You are not logged in.
- Topics: Active | Unanswered
#1 2016-03-25 18:30:11
- gdm_problem
- Member
- Registered: 2015-12-18
- Posts: 19
[SOLVED] Broadcom-NIC suddenly broken
Hello there,
I have an integrated nic in my laptop from broadcom.
It worked well with the broadcom-wl module from the aur, but suddenly
it stopped working. I did not upgrade the kernel, I reinstalled it, tried the DKMS-
module, but nothing worked. I am using netctl for network-administration.
What is the cause of the problem, how do I solve it?
Here are some logs:
$ > lspci -nn -d 14e4:
02:00.0 Network controller [0280]: Broadcom Corporation BCM43142 802.11b/g/n [14e4:4365] (rev 01)
# After trying to connect with netctl
$ > sudo systemctl status netctl@bc_flitzer.service
sudo systemctl status netctl@bc_flitzer.service ⮂
● netctl@bc_flitzer.service - Networking for netctl profile bc_flitzer
Loaded: loaded (/usr/lib/systemd/system/netctl@.service; static; vendor preset: disabled)
Active: failed (Result: exit-code) since Fr 2016-03-25 18:24:19 UTC; 16s ago
Docs: man:netctl.profile(5)
Process: 18736 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
Main PID: 18736 (code=exited, status=1/FAILURE)
Mär 25 18:24:14 architect systemd[1]: Starting Networking for netctl profile bc_flitzer...
Mär 25 18:24:14 architect network[18736]: Starting network profile 'bc_flitzer'...
Mär 25 18:24:19 architect network[18736]: Failed to bring the network up for profile 'bc_flitzer'
Mär 25 18:24:19 architect systemd[1]: netctl@bc_flitzer.service: Main process exited, code=exited, status=1/FAILURE
Mär 25 18:24:19 architect systemd[1]: Failed to start Networking for netctl profile bc_flitzer.
Mär 25 18:24:19 architect systemd[1]: netctl@bc_flitzer.service: Unit entered failed state.
Mär 25 18:24:19 architect systemd[1]: netctl@bc_flitzer.service: Failed with result 'exit-code'.
$ > wpa_supplicant -B -i wlp2s0 -c <(wpa_passphrase 'FLITZER!!' 'XXXXXX') > log
Successfully initialized wpa_supplicant
rfkill: WLAN soft blocked
rfkill: WLAN soft blocked
nl80211: deinit ifname=wlp2s0 disabled_11b_rates=0
wlp2s0: Failed to initialize driver interface
$ > dmesg --reltime
[Mär25 11:30] Initializing cgroup subsys cpuset
[ +0,000000] Initializing cgroup subsys cpu
[ +0,000000] Initializing cgroup subsys cpuacct
[ +0,000000] Linux version 4.4.5-1-ARCH (builduser@tobias) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Thu Mar 10 07:38:19 CET 2016
[ +0,000000] Command line: initrd=\initramfs-linux.img root=PARTUUID=8ff46dd0-6d3e-40dc-9d89-0e4eaaaf60fc rw
[ +0,000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ +0,000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ +0,000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ +0,000000] x86/fpu: Using 'eager' FPU context switches.
[ +0,000000] e820: BIOS-provided physical RAM map:
[ +0,000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000087fff] usable
[ +0,000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ +0,000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ +0,000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c5fecfff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000c5fed000-0x00000000c6d6dfff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000c6d6e000-0x00000000c6daffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000c6db0000-0x00000000c81affff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000c81b0000-0x00000000cc7befff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000cc7bf000-0x00000000ccebefff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000ccebf000-0x00000000ccfbefff] ACPI NVS
[ +0,000000] BIOS-e820: [mem 0x00000000ccfbf000-0x00000000ccffefff] ACPI data
[ +0,000000] BIOS-e820: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
[ +0,000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf9fffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ +0,000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ +0,000000] BIOS-e820: [mem 0x0000000100000000-0x000000012f5fffff] usable
[ +0,000000] NX (Execute Disable) protection: active
[ +0,000000] e820: update [mem 0xc5dc3018-0xc5dd3057] usable ==> usable
[ +0,000000] e820: update [mem 0xc5db6018-0xc5dc2057] usable ==> usable
[ +0,000000] extended physical RAM map:
[ +0,000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000087fff] usable
[ +0,000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ +0,000000] reserve setup_data: [mem 0x0000000000100000-0x000000001fffffff] usable
[ +0,000000] reserve setup_data: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ +0,000000] reserve setup_data: [mem 0x0000000020200000-0x0000000040003fff] usable
[ +0,000000] reserve setup_data: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ +0,000000] reserve setup_data: [mem 0x0000000040005000-0x00000000c5db6017] usable
[ +0,000000] reserve setup_data: [mem 0x00000000c5db6018-0x00000000c5dc2057] usable
[ +0,000000] reserve setup_data: [mem 0x00000000c5dc2058-0x00000000c5dc3017] usable
[ +0,000000] reserve setup_data: [mem 0x00000000c5dc3018-0x00000000c5dd3057] usable
[ +0,000000] reserve setup_data: [mem 0x00000000c5dd3058-0x00000000c5fecfff] usable
[ +0,000000] reserve setup_data: [mem 0x00000000c5fed000-0x00000000c6d6dfff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000c6d6e000-0x00000000c6daffff] usable
[ +0,000000] reserve setup_data: [mem 0x00000000c6db0000-0x00000000c81affff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000c81b0000-0x00000000cc7befff] usable
[ +0,000000] reserve setup_data: [mem 0x00000000cc7bf000-0x00000000ccebefff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000ccebf000-0x00000000ccfbefff] ACPI NVS
[ +0,000000] reserve setup_data: [mem 0x00000000ccfbf000-0x00000000ccffefff] ACPI data
[ +0,000000] reserve setup_data: [mem 0x00000000ccfff000-0x00000000ccffffff] usable
[ +0,000000] reserve setup_data: [mem 0x00000000cd000000-0x00000000cf9fffff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ +0,000000] reserve setup_data: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ +0,000000] reserve setup_data: [mem 0x0000000100000000-0x000000012f5fffff] usable
[ +0,000000] efi: EFI v2.31 by INSYDE Corp.
[ +0,000000] efi: ACPI=0xccffe000 ACPI 2.0=0xccffe014 SMBIOS=0xccebef98
[ +0,000000] SMBIOS 2.7 present.
[ +0,000000] DMI: LENOVO VIWGP/INVALID, BIOS 78CN25WW(V2.03) 11/19/2013
[ +0,000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ +0,000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ +0,000000] e820: last_pfn = 0x12f600 max_arch_pfn = 0x400000000
[ +0,000000] MTRR default type: uncachable
[ +0,000000] MTRR fixed ranges enabled:
[ +0,000000] 00000-9FFFF write-back
[ +0,000000] A0000-BFFFF uncachable
[ +0,000000] C0000-E7FFF write-protect
[ +0,000000] E8000-EFFFF write-combining
[ +0,000000] F0000-FFFFF write-protect
[ +0,000000] MTRR variable ranges enabled:
[ +0,000000] 0 base 000000000 mask F80000000 write-back
[ +0,000000] 1 base 080000000 mask FC0000000 write-back
[ +0,000000] 2 base 0C0000000 mask FF8000000 write-back
[ +0,000000] 3 base 0C8000000 mask FFC000000 write-back
[ +0,000000] 4 base 0CC000000 mask FFF000000 write-back
[ +0,000000] 5 base 0FF800000 mask FFF800000 write-protect
[ +0,000000] 6 base 100000000 mask FC0000000 write-back
[ +0,000000] 7 base 12F600000 mask FFFE00000 uncachable
[ +0,000000] 8 base 12F800000 mask FFF800000 uncachable
[ +0,000000] 9 base 130000000 mask FF0000000 uncachable
[ +0,000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ +0,000000] e820: last_pfn = 0xcd000 max_arch_pfn = 0x400000000
[ +0,000000] Scanning 1 areas for low memory corruption
[ +0,000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ +0,000000] BRK [0x01b3f000, 0x01b3ffff] PGTABLE
[ +0,000000] BRK [0x01b40000, 0x01b40fff] PGTABLE
[ +0,000000] BRK [0x01b41000, 0x01b41fff] PGTABLE
[ +0,000000] BRK [0x01b42000, 0x01b42fff] PGTABLE
[ +0,000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ +0,000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ +0,000000] RAMDISK: [mem 0x7fc84000-0x7fffffff]
[ +0,000000] ACPI: Early table checksum verification disabled
[ +0,000000] ACPI: RSDP 0x00000000CCFFE014 000024 (v02 LENOVO)
[ +0,000000] ACPI: XSDT 0x00000000CCFFE210 00009C (v01 LENOVO CB-01 00000001 01000013)
[ +0,000000] ACPI: FACP 0x00000000CCFFA000 00010C (v05 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: DSDT 0x00000000CCFEC000 00A06F (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: FACS 0x00000000CCFBB000 000040
[ +0,000000] ACPI: SLIC 0x00000000CCFFD000 000176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: UEFI 0x00000000CCFFC000 000236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: ASF! 0x00000000CCFFB000 0000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: HPET 0x00000000CCFF9000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: APIC 0x00000000CCFF8000 00008C (v03 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: MCFG 0x00000000CCFF7000 00003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: SSDT 0x00000000CCFEB000 0006FE (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: BOOT 0x00000000CCFE9000 000028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: ASPT 0x00000000CCFE7000 000034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: DBGP 0x00000000CCFE6000 000034 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: FPDT 0x00000000CCFE4000 000044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: SSDT 0x00000000CCFE2000 0008E4 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: SSDT 0x00000000CCFE1000 000B22 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: BGRT 0x00000000CCFE0000 000038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ +0,000000] ACPI: Local APIC address 0xfee00000
[ +0,000000] No NUMA configuration found
[ +0,000000] Faking a node at [mem 0x0000000000000000-0x000000012f5fffff]
[ +0,000000] NODE_DATA(0) allocated [mem 0x12f5f5000-0x12f5f8fff]
[ +0,000000] Zone ranges:
[ +0,000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ +0,000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ +0,000000] Normal [mem 0x0000000100000000-0x000000012f5fffff]
[ +0,000000] Movable zone start for each node
[ +0,000000] Early memory node ranges
[ +0,000000] node 0: [mem 0x0000000000001000-0x0000000000087fff]
[ +0,000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ +0,000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ +0,000000] node 0: [mem 0x0000000040005000-0x00000000c5fecfff]
[ +0,000000] node 0: [mem 0x00000000c6d6e000-0x00000000c6daffff]
[ +0,000000] node 0: [mem 0x00000000c81b0000-0x00000000cc7befff]
[ +0,000000] node 0: [mem 0x00000000ccfff000-0x00000000ccffffff]
[ +0,000000] node 0: [mem 0x0000000100000000-0x000000012f5fffff]
[ +0,000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000012f5fffff]
[ +0,000000] On node 0 totalpages: 1022405
[ +0,000000] DMA zone: 64 pages used for memmap
[ +0,000000] DMA zone: 24 pages reserved
[ +0,000000] DMA zone: 3975 pages, LIFO batch:0
[ +0,000000] DMA32 zone: 12881 pages used for memmap
[ +0,000000] DMA32 zone: 824382 pages, LIFO batch:31
[ +0,000000] Normal zone: 3032 pages used for memmap
[ +0,000000] Normal zone: 194048 pages, LIFO batch:31
[ +0,000000] Reserving Intel graphics stolen memory at 0xcda00000-0xcf9fffff
[ +0,000000] ACPI: PM-Timer IO Port: 0x408
[ +0,000000] ACPI: Local APIC address 0xfee00000
[ +0,000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ +0,000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ +0,000000] ACPI: IRQ0 used by override.
[ +0,000000] ACPI: IRQ9 used by override.
[ +0,000000] Using ACPI (MADT) for SMP configuration information
[ +0,000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ +0,000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ +0,000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ +0,000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ +0,000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ +0,000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ +0,000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xc5db6000-0xc5db6fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xc5dc2000-0xc5dc2fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xc5dc3000-0xc5dc3fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xc5dd3000-0xc5dd3fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xc5fed000-0xc6d6dfff]
[ +0,000000] PM: Registered nosave memory: [mem 0xc6db0000-0xc81affff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcc7bf000-0xccebefff]
[ +0,000000] PM: Registered nosave memory: [mem 0xccebf000-0xccfbefff]
[ +0,000000] PM: Registered nosave memory: [mem 0xccfbf000-0xccffefff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf9fffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xcfa00000-0xefffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xf0000000-0xf3ffffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xf4000000-0xfeafffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb03fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfeb04000-0xfebfffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ +0,000000] PM: Registered nosave memory: [mem 0xfee01000-0xffb7ffff]
[ +0,000000] PM: Registered nosave memory: [mem 0xffb80000-0xffffffff]
[ +0,000000] e820: [mem 0xcfa00000-0xefffffff] available for PCI devices
[ +0,000000] Booting paravirtualized kernel on bare hardware
[ +0,000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ +0,000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ +0,000000] PERCPU: Embedded 32 pages/cpu @ffff88012f200000 s92696 r8192 d30184 u262144
[ +0,000000] pcpu-alloc: s92696 r8192 d30184 u262144 alloc=1*2097152
[ +0,000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ +0,000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1006404
[ +0,000000] Policy zone: Normal
[ +0,000000] Kernel command line: initrd=\initramfs-linux.img root=PARTUUID=8ff46dd0-6d3e-40dc-9d89-0e4eaaaf60fc rw
[ +0,000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ +0,000000] Calgary: detecting Calgary via BIOS EBDA area
[ +0,000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ +0,000000] Memory: 3886776K/4089620K available (5742K kernel code, 946K rwdata, 1820K rodata, 1188K init, 1156K bss, 202844K reserved, 0K cma-reserved)
[ +0,000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ +0,000000] Preemptible hierarchical RCU implementation.
[ +0,000000] Build-time adjustment of leaf fanout to 64.
[ +0,000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ +0,000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ +0,000000] NR_IRQS:8448 nr_irqs:488 16
[ +0,000000] Console: colour dummy device 80x25
[ +0,000000] console [tty0] enabled
[ +0,000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ +0,000000] hpet clockevent registered
[ +0,000000] tsc: Fast TSC calibration using PIT
[ +0,000000] tsc: Detected 2394.500 MHz processor
[ +0,000000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4790.54 BogoMIPS (lpj=7981666)
[ +0,000003] pid_max: default: 32768 minimum: 301
[ +0,000005] ACPI: Core revision 20150930
[ +0,007744] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ +0,010493] Security Framework initialized
[ +0,000004] Yama: becoming mindful.
[ +0,000248] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ +0,001031] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ +0,000470] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ +0,000005] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ +0,000207] Initializing cgroup subsys io
[ +0,000003] Initializing cgroup subsys memory
[ +0,000006] Initializing cgroup subsys devices
[ +0,000002] Initializing cgroup subsys freezer
[ +0,000002] Initializing cgroup subsys net_cls
[ +0,000002] Initializing cgroup subsys pids
[ +0,000021] CPU: Physical Processor ID: 0
[ +0,000001] CPU: Processor Core ID: 0
[ +0,000005] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ +0,000001] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ +0,000003] mce: CPU supports 7 MCE banks
[ +0,000011] CPU0: Thermal monitoring enabled (TM1)
[ +0,000007] process: using mwait in idle threads
[ +0,000003] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ +0,000001] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ +0,000415] Freeing SMP alternatives memory: 20K (ffffffff81a17000 - ffffffff81a1c000)
[ +0,016126] ftrace: allocating 22869 entries in 90 pages
[ +0,010645] x2apic: IRQ remapping doesn't support X2APIC mode
[ +0,000447] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ +0,033008] TSC deadline timer enabled
[ +0,000004] smpboot: CPU0: Intel(R) Core(TM) i3-3110M CPU @ 2.40GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ +0,000022] Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, full-width counters, Intel PMU driver.
[ +0,000020] ... version: 3
[ +0,000001] ... bit width: 48
[ +0,000001] ... generic registers: 4
[ +0,000001] ... value mask: 0000ffffffffffff
[ +0,000001] ... max period: 0000ffffffffffff
[ +0,000000] ... fixed-purpose events: 3
[ +0,000001] ... event mask: 000000070000000f
[ +0,030008] x86: Booting SMP configuration:
[ +0,000004] .... node #0, CPUs: #1
[ +0,002688] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ +0,007325] #2 #3
[ +0,012590] x86: Booted up 1 node, 4 CPUs
[ +0,000004] smpboot: Total of 4 processors activated (19163.16 BogoMIPS)
[ +0,003166] devtmpfs: initialized
[ +0,002264] PM: Registering ACPI NVS region [mem 0xccebf000-0xccfbefff] (1048576 bytes)
[ +0,000091] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ +0,000075] pinctrl core: initialized pinctrl subsystem
[ +0,000040] RTC time: 11:30:02, date: 03/25/16
[ +0,000103] NET: Registered protocol family 16
[ +0,007267] cpuidle: using governor ladder
[ +0,013340] cpuidle: using governor menu
[ +0,000064] Simple Boot Flag at 0x44 set to 0x1
[ +0,000021] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ +0,000002] ACPI: bus type PCI registered
[ +0,000001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ +0,000068] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ +0,000002] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ +0,000006] PCI: Using configuration type 1 for base access
[ +0,000164] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ +0,013313] ACPI: Added _OSI(Module Device)
[ +0,000001] ACPI: Added _OSI(Processor Device)
[ +0,000001] ACPI: Added _OSI(3.0 _SCP Extensions)
[ +0,000002] ACPI: Added _OSI(Processor Aggregator Device)
[ +0,002942] ACPI: Executed 1 blocks of module-level executable AML code
[ +0,002519] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ +0,000413] ACPI: Dynamic OEM Table Load:
[ +0,000008] ACPI: SSDT 0xFFFF880129F80000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20120518)
[ +0,000547] ACPI: Dynamic OEM Table Load:
[ +0,000005] ACPI: SSDT 0xFFFF880129F61800 000303 (v01 PmRef ApIst 00003000 INTL 20120518)
[ +0,000476] ACPI: Dynamic OEM Table Load:
[ +0,000005] ACPI: SSDT 0xFFFF880129EFE200 000119 (v01 PmRef ApCst 00003000 INTL 20120518)
[ +0,000876] ACPI : EC: EC started
[ +0,000141] ACPI: Interpreter enabled
[ +0,000007] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ +0,000004] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ +0,000014] ACPI: (supports S0 S3 S4 S5)
[ +0,000001] ACPI: Using IOAPIC for interrupt routing
[ +0,000021] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ +0,102192] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ +0,000006] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ +0,000110] \_SB_.PCI0:_OSC invalid UUID
[ +0,000002] _OSC request data:1 1f 0
[ +0,000003] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ +0,000324] PCI host bridge to bus 0000:00
[ +0,000003] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ +0,000002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ +0,000002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ +0,000002] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ +0,000002] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ +0,000002] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ +0,000002] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ +0,000001] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ +0,000002] pci_bus 0000:00: root bus resource [mem 0xcfa00000-0xfeafffff window]
[ +0,000002] pci_bus 0000:00: root bus resource [bus 00-3e]
[ +0,000008] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ +0,000090] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ +0,000013] pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe03fffff 64bit]
[ +0,000007] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ +0,000005] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ +0,000115] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ +0,000032] pci 0000:00:14.0: reg 0x10: [mem 0xe0600000-0xe060ffff 64bit]
[ +0,000061] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ +0,000042] pci 0000:00:14.0: System wakeup disabled by ACPI
[ +0,000040] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ +0,000033] pci 0000:00:16.0: reg 0x10: [mem 0xe0614000-0xe061400f 64bit]
[ +0,000065] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ +0,000082] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ +0,000028] pci 0000:00:1a.0: reg 0x10: [mem 0xe0619000-0xe06193ff]
[ +0,000074] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ +0,000063] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ +0,000040] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ +0,000028] pci 0000:00:1b.0: reg 0x10: [mem 0xe0610000-0xe0613fff 64bit]
[ +0,000064] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ +0,000044] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ +0,000039] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ +0,000078] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ +0,000081] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ +0,000077] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ +0,000085] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ +0,000030] pci 0000:00:1d.0: reg 0x10: [mem 0xe0618000-0xe06183ff]
[ +0,000074] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ +0,000063] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ +0,000039] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ +0,000171] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ +0,000025] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ +0,000008] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ +0,000008] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ +0,000008] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ +0,000009] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ +0,000008] pci 0000:00:1f.2: reg 0x24: [mem 0xe0617000-0xe06177ff]
[ +0,000033] pci 0000:00:1f.2: PME# supported from D3hot
[ +0,000071] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ +0,000018] pci 0000:00:1f.3: reg 0x10: [mem 0xe0615000-0xe06150ff 64bit]
[ +0,000021] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ +0,000191] pci 0000:01:00.0: [1969:10a0] type 00 class 0x020000
[ +0,000213] pci 0000:01:00.0: reg 0x10: [mem 0xe0500000-0xe053ffff 64bit]
[ +0,000049] pci 0000:01:00.0: reg 0x18: [io 0x2000-0x207f]
[ +0,000361] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ +0,000160] pci 0000:01:00.0: System wakeup disabled by ACPI
[ +0,006358] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ +0,000005] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ +0,000004] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
[ +0,000099] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
[ +0,000062] pci 0000:02:00.0: reg 0x10: [mem 0xe0400000-0xe0407fff 64bit]
[ +0,000153] pci 0000:02:00.0: supports D1 D2
[ +0,000002] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ +0,000052] pci 0000:02:00.0: System wakeup disabled by ACPI
[ +0,006289] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ +0,000007] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
[ +0,050248] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000051] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000047] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000046] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000045] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000045] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000045] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000046] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ +0,000095] ACPI: Enabled 4 GPEs in block 00 to 3F
[ +0,000034] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ +0,000089] vgaarb: setting as boot device: PCI:0000:00:02.0
[ +0,000002] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ +0,000003] vgaarb: loaded
[ +0,000001] vgaarb: bridge control possible 0000:00:02.0
[ +0,000184] PCI: Using ACPI for IRQ routing
[ +0,001573] PCI: pci_cache_line_size set to 64 bytes
[ +0,000071] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ +0,000002] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ +0,000001] e820: reserve RAM buffer [mem 0xc5db6018-0xc7ffffff]
[ +0,000002] e820: reserve RAM buffer [mem 0xc5dc3018-0xc7ffffff]
[ +0,000001] e820: reserve RAM buffer [mem 0xc5fed000-0xc7ffffff]
[ +0,000001] e820: reserve RAM buffer [mem 0xc6db0000-0xc7ffffff]
[ +0,000002] e820: reserve RAM buffer [mem 0xcc7bf000-0xcfffffff]
[ +0,000001] e820: reserve RAM buffer [mem 0xcd000000-0xcfffffff]
[ +0,000002] e820: reserve RAM buffer [mem 0x12f600000-0x12fffffff]
[ +0,000107] NetLabel: Initializing
[ +0,000002] NetLabel: domain hash size = 128
[ +0,000001] NetLabel: protocols = UNLABELED CIPSOv4
[ +0,000010] NetLabel: unlabeled traffic allowed by default
[ +0,000027] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ +0,000004] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ +0,003032] clocksource: Switched to clocksource hpet
[ +0,005043] pnp: PnP ACPI init
[ +0,000130] system 00:00: [io 0x0680-0x069f] has been reserved
[ +0,000003] system 00:00: [io 0x1000-0x100f] has been reserved
[ +0,000002] system 00:00: [io 0xffff] has been reserved
[ +0,000001] system 00:00: [io 0xffff] has been reserved
[ +0,000002] system 00:00: [io 0x0400-0x0453] could not be reserved
[ +0,000002] system 00:00: [io 0x0458-0x047f] has been reserved
[ +0,000001] system 00:00: [io 0x0500-0x057f] has been reserved
[ +0,000002] system 00:00: [io 0x164e-0x164f] has been reserved
[ +0,000002] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ +0,000004] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000027] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ +0,000047] system 00:02: [io 0x0454-0x0457] has been reserved
[ +0,000003] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ +0,000022] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ +0,000048] pnp 00:04: Plug and Play ACPI device, IDs SYN2b13 SYN0700 SYN0002 PNP0f13 (active)
[ +0,048149] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ +0,000002] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ +0,000002] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ +0,000002] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ +0,000002] system 00:05: [mem 0xf0000000-0xf3ffffff] has been reserved
[ +0,000001] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ +0,000002] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ +0,000003] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ +0,000002] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ +0,000002] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ +0,000002] system 00:05: [mem 0xcfa00000-0xcfa00fff] has been reserved
[ +0,000002] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ +0,000304] system 00:06: [mem 0x20000000-0x201fffff] has been reserved
[ +0,000002] system 00:06: [mem 0x40004000-0x40004fff] has been reserved
[ +0,000003] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[ +0,000016] pnp: PnP ACPI: found 7 devices
[ +0,006243] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ +0,000027] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ +0,000004] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ +0,000006] pci 0000:00:1c.0: bridge window [mem 0xe0500000-0xe05fffff]
[ +0,000009] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ +0,000005] pci 0000:00:1c.1: bridge window [mem 0xe0400000-0xe04fffff]
[ +0,000010] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ +0,000001] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ +0,000002] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ +0,000002] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ +0,000001] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ +0,000002] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ +0,000002] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ +0,000001] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ +0,000002] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ +0,000001] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ +0,000002] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ +0,000002] pci_bus 0000:00: resource 15 [mem 0xcfa00000-0xfeafffff window]
[ +0,000001] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
[ +0,000002] pci_bus 0000:01: resource 1 [mem 0xe0500000-0xe05fffff]
[ +0,000002] pci_bus 0000:02: resource 1 [mem 0xe0400000-0xe04fffff]
[ +0,000031] NET: Registered protocol family 2
[ +0,000158] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ +0,000078] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ +0,000097] TCP: Hash tables configured (established 32768 bind 32768)
[ +0,000022] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ +0,000017] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ +0,000049] NET: Registered protocol family 1
[ +0,000012] pci 0000:00:02.0: Video device with shadowed ROM
[ +1,332756] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ +1,333365] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ +0,000123] pci 0000:01:00.0: set MSI_INTX_DISABLE_BUG flag
[ +0,000030] PCI: CLS 64 bytes, default 64
[ +0,000047] Unpacking initramfs...
[ +0,058714] Freeing initrd memory: 3568K (ffff88007fc84000 - ffff880080000000)
[ +0,000011] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ +0,000002] software IO TLB [mem 0xc11c0000-0xc51c0000] (64MB) mapped at [ffff8800c11c0000-ffff8800c51bffff]
[ +0,000066] RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 163840 ms ovfl timer
[ +0,000001] hw unit of domain pp0-core 2^-16 Joules
[ +0,000002] hw unit of domain package 2^-16 Joules
[ +0,000000] hw unit of domain pp1-gpu 2^-16 Joules
[ +0,000141] Scanning for low memory corruption every 60 seconds
[ +0,000294] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ +0,000355] Initialise system trusted keyring
[ +0,000130] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ +0,001344] zbud: loaded
[ +0,000185] VFS: Disk quotas dquot_6.6.0
[ +0,000031] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ +0,000148] Key type big_key registered
[ +0,000242] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ +0,000035] io scheduler noop registered
[ +0,000003] io scheduler deadline registered
[ +0,000029] io scheduler cfq registered (default)
[ +0,000309] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ +0,000005] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ +0,000014] efifb: probing for efifb
[ +0,000009] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90000800000, using 4128k, total 4128k
[ +0,000002] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ +0,000000] efifb: scrolling: redraw
[ +0,000002] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ +0,002587] Console: switching to colour frame buffer device 170x48
[ +0,002387] fb0: EFI VGA frame buffer device
[ +0,000008] intel_idle: MWAIT substates: 0x21120
[ +0,000001] intel_idle: v0.4 model 0x3A
[ +0,000001] intel_idle: lapic_timer_reliable_states 0xffffffff
[ +0,000172] GHES: HEST is not enabled!
[ +0,000060] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ +0,000379] Linux agpgart interface v0.103
[ +0,000298] rtc_cmos 00:01: RTC can wake from S4
[ +0,000119] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ +0,000029] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ +0,000010] Intel P-state driver initializing.
[ +0,000156] ledtrig-cpu: registered to indicate activity on CPUs
[ +0,000570] NET: Registered protocol family 10
[ +0,000323] NET: Registered protocol family 17
[ +0,000268] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x15
[ +0,000014] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x15
[ +0,000020] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x15
[ +0,000016] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x15
[ +0,000056] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ +0,000262] registered taskstats version 1
[ +0,000026] Loading compiled-in X.509 certificates
[ +0,000030] zswap: loaded using pool lzo/zbud
[ +0,000564] Magic number: 8:503:530
[ +0,000106] rtc_cmos 00:01: setting system clock to 2016-03-25 11:30:05 UTC (1458905405)
[ +0,000178] PM: Hibernation image not present or could not be loaded.
[ +0,001691] Freeing unused kernel memory: 1188K (ffffffff818ee000 - ffffffff81a17000)
[ +0,000002] Write protecting the kernel read-only data: 8192k
[ +0,000391] Freeing unused kernel memory: 392K (ffff88000159e000 - ffff880001600000)
[ +0,001120] Freeing unused kernel memory: 228K (ffff8800017c7000 - ffff880001800000)
[ +0,011938] random: systemd-tmpfile urandom read with 4 bits of entropy available
[ +0,039888] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ +0,022287] serio: i8042 KBD port at 0x60,0x64 irq 1
[ +0,000091] serio: i8042 AUX port at 0x60,0x64 irq 12
[ +0,001216] ACPI: bus type USB registered
[ +0,000029] usbcore: registered new interface driver usbfs
[ +0,000013] usbcore: registered new interface driver hub
[ +0,000088] usbcore: registered new device driver usb
[ +0,000646] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ +0,000209] ehci-pci: EHCI PCI platform driver
[ +0,000188] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ +0,000010] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ +0,000018] ehci-pci 0000:00:1a.0: debug port 2
[ +0,001365] SCSI subsystem initialized
[ +0,001548] libata version 3.00 loaded.
[ +0,001005] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ +0,000024] ehci-pci 0000:00:1a.0: irq 16, io mem 0xe0619000
[ +0,008680] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ +0,000394] hub 1-0:1.0: USB hub found
[ +0,000184] hub 1-0:1.0: 2 ports detected
[ +0,000567] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ +0,000009] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ +0,000019] ehci-pci 0000:00:1d.0: debug port 2
[ +0,003926] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ +0,000020] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe0618000
[ +0,008242] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ +0,000298] hub 2-0:1.0: USB hub found
[ +0,000015] hub 2-0:1.0: 2 ports detected
[ +0,000308] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ +0,000006] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ +0,001096] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ +0,000006] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ +0,000351] hub 3-0:1.0: USB hub found
[ +0,000014] hub 3-0:1.0: 4 ports detected
[ +0,000605] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ +0,000005] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ +0,000174] hub 4-0:1.0: USB hub found
[ +0,000011] hub 4-0:1.0: 4 ports detected
[ +0,000575] ahci 0000:00:1f.2: version 3.0
[ +0,000165] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ +0,007280] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ +0,005763] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ +0,000004] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ +0,007363] scsi host0: ahci
[ +0,000262] scsi host1: ahci
[ +0,000276] scsi host2: ahci
[ +0,000181] scsi host3: ahci
[ +0,000149] scsi host4: ahci
[ +0,000120] scsi host5: ahci
[ +0,000050] ata1: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617100 irq 25
[ +0,000002] ata2: DUMMY
[ +0,000002] ata3: SATA max UDMA/133 abar m2048@0xe0617000 port 0xe0617200 irq 25
[ +0,000001] ata4: DUMMY
[ +0,000001] ata5: DUMMY
[ +0,000001] ata6: DUMMY
[ +0,268250] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ +0,013336] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ +0,036676] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ +0,000706] ata1.00: ATA-8: WDC WD5000LPVT-24G33T1, 02.01A02, max UDMA/133
[ +0,000006] ata1.00: 976773168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ +0,000746] ata1.00: configured for UDMA/133
[ +0,000357] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVT-2 1A02 PQ: 0 ANSI: 5
[ +0,014856] usb 3-4: new high-speed USB device number 2 using xhci_hcd
[ +0,057496] hub 1-1:1.0: USB hub found
[ +0,000153] hub 1-1:1.0: 6 ports detected
[ +0,013227] hub 2-1:1.0: USB hub found
[ +0,000125] hub 2-1:1.0: 6 ports detected
[ +0,232337] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ +0,003455] ata3.00: ATAPI: MATSHITA DVD-RAM UJ8E1, 8.71, max UDMA/100
[ +0,002474] ata3.00: configured for UDMA/100
[ +0,004663] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8E1 8.71 PQ: 0 ANSI: 5
[ +0,009417] usb 1-1.2: new high-speed USB device number 3 using ehci-pci
[ +0,006067] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ +0,000006] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ +0,000134] sd 0:0:0:0: [sda] Write Protect is off
[ +0,000008] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ +0,000046] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ +0,014816] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ +0,000005] cdrom: Uniform CD-ROM driver Revision: 3.20
[ +0,000188] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ +0,074324] sda: sda1 sda2 sda3 sda4 sda5 sda6
[ +0,001049] sd 0:0:0:0: [sda] Attached SCSI disk
[ +0,073352] usb 1-1.3: new full-speed USB device number 4 using ehci-pci
[ +0,029996] tsc: Refined TSC clocksource calibration: 2394.560 MHz
[ +0,000005] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2284248580e, max_idle_ns: 440795288736 ns
[ +0,123324] usb 1-1.4: new high-speed USB device number 5 using ehci-pci
[ +0,088136] usbcore: registered new interface driver rtsx_usb
[ +0,788731] clocksource: Switched to clocksource tsc
[ +0,113102] random: nonblocking pool is initialized
[ +0,756576] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ +0,924906] ip_tables: (C) 2000-2006 Netfilter Core Team
[ +0,088114] systemd[1]: systemd 229 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ +0,000186] systemd[1]: Detected architecture x86-64.
[ +0,032853] systemd[1]: Set hostname to <architect>.
[ +1,608971] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ +0,000249] systemd[1]: Listening on udev Control Socket.
[ +0,000586] systemd[1]: Created slice System Slice.
[ +0,000174] systemd[1]: Listening on Journal Socket (/dev/log).
[ +0,000286] systemd[1]: Created slice system-getty.slice.
[ +0,000161] systemd[1]: Listening on Journal Socket.
[ +0,013809] systemd[1]: Mounting Huge Pages File System...
[ +0,000228] systemd[1]: Listening on udev Kernel Socket.
[ +0,146885] systemd[1]: Listening on Process Core Dump Socket.
[ +0,000165] systemd[1]: Reached target Encrypted Volumes.
[ +0,000181] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ +0,000326] systemd[1]: Created slice User and Session Slice.
[ +0,000133] systemd[1]: Reached target Remote File Systems.
[ +0,000288] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ +0,000188] systemd[1]: Listening on LVM2 metadata daemon socket.
[ +0,011615] systemd[1]: Mounting Debug File System...
[ +0,046761] systemd[1]: Starting Load Kernel Modules...
[ +0,015060] systemd[1]: Mounting Temporary Directory...
[ +0,028373] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ +0,000180] systemd[1]: Reached target Slices.
[ +0,000320] systemd[1]: Created slice system-netctl.slice.
[ +0,019371] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ +0,001073] systemd[1]: Mounting POSIX Message Queue File System...
[ +0,000983] systemd[1]: Starting Journal Service...
[ +0,001161] systemd[1]: Starting Remount Root and Kernel File Systems...
[ +0,000267] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ +0,001170] systemd[1]: Starting Setup Virtual Console...
[ +0,002453] systemd[1]: Mounted Huge Pages File System.
[ +0,000215] systemd[1]: Mounted Debug File System.
[ +0,000170] systemd[1]: Mounted Temporary Directory.
[ +0,010432] systemd[1]: Mounted POSIX Message Queue File System.
[ +0,015847] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ +0,053099] EXT4-fs (sda5): re-mounted. Opts: data=ordered
[ +0,001020] systemd[1]: Started Remount Root and Kernel File Systems.
[ +0,012114] systemd[1]: Starting Load/Save Random Seed...
[ +0,000720] systemd[1]: Starting Create Static Device Nodes in /dev...
[ +0,289316] systemd[1]: Starting udev Coldplug all Devices...
[ +0,001079] systemd[1]: Started Load/Save Random Seed.
[ +0,492598] vboxdrv: Found 4 processor cores
[ +0,019715] vboxdrv: TSC mode is Invariant, tentative frequency 2394557521 Hz
[ +0,000007] vboxdrv: Successfully loaded version 5.0.16_OSE (interface 0x00240000)
[ +0,005172] systemd[1]: Started Create Static Device Nodes in /dev.
[ +0,023098] systemd[1]: Starting udev Kernel Device Manager...
[ +0,001429] systemd[1]: Reached target Local File Systems (Pre).
[ +0,007428] VBoxPciLinuxInit
[ +0,012392] systemd[1]: Started udev Coldplug all Devices.
[ +0,059620] vboxpci: IOMMU not found (not registered)
[ +0,003463] systemd[1]: Started Setup Virtual Console.
[ +0,116455] VBoxNetAdp: Successfully started.
[ +0,000939] VBoxNetFlt: Successfully started.
[ +0,000580] systemd[1]: Started Load Kernel Modules.
[ +0,019515] systemd[1]: Starting Apply Kernel Variables...
[ +0,002345] systemd[1]: Mounting Configuration File System...
[ +0,096598] systemd[1]: Mounted Configuration File System.
[ +1,181987] systemd[1]: Started Apply Kernel Variables.
[ +0,118589] systemd[1]: Started udev Kernel Device Manager.
[ +0,111390] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input2
[ +0,000006] ACPI: Power Button [PWRB]
[ +0,000068] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ +0,000036] ACPI: Lid Switch [LID0]
[ +0,000046] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ +0,000002] ACPI: Power Button [PWRF]
[ +0,465097] ACPI Warning: SystemIO range 0x0000000000003040-0x000000000000305F conflicts with OpRegion 0x0000000000003040-0x000000000000304F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
[ +0,000009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ +0,120637] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150930/utaddress-254)
[ +0,000011] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ +0,000007] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ +0,000007] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ +0,000003] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ +0,000007] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ +0,000002] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20150930/utaddress-254)
[ +0,000007] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ +0,000002] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ +0,070571] ACPI: AC Adapter [ACAD] (on-line)
[ +0,023553] [drm] Initialized drm 1.1.0 20060810
[ +0,005024] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ +0,014044] thermal LNXTHERM:00: registered as thermal_zone0
[ +0,000005] ACPI: Thermal Zone [TZ00] (30 C)
[ +0,010472] wmi: Mapper loaded
[ +0,114604] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6
[ +0,038309] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ +0,244953] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ +0,161395] ACPI: Battery Slot [BAT1] (battery absent)
[ +0,116389] alx 0000:01:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [f8:a9:63:2e:18:25]
[ +0,359647] systemd[1]: Found device WDC_WD5000LPVT-24G33T1 EFI\x20system\x20partition.
[ +0,124815] psmouse serio1: synaptics: queried max coordinates: x [..5728], y [..4902]
[ +0,042584] systemd[1]: Mounting /boot...
[ +0,069777] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x240000/0xa0400/0x0, board id: 1695, fw id: 739436
[ +0,060572] [drm] Memory usable by graphics device = 2048M
[ +0,000007] checking generic (d0000000 408000) vs hw (d0000000 10000000)
[ +0,000003] fb: switching to inteldrmfb from EFI VGA
[ +0,000037] Console: switching to colour dummy device 80x25
[ +0,000119] [drm] Replacing VGA console driver
[ +0,008252] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ +0,000004] [drm] Driver supports precise vblank timestamp query.
[ +0,000319] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ +0,009184] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input5
[ +0,014412] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ +0,000224] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input8
[ +0,000118] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ +0,113649] fbcon: inteldrmfb (fb0) is primary device
[ +0,107871] iTCO_vendor_support: vendor-support=0
[ +0,022583] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ +0,000044] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ +0,000117] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ +0,053322] alx 0000:01:00.0 enp1s0: renamed from eth0
[ +0,170353] systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
[ +0,577638] Console: switching to colour frame buffer device 170x48
[ +0,108926] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ +0,000679] systemd[1]: dev-disk-by\x2dpartlabel-Basic\x5cx20data\x5cx20partition.device: Dev dev-disk-by\x2dpartlabel-Basic\x5cx20data\x5cx20partition.device appeared twice with different sysfs paths /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda1 and /sys/devices/pci0000:00/0000:00:1f.2/ata1/host0/target0:0:0/0:0:0:0/block/sda/sda4
[ +0,003011] systemd[1]: Found device WDC_WD5000LPVT-24G33T1 swap.
[ +0,000154] systemd[1]: Found device WDC_WD5000LPVT-24G33T1 swap.
[ +0,011942] systemd[1]: Activating swap Swap Partition...
[ +0,001278] systemd[1]: Starting Load/Save RF Kill Switch Status...
[ +0,085299] snd_hda_codec_conexant hdaudioC0D0: CX20757: BIOS auto-probing.
[ +0,000349] snd_hda_codec_conexant hdaudioC0D0: autoconfig for CX20757: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ +0,000003] snd_hda_codec_conexant hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ +0,000003] snd_hda_codec_conexant hdaudioC0D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ +0,000002] snd_hda_codec_conexant hdaudioC0D0: mono: mono_out=0x0
[ +0,000002] snd_hda_codec_conexant hdaudioC0D0: inputs:
[ +0,000003] snd_hda_codec_conexant hdaudioC0D0: Internal Mic=0x1a
[ +0,000003] snd_hda_codec_conexant hdaudioC0D0: Mic=0x19
[ +0,000875] snd_hda_codec_conexant hdaudioC0D0: Enable sync_write for stable communication
[ +0,093106] systemd[1]: Created slice system-systemd\x2dbacklight.slice.
[ +0,012520] systemd[1]: Starting Load/Save Screen Backlight Brightness of backlight:intel_backlight...
[ +0,060857] systemd[1]: Started Load/Save Screen Backlight Brightness of backlight:intel_backlight.
[ +0,041531] mousedev: PS/2 mouse device common for all mice
[ +0,043955] Adding 6291452k swap on /dev/sda6. Priority:-1 extents:1 across:6291452k FS
[ +0,002911] systemd[1]: Activated swap Swap Partition.
[ +0,000152] systemd[1]: Activated swap /dev/disk/by-label/swap.
[ +0,001882] systemd[1]: Reached target Swap.
[ +0,073862] intel_rapl: Found RAPL domain package
[ +0,000007] intel_rapl: Found RAPL domain core
[ +0,000004] intel_rapl: Found RAPL domain uncore
[ +0,000011] intel_rapl: RAPL package 0 domain package locked by BIOS
[ +0,043618] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ +0,000359] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ +0,000087] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ +0,000087] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ +0,038239] systemd[1]: Reached target Sound Card.
[ +0,106966] systemd[1]: Started Load/Save RF Kill Switch Status.
[ +0,108956] wl: module license 'Mixed/Proprietary' taints kernel.
[ +0,000005] Disabling lock debugging due to kernel taint
[ +0,037425] wlan0: Broadcom BCM4365 802.11 Hybrid Wireless Controller 6.30.223.271 (r587334)
[ +0,053750] wl 0000:02:00.0 wlp2s0: renamed from wlan0
[ +0,030735] FAT-fs (sda2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ +0,001134] systemd[1]: Mounted /boot.
[ +0,001976] systemd[1]: Reached target Local File Systems.
[ +0,811375] media: Linux media interface: v0.10
[ +0,062855] Bluetooth: Core ver 2.21
[ +0,000035] NET: Registered protocol family 31
[ +0,000004] Bluetooth: HCI device and connection manager initialized
[ +0,000007] Bluetooth: HCI socket layer initialized
[ +0,000006] Bluetooth: L2CAP socket layer initialized
[ +0,000012] Bluetooth: SCO socket layer initialized
[ +0,016895] Linux video capture interface: v2.00
[ +0,043575] usbcore: registered new interface driver btusb
[ +0,030779] systemd[1]: Reached target Bluetooth.
[ +0,019022] usb 1-1.2: ath9k_htc: Firmware ath9k_htc/htc_9271-1.4.0.fw requested
[ +0,000149] usbcore: registered new interface driver ath9k_htc
[ +0,062936] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (0bda:5728)
[ +0,002931] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input13
[ +0,000216] usbcore: registered new interface driver uvcvideo
[ +0,000006] USB Video Class driver (1.1.1)
[ +0,340291] usb 1-1.2: ath9k_htc: Transferred FW: ath9k_htc/htc_9271-1.4.0.fw, size: 51008
[ +0,251903] ath9k_htc 1-1.2:1.0: ath9k_htc: HTC initialized with 33 credits
[ +0,239450] ath9k_htc 1-1.2:1.0: ath9k_htc: FW Version: 1.4
[ +0,000007] ath9k_htc 1-1.2:1.0: FW RMW support: On
[ +0,000003] ath: EEPROM regdomain: 0x809c
[ +0,000002] ath: EEPROM indicates we should expect a country code
[ +0,000004] ath: doing EEPROM country->regdmn map search
[ +0,000001] ath: country maps to regdmn code: 0x52
[ +0,000003] ath: Country alpha2 being used: CN
[ +0,000001] ath: Regpair used: 0x52
[ +0,163240] ieee80211 phy1: Atheros AR9271 Rev:1
[ +0,110352] ath9k_htc 1-1.2:1.0 wlp0s26u1u2: renamed from wlan0
[ +0,015370] systemd[1]: Found device AR9271 802.11n.
[ +0,502638] systemd[1]: Started Journal Service.
[ +0,078757] systemd-journald[174]: Received request to flush runtime journal from PID 1
[ +0,188626] Bluetooth: hci0 command 0x1001 tx timeout
[ +7,996807] Bluetooth: hci0: BCM: Reading local version info failed (-110)
[ +0,094573] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u2: link is not ready
[ +1,209511] wlp0s26u1u2: authenticate with 88:f7:c7:dd:26:d3
[ +0,260718] wlp0s26u1u2: send auth to 88:f7:c7:dd:26:d3 (try 1/3)
[ +0,001925] wlp0s26u1u2: authenticated
[ +0,003309] wlp0s26u1u2: associate with 88:f7:c7:dd:26:d3 (try 1/3)
[ +0,003686] wlp0s26u1u2: RX AssocResp from 88:f7:c7:dd:26:d3 (capab=0x1411 status=0 aid=6)
[ +0,008782] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s26u1u2: link becomes ready
[ +0,000141] wlp0s26u1u2: associated
[Mär25 11:39] wlp0s26u1u2: deauthenticating from 88:f7:c7:dd:26:d3 by local choice (Reason: 3=DEAUTH_LEAVING)
[Mär25 11:41] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000008] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000210] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000003] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000036] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000002] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000260] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000003] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000032] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000002] ERROR @wl_cfg80211_get_tx_power : error (-1)
[Mär25 11:43] IPv6: ADDRCONF(NETDEV_UP): wlp0s26u1u2: link is not ready
[ +1,207577] wlp0s26u1u2: authenticate with 88:f7:c7:dd:26:d3
[ +0,264530] wlp0s26u1u2: send auth to 88:f7:c7:dd:26:d3 (try 1/3)
[ +0,002070] wlp0s26u1u2: authenticated
[ +0,002888] wlp0s26u1u2: associate with 88:f7:c7:dd:26:d3 (try 1/3)
[ +0,005241] wlp0s26u1u2: RX AssocResp from 88:f7:c7:dd:26:d3 (capab=0x1411 status=0 aid=6)
[ +0,008732] IPv6: ADDRCONF(NETDEV_CHANGE): wlp0s26u1u2: link becomes ready
[ +0,000105] wlp0s26u1u2: associated
[Mär25 11:46] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000009] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000223] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000003] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000030] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000002] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000208] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000003] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000039] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000005] ERROR @wl_cfg80211_get_tx_power : error (-1)
[Mär25 11:48] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000008] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000199] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000003] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000030] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000003] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000221] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000003] ERROR @wl_cfg80211_get_tx_power : error (-1)
[ +0,000028] ERROR @wl_dev_intvar_get : error (-1)
[ +0,000002] ERROR @wl_cfg80211_get_tx_power : error (-1)Last edited by gdm_problem (2016-03-25 19:10:18)
Offline
#2 2016-03-25 18:53:39
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 19,784
Re: [SOLVED] Broadcom-NIC suddenly broken
rfkill: WLAN soft blockedHave you rfkill installed?
What is the output of rfkill list ?
If it is soft blocked, can you use that tool to unblock it?
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline
#3 2016-03-25 19:09:42
- gdm_problem
- Member
- Registered: 2015-12-18
- Posts: 19
Re: [SOLVED] Broadcom-NIC suddenly broken
It wasnt installed.
I installed it now, and did rfkill list. That's the output:
0: ideapad_wlan: Wireless LAN
Soft blocked: yes
Hard blocked: no
1: ideapad_bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: phy0: Wireless LAN
Soft blocked: yes
Hard blocked: no
3: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
4: phy1: Wireless LAN
Soft blocked: no
Hard blocked: noI got to know, that phy0 is the integrated nic, and I unblocked it, now it works!
Many, many thanks! I still do not know why it was software-blocked, I mean rfkill wasnt
installed and I cant remember on doing that.
But anyways, now it works and I got to learn a new tool.
Offline
#4 2016-03-25 19:16:49
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 19,784
Re: [SOLVED] Broadcom-NIC suddenly broken
The program rfkill is a user space tool that exposes setting in the kernel and modules. The Rfkill function is in the modules whether or not the user space tools are installed. Something happened to put it into the soft blocked state, could be many things. Does your system have an airplane mode function? Sometimes they will set the soft block. Perhaps it got set as a function of updating the module.
Last edited by ewaller (2016-03-25 19:17:15)
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Offline