You are not logged in.
- Topics: Active | Unanswered
#1 2015-08-12 10:30:03
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Clicking/Poping sound from intel hda
In every laptop I came accross in my life I have experiance with this clicking sound. This happend when module have power_save mode to 1 as well as power_save_controller is Y. Issue was easy to mitigate all the time until I encounter kernel 4.1.4-*. Wheather I specify in grub
snd_hda_inte.power_save=0 snd_hda_intel.power_save_controller=Nor in modprobe situation is same. Kernel accept those values and powersave mode is off but again I hear clicking sound.
Right now the only solution is to do:
rmmod -f snd_hda_inteland
modprobe snd_hda_intel power_save=0,
I saw there were few changess in snd_intel module, as can be seen here:
https://www.kernel.org/pub/linux/kernel … eLog-4.1.4
My question: Does anyone experiance same issue? If so, I can debug this, and send report to kernel guys!
Last edited by markoer (2015-08-12 10:31:15)
Offline
#2 2015-08-12 10:54:30
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,330
- Website
Re: Clicking/Poping sound from intel hda
When do you hear the clicking/popping?
I haven't yet had time to investigate, but on my lenovo T450, I have been getting a pretty annoying click or pop when some programs start or stop playing sound. For me it is a single click when the program starts and another when it stops - almost like speakers were just plugged in then unplugged. A power saving mode seems like a potential explanation for these symptoms - so I'll try these settings later today. But is this the same sort of clicking you are hearing?
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#3 2015-08-12 11:38:02
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: Clicking/Poping sound from intel hda
Trilby wrote:
When do you hear the clicking/popping?
Whenever threre is start or stop access to my sound card. For example: start playing song/ stop playing song. There is no clicking sound while song is playing, only start/end reproduce this issue. There is also possiblity to delay POWER_SAVE mode in <sec>, but this doesn't help cos it's only delaying clicking for <sec>.
My laptop is "Acer Asipre V15 Nitro"
@Trilby
Yes, we have same issue, you can try with something like I wrote above, and If you still hear clicking noise, can you please revert kernel from 4.1.4-1 to 4.0.9-2 and perform some test like "playing/stopping audio/video clip" with power_save=0
thx
Offline
#4 2015-08-12 13:09:13
- Trilby
- Inspector Parrot
- Registered: 2011-11-29
- Posts: 30,330
- Website
Re: Clicking/Poping sound from intel hda
No luck here - I still have the clicking even when I rmmod and modprobe with the option set to zero. I will not be able to try downgradng for a while.
EDIT: FWIW, I actually don't get this very often it seems. I am getting this sound when running a program compiled against SFML with their audio module, but youtube or videos in my web browser do not produce this click. So in my case, it is likely an improper use/initialization of that library.
"UNIX is simple and coherent" - Dennis Ritchie; "GNU's Not Unix" - Richard Stallman
Offline
#5 2015-08-12 14:38:16
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 20,209
Re: Clicking/Poping sound from intel hda
Most of the laptops I've encountered use Intel audio, and I've not encountered pops. Stating Intel HDA does not provide the full picture. Intel HDA is an interface that does not provide actual audio output, but rather creates a standardized digital stream that gets passed to a second chip called a "codec". The codec takes the standardized serial stream and converts it into audio.
Take a look at the "file" /proc/asound/cards, it will tell you what intel HDA devices you have -- probably an HDMI and a PCH. For each card, there will be a directory under /proc/asound called cardn where n is 0,1,... Under those directories, there are "files" called codec#n (again, n=0,1,...) that contain information about the respective codec.
My system uses a Realtek ALC3241? How about your machines?
ewaller@turing ~ [1]1007 %ls /proc/asound
card0 card1 cards devices HDMI hwdep oss PCH pcm seq timers version
ewaller@turing ~ 1008 %cat /proc/asound/cards
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xb2610000 irq 32
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xb2614000 irq 33
ewaller@turing ~ 1009 %head /proc/asound/card0/codec\#0
Codec: Intel Haswell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862807
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
ewaller@turing ~ 1010 %head /proc/asound/card1/codec\#0
Codec: Realtek ALC3241
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0290
Subsystem Id: 0x103c2290
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
ewaller@turing ~ 1011 %Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
#6 2015-08-13 09:45:23
- 4e6
- Member
- From: Russia, Moscow
- Registered: 2011-01-25
- Posts: 4
- Website
Re: Clicking/Poping sound from intel hda
I am thinkpad x1 user, and I confirm hearing sometimes this clicking sound. After some experiments, I figured that clicking sound happens only once after boot or suspend, on the first access to sound device (when I start program that actually play sounds), regardless of power_save option.
My system uses Realtek ALC3232
> uname -rm
4.1.4-1-ARCH x86_64
> ls /proc/asound
card0 card1 cards devices HDMI hwdep modules oss PCH pcm seq timers version
> cat /proc/asound/cards
0 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xf0534000 irq 45
1 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xf0530000 irq 47
> head /proc/asound/card0/codec\#0
Codec: Realtek ALC3232
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0292
Subsystem Id: 0x17aa2218
Revision Id: 0x100001
No Modem Function Group found
Default PCM:
rates [0x5f0]: 32000 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
> head /proc/asound/card1/codec\#0
Codec: Intel Haswell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862807
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:Offline
#7 2015-08-13 11:53:17
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: Clicking/Poping sound from intel hda
@ewaller
My intel HDA uses Realtek ALC283. Interesting part is that on every execution of
cat /proc/asound/card1/codec\#0I enouncter popping noise.
In earlier kernel < 4.1.4-1 there was no such noise at all, so this is reason why I think is somehow kernel regression.
Offline
#8 2015-08-13 13:23:36
- mich41
- Member
- Registered: 2012-06-22
- Posts: 796
Re: Clicking/Poping sound from intel hda
markoer wrote:
Wheather I specify in grub
snd_hda_inte.power_save=0 snd_hda_intel.power_save_controller=Nor in modprobe situation is same. Kernel accept those values and powersave mode is off but again I hear clicking sound.
Right now the only solution is to do:
rmmod -f snd_hda_inteland
modprobe snd_hda_intel power_save=0
Does snd_hda_intel.power_save=0 work?
Also, note that files in /etc/modprobe.d/ must have .conf suffix or they are ignored.
Offline
#9 2015-08-14 15:47:28
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: Clicking/Poping sound from intel hda
mich41 wrote:
Does snd_hda_intel.power_save=0 work?
Also, note that files in /etc/modprobe.d/ must have .conf suffix or they are ignored.
Sure, /sys/module/snd_hda_intel/parameters/power_save is 0.
Strange thing is that after rmmod and modprobe, there is no poping sound anymore.
Here is alsa info when poping sound appears:
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.64
!!################################
!!Script ran on: Fri Aug 14 15:32:35 UTC 2015
!!Linux Distribution
!!------------------
Arch Linux \r (\l) DISTRIB_ID=Arch DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
!!---------------
Manufacturer: Acer
Product Name: Aspire VN7-591G
Product Version: V1.08
Firmware Version: V1.08
!!Kernel Information
!!------------------
Kernel release: 4.1.4-2-ck
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k4.1.4-2-ck
Library version: 1.0.29
Utilities version: 1.0.29
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/sbin/pulseaudio)
Running - Yes
Jack:
Installed - Yes (/usr/sbin/jackd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xd1710000 irq 35
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xd1714000 irq 34
!!PCI Soundcards installed in the system
!!--------------------------------------
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------
00:03.0 0403: 8086:0c0c (rev 06)
Subsystem: 1025:0926
--
00:1b.0 0403: 8086:8c20 (rev 05)
Subsystem: 1025:0926
!!Modprobe options (Sound related)
!!--------------------------------
snd_hda_intel: model=auto power_save=0
snd_hda_intel: model=auto
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : auto,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : -1
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : auto,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : -1
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Intel Haswell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862807
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled GenLevel KAE
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Control: name="ELD", index=0, device=8
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=03, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Realtek ALC283
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0283
Subsystem Id: 0x10250926
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x4d 0x4d]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC283 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=0, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00]
Connection: 1
0x0d
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC283 Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x27 0x27]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x12
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x90a601a0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xa, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x0c
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x40020008: [N/A] Line Out at Ext N/A
Conn = 1/4, Color = Unknown
DefAssociation = 0x0, Sequence = 0x8
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001373c: IN OUT HP EAPD Detect
Vref caps: HIZ 50 GRD 80 100
EAPD 0x2: EAPD
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40e00001: [N/A] Reserved at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=73
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0321101f: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c 0x0d*
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 2 Aug 14 17:22 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 7 Aug 14 17:22 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 6 Aug 14 17:22 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 10 Aug 14 17:22 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116, 3 Aug 14 17:23 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 4 Aug 14 17:23 /dev/snd/pcmC0D7p
crw-rw----+ 1 root audio 116, 5 Aug 14 17:23 /dev/snd/pcmC0D8p
crw-rw----+ 1 root audio 116, 9 Aug 14 17:23 /dev/snd/pcmC1D0c
crw-rw----+ 1 root audio 116, 8 Aug 14 17:23 /dev/snd/pcmC1D0p
crw-rw----+ 1 root audio 116, 1 Aug 14 17:22 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Aug 14 17:22 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Aug 14 17:22 .
drwxr-xr-x 3 root root 280 Aug 14 17:22 ..
lrwxrwxrwx 1 root root 12 Aug 14 17:22 pci-0000:00:03.0 -> ../controlC0
lrwxrwxrwx 1 root root 12 Aug 14 17:22 pci-0000:00:1b.0 -> ../controlC1
!!ALSA configuration files
!!------------------------
!!User specific config file (~/.asoundrc)
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
ctl.!default {
type pulse
}
# hdmi device
#defaults.pcm.device 3
!!System wide config file (/etc/asound.conf)
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
}
}
ctl.!default {
type pulse
fallback "sysdefault"
}
# vim:set ft=alsaconf:
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [HDMI]
Card hw:0 'HDMI'/'HDA Intel HDMI at 0xd1710000 irq 35'
Mixer name : 'Intel Haswell HDMI'
Components : 'HDA:80862807,80860101,00100000'
Controls : 21
Simple ctrls : 3
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
!!-------Mixer controls for card 1 [PCH]
Card hw:1 'PCH'/'HDA Intel PCH at 0xd1714000 irq 34'
Mixer name : 'Realtek ALC283'
Components : 'HDA:10ec0283,10250926,00100003'
Controls : 16
Simple ctrls : 7
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 77 [89%] [-7.50dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 253 [99%] [-0.40dB]
Front Right: Playback 253 [99%] [-0.40dB]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 39 [62%] [12.00dB] [on]
Front Right: Capture 39 [62%] [12.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
!!Alsactl output
!!--------------
--startcollapse--
state.HDMI {
control.1 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Default'
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.5 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.6 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.7 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.8 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.9 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.10 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.11 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.13 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.18 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.19 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.20 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.21 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
}
state.PCH {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
}
}
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.6 {
iface MIXER
name 'Capture Volume'
value.0 39
value.1 39
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 1200
dbvalue.1 1200
}
}
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.9 {
iface MIXER
name 'Master Playback Volume'
value 77
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -750
}
}
control.10 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.11 {
iface CARD
name 'Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.12 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.13 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.15 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.16 {
iface MIXER
name 'PCM Playback Volume'
value.0 253
value.1 253
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -40
dbvalue.1 -40
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
8021q
mrp
xt_connmark
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
iptable_mangle
iptable_filter
uvcvideo
videobuf2_vmalloc
mousedev
hid_multitouch
ath3k
videobuf2_memops
btusb
btbcm
videobuf2_core
v4l2_common
rtsx_usb_ms
btintel
videodev
memstick
bluetooth
usbhid
hid
media
arc4
intel_rapl
iosf_mbi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
joydev
ath9k
fuse
ath9k_common
iTCO_wdt
iTCO_vendor_support
kvm_intel
kvm
acer_wmi
sparse_keymap
ath9k_hw
snd_hda_codec_realtek
crct10dif_pclmul
ath
crc32_pclmul
snd_hda_codec_hdmi
snd_hda_codec_generic
mac80211
crc32c_intel
ghash_clmulni_intel
snd_hda_intel
snd_hda_controller
cfg80211
snd_hda_codec
snd_hda_core
snd_hwdep
snd_pcm
aesni_intel
snd_timer
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
mei_me
serio_raw
r8169
snd
rfkill
mei
soundcore
mii
i2c_i801
lpc_ich
ie31200_edac
battery
shpchp
edac_core
ac
fan
thermal
wmi
evdev
mac_hid
processor
sch_fq_codel
ip_tables
x_tables
ext4
crc16
mbcache
jbd2
rtsx_usb_sdmmc
led_class
mmc_core
rtsx_usb
sd_mod
atkbd
libps2
ahci
libahci
libata
ehci_pci
xhci_pci
xhci_hcd
ehci_hcd
scsi_mod
usbcore
usb_common
i8042
serio
i915
button
intel_gtt
i2c_algo_bit
video
drm_kms_helper
drm
i2c_core
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:
0x05 0x18560010
0x06 0x18560010
0x07 0x18560010
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC1D0/init_pin_configs:
0x12 0x90a601a0
0x14 0x90170110
0x17 0x40020008
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x40e00001
0x1e 0x411111f0
0x21 0x0321101f
/sys/class/sound/hwC1D0/driver_pin_configs:
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
/sys/class/sound/hwC1D0/hints:
!!ALSA/HDA dmesg
!!--------------
[ 3.410974] cfg80211: Calling CRDA to update world regulatory domain
[ 3.412972] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_exit [i915])
[ 3.472548] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 3.472550] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.472551] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 3.472552] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.472553] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.472555] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
[ 3.498991] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 3.499105] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 3.499213] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 3.500727] acer_wmi: Acer Laptop ACPI-WMI Extras
--
[ 3.579911] ath: Regpair used: 0x6c
[ 3.585792] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.604037] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
--
[ 13.387002] EXT4-fs (sda1): mounted filesystem without journal. Opts: barrier=0
[ 15.875738] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 16.012084] cfg80211: Calling CRDA to update world regulatory domain
[ 18.948607] snd_hda_intel 0000:00:1b.0: Unstable LPIB (7040 >= 880); disabling LPIB delay counting
[ 19.164858] cfg80211: Calling CRDA to update world regulatory domainHere is after rmmod when there is no poping sound
upload=true&script=true&cardinfo=
!!################################
!!ALSA Information Script v 0.4.64
!!################################
!!Script ran on: Fri Aug 14 15:34:22 UTC 2015
!!Linux Distribution
!!------------------
Arch Linux \r (\l) DISTRIB_ID=Arch DISTRIB_DESCRIPTION="Arch Linux" NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
!!DMI Information
!!---------------
Manufacturer: Acer
Product Name: Aspire VN7-591G
Product Version: V1.08
Firmware Version: V1.08
!!Kernel Information
!!------------------
Kernel release: 4.1.4-2-ck
Operating System: GNU/Linux
Architecture: x86_64
Processor: unknown
SMP Enabled: Yes
!!ALSA Version
!!------------
Driver version: k4.1.4-2-ck
Library version: 1.0.29
Utilities version: 1.0.29
!!Loaded ALSA modules
!!-------------------
snd_hda_intel
snd_hda_intel
!!Sound Servers on this system
!!----------------------------
Pulseaudio:
Installed - Yes (/usr/sbin/pulseaudio)
Running - Yes
Jack:
Installed - Yes (/usr/sbin/jackd)
Running - No
!!Soundcards recognised by ALSA
!!-----------------------------
0 [HDMI ]: HDA-Intel - HDA Intel HDMI
HDA Intel HDMI at 0xd1710000 irq 35
1 [PCH ]: HDA-Intel - HDA Intel PCH
HDA Intel PCH at 0xd1714000 irq 34
!!PCI Soundcards installed in the system
!!--------------------------------------
00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06)
00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 05)
!!Advanced information - PCI Vendor/Device/Subsystem ID's
!!-------------------------------------------------------
00:03.0 0403: 8086:0c0c (rev 06)
Subsystem: 1025:0926
--
00:1b.0 0403: 8086:8c20 (rev 05)
Subsystem: 1025:0926
!!Modprobe options (Sound related)
!!--------------------------------
snd_hda_intel: model=auto power_save=0
snd_hda_intel: model=auto
!!Loaded sound module options
!!---------------------------
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : auto,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : -1
!!Module: snd_hda_intel
align_buffer_size : -1
bdl_pos_adj : 32,1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
beep_mode : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
enable_msi : -1
id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
jackpoll_ms : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
model : auto,(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
patch : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
position_fix : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
power_save : 0
power_save_controller : Y
probe_mask : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
probe_only : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
single_cmd : N
snoop : -1
!!HDA-Intel Codec information
!!---------------------------
--startcollapse--
Codec: Intel Haswell HDMI
Address: 0
AFG Function Id: 0x1 (unsol 0)
Vendor Id: 0x80862807
Subsystem Id: 0x80860101
Revision Id: 0x100000
No Modem Function Group found
Default PCM:
rates [0x0]:
bits [0x0]:
formats [0x0]:
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0, Clock-stop-OK
GPIO: io=0, o=0, i=0, unsolicited=0, wake=0
Node 0x02 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=1, channel=0
Digital: Enabled GenLevel KAE
Digital category: 0x2
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D3, actual=D3
Node 0x04 [Audio Output] wcaps 0x6611: 8-Channels Digital
Converter: stream=0, channel=0
Digital: Enabled KAE
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x7f0]: 32000 44100 48000 88200 96000 176400 192000
bits [0x1e]: 16 20 24 32
formats [0x5]: PCM AC3
Power states: D0 D3 EPSS
Power: setting=D3, actual=D3
Node 0x05 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=3 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=0, device=0
Control: name="IEC958 Playback Pro Mask", index=0, device=0
Control: name="IEC958 Playback Default", index=0, device=0
Control: name="IEC958 Playback Switch", index=0, device=0
Control: name="ELD", index=0, device=3
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=01, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x06 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=7 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=1, device=0
Control: name="IEC958 Playback Pro Mask", index=1, device=0
Control: name="IEC958 Playback Default", index=1, device=0
Control: name="IEC958 Playback Switch", index=1, device=0
Control: name="ELD", index=0, device=7
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=02, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x07 [Pin Complex] wcaps 0x40778d: 8-Channels Digital Amp-Out CP
Control: name="HDMI/DP,pcm=8 Jack", index=0, device=0
Control: name="IEC958 Playback Con Mask", index=2, device=0
Control: name="IEC958 Playback Pro Mask", index=2, device=0
Control: name="IEC958 Playback Default", index=2, device=0
Control: name="IEC958 Playback Switch", index=2, device=0
Control: name="ELD", index=0, device=8
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x0b000094: OUT Detect HBR HDMI DP
Pin Default 0x18560010: [Jack] Digital Out at Int HDMI
Conn = Digital, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Pin-ctls: 0x00:
Unsolicited: tag=03, enabled=1
Power states: D0 D3 EPSS
Power: setting=D0, actual=D0
Devices: 0
Connection: 0
In-driver Connection: 3
0x02 0x03 0x04
Node 0x08 [Vendor Defined Widget] wcaps 0xf00000: Mono
Codec: Realtek ALC283
Address: 0
AFG Function Id: 0x1 (unsol 1)
Vendor Id: 0x10ec0283
Subsystem Id: 0x10250926
Revision Id: 0x100003
No Modem Function Group found
Default PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Default Amp-In caps: N/A
Default Amp-Out caps: N/A
State of AFG node 0x01:
Power states: D0 D1 D2 D3 CLKSTOP EPSS
Power: setting=D0, actual=D0
GPIO: io=3, o=0, i=0, unsolicited=1, wake=0
IO[0]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[1]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
IO[2]: enable=0, dir=0, wake=0, sticky=0, data=0, unsol=0
Node 0x02 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Speaker Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x4d 0x4d]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x03 [Audio Output] wcaps 0x41d: Stereo Amp-Out
Control: name="Headphone Playback Volume", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Device: name="ALC283 Analog", type="Audio", device=0
Amp-Out caps: ofs=0x57, nsteps=0x57, stepsize=0x02, mute=0
Amp-Out vals: [0x00 0x00]
Converter: stream=8, channel=0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x04 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x05 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x06 [Audio Output] wcaps 0x611: Stereo Digital
Converter: stream=0, channel=0
Digital:
Digital category: 0x0
IEC Coding Type: 0x0
PCM:
rates [0x5e0]: 44100 48000 88200 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x07 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x08 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x23
Node 0x09 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x97 0x97]
Converter: stream=0, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x22
Node 0x0a [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0b [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x17, nsteps=0x1f, stepsize=0x05, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 5
0x18 0x19 0x1a 0x1b 0x1d
Node 0x0c [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x02 0x0b
Node 0x0d [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00] [0x00 0x00]
Connection: 2
0x03 0x0b
Node 0x0e [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x0f [Audio Mixer] wcaps 0x20010a: Mono Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x00 0x00]
Connection: 1
0x0d
Node 0x10 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x11 [Audio Input] wcaps 0x10051b: Stereo Amp-In
Control: name="Capture Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Capture Switch", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Device: name="ALC283 Analog", type="Audio", device=0
Amp-In caps: ofs=0x17, nsteps=0x3f, stepsize=0x02, mute=1
Amp-In vals: [0x27 0x27]
Converter: stream=4, channel=0
SDI-Select: 0
PCM:
rates [0x560]: 44100 48000 96000 192000
bits [0xe]: 16 20 24
formats [0x1]: PCM
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x12
Node 0x12 [Pin Complex] wcaps 0x40040b: Stereo Amp-In
Control: name="Mic Boost Volume", index=0, device=0
ControlAmp: chs=3, dir=In, idx=0, ofs=0
Control: name="Mic Phantom Jack", index=0, device=0
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00000020: IN
Pin Default 0x90a601a0: [Fixed] Mic at Int N/A
Conn = Digital, Color = Unknown
DefAssociation = 0xa, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x20: IN
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Node 0x13 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x14 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Speaker Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Speaker Phantom Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x00 0x00]
Pincap 0x00010014: OUT EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x90170110: [Fixed] Speaker at Int N/A
Conn = Analog, Color = Unknown
DefAssociation = 0x1, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x40: OUT
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D0, actual=D0
Connection: 1
0x0c
Node 0x15 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x16 [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x17 [Pin Complex] wcaps 0x40050c: Mono Amp-Out
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80]
Pincap 0x00000010: OUT
Pin Default 0x40020008: [N/A] Line Out at Ext N/A
Conn = 1/4, Color = Unknown
DefAssociation = 0x0, Sequence = 0x8
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x0f
Node 0x18 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x19 [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1a [Pin Complex] wcaps 0x40048b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Pincap 0x00003724: IN Detect
Vref caps: HIZ 50 GRD 80 100
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1b [Pin Complex] wcaps 0x40058f: Stereo Amp-In Amp-Out
Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x2f, mute=0
Amp-In vals: [0x00 0x00]
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001373c: IN OUT HP EAPD Detect
Vref caps: HIZ 50 GRD 80 100
EAPD 0x2: EAPD
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00: VREF_HIZ
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c* 0x0d
Node 0x1c [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x1d [Pin Complex] wcaps 0x400400: Mono
Pincap 0x00000020: IN
Pin Default 0x40e00001: [N/A] Reserved at Ext N/A
Conn = Unknown, Color = Unknown
DefAssociation = 0x0, Sequence = 0x1
Pin-ctls: 0x00:
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Node 0x1e [Pin Complex] wcaps 0x400781: Stereo Digital
Pincap 0x00000014: OUT Detect
Pin Default 0x411111f0: [N/A] Speaker at Ext Rear
Conn = 1/8, Color = Black
DefAssociation = 0xf, Sequence = 0x0
Misc = NO_PRESENCE
Pin-ctls: 0x00:
Unsolicited: tag=00, enabled=0
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 1
0x06
Node 0x1f [Vendor Defined Widget] wcaps 0xf00000: Mono
Node 0x20 [Vendor Defined Widget] wcaps 0xf00040: Mono
Processing caps: benign=0, ncoeff=73
Node 0x21 [Pin Complex] wcaps 0x40058d: Stereo Amp-Out
Control: name="Headphone Playback Switch", index=0, device=0
ControlAmp: chs=3, dir=Out, idx=0, ofs=0
Control: name="Headphone Jack", index=0, device=0
Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-Out vals: [0x80 0x80]
Pincap 0x0001001c: OUT HP EAPD Detect
EAPD 0x2: EAPD
Pin Default 0x0321101f: [Jack] HP Out at Ext Left
Conn = 1/8, Color = Black
DefAssociation = 0x1, Sequence = 0xf
Pin-ctls: 0xc0: OUT HP
Unsolicited: tag=01, enabled=1
Power states: D0 D1 D2 D3 EPSS
Power: setting=D3, actual=D3
Connection: 2
0x0c 0x0d*
Node 0x22 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
Node 0x23 [Audio Mixer] wcaps 0x20010b: Stereo Amp-In
Amp-In caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
Amp-In vals: [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80] [0x80 0x80]
Connection: 6
0x18 0x19 0x1a 0x1b 0x1d 0x0b
--endcollapse--
!!ALSA Device nodes
!!-----------------
crw-rw----+ 1 root audio 116, 2 Aug 14 17:34 /dev/snd/controlC0
crw-rw----+ 1 root audio 116, 7 Aug 14 17:34 /dev/snd/controlC1
crw-rw----+ 1 root audio 116, 6 Aug 14 17:34 /dev/snd/hwC0D0
crw-rw----+ 1 root audio 116, 10 Aug 14 17:34 /dev/snd/hwC1D0
crw-rw----+ 1 root audio 116, 3 Aug 14 17:34 /dev/snd/pcmC0D3p
crw-rw----+ 1 root audio 116, 4 Aug 14 17:34 /dev/snd/pcmC0D7p
crw-rw----+ 1 root audio 116, 5 Aug 14 17:34 /dev/snd/pcmC0D8p
crw-rw----+ 1 root audio 116, 9 Aug 14 17:34 /dev/snd/pcmC1D0c
crw-rw----+ 1 root audio 116, 8 Aug 14 17:34 /dev/snd/pcmC1D0p
crw-rw----+ 1 root audio 116, 1 Aug 14 17:22 /dev/snd/seq
crw-rw----+ 1 root audio 116, 33 Aug 14 17:22 /dev/snd/timer
/dev/snd/by-path:
total 0
drwxr-xr-x 2 root root 80 Aug 14 17:34 .
drwxr-xr-x 3 root root 280 Aug 14 17:34 ..
lrwxrwxrwx 1 root root 12 Aug 14 17:34 pci-0000:00:03.0 -> ../controlC0
lrwxrwxrwx 1 root root 12 Aug 14 17:34 pci-0000:00:1b.0 -> ../controlC1
!!ALSA configuration files
!!------------------------
!!User specific config file (~/.asoundrc)
pcm.pulse {
type pulse
}
ctl.pulse {
type pulse
}
pcm.!default {
type pulse
}
ctl.!default {
type pulse
}
# hdmi device
#defaults.pcm.device 3
!!System wide config file (/etc/asound.conf)
# Use PulseAudio by default
pcm.!default {
type pulse
fallback "sysdefault"
hint {
show on
description "Default ALSA Output (currently PulseAudio Sound Server)"
}
}
ctl.!default {
type pulse
fallback "sysdefault"
}
# vim:set ft=alsaconf:
!!Aplay/Arecord output
!!--------------------
APLAY
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
ARECORD
**** List of CAPTURE Hardware Devices ****
card 1: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
!!Amixer output
!!-------------
!!-------Mixer controls for card 0 [HDMI]
Card hw:0 'HDMI'/'HDA Intel HDMI at 0xd1710000 irq 35'
Mixer name : 'Intel Haswell HDMI'
Components : 'HDA:80862807,80860101,00100000'
Controls : 21
Simple ctrls : 3
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958',2
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
!!-------Mixer controls for card 1 [PCH]
Card hw:1 'PCH'/'HDA Intel PCH at 0xd1714000 irq 34'
Mixer name : 'Realtek ALC283'
Components : 'HDA:10ec0283,10250926,00100003'
Controls : 16
Simple ctrls : 7
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 87
Mono: Playback 77 [89%] [-7.50dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 0 [0%] [-65.25dB] [off]
Front Right: Playback 0 [0%] [-65.25dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 87
Mono:
Front Left: Playback 87 [100%] [0.00dB] [on]
Front Right: Playback 87 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 253 [99%] [-0.40dB]
Front Right: Playback 253 [99%] [-0.40dB]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 63
Front Left: Capture 39 [62%] [12.00dB] [on]
Front Right: Capture 39 [62%] [12.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Enabled'
!!Alsactl output
!!--------------
--startcollapse--
state.HDMI {
control.1 {
iface CARD
name 'HDMI/DP,pcm=3 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.2 {
iface MIXER
name 'IEC958 Playback Con Mask'
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.3 {
iface MIXER
name 'IEC958 Playback Pro Mask'
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.4 {
iface MIXER
name 'IEC958 Playback Default'
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.5 {
iface MIXER
name 'IEC958 Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.6 {
iface PCM
device 3
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.7 {
iface CARD
name 'HDMI/DP,pcm=7 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.8 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 1
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.9 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 1
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.10 {
iface MIXER
name 'IEC958 Playback Default'
index 1
value '0482000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.11 {
iface MIXER
name 'IEC958 Playback Switch'
index 1
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.12 {
iface PCM
device 7
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.13 {
iface CARD
name 'HDMI/DP,pcm=8 Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface MIXER
name 'IEC958 Playback Con Mask'
index 2
value '0fff000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.15 {
iface MIXER
name 'IEC958 Playback Pro Mask'
index 2
value '0f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access read
type IEC958
count 1
}
}
control.16 {
iface MIXER
name 'IEC958 Playback Default'
index 2
value '0400000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
comment {
access 'read write'
type IEC958
count 1
}
}
control.17 {
iface MIXER
name 'IEC958 Playback Switch'
index 2
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.18 {
iface PCM
device 8
name ELD
value ''
comment {
access 'read volatile'
type BYTES
count 0
}
}
control.19 {
iface PCM
device 3
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.20 {
iface PCM
device 7
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
control.21 {
iface PCM
device 8
name 'Playback Channel Map'
value.0 0
value.1 0
value.2 0
value.3 0
value.4 0
value.5 0
value.6 0
value.7 0
comment {
access 'read write'
type INTEGER
count 8
range '0 - 36'
}
}
}
state.PCH {
control.1 {
iface MIXER
name 'Headphone Playback Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -6525
dbvalue.1 -6525
}
}
control.2 {
iface MIXER
name 'Headphone Playback Switch'
value.0 false
value.1 false
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.3 {
iface MIXER
name 'Speaker Playback Volume'
value.0 87
value.1 87
comment {
access 'read write'
type INTEGER
count 2
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 0
dbvalue.1 0
}
}
control.4 {
iface MIXER
name 'Speaker Playback Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.5 {
iface MIXER
name 'Auto-Mute Mode'
value Enabled
comment {
access 'read write'
type ENUMERATED
count 1
item.0 Disabled
item.1 Enabled
}
}
control.6 {
iface MIXER
name 'Capture Volume'
value.0 39
value.1 39
comment {
access 'read write'
type INTEGER
count 2
range '0 - 63'
dbmin -1725
dbmax 3000
dbvalue.0 1200
dbvalue.1 1200
}
}
control.7 {
iface MIXER
name 'Capture Switch'
value.0 true
value.1 true
comment {
access 'read write'
type BOOLEAN
count 2
}
}
control.8 {
iface MIXER
name 'Mic Boost Volume'
value.0 0
value.1 0
comment {
access 'read write'
type INTEGER
count 2
range '0 - 3'
dbmin 0
dbmax 3600
dbvalue.0 0
dbvalue.1 0
}
}
control.9 {
iface MIXER
name 'Master Playback Volume'
value 77
comment {
access 'read write'
type INTEGER
count 1
range '0 - 87'
dbmin -6525
dbmax 0
dbvalue.0 -750
}
}
control.10 {
iface MIXER
name 'Master Playback Switch'
value true
comment {
access 'read write'
type BOOLEAN
count 1
}
}
control.11 {
iface CARD
name 'Mic Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.12 {
iface CARD
name 'Headphone Jack'
value false
comment {
access read
type BOOLEAN
count 1
}
}
control.13 {
iface CARD
name 'Speaker Phantom Jack'
value true
comment {
access read
type BOOLEAN
count 1
}
}
control.14 {
iface PCM
name 'Playback Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.15 {
iface PCM
name 'Capture Channel Map'
value.0 0
value.1 0
comment {
access read
type INTEGER
count 2
range '0 - 36'
}
}
control.16 {
iface MIXER
name 'PCM Playback Volume'
value.0 253
value.1 253
comment {
access 'read write user'
type INTEGER
count 2
range '0 - 255'
tlv '0000000100000008ffffec1400000014'
dbmin -5100
dbmax 0
dbvalue.0 -40
dbvalue.1 -40
}
}
}
--endcollapse--
!!All Loaded Modules
!!------------------
Module
snd_hda_intel
8021q
mrp
xt_connmark
iptable_nat
nf_conntrack_ipv4
nf_defrag_ipv4
nf_nat_ipv4
nf_nat
nf_conntrack
iptable_mangle
iptable_filter
uvcvideo
videobuf2_vmalloc
mousedev
hid_multitouch
ath3k
videobuf2_memops
btusb
btbcm
videobuf2_core
v4l2_common
rtsx_usb_ms
btintel
videodev
memstick
bluetooth
usbhid
hid
media
arc4
intel_rapl
iosf_mbi
x86_pkg_temp_thermal
intel_powerclamp
coretemp
joydev
ath9k
fuse
ath9k_common
iTCO_wdt
iTCO_vendor_support
kvm_intel
kvm
acer_wmi
sparse_keymap
ath9k_hw
snd_hda_codec_realtek
crct10dif_pclmul
ath
crc32_pclmul
snd_hda_codec_hdmi
snd_hda_codec_generic
mac80211
crc32c_intel
ghash_clmulni_intel
snd_hda_controller
cfg80211
snd_hda_codec
snd_hda_core
snd_hwdep
snd_pcm
aesni_intel
snd_timer
aes_x86_64
lrw
gf128mul
glue_helper
ablk_helper
cryptd
mei_me
serio_raw
r8169
snd
rfkill
mei
soundcore
mii
i2c_i801
lpc_ich
ie31200_edac
battery
shpchp
edac_core
ac
fan
thermal
wmi
evdev
mac_hid
processor
sch_fq_codel
ip_tables
x_tables
ext4
crc16
mbcache
jbd2
rtsx_usb_sdmmc
led_class
mmc_core
rtsx_usb
sd_mod
atkbd
libps2
ahci
libahci
libata
ehci_pci
xhci_pci
xhci_hcd
ehci_hcd
scsi_mod
usbcore
usb_common
i8042
serio
i915
button
intel_gtt
i2c_algo_bit
video
drm_kms_helper
drm
i2c_core
!!Sysfs Files
!!-----------
/sys/class/sound/hwC0D0/init_pin_configs:
0x05 0x18560010
0x06 0x18560010
0x07 0x18560010
/sys/class/sound/hwC0D0/driver_pin_configs:
/sys/class/sound/hwC0D0/user_pin_configs:
/sys/class/sound/hwC0D0/init_verbs:
/sys/class/sound/hwC0D0/hints:
/sys/class/sound/hwC1D0/init_pin_configs:
0x12 0x90a601a0
0x14 0x90170110
0x17 0x40020008
0x18 0x411111f0
0x19 0x411111f0
0x1a 0x411111f0
0x1b 0x411111f0
0x1d 0x40e00001
0x1e 0x411111f0
0x21 0x0321101f
/sys/class/sound/hwC1D0/driver_pin_configs:
/sys/class/sound/hwC1D0/user_pin_configs:
/sys/class/sound/hwC1D0/init_verbs:
/sys/class/sound/hwC1D0/hints:
!!ALSA/HDA dmesg
!!--------------
[ 3.410974] cfg80211: Calling CRDA to update world regulatory domain
[ 3.412972] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_exit [i915])
[ 3.472548] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 3.472550] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 3.472551] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 3.472552] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 3.472553] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 3.472555] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
[ 3.498991] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input7
[ 3.499105] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input8
[ 3.499213] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input9
[ 3.500727] acer_wmi: Acer Laptop ACPI-WMI Extras
--
[ 3.579911] ath: Regpair used: 0x6c
[ 3.585792] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 3.604037] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
--
[ 13.387002] EXT4-fs (sda1): mounted filesystem without journal. Opts: barrier=0
[ 15.875738] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
[ 16.012084] cfg80211: Calling CRDA to update world regulatory domain
[ 18.948607] snd_hda_intel 0000:00:1b.0: Unstable LPIB (7040 >= 880); disabling LPIB delay counting
[ 19.164858] cfg80211: Calling CRDA to update world regulatory domain
--
[ 679.870642] Disabling lock debugging due to kernel taint
[ 682.272023] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_exit [i915])
[ 682.279258] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC283: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 682.279262] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 682.279264] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 682.279265] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 682.279267] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 682.279268] snd_hda_codec_realtek hdaudioC1D0: Mic=0x12
[ 682.281200] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 682.281305] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[ 682.281356] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[ 682.320623] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input19
[ 682.381337] snd_hda_intel 0000:00:1b.0: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.I don't see too much diff, maybe someone else can distinguish better.
Offline
#10 2015-08-14 22:30:34
- mich41
- Member
- Registered: 2012-06-22
- Posts: 796
Re: Clicking/Poping sound from intel hda
And all other parameters are the same? Nothing messing with them during boot? I wonder what would happen if you blacklist this module and load it by hand?
Offline
#11 2015-08-15 02:41:40
- gsgleason
- Member
- Registered: 2012-10-08
- Posts: 71
Re: Clicking/Poping sound from intel hda
I have a new T450s with similar issue. Whenever pulseaudio starts, this loud pop occurs. It happens whenever I load snd_hda_intel as well. I have not noticed an issue during day to day use, though I haven't had this machine very long. The issue only occurs when GDM starts, and after I log in.
UPDATE:
Okay, yes there is popping when starting a new audio during an existing session.
I tried creating a file in /etc/modprobe.d/snd_hda_intel.conf with the following contents, but it doesn't work. The parameters are still 1 and Y after a boot.
options snd_hda_intel power_save=0 power_save_controller=NLast edited by gsgleason (2015-08-15 15:17:01)
Offline
#12 2015-08-15 12:01:02
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: Clicking/Poping sound from intel hda
Ok, as we all know, poping/clicking sound is produced when there is enabled power_save mode in kernel. But in my situation this goes a litle further.
It seems that laptop-mode-tools are causing this iritating sound. When I disable service or remove laptop-mode-tools, popping sound is gone, and real values are attached to current running kernel using modprobe.conf with line consisting of power_save=0.. In config of intel-hda-powersave.conf of laptop-mode-tools, powersave options is disabled, and that option is applyed also to running kernel, but probably some other audio power options is causing this, I will try to disable ac97 even I dont have it in my laptop..
Offline
#13 2015-08-15 15:29:56
- gsgleason
- Member
- Registered: 2012-10-08
- Posts: 71
Re: Clicking/Poping sound from intel hda
I can't figure out how to disable power_save on boot. I tried the following in my loader's options entry:
snd_hda_inte.power_save=0 snd_hda_intel.power_save_controller=NI created a file /etc/modprobe.d/snd_hda_intel.conf with the following:
options snd_hda_intel power_save=0 power_save_controller=NI even created /etc/modules-load.d/snd_hda_intel.conf to try to load the module on boot:
snd_hda_intelBut even with all of this, after logging in via GDM, looking at the values in /sys/module/snd_hda_intel/parameters/ I see that power save is stil on.
Manually unloading and loading the module works, but I'd like to be able to have it disabled automagically on boot.
Disabling the power save does indeed stop the clicks when a new audio source starts, but there is still the loud pop when the module is loaded.
Offline
#14 2015-08-18 18:20:05
- markoer
- Member
- Registered: 2010-12-15
- Posts: 57
Re: Clicking/Poping sound from intel hda
gsgleason wrote:
I can't figure out how to disable power_save on boot. I tried the following in my loader's options entry:
snd_hda_inte.power_save=0 snd_hda_intel.power_save_controller=NI created a file /etc/modprobe.d/snd_hda_intel.conf with the following:
options snd_hda_intel power_save=0 power_save_controller=NI even created /etc/modules-load.d/snd_hda_intel.conf to try to load the module on boot:
snd_hda_intelBut even with all of this, after logging in via GDM, looking at the values in /sys/module/snd_hda_intel/parameters/ I see that power save is stil on.
Manually unloading and loading the module works, but I'd like to be able to have it disabled automagically on boot.
Disabling the power save does indeed stop the clicks when a new audio source starts, but there is still the loud pop when the module is loaded.
Try to add bellow line to /etc/modprobe.d/modpobe.conf
options snd_hda_intel model=auto power_save=0reboot, and then see state of
cat /sys/module/snd_hda_intel/parameters/power_saveBack to my issue:
As i wrote earlier, problem is with laptop-mode-tools. Specificaly I found out that if I stop laptop-mode.service and run manualy
sudo laptop_mode init autoThere is no poping sound at all when starting wm. So this reveals that laptop-mode.service is cousing that poping sound.
When I checked
/usr/lib/systemd/system/laptop-mode.serviceI dont see nothing unusual or relvant for this particular issue:
here is service file:
[Unit]
Description=Laptop Mode Tools
[Service]
Type=oneshot
RemainAfterExit=yes
ExecStart=/usr/bin/laptop_mode init auto
ExecStop=/usr/bin/laptop_mode init stop
ExecStopPost=/bin/rm -f /var/run/laptop-mode-tools/enabled
StandardOutput=tty
StandardError=tty
[Install]
WantedBy=multi-user.targetOffline
#15 2015-08-22 19:32:15
- halocaridina
- Member
- From: US
- Registered: 2014-07-21
- Posts: 77
Re: Clicking/Poping sound from intel hda
@markoer and others,
Yes, I've been experiencing a similar thing on a Thinkpad T440S. Namely, if I disable TLP powersavings, no "popping" on start-up while running on battery (I also don't have the "popping" while running on AC).
I can live with it for now and it will most likely be corrected and disappear in an upcoming kernel release.
Halocaridina
Last edited by halocaridina (2015-08-22 19:49:04)
4X Intel(R) Xeon(R) CPU E7-8870 @ 2.40GHz; 256GiB; 11TB EXT4; SL6.8
2X Intel(R) Xeon(R) CPU E5-2680 @ 2.70GHz; 256GiB; 3.4TB EXT4; SL6.8
Thinkpad X250; Broadwell-ULT Core i5; 8GiB, 525GB Crucial_CT525MX3; Arch
Thinkpad T440S; Haswell-ULT Core i7; 12GiB, 512GB SanDisk X210; Arch
Offline
#16 2016-02-05 09:25:41
- skongshoj
- Member
- Registered: 2015-03-30
- Posts: 12
Re: Clicking/Poping sound from intel hda
I have an issue like this on a XPS-13 9343, although only after upgrading to the I2S-enabled 4.4 kernel. Every time the sound card starts playing (if it's been idle for a few seconds), I get a loud, annoying POP, accompanied by the following in my dmesg:
haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19It seems there's some aggressive power management going on, if firmware gets loaded whenever I start playing sound (after a few seconds idle). However, /sys/module/snd_hda_intel/parameters/power_save is set to 0 and /sys/module/snd_hda_intel/parameters/power_save_controller is set to N. I rmmod'ed and modprobed it with those parameters.
The problem exists no matter if I use PulseAudio or not, and I don't have laptop-mode-tools installed.
Last edited by skongshoj (2016-02-05 15:20:37)
Offline
#17 2016-02-05 15:08:28
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 20,209
Re: Clicking/Poping sound from intel hda
https://www.kernel.org/doc/Documentatio … ersave.txt
I failed to read your second to last sentence
Last edited by ewaller (2016-02-05 15:10:32)
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
#18 2016-02-05 20:21:56
- tutu
- Member
- Registered: 2015-11-11
- Posts: 30
Re: Clicking/Poping sound from intel hda
I'm having a similar issue @skongshoj, but only when I'm using my headphones.
[ 2664.624393] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19I also have a dell xps13 9343. This recently start happening when I upgraded from linux 4.3 to 4.4. I think it is weird that it says haswell, since I have a broadwell.
Oddly as well is the fact that the popping sound only happens when there is no sound being played.
Last edited by tutu (2016-02-05 20:59:25)
Offline
#19 2016-02-05 20:39:18
- skongshoj
- Member
- Registered: 2015-03-30
- Posts: 12
Re: Clicking/Poping sound from intel hda
I doubt that's the issue - that module probably contains functionality that's common to Broadwell and Haswell.
I also have the snd-soc-sst-broadwell module loaded, btw.
Offline
#20 2016-02-06 00:55:14
- tutu
- Member
- Registered: 2015-11-11
- Posts: 30
Re: Clicking/Poping sound from intel hda
Is there anyway to go back to the hda sound, but still using 4.4 kernel? I'm not sure if it is a problem with I2S or with the module snd_soc_sst_broadwell, but before things seems to work alright. Perhaps, going back to HDA till I understand how to fix this popping sound would be good. Any ideas?
Offline
#21 2016-02-13 21:05:49
- Seigfried
- Member
- Registered: 2015-09-12
- Posts: 6
Re: Clicking/Poping sound from intel hda
tutu wrote:
I'm having a similar issue @skongshoj, but only when I'm using my headphones.
[ 2664.624393] haswell-pcm-audio haswell-pcm-audio: FW loaded, mailbox readback FW info: type 01, - version: 00.00, build 77, source commit id: 876ac6906f31a43b6772b23c7c983ce9dcb18a19I also have a dell xps13 9343. This recently start happening when I upgraded from linux 4.3 to 4.4. I think it is weird that it says haswell, since I have a broadwell.
Oddly as well is the fact that the popping sound only happens when there is no sound being played.
Are you sure you only get it when no audio is playing? I have the same issue, but it's always happening with headphones connected.
Offline
#22 2016-02-13 22:58:42
- tutu
- Member
- Registered: 2015-11-11
- Posts: 30
Re: Clicking/Poping sound from intel hda
Hi Segfried - I get the popping sound when I have the headphones plugged to the 3.5mm headphone jack and there is no audio being played. If I unplug the headphone and I have no issues, that is, audio works normally. With headphones plugged, audio playing and builtin speakers muted there is a very tiny noise that pops periodically, just like the when using headphones with no audio.
I found some other threads where people talk about this issue. Their solution though rely on downgrading to 4.3 or compiling the kernel without I2S support, relying on HDA sound instead. Since I'm not using headphones that much I will just wait for coming upgrades and see if the situation gets better.
Offline
#23 2016-02-17 01:27:12
- Seigfried
- Member
- Registered: 2015-09-12
- Posts: 6
Re: Clicking/Poping sound from intel hda
Alright, that matches my behavior. Is there any way to use modprobe to force HDA mode, or does the kernel need to be recompiled because it's a quirk?
Offline
#24 2016-02-17 01:46:17
- Ziusudra
- Member
- Registered: 2014-04-19
- Posts: 120
Re: Clicking/Poping sound from intel hda
It sounds like for some of the clicking/popping issues in this thread it would be worth trying the 'position_fix' option described in: https://git.kernel.org/cgit/linux/kerne … s/v4.5-rc4
Edit: It's also mentioned in: https://git.kernel.org/cgit/linux/kerne … s/v4.5-rc4
(I don't think it applies to everyone in thread, though.)
Last edited by Ziusudra (2016-02-17 02:19:32)
Offline
#25 2016-02-27 05:47:08
- tutu
- Member
- Registered: 2015-11-11
- Posts: 30
Re: Clicking/Poping sound from intel hda
Hi Ziusudra - Is this fix for HDA problems or it also helps to I2S?
Offline