ACPI Error: No handler for Region [RAM_]

Daerun · 2017-01-27 10:30:32

I'm not sure if this belongs here, or maybe in System Adm; I'm posting it here as it happened right after last kernel update yesterday. At bootup, I noticed the following error:

https://s19.postimg.org/nebtrwxwj/20170127_111011.jpg

It still boots normally and I can't find any problem whatsoever, but I wondered the reason for this.

r3b311i0n · 2017-01-27 10:52:42

I'm getting this error at boot after upgrading to the new 4.9.6 kernel. System boots up without any issues and everything seems to be working fine. From my understanding, this is a backlight related debug message. I would appreciate it if anyone can shed a bit more light on this issue.

system:

HP Envy 15
i7 4700-MQ
nvidia gt740m (using bumblebee)

https://s27.postimg.org/cu38q2tgj/Scree … _07_33.png

miba · 2017-01-27 12:11:58

I'm getting a similar error since the update to 4.9 but my system still boots.

[    2.056691] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    2.056754] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8802160c3230), AE_NOT_FOUND (20160831/psparse-543)
[    2.057122] ata2.00: ATA-8: ST500DM002-1BD142, KC45, max UDMA/133
[    2.057125] ata2.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.058028] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    2.058090] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff8802160c3320), AE_NOT_FOUND (20160831/psparse-543)
[    2.058176] ata1.00: ATAPI: ATAPI   iHAS124   C, LL02, max UDMA/100
[    2.058422] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    2.058480] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff8802160c3230), AE_NOT_FOUND (20160831/psparse-543)
[    2.058836] ata2.00: configured for UDMA/133
[    2.058970] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    2.059032] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff8802160c3320), AE_NOT_FOUND

I'm also additionally getting this error which I didn't get before:

[    0.220343] efi: requested map not found.
[    0.220347] efi: Failed to lookup EFI memory descriptor for 0x00000000df144018

I'm using GRUB as a bootloader.

System:
Intel Core i7 2600
Asus P8P67 Evo
AMD Radeon RX480 with open source drivers

r3b311i0n · 2017-01-27 12:53:23

miba wrote:

I'm using GRUB as a bootloader.

I'm using systemd-boot and I'm not getting any bootloader problems.

I'm wondering whether the acpi errors are previously suppressed errors being put forward.

For your grub error, perhaps take a look at this: https://forums.linuxmint.com/viewtopic.php?t=238220

Last edited by r3b311i0n (2017-01-27 12:56:00)

miba · 2017-01-27 13:21:24

I don't think I have the same issue as the user on that thread. I just looked at my fstab and everything looks correctly set up and even if it weren't it would be very weird that it just now starts throwing that error since I haven't changed my fstab since installing Arch. I also don't get a message regarding emergency mode, it boots up normally after that error message.

r3b311i0n wrote:

I'm wondering whether the acpi errors are previously suppressed errors being put forward.

Maybe, but I'd still rather report this weird new behavior before it becomes an issue.

ntldr · 2017-01-27 14:25:56

I also did the update and turned off PC to install new sata 3 cables to my HDDs and SSDs and DVD drive.

I also saw this error

[    1.536427] ata1.00: ATA-9: Samsung SSD 850 EVO 500GB, EMT02B6Q, max UDMA/133
[    1.536428] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    1.537102] ata1.00: supports DRM functions and may not be fully accessible
[    1.537548] ata3.00: configured for UDMA/133
[    1.537662] ata1.00: disabling queued TRIM support
[    1.537719] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.537745] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040e0e4bb8), AE_NOT_FOUND (20160831/psparse-543)                                                                                                                      
[    1.537781] ata6.00: ATAPI: ASUS     DRW-24F1ST   a, 1.00, max UDMA/100
[    1.538033] ata1.00: configured for UDMA/133
[    1.538210] scsi 0:0:0:0: Direct-Access     ATA      Samsung SSD 850  2B6Q PQ: 0 ANSI: 5
[    1.538817] ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
[    1.538842] ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT5._GTF] (Node ffff88040e0e4bb8), AE_NOT_FOUND (20160831/psparse-543)

tho I doubt the new cables are to blame I just didn't reboot with the olds so I didn't see the error..?

Glinx · 2017-01-27 17:24:09

Same errors as r3b311i0n after update today

grub
GA-Z77-DS3H
Nvidia 780ti (proprietary drivers)

EDIT:
After some googling it seems this isn't a new issue or one to be worried about. I found this page to suppress the messages https://wiki.archlinux.org/index.php/Silent_boot
I used "quiet loglevel=3" loglevel=4 seems to be the standard and loglevel=5 was just scary - several more errors showed themselves!

Last edited by Glinx (2017-01-27 18:10:58)

Daerun · 2017-01-27 20:26:34

Same problem here, just updated my PC and this error came out.

I posted a similar (yet different) error my laptop threw up this morning when updated. Not sure if it's related, I guess so:

https://bbs.archlinux.org/viewtopic.php?id=222409

mozo · 2017-01-27 21:47:10

Same errors here after update to 4.9.6-1 kernel.

loqs · 2017-01-27 23:44:10

The only difference I am seeing between 4.9.y and 4.8.x is that these errors messages now appear on the console as well as being logged to dmesg/journal.
For everyone else were these messages not present in the journal from pre upgrade boots?

SupKurtJ · 2017-01-28 00:48:24

Same errors

grub
Gigabyte GA-Z77X-D3H
Nvidia 970GTX (proprietary drivers)

Jan 27 19:19:06 corsair kernel: ACPI Error: DSSP Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 27 19:19:06 corsair kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF (Node ffff88040e0cf500), AE_NOT_FOUND (20160831/psparse-543)
Jan 27 19:19:06 corsair kernel: ACPI Error: DSSP Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 27 19:19:06 corsair kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF (Node ffff88040e0cf280), AE_NOT_FOUND (20160831/psparse-543)
Jan 27 19:19:06 corsair kernel: ACPI Error: DSSP Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 27 19:19:06 corsair kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT1._GTF (Node ffff88040e0cf280), AE_NOT_FOUND (20160831/psparse-543)
Jan 27 19:19:06 corsair kernel: ACPI Error: DSSP Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 27 19:19:06 corsair kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT0._GTF (Node ffff88040e0cf500), AE_NOT_FOUND (20160831/psparse-543)
Jan 27 19:19:06 corsair kernel: ACPI Error: DSSP Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 27 19:19:06 corsair kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF (Node ffff88040e0cf6b8), AE_NOT_FOUND (20160831/psparse-543)
Jan 27 19:19:06 corsair kernel: ACPI Error: DSSP Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 27 19:19:06 corsair kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.SAT0.SPT2._GTF (Node ffff88040e0cf6b8), AE_NOT_FOUND (20160831/psparse-543)

Last edited by SupKurtJ (2017-01-28 00:49:49)

r3b311i0n · 2017-01-28 01:32:24

loqs wrote:

The only difference I am seeing between 4.9.y and 4.8.x is that these errors messages now appear on the console as well as being logged to dmesg/journal.
For everyone else were these messages not present in the journal from pre upgrade boots?

I never saw them, but they could have easily been there. I agree with @Glinx conclusion; it seems like logging has been changed.

belldandy · 2017-01-28 02:04:35

same errors
G1840 + H97M-PLUS(2603) + grub

but
630 + GA-MA785GM-US2H(F11) + grub
work fine

Last edited by belldandy (2017-01-28 02:12:35)

forumache · 2017-01-28 07:23:24

@Glinx thank you for loglevel=3, it works.

On my computer I always had the errors, just that they were not displayed on console. As a practice, from time to time and always after updating kernel I run:

journalctl -b -p warning

to see warnings and errors or

journalctl -b -p err

to see only the errors.

With kernel 4.9, errors are displayed on console at the default loglevel.

Nothing to worry.

amhairghin · 2017-01-28 09:58:37

Hi!

I have simmilar issue in same date.

The interesting portion of journal.

ene 28 10:46:02 hell kernel: ACPI: Added _OSI(Module Device)
ene 28 10:46:02 hell kernel: ACPI: Added _OSI(Processor Device)
ene 28 10:46:02 hell kernel: ACPI: Added _OSI(3.0 _SCP Extensions)
ene 28 10:46:02 hell kernel: ACPI: Added _OSI(Processor Aggregator Device)
ene 28 10:46:02 hell kernel: ACPI: Interpreter enabled
ene 28 10:46:02 hell kernel: ACPI: (supports S0 S3 S4 S5)
ene 28 10:46:02 hell kernel: ACPI: Using IOAPIC for interrupt routing
ene 28 10:46:02 hell kernel: PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ene 28 10:46:02 hell kernel: ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
ene 28 10:46:02 hell kernel: acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ene 28 10:46:02 hell kernel: ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20160831/dsfield-211)
ene 28 10:46:02 hell kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0._OSC] (Node ffff880312ca77f8), AE_ALREADY_EXISTS (20160831/psparse-543)
ene 28 10:46:02 hell kernel: acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
ene 28 10:46:02 hell kernel: acpi PNP0A08:00: host bridge window expanded to [io  0x0000-0x03af window]; [io  0x0000-0x03af window] ignored

Seems a problem with ACPI, but I don't know why.

Zohran · 2017-01-28 12:36:52

Hello, i have the same issue... It reassures me, I think the problem came from me

WorMzy · 2017-01-28 12:53:03

Mod note: merging ACPI messages thread with similar thread.

newbie1962 · 2017-01-28 13:14:34

I have the same problem, but most will not start, so I had to go back to the 4.8.13 kernel
anyone know is there will be corrections or do I lock the kernel pacman.conf
thank you!

loqs · 2017-01-28 16:19:32

@Zohran and @newbie1962 your systems appear to be the only ones that can not boot post upgrade to 4.9.6
There is not enough information to know if the failure to boot is related to acpi.
Would suggest you start by trying adjusting Kernel_parameters, see kernel-parameters for full list of parameters. Initially would try "acpi=off" to disable the acpi subsystem if the system still fails to boot "loglevl=7" and remove the quiet parameter if it is present.
May also be useful to post the pacman.log of the update containing the kernel upgrade.
Edit:
Possibly a third none booting system https://bbs.archlinux.org/viewtopic.php?id=222427

Last edited by loqs (2017-01-28 16:40:56)

Batou · 2017-01-28 19:34:38

Same type of errors as the rest of you. I have an ASUS motherboard (if it matters)

Jan 28 13:31:59 batou kernel: ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 28 13:31:59 batou kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88040e0b22d0), AE_NOT_FOUND (20160831/psparse-543)
Jan 28 13:31:59 batou kernel: ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 28 13:31:59 batou kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff88040e0c6960), AE_NOT_FOUND (20160831/psparse-543)
Jan 28 13:31:59 batou kernel: ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 28 13:31:59 batou kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040e0c6320), AE_NOT_FOUND (20160831/psparse-543)
Jan 28 13:31:59 batou kernel: ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 28 13:31:59 batou kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT0._GTF] (Node ffff88040e0b22d0), AE_NOT_FOUND (20160831/psparse-543)
Jan 28 13:31:59 batou kernel: ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 28 13:31:59 batou kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT1._GTF] (Node ffff88040e0c6960), AE_NOT_FOUND (20160831/psparse-543)
Jan 28 13:31:59 batou kernel: ACPI Error: [DSSP] Namespace lookup failure, AE_NOT_FOUND (20160831/psargs-359)
Jan 28 13:31:59 batou kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.SAT0.SPT2._GTF] (Node ffff88040e0c6320), AE_NOT_FOUND (20160831/psparse-543)

System does boot, however.

Last edited by Batou (2017-01-28 19:36:53)

vitaliy.kuzmich · 2017-01-28 19:41:43

same
https://s24.postimg.org/bhuei4h8l/IMG_2 … 213152.jpg

Zohran · 2017-01-28 22:36:58

My PC can boot in gnome but i have this log:

janv. 28 23:26:12 msi-gs73-vr kernel: ACPI Error: No handler for Region [EC__] (ffff8804ae0e6ca8) [EmbeddedControl] (20160831/evregion-166)
janv. 28 23:26:12 msi-gs73-vr kernel: ACPI Error: Region EmbeddedControl (ID=3) has no handler (20160831/exfldio-299)
janv. 28 23:26:12 msi-gs73-vr kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.LPCB.EC._REG] (Node ffff8804ae0e7370), AE_NOT_EXIST (20160831/ps

jonno2002 · 2017-01-28 23:53:23

same thing here after todays kernel 4.9 upgrade, errors at boot but runs fine:

toshiba p50
4700mq

Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
Jan 29 12:42:49 jonnos kernel: atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS01._PLD] (Node ffff8802270e2fa0), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS02._PLD] (Node ffff8802270e2280), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS05._PLD] (Node ffff8802270e27f8), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS06._PLD] (Node ffff8802270e26e0), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS07._PLD] (Node ffff8802270e2f28), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS08._PLD] (Node ffff8802270e26b8), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS09._PLD] (Node ffff8802270e25a0), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS10._PLD] (Node ffff8802270e2e88), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS11._PLD] (Node ffff8802270e2398), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS12._PLD] (Node ffff8802270e2320), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS13._PLD] (Node ffff8802270e2758), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.HS14._PLD] (Node ffff8802270e22a8), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: xhci_hcd 0000:00:14.0: xHCI Host Controller
Jan 29 12:42:49 jonnos kernel: xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
Jan 29 12:42:49 jonnos kernel: hub 4-0:1.0: USB hub found
Jan 29 12:42:49 jonnos kernel: hub 4-0:1.0: 4 ports detected
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.SSP3._PLD] (Node ffff8802270e44d8), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Exception: AE_AML_PACKAGE_LIMIT, Index (0x000000008) is beyond end of object (length 0x1) (20160831/exoparg2-427)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.XPLD] (Node ffff8802270e4898), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)
Jan 29 12:42:49 jonnos kernel: ACPI Error: Method parse/execution failed [\_SB.PCI0.XHC.RHUB.SSP4._PLD] (Node ffff8802270e4b40), AE_AML_PACKAGE_LIMIT (20160831/psparse-543)

and my media laptop which is much older (toshiba a300, p7450) doesnt have these errors after the same update today.

EDIT: just did some digging around and sure enough the errors have always been there but the previous kernels just ignored them.

Last edited by jonno2002 (2017-01-29 01:57:49)

cb951303 · 2017-01-29 10:07:29

This error was already there in 4.8 hidden in dmesg, it's just that it's now printed to the terminal since 4.9.6
I've opened up a bug report in kernel bug tracker for this and for 4.10 or 4.11 there is already a patch. It doesn't seem to affect any functionality though.

Here is the bug report for interested people: https://bugzilla.kernel.org/show_bug.cgi?id=192501

Last edited by cb951303 (2017-01-29 10:07:50)

Daerun · 2017-01-29 14:47:04

So, that means this is nothing to worry about? As I said, I didn't notice anything wrong beyond those messages. Guess we'll have to learn to live with them.

Arch Linux

#1 2017-01-27 10:30:32

ACPI Error: No handler for Region [RAM_]

#2 2017-01-27 10:52:42

Re: ACPI Error: No handler for Region [RAM_]

#3 2017-01-27 12:11:58

Re: ACPI Error: No handler for Region [RAM_]

#4 2017-01-27 12:53:23

Re: ACPI Error: No handler for Region [RAM_]

#5 2017-01-27 13:21:24

Re: ACPI Error: No handler for Region [RAM_]

#6 2017-01-27 14:25:56

Re: ACPI Error: No handler for Region [RAM_]

#7 2017-01-27 17:24:09

Re: ACPI Error: No handler for Region [RAM_]

#8 2017-01-27 20:26:34

Re: ACPI Error: No handler for Region [RAM_]

#9 2017-01-27 21:47:10

Re: ACPI Error: No handler for Region [RAM_]

#10 2017-01-27 23:44:10

Re: ACPI Error: No handler for Region [RAM_]

#11 2017-01-28 00:48:24

Re: ACPI Error: No handler for Region [RAM_]

#12 2017-01-28 01:32:24

Re: ACPI Error: No handler for Region [RAM_]

#13 2017-01-28 02:04:35

Re: ACPI Error: No handler for Region [RAM_]

#14 2017-01-28 07:23:24

Re: ACPI Error: No handler for Region [RAM_]

#15 2017-01-28 09:58:37

Re: ACPI Error: No handler for Region [RAM_]

#16 2017-01-28 12:36:52

Re: ACPI Error: No handler for Region [RAM_]

#17 2017-01-28 12:53:03

Re: ACPI Error: No handler for Region [RAM_]

#18 2017-01-28 13:14:34

Re: ACPI Error: No handler for Region [RAM_]

#19 2017-01-28 16:19:32

Re: ACPI Error: No handler for Region [RAM_]

#20 2017-01-28 19:34:38

Re: ACPI Error: No handler for Region [RAM_]

#21 2017-01-28 19:41:43

Re: ACPI Error: No handler for Region [RAM_]

#22 2017-01-28 22:36:58

Re: ACPI Error: No handler for Region [RAM_]

#23 2017-01-28 23:53:23

Re: ACPI Error: No handler for Region [RAM_]

#24 2017-01-29 10:07:29

Re: ACPI Error: No handler for Region [RAM_]

#25 2017-01-29 14:47:04

Re: ACPI Error: No handler for Region [RAM_]

Board footer