You are not logged in.
Hi,
I am trying to configure a dual monitor setup with a FHD (1920x1080) (DP1) external monitor using VGA cable and Laptop Monitor (eDP1) (HiDpi 3200x1800). I have used the following command to scale the hidpi with xrandr. I have an intel and nvidia graphic card.
xrandr --output eDP1 --auto --output DP1 --auto --panning 3840x2160+3200+0 --scale 2x2 --right-of eDP1 --dpi 276
However after sometime (around 10-20 minutes) the X server Crashes and returns to the login screen.
The display works fine without the scale option so I don't think its a hardware issue
xrandr --output eDP1 --mode 3200x1800 --output DP1 --mode 1920x1080 --right-of eDP1
But then the font and icons on the external monitor is too big.
I have tried disabling bumblebee in case it was an issue with the nvidia card.
The Xserver log file
[ 16.177]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[ 16.177] X Protocol Version 11, Revision 0
[ 16.177] Build Operating System: Linux 4.8.14-1-ARCH x86_64
[ 16.177] Current Operating System: Linux mayukuse24 4.8.13-1-ARCH #1 SMP PREEMPT Fri Dec 9 07:24:34 CET 2016 x86_64
[ 16.177] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b3faade5-d577-4176-9fdd-b0a6a6cf584e rw quiet
[ 16.177] Build Date: 12 January 2017 07:11:40AM
[ 16.177]
[ 16.177] Current version of pixman: 0.34.0
[ 16.177] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 16.177] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 16.178] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jan 21 18:16:06 2017
[ 16.180] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 16.180] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 16.181] (==) No Layout section. Using the first Screen section.
[ 16.181] (==) No screen section available. Using defaults.
[ 16.181] (**) |-->Screen "Default Screen Section" (0)
[ 16.181] (**) | |-->Monitor "<default monitor>"
[ 16.182] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 16.182] (**) | |-->Device "card0"
[ 16.182] (**) | |-->GPUDevice "Intel Graphics"
[ 16.182] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 16.182] (==) Automatically adding devices
[ 16.182] (==) Automatically enabling devices
[ 16.182] (==) Automatically adding GPU devices
[ 16.182] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 16.184] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
[ 16.184] Entry deleted from font path.
[ 16.184] (Run 'mkfontdir' on "/usr/share/fonts/Type1/").
[ 16.184] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 16.184] Entry deleted from font path.
[ 16.184] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 16.185] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 16.185] Entry deleted from font path.
[ 16.185] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 16.185] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 16.185] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 16.185] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 16.185] (II) Loader magic: 0x821d60
[ 16.185] (II) Module ABI versions:
[ 16.185] X.Org ANSI C Emulation: 0.4
[ 16.185] X.Org Video Driver: 23.0
[ 16.185] X.Org XInput driver : 24.1
[ 16.185] X.Org Server Extension : 10.0
[ 16.186] (++) using VT number 1
[ 16.186] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 16.190] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 16.191] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 16.191] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 16.193] (--) PCI:*(0:0:2:0) 8086:1916:1043:1b1d rev 7, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 16.193] (--) PCI: (0:1:0:0) 10de:1347:1043:1b1d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 16.194] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 16.194] (II) LoadModule: "glx"
[ 16.196] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 16.206] (II) Module glx: vendor="X.Org Foundation"
[ 16.206] compiled for 1.19.1, module version = 1.0.0
[ 16.206] ABI class: X.Org Server Extension, version 10.0
[ 16.206] (II) LoadModule: "intel"
[ 16.206] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 16.210] (II) Module intel: vendor="X.Org Foundation"
[ 16.210] compiled for 1.19.0, module version = 2.99.917
[ 16.210] Module class: X.Org Video Driver
[ 16.210] ABI class: X.Org Video Driver, version 23.0
[ 16.210] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 16.210] (II) intel: Driver for Intel(R) HD Graphics
[ 16.210] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 16.210] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 16.211] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160711
[ 16.211] (II) intel(0): SNA compiled from 2.99.917-747-g028c946d
[ 16.213] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 520
[ 16.213] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[ 16.213] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 16.214] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 16.214] (==) intel(0): RGB weight 888
[ 16.214] (==) intel(0): Default visual is TrueColor
[ 16.214] (**) intel(0): Option "Backlight" "intel_backlight"
[ 16.214] (II) intel(0): Output eDP1 using monitor section eDP1
[ 16.215] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[ 16.215] (II) intel(0): Enabled output eDP1
[ 16.215] (II) intel(0): Output DP1 has no monitor section
[ 16.215] (II) intel(0): Enabled output DP1
[ 16.215] (II) intel(0): Output HDMI1 has no monitor section
[ 16.215] (II) intel(0): Enabled output HDMI1
[ 16.215] (II) intel(0): Output HDMI2 has no monitor section
[ 16.216] (II) intel(0): Enabled output HDMI2
[ 16.216] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 16.216] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 16.216] (II) intel(0): Enabled output VIRTUAL1
[ 16.216] (--) intel(0): Output eDP1 using initial mode 3200x1800 on pipe 0
[ 16.216] (--) intel(0): Output DP1 using initial mode 1920x1080 on pipe 1
[ 16.216] (==) intel(0): TearFree disabled
[ 16.216] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 16.216] (==) intel(0): DPI set to (96, 96)
[ 16.216] (II) Loading sub module "dri3"
[ 16.216] (II) LoadModule: "dri3"
[ 16.216] (II) Module "dri3" already built-in
[ 16.216] (II) Loading sub module "dri2"
[ 16.216] (II) LoadModule: "dri2"
[ 16.216] (II) Module "dri2" already built-in
[ 16.216] (II) Loading sub module "present"
[ 16.216] (II) LoadModule: "present"
[ 16.216] (II) Module "present" already built-in
[ 16.216] (==) Depth 24 pixmap format is 32 bpp
[ 16.220] (II) intel(0): SNA initialized with Skylake (gen9) backend
[ 16.220] (==) intel(0): Backing store enabled
[ 16.220] (==) intel(0): Silken mouse enabled
[ 16.220] (II) intel(0): HW Cursor enabled
[ 16.220] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 16.221] (==) intel(0): DPMS enabled
[ 16.222] (==) intel(0): Display hotplug detection enabled
[ 16.222] (II) intel(0): [DRI2] Setup complete
[ 16.222] (II) intel(0): [DRI2] DRI driver: i965
[ 16.222] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 16.222] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 16.222] (II) intel(0): hardware support for Present enabled
[ 16.222] (--) RandR disabled
[ 16.267] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 16.267] (II) AIGLX: enabled GLX_ARB_create_context
[ 16.267] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 16.267] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 16.267] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 16.267] (II) AIGLX: enabled GLX_SGI_swap_control
[ 16.267] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 16.267] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 16.267] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 16.267] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 16.267] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 16.267] (II) AIGLX: Loaded and initialized i965
[ 16.268] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 16.282] (II) intel(0): switch to mode 3200x1800@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 16.285] (II) intel(0): switch to mode 1920x1080@60.0 on DP1 using pipe 1, position (0, 0), rotation normal, reflection none
[ 16.288] (II) intel(0): Setting screen physical size to 290 x 170
[ 16.327] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 16.327] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 16.327] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 16.327] (II) LoadModule: "libinput"
[ 16.327] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 16.331] (II) Module libinput: vendor="X.Org Foundation"
[ 16.331] compiled for 1.19.0, module version = 0.23.0
[ 16.331] Module class: X.Org XInput Driver
[ 16.331] ABI class: X.Org XInput driver, version 24.1
[ 16.331] (II) Using input driver 'libinput' for 'Power Button'
[ 16.331] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0
[ 16.331] (**) Power Button: always reports core events
[ 16.331] (**) Option "Device" "/dev/input/event3"
[ 16.331] (**) Option "_source" "server/udev"
[ 16.332] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 16.332] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 16.332] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 16.332] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 16.332] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 16.332] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 16.332] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event4)
[ 16.332] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[ 16.332] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[ 16.332] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[ 16.333] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 27 paused 0
[ 16.333] (**) Asus Wireless Radio Control: always reports core events
[ 16.333] (**) Option "Device" "/dev/input/event4"
[ 16.333] (**) Option "_source" "server/udev"
[ 16.333] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[ 16.333] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[ 16.333] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input8/event4"
[ 16.333] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[ 16.333] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is tagged by udev as: Keyboard
[ 16.333] (II) input device 'Asus Wireless Radio Control', /dev/input/event4 is a keyboard
[ 16.333] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 16.333] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.333] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 16.333] (II) Using input driver 'libinput' for 'Video Bus'
[ 16.334] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 28 paused 0
[ 16.334] (**) Video Bus: always reports core events
[ 16.334] (**) Option "Device" "/dev/input/event7"
[ 16.334] (**) Option "_source" "server/udev"
[ 16.334] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[ 16.334] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[ 16.334] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input14/event7"
[ 16.334] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 16.334] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[ 16.334] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[ 16.334] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 16.334] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 16.334] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 16.334] (II) Using input driver 'libinput' for 'Video Bus'
[ 16.335] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 29 paused 0
[ 16.335] (**) Video Bus: always reports core events
[ 16.335] (**) Option "Device" "/dev/input/event8"
[ 16.335] (**) Option "_source" "server/udev"
[ 16.335] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 16.335] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 16.335] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:22/LNXVIDEO:01/input/input15/event8"
[ 16.335] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[ 16.335] (II) input device 'Video Bus', /dev/input/event8 is tagged by udev as: Keyboard
[ 16.335] (II) input device 'Video Bus', /dev/input/event8 is a keyboard
[ 16.335] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 16.335] (II) No input driver specified, ignoring this device.
[ 16.335] (II) This device may have been added with another device file.
[ 16.336] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 16.336] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 16.336] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 16.336] (II) Using input driver 'libinput' for 'Sleep Button'
[ 16.336] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[ 16.336] (**) Sleep Button: always reports core events
[ 16.336] (**) Option "Device" "/dev/input/event2"
[ 16.336] (**) Option "_source" "server/udev"
[ 16.336] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 16.336] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 16.336] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 16.336] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[ 16.336] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 16.336] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 16.337] (II) config/udev: Adding input device La-VIEW Technology SteelSeries Sensei MLG (/dev/input/event17)
[ 16.337] (**) La-VIEW Technology SteelSeries Sensei MLG: Applying InputClass "evdev pointer catchall"
[ 16.337] (**) La-VIEW Technology SteelSeries Sensei MLG: Applying InputClass "libinput pointer catchall"
[ 16.337] (II) Using input driver 'libinput' for 'La-VIEW Technology SteelSeries Sensei MLG'
[ 16.394] (II) systemd-logind: got fd for /dev/input/event17 13:81 fd 31 paused 0
[ 16.394] (**) La-VIEW Technology SteelSeries Sensei MLG: always reports core events
[ 16.394] (**) Option "Device" "/dev/input/event17"
[ 16.394] (**) Option "_source" "server/udev"
[ 16.395] (II) input device 'La-VIEW Technology SteelSeries Sensei MLG', /dev/input/event17 is tagged by udev as: Mouse
[ 16.395] (II) input device 'La-VIEW Technology SteelSeries Sensei MLG', /dev/input/event17 is a pointer caps
[ 16.395] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.0/0003:1038:136B.0001/input/input24/event17"
[ 16.395] (II) XINPUT: Adding extended input device "La-VIEW Technology SteelSeries Sensei MLG" (type: MOUSE, id 11)
[ 16.396] (**) Option "AccelerationScheme" "none"
[ 16.396] (**) La-VIEW Technology SteelSeries Sensei MLG: (accel) selected scheme none/0
[ 16.396] (**) La-VIEW Technology SteelSeries Sensei MLG: (accel) acceleration factor: 2.000
[ 16.396] (**) La-VIEW Technology SteelSeries Sensei MLG: (accel) acceleration threshold: 4
[ 16.397] (II) input device 'La-VIEW Technology SteelSeries Sensei MLG', /dev/input/event17 is tagged by udev as: Mouse
[ 16.397] (II) input device 'La-VIEW Technology SteelSeries Sensei MLG', /dev/input/event17 is a pointer caps
[ 16.399] (II) config/udev: Adding input device La-VIEW Technology SteelSeries Sensei MLG (/dev/input/mouse1)
[ 16.399] (II) No input driver specified, ignoring this device.
[ 16.399] (II) This device may have been added with another device file.
[ 16.400] (II) config/udev: Adding input device La-VIEW Technology SteelSeries Sensei MLG (/dev/input/event20)
[ 16.400] (**) La-VIEW Technology SteelSeries Sensei MLG: Applying InputClass "evdev keyboard catchall"
[ 16.400] (**) La-VIEW Technology SteelSeries Sensei MLG: Applying InputClass "libinput keyboard catchall"
[ 16.400] (II) Using input driver 'libinput' for 'La-VIEW Technology SteelSeries Sensei MLG'
[ 16.402] (II) systemd-logind: got fd for /dev/input/event20 13:84 fd 32 paused 0
[ 16.402] (**) La-VIEW Technology SteelSeries Sensei MLG: always reports core events
[ 16.402] (**) Option "Device" "/dev/input/event20"
[ 16.402] (**) Option "_source" "server/udev"
[ 16.403] (II) input device 'La-VIEW Technology SteelSeries Sensei MLG', /dev/input/event20 is tagged by udev as: Keyboard
[ 16.404] (II) input device 'La-VIEW Technology SteelSeries Sensei MLG', /dev/input/event20 is a keyboard
[ 16.404] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.2/1-3.2:1.1/0003:1038:136B.0002/input/input27/event20"
[ 16.404] (II) XINPUT: Adding extended input device "La-VIEW Technology SteelSeries Sensei MLG" (type: KEYBOARD, id 12)
[ 16.405] (II) input device 'La-VIEW Technology SteelSeries Sensei MLG', /dev/input/event20 is tagged by udev as: Keyboard
[ 16.405] (II) input device 'La-VIEW Technology SteelSeries Sensei MLG', /dev/input/event20 is a keyboard
[ 16.407] (II) config/udev: Adding input device ROCCAT ROCCAT Ryos MK Pro (/dev/input/event19)
[ 16.407] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "evdev keyboard catchall"
[ 16.407] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "libinput keyboard catchall"
[ 16.407] (II) Using input driver 'libinput' for 'ROCCAT ROCCAT Ryos MK Pro'
[ 16.409] (II) systemd-logind: got fd for /dev/input/event19 13:83 fd 33 paused 0
[ 16.409] (**) ROCCAT ROCCAT Ryos MK Pro: always reports core events
[ 16.409] (**) Option "Device" "/dev/input/event19"
[ 16.409] (**) Option "_source" "server/udev"
[ 16.410] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event19 is tagged by udev as: Keyboard
[ 16.410] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event19 is a keyboard
[ 16.410] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.0/0003:1E7D:3232.0005/input/input26/event19"
[ 16.411] (II) XINPUT: Adding extended input device "ROCCAT ROCCAT Ryos MK Pro" (type: KEYBOARD, id 13)
[ 16.412] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event19 is tagged by udev as: Keyboard
[ 16.412] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event19 is a keyboard
[ 16.414] (II) config/udev: Adding input device ROCCAT ROCCAT Ryos MK Pro (/dev/input/event21)
[ 16.414] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "evdev pointer catchall"
[ 16.414] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "evdev keyboard catchall"
[ 16.414] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "libinput pointer catchall"
[ 16.414] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "libinput keyboard catchall"
[ 16.414] (II) Using input driver 'libinput' for 'ROCCAT ROCCAT Ryos MK Pro'
[ 16.416] (II) systemd-logind: got fd for /dev/input/event21 13:85 fd 34 paused 0
[ 16.416] (**) ROCCAT ROCCAT Ryos MK Pro: always reports core events
[ 16.416] (**) Option "Device" "/dev/input/event21"
[ 16.416] (**) Option "_source" "server/udev"
[ 16.418] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event21 is tagged by udev as: Keyboard Mouse
[ 16.418] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event21 is a pointer caps
[ 16.418] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event21 is a keyboard
[ 16.418] (II) libinput: ROCCAT ROCCAT Ryos MK Pro: needs a virtual subdevice
[ 16.418] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:1E7D:3232.0006/input/input28/event21"
[ 16.418] (II) XINPUT: Adding extended input device "ROCCAT ROCCAT Ryos MK Pro" (type: MOUSE, id 14)
[ 16.418] (**) Option "AccelerationScheme" "none"
[ 16.418] (**) ROCCAT ROCCAT Ryos MK Pro: (accel) selected scheme none/0
[ 16.418] (**) ROCCAT ROCCAT Ryos MK Pro: (accel) acceleration factor: 2.000
[ 16.418] (**) ROCCAT ROCCAT Ryos MK Pro: (accel) acceleration threshold: 4
[ 16.420] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event21 is tagged by udev as: Keyboard Mouse
[ 16.420] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event21 is a pointer caps
[ 16.420] (II) input device 'ROCCAT ROCCAT Ryos MK Pro', /dev/input/event21 is a keyboard
[ 16.421] (II) config/udev: Adding input device ROCCAT ROCCAT Ryos MK Pro (/dev/input/mouse3)
[ 16.421] (II) No input driver specified, ignoring this device.
[ 16.421] (II) This device may have been added with another device file.
[ 16.423] (II) config/udev: Adding input device USB2.0 HD UVC WebCam (/dev/input/event16)
[ 16.423] (**) USB2.0 HD UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 16.423] (**) USB2.0 HD UVC WebCam: Applying InputClass "libinput keyboard catchall"
[ 16.423] (II) Using input driver 'libinput' for 'USB2.0 HD UVC WebCam'
[ 16.424] (II) systemd-logind: got fd for /dev/input/event16 13:80 fd 35 paused 0
[ 16.424] (**) USB2.0 HD UVC WebCam: always reports core events
[ 16.424] (**) Option "Device" "/dev/input/event16"
[ 16.424] (**) Option "_source" "server/udev"
[ 16.426] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event16 is tagged by udev as: Keyboard
[ 16.426] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event16 is a keyboard
[ 16.426] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input23/event16"
[ 16.426] (II) XINPUT: Adding extended input device "USB2.0 HD UVC WebCam" (type: KEYBOARD, id 15)
[ 16.427] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event16 is tagged by udev as: Keyboard
[ 16.427] (II) input device 'USB2.0 HD UVC WebCam', /dev/input/event16 is a keyboard
[ 16.429] (II) config/udev: Adding input device Atmel (/dev/input/event18)
[ 16.429] (**) Atmel: Applying InputClass "evdev touchscreen catchall"
[ 16.429] (**) Atmel: Applying InputClass "libinput touchscreen catchall"
[ 16.429] (II) Using input driver 'libinput' for 'Atmel'
[ 16.487] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 36 paused 0
[ 16.487] (**) Atmel: always reports core events
[ 16.487] (**) Option "Device" "/dev/input/event18"
[ 16.487] (**) Option "_source" "server/udev"
[ 16.489] (II) input device 'Atmel', /dev/input/event18 is tagged by udev as: Touchscreen
[ 16.489] (II) input device 'Atmel', /dev/input/event18 is a touch device
[ 16.489] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.1/0003:03EB:8B0D.0004/input/input25/event18"
[ 16.489] (II) XINPUT: Adding extended input device "Atmel" (type: TOUCHSCREEN, id 16)
[ 16.489] (**) Option "AccelerationScheme" "none"
[ 16.489] (**) Atmel: (accel) selected scheme none/0
[ 16.489] (**) Atmel: (accel) acceleration factor: 2.000
[ 16.489] (**) Atmel: (accel) acceleration threshold: 4
[ 16.490] (II) input device 'Atmel', /dev/input/event18 is tagged by udev as: Touchscreen
[ 16.491] (II) input device 'Atmel', /dev/input/event18 is a touch device
[ 16.492] (II) config/udev: Adding input device Atmel (/dev/input/mouse2)
[ 16.492] (II) No input driver specified, ignoring this device.
[ 16.492] (II) This device may have been added with another device file.
[ 16.493] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 16.493] (II) No input driver specified, ignoring this device.
[ 16.493] (II) This device may have been added with another device file.
[ 16.494] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[ 16.494] (II) No input driver specified, ignoring this device.
[ 16.494] (II) This device may have been added with another device file.
[ 16.494] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event12)
[ 16.495] (II) No input driver specified, ignoring this device.
[ 16.495] (II) This device may have been added with another device file.
[ 16.495] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event13)
[ 16.495] (II) No input driver specified, ignoring this device.
[ 16.495] (II) This device may have been added with another device file.
[ 16.496] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event14)
[ 16.496] (II) No input driver specified, ignoring this device.
[ 16.496] (II) This device may have been added with another device file.
[ 16.497] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event15)
[ 16.497] (II) No input driver specified, ignoring this device.
[ 16.497] (II) This device may have been added with another device file.
[ 16.498] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event9)
[ 16.498] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 16.498] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[ 16.498] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[ 16.500] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 37 paused 0
[ 16.500] (**) Asus WMI hotkeys: always reports core events
[ 16.500] (**) Option "Device" "/dev/input/event9"
[ 16.500] (**) Option "_source" "server/udev"
[ 16.501] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[ 16.501] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[ 16.501] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input16/event9"
[ 16.501] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 17)
[ 16.503] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is tagged by udev as: Keyboard
[ 16.503] (II) input device 'Asus WMI hotkeys', /dev/input/event9 is a keyboard
[ 16.504] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 16.504] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 16.504] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 16.504] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 16.506] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 38 paused 0
[ 16.506] (**) AT Translated Set 2 keyboard: always reports core events
[ 16.506] (**) Option "Device" "/dev/input/event0"
[ 16.506] (**) Option "_source" "server/udev"
[ 16.507] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 16.507] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 16.507] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 16.507] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 18)
[ 16.508] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 16.508] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 16.509] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/event6)
[ 16.510] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 16.510] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 16.510] (II) Using input driver 'libinput' for 'FocalTechPS/2 FocalTech FocalTech Touchpad'
[ 16.511] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 39 paused 0
[ 16.511] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: always reports core events
[ 16.511] (**) Option "Device" "/dev/input/event6"
[ 16.511] (**) Option "_source" "server/udev"
[ 16.512] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event6 is tagged by udev as: Touchpad
[ 16.513] (II) FocalTechPS/2 FocalTech FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[ 16.513] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event6 is a touchpad
[ 16.513] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event6"
[ 16.513] (II) XINPUT: Adding extended input device "FocalTechPS/2 FocalTech FocalTech Touchpad" (type: TOUCHPAD, id 19)
[ 16.513] (**) Option "AccelerationScheme" "none"
[ 16.514] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) selected scheme none/0
[ 16.514] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration factor: 2.000
[ 16.514] (**) FocalTechPS/2 FocalTech FocalTech Touchpad: (accel) acceleration threshold: 4
[ 16.514] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event6 is tagged by udev as: Touchpad
[ 16.515] (II) FocalTechPS/2 FocalTech FocalTech Touchpad: no resolution or size hints, assuming a size of 69x50mm
[ 16.515] (II) input device 'FocalTechPS/2 FocalTech FocalTech Touchpad', /dev/input/event6 is a touchpad
[ 16.515] (II) config/udev: Adding input device FocalTechPS/2 FocalTech FocalTech Touchpad (/dev/input/mouse0)
[ 16.515] (II) No input driver specified, ignoring this device.
[ 16.516] (II) This device may have been added with another device file.
[ 16.516] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 16.516] (II) No input driver specified, ignoring this device.
[ 16.516] (II) This device may have been added with another device file.
[ 16.538] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "evdev pointer catchall"
[ 16.538] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "evdev keyboard catchall"
[ 16.538] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "libinput pointer catchall"
[ 16.538] (**) ROCCAT ROCCAT Ryos MK Pro: Applying InputClass "libinput keyboard catchall"
[ 16.538] (II) Using input driver 'libinput' for 'ROCCAT ROCCAT Ryos MK Pro'
[ 16.538] (II) systemd-logind: returning pre-existing fd for /dev/input/event21 13:85
[ 16.538] (**) ROCCAT ROCCAT Ryos MK Pro: always reports core events
[ 16.538] (**) Option "Device" "/dev/input/event21"
[ 16.538] (**) Option "_source" "_driver/libinput"
[ 16.538] (II) libinput: ROCCAT ROCCAT Ryos MK Pro: is a virtual subdevice
[ 16.539] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3.3/1-3.3:1.1/0003:1E7D:3232.0006/input/input28/event21"
[ 16.539] (II) XINPUT: Adding extended input device "ROCCAT ROCCAT Ryos MK Pro" (type: KEYBOARD, id 20)
[ 18.219] (II) intel(0): EDID vendor "SDC", prod id 14666
[ 18.219] (II) intel(0): Printing DDC gathered Modelines:
[ 18.219] (II) intel(0): Modeline "3200x1800"x0.0 361.31 3200 3248 3280 3316 1800 1802 1807 1816 -hsync -vsync (109.0 kHz eP)
[ 18.219] (II) intel(0): Modeline "3200x1800"x0.0 361.31 3200 3248 3280 3680 1800 1802 1807 2045 -hsync -vsync (98.2 kHz e)
[ 32.487] (**) Option "fd" "24"
[ 32.487] (**) Option "fd" "27"
[ 32.487] (**) Option "fd" "28"
[ 32.487] (**) Option "fd" "29"
[ 32.488] (**) Option "fd" "30"
[ 32.488] (**) Option "fd" "31"
[ 32.488] (**) Option "fd" "32"
[ 32.488] (**) Option "fd" "33"
[ 32.488] (**) Option "fd" "34"
[ 32.488] (**) Option "fd" "35"
[ 32.488] (**) Option "fd" "36"
[ 32.488] (**) Option "fd" "37"
[ 32.488] (**) Option "fd" "38"
[ 32.488] (**) Option "fd" "39"
[ 32.488] (**) Option "fd" "34"
[ 32.489] (II) UnloadModule: "libinput"
[ 32.489] (II) systemd-logind: not releasing fd for 13:85, still in use
[ 32.489] (II) UnloadModule: "libinput"
[ 32.489] (II) systemd-logind: releasing fd for 13:70
[ 32.527] (II) UnloadModule: "libinput"
[ 32.527] (II) systemd-logind: releasing fd for 13:64
[ 32.567] (II) UnloadModule: "libinput"
[ 32.567] (II) systemd-logind: releasing fd for 13:73
[ 32.586] (II) UnloadModule: "libinput"
[ 32.587] (II) systemd-logind: releasing fd for 13:82
[ 32.627] (II) UnloadModule: "libinput"
[ 32.627] (II) systemd-logind: releasing fd for 13:80
[ 32.666] (II) UnloadModule: "libinput"
[ 32.667] (II) systemd-logind: releasing fd for 13:85
[ 32.707] (II) UnloadModule: "libinput"
[ 32.707] (II) systemd-logind: releasing fd for 13:83
[ 32.747] (II) UnloadModule: "libinput"
[ 32.747] (II) systemd-logind: releasing fd for 13:84
[ 32.786] (II) UnloadModule: "libinput"
[ 32.787] (II) systemd-logind: releasing fd for 13:81
[ 32.826] (II) UnloadModule: "libinput"
[ 32.827] (II) systemd-logind: releasing fd for 13:66
[ 32.847] (II) UnloadModule: "libinput"
[ 32.847] (II) systemd-logind: releasing fd for 13:72
[ 32.867] (II) UnloadModule: "libinput"
[ 32.867] (II) systemd-logind: releasing fd for 13:71
[ 32.887] (II) UnloadModule: "libinput"
[ 32.887] (II) systemd-logind: releasing fd for 13:68
[ 32.907] (II) UnloadModule: "libinput"
[ 32.907] (II) systemd-logind: releasing fd for 13:67
[ 32.993] (II) Server terminated successfully (0). Closing log file.
Offline
Don't use the intel driver, it's mostly unmaintained and can have all sorts of issues with the new Xorg. Use the built-in modesetting driver instead (simply removing xf86-video-intel should be enough)
Offline
I removed the xf86-video-intel driver but startx fails with no device found and no screen found errors. I have removed 20-intel.conf also.
[ 1914.613]
X.Org X Server 1.19.1
Release Date: 2017-01-11
[ 1914.613] X Protocol Version 11, Revision 0
[ 1914.613] Build Operating System: Linux 4.8.14-1-ARCH x86_64
[ 1914.613] Current Operating System: Linux mayukuse24 4.8.13-1-ARCH #1 SMP PREEMPT Fri Dec 9 07:24:34 CET 2016 x86_64
[ 1914.613] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=b3faade5-d577-4176-9fdd-b0a6a6cf584e rw quiet
[ 1914.613] Build Date: 12 January 2017 07:11:40AM
[ 1914.613]
[ 1914.613] Current version of pixman: 0.34.0
[ 1914.613] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1914.613] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1914.614] (==) Log file: "/home/mayukuse/.local/share/xorg/Xorg.1.log", Time: Mon Jan 23 20:43:44 2017
[ 1914.614] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1914.614] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1914.614] (==) No Layout section. Using the first Screen section.
[ 1914.614] (==) No screen section available. Using defaults.
[ 1914.614] (**) |-->Screen "Default Screen Section" (0)
[ 1914.614] (**) | |-->Monitor "<default monitor>"
[ 1914.614] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1914.614] (**) | |-->Device "card0"
[ 1914.614] (**) | |-->GPUDevice "Intel Graphics"
[ 1914.614] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1914.614] (==) Automatically adding devices
[ 1914.614] (==) Automatically enabling devices
[ 1914.614] (==) Automatically adding GPU devices
[ 1914.614] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1914.614] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/Type1/".
[ 1914.614] Entry deleted from font path.
[ 1914.614] (Run 'mkfontdir' on "/usr/share/fonts/Type1/").
[ 1914.614] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1914.614] Entry deleted from font path.
[ 1914.614] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1914.614] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1914.614] Entry deleted from font path.
[ 1914.614] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1914.614] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/
[ 1914.614] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1914.614] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1914.614] (II) Loader magic: 0x821d60
[ 1914.614] (II) Module ABI versions:
[ 1914.614] X.Org ANSI C Emulation: 0.4
[ 1914.614] X.Org Video Driver: 23.0
[ 1914.614] X.Org XInput driver : 24.1
[ 1914.614] X.Org Server Extension : 10.0
[ 1914.615] (++) using VT number 1
[ 1914.615] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 1914.617] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 1914.617] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1914.618] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 1914.619] (--) PCI:*(0:0:2:0) 8086:1916:1043:1b1d rev 7, Mem @ 0xdd000000/16777216, 0xb0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[ 1914.619] (--) PCI: (0:1:0:0) 10de:1347:1043:1b1d rev 162, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 1914.619] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1914.619] (II) "glx" will be loaded by default.
[ 1914.619] (II) LoadModule: "modesetting"
[ 1914.619] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1914.619] (II) Module modesetting: vendor="X.Org Foundation"
[ 1914.619] compiled for 1.19.1, module version = 1.19.1
[ 1914.619] Module class: X.Org Video Driver
[ 1914.619] ABI class: X.Org Video Driver, version 23.0
[ 1914.619] (II) LoadModule: "glx"
[ 1914.620] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1914.620] (II) Module glx: vendor="X.Org Foundation"
[ 1914.620] compiled for 1.19.1, module version = 1.0.0
[ 1914.621] ABI class: X.Org Server Extension, version 10.0
[ 1914.621] (II) LoadModule: "intel"
[ 1914.621] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1914.621] (II) Module intel: vendor="X.Org Foundation"
[ 1914.621] compiled for 1.19.0, module version = 2.99.917
[ 1914.621] Module class: X.Org Video Driver
[ 1914.621] ABI class: X.Org Video Driver, version 23.0
[ 1914.621] (II) LoadModule: "modesetting"
[ 1914.621] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1914.621] (II) Module modesetting: vendor="X.Org Foundation"
[ 1914.621] compiled for 1.19.1, module version = 1.19.1
[ 1914.621] Module class: X.Org Video Driver
[ 1914.621] ABI class: X.Org Video Driver, version 23.0
[ 1914.621] (II) UnloadModule: "modesetting"
[ 1914.621] (II) Unloading modesetting
[ 1914.621] (II) Failed to load module "modesetting" (already loaded, 0)
[ 1914.621] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1914.621] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 1914.621] (II) intel: Driver for Intel(R) HD Graphics
[ 1914.621] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 1914.621] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 1914.621] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 1914.621] (II) modeset(G0): using drv /dev/dri/card0
[ 1914.621] (EE) No devices detected.
[ 1914.621] (EE)
Fatal server error:
[ 1914.621] (EE) no screens found(EE)
[ 1914.621] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 1914.621] (EE) Please also check the log file at "/home/mayukuse/.local/share/xorg/Xorg.1.log" for additional information.
[ 1914.621] (EE)
[ 1914.670] (EE) Server terminated with error (1). Closing log file.
Last edited by mayukuse (2017-01-23 15:32:27)
Offline
You still have the intel driver in that log. It should fail to load the intel module. How did you "remove" xf86-video-intel, which command did you use? Can you post your /var/log/pacman.log from a reasonable timeframe?
Offline
Nvm, I reduced the resolution of my HiDpi monitor display and then reduced the dpi to 144 for 1920x1080. It works fine now (without crashing) since I am no longer scaling the display.
I used sudo pacman -Rs xf86-video-intel to remove the intel driver. I am pretty sure it was removed since startx failed after that.
Last edited by mayukuse (2017-01-24 15:36:09)
Offline