You are not logged in.

#1 2017-02-22 17:54:49

Florian Rohm
Member
Registered: 2017-02-22
Posts: 4

OpenGL refusing to work with Quadro M500M on Lenovo P50s [SOLVED]

Greetings,
I want to fully enable my graphics card on my laptop, but fail.
Per default, the mesa drivers took care of everything, but ofc I did not have access to CUDA

What I did:
- installed cuda, nvidia nvidia-utils nvidia-libgl lib32-nvidia-utils lib32-nvidia-libgl lib32-mesa-demos libva-vdpau-driver
   (removed the mesa pendants for libgl)
-  systemctl enable nvidia-persistenced.service
-  reboot

The problem:
it seems like the card is active
- I can compile and run the cuda vectoradd sample
- nvidia nsight detects it on creating a new project
- display ("benchmarl": resizing floating window of intellij) seems more responsive

but I don't have opengl as
- compton will fail with glx_init(): No GLX extension.
- inxi -Gx outputs

Graphics:  Card-1: Intel HD Graphics 520 bus-ID: 00:02.0
           Card-2: NVIDIA GM108GLM [Quadro K620M / Quadro M500M] bus-ID: 06:00.0
           Display Server: X.Org 1.19.1 drivers: modesetting,nvidia (unloaded: vesa)
           Resolution: 2880x1620@59.96hz
           GLX Renderer: N/A GLX Version: N/A Direct Rendering: N/A

- glxinfo32 | grep OpenGL   

Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Error: couldn't find RGB GLX visual or fbconfig
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".
Xlib:  extension "GLX" missing on display ":0".

- vainfo

libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns -1
libva error: va_getDriverName() failed with unknown libva error,driver_name=(null)
vaInitialize failed with error code -1 (unknown libva error),exit

What I tried
- many reinstalls
- bumblebee (cuda was messy and I don't mind the card to be always on)
- 20-nvidia.conf which results in a non bootable state, like described here, but unfortunately without a solution
  (also with the startup script for my display manager LightDM as described here)
Packages are all completely updated.


I hope, someone can help me, or at least poke me in the right direction as I'm not an expert in this regime and slowly but surely out of ideas.

Greetings
Flo

Last edited by Florian Rohm (2017-02-23 21:49:12)

Offline

#2 2017-02-22 21:52:51

lordheavy
Developer
From: France
Registered: 2010-04-01
Posts: 291

Re: OpenGL refusing to work with Quadro M500M on Lenovo P50s [SOLVED]

Do you have any logs? especially xorg logs

Last edited by lordheavy (2017-02-22 21:53:31)

Offline

#3 2017-02-23 00:31:08

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 10,082

Re: OpenGL refusing to work with Quadro M500M on Lenovo P50s [SOLVED]

Just for the what I tried part: You are aware that only adjusting your lightdm conf will not be enough and you have to have xorg configuration as specified further up in that same article? But yeah logs  would be nice

Offline

#4 2017-02-23 07:45:18

Florian Rohm
Member
Registered: 2017-02-22
Posts: 4

Re: OpenGL refusing to work with Quadro M500M on Lenovo P50s [SOLVED]

Yeah, sorry, of course. Just saw the other thread with a very similar Problem which got posted while I was writing.

[     9.929] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[     9.929] X Protocol Version 11, Revision 0
[     9.929] Build Operating System: Linux 4.8.14-1-ARCH x86_64 
[     9.929] Current Operating System: Linux Flo-Lenovo-P50s 4.9.11-1-ARCH #1 SMP PREEMPT Sun Feb 19 13:45:52 UTC 2017 x86_64
[     9.929] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/vg-root rw cryptdevice=/dev/sda2:lvm root=/dev/mapper/vg-root quiet
[     9.929] Build Date: 14 February 2017  03:36:07AM
[     9.929]  
[     9.929] Current version of pixman: 0.34.0
[     9.929] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     9.929] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     9.929] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 23 08:23:33 2017
[     9.943] (==) Using config file: "/etc/X11/xorg.conf"
[     9.943] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     9.945] (==) No Layout section.  Using the first Screen section.
[     9.945] (==) No screen section available. Using defaults.
[     9.945] (**) |-->Screen "Default Screen Section" (0)
[     9.945] (**) |   |-->Monitor "<default monitor>"
[     9.947] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     9.947] (==) Automatically adding devices
[     9.947] (==) Automatically enabling devices
[     9.947] (==) Automatically adding GPU devices
[     9.947] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     9.952] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     9.952] 	Entry deleted from font path.
[     9.957] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[     9.957] (==) ModulePath set to "/usr/lib/xorg/modules"
[     9.957] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     9.957] (II) Loader magic: 0x822d60
[     9.957] (II) Module ABI versions:
[     9.957] 	X.Org ANSI C Emulation: 0.4
[     9.957] 	X.Org Video Driver: 23.0
[     9.957] 	X.Org XInput driver : 24.1
[     9.957] 	X.Org Server Extension : 10.0
[     9.959] (++) using VT number 7

[     9.959] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     9.961] (II) xfree86: Adding drm device (/dev/dri/card1)
[     9.969] (II) xfree86: Adding drm device (/dev/dri/card0)
[     9.971] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[     9.974] (--) PCI:*(0:0:2:0) 8086:1916:17aa:2232 rev 7, Mem @ 0xf0000000/16777216, 0xe0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[     9.974] (--) PCI: (0:6:0:0) 10de:137a:17aa:2232 rev 162, Mem @ 0xf1000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128
[     9.974] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     9.984] (II) LoadModule: "glx"
[     9.989] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    10.113] (II) Module glx: vendor="NVIDIA Corporation"
[    10.113] 	compiled for 4.0.2, module version = 1.0.0
[    10.113] 	Module class: X.Org Server Extension
[    10.114] (II) NVIDIA GLX Module  378.13  Tue Feb  7 18:25:34 PST 2017
[    10.115] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    10.115] 	loading driver: nvidia
[    10.115] (==) Matched intel as autoconfigured driver 0
[    10.115] (==) Matched nvidia as autoconfigured driver 1
[    10.115] (==) Matched nouveau as autoconfigured driver 2
[    10.115] (==) Matched nv as autoconfigured driver 3
[    10.115] (==) Matched intel as autoconfigured driver 4
[    10.115] (==) Matched modesetting as autoconfigured driver 5
[    10.115] (==) Matched fbdev as autoconfigured driver 6
[    10.115] (==) Matched vesa as autoconfigured driver 7
[    10.115] (==) Assigned the driver to the xf86ConfigLayout
[    10.115] (II) LoadModule: "intel"
[    10.123] (WW) Warning, couldn't open module intel
[    10.123] (II) UnloadModule: "intel"
[    10.123] (II) Unloading intel
[    10.123] (EE) Failed to load module "intel" (module does not exist, 0)
[    10.123] (II) LoadModule: "nvidia"
[    10.123] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    10.147] (II) Module nvidia: vendor="NVIDIA Corporation"
[    10.148] 	compiled for 4.0.2, module version = 1.0.0
[    10.148] 	Module class: X.Org Video Driver
[    10.149] (II) LoadModule: "nouveau"
[    10.150] (WW) Warning, couldn't open module nouveau
[    10.150] (II) UnloadModule: "nouveau"
[    10.150] (II) Unloading nouveau
[    10.150] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    10.150] (II) LoadModule: "nv"
[    10.150] (WW) Warning, couldn't open module nv
[    10.150] (II) UnloadModule: "nv"
[    10.150] (II) Unloading nv
[    10.150] (EE) Failed to load module "nv" (module does not exist, 0)
[    10.150] (II) LoadModule: "modesetting"
[    10.150] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    10.151] (II) Module modesetting: vendor="X.Org Foundation"
[    10.151] 	compiled for 1.19.1, module version = 1.19.1
[    10.151] 	Module class: X.Org Video Driver
[    10.151] 	ABI class: X.Org Video Driver, version 23.0
[    10.152] (II) LoadModule: "fbdev"
[    10.152] (WW) Warning, couldn't open module fbdev
[    10.152] (II) UnloadModule: "fbdev"
[    10.152] (II) Unloading fbdev
[    10.152] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    10.152] (II) LoadModule: "vesa"
[    10.152] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    10.153] (II) Module vesa: vendor="X.Org Foundation"
[    10.153] 	compiled for 1.19.0, module version = 2.3.4
[    10.153] 	Module class: X.Org Video Driver
[    10.153] 	ABI class: X.Org Video Driver, version 23.0
[    10.153] (II) NVIDIA dlloader X Driver  378.13  Tue Feb  7 18:01:51 PST 2017
[    10.153] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    10.153] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    10.153] (II) VESA: driver for VESA chipsets: vesa
[    10.202] (II) modeset(0): using drv /dev/dri/card1
[    10.202] (WW) Falling back to old probe method for vesa
[    10.202] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    10.202] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    10.202] (==) modeset(0): RGB weight 888
[    10.202] (==) modeset(0): Default visual is TrueColor
[    10.202] (II) Loading sub module "glamoregl"
[    10.202] (II) LoadModule: "glamoregl"
[    10.202] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    10.227] (II) Module glamoregl: vendor="X.Org Foundation"
[    10.227] 	compiled for 1.19.1, module version = 1.0.0
[    10.227] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    10.227] (II) glamor: OpenGL accelerated X.org driver based.
[    10.380] (EE) modeset(0): eglGetDisplay() failed
[    10.382] (EE) modeset(0): glamor initialization failed
[    10.382] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[    10.382] (II) modeset(0): Double-buffered shadow updates: off
[    10.383] (II) modeset(0): Output eDP-1 has no monitor section
[    10.385] (II) modeset(0): Output DP-1 has no monitor section
[    10.386] (II) modeset(0): Output HDMI-1 has no monitor section
[    10.388] (II) modeset(0): Output DP-2 has no monitor section
[    10.390] (II) modeset(0): Output HDMI-2 has no monitor section
[    10.391] (II) modeset(0): EDID for output eDP-1
[    10.392] (II) modeset(0): Manufacturer: MEI  Model: 96a2  Serial#: 0
[    10.392] (II) modeset(0): Year: 2013  Week: 255
[    10.392] (II) modeset(0): EDID Version: 1.4
[    10.392] (II) modeset(0): Digital Display Input
[    10.392] (II) modeset(0): 8 bits per channel
[    10.392] (II) modeset(0): Digital interface is DisplayPort
[    10.392] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    10.392] (II) modeset(0): Gamma: 2.20
[    10.392] (II) modeset(0): No DPMS capabilities specified
[    10.392] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[    10.392] (II) modeset(0): First detailed timing is preferred mode
[    10.392] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    10.392] (II) modeset(0): redX: 0.652 redY: 0.329   greenX: 0.324 greenY: 0.600
[    10.392] (II) modeset(0): blueX: 0.150 blueY: 0.045   whiteX: 0.312 whiteY: 0.329
[    10.393] (II) modeset(0): Manufacturer's mask: 0
[    10.393] (II) modeset(0): Supported detailed timing:
[    10.393] (II) modeset(0): clock: 302.5 MHz   Image Size:  340 x 190 mm
[    10.393] (II) modeset(0): h_active: 2880  h_sync: 2924  h_sync_end 2928 h_blank_end 3076 h_border: 0
[    10.393] (II) modeset(0): v_active: 1620  v_sync: 1629  v_sync_end 1630 v_blanking: 1640 v_border: 0
[    10.393] (II) modeset(0): Supported detailed timing:
[    10.393] (II) modeset(0): clock: 302.5 MHz   Image Size:  340 x 190 mm
[    10.393] (II) modeset(0): h_active: 2880  h_sync: 2924  h_sync_end 2928 h_blank_end 3076 h_border: 0
[    10.393] (II) modeset(0): v_active: 1620  v_sync: 1629  v_sync_end 1630 v_blanking: 1967 v_border: 0
[    10.393] (II) modeset(0): Ranges: V min: 49 V max: 61 Hz, H min: 96 H max: 100 kHz, PixClock max 305 MHz
[    10.393] (II) modeset(0):  VVX16T028J00
[    10.393] (II) modeset(0): EDID (in hex):
[    10.393] (II) modeset(0): 	00ffffffffffff0034a9a29600000000
[    10.393] (II) modeset(0): 	ff170104a52213780212a1a754539926
[    10.393] (II) modeset(0): 	0b505400000001010101010101010101
[    10.393] (II) modeset(0): 	0101010101012a7640c4b05414602c04
[    10.393] (II) modeset(0): 	910058c11000001e2a7640c4b0545b61
[    10.393] (II) modeset(0): 	2c04910058c11000001e000000fd0031
[    10.393] (II) modeset(0): 	3d60641e010a202020202020000000fe
[    10.393] (II) modeset(0): 	005656583136543032384a30300a0050
[    10.393] (II) modeset(0): Printing probed modes for output eDP-1
[    10.393] (II) modeset(0): Modeline "2880x1620"x60.0  302.50  2880 2924 2928 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[    10.393] (II) modeset(0): Modeline "2880x1620"x50.0  302.50  2880 2924 2928 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[    10.393] (II) modeset(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    10.393] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    10.393] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    10.393] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    10.393] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    10.393] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    10.393] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    10.393] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    10.393] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    10.393] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    10.393] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    10.393] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    10.393] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    10.393] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    10.393] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    10.393] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    10.394] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    10.394] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    10.394] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    10.394] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    10.394] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    10.394] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    10.394] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    10.394] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    10.396] (II) modeset(0): EDID for output DP-1
[    10.397] (II) modeset(0): EDID for output HDMI-1
[    10.399] (II) modeset(0): EDID for output DP-2
[    10.400] (II) modeset(0): EDID for output HDMI-2
[    10.400] (II) modeset(0): Output eDP-1 connected
[    10.401] (II) modeset(0): Output DP-1 disconnected
[    10.401] (II) modeset(0): Output HDMI-1 disconnected
[    10.401] (II) modeset(0): Output DP-2 disconnected
[    10.401] (II) modeset(0): Output HDMI-2 disconnected
[    10.401] (II) modeset(0): Using exact sizes for initial modes
[    10.401] (II) modeset(0): Output eDP-1 using initial mode 2880x1620 +0+0
[    10.401] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    10.401] (==) modeset(0): DPI set to (96, 96)
[    10.401] (II) Loading sub module "fb"
[    10.401] (II) LoadModule: "fb"
[    10.401] (II) Loading /usr/lib/xorg/modules/libfb.so
[    10.403] (II) Module fb: vendor="X.Org Foundation"
[    10.403] 	compiled for 1.19.1, module version = 1.0.0
[    10.403] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    10.403] (II) Loading sub module "shadow"
[    10.403] (II) LoadModule: "shadow"
[    10.404] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    10.406] (II) Module shadow: vendor="X.Org Foundation"
[    10.406] 	compiled for 1.19.1, module version = 1.1.0
[    10.407] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    10.407] (II) UnloadModule: "vesa"
[    10.407] (II) Unloading vesa
[    10.407] (==) Depth 24 pixmap format is 32 bpp
[    10.410] (==) modeset(0): Backing store enabled
[    10.410] (==) modeset(0): Silken mouse enabled
[    10.410] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    10.412] (==) modeset(0): DPMS enabled
[    10.412] (--) RandR disabled
[    10.427] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[    10.427] (II) modeset(0): Damage tracking initialized
[    10.427] (II) modeset(0): Setting screen physical size to 762 x 428
[    10.565] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[    10.565] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    10.565] (II) LoadModule: "libinput"
[    10.565] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    10.573] (II) Module libinput: vendor="X.Org Foundation"
[    10.573] 	compiled for 1.19.1, module version = 0.24.0
[    10.573] 	Module class: X.Org XInput Driver
[    10.573] 	ABI class: X.Org XInput driver, version 24.1
[    10.573] (II) Using input driver 'libinput' for 'Power Button'
[    10.573] (**) Power Button: always reports core events
[    10.573] (**) Option "Device" "/dev/input/event4"
[    10.574] (**) Option "_source" "server/udev"
[    10.574] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    10.574] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    10.596] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event4"
[    10.597] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    10.597] (II) input device 'Power Button', /dev/input/event4 is tagged by udev as: Keyboard
[    10.597] (II) input device 'Power Button', /dev/input/event4 is a keyboard
[    10.598] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    10.598] (II) No input driver specified, ignoring this device.
[    10.598] (II) This device may have been added with another device file.
[    10.599] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
[    10.599] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    10.599] (II) Using input driver 'libinput' for 'Sleep Button'
[    10.599] (**) Sleep Button: always reports core events
[    10.599] (**) Option "Device" "/dev/input/event3"
[    10.599] (**) Option "_source" "server/udev"
[    10.599] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    10.599] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    10.616] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input4/event3"
[    10.616] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 7)
[    10.617] (II) input device 'Sleep Button', /dev/input/event3 is tagged by udev as: Keyboard
[    10.617] (II) input device 'Sleep Button', /dev/input/event3 is a keyboard
[    10.619] (II) config/udev: Adding input device Integrated Camera (/dev/input/event6)
[    10.619] (**) Integrated Camera: Applying InputClass "libinput keyboard catchall"
[    10.619] (II) Using input driver 'libinput' for 'Integrated Camera'
[    10.619] (**) Integrated Camera: always reports core events
[    10.619] (**) Option "Device" "/dev/input/event6"
[    10.619] (**) Option "_source" "server/udev"
[    10.620] (II) input device 'Integrated Camera', /dev/input/event6 is tagged by udev as: Keyboard
[    10.620] (II) input device 'Integrated Camera', /dev/input/event6 is a keyboard
[    10.666] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input7/event6"
[    10.666] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 8)
[    10.668] (II) input device 'Integrated Camera', /dev/input/event6 is tagged by udev as: Keyboard
[    10.668] (II) input device 'Integrated Camera', /dev/input/event6 is a keyboard
[    10.668] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    10.668] (II) No input driver specified, ignoring this device.
[    10.668] (II) This device may have been added with another device file.
[    10.669] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
[    10.669] (II) No input driver specified, ignoring this device.
[    10.669] (II) This device may have been added with another device file.
[    10.670] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    10.670] (II) No input driver specified, ignoring this device.
[    10.670] (II) This device may have been added with another device file.
[    10.670] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event12)
[    10.670] (II) No input driver specified, ignoring this device.
[    10.670] (II) This device may have been added with another device file.
[    10.671] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    10.671] (II) No input driver specified, ignoring this device.
[    10.671] (II) This device may have been added with another device file.
[    10.671] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    10.671] (II) No input driver specified, ignoring this device.
[    10.671] (II) This device may have been added with another device file.
[    10.672] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[    10.672] (II) No input driver specified, ignoring this device.
[    10.672] (II) This device may have been added with another device file.
[    10.672] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[    10.672] (II) No input driver specified, ignoring this device.
[    10.672] (II) This device may have been added with another device file.
[    10.673] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    10.673] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    10.673] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    10.673] (**) AT Translated Set 2 keyboard: always reports core events
[    10.673] (**) Option "Device" "/dev/input/event0"
[    10.673] (**) Option "_source" "server/udev"
[    10.674] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    10.674] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    10.737] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    10.737] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 9)
[    10.739] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    10.739] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    10.740] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event7)
[    10.740] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[    10.740] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    10.740] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    10.740] (II) LoadModule: "synaptics"
[    10.740] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    10.742] (II) Module synaptics: vendor="X.Org Foundation"
[    10.742] 	compiled for 1.19.0, module version = 1.9.0
[    10.742] 	Module class: X.Org XInput Driver
[    10.742] 	ABI class: X.Org XInput driver, version 24.1
[    10.742] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    10.742] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    10.742] (**) Option "Device" "/dev/input/event7"
[    10.780] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[    10.781] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - 5676 (res 44)
[    10.781] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - 4758 (res 67)
[    10.781] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    10.781] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    10.781] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[    10.781] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    10.781] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    10.781] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    10.781] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    10.820] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event7"
[    10.820] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 10)
[    10.820] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    10.820] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    10.820] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[    10.821] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    10.821] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    10.821] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    10.821] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    10.821] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    10.822] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[    10.822] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    10.824] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event8)
[    10.824] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[    10.824] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[    10.824] (**) TPPS/2 IBM TrackPoint: always reports core events
[    10.824] (**) Option "Device" "/dev/input/event8"
[    10.824] (**) Option "_source" "server/udev"
[    10.825] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event8 is tagged by udev as: Mouse Pointingstick
[    10.825] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event8 is a pointer caps
[    10.867] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input9/event8"
[    10.867] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 11)
[    10.868] (**) Option "AccelerationScheme" "none"
[    10.868] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[    10.868] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[    10.868] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[    10.869] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event8 is tagged by udev as: Mouse Pointingstick
[    10.869] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event8 is a pointer caps
[    10.870] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[    10.870] (II) No input driver specified, ignoring this device.
[    10.870] (II) This device may have been added with another device file.
[    10.871] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[    10.871] (II) No input driver specified, ignoring this device.
[    10.871] (II) This device may have been added with another device file.
[    10.873] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event2)
[    10.873] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[    10.873] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[    10.873] (**) ThinkPad Extra Buttons: always reports core events
[    10.873] (**) Option "Device" "/dev/input/event2"
[    10.873] (**) Option "_source" "server/udev"
[    10.874] (II) input device 'ThinkPad Extra Buttons', /dev/input/event2 is tagged by udev as: Keyboard
[    10.874] (II) input device 'ThinkPad Extra Buttons', /dev/input/event2 is a keyboard
[    10.897] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input3/event2"
[    10.897] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 12)
[    10.898] (II) input device 'ThinkPad Extra Buttons', /dev/input/event2 is tagged by udev as: Keyboard
[    10.898] (II) input device 'ThinkPad Extra Buttons', /dev/input/event2 is a keyboard
[    10.986] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event10)
[    10.986] (II) No input driver specified, ignoring this device.
[    10.986] (II) This device may have been added with another device file.
[    10.986] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[    10.986] (II) No input driver specified, ignoring this device.
[    10.986] (II) This device may have been added with another device file.
[    10.986] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event11)
[    10.986] (II) No input driver specified, ignoring this device.
[    10.986] (II) This device may have been added with another device file.
[    10.986] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event12)
[    10.986] (II) No input driver specified, ignoring this device.
[    10.986] (II) This device may have been added with another device file.
[    10.987] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    10.987] (II) No input driver specified, ignoring this device.
[    10.987] (II) This device may have been added with another device file.
[    10.987] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event16)
[    10.987] (II) No input driver specified, ignoring this device.
[    10.987] (II) This device may have been added with another device file.
[    10.987] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
[    10.987] (II) No input driver specified, ignoring this device.
[    10.987] (II) This device may have been added with another device file.
[    10.987] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    10.987] (II) No input driver specified, ignoring this device.
[    10.987] (II) This device may have been added with another device file.

From my understanding it gets sour at 10.380

@V1Del:
if you mean the

Section "Module"
    Load "modesetting"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "<BusID for NVIDIA device here>"
    Option "AllowEmptyInitialConfiguration"
EndSection

then yes, I added that, too (with the inserted address of my nvidia card, in my case 06:00.0)

Offline

#5 2017-02-23 07:55:00

lordheavy
Developer
From: France
Registered: 2010-04-01
Posts: 291

Re: OpenGL refusing to work with Quadro M500M on Lenovo P50s [SOLVED]

Florian Rohm wrote:

Yeah, sorry, of course. Just saw the other thread with a very similar Problem which got posted while I was writing.

@V1Del:
if you mean the

Section "Module"
    Load "modesetting"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "<BusID for NVIDIA device here>"
    Option "AllowEmptyInitialConfiguration"
EndSection

then yes, I added that, too (with the inserted address of my nvidia card, in my case 06:00.0)


With your configuration file you are overriding file /usr/share/X11/xorg.conf.d/nvidia-drm-outputclass.conf
You must add 'ModulePath "/usr/lib/nvidia/xorg"' in your Device section, or you can try with the Device section removed.

Offline

#6 2017-02-23 17:52:46

Florian Rohm
Member
Registered: 2017-02-22
Posts: 4

Re: OpenGL refusing to work with Quadro M500M on Lenovo P50s [SOLVED]

Ah, thanks for the info!
So, I had some time for rambling around, but no real progress. (there's a tldr at the end smile)

Unfortunately, I tried the ModulePath like you described, i.e.

Section "Module"
    Load "modesetting"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:06:00:0"
    ModulePath "/usr/lib/nvidia/xorg"
    Option "AllowEmptyInitialConfiguration"
EndSection 

but he complains that ModulePath is no valid Key, i.e.

[    11.357] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[    11.357] X Protocol Version 11, Revision 0
[    11.357] Build Operating System: Linux 4.8.14-1-ARCH x86_64 
[    11.357] Current Operating System: Linux Flo-Lenovo-P50s 4.9.11-1-ARCH #1 SMP PREEMPT Sun Feb 19 13:45:52 UTC 2017 x86_64
[    11.357] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/vg-root rw cryptdevice=/dev/sda2:lvm root=/dev/mapper/vg-root quiet
[    11.357] Build Date: 14 February 2017  03:36:07AM
[    11.357]  
[    11.357] Current version of pixman: 0.34.0
[    11.357] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    11.357] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.357] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 23 17:36:20 2017
[    11.358] (==) Using config file: "/etc/X11/xorg.conf"
[    11.358] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    11.358] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.358] Parse error on line 9 of section Device in file /etc/X11/xorg.conf.d/20-nvidia.conf
	"ModulePath" is not a valid keyword in this section.
[    11.358] (EE) Problem parsing the config file
[    11.358] (EE) Error parsing the config file
[    11.358] (EE) 
Fatal server error:
[    11.358] (EE) no screens found(EE) 
[    11.358] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    11.358] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    11.358] (EE) 
[    11.358] (EE) Server terminated with error (1). Closing log file.

If I leave out the Device part alltogether, i.e.

Section "Module"
    Load "modesetting"
EndSection
 
[     8.757] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[     8.758] X Protocol Version 11, Revision 0
[     8.758] Build Operating System: Linux 4.8.14-1-ARCH x86_64 
[     8.758] Current Operating System: Linux Flo-Lenovo-P50s 4.9.11-1-ARCH #1 SMP PREEMPT Sun Feb 19 13:45:52 UTC 2017 x86_64
[     8.758] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/vg-root rw cryptdevice=/dev/sda2:lvm root=/dev/mapper/vg-root quiet
[     8.758] Build Date: 14 February 2017  03:36:07AM
[     8.758]  
[     8.758] Current version of pixman: 0.34.0
[     8.758] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     8.758] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     8.758] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 23 18:09:48 2017
[     8.762] (==) Using config file: "/etc/X11/xorg.conf"
[     8.762] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     8.762] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     8.763] (==) No Layout section.  Using the first Screen section.
[     8.763] (==) No screen section available. Using defaults.
[     8.763] (**) |-->Screen "Default Screen Section" (0)
[     8.763] (**) |   |-->Monitor "<default monitor>"
[     8.764] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     8.764] (==) Automatically adding devices
[     8.764] (==) Automatically enabling devices
[     8.764] (==) Automatically adding GPU devices
[     8.764] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     8.765] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[     8.765] 	Entry deleted from font path.
[     8.767] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[     8.767] (==) ModulePath set to "/usr/lib/xorg/modules"
[     8.767] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     8.767] (II) Loader magic: 0x822d60
[     8.767] (II) Module ABI versions:
[     8.767] 	X.Org ANSI C Emulation: 0.4
[     8.767] 	X.Org Video Driver: 23.0
[     8.767] 	X.Org XInput driver : 24.1
[     8.768] 	X.Org Server Extension : 10.0
[     8.769] (++) using VT number 7

[     8.769] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     8.770] (II) xfree86: Adding drm device (/dev/dri/card0)
[     8.785] (II) xfree86: Adding drm device (/dev/dri/card1)
[     8.786] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[     8.787] (--) PCI:*(0:0:2:0) 8086:1916:17aa:2232 rev 7, Mem @ 0xf0000000/16777216, 0xe0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[     8.787] (--) PCI: (0:6:0:0) 10de:137a:17aa:2232 rev 162, Mem @ 0xf1000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128
[     8.787] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     8.787] (II) "glx" will be loaded by default.
[     8.787] (II) LoadModule: "modesetting"
[     8.792] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     8.793] (II) Module modesetting: vendor="X.Org Foundation"
[     8.793] 	compiled for 1.19.1, module version = 1.19.1
[     8.793] 	Module class: X.Org Video Driver
[     8.793] 	ABI class: X.Org Video Driver, version 23.0
[     8.793] (II) LoadModule: "glx"
[     8.793] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[     8.847] (II) Module glx: vendor="NVIDIA Corporation"
[     8.847] 	compiled for 4.0.2, module version = 1.0.0
[     8.847] 	Module class: X.Org Server Extension
[     8.847] (II) NVIDIA GLX Module  378.13  Tue Feb  7 18:25:34 PST 2017
[     8.848] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[     8.848] 	loading driver: nvidia
[     8.848] (==) Matched intel as autoconfigured driver 0
[     8.849] (==) Matched nvidia as autoconfigured driver 1
[     8.849] (==) Matched nouveau as autoconfigured driver 2
[     8.849] (==) Matched nv as autoconfigured driver 3
[     8.849] (==) Matched intel as autoconfigured driver 4
[     8.849] (==) Matched modesetting as autoconfigured driver 5
[     8.849] (==) Matched fbdev as autoconfigured driver 6
[     8.849] (==) Matched vesa as autoconfigured driver 7
[     8.849] (==) Assigned the driver to the xf86ConfigLayout
[     8.849] (II) LoadModule: "intel"
[     8.852] (WW) Warning, couldn't open module intel
[     8.852] (II) UnloadModule: "intel"
[     8.852] (II) Unloading intel
[     8.852] (EE) Failed to load module "intel" (module does not exist, 0)
[     8.852] (II) LoadModule: "nvidia"
[     8.852] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[     8.861] (II) Module nvidia: vendor="NVIDIA Corporation"
[     8.861] 	compiled for 4.0.2, module version = 1.0.0
[     8.861] 	Module class: X.Org Video Driver
[     8.862] (II) LoadModule: "nouveau"
[     8.863] (WW) Warning, couldn't open module nouveau
[     8.863] (II) UnloadModule: "nouveau"
[     8.863] (II) Unloading nouveau
[     8.863] (EE) Failed to load module "nouveau" (module does not exist, 0)
[     8.863] (II) LoadModule: "nv"
[     8.863] (WW) Warning, couldn't open module nv
[     8.863] (II) UnloadModule: "nv"
[     8.863] (II) Unloading nv
[     8.863] (EE) Failed to load module "nv" (module does not exist, 0)
[     8.863] (II) LoadModule: "modesetting"
[     8.863] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     8.863] (II) Module modesetting: vendor="X.Org Foundation"
[     8.863] 	compiled for 1.19.1, module version = 1.19.1
[     8.863] 	Module class: X.Org Video Driver
[     8.863] 	ABI class: X.Org Video Driver, version 23.0
[     8.863] (II) UnloadModule: "modesetting"
[     8.863] (II) Unloading modesetting
[     8.863] (II) Failed to load module "modesetting" (already loaded, 0)
[     8.863] (II) LoadModule: "fbdev"
[     8.864] (WW) Warning, couldn't open module fbdev
[     8.864] (II) UnloadModule: "fbdev"
[     8.864] (II) Unloading fbdev
[     8.864] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     8.864] (II) LoadModule: "vesa"
[     8.864] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[     8.865] (II) Module vesa: vendor="X.Org Foundation"
[     8.865] 	compiled for 1.19.0, module version = 2.3.4
[     8.865] 	Module class: X.Org Video Driver
[     8.865] 	ABI class: X.Org Video Driver, version 23.0
[     8.865] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     8.865] (II) NVIDIA dlloader X Driver  378.13  Tue Feb  7 18:01:51 PST 2017
[     8.865] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[     8.865] (II) VESA: driver for VESA chipsets: vesa
[     8.902] (II) modeset(0): using drv /dev/dri/card0
[     8.902] (WW) Falling back to old probe method for vesa
[     8.902] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     8.902] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[     8.902] (==) modeset(0): RGB weight 888
[     8.902] (==) modeset(0): Default visual is TrueColor
[     8.902] (II) Loading sub module "glamoregl"
[     8.902] (II) LoadModule: "glamoregl"
[     8.902] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[     8.912] (II) Module glamoregl: vendor="X.Org Foundation"
[     8.912] 	compiled for 1.19.1, module version = 1.0.0
[     8.912] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.912] (II) glamor: OpenGL accelerated X.org driver based.
[     8.968] (EE) modeset(0): eglGetDisplay() failed
[     8.969] (EE) modeset(0): glamor initialization failed
[     8.969] (II) modeset(0): ShadowFB: preferred YES, enabled YES
[     8.969] (II) modeset(0): Double-buffered shadow updates: off
[     8.969] (II) modeset(0): Output eDP-1 has no monitor section
[     8.972] (II) modeset(0): Output DP-1 has no monitor section
[     8.973] (II) modeset(0): Output HDMI-1 has no monitor section
[     8.975] (II) modeset(0): Output DP-2 has no monitor section
[     8.977] (II) modeset(0): Output HDMI-2 has no monitor section
[     8.977] (II) modeset(0): EDID for output eDP-1
[     8.977] (II) modeset(0): Manufacturer: MEI  Model: 96a2  Serial#: 0
[     8.977] (II) modeset(0): Year: 2013  Week: 255
[     8.977] (II) modeset(0): EDID Version: 1.4
[     8.977] (II) modeset(0): Digital Display Input
[     8.977] (II) modeset(0): 8 bits per channel
[     8.977] (II) modeset(0): Digital interface is DisplayPort
[     8.977] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[     8.977] (II) modeset(0): Gamma: 2.20
[     8.977] (II) modeset(0): No DPMS capabilities specified
[     8.977] (II) modeset(0): Supported color encodings: RGB 4:4:4 
[     8.977] (II) modeset(0): First detailed timing is preferred mode
[     8.977] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[     8.977] (II) modeset(0): redX: 0.652 redY: 0.329   greenX: 0.324 greenY: 0.600
[     8.977] (II) modeset(0): blueX: 0.150 blueY: 0.045   whiteX: 0.312 whiteY: 0.329
[     8.977] (II) modeset(0): Manufacturer's mask: 0
[     8.977] (II) modeset(0): Supported detailed timing:
[     8.977] (II) modeset(0): clock: 302.5 MHz   Image Size:  340 x 190 mm
[     8.977] (II) modeset(0): h_active: 2880  h_sync: 2924  h_sync_end 2928 h_blank_end 3076 h_border: 0
[     8.977] (II) modeset(0): v_active: 1620  v_sync: 1629  v_sync_end 1630 v_blanking: 1640 v_border: 0
[     8.977] (II) modeset(0): Supported detailed timing:
[     8.977] (II) modeset(0): clock: 302.5 MHz   Image Size:  340 x 190 mm
[     8.977] (II) modeset(0): h_active: 2880  h_sync: 2924  h_sync_end 2928 h_blank_end 3076 h_border: 0
[     8.977] (II) modeset(0): v_active: 1620  v_sync: 1629  v_sync_end 1630 v_blanking: 1967 v_border: 0
[     8.977] (II) modeset(0): Ranges: V min: 49 V max: 61 Hz, H min: 96 H max: 100 kHz, PixClock max 305 MHz
[     8.977] (II) modeset(0):  VVX16T028J00
[     8.977] (II) modeset(0): EDID (in hex):
[     8.977] (II) modeset(0): 	00ffffffffffff0034a9a29600000000
[     8.977] (II) modeset(0): 	ff170104a52213780212a1a754539926
[     8.977] (II) modeset(0): 	0b505400000001010101010101010101
[     8.977] (II) modeset(0): 	0101010101012a7640c4b05414602c04
[     8.977] (II) modeset(0): 	910058c11000001e2a7640c4b0545b61
[     8.977] (II) modeset(0): 	2c04910058c11000001e000000fd0031
[     8.977] (II) modeset(0): 	3d60641e010a202020202020000000fe
[     8.977] (II) modeset(0): 	005656583136543032384a30300a0050
[     8.978] (II) modeset(0): Printing probed modes for output eDP-1
[     8.978] (II) modeset(0): Modeline "2880x1620"x60.0  302.50  2880 2924 2928 3076  1620 1629 1630 1640 +hsync +vsync (98.3 kHz eP)
[     8.978] (II) modeset(0): Modeline "2880x1620"x50.0  302.50  2880 2924 2928 3076  1620 1629 1630 1967 +hsync +vsync (98.3 kHz e)
[     8.978] (II) modeset(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[     8.978] (II) modeset(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[     8.978] (II) modeset(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[     8.978] (II) modeset(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[     8.978] (II) modeset(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[     8.978] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[     8.978] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[     8.978] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[     8.978] (II) modeset(0): Modeline "1024x768"x60.0  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[     8.978] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[     8.978] (II) modeset(0): Modeline "960x720"x60.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[     8.978] (II) modeset(0): Modeline "928x696"x60.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[     8.978] (II) modeset(0): Modeline "896x672"x60.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[     8.978] (II) modeset(0): Modeline "800x600"x60.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[     8.978] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[     8.978] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[     8.978] (II) modeset(0): Modeline "700x525"x60.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[     8.978] (II) modeset(0): Modeline "640x512"x60.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[     8.978] (II) modeset(0): Modeline "640x480"x60.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[     8.978] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[     8.978] (II) modeset(0): Modeline "512x384"x60.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[     8.978] (II) modeset(0): Modeline "400x300"x60.3   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[     8.978] (II) modeset(0): Modeline "400x300"x56.3   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[     8.978] (II) modeset(0): Modeline "320x240"x60.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[     8.980] (II) modeset(0): EDID for output DP-1
[     8.981] (II) modeset(0): EDID for output HDMI-1
[     8.983] (II) modeset(0): EDID for output DP-2
[     8.984] (II) modeset(0): EDID for output HDMI-2
[     8.984] (II) modeset(0): Output eDP-1 connected
[     8.984] (II) modeset(0): Output DP-1 disconnected
[     8.984] (II) modeset(0): Output HDMI-1 disconnected
[     8.984] (II) modeset(0): Output DP-2 disconnected
[     8.984] (II) modeset(0): Output HDMI-2 disconnected
[     8.984] (II) modeset(0): Using exact sizes for initial modes
[     8.984] (II) modeset(0): Output eDP-1 using initial mode 2880x1620 +0+0
[     8.984] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[     8.984] (==) modeset(0): DPI set to (96, 96)
[     8.984] (II) Loading sub module "fb"
[     8.984] (II) LoadModule: "fb"
[     8.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[     8.986] (II) Module fb: vendor="X.Org Foundation"
[     8.986] 	compiled for 1.19.1, module version = 1.0.0
[     8.986] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.986] (II) Loading sub module "shadow"
[     8.986] (II) LoadModule: "shadow"
[     8.986] (II) Loading /usr/lib/xorg/modules/libshadow.so
[     8.986] (II) Module shadow: vendor="X.Org Foundation"
[     8.986] 	compiled for 1.19.1, module version = 1.1.0
[     8.986] 	ABI class: X.Org ANSI C Emulation, version 0.4
[     8.986] (II) UnloadModule: "vesa"
[     8.986] (II) Unloading vesa
[     8.986] (==) Depth 24 pixmap format is 32 bpp
[     8.988] (==) modeset(0): Backing store enabled
[     8.988] (==) modeset(0): Silken mouse enabled
[     8.988] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[     8.989] (==) modeset(0): DPMS enabled
[     8.989] (--) RandR disabled
[     8.995] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[     8.995] (II) modeset(0): Damage tracking initialized
[     8.995] (II) modeset(0): Setting screen physical size to 762 x 428
[     9.089] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[     9.089] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     9.089] (II) LoadModule: "libinput"
[     9.089] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     9.094] (II) Module libinput: vendor="X.Org Foundation"
[     9.094] 	compiled for 1.19.1, module version = 0.24.0
[     9.094] 	Module class: X.Org XInput Driver
[     9.094] 	ABI class: X.Org XInput driver, version 24.1
[     9.094] (II) Using input driver 'libinput' for 'Power Button'
[     9.094] (**) Power Button: always reports core events
[     9.094] (**) Option "Device" "/dev/input/event3"
[     9.094] (**) Option "_source" "server/udev"
[     9.094] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     9.094] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     9.120] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[     9.120] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     9.120] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[     9.120] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[     9.121] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[     9.121] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     9.121] (II) Using input driver 'libinput' for 'Video Bus'
[     9.121] (**) Video Bus: always reports core events
[     9.121] (**) Option "Device" "/dev/input/event4"
[     9.121] (**) Option "_source" "server/udev"
[     9.121] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[     9.121] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[     9.140] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5/event4"
[     9.140] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     9.140] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[     9.140] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[     9.141] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[     9.141] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     9.141] (II) Using input driver 'libinput' for 'Video Bus'
[     9.141] (**) Video Bus: always reports core events
[     9.141] (**) Option "Device" "/dev/input/event5"
[     9.141] (**) Option "_source" "server/udev"
[     9.141] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[     9.141] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[     9.160] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:21/LNXVIDEO:01/input/input6/event5"
[     9.160] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[     9.161] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[     9.161] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[     9.162] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     9.162] (II) No input driver specified, ignoring this device.
[     9.162] (II) This device may have been added with another device file.
[     9.162] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[     9.162] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     9.162] (II) Using input driver 'libinput' for 'Sleep Button'
[     9.162] (**) Sleep Button: always reports core events
[     9.162] (**) Option "Device" "/dev/input/event2"
[     9.162] (**) Option "_source" "server/udev"
[     9.163] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[     9.163] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[     9.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[     9.193] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[     9.194] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[     9.194] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[     9.196] (II) config/udev: Adding input device Integrated Camera (/dev/input/event8)
[     9.196] (**) Integrated Camera: Applying InputClass "libinput keyboard catchall"
[     9.196] (II) Using input driver 'libinput' for 'Integrated Camera'
[     9.196] (**) Integrated Camera: always reports core events
[     9.196] (**) Option "Device" "/dev/input/event8"
[     9.196] (**) Option "_source" "server/udev"
[     9.196] (II) input device 'Integrated Camera', /dev/input/event8 is tagged by udev as: Keyboard
[     9.196] (II) input device 'Integrated Camera', /dev/input/event8 is a keyboard
[     9.240] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input10/event8"
[     9.240] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
[     9.241] (II) input device 'Integrated Camera', /dev/input/event8 is tagged by udev as: Keyboard
[     9.241] (II) input device 'Integrated Camera', /dev/input/event8 is a keyboard
[     9.242] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[     9.242] (II) No input driver specified, ignoring this device.
[     9.242] (II) This device may have been added with another device file.
[     9.242] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event11)
[     9.242] (II) No input driver specified, ignoring this device.
[     9.242] (II) This device may have been added with another device file.
[     9.243] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[     9.243] (II) No input driver specified, ignoring this device.
[     9.243] (II) This device may have been added with another device file.
[     9.243] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event13)
[     9.243] (II) No input driver specified, ignoring this device.
[     9.243] (II) This device may have been added with another device file.
[     9.244] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[     9.244] (II) No input driver specified, ignoring this device.
[     9.244] (II) This device may have been added with another device file.
[     9.244] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[     9.244] (II) No input driver specified, ignoring this device.
[     9.244] (II) This device may have been added with another device file.
[     9.245] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event16)
[     9.245] (II) No input driver specified, ignoring this device.
[     9.245] (II) This device may have been added with another device file.
[     9.245] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event17)
[     9.245] (II) No input driver specified, ignoring this device.
[     9.245] (II) This device may have been added with another device file.
[     9.246] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[     9.246] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     9.246] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     9.246] (**) AT Translated Set 2 keyboard: always reports core events
[     9.246] (**) Option "Device" "/dev/input/event0"
[     9.246] (**) Option "_source" "server/udev"
[     9.247] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     9.247] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     9.290] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[     9.290] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[     9.291] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[     9.291] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[     9.291] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[     9.291] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     9.291] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     9.291] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     9.291] (II) LoadModule: "synaptics"
[     9.292] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     9.294] (II) Module synaptics: vendor="X.Org Foundation"
[     9.294] 	compiled for 1.19.0, module version = 1.9.0
[     9.294] 	Module class: X.Org XInput Driver
[     9.295] 	ABI class: X.Org XInput driver, version 24.1
[     9.295] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     9.295] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.295] (**) Option "Device" "/dev/input/event9"
[     9.340] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[     9.340] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1266 - 5676 (res 44)
[     9.340] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1096 - 4758 (res 67)
[     9.340] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     9.340] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     9.340] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[     9.340] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     9.341] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[     9.341] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.341] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.390] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[     9.390] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 12)
[     9.390] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     9.390] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     9.390] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[     9.391] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     9.391] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     9.391] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     9.391] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     9.391] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.392] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[     9.392] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     9.393] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[     9.393] (II) No input driver specified, ignoring this device.
[     9.393] (II) This device may have been added with another device file.
[     9.395] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event6)
[     9.395] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[     9.395] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[     9.395] (**) ThinkPad Extra Buttons: always reports core events
[     9.395] (**) Option "Device" "/dev/input/event6"
[     9.395] (**) Option "_source" "server/udev"
[     9.396] (II) input device 'ThinkPad Extra Buttons', /dev/input/event6 is tagged by udev as: Keyboard
[     9.396] (II) input device 'ThinkPad Extra Buttons', /dev/input/event6 is a keyboard
[     9.420] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input7/event6"
[     9.420] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 13)
[     9.422] (II) input device 'ThinkPad Extra Buttons', /dev/input/event6 is tagged by udev as: Keyboard
[     9.422] (II) input device 'ThinkPad Extra Buttons', /dev/input/event6 is a keyboard
[     9.504] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[     9.504] (II) No input driver specified, ignoring this device.
[     9.504] (II) This device may have been added with another device file.
[     9.505] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event18)
[     9.505] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[     9.505] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[     9.505] (**) TPPS/2 IBM TrackPoint: always reports core events
[     9.505] (**) Option "Device" "/dev/input/event18"
[     9.505] (**) Option "_source" "server/udev"
[     9.506] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event18 is tagged by udev as: Mouse Pointingstick
[     9.506] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event18 is a pointer caps
[     9.547] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input11/event18"
[     9.547] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 14)
[     9.548] (**) Option "AccelerationScheme" "none"
[     9.548] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[     9.548] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[     9.548] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[     9.550] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event18 is tagged by udev as: Mouse Pointingstick
[     9.550] (II) input device 'TPPS/2 IBM TrackPoint', /dev/input/event18 is a pointer caps

Then I tried a section "Files" i gathered whilst googling (sorry, don't have the link anymore)

Section "Module"
    Load "modesetting"
EndSection

Section "Files"
    ModulePath "/usr/lib/nvidia/xorg"
EndSection

which resulted in

[    11.339] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[    11.339] X Protocol Version 11, Revision 0
[    11.339] Build Operating System: Linux 4.8.14-1-ARCH x86_64 
[    11.339] Current Operating System: Linux Flo-Lenovo-P50s 4.9.11-1-ARCH #1 SMP PREEMPT Sun Feb 19 13:45:52 UTC 2017 x86_64
[    11.339] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/vg-root rw cryptdevice=/dev/sda2:lvm root=/dev/mapper/vg-root quiet
[    11.339] Build Date: 14 February 2017  03:36:07AM
[    11.339]  
[    11.339] Current version of pixman: 0.34.0
[    11.339] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    11.339] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.339] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 23 18:18:32 2017
[    11.340] (==) Using config file: "/etc/X11/xorg.conf"
[    11.340] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    11.340] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.340] (==) No Layout section.  Using the first Screen section.
[    11.340] (==) No screen section available. Using defaults.
[    11.340] (**) |-->Screen "Default Screen Section" (0)
[    11.340] (**) |   |-->Monitor "<default monitor>"
[    11.340] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    11.340] (==) Automatically adding devices
[    11.340] (==) Automatically enabling devices
[    11.340] (==) Automatically adding GPU devices
[    11.340] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    11.340] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    11.340] 	Entry deleted from font path.
[    11.340] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    11.340] (**) ModulePath set to "/usr/lib/nvidia/xorg"
[    11.340] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    11.340] (II) Loader magic: 0x822d60
[    11.340] (II) Module ABI versions:
[    11.340] 	X.Org ANSI C Emulation: 0.4
[    11.340] 	X.Org Video Driver: 23.0
[    11.341] 	X.Org XInput driver : 24.1
[    11.341] 	X.Org Server Extension : 10.0
[    11.342] (++) using VT number 7

[    11.342] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    11.344] (II) xfree86: Adding drm device (/dev/dri/card0)
[    11.347] (II) xfree86: Adding drm device (/dev/dri/card1)
[    11.348] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/nvidia/xorg"
[    11.350] (--) PCI:*(0:0:2:0) 8086:1916:17aa:2232 rev 7, Mem @ 0xf0000000/16777216, 0xe0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[    11.350] (--) PCI: (0:6:0:0) 10de:137a:17aa:2232 rev 162, Mem @ 0xf1000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128
[    11.350] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    11.350] (II) "glx" will be loaded by default.
[    11.350] (II) LoadModule: "modesetting"
[    11.351] (WW) Warning, couldn't open module modesetting
[    11.351] (II) UnloadModule: "modesetting"
[    11.351] (II) Unloading modesetting
[    11.351] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    11.351] (II) LoadModule: "glx"
[    11.351] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    11.358] (II) Module glx: vendor="NVIDIA Corporation"
[    11.358] 	compiled for 4.0.2, module version = 1.0.0
[    11.358] 	Module class: X.Org Server Extension
[    11.358] (II) NVIDIA GLX Module  378.13  Tue Feb  7 18:25:34 PST 2017
[    11.358] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    11.358] 	loading driver: nvidia
[    11.358] (==) Matched intel as autoconfigured driver 0
[    11.358] (==) Matched nvidia as autoconfigured driver 1
[    11.358] (==) Matched nouveau as autoconfigured driver 2
[    11.358] (==) Matched nv as autoconfigured driver 3
[    11.358] (==) Matched intel as autoconfigured driver 4
[    11.358] (==) Matched modesetting as autoconfigured driver 5
[    11.358] (==) Matched fbdev as autoconfigured driver 6
[    11.358] (==) Matched vesa as autoconfigured driver 7
[    11.358] (==) Assigned the driver to the xf86ConfigLayout
[    11.358] (II) LoadModule: "intel"
[    11.358] (WW) Warning, couldn't open module intel
[    11.358] (II) UnloadModule: "intel"
[    11.358] (II) Unloading intel
[    11.358] (EE) Failed to load module "intel" (module does not exist, 0)
[    11.358] (II) LoadModule: "nvidia"
[    11.358] (WW) Warning, couldn't open module nvidia
[    11.358] (II) UnloadModule: "nvidia"
[    11.358] (II) Unloading nvidia
[    11.358] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    11.358] (II) LoadModule: "nouveau"
[    11.358] (WW) Warning, couldn't open module nouveau
[    11.358] (II) UnloadModule: "nouveau"
[    11.358] (II) Unloading nouveau
[    11.358] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    11.358] (II) LoadModule: "nv"
[    11.358] (WW) Warning, couldn't open module nv
[    11.358] (II) UnloadModule: "nv"
[    11.358] (II) Unloading nv
[    11.358] (EE) Failed to load module "nv" (module does not exist, 0)
[    11.358] (II) LoadModule: "modesetting"
[    11.359] (WW) Warning, couldn't open module modesetting
[    11.359] (II) UnloadModule: "modesetting"
[    11.359] (II) Unloading modesetting
[    11.359] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    11.359] (II) LoadModule: "fbdev"
[    11.359] (WW) Warning, couldn't open module fbdev
[    11.359] (II) UnloadModule: "fbdev"
[    11.359] (II) Unloading fbdev
[    11.359] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    11.359] (II) LoadModule: "vesa"
[    11.359] (WW) Warning, couldn't open module vesa
[    11.359] (II) UnloadModule: "vesa"
[    11.359] (II) Unloading vesa
[    11.359] (EE) Failed to load module "vesa" (module does not exist, 0)
[    11.359] (EE) No drivers available.
[    11.359] (EE) 
Fatal server error:
[    11.359] (EE) no screens found(EE) 
[    11.359] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    11.359] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    11.359] (EE) 
[    11.359] (EE) Server terminated with error (1). Closing log file.

And finally with all of them

Section "Module"
    Load "modesetting"
EndSection

Section "Files"
    ModulePath "/usr/lib/nvidia/xorg"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:06:00:0"
    Option "AllowEmptyInitialConfiguration"
EndSection
[    11.461] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[    11.461] X Protocol Version 11, Revision 0
[    11.461] Build Operating System: Linux 4.8.14-1-ARCH x86_64 
[    11.461] Current Operating System: Linux Flo-Lenovo-P50s 4.9.11-1-ARCH #1 SMP PREEMPT Sun Feb 19 13:45:52 UTC 2017 x86_64
[    11.461] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/mapper/vg-root rw cryptdevice=/dev/sda2:lvm root=/dev/mapper/vg-root quiet
[    11.461] Build Date: 14 February 2017  03:36:07AM
[    11.461]  
[    11.461] Current version of pixman: 0.34.0
[    11.461] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    11.461] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    11.461] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 23 18:26:31 2017
[    11.462] (==) Using config file: "/etc/X11/xorg.conf"
[    11.462] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    11.462] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    11.462] (==) No Layout section.  Using the first Screen section.
[    11.462] (==) No screen section available. Using defaults.
[    11.462] (**) |-->Screen "Default Screen Section" (0)
[    11.462] (**) |   |-->Monitor "<default monitor>"
[    11.462] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    11.462] (**) |   |-->Device "nvidia"
[    11.462] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    11.462] (==) Automatically adding devices
[    11.462] (==) Automatically enabling devices
[    11.462] (==) Automatically adding GPU devices
[    11.462] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    11.462] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    11.462] 	Entry deleted from font path.
[    11.462] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    11.462] (**) ModulePath set to "/usr/lib/nvidia/xorg"
[    11.462] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    11.462] (II) Loader magic: 0x822d60
[    11.462] (II) Module ABI versions:
[    11.462] 	X.Org ANSI C Emulation: 0.4
[    11.462] 	X.Org Video Driver: 23.0
[    11.462] 	X.Org XInput driver : 24.1
[    11.462] 	X.Org Server Extension : 10.0
[    11.463] (++) using VT number 7

[    11.463] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    11.464] (II) xfree86: Adding drm device (/dev/dri/card0)
[    11.474] (II) xfree86: Adding drm device (/dev/dri/card1)
[    11.475] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/nvidia/xorg"
[    11.476] (--) PCI:*(0:0:2:0) 8086:1916:17aa:2232 rev 7, Mem @ 0xf0000000/16777216, 0xe0000000/268435456, I/O @ 0x0000e000/64, BIOS @ 0x????????/131072
[    11.476] (--) PCI: (0:6:0:0) 10de:137a:17aa:2232 rev 162, Mem @ 0xf1000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128
[    11.476] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    11.476] (II) "glx" will be loaded by default.
[    11.476] (II) LoadModule: "modesetting"
[    11.476] (WW) Warning, couldn't open module modesetting
[    11.476] (II) UnloadModule: "modesetting"
[    11.476] (II) Unloading modesetting
[    11.476] (EE) Failed to load module "modesetting" (module does not exist, 0)
[    11.477] (II) LoadModule: "glx"
[    11.477] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    11.483] (II) Module glx: vendor="NVIDIA Corporation"
[    11.483] 	compiled for 4.0.2, module version = 1.0.0
[    11.483] 	Module class: X.Org Server Extension
[    11.483] (II) NVIDIA GLX Module  378.13  Tue Feb  7 18:25:34 PST 2017
[    11.483] (II) LoadModule: "nvidia"
[    11.484] (WW) Warning, couldn't open module nvidia
[    11.484] (II) UnloadModule: "nvidia"
[    11.484] (II) Unloading nvidia
[    11.484] (EE) Failed to load module "nvidia" (module does not exist, 0)
[    11.484] (EE) No drivers available.
[    11.484] (EE) 
Fatal server error:
[    11.484] (EE) no screens found(EE) 
[    11.484] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    11.484] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    11.484] (EE) 
[    11.484] (EE) Server terminated with error (1). Closing log file.

(sorry, this post got very long)

TLDR
The ModulePath kinda works, but then the nvidia module is not found anymore.

I was also searching the bios switch for the internal card but did not find anything even remotely close.

Offline

#7 2017-02-23 20:53:33

seth
Member
Registered: 2012-09-03
Posts: 15,662

Re: OpenGL refusing to work with Quadro M500M on Lenovo P50s [SOLVED]

ModulePath  "/usr/lib/nvidia/xorg,  /usr/lib/xorg/modules"

and oc. "man xorg.conf" ;-)

Offline

#8 2017-02-23 21:27:32

loqs
Member
Registered: 2014-03-06
Posts: 11,184

Re: OpenGL refusing to work with Quadro M500M on Lenovo P50s [SOLVED]

Slightly off topic but it seems strange to me that this system is failing with what at least in one configuration was a standard NVIDIA_Optimus configuration as recommended on the wiki and seems to still work as proven here.

Offline

#9 2017-02-23 21:48:50

Florian Rohm
Member
Registered: 2017-02-22
Posts: 4

Re: OpenGL refusing to work with Quadro M500M on Lenovo P50s [SOLVED]

Thanks guys!
The following config did the trick:

Section "Module"
    Load "modesetting"
EndSection

Section "Files"
    ModulePath "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
EndSection

Section "Device"
    Identifier "nvidia"
    Driver "nvidia"
    BusID "PCI:06:00:0"
    Option "AllowEmptyInitialConfiguration"
EndSection

giving me

❯ inxi -Gx
Graphics:  Card-1: Intel HD Graphics 520 bus-ID: 00:02.0
           Card-2: NVIDIA GM108GLM [Quadro K620M / Quadro M500M] bus-ID: 06:00.0
           Display Server: X.Org 1.19.1 drivers: modesetting,nvidia Resolution: 2880x1620@59.96hz
           GLX Renderer: Quadro M500M/PCIe/SSE2 GLX Version: 4.5.0 NVIDIA 378.13 Direct Rendering: Yes

Really appreciate your help!
I have to admit, reading the wiki and manpages is a skill one has to learn the hard way smile

Keep it up!

Offline

Board footer

Powered by FluxBB