You are not logged in.
- Topics: Active | Unanswered
Pages: 1
#1 2016-10-12 15:31:15
- andreigrig
- Member
- Registered: 2016-02-04
- Posts: 20
AMD IOMMU Dilemma
Hi all,
can anyone help me with the following dilemma? This text is extracted from the kernel parameters documentation list.
amd_iommu= [HW,X86-64]
Pass parameters to the AMD IOMMU driver in the system.
Possible values are:
fullflush - enable flushing of IO/TLB entries when
they are unmapped. Otherwise they are
flushed before they will be reused, which
is a lot of faster
off - do not initialize any AMD IOMMU found in
the system
force_isolation - Force device isolation for all
devices. The IOMMU driver is not
allowed anymore to lift isolation
requirements as needed. This option
does not override iommu=pt
So amd_iommu has only these possible values. Yet how is it that every VGA passthrough / IOMMU enable guide are suggesting to use the amd_iommu=on option. From what I can see that is only valid for intel_iommu=on.
I guess for AMD platform the only thing that helps from the performance point of view is iommu=pt ?
Thanks,
Andrei
Offline
#2 2016-10-12 22:27:38
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 12,939
Re: AMD IOMMU Dilemma
AFAIK if IOMMU / AMD-Vi is correctly enabled in the bios ( Mobo and processor ofcourse need to support it) you don't need any kernel parameter .
(Since IOMMU v1 was introduced, almost all AMD procs usedit in 64bit mode, so AMD IOMMU is a lot more mature then intel iommu )
please post lscpu and full dmesg .
Last edited by Lone_Wolf (2016-10-12 22:29:17)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#3 2016-10-13 17:44:41
- andreigrig
- Member
- Registered: 2016-02-04
- Posts: 20
Re: AMD IOMMU Dilemma
Hi,
thanks for your answer and sorry for the delay.
lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: AuthenticAMD
CPU family: 21
Model: 2
Model name: AMD FX(tm)-8320 Eight-Core Processor
Stepping: 0
CPU MHz: 1400.000
CPU max MHz: 4400,0000
CPU min MHz: 1400,0000
BogoMIPS: 8844.73
Virtualization: AMD-V
L1d cache: 16K
L1i cache: 64K
L2 cache: 2048K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb hw_pstate vmmcall bmi1 arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthresholddmesg
[ 0.000000] Linux version 4.7.6-1-ARCH (builduser@tobias) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Fri Sep 30 19:28:42 CEST 2016
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=0d54b2d3-4274-47e2-93d5-f0ffaadd758f rw amd_iommu=on iommu=pt quiet
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009dd95fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009dd96000-0x000000009ddc5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ddc6000-0x000000009ddd5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009ddd6000-0x000000009e1c4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e1c5000-0x000000009edc1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009edc2000-0x000000009edc2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009edc3000-0x000000009efc8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009efc9000-0x000000009f44afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f44b000-0x000000009f7dbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f7dc000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000045effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS FDk 10/07/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000045f000000 aka 17904M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd880-0x000fd88f] mapped at [ffff8800000fd880]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01b58000, 0x01b58fff] PGTABLE
[ 0.000000] BRK [0x01b59000, 0x01b59fff] PGTABLE
[ 0.000000] BRK [0x01b5a000, 0x01b5afff] PGTABLE
[ 0.000000] BRK [0x01b5b000, 0x01b5bfff] PGTABLE
[ 0.000000] BRK [0x01b5c000, 0x01b5cfff] PGTABLE
[ 0.000000] BRK [0x01b5d000, 0x01b5dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x374e5000-0x37a69fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009DDCF070 000064 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009DDD4AF0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x000000009DDCF168 005985 (v02 ALASKA A M I 00000088 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009E1BFF80 000040
[ 0.000000] ACPI: APIC 0x000000009DDD4BE8 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009DDD4C88 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009DDD4CD0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: HPET 0x000000009DDD4D10 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
[ 0.000000] ACPI: SSDT 0x000000009DDD4D48 000D3C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: MATS 0x000000009DDD5A88 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
[ 0.000000] ACPI: IVRS 0x000000009DDD5AC0 0000D0 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x45eff6000-0x45eff9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000045effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009dd95fff]
[ 0.000000] node 0: [mem 0x000000009edc2000-0x000000009edc2fff]
[ 0.000000] node 0: [mem 0x000000009efc9000-0x000000009f44afff]
[ 0.000000] node 0: [mem 0x000000009f7dc000-0x000000009f7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000045effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000045effffff]
[ 0.000000] On node 0 totalpages: 4182489
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10057 pages used for memmap
[ 0.000000] DMA32 zone: 643645 pages, LIFO batch:31
[ 0.000000] Normal zone: 55232 pages used for memmap
[ 0.000000] Normal zone: 3534847 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x43538210 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9dd96000-0x9ddc5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ddc6000-0x9ddd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ddd6000-0x9e1c4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e1c5000-0x9edc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9edc3000-0x9efc8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f44b000-0x9f7dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0x9f800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu @ffff88045ec00000 s97944 r8192 d29032 u262144
[ 0.000000] pcpu-alloc: s97944 r8192 d29032 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4117115
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=0d54b2d3-4274-47e2-93d5-f0ffaadd758f rw amd_iommu=on iommu=pt quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 16383036K/16729956K available (6000K kernel code, 979K rwdata, 1888K rodata, 1244K init, 1164K bss, 346920K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1032 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4420.673 MHz processor
[ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 8844.73 BogoMIPS (lpj=14735576)
[ 0.000018] pid_max: default: 32768 minimum: 301
[ 0.000023] ACPI: Core revision 20160422
[ 0.002250] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002269] Security Framework initialized
[ 0.002270] Yama: becoming mindful.
[ 0.003067] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006392] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.007866] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.007880] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008133] CPU: Physical Processor ID: 0
[ 0.008134] CPU: Processor Core ID: 0
[ 0.008136] mce: CPU supports 7 MCE banks
[ 0.008141] LVT offset 1 assigned for vector 0xf9
[ 0.008146] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.008147] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.008354] Freeing SMP alternatives memory: 24K (ffffffff81a2d000 - ffffffff81a33000)
[ 0.009074] ftrace: allocating 23850 entries in 94 pages
[ 0.015122] smpboot: Max logical packages: 2
[ 0.015123] smpboot: APIC(10) Converting physical 1 to logical package 0
[ 0.087536] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.224082] smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.224085] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.224088] ... version: 0
[ 0.224089] ... bit width: 48
[ 0.224089] ... generic registers: 6
[ 0.224090] ... value mask: 0000ffffffffffff
[ 0.224091] ... max period: 00007fffffffffff
[ 0.224091] ... fixed-purpose events: 0
[ 0.224092] ... event mask: 000000000000003f
[ 0.247479] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.264108] x86: Booting SMP configuration:
[ 0.264110] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.929367] x86: Booted up 1 node, 8 CPUs
[ 0.929371] smpboot: Total of 8 processors activated (70749.41 BogoMIPS)
[ 0.938923] devtmpfs: initialized
[ 0.938980] x86/mm: Memory block size: 128MB
[ 0.942502] PM: Registering ACPI NVS region [mem 0x9ddd6000-0x9e1c4fff] (4124672 bytes)
[ 0.942546] PM: Registering ACPI NVS region [mem 0x9edc3000-0x9efc8fff] (2121728 bytes)
[ 0.942627] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.942671] pinctrl core: initialized pinctrl subsystem
[ 0.942702] RTC time: 17:32:48, date: 10/13/16
[ 0.942782] NET: Registered protocol family 16
[ 0.953992] cpuidle: using governor ladder
[ 0.963998] cpuidle: using governor menu
[ 0.964049] ACPI: bus type PCI registered
[ 0.964051] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.964099] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.964101] PCI: not using MMCONFIG
[ 0.964102] PCI: Using configuration type 1 for base access
[ 0.964103] PCI: Using configuration type 1 for extended access
[ 0.964484] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.964485] mtrr: probably your BIOS does not setup all CPUs.
[ 0.964486] mtrr: corrected configuration.
[ 0.977460] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.977461] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.977728] ACPI: Added _OSI(Module Device)
[ 0.977730] ACPI: Added _OSI(Processor Device)
[ 0.977731] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.977732] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.977998] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.980292] ACPI: Interpreter enabled
[ 0.980305] ACPI: (supports S0 S3 S4 S5)
[ 0.980306] ACPI: Using IOAPIC for interrupt routing
[ 0.980407] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.980433] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.980441] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.984404] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.984409] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.984412] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.984635] PCI host bridge to bus 0000:00
[ 0.984637] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.984639] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.984640] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.984641] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.984643] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.984644] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.984645] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xffffffff window]
[ 0.984646] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.984654] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.984741] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.984823] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.984850] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.984885] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.984916] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.984942] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.984976] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.985009] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.985035] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.985070] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.985108] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.985120] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.985127] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.985134] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.985140] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.985147] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.985154] pci 0000:00:11.0: reg 0x24: [mem 0xf5107000-0xf51073ff]
[ 0.985237] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.985247] pci 0000:00:12.0: reg 0x10: [mem 0xf5106000-0xf5106fff]
[ 0.985317] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.985351] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.985362] pci 0000:00:12.2: reg 0x10: [mem 0xf5105000-0xf51050ff]
[ 0.985418] pci 0000:00:12.2: supports D1 D2
[ 0.985419] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.985453] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.985487] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.985496] pci 0000:00:13.0: reg 0x10: [mem 0xf5104000-0xf5104fff]
[ 0.985566] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.985599] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.985611] pci 0000:00:13.2: reg 0x10: [mem 0xf5103000-0xf51030ff]
[ 0.985694] pci 0000:00:13.2: supports D1 D2
[ 0.985695] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.985728] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.985762] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.985862] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.985963] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.986033] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.986065] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.986074] pci 0000:00:14.5: reg 0x10: [mem 0xf5102000-0xf5102fff]
[ 0.986145] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.986179] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.986227] pci 0000:00:15.0: supports D1 D2
[ 0.986263] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.986295] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.986343] pci 0000:00:15.1: supports D1 D2
[ 0.986378] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.986414] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.986424] pci 0000:00:16.0: reg 0x10: [mem 0xf5101000-0xf5101fff]
[ 0.986495] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.986528] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.986540] pci 0000:00:16.2: reg 0x10: [mem 0xf5100000-0xf51000ff]
[ 0.986596] pci 0000:00:16.2: supports D1 D2
[ 0.986597] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.986630] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.986663] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.986721] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.986777] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.986833] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.986892] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.986947] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.987037] pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000
[ 0.987044] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.987051] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.987057] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.987061] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.987065] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.987139] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
[ 0.987147] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 0.992704] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 0.992707] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 0.992709] pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.992711] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.992746] pci 0000:02:00.0: [10de:0a65] type 00 class 0x030000
[ 0.992755] pci 0000:02:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
[ 0.992764] pci 0000:02:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.992772] pci 0000:02:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 0.992777] pci 0000:02:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 0.992783] pci 0000:02:00.0: reg 0x30: [mem 0xf5000000-0xf507ffff pref]
[ 0.992859] pci 0000:02:00.1: [10de:0be3] type 00 class 0x040300
[ 0.992868] pci 0000:02:00.1: reg 0x10: [mem 0xf5080000-0xf5083fff]
[ 0.999356] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 0.999359] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 0.999361] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 0.999364] pci 0000:00:04.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 0.999401] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 0.999416] pci 0000:03:00.0: reg 0x10: [mem 0xf7300000-0xf7307fff 64bit]
[ 0.999482] pci 0000:03:00.0: supports D1 D2
[ 0.999483] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.006033] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 1.006037] pci 0000:00:09.0: bridge window [mem 0xf7300000-0xf73fffff]
[ 1.006077] pci 0000:04:06.0: [13f6:8788] type 00 class 0x040100
[ 1.006092] pci 0000:04:06.0: reg 0x10: [io 0xc000-0xc0ff]
[ 1.006169] pci 0000:04:06.0: supports D1 D2
[ 1.006224] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 1.006227] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 1.006232] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 1.006233] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 1.006234] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 1.006235] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 1.006237] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 1.006238] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 1.006239] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xffffffff window] (subtractive decode)
[ 1.006292] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.006336] pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 1.006359] pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
[ 1.006375] pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[ 1.006454] pci 0000:05:00.0: supports D1 D2
[ 1.006455] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.006492] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 1.012702] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 1.012706] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 1.012712] pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 1.012761] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 1.012781] pci 0000:06:00.0: reg 0x10: [mem 0xf7200000-0xf7207fff 64bit]
[ 1.012874] pci 0000:06:00.0: supports D1 D2
[ 1.012875] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.019354] pci 0000:00:15.1: PCI bridge to [bus 06]
[ 1.019359] pci 0000:00:15.1: bridge window [mem 0xf7200000-0xf72fffff]
[ 1.019678] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 1.019744] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 1.019794] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 1.019841] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 1.019879] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 1.019908] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 1.019937] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 1.019966] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 1.020136] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.020139] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 1.020140] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.020141] vgaarb: loaded
[ 1.020142] vgaarb: bridge control possible 0000:02:00.0
[ 1.020143] vgaarb: bridge control possible 0000:01:00.0
[ 1.020213] PCI: Using ACPI for IRQ routing
[ 1.026260] PCI: pci_cache_line_size set to 64 bytes
[ 1.026309] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 1.026310] e820: reserve RAM buffer [mem 0x9dd96000-0x9fffffff]
[ 1.026312] e820: reserve RAM buffer [mem 0x9edc3000-0x9fffffff]
[ 1.026313] e820: reserve RAM buffer [mem 0x9f44b000-0x9fffffff]
[ 1.026314] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[ 1.026315] e820: reserve RAM buffer [mem 0x45f000000-0x45fffffff]
[ 1.026388] NetLabel: Initializing
[ 1.026389] NetLabel: domain hash size = 128
[ 1.026390] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.026398] NetLabel: unlabeled traffic allowed by default
[ 1.026445] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.026447] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[ 1.029490] clocksource: Switched to clocksource hpet
[ 1.034501] VFS: Disk quotas dquot_6.6.0
[ 1.034512] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.034564] pnp: PnP ACPI init
[ 1.034642] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.034645] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.034830] system 00:01: [io 0x040b] has been reserved
[ 1.034832] system 00:01: [io 0x04d6] has been reserved
[ 1.034834] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 1.034835] system 00:01: [io 0x0c14] has been reserved
[ 1.034836] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 1.034837] system 00:01: [io 0x0c52] has been reserved
[ 1.034839] system 00:01: [io 0x0c6c] has been reserved
[ 1.034840] system 00:01: [io 0x0c6f] has been reserved
[ 1.034841] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 1.034842] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 1.034844] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 1.034845] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 1.034846] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 1.034847] system 00:01: [io 0x0800-0x089f] has been reserved
[ 1.034849] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 1.034850] system 00:01: [io 0x0900-0x090f] has been reserved
[ 1.034851] system 00:01: [io 0x0910-0x091f] has been reserved
[ 1.034853] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 1.034854] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.034856] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.034857] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 1.034859] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 1.034860] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 1.034862] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 1.034863] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 1.034865] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.034976] system 00:02: [io 0x0220-0x0227] has been reserved
[ 1.034977] system 00:02: [io 0x0228-0x0237] has been reserved
[ 1.034979] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 1.034981] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.035159] pnp 00:03: [dma 0 disabled]
[ 1.035190] pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.035210] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.035254] system 00:05: [io 0x04d0-0x04d1] has been reserved
[ 1.035256] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.035290] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.035381] system 00:07: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 1.035383] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.035464] system 00:08: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 1.035466] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.035560] pnp: PnP ACPI: found 9 devices
[ 1.041877] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.041901] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.041903] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.041906] pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.041908] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.041910] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.041912] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 1.041914] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 1.041916] pci 0000:00:04.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.041918] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 1.041920] pci 0000:00:09.0: bridge window [mem 0xf7300000-0xf73fffff]
[ 1.041924] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 1.041926] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 1.041933] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 1.041935] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 1.041939] pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 1.041943] pci 0000:00:15.1: PCI bridge to [bus 06]
[ 1.041946] pci 0000:00:15.1: bridge window [mem 0xf7200000-0xf72fffff]
[ 1.041951] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 1.041952] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 1.041954] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 1.041955] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.041956] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.041957] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.041959] pci_bus 0000:00: resource 10 [mem 0xa0000000-0xffffffff window]
[ 1.041960] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.041961] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.041962] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.041963] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.041964] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf50fffff]
[ 1.041965] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.041967] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[ 1.041968] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 1.041969] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
[ 1.041970] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
[ 1.041971] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
[ 1.041972] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
[ 1.041973] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.041974] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.041976] pci_bus 0000:04: resource 10 [mem 0xa0000000-0xffffffff window]
[ 1.041977] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 1.041978] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[ 1.041979] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[ 1.041995] NET: Registered protocol family 2
[ 1.042149] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.042367] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.042534] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.042567] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.042619] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.042697] NET: Registered protocol family 1
[ 1.996161] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.996344] PCI: CLS 64 bytes, default 64
[ 1.996377] Unpacking initramfs...
[ 2.058987] Freeing initrd memory: 5652K (ffff8800374e5000 - ffff880037a6a000)
[ 2.059570] iommu: Adding device 0000:00:00.0 to group 0
[ 2.059579] iommu: Using direct mapping for device 0000:00:00.0
[ 2.059847] iommu: Adding device 0000:00:02.0 to group 1
[ 2.059854] iommu: Using direct mapping for device 0000:00:02.0
[ 2.060119] iommu: Adding device 0000:00:04.0 to group 2
[ 2.060125] iommu: Using direct mapping for device 0000:00:04.0
[ 2.060392] iommu: Adding device 0000:00:09.0 to group 3
[ 2.060398] iommu: Using direct mapping for device 0000:00:09.0
[ 2.060663] iommu: Adding device 0000:00:11.0 to group 4
[ 2.060669] iommu: Using direct mapping for device 0000:00:11.0
[ 2.060942] iommu: Adding device 0000:00:12.0 to group 5
[ 2.060948] iommu: Using direct mapping for device 0000:00:12.0
[ 2.060960] iommu: Adding device 0000:00:12.2 to group 5
[ 2.061233] iommu: Adding device 0000:00:13.0 to group 6
[ 2.061239] iommu: Using direct mapping for device 0000:00:13.0
[ 2.061251] iommu: Adding device 0000:00:13.2 to group 6
[ 2.061517] iommu: Adding device 0000:00:14.0 to group 7
[ 2.061523] iommu: Using direct mapping for device 0000:00:14.0
[ 2.061788] iommu: Adding device 0000:00:14.3 to group 8
[ 2.061794] iommu: Using direct mapping for device 0000:00:14.3
[ 2.062059] iommu: Adding device 0000:00:14.4 to group 9
[ 2.062065] iommu: Using direct mapping for device 0000:00:14.4
[ 2.062330] iommu: Adding device 0000:00:14.5 to group 10
[ 2.062336] iommu: Using direct mapping for device 0000:00:14.5
[ 2.062610] iommu: Adding device 0000:00:15.0 to group 11
[ 2.062617] iommu: Using direct mapping for device 0000:00:15.0
[ 2.062631] iommu: Adding device 0000:00:15.1 to group 11
[ 2.062910] iommu: Adding device 0000:00:16.0 to group 12
[ 2.062917] iommu: Using direct mapping for device 0000:00:16.0
[ 2.062930] iommu: Adding device 0000:00:16.2 to group 12
[ 2.063210] iommu: Adding device 0000:01:00.0 to group 13
[ 2.063218] iommu: Using direct mapping for device 0000:01:00.0
[ 2.063236] iommu: Adding device 0000:01:00.1 to group 13
[ 2.063514] iommu: Adding device 0000:02:00.0 to group 14
[ 2.063520] iommu: Using direct mapping for device 0000:02:00.0
[ 2.063538] iommu: Adding device 0000:02:00.1 to group 14
[ 2.063805] iommu: Adding device 0000:03:00.0 to group 15
[ 2.063811] iommu: Using direct mapping for device 0000:03:00.0
[ 2.063819] iommu: Adding device 0000:04:06.0 to group 9
[ 2.063830] iommu: Adding device 0000:05:00.0 to group 11
[ 2.063841] iommu: Adding device 0000:06:00.0 to group 11
[ 2.135912] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 2.135913] AMD-Vi: Interrupt remapping enabled
[ 2.135987] AMD-Vi: Lazy IO/TLB flushing enabled
[ 2.135989] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 2.135990] software IO TLB [mem 0x99d96000-0x9dd96000] (64MB) mapped at [ffff880099d96000-ffff88009dd95fff]
[ 2.136007] perf: AMD NB counters detected
[ 2.136042] LVT offset 0 assigned for vector 0x400
[ 2.136057] perf: AMD IBS detected (0x000000ff)
[ 2.136089] Scanning for low memory corruption every 60 seconds
[ 2.136337] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 2.136566] Initialise system trusted keyrings
[ 2.136679] workingset: timestamp_bits=38 max_order=22 bucket_order=0
[ 2.138109] zbud: loaded
[ 2.138267] Key type big_key registered
[ 2.138508] Key type asymmetric registered
[ 2.138557] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 2.138595] io scheduler noop registered
[ 2.138596] io scheduler deadline registered
[ 2.138621] io scheduler cfq registered (default)
[ 2.138947] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 2.138951] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 2.138959] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 2.138960] vesafb: scrolling: redraw
[ 2.138961] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 2.138971] vesafb: framebuffer at 0xb1000000, mapped to 0xffffc90002000000, using 5120k, total 5120k
[ 2.182072] Console: switching to colour frame buffer device 160x64
[ 2.224935] fb0: VESA VGA frame buffer device
[ 2.225497] GHES: HEST is not enabled!
[ 2.225544] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 2.246067] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 2.246364] Linux agpgart interface v0.103
[ 2.246928] rtc_cmos 00:04: RTC can wake from S4
[ 2.247017] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 2.247040] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 2.247049] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.247255] NET: Registered protocol family 10
[ 2.247401] NET: Registered protocol family 17
[ 2.247851] microcode: CPU0: patch_level=0x06000822
[ 2.247858] microcode: CPU1: patch_level=0x06000822
[ 2.247865] microcode: CPU2: patch_level=0x06000822
[ 2.247872] microcode: CPU3: patch_level=0x06000822
[ 2.247879] microcode: CPU4: patch_level=0x06000822
[ 2.247885] microcode: CPU5: patch_level=0x06000822
[ 2.247892] microcode: CPU6: patch_level=0x06000822
[ 2.247896] microcode: CPU7: patch_level=0x06000822
[ 2.247926] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 2.248023] registered taskstats version 1
[ 2.248025] Loading compiled-in X.509 certificates
[ 2.248036] zswap: loaded using pool lzo/zbud
[ 2.249667] Magic number: 4:283:542
[ 2.249772] rtc_cmos 00:04: setting system clock to 2016-10-13 17:32:49 UTC (1476379969)
[ 2.249828] PM: Hibernation image not present or could not be loaded.
[ 2.250635] Freeing unused kernel memory: 1244K (ffffffff818f6000 - ffffffff81a2d000)
[ 2.250636] Write protecting the kernel read-only data: 8192k
[ 2.250840] Freeing unused kernel memory: 128K (ffff8800015e0000 - ffff880001600000)
[ 2.251118] Freeing unused kernel memory: 160K (ffff8800017d8000 - ffff880001800000)
[ 2.257270] random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.257334] random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.258866] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.258902] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.259601] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.259605] VFIO - User Level meta-driver version: 0.3
[ 2.259614] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.259620] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.259794] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.259803] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.259815] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 2.264141] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none
[ 2.276173] vfio_pci: add [10de:13c2[ffff:ffff]] class 0x000000/00000000
[ 2.289505] vfio_pci: add [10de:0fbb[ffff:ffff]] class 0x000000/00000000
[ 2.314301] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 2.314709] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.314743] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.318859] ACPI: bus type USB registered
[ 2.318892] usbcore: registered new interface driver usbfs
[ 2.318906] usbcore: registered new interface driver hub
[ 2.318945] usbcore: registered new device driver usb
[ 2.319006] SCSI subsystem initialized
[ 2.319461] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.319732] ehci-pci: EHCI PCI platform driver
[ 2.319844] QUIRK: Enable AMD PLL fix
[ 2.319867] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 2.319875] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 2.319880] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.319888] ehci-pci 0000:00:12.2: debug port 1
[ 2.319924] ehci-pci 0000:00:12.2: irq 17, io mem 0xf5105000
[ 2.320185] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.320931] libata version 3.00 loaded.
[ 2.329420] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 2.329594] hub 1-0:1.0: USB hub found
[ 2.329599] hub 1-0:1.0: 5 ports detected
[ 2.329750] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.329756] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 2.329827] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 2.330025] hub 2-0:1.0: USB hub found
[ 2.330033] hub 2-0:1.0: 2 ports detected
[ 2.330131] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 2.330134] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 2.330142] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 2.330149] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.330251] hub 3-0:1.0: USB hub found
[ 2.330258] hub 3-0:1.0: 2 ports detected
[ 2.330336] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 2.330342] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.330379] ehci-pci 0000:00:13.2: debug port 1
[ 2.330401] ehci-pci 0000:00:13.2: irq 17, io mem 0xf5103000
[ 2.339408] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 2.339546] hub 4-0:1.0: USB hub found
[ 2.339551] hub 4-0:1.0: 5 ports detected
[ 2.339669] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.339678] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[ 2.339770] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 2.339962] hub 5-0:1.0: USB hub found
[ 2.339970] hub 5-0:1.0: 2 ports detected
[ 2.340059] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 2.340062] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[ 2.340069] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 2.340104] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 2.340204] hub 6-0:1.0: USB hub found
[ 2.340211] hub 6-0:1.0: 2 ports detected
[ 2.340293] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[ 2.340296] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 2.340304] ehci-pci 0000:00:16.2: debug port 1
[ 2.340339] ehci-pci 0000:00:16.2: irq 17, io mem 0xf5100000
[ 2.349437] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 2.349570] hub 7-0:1.0: USB hub found
[ 2.349575] hub 7-0:1.0: 4 ports detected
[ 2.349689] ahci 0000:00:11.0: version 3.0
[ 2.349914] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 2.349919] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 2.350005] ohci-pci: OHCI PCI platform driver
[ 2.350799] scsi host0: ahci
[ 2.350896] scsi host1: ahci
[ 2.350978] scsi host2: ahci
[ 2.351089] scsi host3: ahci
[ 2.351181] scsi host4: ahci
[ 2.351272] scsi host5: ahci
[ 2.351330] ata1: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107100 irq 19
[ 2.351332] ata2: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107180 irq 19
[ 2.351334] ata3: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107200 irq 19
[ 2.351336] ata4: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107280 irq 19
[ 2.351338] ata5: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107300 irq 19
[ 2.351340] ata6: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107380 irq 19
[ 2.351431] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 2.351436] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[ 2.351461] ohci-pci 0000:00:12.0: irq 18, io mem 0xf5106000
[ 2.406972] hub 8-0:1.0: USB hub found
[ 2.406980] hub 8-0:1.0: 5 ports detected
[ 2.407164] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 2.407169] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[ 2.407183] ohci-pci 0000:00:13.0: irq 18, io mem 0xf5104000
[ 2.463651] hub 9-0:1.0: USB hub found
[ 2.463659] hub 9-0:1.0: 5 ports detected
[ 2.463842] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 2.463847] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[ 2.463860] ohci-pci 0000:00:14.5: irq 18, io mem 0xf5102000
[ 2.520302] hub 10-0:1.0: USB hub found
[ 2.520310] hub 10-0:1.0: 2 ports detected
[ 2.520459] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 2.520463] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[ 2.520481] ohci-pci 0000:00:16.0: irq 18, io mem 0xf5101000
[ 2.576964] hub 11-0:1.0: USB hub found
[ 2.576971] hub 11-0:1.0: 4 ports detected
[ 2.636083] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.660468] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.660554] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.762153] hub 1-1:1.0: USB hub found
[ 2.762481] hub 1-1:1.0: 3 ports detected
[ 2.816091] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.816165] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.816193] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.816218] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.816438] ata4.00: ATAPI: ATAPI iHAS124 A, BL0P, max UDMA/100
[ 2.817248] ata4.00: configured for UDMA/100
[ 2.817321] ata3.00: ATA-8: ST3750528AS, CC46, max UDMA/133
[ 2.817322] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.817861] ata2.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 2.817863] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.818771] ata3.00: configured for UDMA/133
[ 2.819729] ata2.00: configured for UDMA/133
[ 2.827966] ata1.00: ATA-8: OCZ-VERTEX3, 2.25, max UDMA/133
[ 2.827969] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.839561] ata1.00: configured for UDMA/133
[ 2.839756] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.25 PQ: 0 ANSI: 5
[ 2.879826] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 2.892728] usb 9-2: new full-speed USB device number 2 using ohci-pci
[ 2.902729] usb 4-5: new high-speed USB device number 3 using ehci-pci
[ 2.912939] scsi 2:0:0:0: Direct-Access ATA ST3750528AS CC46 PQ: 0 ANSI: 5
[ 2.940680] scsi 3:0:0:0: CD-ROM ATAPI iHAS124 A BL0P PQ: 0 ANSI: 5
[ 2.952091] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.952122] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.952147] sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 2.952155] sd 0:0:0:0: [sda] Write Protect is off
[ 2.952158] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.952181] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.952183] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.952185] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.952194] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.952197] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.952208] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.952223] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.954197] sda: sda1 sda2 sda3
[ 2.954539] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2.962003] sdb: sdb1 sdb2 sdb3 sdb4
[ 2.962356] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 2.965512] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.965515] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.965649] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.974804] sdc: sdc1
[ 2.975230] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 3.054453] usb 9-2: config 1 has an invalid interface number: 4 but max is 3
[ 3.054456] usb 9-2: config 1 has no interface number 3
[ 3.116007] usb 8-2: new full-speed USB device number 2 using ohci-pci
[ 3.139340] tsc: Refined TSC clocksource calibration: 4420.210 MHz
[ 3.139344] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3fb6f9b1e1f, max_idle_ns: 440795366705 ns
[ 3.526015] usb 8-3: new full-speed USB device number 3 using ohci-pci
[ 3.628830] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 3.693487] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 3.711574] systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 3.711729] systemd[1]: Detected architecture x86-64.
[ 3.711888] systemd[1]: Set hostname to <AndreiArch-PC>.
[ 3.762090] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.762195] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.765370] systemd[1]: Listening on Process Core Dump Socket.
[ 3.765385] systemd[1]: Reached target Encrypted Volumes.
[ 3.765421] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.765446] systemd[1]: Listening on udev Control Socket.
[ 3.765690] systemd[1]: Created slice User and Session Slice.
[ 3.765711] systemd[1]: Listening on udev Kernel Socket.
[ 3.765748] systemd[1]: Listening on Journal Socket.
[ 3.765762] systemd[1]: Reached target Login Prompts.
[ 3.765773] systemd[1]: Reached target Remote File Systems.
[ 3.765854] systemd[1]: Created slice System Slice.
[ 3.779508] systemd[1]: Starting Setup Virtual Console...
[ 3.780674] systemd[1]: Starting Load Kernel Modules...
[ 3.781082] systemd[1]: Mounting Huge Pages File System...
[ 3.781542] systemd[1]: Mounting Debug File System...
[ 3.781986] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.782441] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.782498] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.782517] systemd[1]: Reached target Paths.
[ 3.782685] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.782722] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.782768] systemd[1]: Listening on Network Service Netlink Socket.
[ 3.782867] systemd[1]: Created slice system-getty.slice.
[ 3.783992] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.784520] systemd[1]: Starting Journal Service...
[ 3.784535] systemd[1]: Reached target Slices.
[ 3.784577] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.785008] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.786167] systemd[1]: Mounted Huge Pages File System.
[ 3.786427] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 3.786794] systemd[1]: Mounted Debug File System.
[ 3.786803] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[ 3.787104] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.787783] systemd[1]: Started Remount Root and Kernel File Systems.
[ 3.788480] systemd[1]: Starting Load/Save Random Seed...
[ 3.790600] systemd[1]: Starting udev Coldplug all Devices...
[ 3.791153] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 3.794114] systemd[1]: Started Load/Save Random Seed.
[ 3.794476] systemd[1]: Started Load Kernel Modules.
[ 3.795179] systemd[1]: Mounting Configuration File System...
[ 3.795851] systemd[1]: Starting Apply Kernel Variables...
[ 3.797187] systemd[1]: Mounted Configuration File System.
[ 3.811490] systemd[1]: Started Apply Kernel Variables.
[ 3.822218] systemd[1]: Started Create Static Device Nodes in /dev.
[ 3.822300] systemd[1]: Reached target Local File Systems (Pre).
[ 3.822897] systemd[1]: Starting udev Kernel Device Manager...
[ 3.826746] systemd[1]: Started udev Coldplug all Devices.
[ 3.843440] systemd[1]: Started Setup Virtual Console.
[ 3.890942] systemd[1]: Started udev Kernel Device Manager.
[ 3.903939] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.903944] ACPI: Power Button [PWRB]
[ 3.903988] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.903990] ACPI: Power Button [PWRF]
[ 3.906663] acpi_cpufreq: overriding BIOS provided _PSD data
[ 3.910457] wmi: Mapper loaded
[ 3.914485] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 3.946091] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 3.948389] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 3.948404] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 3.948760] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 3.949207] usb 8-4: new full-speed USB device number 4 using ohci-pci
[ 3.950614] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 3.950679] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
[ 3.950682] sp5100_tco: I/O address 0x0cd6 already in use
[ 3.951584] random: nonblocking pool is initialized
[ 3.959333] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 3.959344] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 3.960231] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc900018b2000, 94:de:80:2b:cb:bd, XID 0c900800 IRQ 31
[ 3.960234] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 3.964138] [drm] Initialized drm 1.1.0 20060810
[ 3.967467] systemd[1]: Found device OCZ-VERTEX3 2.
[ 3.969442] snd_hda_intel 0000:02:00.1: Disabling MSI
[ 3.969451] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 3.970449] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.980516] AVX version of gcm_enc/dec engaged.
[ 3.980518] AES CTR mode by8 optimization enabled
[ 3.982615] systemd[1]: Activating swap /dev/disk/by-uuid/1dac7b01-293b-4939-9679-3755d07893aa...
[ 3.985301] systemd[1]: Found device OCZ-VERTEX3 Boot.
[ 3.988959] systemd[1]: Starting File System Check on /dev/disk/by-uuid/c1a85904-9785-452c-8709-973de412e9fb...
[ 3.990795] Adding 5242876k swap on /dev/sda2. Priority:-1 extents:1 across:5242876k SSFS
[ 3.992816] systemd[1]: Activated swap /dev/disk/by-uuid/1dac7b01-293b-4939-9679-3755d07893aa.
[ 3.992892] systemd[1]: Started Journal Service.
[ 4.000309] usb 9-2: 1:1: cannot get freq at ep 0x1
[ 4.006032] systemd-journald[230]: Received request to flush runtime journal from PID 1
[ 4.010299] usb 9-2: 1:2: cannot get freq at ep 0x1
[ 4.022305] usb 9-2: 2:1: cannot get freq at ep 0x82
[ 4.023607] kvm: Nested Virtualization enabled
[ 4.023611] kvm: Nested Paging disabled
[ 4.023875] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 4.031524] usbcore: registered new interface driver snd-usb-audio
[ 4.061608] nvidia: module license 'NVIDIA' taints kernel.
[ 4.061612] Disabling lock debugging due to kernel taint
[ 4.073889] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none
[ 4.073892] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 4.074949] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 4.085927] vfio-pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 4.086536] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:02:00.0 on minor 0
[ 4.086557] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 4.086561] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 4.086567] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 4.086573] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.98 Mon Sep 19 17:31:03 PDT 2016
[ 4.107274] microcode: CPU0: new patch_level=0x0600084f
[ 4.121870] microcode: CPU2: new patch_level=0x0600084f
[ 4.136697] microcode: CPU4: new patch_level=0x0600084f
[ 4.151444] microcode: CPU6: new patch_level=0x0600084f
[ 4.151503] clocksource: Switched to clocksource tsc
[ 4.173026] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.174477] media: Linux media interface: v0.10
[ 4.181543] Linux video capture interface: v2.00
[ 4.182933] gspca_main: v2.14.0 registered
[ 4.183654] gspca_main: sonixj-2.14.0 probing 0c45:613b
[ 4.195898] input: sonixj as /devices/pci0000:00/0000:00:12.0/usb8/8-2/input/input6
[ 4.196155] usbcore: registered new interface driver sonixj
[ 4.198169] usbhid 8-4:1.2: couldn't find an input interrupt endpoint
[ 4.198537] usbcore: registered new interface driver usbhid
[ 4.198541] usbhid: USB HID core driver
[ 4.203646] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.0/usb8/8-3/8-3:1.0/0003:046D:C332.0001/input/input7
[ 4.203758] hid-generic 0003:046D:C332.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:12.0-3/input0
[ 4.208795] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.0/usb8/8-3/8-3:1.1/0003:046D:C332.0002/input/input8
[ 4.259548] hid-generic 0003:046D:C332.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:12.0-3/input1
[ 4.260043] input: Corsair Corsair STRAFE RGB Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-4/8-4:1.0/0003:1B1C:1B20.0003/input/input9
[ 4.312773] hid-generic 0003:1B1C:1B20.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair STRAFE RGB Gaming Keyboard] on usb-0000:00:12.0-4/input0
[ 4.378834] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 4.382613] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 4.383432] br0: port 1(enp5s0) entered blocking state
[ 4.383442] br0: port 1(enp5s0) entered disabled state
[ 4.383493] device enp5s0 entered promiscuous mode
[ 4.524628] r8169 0000:05:00.0 enp5s0: link down
[ 4.524632] r8169 0000:05:00.0 enp5s0: link down
[ 4.524692] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 4.749612] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card1/input10
[ 4.749686] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card1/input11
[ 4.749755] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card1/input12
[ 4.749818] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card1/input13
[ 4.883599] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 4.905425] Ebtables v2.0 registered
[ 5.288632] NVRM: Your system is not currently configured to drive a VGA console
[ 5.288639] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 5.288643] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 5.288646] NVRM: drivers including, but not limited to, vesafb, may result in
[ 5.288649] NVRM: corruption and stability problems, and is not supported.
[ 7.281294] r8169 0000:05:00.0 enp5s0: link up
[ 7.281808] br0: port 1(enp5s0) entered blocking state
[ 7.281814] br0: port 1(enp5s0) entered forwarding state
[ 7.281933] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes ready
[ 14.311629] hid-generic 0003:1B1C:1B20.0004: usb_submit_urb(ctrl) failed: -1
[ 14.311678] hid-generic 0003:1B1C:1B20.0004: timeout initializing reports
[ 14.312658] input: Corsair Corsair STRAFE RGB Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-4/8-4:1.1/0003:1B1C:1B20.0004/input/input14
[ 14.365243] hid-generic 0003:1B1C:1B20.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Corsair Corsair STRAFE RGB Gaming Keyboard] on usb-0000:00:12.0-4/input1
[ 14.382319] mousedev: PS/2 mouse device common for all miceOffline
#4 2016-10-13 21:51:27
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 12,939
Re: AMD IOMMU Dilemma
Virtualization: AMD-VThat line from lscpu makes clear AMD-Vi is not available.
[ 2.135912] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 2.135913] AMD-Vi: Interrupt remapping enabled
[ 2.135987] AMD-Vi: Lazy IO/TLB flushing enabledThose lines strongly suggest your system should offer AMD-Vi .
There's probably a low-level misconfiguration in your system.
I suggest removing the amd_iommu and iommu parameters for the time being.
Your motherboard appears to be a Gigabyte 990FXA-UD3 .
In the advanced Bios features of your firmware , check whether both virtualization and IOMMU are enabled.
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#5 2016-10-14 07:44:20
- andreigrig
- Member
- Registered: 2016-02-04
- Posts: 20
Re: AMD IOMMU Dilemma
OK, that's a bit weird. I will try without the amd_iommu and iommu settings and post the result. In the MB BIOS both SVM and IOMMU are enabled. These are the only 2 Virtualization options available.
P.S.: That explains the shitty I/O performance that I had trouble debugging also 
. Didn't know that the AMD-Vi should appear under Virtualization as well. Thanks!
EDIT:
After removing the iommu kernel parameters, it looks pretty much the same.
rchitecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 8
On-line CPU(s) list: 0-7
Thread(s) per core: 2
Core(s) per socket: 4
Socket(s): 1
NUMA node(s): 1
Vendor ID: AuthenticAMD
CPU family: 21
Model: 2
Model name: AMD FX(tm)-8320 Eight-Core Processor
Stepping: 0
CPU MHz: 1400.000
CPU max MHz: 4400.0000
CPU min MHz: 1400.0000
BogoMIPS: 8843.71
Virtualization: AMD-V
L1d cache: 16K
L1i cache: 64K
L2 cache: 2048K
L3 cache: 8192K
NUMA node0 CPU(s): 0-7
Flags: fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good nopl nonstop_tsc extd_apicid aperfmperf eagerfpu pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 popcnt aes xsave avx f16c lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb cpb hw_pstate vmmcall bmi1 arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold[ 0.000000] Linux version 4.7.6-1-ARCH (builduser@tobias) (gcc version 6.2.1 20160830 (GCC) ) #1 SMP PREEMPT Fri Sep 30 19:28:42 CEST 2016
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/OCZvg-Root rw quiet
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009dd95fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009dd96000-0x000000009ddc5fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009ddc6000-0x000000009ddd5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009ddd6000-0x000000009e1c4fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009e1c5000-0x000000009edc1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009edc2000-0x000000009edc2fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009edc3000-0x000000009efc8fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009efc9000-0x000000009f44afff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009f44b000-0x000000009f7dbfff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009f7dc000-0x000000009f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec20000-0x00000000fec20fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed61000-0x00000000fed70fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100001000-0x000000045effffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./990FXA-UD3, BIOS FDk 10/07/2014
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x45f000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-through
[ 0.000000] C0000-CEFFF write-protect
[ 0.000000] CF000-EBFFF uncachable
[ 0.000000] EC000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFE0000000 write-back
[ 0.000000] 2 base 00009F800000 mask FFFFFF800000 uncachable
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 000000045f000000 aka 17904M
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: update [mem 0x9f800000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x9f800 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fd870-0x000fd87f] mapped at [ffff8800000fd870]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01b58000, 0x01b58fff] PGTABLE
[ 0.000000] BRK [0x01b59000, 0x01b59fff] PGTABLE
[ 0.000000] BRK [0x01b5a000, 0x01b5afff] PGTABLE
[ 0.000000] BRK [0x01b5b000, 0x01b5bfff] PGTABLE
[ 0.000000] BRK [0x01b5c000, 0x01b5cfff] PGTABLE
[ 0.000000] BRK [0x01b5d000, 0x01b5dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x369d1000-0x374dffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 ALASKA)
[ 0.000000] ACPI: XSDT 0x000000009DDCF070 00005C (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000009DDD4AE0 0000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20160422/tbfadt-658)
[ 0.000000] ACPI: DSDT 0x000000009DDCF158 005985 (v02 ALASKA A M I 00000088 INTL 20051117)
[ 0.000000] ACPI: FACS 0x000000009E1BFF80 000040
[ 0.000000] ACPI: APIC 0x000000009DDD4BD8 00009E (v03 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000009DDD4C78 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000009DDD4CC0 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
[ 0.000000] ACPI: SSDT 0x000000009DDD4D00 000D3C (v01 AMD POWERNOW 00000001 AMD 00000001)
[ 0.000000] ACPI: MATS 0x000000009DDD5A40 000034 (v02 ALASKA A M I 00000002 w?x2 00000000)
[ 0.000000] ACPI: IVRS 0x000000009DDD5A78 0000D0 (v01 AMD RD890S 00202031 AMD 00000000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000045effffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x45eff6000-0x45eff9fff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000045effffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000009dd95fff]
[ 0.000000] node 0: [mem 0x000000009edc2000-0x000000009edc2fff]
[ 0.000000] node 0: [mem 0x000000009efc9000-0x000000009f44afff]
[ 0.000000] node 0: [mem 0x000000009f7dc000-0x000000009f7fffff]
[ 0.000000] node 0: [mem 0x0000000100001000-0x000000045effffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000045effffff]
[ 0.000000] On node 0 totalpages: 4182489
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10057 pages used for memmap
[ 0.000000] DMA32 zone: 643645 pages, LIFO batch:31
[ 0.000000] Normal zone: 55232 pages used for memmap
[ 0.000000] Normal zone: 3534847 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 9, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] IOAPIC[1]: apic_id 10, version 33, address 0xfec20000, GSI 24-55
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9dd96000-0x9ddc5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ddc6000-0x9ddd5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9ddd6000-0x9e1c4fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9e1c5000-0x9edc1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9edc3000-0x9efc8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f44b000-0x9f7dbfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9f800000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfec0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfec1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec20000-0xfec20fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec21000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed60fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed61000-0xfed70fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed71000-0xfed7ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfeefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xffffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x100000000-0x100000fff]
[ 0.000000] e820: [mem 0x9f800000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 33 pages/cpu @ffff88045ec00000 s97944 r8192 d29032 u262144
[ 0.000000] pcpu-alloc: s97944 r8192 d29032 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 4117115
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/OCZvg-Root rw quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] AGP: Node 0: aperture [bus addr 0xf8000000-0xfbffffff] (64MB)
[ 0.000000] Memory: 16377364K/16729956K available (6000K kernel code, 979K rwdata, 1888K rodata, 1244K init, 1164K bss, 352592K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:1032 16
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 4420.182 MHz processor
[ 0.000016] Calibrating delay loop (skipped), value calculated using timer frequency.. 8843.71 BogoMIPS (lpj=14733940)
[ 0.000018] pid_max: default: 32768 minimum: 301
[ 0.000023] ACPI: Core revision 20160422
[ 0.002257] ACPI: 2 ACPI AML tables successfully acquired and loaded
[ 0.002275] Security Framework initialized
[ 0.002276] Yama: becoming mindful.
[ 0.003073] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.006511] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.008013] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008028] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.008283] CPU: Physical Processor ID: 0
[ 0.008284] CPU: Processor Core ID: 0
[ 0.008285] mce: CPU supports 7 MCE banks
[ 0.008290] LVT offset 1 assigned for vector 0xf9
[ 0.008295] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[ 0.008296] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[ 0.008506] Freeing SMP alternatives memory: 24K (ffffffff81a2d000 - ffffffff81a33000)
[ 0.012748] ftrace: allocating 23850 entries in 94 pages
[ 0.018977] smpboot: Max logical packages: 2
[ 0.018979] smpboot: APIC(10) Converting physical 1 to logical package 0
[ 0.091759] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.230758] smpboot: CPU0: AMD FX(tm)-8320 Eight-Core Processor (family: 0x15, model: 0x2, stepping: 0x0)
[ 0.230761] Performance Events: Fam15h core perfctr, AMD PMU driver.
[ 0.230764] ... version: 0
[ 0.230765] ... bit width: 48
[ 0.230766] ... generic registers: 6
[ 0.230767] ... value mask: 0000ffffffffffff
[ 0.230767] ... max period: 00007fffffffffff
[ 0.230768] ... fixed-purpose events: 0
[ 0.230769] ... event mask: 000000000000003f
[ 0.254171] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.270805] x86: Booting SMP configuration:
[ 0.270807] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
[ 0.936095] x86: Booted up 1 node, 8 CPUs
[ 0.936098] smpboot: Total of 8 processors activated (70746.47 BogoMIPS)
[ 0.945633] devtmpfs: initialized
[ 0.945689] x86/mm: Memory block size: 128MB
[ 0.949427] PM: Registering ACPI NVS region [mem 0x9ddd6000-0x9e1c4fff] (4124672 bytes)
[ 0.949470] PM: Registering ACPI NVS region [mem 0x9edc3000-0x9efc8fff] (2121728 bytes)
[ 0.949550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.949590] pinctrl core: initialized pinctrl subsystem
[ 0.949620] RTC time: 18:12:40, date: 10/14/16
[ 0.949700] NET: Registered protocol family 16
[ 0.960711] cpuidle: using governor ladder
[ 0.974068] cpuidle: using governor menu
[ 0.974147] ACPI: bus type PCI registered
[ 0.974148] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.974197] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.974199] PCI: not using MMCONFIG
[ 0.974200] PCI: Using configuration type 1 for base access
[ 0.974201] PCI: Using configuration type 1 for extended access
[ 0.974580] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.974581] mtrr: probably your BIOS does not setup all CPUs.
[ 0.974582] mtrr: corrected configuration.
[ 0.987532] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.987533] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.987828] ACPI: Added _OSI(Module Device)
[ 0.987829] ACPI: Added _OSI(Processor Device)
[ 0.987831] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.987832] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.988097] ACPI: Executed 3 blocks of module-level executable AML code
[ 0.990383] ACPI: Interpreter enabled
[ 0.990395] ACPI: (supports S0 S3 S4 S5)
[ 0.990396] ACPI: Using IOAPIC for interrupt routing
[ 0.990498] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.990524] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.990533] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.994498] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.994502] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.994505] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.994729] PCI host bridge to bus 0000:00
[ 0.994731] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
[ 0.994732] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
[ 0.994734] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
[ 0.994735] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.994736] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.994737] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[ 0.994738] pci_bus 0000:00: root bus resource [mem 0xa0000000-0xffffffff window]
[ 0.994740] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.994747] pci 0000:00:00.0: [1002:5a14] type 00 class 0x060000
[ 0.994860] pci 0000:00:00.2: [1002:5a23] type 00 class 0x080600
[ 0.994943] pci 0000:00:02.0: [1002:5a16] type 01 class 0x060400
[ 0.994970] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.995005] pci 0000:00:02.0: System wakeup disabled by ACPI
[ 0.995035] pci 0000:00:04.0: [1002:5a18] type 01 class 0x060400
[ 0.995062] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
[ 0.995096] pci 0000:00:04.0: System wakeup disabled by ACPI
[ 0.995128] pci 0000:00:09.0: [1002:5a1c] type 01 class 0x060400
[ 0.995155] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[ 0.995188] pci 0000:00:09.0: System wakeup disabled by ACPI
[ 0.995227] pci 0000:00:11.0: [1002:4391] type 00 class 0x010601
[ 0.995239] pci 0000:00:11.0: reg 0x10: [io 0xf040-0xf047]
[ 0.995246] pci 0000:00:11.0: reg 0x14: [io 0xf030-0xf033]
[ 0.995252] pci 0000:00:11.0: reg 0x18: [io 0xf020-0xf027]
[ 0.995259] pci 0000:00:11.0: reg 0x1c: [io 0xf010-0xf013]
[ 0.995266] pci 0000:00:11.0: reg 0x20: [io 0xf000-0xf00f]
[ 0.995272] pci 0000:00:11.0: reg 0x24: [mem 0xf5107000-0xf51073ff]
[ 0.995357] pci 0000:00:12.0: [1002:4397] type 00 class 0x0c0310
[ 0.995366] pci 0000:00:12.0: reg 0x10: [mem 0xf5106000-0xf5106fff]
[ 0.995436] pci 0000:00:12.0: System wakeup disabled by ACPI
[ 0.995469] pci 0000:00:12.2: [1002:4396] type 00 class 0x0c0320
[ 0.995481] pci 0000:00:12.2: reg 0x10: [mem 0xf5105000-0xf51050ff]
[ 0.995537] pci 0000:00:12.2: supports D1 D2
[ 0.995538] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.995572] pci 0000:00:12.2: System wakeup disabled by ACPI
[ 0.995605] pci 0000:00:13.0: [1002:4397] type 00 class 0x0c0310
[ 0.995615] pci 0000:00:13.0: reg 0x10: [mem 0xf5104000-0xf5104fff]
[ 0.995685] pci 0000:00:13.0: System wakeup disabled by ACPI
[ 0.995719] pci 0000:00:13.2: [1002:4396] type 00 class 0x0c0320
[ 0.995730] pci 0000:00:13.2: reg 0x10: [mem 0xf5103000-0xf51030ff]
[ 0.995786] pci 0000:00:13.2: supports D1 D2
[ 0.995788] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.995821] pci 0000:00:13.2: System wakeup disabled by ACPI
[ 0.995855] pci 0000:00:14.0: [1002:4385] type 00 class 0x0c0500
[ 0.995956] pci 0000:00:14.3: [1002:439d] type 00 class 0x060100
[ 0.996101] pci 0000:00:14.4: [1002:4384] type 01 class 0x060401
[ 0.996156] pci 0000:00:14.4: System wakeup disabled by ACPI
[ 0.996186] pci 0000:00:14.5: [1002:4399] type 00 class 0x0c0310
[ 0.996196] pci 0000:00:14.5: reg 0x10: [mem 0xf5102000-0xf5102fff]
[ 0.996266] pci 0000:00:14.5: System wakeup disabled by ACPI
[ 0.996301] pci 0000:00:15.0: [1002:43a0] type 01 class 0x060400
[ 0.996349] pci 0000:00:15.0: supports D1 D2
[ 0.996384] pci 0000:00:15.0: System wakeup disabled by ACPI
[ 0.996416] pci 0000:00:15.1: [1002:43a1] type 01 class 0x060400
[ 0.996464] pci 0000:00:15.1: supports D1 D2
[ 0.996499] pci 0000:00:15.1: System wakeup disabled by ACPI
[ 0.996535] pci 0000:00:16.0: [1002:4397] type 00 class 0x0c0310
[ 0.996544] pci 0000:00:16.0: reg 0x10: [mem 0xf5101000-0xf5101fff]
[ 0.996614] pci 0000:00:16.0: System wakeup disabled by ACPI
[ 0.996646] pci 0000:00:16.2: [1002:4396] type 00 class 0x0c0320
[ 0.996658] pci 0000:00:16.2: reg 0x10: [mem 0xf5100000-0xf51000ff]
[ 0.996714] pci 0000:00:16.2: supports D1 D2
[ 0.996715] pci 0000:00:16.2: PME# supported from D0 D1 D2 D3hot
[ 0.996748] pci 0000:00:16.2: System wakeup disabled by ACPI
[ 0.996780] pci 0000:00:18.0: [1022:1600] type 00 class 0x060000
[ 0.996838] pci 0000:00:18.1: [1022:1601] type 00 class 0x060000
[ 0.996894] pci 0000:00:18.2: [1022:1602] type 00 class 0x060000
[ 0.996950] pci 0000:00:18.3: [1022:1603] type 00 class 0x060000
[ 0.997009] pci 0000:00:18.4: [1022:1604] type 00 class 0x060000
[ 0.997064] pci 0000:00:18.5: [1022:1605] type 00 class 0x060000
[ 0.997154] pci 0000:01:00.0: [10de:13c2] type 00 class 0x030000
[ 0.997162] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.997168] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.997174] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.997178] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.997182] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.997283] pci 0000:01:00.1: [10de:0fbb] type 00 class 0x040300
[ 0.997291] pci 0000:01:00.1: reg 0x10: [mem 0xf7080000-0xf7083fff]
[ 1.006103] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.006106] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.006108] pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.006111] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.006145] pci 0000:02:00.0: [10de:0a65] type 00 class 0x030000
[ 1.006154] pci 0000:02:00.0: reg 0x10: [mem 0xf4000000-0xf4ffffff]
[ 1.006163] pci 0000:02:00.0: reg 0x14: [mem 0xa0000000-0xafffffff 64bit pref]
[ 1.006171] pci 0000:02:00.0: reg 0x1c: [mem 0xb0000000-0xb1ffffff 64bit pref]
[ 1.006176] pci 0000:02:00.0: reg 0x24: [io 0xd000-0xd07f]
[ 1.006182] pci 0000:02:00.0: reg 0x30: [mem 0xf5000000-0xf507ffff pref]
[ 1.006258] pci 0000:02:00.1: [10de:0be3] type 00 class 0x040300
[ 1.006267] pci 0000:02:00.1: reg 0x10: [mem 0xf5080000-0xf5083fff]
[ 1.012769] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.012773] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 1.012774] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 1.012777] pci 0000:00:04.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.012814] pci 0000:03:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 1.012830] pci 0000:03:00.0: reg 0x10: [mem 0xf7300000-0xf7307fff 64bit]
[ 1.012896] pci 0000:03:00.0: supports D1 D2
[ 1.012897] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.019435] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 1.019439] pci 0000:00:09.0: bridge window [mem 0xf7300000-0xf73fffff]
[ 1.019479] pci 0000:04:06.0: [13f6:8788] type 00 class 0x040100
[ 1.019494] pci 0000:04:06.0: reg 0x10: [io 0xc000-0xc0ff]
[ 1.019572] pci 0000:04:06.0: supports D1 D2
[ 1.019627] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[ 1.019630] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 1.019635] pci 0000:00:14.4: bridge window [io 0x0000-0x03af window] (subtractive decode)
[ 1.019636] pci 0000:00:14.4: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
[ 1.019637] pci 0000:00:14.4: bridge window [io 0x03b0-0x03df window] (subtractive decode)
[ 1.019638] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 1.019639] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 1.019641] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[ 1.019642] pci 0000:00:14.4: bridge window [mem 0xa0000000-0xffffffff window] (subtractive decode)
[ 1.019695] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 1.019711] pci 0000:05:00.0: reg 0x10: [io 0xb000-0xb0ff]
[ 1.019735] pci 0000:05:00.0: reg 0x18: [mem 0xd2104000-0xd2104fff 64bit pref]
[ 1.019750] pci 0000:05:00.0: reg 0x20: [mem 0xd2100000-0xd2103fff 64bit pref]
[ 1.019827] pci 0000:05:00.0: supports D1 D2
[ 1.019828] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.019868] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 1.026105] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 1.026109] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 1.026114] pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 1.026163] pci 0000:06:00.0: [1b6f:7023] type 00 class 0x0c0330
[ 1.026184] pci 0000:06:00.0: reg 0x10: [mem 0xf7200000-0xf7207fff 64bit]
[ 1.026276] pci 0000:06:00.0: supports D1 D2
[ 1.026277] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 1.032771] pci 0000:00:15.1: PCI bridge to [bus 06]
[ 1.032777] pci 0000:00:15.1: bridge window [mem 0xf7200000-0xf72fffff]
[ 1.033108] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[ 1.033155] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[ 1.033204] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[ 1.033251] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[ 1.033289] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 10 11 14 15) *0
[ 1.033319] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 10 11 14 15) *0
[ 1.033348] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 10 11 14 15) *0
[ 1.033377] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 10 11 14 15) *0
[ 1.033544] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 1.033546] vgaarb: setting as boot device: PCI:0000:02:00.0
[ 1.033548] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.033549] vgaarb: loaded
[ 1.033550] vgaarb: bridge control possible 0000:02:00.0
[ 1.033551] vgaarb: bridge control possible 0000:01:00.0
[ 1.033615] PCI: Using ACPI for IRQ routing
[ 1.039666] PCI: pci_cache_line_size set to 64 bytes
[ 1.039715] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 1.039717] e820: reserve RAM buffer [mem 0x9dd96000-0x9fffffff]
[ 1.039718] e820: reserve RAM buffer [mem 0x9edc3000-0x9fffffff]
[ 1.039719] e820: reserve RAM buffer [mem 0x9f44b000-0x9fffffff]
[ 1.039720] e820: reserve RAM buffer [mem 0x9f800000-0x9fffffff]
[ 1.039721] e820: reserve RAM buffer [mem 0x45f000000-0x45fffffff]
[ 1.039796] NetLabel: Initializing
[ 1.039797] NetLabel: domain hash size = 128
[ 1.039797] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.039805] NetLabel: unlabeled traffic allowed by default
[ 1.039902] clocksource: Switched to clocksource refined-jiffies
[ 1.044886] VFS: Disk quotas dquot_6.6.0
[ 1.044900] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.044953] pnp: PnP ACPI init
[ 1.045037] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.045040] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.045224] system 00:01: [io 0x040b] has been reserved
[ 1.045226] system 00:01: [io 0x04d6] has been reserved
[ 1.045227] system 00:01: [io 0x0c00-0x0c01] has been reserved
[ 1.045229] system 00:01: [io 0x0c14] has been reserved
[ 1.045230] system 00:01: [io 0x0c50-0x0c51] has been reserved
[ 1.045231] system 00:01: [io 0x0c52] has been reserved
[ 1.045233] system 00:01: [io 0x0c6c] has been reserved
[ 1.045234] system 00:01: [io 0x0c6f] has been reserved
[ 1.045235] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
[ 1.045237] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
[ 1.045238] system 00:01: [io 0x0cd4-0x0cd5] has been reserved
[ 1.045239] system 00:01: [io 0x0cd6-0x0cd7] has been reserved
[ 1.045240] system 00:01: [io 0x0cd8-0x0cdf] has been reserved
[ 1.045242] system 00:01: [io 0x0800-0x089f] has been reserved
[ 1.045243] system 00:01: [io 0x0b20-0x0b3f] has been reserved
[ 1.045244] system 00:01: [io 0x0900-0x090f] has been reserved
[ 1.045246] system 00:01: [io 0x0910-0x091f] has been reserved
[ 1.045247] system 00:01: [io 0xfe00-0xfefe] has been reserved
[ 1.045249] system 00:01: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 1.045250] system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
[ 1.045252] system 00:01: [mem 0xfed80000-0xfed8ffff] has been reserved
[ 1.045254] system 00:01: [mem 0xfed61000-0xfed70fff] has been reserved
[ 1.045255] system 00:01: [mem 0xfec10000-0xfec10fff] has been reserved
[ 1.045257] system 00:01: [mem 0xfed00000-0xfed00fff] could not be reserved
[ 1.045258] system 00:01: [mem 0xffc00000-0xffffffff] has been reserved
[ 1.045260] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.045370] system 00:02: [io 0x0220-0x0227] has been reserved
[ 1.045371] system 00:02: [io 0x0228-0x0237] has been reserved
[ 1.045373] system 00:02: [io 0x0a20-0x0a2f] has been reserved
[ 1.045374] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.045501] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.045546] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 1.045548] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.045581] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.045672] system 00:06: [mem 0xfeb20000-0xfeb23fff] could not be reserved
[ 1.045674] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.045755] system 00:07: [mem 0xfec20000-0xfec200ff] could not be reserved
[ 1.045757] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.045829] pnp: PnP ACPI: found 8 devices
[ 1.051823] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.051855] clocksource: Switched to clocksource acpi_pm
[ 1.051882] pci 0000:00:02.0: PCI bridge to [bus 01]
[ 1.051885] pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
[ 1.051887] pci 0000:00:02.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.051889] pci 0000:00:02.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.051892] pci 0000:00:04.0: PCI bridge to [bus 02]
[ 1.051893] pci 0000:00:04.0: bridge window [io 0xd000-0xdfff]
[ 1.051895] pci 0000:00:04.0: bridge window [mem 0xf4000000-0xf50fffff]
[ 1.051897] pci 0000:00:04.0: bridge window [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.051899] pci 0000:00:09.0: PCI bridge to [bus 03]
[ 1.051901] pci 0000:00:09.0: bridge window [mem 0xf7300000-0xf73fffff]
[ 1.051931] pci 0000:00:14.4: PCI bridge to [bus 04]
[ 1.051933] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
[ 1.051941] pci 0000:00:15.0: PCI bridge to [bus 05]
[ 1.051943] pci 0000:00:15.0: bridge window [io 0xb000-0xbfff]
[ 1.051947] pci 0000:00:15.0: bridge window [mem 0xd2100000-0xd21fffff 64bit pref]
[ 1.051951] pci 0000:00:15.1: PCI bridge to [bus 06]
[ 1.051953] pci 0000:00:15.1: bridge window [mem 0xf7200000-0xf72fffff]
[ 1.051959] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
[ 1.051960] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
[ 1.051961] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
[ 1.051963] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 1.051964] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.051965] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.051966] pci_bus 0000:00: resource 10 [mem 0xa0000000-0xffffffff window]
[ 1.051968] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.051969] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.051970] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 1.051971] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 1.051972] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf50fffff]
[ 1.051973] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xb1ffffff 64bit pref]
[ 1.051974] pci_bus 0000:03: resource 1 [mem 0xf7300000-0xf73fffff]
[ 1.051976] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
[ 1.051977] pci_bus 0000:04: resource 4 [io 0x0000-0x03af window]
[ 1.051978] pci_bus 0000:04: resource 5 [io 0x03e0-0x0cf7 window]
[ 1.051979] pci_bus 0000:04: resource 6 [io 0x03b0-0x03df window]
[ 1.051980] pci_bus 0000:04: resource 7 [io 0x0d00-0xffff window]
[ 1.051981] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[ 1.051982] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[ 1.051983] pci_bus 0000:04: resource 10 [mem 0xa0000000-0xffffffff window]
[ 1.051985] pci_bus 0000:05: resource 0 [io 0xb000-0xbfff]
[ 1.051986] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd21fffff 64bit pref]
[ 1.051987] pci_bus 0000:06: resource 1 [mem 0xf7200000-0xf72fffff]
[ 1.052003] NET: Registered protocol family 2
[ 1.052153] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.052374] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.052540] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.052572] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.052624] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.052699] NET: Registered protocol family 1
[ 1.348738] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.348916] PCI: CLS 64 bytes, default 64
[ 1.348948] Unpacking initramfs...
[ 1.482003] Freeing initrd memory: 11324K (ffff8800369d1000 - ffff8800374e0000)
[ 1.482552] iommu: Adding device 0000:00:00.0 to group 0
[ 1.482847] iommu: Adding device 0000:00:02.0 to group 1
[ 1.483139] iommu: Adding device 0000:00:04.0 to group 2
[ 1.483430] iommu: Adding device 0000:00:09.0 to group 3
[ 1.483720] iommu: Adding device 0000:00:11.0 to group 4
[ 1.484019] iommu: Adding device 0000:00:12.0 to group 5
[ 1.484031] iommu: Adding device 0000:00:12.2 to group 5
[ 1.484331] iommu: Adding device 0000:00:13.0 to group 6
[ 1.484343] iommu: Adding device 0000:00:13.2 to group 6
[ 1.484635] iommu: Adding device 0000:00:14.0 to group 7
[ 1.484925] iommu: Adding device 0000:00:14.3 to group 8
[ 1.485226] iommu: Adding device 0000:00:14.4 to group 9
[ 1.485517] iommu: Adding device 0000:00:14.5 to group 10
[ 1.485818] iommu: Adding device 0000:00:15.0 to group 11
[ 1.485832] iommu: Adding device 0000:00:15.1 to group 11
[ 1.486133] iommu: Adding device 0000:00:16.0 to group 12
[ 1.486146] iommu: Adding device 0000:00:16.2 to group 12
[ 1.486455] iommu: Adding device 0000:01:00.0 to group 13
[ 1.486474] iommu: Adding device 0000:01:00.1 to group 13
[ 1.486778] iommu: Adding device 0000:02:00.0 to group 14
[ 1.486796] iommu: Adding device 0000:02:00.1 to group 14
[ 1.487089] iommu: Adding device 0000:03:00.0 to group 15
[ 1.487097] iommu: Adding device 0000:04:06.0 to group 9
[ 1.487108] iommu: Adding device 0000:05:00.0 to group 11
[ 1.487118] iommu: Adding device 0000:06:00.0 to group 11
[ 1.559130] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.559131] AMD-Vi: Interrupt remapping enabled
[ 1.559208] AMD-Vi: Lazy IO/TLB flushing enabled
[ 1.560383] perf: AMD NB counters detected
[ 1.560433] LVT offset 0 assigned for vector 0x400
[ 1.560450] perf: AMD IBS detected (0x000000ff)
[ 1.560487] Scanning for low memory corruption every 60 seconds
[ 1.560754] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 1.560998] Initialise system trusted keyrings
[ 1.561129] workingset: timestamp_bits=38 max_order=22 bucket_order=0
[ 1.562603] zbud: loaded
[ 1.562764] Key type big_key registered
[ 1.563088] Key type asymmetric registered
[ 1.563133] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.563178] io scheduler noop registered
[ 1.563179] io scheduler deadline registered
[ 1.563204] io scheduler cfq registered (default)
[ 1.563517] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.563521] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.563530] vesafb: mode is 1280x1024x32, linelength=5120, pages=0
[ 1.563531] vesafb: scrolling: redraw
[ 1.563532] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.563543] vesafb: framebuffer at 0xb1000000, mapped to 0xffffc90002000000, using 5120k, total 5120k
[ 1.606681] Console: switching to colour frame buffer device 160x64
[ 1.649563] fb0: VESA VGA frame buffer device
[ 1.650130] GHES: HEST is not enabled!
[ 1.650207] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.650541] hpet_acpi_add: no address or irqs in _CRS
[ 1.650547] Linux agpgart interface v0.103
[ 1.651086] rtc_cmos 00:03: RTC can wake from S4
[ 1.651180] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 1.651201] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram
[ 1.651210] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.651423] NET: Registered protocol family 10
[ 1.651589] NET: Registered protocol family 17
[ 1.652038] microcode: CPU0: patch_level=0x06000822
[ 1.652046] microcode: CPU1: patch_level=0x06000822
[ 1.652053] microcode: CPU2: patch_level=0x06000822
[ 1.652061] microcode: CPU3: patch_level=0x06000822
[ 1.652068] microcode: CPU4: patch_level=0x06000822
[ 1.652075] microcode: CPU5: patch_level=0x06000822
[ 1.652082] microcode: CPU6: patch_level=0x06000822
[ 1.652087] microcode: CPU7: patch_level=0x06000822
[ 1.652123] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.652239] registered taskstats version 1
[ 1.652241] Loading compiled-in X.509 certificates
[ 1.652252] zswap: loaded using pool lzo/zbud
[ 1.653963] Magic number: 4:155:241
[ 1.653982] memory memory119: hash matches
[ 1.654043] rtc_cmos 00:03: setting system clock to 2016-10-14 18:12:40 UTC (1476468760)
[ 1.654099] PM: Hibernation image not present or could not be loaded.
[ 1.654912] Freeing unused kernel memory: 1244K (ffffffff818f6000 - ffffffff81a2d000)
[ 1.654914] Write protecting the kernel read-only data: 8192k
[ 1.655114] Freeing unused kernel memory: 128K (ffff8800015e0000 - ffff880001600000)
[ 1.655417] Freeing unused kernel memory: 160K (ffff8800017d8000 - ffff880001800000)
[ 1.661476] random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.661541] random: systemd-tmpfile: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.663110] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.663150] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.663158] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.665515] VFIO - User Level meta-driver version: 0.3
[ 1.665532] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.665549] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.665555] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.665764] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.665773] random: systemd-udevd: uninitialized urandom read (16 bytes read, 1 bits of entropy available)
[ 1.670134] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none
[ 1.681992] vfio_pci: add [10de:13c2[ffff:ffff]] class 0x000000/00000000
[ 1.695361] vfio_pci: add [10de:0fbb[ffff:ffff]] class 0x000000/00000000
[ 1.720414] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 1.720850] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.720856] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.725175] ACPI: bus type USB registered
[ 1.725229] usbcore: registered new interface driver usbfs
[ 1.725237] usbcore: registered new interface driver hub
[ 1.725283] usbcore: registered new device driver usb
[ 1.725903] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.725906] SCSI subsystem initialized
[ 1.726256] ehci-pci: EHCI PCI platform driver
[ 1.726371] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.726375] QUIRK: Enable AMD PLL fix
[ 1.726403] ehci-pci 0000:00:12.2: EHCI Host Controller
[ 1.726410] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 1.726415] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.726423] ehci-pci 0000:00:12.2: debug port 1
[ 1.726466] ehci-pci 0000:00:12.2: irq 17, io mem 0xf5105000
[ 1.727590] libata version 3.00 loaded.
[ 1.735244] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.735383] hub 1-0:1.0: USB hub found
[ 1.735389] hub 1-0:1.0: 5 ports detected
[ 1.735529] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.735536] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 1.735631] xhci_hcd 0000:03:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 1.735833] hub 2-0:1.0: USB hub found
[ 1.735841] hub 2-0:1.0: 2 ports detected
[ 1.735938] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 1.735940] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 3
[ 1.735951] ehci-pci 0000:00:13.2: EHCI Host Controller
[ 1.735956] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.736060] hub 3-0:1.0: USB hub found
[ 1.736067] hub 3-0:1.0: 2 ports detected
[ 1.736165] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.736169] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.736180] ehci-pci 0000:00:13.2: debug port 1
[ 1.736209] ehci-pci 0000:00:13.2: irq 17, io mem 0xf5103000
[ 1.745256] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.745390] hub 4-0:1.0: USB hub found
[ 1.745395] hub 4-0:1.0: 5 ports detected
[ 1.745516] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.745523] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 5
[ 1.745624] xhci_hcd 0000:06:00.0: hcc params 0x040050af hci version 0x100 quirks 0x00080490
[ 1.745822] hub 5-0:1.0: USB hub found
[ 1.745829] hub 5-0:1.0: 2 ports detected
[ 1.745929] xhci_hcd 0000:06:00.0: xHCI Host Controller
[ 1.745931] xhci_hcd 0000:06:00.0: new USB bus registered, assigned bus number 6
[ 1.745936] ehci-pci 0000:00:16.2: EHCI Host Controller
[ 1.745945] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.746050] hub 6-0:1.0: USB hub found
[ 1.746057] hub 6-0:1.0: 2 ports detected
[ 1.746146] ehci-pci 0000:00:16.2: new USB bus registered, assigned bus number 7
[ 1.746148] ehci-pci 0000:00:16.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.746156] ehci-pci 0000:00:16.2: debug port 1
[ 1.746259] ehci-pci 0000:00:16.2: irq 17, io mem 0xf5100000
[ 1.755288] ehci-pci 0000:00:16.2: USB 2.0 started, EHCI 1.00
[ 1.755434] hub 7-0:1.0: USB hub found
[ 1.755440] hub 7-0:1.0: 4 ports detected
[ 1.755590] ahci 0000:00:11.0: version 3.0
[ 1.755788] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[ 1.755790] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs
[ 1.755926] ohci-pci: OHCI PCI platform driver
[ 1.756655] scsi host0: ahci
[ 1.756775] scsi host1: ahci
[ 1.756884] scsi host2: ahci
[ 1.756988] scsi host3: ahci
[ 1.757088] scsi host4: ahci
[ 1.757217] scsi host5: ahci
[ 1.757260] ata1: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107100 irq 19
[ 1.757263] ata2: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107180 irq 19
[ 1.757265] ata3: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107200 irq 19
[ 1.757267] ata4: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107280 irq 19
[ 1.757269] ata5: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107300 irq 19
[ 1.757271] ata6: SATA max UDMA/133 abar m1024@0xf5107000 port 0xf5107380 irq 19
[ 1.757369] ohci-pci 0000:00:12.0: OHCI PCI host controller
[ 1.757373] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 8
[ 1.757406] ohci-pci 0000:00:12.0: irq 18, io mem 0xf5106000
[ 1.812850] hub 8-0:1.0: USB hub found
[ 1.812858] hub 8-0:1.0: 5 ports detected
[ 1.813041] ohci-pci 0000:00:13.0: OHCI PCI host controller
[ 1.813045] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 9
[ 1.813060] ohci-pci 0000:00:13.0: irq 18, io mem 0xf5104000
[ 1.869515] hub 9-0:1.0: USB hub found
[ 1.869522] hub 9-0:1.0: 5 ports detected
[ 1.869704] ohci-pci 0000:00:14.5: OHCI PCI host controller
[ 1.869708] ohci-pci 0000:00:14.5: new USB bus registered, assigned bus number 10
[ 1.869723] ohci-pci 0000:00:14.5: irq 18, io mem 0xf5102000
[ 1.926178] hub 10-0:1.0: USB hub found
[ 1.926188] hub 10-0:1.0: 2 ports detected
[ 1.926350] ohci-pci 0000:00:16.0: OHCI PCI host controller
[ 1.926354] ohci-pci 0000:00:16.0: new USB bus registered, assigned bus number 11
[ 1.926369] ohci-pci 0000:00:16.0: irq 18, io mem 0xf5101000
[ 1.982844] hub 11-0:1.0: USB hub found
[ 1.982851] hub 11-0:1.0: 4 ports detected
[ 2.041963] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.066435] ata6: SATA link down (SStatus 0 SControl 300)
[ 2.066542] ata5: SATA link down (SStatus 0 SControl 300)
[ 2.167902] hub 1-1:1.0: USB hub found
[ 2.168206] hub 1-1:1.0: 3 ports detected
[ 2.221976] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.222047] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.222080] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.222114] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.222307] ata4.00: ATAPI: ATAPI iHAS124 A, BL0P, max UDMA/100
[ 2.223114] ata4.00: configured for UDMA/100
[ 2.223284] ata3.00: ATA-8: ST3750528AS, CC46, max UDMA/133
[ 2.223286] ata3.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.223779] ata2.00: ATA-8: WDC WD1003FBYX-01Y7B0, 01.01V01, max UDMA/133
[ 2.223783] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.224750] ata3.00: configured for UDMA/133
[ 2.225655] ata2.00: configured for UDMA/133
[ 2.233715] ata1.00: ATA-8: OCZ-VERTEX3, 2.25, max UDMA/133
[ 2.233722] ata1.00: 234441648 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.243679] ata1.00: configured for UDMA/133
[ 2.244107] scsi 0:0:0:0: Direct-Access ATA OCZ-VERTEX3 2.25 PQ: 0 ANSI: 5
[ 2.269048] scsi 1:0:0:0: Direct-Access ATA WDC WD1003FBYX-0 1V01 PQ: 0 ANSI: 5
[ 2.298636] usb 9-2: new full-speed USB device number 2 using ohci-pci
[ 2.308635] usb 4-5: new high-speed USB device number 3 using ehci-pci
[ 2.309097] scsi 2:0:0:0: Direct-Access ATA ST3750528AS CC46 PQ: 0 ANSI: 5
[ 2.340062] scsi 3:0:0:0: CD-ROM ATAPI iHAS124 A BL0P PQ: 0 ANSI: 5
[ 2.351420] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[ 2.351444] sd 1:0:0:0: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 2.351483] sd 2:0:0:0: [sdc] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 2.351504] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.351507] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.351523] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.351528] sd 0:0:0:0: [sda] Write Protect is off
[ 2.351531] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.351550] sd 2:0:0:0: [sdc] Write Protect is off
[ 2.351553] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 2.351558] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.351573] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.353659] sda: sda1 sda2 sda3
[ 2.354019] sd 0:0:0:0: [sda] Attached SCSI removable disk
[ 2.365091] sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.365098] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.365343] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 2.368586] sdc: sdc1
[ 2.368781] sdb: sdb1
[ 2.368884] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 2.369001] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[ 2.463382] usb 9-2: config 1 has an invalid interface number: 4 but max is 3
[ 2.463385] usb 9-2: config 1 has no interface number 3
[ 2.521894] usb 8-2: new full-speed USB device number 2 using ohci-pci
[ 2.562023] tsc: Refined TSC clocksource calibration: 4420.220 MHz
[ 2.562030] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x3fb7039b1e8, max_idle_ns: 440795369057 ns
[ 2.582121] device-mapper: uevent: version 1.0.3
[ 2.582209] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
[ 2.669073] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.928639] usb 8-3: new full-speed USB device number 3 using ohci-pci
[ 3.098958] hidraw: raw HID events driver (C) Jiri Kosina
[ 3.109942] usbcore: registered new interface driver usbhid
[ 3.109944] usbhid: USB HID core driver
[ 3.110471] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.0/usb8/8-3/8-3:1.0/0003:046D:C332.0001/input/input2
[ 3.110515] hid-generic 0003:046D:C332.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech Gaming Mouse G502] on usb-0000:00:12.0-3/input0
[ 3.115786] input: Logitech Gaming Mouse G502 as /devices/pci0000:00/0000:00:12.0/usb8/8-3/8-3:1.1/0003:046D:C332.0002/input/input3
[ 3.168663] hid-generic 0003:046D:C332.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Logitech Gaming Mouse G502] on usb-0000:00:12.0-3/input1
[ 3.345289] usb 8-4: new full-speed USB device number 4 using ohci-pci
[ 3.519031] input: Corsair Corsair STRAFE RGB Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-4/8-4:1.0/0003:1B1C:1B20.0003/input/input4
[ 3.562176] clocksource: Switched to clocksource tsc
[ 3.572159] hid-generic 0003:1B1C:1B20.0003: input,hidraw2: USB HID v1.11 Keyboard [Corsair Corsair STRAFE RGB Gaming Keyboard] on usb-0000:00:12.0-4/input0
[ 13.575767] hid-generic 0003:1B1C:1B20.0004: usb_submit_urb(ctrl) failed: -1
[ 13.576113] hid-generic 0003:1B1C:1B20.0004: timeout initializing reports
[ 13.576402] input: Corsair Corsair STRAFE RGB Gaming Keyboard as /devices/pci0000:00/0000:00:12.0/usb8/8-4/8-4:1.1/0003:1B1C:1B20.0004/input/input5
[ 13.628937] hid-generic 0003:1B1C:1B20.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [Corsair Corsair STRAFE RGB Gaming Keyboard] on usb-0000:00:12.0-4/input1
[ 13.628980] usbhid 8-4:1.2: couldn't find an input interrupt endpoint
[ 13.696979] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.716584] systemd[1]: systemd 231 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 13.716733] systemd[1]: Detected architecture x86-64.
[ 13.716887] systemd[1]: Set hostname to <AndreiArch-PC>.
[ 13.756529] random: nonblocking pool is initialized
[ 13.763242] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 13.763289] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 13.763314] systemd[1]: Listening on udev Control Socket.
[ 13.763769] systemd[1]: Listening on Process Core Dump Socket.
[ 13.763855] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 13.764099] systemd[1]: Created slice User and Session Slice.
[ 13.764139] systemd[1]: Listening on Network Service Netlink Socket.
[ 13.764217] systemd[1]: Created slice System Slice.
[ 13.764227] systemd[1]: Reached target Slices.
[ 13.764316] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 13.764330] systemd[1]: Listening on udev Kernel Socket.
[ 13.764356] systemd[1]: Listening on Journal Socket.
[ 13.775492] systemd[1]: Mounting Debug File System...
[ 13.777117] systemd[1]: Mounting Configuration File System...
[ 13.777523] systemd[1]: Starting Apply Kernel Variables...
[ 13.777539] systemd[1]: Reached target Remote File Systems.
[ 13.778073] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 13.778517] systemd[1]: Mounting POSIX Message Queue File System...
[ 13.778550] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 13.780131] systemd[1]: Listening on Journal Socket (/dev/log).
[ 13.780143] systemd[1]: Reached target Encrypted Volumes.
[ 13.783398] systemd[1]: Starting Journal Service...
[ 13.783526] systemd[1]: Created slice system-getty.slice.
[ 13.783571] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 13.783583] systemd[1]: Reached target Login Prompts.
[ 13.783625] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 13.783637] systemd[1]: Reached target Paths.
[ 13.784085] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 13.784557] systemd[1]: Mounting Huge Pages File System...
[ 13.785001] systemd[1]: Starting Setup Virtual Console...
[ 13.786109] systemd[1]: Mounted POSIX Message Queue File System.
[ 13.786131] systemd[1]: Mounted Configuration File System.
[ 13.786145] systemd[1]: Mounted Debug File System.
[ 13.786481] systemd[1]: Mounted Huge Pages File System.
[ 13.786819] systemd[1]: Started Apply Kernel Variables.
[ 13.787041] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 13.787394] EXT4-fs (dm-2): re-mounted. Opts: data=ordered
[ 13.788058] systemd[1]: Started Remount Root and Kernel File Systems.
[ 13.788638] systemd[1]: Starting Load/Save Random Seed...
[ 13.789212] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 13.790466] systemd[1]: Starting udev Coldplug all Devices...
[ 13.794657] systemd[1]: Started Load/Save Random Seed.
[ 13.817883] systemd[1]: Started Create Static Device Nodes in /dev.
[ 13.818512] systemd[1]: Starting udev Kernel Device Manager...
[ 13.818530] systemd[1]: Reached target Local File Systems (Pre).
[ 13.827754] systemd[1]: Started udev Coldplug all Devices.
[ 13.838323] systemd[1]: Started Setup Virtual Console.
[ 13.856183] systemd[1]: Started udev Kernel Device Manager.
[ 13.867983] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input6
[ 13.867987] ACPI: Power Button [PWRB]
[ 13.868123] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 13.868125] ACPI: Power Button [PWRF]
[ 13.872989] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 13.873605] acpi_cpufreq: overriding BIOS provided _PSD data
[ 13.874222] wmi: Mapper loaded
[ 13.874856] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.885972] systemd[1]: Started Journal Service.
[ 13.892715] [drm] Initialized drm 1.1.0 20060810
[ 13.913279] systemd-journald[317]: Received request to flush runtime journal from PID 1
[ 13.921760] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[ 13.921767] piix4_smbus 0000:00:14.0: Using register 0x2c for SMBus port selection
[ 13.922122] piix4_smbus 0000:00:14.0: Auxiliary SMBus Host Controller at 0xb20
[ 13.925643] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.925652] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 13.926385] r8169 0000:05:00.0 eth0: RTL8168evl/8111evl at 0xffffc90001b74000, 94:de:80:2b:cb:bd, XID 0c900800 IRQ 31
[ 13.926388] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 13.929003] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[ 13.929051] sp5100_tco: PCI Vendor ID: 0x1002, Device ID: 0x4385, Revision ID: 0x42
[ 13.929053] sp5100_tco: I/O address 0x0cd6 already in use
[ 13.932815] snd_hda_intel 0000:02:00.1: Disabling MSI
[ 13.932825] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[ 13.935565] mousedev: PS/2 mouse device common for all mice
[ 13.936955] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 13.938368] media: Linux media interface: v0.10
[ 13.942246] Linux video capture interface: v2.00
[ 13.949068] gspca_main: v2.14.0 registered
[ 13.950262] gspca_main: sonixj-2.14.0 probing 0c45:613b
[ 13.952426] usb 9-2: 1:1: cannot get freq at ep 0x1
[ 13.960797] Adding 5242876k swap on /dev/sda2. Priority:-1 extents:1 across:5242876k SSFS
[ 13.960912] AVX version of gcm_enc/dec engaged.
[ 13.960915] AES CTR mode by8 optimization enabled
[ 13.961169] input: sonixj as /devices/pci0000:00/0000:00:12.0/usb8/8-2/input/input10
[ 13.962722] usbcore: registered new interface driver sonixj
[ 13.968655] usb 9-2: 1:2: cannot get freq at ep 0x1
[ 13.980424] usb 9-2: 2:1: cannot get freq at ep 0x82
[ 13.989641] usbcore: registered new interface driver snd-usb-audio
[ 13.991571] kvm: Nested Virtualization enabled
[ 13.991575] kvm: Nested Paging enabled
[ 13.997223] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 14.021073] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 14.025482] nvidia: module license 'NVIDIA' taints kernel.
[ 14.025486] Disabling lock debugging due to kernel taint
[ 14.036978] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=io+mem:owns=none
[ 14.036982] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 14.043117] microcode: CPU0: new patch_level=0x0600084f
[ 14.047881] microcode: CPU2: new patch_level=0x0600084f
[ 14.048671] vfio-pci 0000:01:00.0: enabling device (0000 -> 0003)
[ 14.048981] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:02:00.0 on minor 0
[ 14.048991] NVRM: The NVIDIA probe routine was not called for 1 device(s).
[ 14.048993] NVRM: This can occur when a driver such as:
NVRM: nouveau, rivafb, nvidiafb or rivatv
NVRM: was loaded and obtained ownership of the NVIDIA device(s).
[ 14.048995] NVRM: Try unloading the conflicting kernel module (and/or
NVRM: reconfigure your kernel without the conflicting
NVRM: driver(s)), then try loading the NVIDIA kernel module
NVRM: again.
[ 14.048998] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.98 Mon Sep 19 17:31:03 PDT 2016
[ 14.052633] microcode: CPU4: new patch_level=0x0600084f
[ 14.067463] microcode: CPU6: new patch_level=0x0600084f
[ 14.166644] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 14.172021] IPv6: ADDRCONF(NETDEV_UP): br0: link is not ready
[ 14.173048] br0: port 1(enp5s0) entered blocking state
[ 14.173058] br0: port 1(enp5s0) entered disabled state
[ 14.173112] device enp5s0 entered promiscuous mode
[ 14.290809] r8169 0000:05:00.0 enp5s0: link down
[ 14.290813] r8169 0000:05:00.0 enp5s0: link down
[ 14.290879] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 14.591017] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 14.612678] Ebtables v2.0 registered
[ 14.655809] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card0/input11
[ 14.658530] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card0/input12
[ 14.658779] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card0/input13
[ 14.658839] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:04.0/0000:02:00.1/sound/card0/input14
[ 14.784828] tun: Universal TUN/TAP device driver, 1.6
[ 14.784829] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[ 14.828769] virbr0: port 1(virbr0-nic) entered blocking state
[ 14.828772] virbr0: port 1(virbr0-nic) entered disabled state
[ 14.828896] device virbr0-nic entered promiscuous mode
[ 14.832905] virbr0: port 1(virbr0-nic) entered blocking state
[ 14.832906] virbr0: port 1(virbr0-nic) entered forwarding state
[ 14.944905] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[ 15.009437] NVRM: Your system is not currently configured to drive a VGA console
[ 15.009440] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 15.009442] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 15.009443] NVRM: drivers including, but not limited to, vesafb, may result in
[ 15.009444] NVRM: corruption and stability problems, and is not supported.
[ 15.021544] virbr0: port 1(virbr0-nic) entered disabled state
[ 17.064443] r8169 0000:05:00.0 enp5s0: link up
[ 17.064949] br0: port 1(enp5s0) entered blocking state
[ 17.064955] br0: port 1(enp5s0) entered forwarding state
[ 17.065052] IPv6: ADDRCONF(NETDEV_CHANGE): br0: link becomes readyEDIT 2: I've actually disabled SVM from the BIOS and it doesn't change anything on the OS level? Does it need some special configuration in Arch? Or could it be just a broken BIOS?
Last edited by andreigrig (2016-10-14 18:55:11)
Offline
#6 2016-10-16 00:50:15
- smudge
- Member
- Registered: 2011-03-20
- Posts: 158
Re: AMD IOMMU Dilemma
I think this in your dmesg:
[ 1.482552] iommu: Adding device 0000:00:00.0 to group 0
[ 1.482847] iommu: Adding device 0000:00:02.0 to group 1
[ 1.483139] iommu: Adding device 0000:00:04.0 to group 2
[ 1.483430] iommu: Adding device 0000:00:09.0 to group 3
[ 1.483720] iommu: Adding device 0000:00:11.0 to group 4
[ 1.484019] iommu: Adding device 0000:00:12.0 to group 5
[ 1.484031] iommu: Adding device 0000:00:12.2 to group 5
[ 1.484331] iommu: Adding device 0000:00:13.0 to group 6
[ 1.484343] iommu: Adding device 0000:00:13.2 to group 6
[ 1.484635] iommu: Adding device 0000:00:14.0 to group 7
[ 1.484925] iommu: Adding device 0000:00:14.3 to group 8
[ 1.485226] iommu: Adding device 0000:00:14.4 to group 9
[ 1.485517] iommu: Adding device 0000:00:14.5 to group 10
[ 1.485818] iommu: Adding device 0000:00:15.0 to group 11
[ 1.485832] iommu: Adding device 0000:00:15.1 to group 11
[ 1.486133] iommu: Adding device 0000:00:16.0 to group 12
[ 1.486146] iommu: Adding device 0000:00:16.2 to group 12
[ 1.486455] iommu: Adding device 0000:01:00.0 to group 13
[ 1.486474] iommu: Adding device 0000:01:00.1 to group 13
[ 1.486778] iommu: Adding device 0000:02:00.0 to group 14
[ 1.486796] iommu: Adding device 0000:02:00.1 to group 14
[ 1.487089] iommu: Adding device 0000:03:00.0 to group 15
[ 1.487097] iommu: Adding device 0000:04:06.0 to group 9
[ 1.487108] iommu: Adding device 0000:05:00.0 to group 11
[ 1.487118] iommu: Adding device 0000:06:00.0 to group 11
[ 1.559130] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[ 1.559131] AMD-Vi: Interrupt remapping enabled
[ 1.559208] AMD-Vi: Lazy IO/TLB flushing enabledmeans it's working and you don't need to worry about the iommu kernel parameters for the time being.
Offline
#7 2016-10-16 20:49:59
- Lone_Wolf
- Administrator
- From: Netherlands, Europe
- Registered: 2005-10-04
- Posts: 12,939
Re: AMD IOMMU Dilemma
Buggy motherboard or buggy Bios .
It seems Gigabyte distinguishes between 6 hardware revisions for the GA- 990FXA-UD3 : rev 1.0, 1.1 ,1.2 , 3.0, 4.0 and 4.1 .
andreigrig, which HW revision do you have and are you running latest bios for it ?
Last edited by Lone_Wolf (2016-10-16 20:51:56)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
clean chroot building not flexible enough ?
Try clean chroot manager by graysky
Offline
#8 2016-10-18 19:01:11
- andreigrig
- Member
- Registered: 2016-02-04
- Posts: 20
Re: AMD IOMMU Dilemma
I am having the 3.0. I have used for some time the FDk which was in a BETA state. But as of last week I have downgraded to the latest stable FC BIOS. Still no change. It seems to work though since I can pass through my VGA card. Not sure about the performance impact though.
Offline
Pages: 1