You are not logged in.
Pages: 1
Hi, I installed my System a few months back and everything works great, the forum + wiki were really helpful and i found everything that didn't work quite easily.
Unfortunately i ran into an issue today. I noticed some kind of screen tearing on my desktop monitor. I googled and used the wiki and found Tear-free video section of the intel graphics arch wiki page. As that seemed to be my Problem I quickly created a 20-intel.conf as mentioned on the page (Up to this point everything worked without one). When I now load the System it gets stuck "Reached target Graphical Interface". This is the conf I used:
Section "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "TearFree" "true"
EndSection
It hangs there with and without the TearFree option line. Hope anyone has an Idea.
Ohh, and I'm sure that I only have the intel onboard graphic
Thanks in advance
Neproc
Last edited by Neproc (2016-05-20 08:49:14)
Offline
Ohh, and I'm sure that I only have the intel onboard graphic
Not that I don't believe you but can we please see the output of:
lspci -vnn | grep '\''[030[02]\]'
Last edited by Head_on_a_Stick (2016-05-19 21:37:37)
Offline
Sure
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
Offline
What does the Xorg log file for the hung session say?
Offline
Should have known that there is a log file, give me a sec
Offline
[ 62887.373] _XSERVTransSocketUNIXCreateListener: ...SocketCreateListener() failed
[ 62887.373] _XSERVTransMakeAllCOTSServerListeners: server already running
[ 62887.407] (--) Log file renamed from "/var/log/Xorg.pid-14222.log" to "/var/log/Xorg.1.log"
[ 62887.416]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 62887.416] X Protocol Version 11, Revision 0
[ 62887.416] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 62887.416] Current Operating System: Linux manticore 4.5.1-1-ARCH #1 SMP PREEMPT Thu Apr 14 19:19:32 CEST 2016 x86_64
[ 62887.416] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dffdd211-23d9-403a-9d74-a4709d6095b0 rw quiet
[ 62887.416] Build Date: 05 April 2016 05:24:02PM
[ 62887.416]
[ 62887.416] Current version of pixman: 0.34.0
[ 62887.416] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 62887.416] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 62887.416] (==) Log file: "/var/log/Xorg.1.log", Time: Tue May 17 09:02:06 2016
[ 62887.457] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 62887.458] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 62887.490] (==) No Layout section. Using the first Screen section.
[ 62887.490] (==) No screen section available. Using defaults.
[ 62887.490] (**) |-->Screen "Default Screen Section" (0)
[ 62887.490] (**) | |-->Monitor "<default monitor>"
[ 62887.490] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 62887.490] (==) Automatically adding devices
[ 62887.490] (==) Automatically enabling devices
[ 62887.490] (==) Automatically adding GPU devices
[ 62887.490] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 62887.510] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 62887.510] Entry deleted from font path.
[ 62887.510] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 62887.510] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 62887.510] Entry deleted from font path.
[ 62887.510] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 62887.510] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 62887.510] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 62887.510] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 62887.510] (II) Loader magic: 0x819d20
[ 62887.510] (II) Module ABI versions:
[ 62887.510] X.Org ANSI C Emulation: 0.4
[ 62887.510] X.Org Video Driver: 20.0
[ 62887.510] X.Org XInput driver : 22.1
[ 62887.510] X.Org Server Extension : 9.0
[ 62887.512] (++) using VT number 2
[ 62887.512] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 62887.513] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 62887.513] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 62887.517] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e5 rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 62887.517] (--) PCI: (0:0:2:1) 8086:2a43:17aa:20e5 rev 7, Mem @ 0xf4200000/1048576
[ 62887.517] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 62887.517] (II) LoadModule: "glx"
[ 62887.530] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 62887.554] (II) Module glx: vendor="X.Org Foundation"
[ 62887.554] compiled for 1.18.3, module version = 1.0.0
[ 62887.554] ABI class: X.Org Server Extension, version 9.0
[ 62887.554] (==) AIGLX enabled
[ 62887.554] (==) Matched intel as autoconfigured driver 0
[ 62887.554] (==) Matched modesetting as autoconfigured driver 1
[ 62887.554] (==) Matched fbdev as autoconfigured driver 2
[ 62887.554] (==) Matched vesa as autoconfigured driver 3
[ 62887.554] (==) Assigned the driver to the xf86ConfigLayout
[ 62887.554] (II) LoadModule: "intel"
[ 62887.554] (WW) Warning, couldn't open module intel
[ 62887.554] (II) UnloadModule: "intel"
[ 62887.554] (II) Unloading intel
[ 62887.555] (EE) Failed to load module "intel" (module does not exist, 0)
[ 62887.555] (II) LoadModule: "modesetting"
[ 62887.555] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 62887.555] (II) Module modesetting: vendor="X.Org Foundation"
[ 62887.555] compiled for 1.18.3, module version = 1.18.3
[ 62887.555] Module class: X.Org Video Driver
[ 62887.555] ABI class: X.Org Video Driver, version 20.0
[ 62887.555] (II) LoadModule: "fbdev"
[ 62887.555] (WW) Warning, couldn't open module fbdev
[ 62887.555] (II) UnloadModule: "fbdev"
[ 62887.555] (II) Unloading fbdev
[ 62887.555] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 62887.555] (II) LoadModule: "vesa"
[ 62887.555] (WW) Warning, couldn't open module vesa
[ 62887.555] (II) UnloadModule: "vesa"
[ 62887.555] (II) Unloading vesa
[ 62887.555] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 62887.556] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 62888.373] (**) modeset(0): claimed PCI slot 0@0:2:0
[ 62888.373] (II) modeset(0): using default device
[ 62888.374] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 62888.374] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 62888.374] (==) modeset(0): RGB weight 888
[ 62888.374] (==) modeset(0): Default visual is TrueColor
[ 62888.374] (II) Loading sub module "glamoregl"
[ 62888.374] (II) LoadModule: "glamoregl"
[ 62888.374] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 62888.421] (II) Module glamoregl: vendor="X.Org Foundation"
[ 62888.421] compiled for 1.18.3, module version = 1.0.0
[ 62888.421] ABI class: X.Org ANSI C Emulation, version 0.4
[ 62888.421] (II) glamor: OpenGL accelerated X.org driver based.
[ 62888.442] (II) glamor: EGL version 1.4 (DRI2):
[ 62888.449] (II) modeset(0): glamor initialized
[ 62888.449] (II) modeset(0): Output LVDS-1 has no monitor section
[ 62888.464] (II) modeset(0): Output VGA-1 has no monitor section
[ 62888.470] (II) modeset(0): Output HDMI-1 has no monitor section
[ 62888.493] (II) modeset(0): Output DP-1 has no monitor section
[ 62888.493] (II) modeset(0): Output DP-2 has no monitor section
[ 62888.506] (II) modeset(0): EDID for output LVDS-1
[ 62888.506] (II) modeset(0): Manufacturer: LEN Model: 4050 Serial#: 0
[ 62888.506] (II) modeset(0): Year: 2006 Week: 0
[ 62888.506] (II) modeset(0): EDID Version: 1.3
[ 62888.506] (II) modeset(0): Digital Display Input
[ 62888.506] (II) modeset(0): Max Image Size [cm]: horiz.: 33 vert.: 21
[ 62888.506] (II) modeset(0): Gamma: 2.20
[ 62888.507] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[ 62888.507] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 62888.507] (II) modeset(0): First detailed timing is preferred mode
[ 62888.507] (II) modeset(0): redX: 0.590 redY: 0.340 greenX: 0.320 greenY: 0.550
[ 62888.507] (II) modeset(0): blueX: 0.152 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 62888.507] (II) modeset(0): Manufacturer's mask: 0
[ 62888.507] (II) modeset(0): Supported detailed timing:
[ 62888.507] (II) modeset(0): clock: 71.1 MHz Image Size: 331 x 207 mm
[ 62888.507] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1440 h_border: 0
[ 62888.507] (II) modeset(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
[ 62888.507] (II) modeset(0): Supported detailed timing:
[ 62888.507] (II) modeset(0): clock: 60.1 MHz Image Size: 331 x 207 mm
[ 62888.507] (II) modeset(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1457 h_border: 0
[ 62888.507] (II) modeset(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 825 v_border: 0
[ 62888.507] (II) modeset(0): Unknown vendor-specific block f
[ 62888.507] (II) modeset(0): LTN154X3-L02
[ 62888.507] (II) modeset(0): EDID (in hex):
[ 62888.507] (II) modeset(0): 00ffffffffffff0030ae504000000000
[ 62888.507] (II) modeset(0): 0010010380211578ea03159757528c27
[ 62888.507] (II) modeset(0): 21505400000001010101010101010101
[ 62888.507] (II) modeset(0): 010101010101c71b00a0502017303020
[ 62888.507] (II) modeset(0): 36004bcf100000197a1700b150201930
[ 62888.507] (II) modeset(0): 302036004bcf100000190000000f0081
[ 62888.507] (II) modeset(0): 0a32810a281401004ca35833000000fe
[ 62888.507] (II) modeset(0): 004c544e31353458332d4c30320a00c2
[ 62888.507] (II) modeset(0): Printing probed modes for output LVDS-1
[ 62888.507] (II) modeset(0): Modeline "1280x800"x60.0 71.11 1280 1328 1360 1440 800 803 809 823 -hsync -vsync (49.4 kHz eP)
[ 62888.507] (II) modeset(0): Modeline "1280x800"x50.0 60.10 1280 1328 1360 1457 800 803 809 825 -hsync -vsync (41.2 kHz e)
[ 62888.507] (II) modeset(0): Modeline "1024x768"x120.1 133.47 1024 1100 1212 1400 768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[ 62888.507] (II) modeset(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
[ 62888.507] (II) modeset(0): Modeline "960x720"x120.0 117.00 960 1024 1128 1300 720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[ 62888.507] (II) modeset(0): Modeline "928x696"x120.1 109.15 928 976 1088 1264 696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[ 62888.507] (II) modeset(0): Modeline "896x672"x120.0 102.40 896 960 1060 1224 672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[ 62888.507] (II) modeset(0): Modeline "800x600"x120.0 81.00 800 832 928 1080 600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[ 62888.507] (II) modeset(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
[ 62888.507] (II) modeset(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
[ 62888.507] (II) modeset(0): Modeline "700x525"x120.0 61.00 700 744 820 940 525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[ 62888.507] (II) modeset(0): Modeline "640x512"x120.0 54.00 640 664 720 844 512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[ 62888.507] (II) modeset(0): Modeline "640x480"x120.0 54.00 640 688 744 900 480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[ 62888.507] (II) modeset(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
[ 62888.507] (II) modeset(0): Modeline "512x384"x120.0 32.50 512 524 592 672 384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[ 62888.507] (II) modeset(0): Modeline "400x300"x120.6 20.00 400 420 484 528 300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[ 62888.507] (II) modeset(0): Modeline "400x300"x112.7 18.00 400 412 448 512 300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[ 62888.507] (II) modeset(0): Modeline "320x240"x120.1 12.59 320 328 376 400 240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[ 62888.521] (II) modeset(0): EDID for output VGA-1
[ 62888.527] (II) modeset(0): EDID for output HDMI-1
[ 62888.550] (II) modeset(0): EDID for output DP-1
[ 62888.550] (II) modeset(0): EDID for output DP-2
[ 62888.550] (II) modeset(0): Output LVDS-1 connected
[ 62888.550] (II) modeset(0): Output VGA-1 disconnected
[ 62888.550] (II) modeset(0): Output HDMI-1 disconnected
[ 62888.550] (II) modeset(0): Output DP-1 disconnected
[ 62888.550] (II) modeset(0): Output DP-2 disconnected
[ 62888.550] (II) modeset(0): Using exact sizes for initial modes
[ 62888.550] (II) modeset(0): Output LVDS-1 using initial mode 1280x800 +0+0
[ 62888.550] (II) modeset(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 62888.550] (==) modeset(0): DPI set to (96, 96)
[ 62888.550] (II) Loading sub module "fb"
[ 62888.550] (II) LoadModule: "fb"
[ 62888.550] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 62888.563] (II) Module fb: vendor="X.Org Foundation"
[ 62888.563] compiled for 1.18.3, module version = 1.0.0
[ 62888.563] ABI class: X.Org ANSI C Emulation, version 0.4
[ 62888.563] (==) Depth 24 pixmap format is 32 bpp
[ 62888.747] (==) modeset(0): Backing store enabled
[ 62888.747] (==) modeset(0): Silken mouse enabled
[ 62888.747] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 62888.748] (==) modeset(0): DPMS enabled
[ 62888.748] (II) modeset(0): [DRI2] Setup complete
[ 62888.748] (II) modeset(0): [DRI2] DRI driver: i965
[ 62888.748] (II) modeset(0): [DRI2] VDPAU driver: i965
[ 62889.361] (--) RandR disabled
[ 62889.376] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 62889.376] (II) AIGLX: enabled GLX_ARB_create_context
[ 62889.376] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 62889.376] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 62889.376] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 62889.376] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 62889.376] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 62889.376] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 62889.376] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 62889.376] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 62889.376] (II) AIGLX: Loaded and initialized i965
[ 62889.376] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 62889.377] (II) modeset(0): Damage tracking initialized
[ 62889.377] (II) modeset(0): Setting screen physical size to 338 x 211
[ 62890.018] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 62890.018] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 62890.018] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 62890.018] (II) LoadModule: "libinput"
[ 62890.018] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 62890.040] (II) Module libinput: vendor="X.Org Foundation"
[ 62890.040] compiled for 1.18.3, module version = 0.19.0
[ 62890.040] Module class: X.Org XInput Driver
[ 62890.040] ABI class: X.Org XInput driver, version 22.1
[ 62890.040] (II) Using input driver 'libinput' for 'Power Button'
[ 62890.040] (**) Power Button: always reports core events
[ 62890.040] (**) Option "Device" "/dev/input/event3"
[ 62890.040] (**) Option "_source" "server/udev"
[ 62890.041] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 62890.041] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 62890.063] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 62890.064] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 62890.064] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 62890.064] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 62890.065] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 62890.065] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 62890.065] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 62890.065] (II) Using input driver 'libinput' for 'Video Bus'
[ 62890.065] (**) Video Bus: always reports core events
[ 62890.065] (**) Option "Device" "/dev/input/event5"
[ 62890.065] (**) Option "_source" "server/udev"
[ 62890.065] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[ 62890.065] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[ 62890.077] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6/event5"
[ 62890.077] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 62890.077] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[ 62890.078] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[ 62890.078] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 62890.078] (II) No input driver specified, ignoring this device.
[ 62890.078] (II) This device may have been added with another device file.
[ 62890.078] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 62890.079] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 62890.079] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 62890.079] (II) Using input driver 'libinput' for 'Sleep Button'
[ 62890.079] (**) Sleep Button: always reports core events
[ 62890.079] (**) Option "Device" "/dev/input/event2"
[ 62890.079] (**) Option "_source" "server/udev"
[ 62890.079] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 62890.079] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 62890.107] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 62890.107] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[ 62890.107] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 62890.107] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 62890.108] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 62890.108] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 62890.108] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 62890.108] (II) config/udev: Adding input device HDA Intel Dock Headphone (/dev/input/event9)
[ 62890.109] (II) No input driver specified, ignoring this device.
[ 62890.109] (II) This device may have been added with another device file.
[ 27.427] (--) Log file renamed from "/var/log/Xorg.pid-576.log" to "/var/log/Xorg.0.log"
[ 27.428]
X.Org X Server 1.18.3
Release Date: 2016-04-04
[ 27.428] X Protocol Version 11, Revision 0
[ 27.428] Build Operating System: Linux 4.2.5-1-ARCH x86_64
[ 27.428] Current Operating System: Linux manticore 4.5.4-1-ARCH #1 SMP PREEMPT Wed May 11 22:21:28 CEST 2016 x86_64
[ 27.428] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=dffdd211-23d9-403a-9d74-a4709d6095b0 rw
[ 27.428] Build Date: 05 April 2016 05:24:02PM
[ 27.428]
[ 27.428] Current version of pixman: 0.34.0
[ 27.428] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.428] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.428] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 19 22:49:46 2016
[ 27.428] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.428] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 27.428] (==) No Layout section. Using the first Screen section.
[ 27.428] (==) No screen section available. Using defaults.
[ 27.428] (**) |-->Screen "Default Screen Section" (0)
[ 27.428] (**) | |-->Monitor "<default monitor>"
[ 27.428] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 27.428] (**) | |-->Device "Intel Graphics"
[ 27.428] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 27.428] (==) Automatically adding devices
[ 27.428] (==) Automatically enabling devices
[ 27.428] (==) Automatically adding GPU devices
[ 27.428] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 27.428] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 27.428] Entry deleted from font path.
[ 27.428] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 27.428] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 27.428] Entry deleted from font path.
[ 27.428] Entry deleted from font path.
[ 27.428] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 27.428] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 27.428] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 27.428] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 27.428] (II) Loader magic: 0x819d20
[ 27.428] (II) Module ABI versions:
[ 27.428] X.Org ANSI C Emulation: 0.4
[ 27.428] X.Org Video Driver: 20.0
[ 27.428] X.Org XInput driver : 22.1
[ 27.428] X.Org Server Extension : 9.0
[ 27.429] (++) using VT number 1
[ 27.429] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 27.430] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 27.433] (--) PCI:*(0:0:2:0) 8086:2a42:17aa:20e5 rev 7, Mem @ 0xf4400000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 27.433] (--) PCI: (0:0:2:1) 8086:2a43:17aa:20e5 rev 7, Mem @ 0xf4200000/1048576
[ 27.433] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 27.433] (II) LoadModule: "glx"
[ 27.434] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.436] (II) Module glx: vendor="X.Org Foundation"
[ 27.436] compiled for 1.18.3, module version = 1.0.0
[ 27.436] ABI class: X.Org Server Extension, version 9.0
[ 27.436] (==) AIGLX enabled
[ 27.436] (II) LoadModule: "intel"
[ 27.436] (WW) Warning, couldn't open module intel
[ 27.436] (II) UnloadModule: "intel"
[ 27.436] (II) Unloading intel
[ 27.436] (EE) Failed to load module "intel" (module does not exist, 0)
[ 27.436] (EE) No drivers available.
[ 27.436] (EE)
Fatal server error:
[ 27.436] (EE) no screens found(EE)
[ 27.436] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 27.436] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 27.436] (EE)
That is the bottom part with the error, is that enough or do you want the hole thing?
Edit: ok, I put the hole thing in now
Last edited by Neproc (2016-05-19 21:55:33)
Offline
is that enough or do you want the hole thing?
Offline
Ok, found the Problem with the help of the log file, it seems I was stupid and forgot to install the intel driver itself. Mesa was installed but I was missing the "xf86-video-intel" package.
Thanks for your help
Offline
Pages: 1