You are not logged in.
My computer ram is 64MB, pentium 2, 233MHZ.
And then I installing Arch linux, I install network (so is comand "links").
Then I in root type for example links http://vissarion.ru, for me write:
Error loading <...>:
Network is unreachable
With "nano" in "/etc/resolv.conf" I write:
search mshome
nameserver 192.168.0.1
But not work! That need make, that work network?
I write "pacman -S kde" (like say in http://www.kde.org/info/3.5.2.php) and for me write:
error: could not open sync database: extra
have yuo used --refresh yet?
For Windows XP and Windows 98 not need make nothing, that work network, because my computer connected to other computer, that connected to internet.
I think, that and in Arch Linux posible somehow very simple install network, but how?
Goodbye!
Offline
Did you find this wiki page?
Offline
I'm not sure I understand you correctly: did you already succesfully install Arch or not?
If you did, did you follow the install guide? It explains how to get networking working after the installation, together with a lot of other useful stuff.
A bus station is where a bus stops.
A train station is where a train stops.
On my desk I have a workstation.
Offline
your router/computer is not a nameserver.. make sure u install dhcpcd and that there are some external ip in resolv.conf
Darkstar:
Athlon 64 3500+ (OC ~2.49ghz)
Leadtek GeForce 6800 128mb (unlocked/OC)
Rosewill Value DDR400 1GB
WDC SE 80GB
NEC 3550 DVDRW DL 16X
Offline
seems like he is trying to setup a wireless network, which I have no expierence on
Offline
How do wxpect to use pacman -Sy without a working net connection??
Be yourself, because you are all that you can be
Offline
Vacant, I will be try.
Goodbye!
Offline
your router/computer is not a nameserver.. make sure u install dhcpcd and that there are some external ip in resolv.conf
My router is a nameserver (and DHCP server). It issues 10.*.*.* private IP addresses rather than 192.168.*.* and the router itself has an IP address of 10.0.0.2. It autodetects my ISP's name servers and just relays requests. So my /etc/resolv.conf specifies "nameserver 10.0.0.2". I thought all routers did this?
I don't use dhcpd either. Each PC has a fixed IP address as my router needs to forward ports for bittorrent to specific IP addresses.
Offline
russianpirate wrote:your router/computer is not a nameserver.. make sure u install dhcpcd and that there are some external ip in resolv.conf
My router is a nameserver (and DHCP server). It issues 10.*.*.* private IP addresses rather than 192.168.*.* and the router itself has an IP address of 10.0.0.2. It autodetects my ISP's name servers and just relays requests. So my /etc/resolv.conf specifies "nameserver 10.0.0.2". I thought all routers did this?
I don't use dhcpd either. Each PC has a fixed IP address as my router needs to forward ports for bittorrent to specific IP addresses.
nope, mine forwards mine on from my ISP
Offline
Take a look at the gateway-part in our /etc/rc.conf.
To enable the defaultgateway in your routing-table the routes-line has to look like this:
ROUTES=(gateway)
Normaly its
ROUTES=(!gateway)
which means that its unabled.
Cheers, Maikel
Offline
nope, mine forwards mine on from my ISP
What make and model is that?
I just googled "adsl router dns proxy" and the first two I looked at (vigor and netgear) offer the router's LAN IP as a DNS (DNS proxy). They're quite good makes AFAIK whereas my Origo ASR8400 (connexant-based) is cheap and cheerful but it does that too.
Offline
Did X11 need install that: pacman -S X11?
And that of KDE, Gnome or X11 better will works on my slow computer?
Goodbye!
Offline
In /etc/rc.conf file networking:
#
# -----------------------------------------------------------------------
# NETWORKING
# -----------------------------------------------------------------------
#
HOSTNAME="mshome"
#
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
#
# Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
#
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
#
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
#
#gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
#
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up
# - prefix an entry with a ! to disable it
#
# Network profiles are found in /etc/network-profiles
#
#NET_PROFILES=(main)
/etc/resolv.conf:
#
# /etc/resolv.conf
#
#search <yourdomain>
#nameserver <ip>
#search pittpa.adelphia.net
#nameserver 68.168.64.23
#nameserver 68.168.64.24
search mshome
nameserver 192.168.0.1
# End of file
Then write links http://google.com to me write:
Error loading http://google.com/:
No route to host
Goodbye!
Offline
You have:
lo="lo 10.0.1.253"
eth0="eth0 192.168.0.128 netmask 255.255.255.0 broadcast 192.168.0.255"
INTERFACES=(lo eth0="dhcp")
when it should be:
lo="lo 10.0.1.253"
eth0="dhcp"
INTERFACES=(lo eth0)
Offline
Your networking section is messed up.
This is my setup for a network with a speedtouch adsl router using dhcp
(i've removed all comments to make it clearer)
HOSTNAME="julius"
lo="lo 127.0.0.1"
eth0="dhcp"
INTERFACES=(lo eth0)
gateway="default gw 10.0.0.138"
ROUTES=(!gateway)
If i was using fixed ip-addresses with the same router, it would look like this :
HOSTNAME="julius"
lo="lo 127.0.0.1"
eth0="eth0 10.0.0.20 netmask 255.255.255.0 broadcast 10.0.0.255"
INTERFACES=(lo eth0)
gateway="default gw 10.0.0.138"
ROUTES=(gateway)
Disliking systemd intensely, but not satisfied with alternatives so focusing on taming systemd.
(A works at time B) && (time C > time B ) ≠ (A works at time C)
Offline
Did X11 need install that: pacman -S X11?
Try
pacman -S xorg
And that of KDE, Gnome or X11 better will works on my slow computer?
I'd suggest something slimmer : XFCE (more user friendly), IceWM (not so bad), Openbox/Fluxbox/*box (fast, productive, but need to get used with it), anything else.
Any ow WM/DE needs xorg (you call it X11) to work
Offline
My computer ram is 64MB, pentium 2, 233MHZ.
And then I installing Arch linux, I install network (so is comand "links").
Then I in root type for example links http://vissarion.ru, for me write:
Error loading <...>:
Network is unreachable
With "nano" in "/etc/resolv.conf" I write:
search mshome
nameserver 192.168.0.1
But not work! That need make, that work network?
I write "pacman -S kde" (like say in http://www.kde.org/info/3.5.2.php) and for me write:
error: could not open sync database: extra
have yuo used --refresh yet?
For Windows XP and Windows 98 not need make nothing, that work network, because my computer connected to other computer, that connected to internet.
I think, that and in Arch Linux posible somehow very simple install network, but how?
Since your computer ram is 64MB, I agree with the above post, you should use a slimmer Desktop manager, don't bother with KDE or gnome they'll just hog your ram while starting up and cause problems.
Offline
I restart computer and now work links.
I look in /etc/resolv.conf and see, that "search mshome.net".
Then I type "pacman -S kde" to me write:
error: could not open sync database: extra
have yuo used --refresh yet?
Goodbye!
Offline
pacman -Syu
Then do
man pacman
and read it carefully.
A bus station is where a bus stops.
A train station is where a train stops.
On my desk I have a workstation.
Offline
Torindan2,
How in Fluxbox goto Home directory? How browse with it hard drives?
Me need that be menu bar like in KDE or Gnome with links to programs and possible browesing hard drives, but not in windows write, to look for example directory with command "# dir".
Love for yuo!
X11 installed with error, then I try it install.
Thanks, thanks.
Goodbye!
Offline