[SOLVED] Samba autostart systemd

koshon · 2016-11-12 22:52:00

Can't work autostart nmbd smbd units on boot with system. But.. manualy work! In units i only added After=dhcpcd.service run-mount-koshon-0c062b0a-058a-4a8e-b2c8-d3129b619def1.mount
my journal

Nov 12 16:22:30 koshonnya2 samba[553]: [2016/11/12 16:22:30.303191,  0] ../source4/smbd/server.c:372(binary_smbd_main)
Nov 12 16:22:30 koshonnya2 samba[553]:   samba version 4.5.1 started.
Nov 12 16:22:30 koshonnya2 samba[553]:   Copyright Andrew Tridgell and the Samba Team 1992-2016
Nov 12 16:22:30 koshonnya2 systemd[1]: samba.service: PID file /var/run/samba.pid not readable (yet?) after start: No such file or directory
Nov 12 16:22:30 koshonnya2 systemd[1]: Started Samba AD Daemon.
Nov 12 16:22:30 koshonnya2 systemd[1]: Started Samba NetBIOS name server.
Nov 12 16:22:30 koshonnya2 nmbd[556]: [2016/11/12 16:22:30.333156,  0] ../lib/util/become_daemon.c:124(daemon_ready)
Nov 12 16:22:30 koshonnya2 nmbd[556]:   STATUS=daemon 'nmbd' finished starting up and ready to serve connections
Nov 12 16:22:30 koshonnya2 systemd[1]: Starting Samba SMB/CIFS server...
Nov 12 16:22:30 koshonnya2 dhcpcd[284]: enp0s20u3: DHCPv6 REPLY: Not On Link
Nov 12 16:22:30 koshonnya2 dhcpcd[284]: enp0s20u3: soliciting a DHCPv6 lease
Nov 12 16:22:30 koshonnya2 minidlnad[554]: minidlna.c:1022: warn: Starting MiniDLNA version 1.1.6.
Nov 12 16:22:30 koshonnya2 minidlnad[554]: sql.c:41: error: SQL ERROR 8 [attempt to write a readonly database]
Nov 12 16:22:30 koshonnya2 minidlnad[554]: pragma default_cache_size = 8192;
Nov 12 16:22:30 koshonnya2 minidlnad[554]: minidlna.c:1062: warn: HTTP listening on port 8200
Nov 12 16:22:30 koshonnya2 minidlnad[554]: inotify.c:199: warn: WARNING: Inotify max_user_watches [8192] is low or close to the number of used watches [4] and I do not have permission to increase this limit.  Please do so manually by writing a higher value into /proc/sys/fs/inotify/max_user_watches.
Nov 12 16:22:30 koshonnya2 samba[555]: [2016/11/12 16:22:30.686396,  0] ../source4/smbd/server.c:466(binary_smbd_main)
Nov 12 16:22:30 koshonnya2 samba[555]:   At this time the 'samba' binary should only be used for either:
Nov 12 16:22:30 koshonnya2 samba[555]:   'server role = active directory domain controller' or to access the ntvfs file server with 'server services = +smb' or the rpc proxy with 'dcerpc endpoint servers = remote'
Nov 12 16:22:30 koshonnya2 samba[555]:   You should start smbd/nmbd/winbindd instead for domain member and standalone file server tasks
Nov 12 16:22:30 koshonnya2 samba[555]: [2016/11/12 16:22:30.686872,  0] ../lib/util/become_daemon.c:111(exit_daemon)
Nov 12 16:22:30 koshonnya2 samba[555]:   STATUS=daemon failed to start: Samba detected misconfigured 'server role' and exited. Check logs for details, error code 22
Nov 12 16:22:30 koshonnya2 systemd[1]: Started Samba SMB/CIFS server.
Nov 12 16:22:30 koshonnya2 systemd[1]: Reached target Multi-User System.
Nov 12 16:22:30 koshonnya2 systemd[1]: Reached target Graphical Interface.
Nov 12 16:22:30 koshonnya2 systemd[1]: Startup finished in 1.903s (kernel) + 5.231s (userspace) = 20.314s.
Nov 12 16:22:30 koshonnya2 systemd[1]: samba.service: Main process exited, code=exited, status=1/FAILURE
Nov 12 16:22:30 koshonnya2 systemd[1]: samba.service: Unit entered failed state.
Nov 12 16:22:30 koshonnya2 systemd[1]: samba.service: Failed with result 'exit-code'.
Nov 12 16:22:30 koshonnya2 smbd[559]: [2016/11/12 16:22:30.819529,  0] ../lib/util/become_daemon.c:124(daemon_ready)
Nov 12 16:22:30 koshonnya2 smbd[559]:   STATUS=daemon 'smbd' finished starting up and ready to serve connections
Nov 12 16:22:30 koshonnya2 smbd[559]: [2016/11/12 16:22:30.827736,  0] ../source3/smbd/server.c:1080(smbd_open_one_socket)
Nov 12 16:22:30 koshonnya2 smbd[559]:   smbd_open_one_socket: open_socket_in: Cannot assign requested address
Nov 12 16:22:30 koshonnya2 smbd[559]: [2016/11/12 16:22:30.828346,  0] ../source3/smbd/server.c:1080(smbd_open_one_socket)*
Nov 12 16:22:30 koshonnya2 smbd[559]:   smbd_open_one_socket: open_socket_in: Cannot assign requested address

What da sh.. this server role? I tried standalone, active directory domain controller, server services = +smb, but nothing.

smb.conf

#======================= Global Settings =====================================
[global]

server role = auto #standalone
server services = +smb

# workgroup = NT-Domain-Name or Workgroup-Name
   workgroup = 73

# server string is the equivalent of the NT Description field
   server string = koshonnya2

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
#   printcap name = /etc/printcap
#   load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx
;   printing = bsd
;   printcap name = /dev/null
;   disable spoolss = yes

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/%m.log

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Security mode. Most people will want user level security. See
# security_level.txt for details.
   security = user
#    security = share
map to guest = Bad User
#map to guest = Bad Password
interfaces = lo enp0s20u3
bind interfaces only = true

# Use password server option only with security = server
;   password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
;  username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
  encrypt passwords = yes
  smb passwd file = /etc/samba/smbpasswd

# The following are needed to allow password changing from Windows to
# update the Linux sytsem password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
#        the encrypted SMB passwords. They allow the Unix password
#        to be kept in sync with the SMB password.
;  unix password sync = Yes
;  passwd program = /usr/bin/passwd %u
;  passwd chat = *New*UNIX*password* %n\n *ReType*new*UNIX*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*

# Unix users can map to different SMB User names
;  username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /etc/samba/smb.conf.%m

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Configure remote browse list synchronisation here
#  request announcement to, or browse list sync from:
#	a specific host or from / to a whole subnet (see below)
;   remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
;   remote announce = 192.168.1.255 192.168.2.44

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Use only if you have an NT server on your network that has been
# configured at install time to be a primary domain controller.
;   domain controller = <NT-Domain-Controller-SMBName>

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# All NetBIOS names must be resolved to IP Addresses
# 'Name Resolve Order' allows the named resolution mechanism to be specified
# the default order is "host lmhosts wins bcast". "host" means use the unix
# system gethostbyname() function call that will use either /etc/hosts OR
# DNS or NIS depending on the settings of /etc/host.config, /etc/nsswitch.conf
# and the /etc/resolv.conf file. "host" therefore is system configuration
# dependant. This parameter is most often of use to prevent DNS lookups
# in order to resolve NetBIOS names to IP Addresses. Use with care!
# The example below excludes use of name resolution for machines that are NOT
# on the local network segment
# - OR - are not deliberately to be known via lmhosts or via WINS.
; name resolve order = wins lmhosts bcast

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#	Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one	WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
   dns proxy = no 

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
;  preserve case = no
;  short preserve case = no
# Default case is normally upper case for all DOS files
;  default case = lower
# Be very careful with case sensitivity - it can break things!
;  case sensitive = no

#============================ Share Definitions ==============================
#[homes]
#   comment = Home Directories
#   browseable = no
#   writable = yes
#valid users = %S

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /home/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /home/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
[printers]
   comment = All Printers
   path = /var/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group or user
[public]
   comment = Public Stuff
   path = /run/media/koshon/0c062b0a-058a-4a8e-b2c8-d3129b619def1
   public = yes
   read only = yes
   write list = Koshon
   printable = no
   guest ok = yes
#   guest account = pcguest

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes


# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %u option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765

Last edited by koshon (2016-11-12 23:49:40)

graysky · 2016-11-12 22:55:31

https://wiki.archlinux.org/index.php/Sa … g_services

?

koshon · 2016-11-12 23:28:45

graysky. Kill me.. i do not immediately saw the Tip: Instead of having the service running since boot, you can enable smbd.socket so the daemon is started on the first incoming connection. Do not forget to disable smbd.service.

graysky · 2016-11-12 23:43:45

No need for anyone to die Did that solve your problem?

koshon · 2016-11-12 23:49:19

graysky, yes, it solved

Arch Linux

#1 2016-11-12 22:52:00

[SOLVED] Samba autostart systemd

#2 2016-11-12 22:55:31

Re: [SOLVED] Samba autostart systemd

#3 2016-11-12 23:28:45

Re: [SOLVED] Samba autostart systemd

#4 2016-11-12 23:43:45

Re: [SOLVED] Samba autostart systemd

#5 2016-11-12 23:49:19

Re: [SOLVED] Samba autostart systemd

Board footer