532] NET: Registered protocol family 1
[    0.230286] pci 0000:02:00.0: Video device with shadowed ROM
[    0.230297] pci 0000:08:00.0: set MSI_INTX_DISABLE_BUG flag
[    0.230300] PCI: CLS 64 bytes, default 64
[    0.230331] Unpacking initramfs...
[    0.282479] Freeing initrd memory: 5064K (ffff88003760c000 - ffff880037afe000)
[    0.282487] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.282489] software IO TLB [mem 0xda325000-0xde325000] (64MB) mapped at [ffff8800da325000-ffff8800de324fff]
[    0.282530] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[    0.282531] hw unit of domain pp0-core 2^-14 Joules
[    0.282532] hw unit of domain package 2^-14 Joules
[    0.282533] hw unit of domain dram 2^-14 Joules
[    0.282533] hw unit of domain pp1-gpu 2^-14 Joules
[    0.282608] microcode: CPU0 sig=0x306c3, pf=0x2, revision=0x1c
[    0.282613] microcode: CPU1 sig=0x306c3, pf=0x2, revision=0x1c
[    0.282643] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[    0.282669] Scanning for low memory corruption every 60 seconds
[    0.282800] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.283011] Initialise system trusted keyring
[    0.283065] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.284041] zbud: loaded
[    0.284174] VFS: Disk quotas dquot_6.6.0
[    0.284195] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.284282] Key type big_key registered
[    0.284422] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.284442] io scheduler noop registered
[    0.284444] io scheduler deadline registered
[    0.284463] io scheduler cfq registered (default)
[    0.285338] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.285343] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.285351] vesafb: mode is 640x480x32, linelength=2560, pages=0
[    0.285351] vesafb: scrolling: redraw
[    0.285353] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.285359] vesafb: framebuffer at 0xe9000000, mapped to 0xffffc90001000000, using 1216k, total 1216k
[    0.301895] Console: switching to colour frame buffer device 80x30
[    0.318378] fb0: VESA VGA frame buffer device
[    0.318392] intel_idle: MWAIT substates: 0x2120
[    0.318393] intel_idle: v0.4 model 0x3C
[    0.318393] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.318459] GHES: HEST is not enabled!
[    0.318502] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    0.339016] 00:07: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.339268] Linux agpgart interface v0.103
[    0.339418] rtc_cmos 00:02: RTC can wake from S4
[    0.339522] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.339544] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.339550] Intel P-state driver initializing.
[    0.339630] ledtrig-cpu: registered to indicate activity on CPUs
[    0.340399] NET: Registered protocol family 10
[    0.340776] NET: Registered protocol family 17
[    0.341569] registered taskstats version 1
[    0.341598] Loading compiled-in X.509 certificates
[    0.341642] zswap: loaded using pool lzo/zbud
[    0.342766]   Magic number: 0:478:684
[    0.342791] mem full: hash matches
[    0.342917] rtc_cmos 00:02: setting system clock to 2016-01-28 12:39:38 UTC (1453984778)
[    0.343102] PM: Hibernation image not present or could not be loaded.
[    0.343719] Freeing unused kernel memory: 1188K (ffffffff818ec000 - ffffffff81a15000)
[    0.343723] Write protecting the kernel read-only data: 8192k
[    0.344219] Freeing unused kernel memory: 464K (ffff88000158c000 - ffff880001600000)
[    0.344422] Freeing unused kernel memory: 252K (ffff8800017c1000 - ffff880001800000)
[    0.358212] random: systemd-tmpfile urandom read with 1 bits of entropy available
[    0.364653] [drm] Initialized drm 1.1.0 20060810
[    0.367733] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.367740] ACPI: Power Button [PWRB]
[    0.367805] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.367809] ACPI: Sleep Button [SLPB]
[    0.367864] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.367867] ACPI: Power Button [PWRF]
[    0.426734] ACPI: bus type USB registered
[    0.426761] usbcore: registered new interface driver usbfs
[    0.426771] usbcore: registered new interface driver hub
[    0.426792] usbcore: registered new device driver usb
[    0.427683] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.427690] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.428770] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.428777] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.429129] hub 1-0:1.0: USB hub found
[    0.429147] hub 1-0:1.0: 14 ports detected
[    0.432451] sdhci: Secure Digital Host Controller Interface driver
[    0.432454] sdhci: Copyright(c) Pierre Ossman
[    0.434217] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.434222] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.434398] hub 2-0:1.0: USB hub found
[    0.434410] hub 2-0:1.0: 6 ports detected
[    0.437046] i8042: PNP: No PS/2 controller found. Probing ports directly.
[    0.439552] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.439755] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.443589] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.443755] ehci-pci: EHCI PCI platform driver
[    0.443881] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.443887] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 3
[    0.443898] ehci-pci 0000:00:1a.0: debug port 2
[    0.447797] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.447807] ehci-pci 0000:00:1a.0: irq 16, io mem 0xef213000
[    0.450699] SCSI subsystem initialized
[    0.452102] libata version 3.00 loaded.
[    0.456956] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.457110] hub 3-0:1.0: USB hub found
[    0.457116] hub 3-0:1.0: 2 ports detected
[    0.457336] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.457341] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 4
[    0.457351] ehci-pci 0000:00:1d.0: debug port 2
[    0.461251] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.461262] ehci-pci 0000:00:1d.0: irq 23, io mem 0xef212000
[    0.470204] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.470349] hub 4-0:1.0: USB hub found
[    0.470354] hub 4-0:1.0: 2 ports detected
[    0.470593] ahci 0000:00:1f.2: version 3.0
[    0.470717] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1a impl SATA mode
[    0.470720] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst 
[    0.484091] scsi host0: ahci
[    0.484158] scsi host1: ahci
[    0.484214] scsi host2: ahci
[    0.484267] scsi host3: ahci
[    0.484319] scsi host4: ahci
[    0.484370] scsi host5: ahci
[    0.484404] ata1: DUMMY
[    0.484407] ata2: SATA max UDMA/133 abar m2048@0xef211000 port 0xef211180 irq 30
[    0.484408] ata3: DUMMY
[    0.484410] ata4: SATA max UDMA/133 abar m2048@0xef211000 port 0xef211280 irq 30
[    0.484412] ata5: SATA max UDMA/133 abar m2048@0xef211000 port 0xef211300 irq 30
[    0.484412] ata6: DUMMY
[    0.766797] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    0.776799] usb 4-1: new high-speed USB device number 2 using ehci-pci
[    0.793459] usb 1-1: new high-speed USB device number 2 using xhci_hcd
[    0.803456] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.806797] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.806814] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.807212] ata4.00: ATA-8: INTEL SSDSA2CW080G3, 4PC10362, max UDMA/133
[    0.807223] ata4.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.807694] ata4.00: configured for UDMA/133
[    0.807823] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.807833] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.807835] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.815624] ata2.00: ATA-8: MKNSSDCR120GB-7, 581ABBF0, max UDMA/133
[    0.815635] ata2.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    0.825583] ata2.00: configured for UDMA/133
[    0.829132] scsi 1:0:0:0: Direct-Access     ATA      MKNSSDCR120GB-7  BBF0 PQ: 0 ANSI: 5
[    0.832784] scsi 3:0:0:0: Direct-Access     ATA      INTEL SSDSA2CW08 0362 PQ: 0 ANSI: 5
[    0.860188] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    0.861535] ata5.00: ATA-8: ST9320325AS, 0001SDM1, max UDMA/133
[    0.861536] ata5.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    0.863581] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.863583] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.863584] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.865227] ata5.00: configured for UDMA/133
[    0.868709] scsi 4:0:0:0: Direct-Access     ATA      ST9320325AS      SDM1 PQ: 0 ANSI: 5
[    0.870173] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/111 GiB)
[    0.870199] sd 1:0:0:0: [sda] Write Protect is off
[    0.870200] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.870217] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.870217] sd 4:0:0:0: [sdc] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[    0.870235] sd 4:0:0:0: [sdc] Write Protect is off
[    0.870236] sd 4:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    0.870243] sd 4:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.870298] ata4.00: Enabling discard_zeroes_data
[    0.870303] sd 3:0:0:0: [sdb] 156301488 512-byte logical blocks: (80.0 GB/74.5 GiB)
[    0.870346] sd 3:0:0:0: [sdb] Write Protect is off
[    0.870347] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.870355] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.870474] ata4.00: Enabling discard_zeroes_data
[    0.870524]  sda: sda1 sda2
[    0.870635] sd 1:0:0:0: [sda] Attached SCSI disk
[    0.870708]  sdb: sdb1 sdb2
[    0.870784] ata4.00: Enabling discard_zeroes_data
[    0.870820] sd 3:0:0:0: [sdb] Attached SCSI disk
[    0.873166]  sdc: sdc1
[    0.873242] sd 4:0:0:0: [sdc] Attached SCSI disk
[    0.876428] hub 2-1:1.0: USB hub found
[    0.876543] hub 2-1:1.0: 4 ports detected
[    0.890606] hub 3-1:1.0: USB hub found
[    0.890713] hub 3-1:1.0: 6 ports detected
[    0.903978] hub 4-1:1.0: USB hub found
[    0.904106] hub 4-1:1.0: 8 ports detected
[    0.972091] hub 1-1:1.0: USB hub found
[    0.972230] hub 1-1:1.0: 4 ports detected
[    1.130031] usb 1-3: new full-speed USB device number 3 using xhci_hcd
[    1.279980] tsc: Refined TSC clocksource calibration: 3199.072 MHz
[    1.279982] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2e1cdd23e92, max_idle_ns: 440795220843 ns
[    1.364238] EXT4-fs (sdb2): mounted filesystem with ordered data mode. Opts: (null)
[    1.450004] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.452978] systemd[1]: systemd 228 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    1.453048] systemd[1]: Detected architecture x86-64.
[    1.453246] systemd[1]: Set hostname to <arch>.
[    1.526466] systemd[1]: Reached target Encrypted Volumes.
[    1.526504] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    1.526512] systemd[1]: Reached target Swap.
[    1.526531] systemd[1]: Listening on Journal Socket.
[    1.526574] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.526581] systemd[1]: Reached target Remote File Systems.
[    1.526593] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.526611] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    1.526623] systemd[1]: Listening on udev Kernel Socket.
[    1.526683] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.526702] systemd[1]: Listening on udev Control Socket.
[    1.526857] systemd[1]: Created slice User and Session Slice.
[    1.530995] systemd[1]: Created slice System Slice.
[    1.531048] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    1.531225] systemd[1]: Mounting POSIX Message Queue File System...
[    1.531237] systemd[1]: Reached target Slices.
[    1.531491] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[    1.533404] systemd[1]: Starting Apply Kernel Variables...
[    1.533613] systemd[1]: Starting Remount Root and Kernel File Systems...
[    1.533709] systemd[1]: Created slice system-getty.slice.
[    1.535144] systemd[1]: Mounting Debug File System...
[    1.535180] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.535411] systemd[1]: Starting Journal Service...
[    1.535756] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.535770] systemd[1]: Reached target Paths.
[    1.535990] systemd[1]: Starting Setup Virtual Console...
[    1.536508] systemd[1]: Mounting Huge Pages File System...
[    1.537041] systemd[1]: Mounting Configuration File System...
[    1.537683] systemd[1]: Started Create list of required static device nodes for the current kernel.
[    1.542619] systemd[1]: Started Setup Virtual Console.
[    1.543275] EXT4-fs (sdb2): re-mounted. Opts: discard
[    1.544417] systemd[1]: Mounted POSIX Message Queue File System.
[    1.544438] systemd[1]: Mounted Configuration File System.
[    1.544448] systemd[1]: Mounted Huge Pages File System.
[    1.544457] systemd[1]: Mounted Debug File System.
[    1.545158] systemd[1]: Started Apply Kernel Variables.
[    1.545255] systemd[1]: Started Remount Root and Kernel File Systems.
[    1.549726] systemd[1]: Starting Load/Save Random Seed...
[    1.550107] systemd[1]: Starting Create Static Device Nodes in /dev...
[    1.551541] systemd[1]: Starting udev Coldplug all Devices...
[    1.556654] systemd[1]: Started Load/Save Random Seed.
[    1.574270] systemd[1]: Started udev Coldplug all Devices.
[    1.589636] systemd[1]: Started Create Static Device Nodes in /dev.
[    1.589915] systemd[1]: Starting udev Kernel Device Manager...
[    1.589927] systemd[1]: Reached target Local File Systems (Pre).
[    1.593038] systemd[1]: Mounting /tmp...
[    1.593913] systemd[1]: Mounted /tmp.
[    1.652790] systemd[1]: Started udev Kernel Device Manager.
[    1.684446] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.703578] systemd[1]: Started Journal Service.
[    1.704264] hidraw: raw HID events driver (C) Jiri Kosina
[    1.711934] systemd-journald[160]: Received request to flush runtime journal from PID 1
[    1.726891] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[    1.735878] wmi: Mapper loaded
[    1.769288] ACPI Warning: SystemIO range 0x000000000000F000-0x000000000000F01F conflicts with OpRegion 0x000000000000F000-0x000000000000F00F (\_SB_.PCI0.SBUS.SMBI) (20150818/utaddress-254)
[    1.769292] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    1.771897] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    1.790474] snd_hda_intel 0000:02:00.1: Disabling MSI
[    1.790478] snd_hda_intel 0000:02:00.1: Handle VGA-switcheroo audio client
[    1.818329] alx 0000:08:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [d0:50:99:28:fc:2d]
[    1.824807] intel_rapl: Found RAPL domain package
[    1.824810] intel_rapl: Found RAPL domain core
[    1.824811] intel_rapl: Found RAPL domain dram
[    1.837215] iTCO_vendor_support: vendor-support=0
[    1.837729] alx 0000:08:00.0 enp8s0: renamed from eth0
[    1.838380] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    1.838402] iTCO_wdt: Found a 9 Series TCO device (Version=2, TCOBASE=0x1860)
[    1.838514] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.865014] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: discard
[    1.885690] nvidia: module license 'NVIDIA' taints kernel.
[    1.885692] Disabling lock debugging due to kernel taint
[    1.890019] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    1.890064] nvidia-nvlink: Nvlink Core is being initialized, major device number 246
[    1.890263] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:02:00.0 on minor 0
[    1.890266] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  358.16  Mon Nov 16 19:25:55 PST 2015
[    2.053594] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[    2.053861] IPv6: ADDRCONF(NETDEV_UP): enp8s0: link is not ready
[    2.279697] clocksource: Switched to clocksource tsc
[    2.470646] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.2/0000:02:00.1/sound/card0/input7
[    2.470673] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.2/0000:02:00.1/sound/card0/input8
[    2.470696] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.2/0000:02:00.1/sound/card0/input9
[    2.470718] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.2/0000:02:00.1/sound/card0/input10
[    2.680725] usb 1-3: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.702894] NVRM: Your system is not currently configured to drive a VGA console
[    2.702896] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[    2.702897] NVRM: requires the use of a text-mode VGA console. Use of other console
[    2.702897] NVRM: drivers including, but not limited to, vesafb, may result in
[    2.702898] NVRM: corruption and stability problems, and is not supported.
[    2.709322] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  358.16  Mon Nov 16 18:58:09 PST 2015
[    2.709585] nvidia-modeset: Allocated GPU:0 (GPU-0e08c6e7-f07b-5026-d4c0-02f6c93a5bd0) @ PCI:0000:02:00.0
[    2.759522] usb 1-1.2: new low-speed USB device number 4 using xhci_hcd
[    2.863454] usb 1-1.2: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[    2.863457] usb 1-1.2: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[    3.016140] usb 1-14: new full-speed USB device number 5 using xhci_hcd
[    3.214976] usbcore: registered new interface driver usbhid
[    3.214978] usbhid: USB HID core driver
[    3.216881] logitech-djreceiver 0003:046D:C52B.0006: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-14/input2
[    3.330731] input: Logitech M525 as /devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.2/0003:046D:C52B.0006/0003:046D:4013.0007/input/input11
[    3.330797] logitech-hidpp-device 0003:046D:4013.0007: input,hidraw1: USB HID v1.11 Mouse [Logitech M525] on usb-0000:00:14.0-14:1
[    3.332412] mousedev: PS/2 mouse device common for all mice
[    3.465070] usb 1-3: USB disconnect, device number 3
[    5.273058] random: nonblocking pool is initialized
[    5.273849] alx 0000:08:00.0 enp8s0: NIC Up: 1 Gbps Full
[    5.274064] IPv6: ADDRCONF(NETDEV_CHANGE): enp8s0: link becomes ready
[    8.461300] usb 1-3: 2:0: cannot get min/max values for control 2 (id 2)
[    8.461328] usb 1-3: 5:0: cannot get min/max values for control 2 (id 5)
[    8.462322] usbcore: registered new interface driver snd-usb-audio
[   13.213250] hid-generic 0003:046D:0A1F.0001: usb_submit_urb(ctrl) failed: -19
[   13.213307] hid-generic 0003:046D:0A1F.0001: timeout initializing reports
[   13.213509] input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.3/0003:046D:0A1F.0001/input/input12
[   13.267180] hid-generic 0003:046D:0A1F.0001: input,hiddev0,hidraw2: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:14.0-3/input3
[   13.267453] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:045E:0750.0002/input/input13
[   13.353398] hid-generic 0003:045E:0750.0002: input,hidraw2: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-1.2/input0
[   13.354577] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:045E:0750.0003/input/input14
[   13.406700] hid-generic 0003:045E:0750.0003: input,hidraw3: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-1.2/input1
[   13.430094] usb 1-1.2: USB disconnect, device number 4
[   13.579741] usb 1-3: new full-speed USB device number 6 using xhci_hcd
[   15.127370] usb 1-3: ep 0x83 - rounding interval to 64 microframes, ep desc says 80 microframes
[   15.145433] input: Logitech Logitech G930 Headset as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.3/0003:046D:0A1F.0008/input/input15
[   15.196256] hid-generic 0003:046D:0A1F.0008: input,hiddev0,hidraw2: USB HID v1.01 Device [Logitech Logitech G930 Headset] on usb-0000:00:14.0-3/input3
[   15.475889] usb 1-13: new low-speed USB device number 7 using xhci_hcd
[   15.656604] usb 1-13: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[   15.656615] usb 1-13: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[   15.660618] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:045E:0750.0009/input/input16
[   15.712801] hid-generic 0003:045E:0750.0009: input,hidraw3: USB HID v1.11 Keyboard [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-13/input0
[   15.718522] input: Microsoft Wired Keyboard 600 as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:045E:0750.000A/input/input17
[   15.769233] hid-generic 0003:045E:0750.000A: input,hidraw4: USB HID v1.11 Device [Microsoft Wired Keyboard 600] on usb-0000:00:14.0-13/input1
[   25.215543] fuse init (API version 7.23)

Last edited by nXXo (2016-01-28 17:12:39)

Offline

Pages: 1

Board footer

Powered by FluxBB