You are not logged in.
- Topics: Active | Unanswered
#1 2016-07-09 13:23:29
- TheGasolineWillBeOurs
- Member
- Registered: 2015-02-06
- Posts: 65
[SOLVED] Wireless highly unreliable
My Wi-Fi connection is highly unreliable. Sometimes it works for a few minutes before it drops, sometimes only a few seconds. Once the connection drops, I cannot do anything to get a working wireless again, except restarting the router. I know this seems to point on a faulty router, but other devices just work fine when connected to the router. I don't know how exactly to tackle this problem. Here's some more information:
dmesg (note that the connection dropped between 12s and 99s after restart):
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.14-1-lts (builduser@andyrtr) (gcc version 6.1.1 20160602 (GCC) ) #1 SMP Fri Jun 24 21:35:25 CEST 2016
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=1208e75c-3f1b-479c-ad7e-9186fe832487 rw quiet
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009cb7efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009cb7f000-0x000000009d27efff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000009d27f000-0x000000009de7efff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009de7f000-0x000000009df7efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009df7f000-0x000000009dffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009dfff000-0x000000009dffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffdb0000-0x00000000ffdcefff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023edfffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.10 by HPQ
[ 0.000000] efi: ACPI=0x9dffe000 ACPI 2.0=0x9dffe014 SMBIOS=0x9d32e218
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Hewlett-Packard HP EliteBook 840 G1/198F, BIOS L71 Ver. 01.21 09/03/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x23ee00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 00FF800000 mask 7FFF800000 write-protect
[ 0.000000] 1 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 2 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 3 base 009F000000 mask 7FFF000000 uncachable
[ 0.000000] 4 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 5 base 0200000000 mask 7FC0000000 write-back
[ 0.000000] 6 base 023F000000 mask 7FFF000000 uncachable
[ 0.000000] 7 base 023EE00000 mask 7FFFE00000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x9e000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01b43000, 0x01b43fff] PGTABLE
[ 0.000000] BRK [0x01b44000, 0x01b44fff] PGTABLE
[ 0.000000] BRK [0x01b45000, 0x01b45fff] PGTABLE
[ 0.000000] BRK [0x01b46000, 0x01b46fff] PGTABLE
[ 0.000000] BRK [0x01b47000, 0x01b47fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x378f0000-0x37c6ffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009DFFE014 000024 (v02 HPQOEM)
[ 0.000000] ACPI: XSDT 0x000000009DFFE120 0000AC (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009DFFC000 00010C (v05 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: DSDT 0x000000009DFD1000 025472 (v02 HPQOEM 198F 00000001 INTL 20110112)
[ 0.000000] ACPI: FACS 0x000000009DDE4000 000040
[ 0.000000] ACPI: FACS 0x000000009DDE4000 000040
[ 0.000000] ACPI: HPET 0x000000009DFFB000 000038 (v01 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: APIC 0x000000009DFFA000 0000BC (v01 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: MCFG 0x000000009DFF9000 00003C (v01 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: TCPA 0x000000009DFF7000 000032 (v02 HPQOEM 198F 00000000 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000009DFCE000 000313 (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFCD000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[ 0.000000] ACPI: MSDM 0x000000009DFCC000 000055 (v03 HPQOEM SLIC-MPC 00000000 HP 00000001)
[ 0.000000] ACPI: FPDT 0x000000009DFCB000 000044 (v01 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: BGRT 0x000000009DFCA000 000038 (v00 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: SSDT 0x000000009DFC6000 000466 (v01 Isct IsctAsl 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC5000 000544 (v01 PmRef Cpu0Ist 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC4000 000AF3 (v01 PmRef CpuPm 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC3000 0001D5 (v01 PmRef LakeTiny 00003000 INTL 20110112)
[ 0.000000] ACPI: SSDT 0x000000009DFC2000 000706 (v01 SaSsdt SaSsdt 00003000 INTL 20110112)
[ 0.000000] ACPI: ASF! 0x000000009DFF8000 0000A5 (v32 HPQOEM 198F 00000001 HP 00000001)
[ 0.000000] ACPI: DMAR 0x000000009DFC1000 0000B0 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023edfffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x23edfa000-0x23edfdfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000023edfffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000057fff]
[ 0.000000] node 0: [mem 0x0000000000059000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009cb7efff]
[ 0.000000] node 0: [mem 0x000000009dfff000-0x000000009dffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000023edfffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023edfffff]
[ 0.000000] On node 0 totalpages: 1947931
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3995 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9966 pages used for memmap
[ 0.000000] DMA32 zone: 637824 pages, LIFO batch:31
[ 0.000000] Normal zone: 20408 pages used for memmap
[ 0.000000] Normal zone: 1306112 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x9f200000-0xbf1fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9cb7f000-0x9d27efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9d27f000-0x9de7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9de7f000-0x9df7efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9df7f000-0x9dffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e000000-0x9f1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f200000-0xbf1fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffdaffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffdb0000-0xffdcefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffdcf000-0xffffffff]
[ 0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 32 pages/cpu @ffff88023ea00000 s92376 r8192 d30504 u262144
[ 0.000000] pcpu-alloc: s92376 r8192 d30504 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1917471
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=1208e75c-3f1b-479c-ad7e-9186fe832487 rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 7494292K/7791724K available (5705K kernel code, 951K rwdata, 1824K rodata, 1200K init, 1156K bss, 297432K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2693.752 MHz processor
[ 0.000033] Calibrating delay loop (skipped), value calculated using timer frequency.. 5387.50 BogoMIPS (lpj=26937520)
[ 0.000036] pid_max: default: 32768 minimum: 301
[ 0.000042] ACPI: Core revision 20150930
[ 0.015632] ACPI: 8 ACPI AML tables successfully acquired and loaded
[ 0.033269] Security Framework initialized
[ 0.033273] Yama: becoming mindful.
[ 0.033840] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.035643] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.036413] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.036423] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.036657] Initializing cgroup subsys io
[ 0.036661] Initializing cgroup subsys memory
[ 0.036666] Initializing cgroup subsys devices
[ 0.036669] Initializing cgroup subsys freezer
[ 0.036671] Initializing cgroup subsys net_cls
[ 0.036673] Initializing cgroup subsys pids
[ 0.036696] CPU: Physical Processor ID: 0
[ 0.036697] CPU: Processor Core ID: 0
[ 0.036702] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.036703] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.037755] mce: CPU supports 7 MCE banks
[ 0.037769] CPU0: Thermal monitoring enabled (TM1)
[ 0.037778] process: using mwait in idle threads
[ 0.037781] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.037782] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.038128] Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
[ 0.057047] ftrace: allocating 22861 entries in 90 pages
[ 0.067304] DMAR: Host address width 39
[ 0.067307] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.067313] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.067314] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.067318] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.067320] DMAR: RMRR base: 0x0000009dd18000 end: 0x0000009dd37fff
[ 0.067321] DMAR: RMRR base: 0x0000009f000000 end: 0x000000bf1fffff
[ 0.067323] DMAR-IR: IOAPIC id 0 under DRHD base 0xfed91000 IOMMU 1
[ 0.067325] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[ 0.067326] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.067704] DMAR-IR: Enabled IRQ remapping in x2apic mode
[ 0.067706] x2apic enabled
[ 0.067711] Switched APIC routing to cluster x2apic.
[ 0.068332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.168346] TSC deadline timer enabled
[ 0.168349] smpboot: CPU0: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.168377] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.168400] ... version: 3
[ 0.168401] ... bit width: 48
[ 0.168402] ... generic registers: 4
[ 0.168403] ... value mask: 0000ffffffffffff
[ 0.168404] ... max period: 0000ffffffffffff
[ 0.168404] ... fixed-purpose events: 3
[ 0.168405] ... event mask: 000000070000000f
[ 0.168937] x86: Booting SMP configuration:
[ 0.168939] .... node #0, CPUs: #1 #2 #3
[ 0.179828] x86: Booted up 1 node, 4 CPUs
[ 0.179832] smpboot: Total of 4 processors activated (21550.01 BogoMIPS)
[ 0.184683] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.184868] devtmpfs: initialized
[ 0.187311] PM: Registering ACPI NVS region [mem 0x9de7f000-0x9df7efff] (1048576 bytes)
[ 0.187407] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.187492] pinctrl core: initialized pinctrl subsystem
[ 0.187536] RTC time: 12:55:13, date: 07/09/16
[ 0.187657] NET: Registered protocol family 16
[ 0.209850] cpuidle: using governor ladder
[ 0.236225] cpuidle: using governor menu
[ 0.236263] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.236265] ACPI: bus type PCI registered
[ 0.236266] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.236341] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.236343] PCI: not using MMCONFIG
[ 0.236345] PCI: Using configuration type 1 for base access
[ 0.236568] perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.260133] ACPI: Added _OSI(Module Device)
[ 0.260135] ACPI: Added _OSI(Processor Device)
[ 0.260136] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.260138] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.270435] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.273410] ACPI: Dynamic OEM Table Load:
[ 0.273419] ACPI: SSDT 0xFFFF880235168800 0003F3 (v01 PmRef Cpu0Cst 00003001 INTL 20110112)
[ 0.274149] ACPI: Dynamic OEM Table Load:
[ 0.274156] ACPI: SSDT 0xFFFF880235072800 0005DB (v01 PmRef ApIst 00003000 INTL 20110112)
[ 0.274926] ACPI: Dynamic OEM Table Load:
[ 0.274932] ACPI: SSDT 0xFFFF880235067E00 000119 (v01 PmRef ApCst 00003000 INTL 20110112)
[ 0.276126] ACPI : EC: EC started
[ 1.912197] ACPI: Interpreter enabled
[ 1.912206] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[ 1.912212] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[ 1.912228] ACPI: (supports S0 S3 S4 S5)
[ 1.912230] ACPI: Using IOAPIC for interrupt routing
[ 1.912251] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 1.912626] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 1.912641] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 1.913941] ACPI: Power Resource [APPR] (off)
[ 1.915896] ACPI: Power Resource [COMP] (on)
[ 1.916077] ACPI: Power Resource [LPP] (on)
[ 1.917246] ACPI: Power Resource [PXP6] (on)
[ 2.042705] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 2.042711] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 2.044271] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 2.044273] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 2.044748] PCI host bridge to bus 0000:00
[ 2.044751] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 2.044753] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 2.044754] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 2.044756] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
[ 2.044758] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed3ffff window]
[ 2.044759] pci_bus 0000:00: root bus resource [mem 0xfed45000-0xfedfffff window]
[ 2.044761] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[ 2.044763] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 2.044771] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 2.044892] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 2.044907] pci 0000:00:02.0: reg 0x10: [mem 0xd0000000-0xd03fffff 64bit]
[ 2.044914] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 2.044919] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 2.045042] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 2.045055] pci 0000:00:03.0: reg 0x10: [mem 0xd0730000-0xd0733fff 64bit]
[ 2.045184] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 2.045206] pci 0000:00:14.0: reg 0x10: [mem 0xd0720000-0xd072ffff 64bit]
[ 2.045250] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 2.045314] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 2.045351] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 2.045379] pci 0000:00:16.0: reg 0x10: [mem 0xd0739000-0xd073901f 64bit]
[ 2.045440] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 2.045534] pci 0000:00:16.3: [8086:9c3d] type 00 class 0x070002
[ 2.045557] pci 0000:00:16.3: reg 0x10: [io 0x30b0-0x30b7]
[ 2.045563] pci 0000:00:16.3: reg 0x14: [mem 0xd073f000-0xd073ffff]
[ 2.045701] pci 0000:00:19.0: [8086:155a] type 00 class 0x020000
[ 2.045723] pci 0000:00:19.0: reg 0x10: [mem 0xd0700000-0xd071ffff]
[ 2.045731] pci 0000:00:19.0: reg 0x14: [mem 0xd073e000-0xd073efff]
[ 2.045738] pci 0000:00:19.0: reg 0x18: [io 0x3080-0x309f]
[ 2.045787] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 2.045848] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 2.045886] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 2.045907] pci 0000:00:1b.0: reg 0x10: [mem 0xd0734000-0xd0737fff 64bit]
[ 2.045958] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.046056] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
[ 2.046121] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.046253] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 2.046320] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 2.046414] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 2.046451] pci 0000:00:1c.5: [8086:9c1a] type 01 class 0x060400
[ 2.046517] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 2.046645] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 2.046670] pci 0000:00:1d.0: reg 0x10: [mem 0xd073d000-0xd073d3ff]
[ 2.046734] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 2.046798] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 2.046835] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 2.047034] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 2.047053] pci 0000:00:1f.2: reg 0x10: [io 0x30a8-0x30af]
[ 2.047060] pci 0000:00:1f.2: reg 0x14: [io 0x30bc-0x30bf]
[ 2.047066] pci 0000:00:1f.2: reg 0x18: [io 0x30a0-0x30a7]
[ 2.047073] pci 0000:00:1f.2: reg 0x1c: [io 0x30b8-0x30bb]
[ 2.047080] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 2.047086] pci 0000:00:1f.2: reg 0x24: [mem 0xd073c000-0xd073c7ff]
[ 2.047116] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.047206] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 2.047219] pci 0000:00:1f.3: reg 0x10: [mem 0xd0738000-0xd07380ff 64bit]
[ 2.047233] pci 0000:00:1f.3: reg 0x20: [io 0xef80-0xef9f]
[ 2.047368] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.047373] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 2.047442] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[ 2.047499] pci 0000:02:00.0: reg 0x10: [mem 0xd0500000-0xd0501fff 64bit]
[ 2.047644] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 2.047694] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 2.060345] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 2.060350] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
[ 2.060405] pci 0000:03:00.0: [10ec:5227] type 00 class 0xff0000
[ 2.060437] pci 0000:03:00.0: reg 0x10: [mem 0xd0400000-0xd0400fff]
[ 2.060539] pci 0000:03:00.0: supports D1 D2
[ 2.060541] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[ 2.080344] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 2.080349] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
[ 2.081240] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.081285] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.081326] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.081368] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.081409] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.081449] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.081490] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.081531] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 2.081891] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 2.081935] ACPI : EC: GPE = 0x6, I/O: command/status = 0x66, data = 0x62
[ 2.082023] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 2.082025] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 2.082028] vgaarb: loaded
[ 2.082029] vgaarb: bridge control possible 0000:00:02.0
[ 2.082145] PCI: Using ACPI for IRQ routing
[ 2.087504] PCI: pci_cache_line_size set to 64 bytes
[ 2.087544] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 2.087546] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 2.087547] e820: reserve RAM buffer [mem 0x9cb7f000-0x9fffffff]
[ 2.087548] e820: reserve RAM buffer [mem 0x9e000000-0x9fffffff]
[ 2.087550] e820: reserve RAM buffer [mem 0x23ee00000-0x23fffffff]
[ 2.087658] NetLabel: Initializing
[ 2.087660] NetLabel: domain hash size = 128
[ 2.087660] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.087672] NetLabel: unlabeled traffic allowed by default
[ 2.087698] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 2.087703] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 2.089731] clocksource: Switched to clocksource hpet
[ 2.095138] pnp: PnP ACPI init
[ 2.095355] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 2.095358] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[ 2.095360] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 2.095362] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 2.095364] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[ 2.095365] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 2.095367] system 00:00: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 2.095369] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 2.095371] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 2.095372] system 00:00: [mem 0xbf210000-0xbf21ffff] has been reserved
[ 2.095376] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.095530] system 00:01: [io 0x0200-0x027f] has been reserved
[ 2.095532] system 00:01: [io 0xffff] has been reserved
[ 2.095534] system 00:01: [io 0xffff] has been reserved
[ 2.095536] system 00:01: [io 0xffff] has been reserved
[ 2.095538] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 2.095539] system 00:01: [io 0xef80-0xef9f] has been reserved
[ 2.095542] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 2.095584] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 2.095727] pnp 00:03: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[ 2.095749] pnp 00:04: Plug and Play ACPI device, IDs SYN3003 SYN0100 SYN0002 PNP0f13 (active)
[ 2.096021] system 00:05: [mem 0x20000000-0x201fffff] could not be reserved
[ 2.096023] system 00:05: [mem 0x40004000-0x40004fff] could not be reserved
[ 2.096026] system 00:05: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 2.096270] pnp 00:06: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 2.096288] pnp: PnP ACPI: found 7 devices
[ 2.102371] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 2.102397] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 2.102400] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 2.102404] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 2.102406] pci 0000:00:1c.5: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 2.102408] pci 0000:00:1c.5: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 2.102410] pci 0000:00:1c.5: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 2.102418] pci 0000:00:1c.5: BAR 15: assigned [mem 0xbf300000-0xbf4fffff 64bit pref]
[ 2.102421] pci 0000:00:1c.5: BAR 13: assigned [io 0x2000-0x2fff]
[ 2.102423] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 2.102428] pci 0000:00:1c.0: bridge window [mem 0xd0600000-0xd06fffff]
[ 2.102435] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 2.102439] pci 0000:00:1c.3: bridge window [mem 0xd0500000-0xd05fffff]
[ 2.102446] pci 0000:00:1c.5: PCI bridge to [bus 03]
[ 2.102448] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 2.102452] pci 0000:00:1c.5: bridge window [mem 0xd0400000-0xd04fffff]
[ 2.102455] pci 0000:00:1c.5: bridge window [mem 0xbf300000-0xbf4fffff 64bit pref]
[ 2.102462] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 2.102463] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 2.102465] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 2.102467] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
[ 2.102468] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfed3ffff window]
[ 2.102470] pci_bus 0000:00: resource 9 [mem 0xfed45000-0xfedfffff window]
[ 2.102471] pci_bus 0000:00: resource 10 [mem 0xfee01000-0xffffffff window]
[ 2.102473] pci_bus 0000:01: resource 1 [mem 0xd0600000-0xd06fffff]
[ 2.102475] pci_bus 0000:02: resource 1 [mem 0xd0500000-0xd05fffff]
[ 2.102477] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 2.102478] pci_bus 0000:03: resource 1 [mem 0xd0400000-0xd04fffff]
[ 2.102480] pci_bus 0000:03: resource 2 [mem 0xbf300000-0xbf4fffff 64bit pref]
[ 2.102511] NET: Registered protocol family 2
[ 2.102664] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.102802] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 2.102986] TCP: Hash tables configured (established 65536 bind 65536)
[ 2.103010] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.103039] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 2.103100] NET: Registered protocol family 1
[ 2.103113] pci 0000:00:02.0: Video device with shadowed ROM
[ 2.103120] pci 0000:00:14.0: enabling device (0000 -> 0002)
[ 2.103344] pci 0000:00:1d.0: enabling device (0000 -> 0002)
[ 2.103518] PCI: CLS 64 bytes, default 64
[ 2.103565] Unpacking initramfs...
[ 2.170629] Freeing initrd memory: 3584K (ffff8800378f0000 - ffff880037c70000)
[ 2.170656] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.170658] software IO TLB [mem 0x9509a000-0x9909a000] (64MB) mapped at [ffff88009509a000-ffff880099099fff]
[ 2.170713] RAPL PMU detected, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 2.170715] hw unit of domain pp0-core 2^-14 Joules
[ 2.170716] hw unit of domain package 2^-14 Joules
[ 2.170717] hw unit of domain dram 2^-14 Joules
[ 2.170718] hw unit of domain pp1-gpu 2^-14 Joules
[ 2.170862] Scanning for low memory corruption every 60 seconds
[ 2.171167] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 2.171557] Initialise system trusted keyring
[ 2.171660] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 2.173141] zbud: loaded
[ 2.173334] VFS: Disk quotas dquot_6.6.0
[ 2.173367] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 2.173514] Key type big_key registered
[ 2.173719] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[ 2.173748] io scheduler noop registered
[ 2.173751] io scheduler deadline registered (default)
[ 2.173782] io scheduler cfq registered
[ 2.174354] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 2.174358] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 2.174375] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 2.174377] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 2.174380] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 2.174398] pcieport 0000:00:1c.5: Signaling PME through PCIe PME interrupt
[ 2.174400] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 2.174403] pcie_pme 0000:00:1c.5:pcie01: service driver pcie_pme loaded
[ 2.174408] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.174418] pciehp 0000:00:1c.5:pcie04: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[ 2.174442] pciehp 0000:00:1c.5:pcie04: service driver pciehp loaded
[ 2.174446] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.174461] efifb: probing for efifb
[ 2.174473] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90001000000, using 8128k, total 8128k
[ 2.174474] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 2.174475] efifb: scrolling: redraw
[ 2.174477] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.180321] Console: switching to colour frame buffer device 240x67
[ 2.184929] fb0: EFI VGA frame buffer device
[ 2.184938] intel_idle: MWAIT substates: 0x11142120
[ 2.184940] intel_idle: v0.4.1 model 0x45
[ 2.184941] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 2.185195] GHES: HEST is not enabled!
[ 2.185258] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.185524] serial 0000:00:16.3: enabling device (0000 -> 0003)
[ 2.205978] 0000:00:16.3: ttyS0 at I/O 0x30b0 (irq = 19, base_baud = 115200) is a 16550A
[ 2.206174] Linux agpgart interface v0.103
[ 2.206496] rtc_cmos 00:02: RTC can wake from S4
[ 2.206643] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 2.206671] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.206684] Intel P-state driver initializing.
[ 2.206860] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.209267] NET: Registered protocol family 10
[ 2.209670] NET: Registered protocol family 17
[ 2.209941] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x1c
[ 2.209950] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x1c
[ 2.209955] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x1c
[ 2.209963] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x1c
[ 2.210013] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.210212] registered taskstats version 1
[ 2.210225] Loading compiled-in X.509 certificates
[ 2.210245] zswap: loaded using pool lzo/zbud
[ 2.210631] Magic number: 8:843:935
[ 2.210711] rtc_cmos 00:02: setting system clock to 2016-07-09 12:55:15 UTC (1468068915)
[ 2.210775] PM: Hibernation image not present or could not be loaded.
[ 2.211621] Freeing unused kernel memory: 1200K (ffffffff818ef000 - ffffffff81a1b000)
[ 2.211622] Write protecting the kernel read-only data: 8192k
[ 2.211855] Freeing unused kernel memory: 428K (ffff880001595000 - ffff880001600000)
[ 2.212274] Freeing unused kernel memory: 224K (ffff8800017c8000 - ffff880001800000)
[ 2.217523] random: systemd-tmpfile urandom read with 6 bits of entropy available
[ 2.237285] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.238475] i8042: Detected active multiplexing controller, rev 1.1
[ 2.239131] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.239136] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 2.239139] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 2.239140] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 2.239142] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 2.241467] ACPI: bus type USB registered
[ 2.241483] usbcore: registered new interface driver usbfs
[ 2.241489] usbcore: registered new interface driver hub
[ 2.241505] usbcore: registered new device driver usb
[ 2.242114] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.242292] ehci-pci: EHCI PCI platform driver
[ 2.242441] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.242447] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 2.243170] SCSI subsystem initialized
[ 2.243512] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 2.243517] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 2.243711] hub 1-0:1.0: USB hub found
[ 2.243724] hub 1-0:1.0: 9 ports detected
[ 2.244527] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 2.244530] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 2.244547] libata version 3.00 loaded.
[ 2.244668] hub 2-0:1.0: USB hub found
[ 2.244678] hub 2-0:1.0: 4 ports detected
[ 2.244948] usb: port power management may be unreliable
[ 2.245220] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 2.245226] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 2.245235] ehci-pci 0000:00:1d.0: debug port 2
[ 2.249123] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 2.249138] ehci-pci 0000:00:1d.0: irq 17, io mem 0xd073d000
[ 2.249752] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[ 2.249835] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 46
[ 2.259746] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.259925] hub 3-0:1.0: USB hub found
[ 2.259936] hub 3-0:1.0: 3 ports detected
[ 2.260112] ahci 0000:00:1f.2: version 3.0
[ 2.279815] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x1 impl SATA mode
[ 2.279820] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 2.280140] scsi host0: ahci
[ 2.280241] scsi host1: ahci
[ 2.280294] ata1: SATA max UDMA/133 abar m2048@0xd073c000 port 0xd073c100 irq 47
[ 2.280296] ata2: DUMMY
[ 2.280652] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.559806] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 2.559827] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[ 2.579793] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 2.580794] hub 2-3:1.0: USB hub found
[ 2.580965] hub 2-3:1.0: 4 ports detected
[ 2.629801] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.630487] ata1.00: supports DRM functions and may not be fully accessible
[ 2.630618] ata1.00: READ LOG DMA EXT failed, trying unqueued
[ 2.630673] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.630675] ata1.00: ATA-9: SAMSUNG MZ7PD256HCGM-000H7, DXM06H6Q, max UDMA/133
[ 2.630677] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 2.631294] ata1.00: supports DRM functions and may not be fully accessible
[ 2.631424] ata1.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 2.631693] ata1.00: configured for UDMA/133
[ 2.632007] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7PD256 6H6Q PQ: 0 ANSI: 5
[ 2.633648] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[ 2.633728] sd 0:0:0:0: [sda] Write Protect is off
[ 2.633731] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.633751] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.635718] sda: sda1 sda2 sda3 sda4
[ 2.636247] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.710432] hub 1-3:1.0: USB hub found
[ 2.710454] hub 1-3:1.0: 4 ports detected
[ 2.730615] hub 3-1:1.0: USB hub found
[ 2.730911] hub 3-1:1.0: 8 ports detected
[ 2.829811] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[ 2.916466] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 2.959775] usb 1-5: device descriptor read/64, error -71
[ 3.004412] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.169778] tsc: Refined TSC clocksource calibration: 2693.760 MHz
[ 3.169782] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d437ab68b, max_idle_ns: 440795285230 ns
[ 3.196736] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.196857] systemd[1]: Detected architecture x86-64.
[ 3.198485] systemd[1]: Set hostname to <basil>.
[ 3.199764] usb 1-5: device descriptor read/64, error -71
[ 3.296825] systemd[1]: Listening on udev Control Socket.
[ 3.296861] systemd[1]: Reached target Remote File Systems.
[ 3.297357] systemd[1]: Listening on Process Core Dump Socket.
[ 3.297610] systemd[1]: Created slice User and Session Slice.
[ 3.297644] systemd[1]: Listening on Journal Socket.
[ 3.297671] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.303989] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.304033] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.304063] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.304074] systemd[1]: Reached target Swap.
[ 3.304175] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.304202] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.304289] systemd[1]: Created slice System Slice.
[ 3.359939] systemd[1]: Starting Set Up Additional Binary Formats...
[ 3.360066] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.360513] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.360884] systemd[1]: Mounting Debug File System...
[ 3.361278] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.361528] systemd[1]: Mounting Huge Pages File System...
[ 3.365244] systemd[1]: Starting Load Kernel Modules...
[ 3.365645] systemd[1]: Starting Setup Virtual Console...
[ 3.366135] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.366543] systemd[1]: Starting Journal Service...
[ 3.370091] systemd[1]: Mounting Temporary Directory...
[ 3.370110] systemd[1]: Reached target Slices.
[ 3.370223] systemd[1]: Created slice system-getty.slice.
[ 3.370267] systemd[1]: Listening on udev Kernel Socket.
[ 3.370303] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.370315] systemd[1]: Reached target Encrypted Volumes.
[ 3.371199] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.371343] systemd[1]: Started Load Kernel Modules.
[ 3.371567] systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 138 (systemd-binfmt)
[ 3.371825] systemd[1]: Mounting Arbitrary Executable File Formats File System...
[ 3.372217] systemd[1]: Mounting Configuration File System...
[ 3.373057] systemd[1]: Starting Apply Kernel Variables...
[ 3.373776] systemd[1]: Started Setup Virtual Console.
[ 3.374151] systemd[1]: Mounted Huge Pages File System.
[ 3.374773] systemd[1]: Mounted Temporary Directory.
[ 3.375082] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 3.375387] systemd[1]: Started Remount Root and Kernel File Systems.
[ 3.377155] systemd[1]: Starting udev Coldplug all Devices...
[ 3.377696] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.378109] systemd[1]: Starting Load/Save Random Seed...
[ 3.378924] systemd[1]: Mounted Arbitrary Executable File Formats File System.
[ 3.378955] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.378969] systemd[1]: Mounted Debug File System.
[ 3.378991] systemd[1]: Mounted Configuration File System.
[ 3.379749] systemd[1]: Started Set Up Additional Binary Formats.
[ 3.382980] systemd[1]: Started Apply Kernel Variables.
[ 3.387507] systemd[1]: Started Load/Save Random Seed.
[ 3.389759] usb 1-3.2: new full-speed USB device number 4 using xhci_hcd
[ 3.401270] systemd[1]: Started udev Coldplug all Devices.
[ 3.619801] usb 1-5: new full-speed USB device number 5 using xhci_hcd
[ 3.739820] usb 1-5: device descriptor read/64, error -71
[ 3.969875] usb 1-5: device descriptor read/64, error -71
[ 4.089620] systemd[1]: Started Create Static Device Nodes in /dev.
[ 4.139970] systemd[1]: Starting udev Kernel Device Manager...
[ 4.140000] systemd[1]: Reached target Local File Systems (Pre).
[ 4.169798] clocksource: Switched to clocksource tsc
[ 4.176116] systemd[1]: Started Journal Service.
[ 4.184885] systemd-journald[157]: Received request to flush runtime journal from PID 1
[ 4.199753] usb 1-5: new full-speed USB device number 6 using xhci_hcd
[ 4.199857] usb 1-5: Device not responding to setup address.
[ 4.257069] FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
[ 4.260934] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 4.262436] pps_core: LinuxPPS API ver. 1 registered
[ 4.262438] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 4.263098] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 4.263103] ACPI: Sleep Button [SLPB]
[ 4.263175] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 4.263217] ACPI: Lid Switch [LID]
[ 4.263280] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 4.263282] ACPI: Power Button [PWRF]
[ 4.264594] PTP clock support registered
[ 4.265018] ACPI: AC Adapter [AC] (on-line)
[ 4.272498] Initializing HPQ6001 module
[ 4.272559] input: HP Wireless hotkeys as /devices/virtual/input/input8
[ 4.274140] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[ 4.274143] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[ 4.277438] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 4.280818] hp_accel: hardware type HPB64xx found
[ 4.287841] [drm] Initialized drm 1.1.0 20060810
[ 4.359842] tpm_tis 00:06: 1.2 TPM (device-id 0xB, rev-id 16)
[ 4.409880] usb 1-5: Device not responding to setup address.
[ 4.413438] lis3lv02d: 8 bits 3DC sensor found
[ 4.561492] ACPI: Battery Slot [BAT0] (battery present)
[ 4.561608] ACPI: Battery Slot [BAT1] (battery absent)
[ 4.567971] e1000e 0000:00:19.0 eth0: registered PHC clock
[ 4.567973] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 38:63:bb:b8:d3:7f
[ 4.567974] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 4.568006] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
[ 4.568029] snd_hda_intel 0000:00:03.0: enabling device (0000 -> 0002)
[ 4.568151] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[ 4.568811] [drm] Memory usable by graphics device = 2048M
[ 4.568814] checking generic (c0000000 7f0000) vs hw (c0000000 10000000)
[ 4.568815] fb: switching to inteldrmfb from EFI VGA
[ 4.568832] Console: switching to colour dummy device 80x25
[ 4.568961] [drm] Replacing VGA console driver
[ 4.572075] wmi: Mapper loaded
[ 4.574668] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 4.574671] [drm] Driver supports precise vblank timestamp query.
[ 4.574948] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 4.581964] snd_hda_codec_idt hdaudioC1D0: autoconfig for 92HD91BXX: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[ 4.581967] snd_hda_codec_idt hdaudioC1D0: speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[ 4.581969] snd_hda_codec_idt hdaudioC1D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 4.581970] snd_hda_codec_idt hdaudioC1D0: mono: mono_out=0x0
[ 4.581971] snd_hda_codec_idt hdaudioC1D0: inputs:
[ 4.581972] snd_hda_codec_idt hdaudioC1D0: Mic=0xc
[ 4.581973] snd_hda_codec_idt hdaudioC1D0: Internal Mic=0x11
[ 4.581974] snd_hda_codec_idt hdaudioC1D0: Line=0xf
[ 4.619767] usb 1-5: device not accepting address 6, error -71
[ 4.651351] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 4.651863] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 4.651886] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 4.651906] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 4.651927] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input13
[ 4.739806] usb 1-5: new full-speed USB device number 7 using xhci_hcd
[ 4.739954] usb 1-5: Device not responding to setup address.
[ 4.809785] tpm_tis 00:06: TPM is disabled/deactivated (0x7)
[ 4.844299] Intel(R) Wireless WiFi driver for Linux
[ 4.844302] Copyright(c) 2003- 2015 Intel Corporation
[ 4.844345] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[ 4.848980] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7260-17.ucode failed with error -2
[ 4.853895] iwlwifi 0000:02:00.0: loaded firmware version 16.242414.0 op_mode iwlmvm
[ 4.919845] fbcon: inteldrmfb (fb0) is primary device
[ 4.930068] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 4.930116] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4.930333] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 4.945879] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 4.949846] usb 1-5: Device not responding to setup address.
[ 4.961321] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 4.964583] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 4.972173] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 5.035862] AVX2 version of gcm_enc/dec engaged.
[ 5.035863] AES CTR mode by8 optimization enabled
[ 5.126387] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.126389] ACPI: Thermal Zone [CPUZ] (46 C)
[ 5.149581] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 5.159757] usb 1-5: device not accepting address 7, error -71
[ 5.159781] usb usb1-port5: unable to enumerate USB device
[ 5.279762] usb 1-7: new high-speed USB device number 8 using xhci_hcd
[ 5.324687] intel_rapl: Found RAPL domain package
[ 5.324690] intel_rapl: Found RAPL domain core
[ 5.324693] intel_rapl: Found RAPL domain uncore
[ 5.324696] intel_rapl: Found RAPL domain dram
[ 5.416098] random: nonblocking pool is initialized
[ 5.687492] thermal LNXTHERM:01: registered as thermal_zone2
[ 5.687493] ACPI: Thermal Zone [GFXZ] (0 C)
[ 5.700496] input: PS/2 Generic Mouse as /devices/platform/i8042/serio2/input/input15
[ 5.750122] Bluetooth: Core ver 2.21
[ 5.750131] NET: Registered protocol family 31
[ 5.750132] Bluetooth: HCI device and connection manager initialized
[ 5.750134] Bluetooth: HCI socket layer initialized
[ 5.750135] Bluetooth: L2CAP socket layer initialized
[ 5.750138] Bluetooth: SCO socket layer initialized
[ 5.759619] usbcore: registered new interface driver btusb
[ 5.772829] Bluetooth: hci0: read Intel version: 370710018002030d00
[ 5.774133] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 5.806682] ppdev: user-space parallel port driver
[ 5.815720] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 5.849624] thermal LNXTHERM:02: registered as thermal_zone3
[ 5.849625] ACPI: Thermal Zone [EXTZ] (0 C)
[ 5.862086] input: HP WMI hotkeys as /devices/virtual/input/input18
[ 5.866782] thermal LNXTHERM:03: registered as thermal_zone4
[ 5.866783] ACPI: Thermal Zone [LOCZ] (42 C)
[ 5.869808] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input19
[ 5.870852] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 5.871049] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input20
[ 5.904935] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 6.106669] iwlwifi 0000:02:00.0 wlo1: renamed from wlan0
[ 6.124791] mousedev: PS/2 mouse device common for all mice
[ 6.128926] media: Linux media interface: v0.10
[ 6.134768] Linux video capture interface: v2.00
[ 6.144381] uvcvideo: Found UVC 1.00 device HP HD Webcam (05c8:0369)
[ 6.152879] input: HP HD Webcam as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input21
[ 6.152940] usbcore: registered new interface driver uvcvideo
[ 6.152940] USB Video Class driver (1.1.1)
[ 6.158386] thermal LNXTHERM:04: registered as thermal_zone5
[ 6.158387] ACPI: Thermal Zone [BATZ] (42 C)
[ 6.158684] thermal LNXTHERM:05: registered as thermal_zone6
[ 6.158684] ACPI: Thermal Zone [PCHZ] (0 C)
[ 6.361299] Console: switching to colour frame buffer device 240x67
[ 6.489714] psmouse serio3: synaptics: queried max coordinates: x [..5668], y [..4762]
[ 6.523193] psmouse serio3: synaptics: queried min coordinates: x [1360..], y [1160..]
[ 6.581657] psmouse serio3: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x26800/0x0, board id: 2768, fw id: 1658220
[ 6.619819] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio3/input/input17
[ 6.680006] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 6.680010] [drm] Initialized i915 1.6.0 20151010 for 0000:00:02.0 on minor 0
[ 6.680280] i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
[ 6.680404] ACPI Warning: SystemIO range 0x000000000000EF80-0x000000000000EF9F conflicts with OpRegion 0x000000000000EF80-0x000000000000EF8F (\_SB_.PCI0.SBUS.SMBI) (20150930/utaddress-254)
[ 6.680405] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 6.682875] iTCO_vendor_support: vendor-support=0
[ 6.683388] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 6.683410] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 6.683464] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 6.684509] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 6.705511] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input22
[ 6.705581] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input23
[ 6.705642] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input24
[ 8.408917] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.619980] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.624082] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 8.624432] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 8.624934] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 8.837410] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 8.838012] iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
[ 8.859428] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 8.868909] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.874933] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 8.983309] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[ 12.329113] wlo1: authenticate with 14:49:e0:de:b5:08
[ 12.336381] wlo1: send auth to 14:49:e0:de:b5:08 (try 1/3)
[ 12.338338] wlo1: authenticated
[ 12.339809] wlo1: associate with 14:49:e0:de:b5:08 (try 1/3)
[ 12.343740] wlo1: RX AssocResp from 14:49:e0:de:b5:08 (capab=0x411 status=0 aid=4)
[ 12.345496] wlo1: associated
[ 12.345528] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[ 54.082642] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 54.099138] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 99.053136] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[ 99.073247] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not readyiwconfig:
lo no wireless extensions.
enp0s25 no wireless extensions.
wlo1 IEEE 802.11abgn ESSID:"turboturbo"
Mode:Managed Frequency:2.462 GHz Access Point: 14:49:E0:DE:B5:08
Bit Rate=11 Mb/s Tx-Power=22 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=70/70 Signal level=-34 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:8 Missed beacon:0ifconfig (no cable connected):
enp0s25: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether 38:63:bb:b8:d3:7f txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 20 memory 0xd0700000-d0720000
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1 (Local Loopback)
RX packets 1207 bytes 44461 (43.4 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1207 bytes 44461 (43.4 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlo1: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.192.22 netmask 255.255.255.0 broadcast 192.168.192.255
inet6 fe80::8219:34ff:fe92:e14 prefixlen 64 scopeid 0x20<link>
ether 80:19:34:92:0e:14 txqueuelen 1000 (Ethernet)
RX packets 154 bytes 10305 (10.0 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1450 bytes 149858 (146.3 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0Any help is appreciated.
Last edited by TheGasolineWillBeOurs (2016-07-18 11:57:06)
Offline
#2 2016-07-09 13:55:04
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 19,782
Re: [SOLVED] Wireless highly unreliable
Please post the output of find /etc/systemd
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Online
#3 2016-07-09 14:18:43
- TheGasolineWillBeOurs
- Member
- Registered: 2015-02-06
- Posts: 65
Re: [SOLVED] Wireless highly unreliable
Here's the output from find /etc/systemd
/etc/systemd
/etc/systemd/system.conf
/etc/systemd/journald.conf
/etc/systemd/network
/etc/systemd/journal-remote.conf
/etc/systemd/user
/etc/systemd/user/sockets.target.wants
/etc/systemd/user/sockets.target.wants/pulseaudio.socket
/etc/systemd/logind.conf
/etc/systemd/timesyncd.conf
/etc/systemd/system
/etc/systemd/system/getty.target.wants
/etc/systemd/system/getty.target.wants/getty@tty1.service
/etc/systemd/system/dbus-org.freedesktop.nm-dispatcher.service
/etc/systemd/system/multi-user.target.wants
/etc/systemd/system/multi-user.target.wants/remote-fs.target
/etc/systemd/system/multi-user.target.wants/org.cups.cupsd.path
/etc/systemd/system/multi-user.target.wants/acpid.service
/etc/systemd/system/multi-user.target.wants/NetworkManager.service
/etc/systemd/system/printer.target.wants
/etc/systemd/system/printer.target.wants/org.cups.cupsd.service
/etc/systemd/system/dbus-org.freedesktop.NetworkManager.service
/etc/systemd/system/sockets.target.wants
/etc/systemd/system/sockets.target.wants/org.cups.cupsd.socket
/etc/systemd/coredump.conf
/etc/systemd/user.conf
/etc/systemd/journal-upload.conf
/etc/systemd/resolved.confOffline
#4 2016-07-09 16:25:06
- Head_on_a_Stick
- Member
- From: London
- Registered: 2014-02-20
- Posts: 7,732
- Website
Re: [SOLVED] Wireless highly unreliable
What is your hardware? Have you checked https://wiki.archlinux.org/index.php/Wi … d_firmware?
Check the output of `iwconfig` and if power management is on then try disabling it with:
# iw dev wlo1 set power_save offOffline
#5 2016-07-10 03:24:13
- ewaller
- Administrator
- From: Pasadena, CA
- Registered: 2009-07-13
- Posts: 19,782
Re: [SOLVED] Wireless highly unreliable
Been away all day -- sorry. That find output looks rational. So much for the easy solution 
Nothing is too wonderful to be true, if it be consistent with the laws of nature -- Michael Faraday
Sometimes it is the people no one can imagine anything of who do the things no one can imagine. -- Alan Turing
---
How to Ask Questions the Smart Way
Online
#6 2016-07-12 08:02:30
- TheGasolineWillBeOurs
- Member
- Registered: 2015-02-06
- Posts: 65
Re: [SOLVED] Wireless highly unreliable
Hey all, thanks for the help!
That's my network card:
$ lspci -k | grep -A 3 'Network'
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev 73)
Subsystem: Intel Corporation Dual Band Wireless-N 7260
Kernel driver in use: iwlwifi
Kernel modules: iwlwifiFunny thing is, I'm on a network right now that runs super fast and smooth. Other networks give me a lot of trouble, i.e. don't work at all. It's a little bit difficult to debug like that. nmcli shows that I'm on channel 44 right now, so maybe it has something to do with that. I try to figure out if maybe the Wifi that work badly for me have interference?
Check the output of `iwconfig` and if power management is on then try disabling it with:
# iw dev wlo1 set power_save off
This hasn't improved my Wifi problems, as far as I can tell. But thanks for the suggestion.
Offline
#7 2016-07-12 19:32:35
- Head_on_a_Stick
- Member
- From: London
- Registered: 2014-02-20
- Posts: 7,732
- Website
Re: [SOLVED] Wireless highly unreliable
So have you tried the iwlwifi suggestions on the ArchWiki wireless page?
https://wiki.archlinux.org/index.php/Wi … on#iwlwifi
Some more suggestions here from forums.debian.net (the module parameters are distribution-agnostic):
http://forums.debian.net/viewtopic.php?f=16&t=121696
fdn seems to be down at the moment but I'm sure somebody will come and give the server a kick shortly -- it can be like the Marie Mary Celeste over there sometimes...
Last edited by Head_on_a_Stick (2016-07-12 19:33:44)
Offline
#8 2016-07-12 20:18:54
- R00KIE
- Forum Fellow
- From: Between a computer and a chair
- Registered: 2008-09-14
- Posts: 4,734
Re: [SOLVED] Wireless highly unreliable
Crazy idea, have you tried moving further away from the access point? At least until you see the "Link Quality" value drop a little bit.
R00KIE
Tm90aGluZyB0byBzZWUgaGVyZSwgbW92ZSBhbG9uZy4K
Offline
#9 2016-07-18 11:56:47
- TheGasolineWillBeOurs
- Member
- Registered: 2015-02-06
- Posts: 65
Re: [SOLVED] Wireless highly unreliable
I tried your suggestions, but nothing really worked. However, I changed the channel number and it seems to be better. Basically I was following these instructions here:
http://www.howtogeek.com/197268/how-to- … ng-system/
I'm not sure how much better it is, since it can come and go.
I mark this as solved for now. Thanks for all the help!
Offline