You are not logged in.
Model: F7D2102
Realtek Adapter: rtl8192cu
I've downloaded the 8192cu-dkms package but when I attempt to install it I run into the following problem.
[madgod@dagon 8192cu-dkms]$ makepkg -si
==> WARNING: A package has already been built, installing existing package...
==> Installing package 8192cu-dkms with pacman -U...
loading packages...
warning: 8192cu-dkms-v4.0.2_9000-11 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...
Packages (1) 8192cu-dkms-v4.0.2_9000-11
Total Installed Size: 5.16 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring [#########################################################################] 100%
(1/1) checking package integrity [#########################################################################] 100%
(1/1) loading package files [#########################################################################] 100%
(1/1) checking for file conflicts [#########################################################################] 100%
(1/1) checking available disk space [#########################################################################] 100%
:: Running pre-transaction hooks...
(1/1) Remove DKMS modules
==> dkms remove 8192cu/v4.0.2_9000 -k 4.9.11-1-ARCH
:: Processing package changes...
(1/1) reinstalling 8192cu-dkms [#########################################################################] 100%
:: Running post-transaction hooks...
(1/2) Install DKMS modules
==> dkms install 8192cu/v4.0.2_9000 -k 4.9.11-1-ARCH
Error! Problems with depmod detected. Automatically uninstalling this module.
DKMS: Install Failed (depmod problems). Module rolled back to built state.
(2/2) Arming ConditionNeedsUpdate...
[madgod@dagon 8192cu-dkms]$
I think (I'm unfamiliar) depmod is trying to point to /lib/modules/'uname -r' instead of /usr/lib/modules/'uname -r', or something is wrong as there is nothing under /lib/modules/
This is a fresh, up-to-date, install. Am I missing something? From what I was reading I was expecting to build & install the adapter, 'modprobe' it, and 'ip link' the interface up. If I need to include any more files let me know.
Edit: Noticed something weird, did I install the wrong package somewhere?
/usr/lib/modules/
$ ls
4.9.11-1-ARCH extramodules-4.9-ARCH
$ uname -r
4.9.8.1-ARCH
Last edited by Madg0d (2017-02-24 23:32:00)
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
Don't truncate log output: post the whole pacman log https://bbs.archlinux.org/viewtopic.php?id=57855
And please paste the output of:
pacman -Q linux
Offline
[madgod@dagon ~]$ pacman -Q linux
linux 4.9.11-1
Will fix truncated log
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
So you have updated your kernel but not rebooted. Or, when you updated /boot wasn't mounted.
Offline
All install was done 10 days ago. Since then I've only installed Plex, and a pacman -Ssy and -Ssu. I think however upon trying to get this belkin adapter installed and working I installed a package I shouldn't have as I'm now in a more serious of a problem, and am typing from my phone.
Upon rebooting it told me it was unable to find 4.9.11-1-ARCH/modules.devname.
Typed with my phone so there may be minor typos.
Warning: /lib/modules/4.9.11-1-ARCH/modules.devname not found - ignoring
starting version 232
ERROR: device 'UUID-f4f728d2-6fc4-4305-b52a-14401174bc6b' .
ERROR: Unable to find root device UUID-f4f728d2-6fc4-4305-b52a-14401174bc6b'
You are being dropped to a recovery shell
Type 'exit' to try and continue booting
sh: can't access tty: job control turned off
Except my USB devices at this point aren't enabled. Should I just reinstall? Its mostly just a basic install.
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
No, just chroot in and make sure /boot is mounted (as well as /, obviously) and then rerun the upgrade.
Paste your fstab once you are back up and running.
Offline
Sorry if this is an easy question but during boot at the moment my USB devices (keyboard) aren't working. So when that recovery shell pops up I cant type exit to try and continue booting or chmod
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
That's because you don't have access to the necessary modules. You need to boot from USB/Live medium and then chroot.
Offline
Trying to do an upgrade after finally chrooting in (noob mistakes) its still giving me an error about lib/modules with depmod
$ pacman -S linux
...
>>> Updating module dependencies. Please wait ...
depmod: ERROR: could not open directory /lib/modules/4.9.11-1-ARCH: No such file or directory
depmod: FATAL: could not search modules: No such file or directory
...
Typing from phone or I'd include more.
/lib/modules exists but is empty
Pacman -Syu worked and returned no errors but had no effect on my system (/boot was mounted)
Tried mv'ing the /usr/lib/modules/4.9.11-1-ARCH to see what effect that'd have but the system is still unable to boot due to that depmod error. So it drops me to the recovery shell where I don't have control over my keyboard. Perhaps I didn't mount right?
I did the follwing steps:
1. Booted from live media (thanks btw, totally forgot)
2. Performed "mount /dev/sda2 /mnt"
3. Chroot'd in
4.performed "mount /Dev/sda2 /boot", / was already mounted
5. Ran a pacman -Syu successfully
6. Rebooted
7. Same error occurred so I went through everything and chroot'd again, tried to perform a pacman -S linux which failed with multiple depmod errors all pointing to no file or directory at /lib/modules/4.9.11-1-ARCH
8. tried mv'ing /usr/lib/modules/4.9.11-1-ARCH to /lib/modules/4.9.11-1-ARCH/
9. Pacman -S linux with the same error as before
10. Just to be sure I rebooted and am still presented with the same error.
I chroot'd in again to get that fstab file.
#
# /etc/fstab: static file system information
#
# <file system> <dir> <type> <options> <dump> <pass>
# UUID=f4f728d2-6fc4-4305-b52a-14401174bc6b
/dev/sda2 / ext4 rw,relatime,data=ordered 0 1
# UUID=0325e51b-21f9-4164-8a8d-401edee39e50
/dev/sda1 none swap defaults 0 0
# /dev/sda2
UUID=f4f728d2-6fc4-4305-b52a-14401174bc6b / ext4 rw,relatime,data=ordered 0 1
# /dev/sda2
UUID=f4f728d2-6fc4-4305-b52a-14401174bc6b /boot ext4 rw,relatime,data=ordered 0 2
Last edited by Madg0d (2017-02-25 03:03:32)
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
[...]
2. Performed "mount /dev/sda2 /mnt"
3. Chroot'd in
4.performed "mount /Dev/sda2 /boot", / was already mounted
[...]... # /dev/sda2 UUID=f4f728d2-6fc4-4305-b52a-14401174bc6b / ext4 rw,relatime,data=ordered 0 1 # /dev/sda2 UUID=f4f728d2-6fc4-4305-b52a-14401174bc6b /boot ext4 rw,relatime,data=ordered 0 2
Why are you mounting that partition twice? If you do not have a separate /boot partition, there is no need to mount anything into /boot.
--edit--
tried mv'ing /usr/lib/modules/4.9.11-1-ARCH to /lib/modules/4.9.11-1-ARCH/
/lib is supposed to be a symlink to /usr/lib, so the move should fail - if not, what is the output of this?
ls -ld /lib
Last edited by ayekat (2017-02-25 09:09:47)
Offline
Madg0d wrote:[...]
2. Performed "mount /dev/sda2 /mnt"
3. Chroot'd in
4.performed "mount /Dev/sda2 /boot", / was already mounted
[...]... # /dev/sda2 UUID=f4f728d2-6fc4-4305-b52a-14401174bc6b / ext4 rw,relatime,data=ordered 0 1 # /dev/sda2 UUID=f4f728d2-6fc4-4305-b52a-14401174bc6b /boot ext4 rw,relatime,data=ordered 0 2
Why are you mounting that partition twice? If you do not have a separate /boot partition, there is no need to mount anything into /boot.
--edit--
tried mv'ing /usr/lib/modules/4.9.11-1-ARCH to /lib/modules/4.9.11-1-ARCH/
/lib is supposed to be a symlink to /usr/lib, so the move should fail - if not, what is the output of this?
ls -ld /lib
$ ls -ld /lib
drwxr-xr-x 3 root root 4096 Feb 24 17:44 /lib
Is this the correct output?
JasonWRyan suggested mounting boot may be necessary so I was unsure, and as it didn't return any errors I figured that was the right 'boot' to be mounting.
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
$ ls -ld /lib drwxr-xr-x 3 root root 4096 Feb 24 17:44 /lib
Is this the correct output?
No
$ ls -ld /lib
lrwxrwxrwx 1 root root 7 Dec 5 23:43 /lib -> usr/lib
Edit:
After chrooting in what is the output of
$ pacman -Qkk filesystem
Last edited by loqs (2017-02-25 18:00:08)
Offline
H
Madg0d wrote:$ ls -ld /lib drwxr-xr-x 3 root root 4096 Feb 24 17:44 /lib
Is this the correct output?
No
$ ls -ld /lib lrwxrwxrwx 1 root root 7 Dec 5 23:43 /lib -> usr/lib
Edit:
After chrooting in what is the output of$ pacman -Qkk filesystem
I had a hunch
# pacman -Qkk filesystem
warning: filesystem: /lib (File type mismatch)
backup file: filesystem /etc/fstab (Modification time mismatch)
backup file: filesystem /etc/fstab (Size mismatch)
backup file: filesystem /etc/group (Modification time mismatch)
backup file: filesystem /etc/group (Size mismatch)
backup file: filesystem /etc/gshadow (Modification time mismatch)
backup file: filesystem /etc/gshadow (Size mismatch)
backup file: filesystem /etc/hosts (Modification time mismatch)
backup file: filesystem /etc/hosts (Size mismatch)
warning: filesystem: /etc/mtab (Symlink path mismatch)
warning: filesystem: /etc/mtab (Modification time mismatch)
backup file: filesystem /etc/passwd (Modification time mismatch)
backup file: filesystem /etc/passwd (Size mismatch)
backup file: filesystem /etc/resolve.conf (Modification time mismatch)
backup file: filesystem /etc/resolve.conf (Size mismatch)
backup file: filesystem /etc/shadow (Modification type mismatch)
backup file: filesystem /etc/shadow (Size mismatch)
filesystem: 88 total files, 2 altered files
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
In the chroot is /usr/lib/ currently empty? If it is it might be a case of moving /lib back to /usr/lib and fixing the symlink. I would want a second opinion on this before trying anything else.
Also do you have a backup of all your data?
Offline
Sorry for the n00b question, but how do you fix symlinks? (A link to the right section works). Tried googling could only figure out how to list them. There's nothing pointing/lib to /usr/lib. No backup, forgot to ghost after I set my system up. Wouldn't be a huge loss however.
Edit: /usr/lib isn't empty. usr/lib/modules Contains 4.9.11-1-ARCH
Last edited by Madg0d (2017-02-25 19:29:32)
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
In the chroot what does /lib/modules contain?
Offline
# ls usr/lib/modules
4.9.11-1-ARCH extramodules-4.9-ARCH
# ls lib/modules
4.6.3-1-ARCH 4.9.11-1-ARCH
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
This definitely needs review but to me should resolve most of the issues
# mv /lib/modules /lib/modules.bak
# mv /usr/lib/modules /lib
# mv /usr/lib /usr/lib.bak
# mv /lib /usr/lib
# pacman -Syu filesystem linux
Offline
This definitely needs review but to me should resolve most of the issues
# mv /lib/modules /lib/modules.bak # mv /usr/lib/modules /lib # mv /usr/lib /usr/lib.bak # mv /lib /usr/lib # pacman -Syu filesystem linux
Think there may have been an issue with those commands. After: "mv /usr/lib /usr/lib.back"
When I went to enter the fourth line it told me it couldn't find the mv file or directory. Restored the baks though successfully. However I moved the lib/modules directory to the /usr/lib/modules directory and ran the update command. And now its telling me there isn't enough space to write to /etc/resolve.conf
I should however have almost a TB free.
/dev/sda2 has 869685276 blocks available
Still typing from phone but here's the relevant info, no anomalies prior
# pacman -Syu filesystem linux
...
(3/3) Checking available disk space
error: Partition /etc/resolve.conf too full: 3277 blocks needed, 0 blocks free
error: not enough free disk space
error: failed to commit transaction (not enough free disk space)
Errors occurred, no packages were upgraded.
Edit: if I type something like use instead of usr that's usually my phones autocorrect
Last edited by Madg0d (2017-02-25 21:01:14)
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
"mv /use/lib /use/lib.back"
Was this a typo /use instead of /usr?
Agreed there may well be an issue with the commands, I was hoping someone would review the commands before you used them.
Before running the update I was hoping /lib would not exist so reinstalling the filesystem package could create it.
The duplicate or unknown files would have been moved to /usr/lib.bak and /usr/lib/modules.bak
No idea what caused the update to fail if there really is free space.
Offline
Madg0d wrote:"mv /use/lib /use/lib.back"
Was this a typo /use instead of /usr?
Agreed there may well be an issue with the commands, I was hoping someone would review the commands before you used them.
Before running the update I was hoping /lib would not exist so reinstalling the filesystem package could create it.
The duplicate or unknown files would have been moved to /usr/lib.bak and /usr/lib/modules.bak
No idea what caused the update to fail if there really is free space.
Yeah that was a typo. I'll let someone review those commands. I'll poke around more and try and figure out why its telling me there isn't enough space
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
# mv /lib/modules /lib/modules.bak # mv /usr/lib/modules /lib # mv /usr/lib /usr/lib.bak #This line is incorrect and will break things will post fix shortly # mv /lib /usr/lib # pacman -Syu filesystem linux
Edit:
Fixed commands
# mv /lib /lib.bak
# pacman -Syu filesystem linux
tested using
$ mkdir madg0d
$ sudo pacstrap -d madg0d
==> Creating install root at madg0d
==> Installing packages to madg0d
:: Synchronising package databases...
core 123.3 KiB 1370K/s 00:00 [######################] 100%
extra 1677.7 KiB 7.03M/s 00:00 [######################] 100%
community 3.7 MiB 3.67M/s 00:01 [######################] 100%
:: There are 50 members in group base:
:: Repository core
1) bash 2) bzip2 3) coreutils 4) cryptsetup 5) device-mapper 6) dhcpcd
7) diffutils 8) e2fsprogs 9) file 10) filesystem 11) findutils 12) gawk
13) gcc-libs 14) gettext 15) glibc 16) grep 17) gzip 18) inetutils
19) iproute2 20) iputils 21) jfsutils 22) less 23) licenses 24) linux
25) logrotate 26) lvm2 27) man-db 28) man-pages 29) mdadm 30) nano
31) netctl 32) pacman 33) pciutils 34) pcmciautils 35) perl
36) procps-ng 37) psmisc 38) reiserfsprogs 39) s-nail 40) sed
41) shadow 42) sysfsutils 43) systemd-sysvcompat 44) tar 45) texinfo
46) usbutils 47) util-linux 48) vi 49) which 50) xfsprogs
Enter a selection (default=all):
resolving dependencies...
looking for conflicting packages...
Packages (128) acl-2.2.52-3 archlinux-keyring-20170104-1 attr-2.4.47-2
ca-certificates-20160507-1 ca-certificates-cacert-20140824-4
ca-certificates-mozilla-3.29.1-1
ca-certificates-utils-20160507-1 cracklib-2.9.6-1
curl-7.52.1-2 db-5.3.28-3 dbus-1.10.16-1 expat-2.2.0-2
gdbm-1.12-2 glib2-2.50.3-1 gmp-6.1.2-1 gnupg-2.1.18-2
gnutls-3.5.9-1 gpgme-1.7.1-2 groff-1.22.3-7 hwids-20161103-1
iana-etc-20161101-1 icu-58.2-1 iptables-1.6.0-1 kbd-2.0.4-1
keyutils-1.5.9-1 kmod-23-1 krb5-1.13.7-1 libaio-0.3.110-1
libarchive-3.3.0-1 libassuan-2.4.3-1 libcap-2.25-1
libelf-0.168-1 libffi-3.2.1-2 libgcrypt-1.7.6-1
libgpg-error-1.26-1 libidn-1.33-1 libksba-1.3.4-2
libldap-2.4.44-3 libmnl-1.0.4-1 libnftnl-1.0.7-1
libpipeline-1.4.1-1 libpsl-0.17.0-1 libsasl-2.1.26-8
libseccomp-2.3.1-1 libsecret-0.18.5-1 libssh2-1.8.0-1
libsystemd-232-8 libtasn1-4.10-1 libtirpc-1.0.1-2
libunistring-0.9.7-1 libusb-1.0.21-1 libutil-linux-2.29.1-1
linux-api-headers-4.7-1 linux-firmware-20170217.12987ca-1
lz4-1:1.7.5-1 lzo-2.09-1 mkinitcpio-22-1
mkinitcpio-busybox-1.25.1-1 mpfr-3.1.5.p2-1
ncurses-6.0+20170128-1 nettle-3.3-1 npth-1.3-1
openresolv-3.8.1-1 openssl-1.0.2.k-1 p11-kit-0.23.2-1
pacman-mirrorlist-20170211-1 pam-1.3.0-1 pambase-20130928-1
pcre-8.40-1 pinentry-1.0.0-1 popt-1.16-8 readline-7.0.003-1
sqlite-3.17.0-1 systemd-232-8 thin-provisioning-tools-0.6.3-1
tzdata-2016j-1 xz-5.2.3-1 zlib-1:1.2.11-1 bash-4.4.012-2
bzip2-1.0.6-6 coreutils-8.26-1 cryptsetup-1.7.3-1
device-mapper-2.02.168-1 dhcpcd-6.11.5-1 diffutils-3.5-1
e2fsprogs-1.43.4-1 file-5.30-1 filesystem-2016.12-2
findutils-4.6.0-2 gawk-4.1.4-2 gcc-libs-6.3.1-1
gettext-0.19.8.1-2 glibc-2.24-2 grep-3.0-1 gzip-1.8-2
inetutils-1.9.4-5 iproute2-4.10.0-1 iputils-20161105.1f2bb12-1
jfsutils-1.1.15-4 less-487-1 licenses-20140629-1
linux-4.9.11-1 logrotate-3.11.0-1 lvm2-2.02.168-1
man-db-2.7.6.1-2 man-pages-4.09-1 mdadm-3.4-1 nano-2.7.5-1
netctl-1.12-2 pacman-5.0.1-4 pciutils-3.5.2-1
pcmciautils-018-7 perl-5.24.1-1 procps-ng-3.3.12-1
psmisc-22.21-3 reiserfsprogs-3.6.25-1 s-nail-14.8.16-1
sed-4.4-1 shadow-4.4-3 sysfsutils-2.1.0-9
systemd-sysvcompat-232-8 tar-1.29-2 texinfo-6.3-1
usbutils-008-1 util-linux-2.29.1-1 vi-1:070224-2 which-2.21-2
xfsprogs-4.9.0-1
Total Download Size: 205.56 MiB
Total Installed Size: 694.66 MiB
:: Proceed with installation? [Y/n]
:: Retrieving packages...
linux-api-headers-4... 810.7 KiB 2.53M/s 00:00 [######################] 100%
tzdata-2016j-1-any 216.4 KiB 3.71M/s 00:00 [######################] 100%
iana-etc-20161101-1-any 355.6 KiB 3.16M/s 00:00 [######################] 100%
filesystem-2016.12-... 9.7 KiB 0.00B/s 00:00 [######################] 100%
glibc-2.24-2-x86_64 8.1 MiB 4.09M/s 00:02 [######################] 100%
gcc-libs-6.3.1-1-x86_64 14.9 MiB 6.07M/s 00:02 [######################] 100%
ncurses-6.0+2017012... 1032.1 KiB 7.36M/s 00:00 [######################] 100%
readline-7.0.003-1-... 294.7 KiB 8.46M/s 00:00 [######################] 100%
bash-4.4.012-2-x86_64 1417.7 KiB 7.40M/s 00:00 [######################] 100%
bzip2-1.0.6-6-x86_64 52.8 KiB 12.9M/s 00:00 [######################] 100%
attr-2.4.47-2-x86_64 70.0 KiB 17.1M/s 00:00 [######################] 100%
acl-2.2.52-3-x86_64 132.0 KiB 32.2M/s 00:00 [######################] 100%
gmp-6.1.2-1-x86_64 408.5 KiB 9.28M/s 00:00 [######################] 100%
libcap-2.25-1-x86_64 37.9 KiB 0.00B/s 00:00 [######################] 100%
gdbm-1.12-2-x86_64 135.7 KiB 22.1M/s 00:00 [######################] 100%
db-5.3.28-3-x86_64 1097.6 KiB 8.25M/s 00:00 [######################] 100%
perl-5.24.1-1-x86_64 13.2 MiB 8.27M/s 00:02 [######################] 100%
openssl-1.0.2.k-1-x... 2.7 MiB 9.31M/s 00:00 [######################] 100%
coreutils-8.26-1-x86_64 2.2 MiB 10.8M/s 00:00 [######################] 100%
libgpg-error-1.26-1... 145.6 KiB 23.7M/s 00:00 [######################] 100%
libgcrypt-1.7.6-1-x... 467.9 KiB 10.6M/s 00:00 [######################] 100%
lz4-1:1.7.5-1-x86_64 82.7 KiB 26.9M/s 00:00 [######################] 100%
xz-5.2.3-1-x86_64 229.1 KiB 22.4M/s 00:00 [######################] 100%
libsystemd-232-8-x86_64 358.1 KiB 8.74M/s 00:00 [######################] 100%
expat-2.2.0-2-x86_64 76.3 KiB 18.6M/s 00:00 [######################] 100%
dbus-1.10.16-1-x86_64 273.1 KiB 19.0M/s 00:00 [######################] 100%
libmnl-1.0.4-1-x86_64 10.5 KiB 0.00B/s 00:00 [######################] 100%
libnftnl-1.0.7-1-x86_64 59.9 KiB 19.5M/s 00:00 [######################] 100%
iptables-1.6.0-1-x86_64 304.1 KiB 18.6M/s 00:00 [######################] 100%
zlib-1:1.2.11-1-x86_64 86.4 KiB 21.1M/s 00:00 [######################] 100%
cracklib-2.9.6-1-x86_64 249.9 KiB 18.8M/s 00:00 [######################] 100%
libutil-linux-2.29.... 317.5 KiB 10.3M/s 00:00 [######################] 100%
e2fsprogs-1.43.4-1-... 959.5 KiB 10.8M/s 00:00 [######################] 100%
libsasl-2.1.26-8-x86_64 136.7 KiB 44.5M/s 00:00 [######################] 100%
libldap-2.4.44-3-x86_64 286.9 KiB 21.6M/s 00:00 [######################] 100%
keyutils-1.5.9-1-x86_64 76.5 KiB 24.9M/s 00:00 [######################] 100%
krb5-1.13.7-1-x86_64 1100.1 KiB 10.7M/s 00:00 [######################] 100%
libtirpc-1.0.1-2-x86_64 171.5 KiB 16.8M/s 00:00 [######################] 100%
pambase-20130928-1-any 1708.0 B 0.00B/s 00:00 [######################] 100%
pam-1.3.0-1-x86_64 609.7 KiB 12.7M/s 00:00 [######################] 100%
kbd-2.0.4-1-x86_64 1119.9 KiB 9.68M/s 00:00 [######################] 100%
kmod-23-1-x86_64 109.1 KiB 35.5M/s 00:00 [######################] 100%
hwids-20161103-1-any 337.6 KiB 25.4M/s 00:00 [######################] 100%
libidn-1.33-1-x86_64 206.9 KiB 28.9M/s 00:00 [######################] 100%
libelf-0.168-1-x86_64 372.6 KiB 9.83M/s 00:00 [######################] 100%
libseccomp-2.3.1-1-... 66.6 KiB 16.3M/s 00:00 [######################] 100%
shadow-4.4-3-x86_64 1060.6 KiB 11.9M/s 00:00 [######################] 100%
util-linux-2.29.1-1... 1832.6 KiB 11.9M/s 00:00 [######################] 100%
systemd-232-8-x86_64 3.7 MiB 11.0M/s 00:00 [######################] 100%
device-mapper-2.02.... 255.9 KiB 25.0M/s 00:00 [######################] 100%
popt-1.16-8-x86_64 65.5 KiB 21.3M/s 00:00 [######################] 100%
cryptsetup-1.7.3-1-... 239.0 KiB 23.3M/s 00:00 [######################] 100%
dhcpcd-6.11.5-1-x86_64 156.8 KiB 21.9M/s 00:00 [######################] 100%
diffutils-3.5-1-x86_64 273.0 KiB 26.7M/s 00:00 [######################] 100%
file-5.30-1-x86_64 257.0 KiB 25.1M/s 00:00 [######################] 100%
findutils-4.6.0-2-x... 420.7 KiB 13.7M/s 00:00 [######################] 100%
mpfr-3.1.5.p2-1-x86_64 254.5 KiB 24.9M/s 00:00 [######################] 100%
gawk-4.1.4-2-x86_64 987.1 KiB 11.5M/s 00:00 [######################] 100%
pcre-8.40-1-x86_64 922.5 KiB 11.7M/s 00:00 [######################] 100%
libffi-3.2.1-2-x86_64 31.5 KiB 10.3M/s 00:00 [######################] 100%
glib2-2.50.3-1-x86_64 2.2 MiB 12.2M/s 00:00 [######################] 100%
libunistring-0.9.7-... 491.1 KiB 14.5M/s 00:00 [######################] 100%
gettext-0.19.8.1-2-... 2026.9 KiB 14.1M/s 00:00 [######################] 100%
grep-3.0-1-x86_64 202.7 KiB 19.8M/s 00:00 [######################] 100%
less-487-1-x86_64 93.6 KiB 15.2M/s 00:00 [######################] 100%
gzip-1.8-2-x86_64 75.8 KiB 24.7M/s 00:00 [######################] 100%
inetutils-1.9.4-5-x... 285.8 KiB 16.4M/s 00:00 [######################] 100%
iproute2-4.10.0-1-x... 623.8 KiB 12.2M/s 00:00 [######################] 100%
sysfsutils-2.1.0-9-... 30.2 KiB 7.37M/s 00:00 [######################] 100%
iputils-20161105.1f... 71.1 KiB 17.4M/s 00:00 [######################] 100%
jfsutils-1.1.15-4-x... 167.5 KiB 23.4M/s 00:00 [######################] 100%
licenses-20140629-1-any 62.0 KiB 0.00B/s 00:00 [######################] 100%
linux-firmware-2017... 40.7 MiB 15.6M/s 00:03 [######################] 100%
mkinitcpio-busybox-... 157.5 KiB 25.6M/s 00:00 [######################] 100%
lzo-2.09-1-x86_64 79.4 KiB 25.9M/s 00:00 [######################] 100%
libarchive-3.3.0-1-... 606.6 KiB 19.7M/s 00:00 [######################] 100%
mkinitcpio-22-1-any 38.9 KiB 9.50M/s 00:00 [######################] 100%
linux-4.9.11-1-x86_64 60.1 MiB 17.2M/s 00:03 [######################] 100%
logrotate-3.11.0-1-... 37.2 KiB 9.07M/s 00:00 [######################] 100%
libaio-0.3.110-1-x86_64 4.4 KiB 0.00B/s 00:00 [######################] 100%
thin-provisioning-t... 372.6 KiB 21.4M/s 00:00 [######################] 100%
lvm2-2.02.168-1-x86_64 1131.9 KiB 16.5M/s 00:00 [######################] 100%
groff-1.22.3-7-x86_64 1824.6 KiB 14.8M/s 00:00 [######################] 100%
libpipeline-1.4.1-1... 36.2 KiB 0.00B/s 00:00 [######################] 100%
man-db-2.7.6.1-2-x86_64 756.1 KiB 22.4M/s 00:00 [######################] 100%
man-pages-4.09-1-any 5.6 MiB 15.6M/s 00:00 [######################] 100%
mdadm-3.4-1-x86_64 384.5 KiB 22.1M/s 00:00 [######################] 100%
nano-2.7.5-1-x86_64 407.3 KiB 24.9M/s 00:00 [######################] 100%
openresolv-3.8.1-1-any 20.8 KiB 0.00B/s 00:00 [######################] 100%
netctl-1.12-2-any 36.8 KiB 12.0M/s 00:00 [######################] 100%
libtasn1-4.10-1-x86_64 116.2 KiB 37.8M/s 00:00 [######################] 100%
p11-kit-0.23.2-1-x86_64 265.5 KiB 19.9M/s 00:00 [######################] 100%
ca-certificates-uti... 7.6 KiB 0.00B/s 00:00 [######################] 100%
ca-certificates-moz... 361.4 KiB 27.2M/s 00:00 [######################] 100%
ca-certificates-cac... 7.1 KiB 0.00B/s 00:00 [######################] 100%
ca-certificates-201... 1864.0 B 0.00B/s 00:00 [######################] 100%
libssh2-1.8.0-1-x86_64 179.4 KiB 17.5M/s 00:00 [######################] 100%
icu-58.2-1-x86_64 8.1 MiB 16.3M/s 00:00 [######################] 100%
libpsl-0.17.0-1-x86_64 49.3 KiB 0.00B/s 00:00 [######################] 100%
curl-7.52.1-2-x86_64 850.5 KiB 10.4M/s 00:00 [######################] 100%
npth-1.3-1-x86_64 13.4 KiB 0.00B/s 00:00 [######################] 100%
libksba-1.3.4-2-x86_64 114.6 KiB 2.24M/s 00:00 [######################] 100%
libassuan-2.4.3-1-x... 84.6 KiB 2.75M/s 00:00 [######################] 100%
libsecret-0.18.5-1-... 195.0 KiB 942K/s 00:00 [######################] 100%
pinentry-1.0.0-1-x86_64 98.1 KiB 3.55M/s 00:00 [######################] 100%
nettle-3.3-1-x86_64 321.7 KiB 3.61M/s 00:00 [######################] 100%
gnutls-3.5.9-1-x86_64 2.2 MiB 4.54M/s 00:00 [######################] 100%
sqlite-3.17.0-1-x86_64 1240.8 KiB 4.99M/s 00:00 [######################] 100%
gnupg-2.1.18-2-x86_64 2002.6 KiB 5.43M/s 00:00 [######################] 100%
gpgme-1.7.1-2-x86_64 364.6 KiB 5.65M/s 00:00 [######################] 100%
pacman-mirrorlist-2... 5.1 KiB 0.00B/s 00:00 [######################] 100%
archlinux-keyring-2... 604.5 KiB 6.09M/s 00:00 [######################] 100%
pacman-5.0.1-4-x86_64 732.0 KiB 5.81M/s 00:00 [######################] 100%
pciutils-3.5.2-1-x86_64 82.0 KiB 26.7M/s 00:00 [######################] 100%
pcmciautils-018-7-x... 19.7 KiB 0.00B/s 00:00 [######################] 100%
procps-ng-3.3.12-1-... 299.5 KiB 7.31M/s 00:00 [######################] 100%
psmisc-22.21-3-x86_64 101.3 KiB 14.1M/s 00:00 [######################] 100%
reiserfsprogs-3.6.2... 201.0 KiB 7.27M/s 00:00 [######################] 100%
s-nail-14.8.16-1-x86_64 311.1 KiB 7.59M/s 00:00 [######################] 100%
sed-4.4-1-x86_64 174.0 KiB 6.29M/s 00:00 [######################] 100%
systemd-sysvcompat-... 7.3 KiB 0.00B/s 00:00 [######################] 100%
tar-1.29-2-x86_64 673.9 KiB 6.58M/s 00:00 [######################] 100%
texinfo-6.3-1-x86_64 1170.9 KiB 6.35M/s 00:00 [######################] 100%
libusb-1.0.21-1-x86_64 54.0 KiB 17.6M/s 00:00 [######################] 100%
usbutils-008-1-x86_64 61.3 KiB 15.0M/s 00:00 [######################] 100%
vi-1:070224-2-x86_64 148.0 KiB 20.6M/s 00:00 [######################] 100%
which-2.21-2-x86_64 15.5 KiB 0.00B/s 00:00 [######################] 100%
xfsprogs-4.9.0-1-x86_64 806.1 KiB 6.40M/s 00:00 [######################] 100%
(128/128) checking keys in keyring [######################] 100%
(128/128) checking package integrity [######################] 100%
(128/128) loading package files [######################] 100%
(128/128) checking for file conflicts [######################] 100%
(128/128) checking available disk space [######################] 100%
:: Processing package changes...
( 1/128) installing linux-api-headers [######################] 100%
( 2/128) installing tzdata [######################] 100%
( 3/128) installing iana-etc [######################] 100%
( 4/128) installing filesystem [######################] 100%
( 5/128) installing glibc [######################] 100%
( 6/128) installing gcc-libs [######################] 100%
( 7/128) installing ncurses [######################] 100%
( 8/128) installing readline [######################] 100%
( 9/128) installing bash [######################] 100%
Optional dependencies for bash
bash-completion: for tab completion
( 10/128) installing bzip2 [######################] 100%
( 11/128) installing attr [######################] 100%
( 12/128) installing acl [######################] 100%
( 13/128) installing gmp [######################] 100%
( 14/128) installing libcap [######################] 100%
( 15/128) installing gdbm [######################] 100%
( 16/128) installing db [######################] 100%
( 17/128) installing perl [######################] 100%
( 18/128) installing openssl [######################] 100%
Optional dependencies for openssl
ca-certificates [pending]
( 19/128) installing coreutils [######################] 100%
( 20/128) installing libgpg-error [######################] 100%
( 21/128) installing libgcrypt [######################] 100%
( 22/128) installing lz4 [######################] 100%
( 23/128) installing xz [######################] 100%
( 24/128) installing libsystemd [######################] 100%
( 25/128) installing expat [######################] 100%
( 26/128) installing dbus [######################] 100%
( 27/128) installing libmnl [######################] 100%
( 28/128) installing libnftnl [######################] 100%
( 29/128) installing iptables [######################] 100%
( 30/128) installing zlib [######################] 100%
( 31/128) installing cracklib [######################] 100%
( 32/128) installing libutil-linux [######################] 100%
( 33/128) installing e2fsprogs [######################] 100%
( 34/128) installing libsasl [######################] 100%
( 35/128) installing libldap [######################] 100%
( 36/128) installing keyutils [######################] 100%
( 37/128) installing krb5 [######################] 100%
( 38/128) installing libtirpc [######################] 100%
( 39/128) installing pambase [######################] 100%
( 40/128) installing pam [######################] 100%
( 41/128) installing kbd [######################] 100%
( 42/128) installing kmod [######################] 100%
( 43/128) installing hwids [######################] 100%
( 44/128) installing libidn [######################] 100%
( 45/128) installing libelf [######################] 100%
( 46/128) installing libseccomp [######################] 100%
( 47/128) installing shadow [######################] 100%
( 48/128) installing util-linux [######################] 100%
Optional dependencies for util-linux
python: python bindings to libmount
( 49/128) installing systemd [######################] 100%
Initializing machine ID from random generator.
Created symlink /etc/systemd/system/getty.target.wants/getty@tty1.service → /usr/lib/systemd/system/getty@.service.
Created symlink /etc/systemd/system/multi-user.target.wants/remote-fs.target → /usr/lib/systemd/system/remote-fs.target.
:: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your
bootloader to replace sysvinit with systemd, or install systemd-sysvcompat
Optional dependencies for systemd
cryptsetup: required for encrypted block devices [pending]
libmicrohttpd: remote journald capabilities
quota-tools: kernel-level quota management
systemd-sysvcompat: symlink package to provide sysvinit binaries [pending]
polkit: allow administration as unprivileged user
( 50/128) installing device-mapper [######################] 100%
( 51/128) installing popt [######################] 100%
( 52/128) installing cryptsetup [######################] 100%
( 53/128) installing dhcpcd [######################] 100%
Optional dependencies for dhcpcd
openresolv: resolvconf support [pending]
( 54/128) installing diffutils [######################] 100%
( 55/128) installing file [######################] 100%
( 56/128) installing findutils [######################] 100%
( 57/128) installing mpfr [######################] 100%
( 58/128) installing gawk [######################] 100%
( 59/128) installing pcre [######################] 100%
( 60/128) installing libffi [######################] 100%
( 61/128) installing glib2 [######################] 100%
Optional dependencies for glib2
python: for gdbus-codegen and gtester-report
libelf: gresource inspection tool [installed]
( 62/128) installing libunistring [######################] 100%
( 63/128) installing gettext [######################] 100%
Optional dependencies for gettext
git: for autopoint infrastructure updates
( 64/128) installing grep [######################] 100%
( 65/128) installing less [######################] 100%
( 66/128) installing gzip [######################] 100%
( 67/128) installing inetutils [######################] 100%
( 68/128) installing iproute2 [######################] 100%
Optional dependencies for iproute2
linux-atm: ATM support
( 69/128) installing sysfsutils [######################] 100%
( 70/128) installing iputils [######################] 100%
Optional dependencies for iputils
xinetd: for tftpd
( 71/128) installing jfsutils [######################] 100%
( 72/128) installing licenses [######################] 100%
( 73/128) installing linux-firmware [######################] 100%
( 74/128) installing mkinitcpio-busybox [######################] 100%
( 75/128) installing lzo [######################] 100%
( 76/128) installing libarchive [######################] 100%
( 77/128) installing mkinitcpio [######################] 100%
Optional dependencies for mkinitcpio
xz: Use lzma or xz compression for the initramfs image [installed]
bzip2: Use bzip2 compression for the initramfs image [installed]
lzop: Use lzo compression for the initramfs image
lz4: Use lz4 compression for the initramfs image [installed]
mkinitcpio-nfs-utils: Support for root filesystem on NFS
( 78/128) installing linux [######################] 100%
>>> Updating module dependencies. Please wait ...
Optional dependencies for linux
crda: to set the correct wireless channels of your country
( 79/128) installing logrotate [######################] 100%
( 80/128) installing libaio [######################] 100%
( 81/128) installing thin-provisioning-tools [######################] 100%
( 82/128) installing lvm2 [######################] 100%
( 83/128) installing groff [######################] 100%
Optional dependencies for groff
netpbm: for use together with man -H command interaction in browsers
psutils: for use together with man -H command interaction in browsers
libxaw: for gxditview
( 84/128) installing libpipeline [######################] 100%
( 85/128) installing man-db [######################] 100%
Optional dependencies for man-db
gzip [installed]
( 86/128) installing man-pages [######################] 100%
( 87/128) installing mdadm [######################] 100%
( 88/128) installing nano [######################] 100%
( 89/128) installing openresolv [######################] 100%
( 90/128) installing netctl [######################] 100%
Optional dependencies for netctl
dialog: for the menu based wifi assistant
dhclient: for DHCP support (or dhcpcd)
dhcpcd: for DHCP support (or dhclient) [installed]
wpa_supplicant: for wireless networking support
ifplugd: for automatic wired connections through netctl-ifplugd
wpa_actiond: for automatic wireless connections through netctl-auto
ppp: for PPP connections
openvswitch: for Open vSwitch connections
( 91/128) installing libtasn1 [######################] 100%
( 92/128) installing p11-kit [######################] 100%
( 93/128) installing ca-certificates-utils [######################] 100%
( 94/128) installing ca-certificates-mozilla [######################] 100%
( 95/128) installing ca-certificates-cacert [######################] 100%
( 96/128) installing ca-certificates [######################] 100%
( 97/128) installing libssh2 [######################] 100%
( 98/128) installing icu [######################] 100%
( 99/128) installing libpsl [######################] 100%
(100/128) installing curl [######################] 100%
(101/128) installing npth [######################] 100%
(102/128) installing libksba [######################] 100%
(103/128) installing libassuan [######################] 100%
(104/128) installing libsecret [######################] 100%
Optional dependencies for libsecret
gnome-keyring: key storage service (or use any other service implementing
org.freedesktop.secrets)
(105/128) installing pinentry [######################] 100%
Optional dependencies for pinentry
gtk2: gtk2 backend
qt5-base: qt backend
gcr: gnome3 backend
(106/128) installing nettle [######################] 100%
(107/128) installing gnutls [######################] 100%
Optional dependencies for gnutls
guile: for use with Guile bindings
(108/128) installing sqlite [######################] 100%
(109/128) installing gnupg [######################] 100%
Optional dependencies for gnupg
libldap: gpg2keys_ldap [installed]
libusb-compat: scdaemon
(110/128) installing gpgme [######################] 100%
(111/128) installing pacman-mirrorlist [######################] 100%
(112/128) installing archlinux-keyring [######################] 100%
(113/128) installing pacman [######################] 100%
(114/128) installing pciutils [######################] 100%
(115/128) installing pcmciautils [######################] 100%
(116/128) installing procps-ng [######################] 100%
(117/128) installing psmisc [######################] 100%
(118/128) installing reiserfsprogs [######################] 100%
(119/128) installing s-nail [######################] 100%
Optional dependencies for s-nail
smtp-forwarder: for sending mail
(120/128) installing sed [######################] 100%
(121/128) installing systemd-sysvcompat [######################] 100%
(122/128) installing tar [######################] 100%
(123/128) installing texinfo [######################] 100%
(124/128) installing libusb [######################] 100%
(125/128) installing usbutils [######################] 100%
Optional dependencies for usbutils
python2: for lsusb.py usage
coreutils: for lsusb.py usage [installed]
(126/128) installing vi [######################] 100%
Optional dependencies for vi
s-nail: used by the preserve command for notification [installed]
(127/128) installing which [######################] 100%
(128/128) installing xfsprogs [######################] 100%
:: Running post-transaction hooks...
(1/7) Updating linux initcpios
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 4.9.11-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 4.9.11-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: wd719x
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
(2/7) Updating udev hardware database...
(3/7) Updating system user accounts...
(4/7) Creating temporary files...
(5/7) Arming ConditionNeedsUpdate...
(6/7) Updating the info directory file...
(7/7) Rebuilding certificate stores...
$ sudo arch-chroot madg0d/
[root@localhost /]# rm lib
[root@localhost /]# mkdir lib
[root@localhost /]# cp -r /usr/lib/modules/
[root@localhost /]# cp -r /usr/lib/modules /lib
[root@localhost /]# cd /lib/modules/
[root@localhost modules]# ls
4.9.11-1-ARCH extramodules-4.9-ARCH
[root@localhost modules]# rm -rf extramodules-4.9-ARCH/
[root@localhost modules]# cp -r 4.9.11-1-ARCH 4.6.3-1-ARCH
[root@localhost modules]# cd /
[root@localhost /]# ls /lib
modules
[root@localhost /]# ls /lib/modules/
4.6.3-1-ARCH 4.9.11-1-ARCH
[root@localhost /]# mv lib lib.bak
[root@localhost /]# pacman -Syu filesystem linux
:: Synchronizing package databases...
core is up to date
extra is up to date
community is up to date
warning: filesystem-2016.12-2 is up to date -- reinstalling
warning: linux-4.9.11-1 is up to date -- reinstalling
:: Starting full system upgrade...
resolving dependencies...
looking for conflicting packages...
Packages (2) filesystem-2016.12-2 linux-4.9.11-1
Total Installed Size: 79.56 MiB
Net Upgrade Size: 0.00 MiB
:: Proceed with installation? [Y/n] y
(2/2) checking keys in keyring [######################] 100%
(2/2) checking package integrity [######################] 100%
(2/2) loading package files [######################] 100%
(2/2) checking for file conflicts [######################] 100%
(2/2) checking available disk space [######################] 100%
warning: could not get file information for lib
:: Processing package changes...
(1/2) reinstalling filesystem [######################] 100%
(2/2) reinstalling linux [######################] 100%
>>> Updating module dependencies. Please wait ...
:: Running post-transaction hooks...
(1/2) Updating linux initcpios
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
==> Starting build: 4.9.11-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [autodetect]
-> Running build hook: [modconf]
-> Running build hook: [block]
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
==> Image generation successful
==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
-> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
==> Starting build: 4.9.11-1-ARCH
-> Running build hook: [base]
-> Running build hook: [udev]
-> Running build hook: [modconf]
-> Running build hook: [block]
==> WARNING: Possibly missing firmware for module: aic94xx
==> WARNING: Possibly missing firmware for module: wd719x
-> Running build hook: [filesystems]
-> Running build hook: [keyboard]
-> Running build hook: [fsck]
==> Generating module dependencies
==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
==> Image generation successful
(2/2) Arming ConditionNeedsUpdate...
[root@localhost /]#
Last edited by loqs (2017-02-25 23:24:50)
Offline
Commands are good but I still have the issue with the etc/resolve.conf telling me that its too full.
Also when I mv /lib to lib.bak I get the following warning after running pacman. It doesn't create lib automatically build lib.
warning: could not get file information for lib
madg0d, you keep hitting "report", when I think you mean to hit "quote". Reports get sent to the mod team, which is why the replies weren't showing up.
Sakura:-
Mobo: MSI MAG X570S TORPEDO MAX // Processor: AMD Ryzen 9 5950X @4.9GHz // GFX: AMD Radeon RX 5700 XT // RAM: 32GB (4x 8GB) Corsair DDR4 (@ 3000MHz) // Storage: 1x 3TB HDD, 6x 1TB SSD, 2x 120GB SSD, 1x 275GB M2 SSD
Making lemonade from lemons since 2015.
Offline
Commands are good but I still have the issue with the etc/resolve.conf telling me that its too full.
Also when I mv /lib to lib.bak I get the following warning after running pacman. It doesn't create lib automatically build lib.
warning: could not get file information for lib
Also: apparently I submitted this above reply as a report for this thread twice. So sorry for the mods who will have to cringe at that lol I'm not a fan of mobile
Edit: Sorry wormzy
Last edited by Madg0d (2017-02-25 23:54:29)
Sheogorath,
Fourth Corner of the House of Troubles,
Lord of the Never-There,
Sovereign of the Shivering Isles
Offline
What is the contents of /usr/lib in the chroot?
Edit:
I am wondering if following my first set of commands if libs are still in /usr/lib.bak
Edit2:
Another way to check would be from outside the chroot assuming / of the system is mounted to /mnt of the live media
# pacman -r /mnt -Qoq /usr/lib | pacman -r /mnt -Qkk -
Last edited by loqs (2017-02-26 00:18:01)
Offline