You are not logged in.
Pages: 1
Hi. I need a help to configure my webcam's microphone, when I start PC, it doesn't work, when I reinsert USB, it works, but I need to wait few seconds of even minute, PulseAudio or ALSA is lagging when I insert Webcam's USB (sound doesn't work at all while PulseAudio or ALSA is lagging) and when I restart PC it stops working again, this is so annoying.
Offline
When I start PC:
When I reinsert USB (it may show Analog Mono Input and will work):
Last edited by D.Mon (2016-11-13 15:24:04)
Offline
and you can't switch to the correct profile without reconnecting? Attach the output of dmesg via some pastebin website, and the outputs of
pacmd list-cards
pacmd list-sources
and please post thumbnails or image links instead of fullsized pictures (they are relatively unnecessary though, since we will get the same and much more potential information from the pacmd outputs)
Offline
[leo@arch ~]$ pacmd list-cards
3 card(s) available.
index: 0
name: <alsa_card.pci-0000_00_01.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "1"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfeb64000 irq 43"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:01.1"
sysfs.path = "/devices/pci0000:00/0000:00:01.1/sound/card1"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "1308"
device.product.name = "Kaveri HDMI/DP Audio Controller"
device.form_factor = "internal"
device.string = "1"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <off>
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 2
name: <alsa_card.pci-0000_00_14.2>
driver: <module-alsa-card.c>
owner module: 8
properties:
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfeb60000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card2"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "780d"
device.product.name = "FCH Azalia Controller"
device.form_factor = "internal"
device.string = "2"
device.description = "Built-in Audio"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_00_14.2.analog-stereo/#1: Built-in Audio Analog Stereo
sources:
alsa_output.pci-0000_00_14.2.analog-stereo.monitor/#2: Monitor of Built-in Audio Analog Stereo
alsa_input.pci-0000_00_14.2.analog-stereo/#9: Built-in Audio Analog Stereo
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
analog-output-lineout: Line Out (priority 9900, latency offset 0 usec, available: yes)
properties:
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-headphones"
index: 6
name: <alsa_card.usb-Aveotek_GEMIX_WEBCAM_USB_AUDIO-02>
driver: <module-alsa-card.c>
owner module: 30
properties:
alsa.card = "0"
alsa.card_name = "GEMIX WEBCAM USB AUDIO"
alsa.long_card_name = "Aveotek GEMIX WEBCAM USB AUDIO at usb-0000:00:12.2-2, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:12.2-usb-0:2:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.2/sound/card0"
udev.id = "usb-Aveotek_GEMIX_WEBCAM_USB_AUDIO-02"
device.bus = "usb"
device.vendor.id = "1871"
device.vendor.name = "Aveo Technology Corp."
device.product.id = "0149"
device.product.name = "GEMIX WEBCAM USB AUDIO"
device.serial = "Aveotek_GEMIX_WEBCAM_USB_AUDIO"
device.form_factor = "webcam"
device.string = "0"
device.description = "GEMIX WEBCAM USB AUDIO"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
profiles:
input:multichannel-input: Multichannel Input (priority 1, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <input:multichannel-input>
sources:
alsa_input.usb-Aveotek_GEMIX_WEBCAM_USB_AUDIO-02.multichannel-input/#8: GEMIX WEBCAM USB AUDIO Multichannel
ports:
multichannel-input: Multichannel Input (priority 0, latency offset 0 usec, available: unknown)
properties:
[leo@arch ~]$ pacmd list-sources
3 source(s) available.
index: 2
name: <alsa_output.pci-0000_00_14.2.analog-stereo.monitor>
driver: <module-alsa-card.c>
flags: DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: IDLE
suspend cause:
priority: 1950
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 344 KiB
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 1999.82 ms; range is 0.50 .. 1999.82 ms
monitor_of: 1
card: 2 <alsa_card.pci-0000_00_14.2>
module: 8
properties:
device.description = "Monitor of Built-in Audio Analog Stereo"
device.class = "monitor"
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfeb60000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card2"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "780d"
device.product.name = "FCH Azalia Controller"
device.form_factor = "internal"
device.string = "2"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
index: 8
name: <alsa_input.usb-Aveotek_GEMIX_WEBCAM_USB_AUDIO-02.multichannel-input>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9040
volume: mono: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 1ch 48000Hz
channel map: mono
Mono
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 2000.00 ms
card: 6 <alsa_card.usb-Aveotek_GEMIX_WEBCAM_USB_AUDIO-02>
module: 30
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "USB Audio"
alsa.id = "USB Audio"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "GEMIX WEBCAM USB AUDIO"
alsa.long_card_name = "Aveotek GEMIX WEBCAM USB AUDIO at usb-0000:00:12.2-2, high speed"
alsa.driver_name = "snd_usb_audio"
device.bus_path = "pci-0000:00:12.2-usb-0:2:1.2"
sysfs.path = "/devices/pci0000:00/0000:00:12.2/usb1/1-2/1-2:1.2/sound/card0"
udev.id = "usb-Aveotek_GEMIX_WEBCAM_USB_AUDIO-02"
device.bus = "usb"
device.vendor.id = "1871"
device.vendor.name = "Aveo Technology Corp."
device.product.id = "0149"
device.product.name = "GEMIX WEBCAM USB AUDIO"
device.serial = "Aveotek_GEMIX_WEBCAM_USB_AUDIO"
device.form_factor = "webcam"
device.string = "hw:0"
device.buffering.buffer_size = "192000"
device.buffering.fragment_size = "96000"
device.access_mode = "mmap+timer"
device.profile.name = "multichannel-input"
device.profile.description = "Multichannel"
device.description = "GEMIX WEBCAM USB AUDIO Multichannel"
alsa.mixer_name = "USB Mixer"
alsa.components = "USB1871:0149"
module-udev-detect.discovered = "1"
device.icon_name = "camera-web-usb"
ports:
multichannel-input: Multichannel Input (priority 0, latency offset 0 usec, available: unknown)
properties:
active port: <multichannel-input>
* index: 9
name: <alsa_input.pci-0000_00_14.2.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9959
volume: front-left: 24672 / 38% / -25.46 dB, front-right: 24672 / 38% / -25.46 dB
balance 0.00
base volume: 6554 / 10% / -60.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max rewind: 0 KiB
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1837.33 ms
card: 2 <alsa_card.pci-0000_00_14.2>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "ALC887-VD Analog"
alsa.id = "ALC887-VD Analog"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "2"
alsa.card_name = "HD-Audio Generic"
alsa.long_card_name = "HD-Audio Generic at 0xfeb60000 irq 16"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:00:14.2"
sysfs.path = "/devices/pci0000:00/0000:00:14.2/sound/card2"
device.bus = "pci"
device.vendor.id = "1022"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD]"
device.product.id = "780d"
device.product.name = "FCH Azalia Controller"
device.form_factor = "internal"
device.string = "front:2"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "Built-in Audio Analog Stereo"
alsa.mixer_name = "Realtek ALC887-VD"
alsa.components = "HDA:10ec0887,1462d721,00100302"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: no)
properties:
device.icon_name = "audio-input-microphone"
analog-input-rear-mic: Rear Microphone (priority 8200, latency offset 0 usec, available: yes)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: no)
properties:
active port: <analog-input-front-mic>
[leo@arch ~]$
Offline
Pages: 1