[libglvnd] libglvnd support for mesa is now in testing

lordheavy · 2017-02-27 19:55:19

Please post your feedback here

loqs · 2017-02-27 20:15:18

Single Nvidia discrete card no xorg config files.
Packages upgraded

nvidia-utils-378.13-5-x86_64.pkg.tar.xz libglvnd-0.2.999+g4ba53457-1-x86_64.pkg.tar.xz mesa-17.0.0-3-x86_64.pkg.tar.xz

nvidia-utils conflict removed nvidia-libgl as expected, all working as expected.
Just of note there were two warnings of dependency cycles.

warning: dependency cycle detected:
warning: libglvnd will be installed before its nvidia-utils dependency
warning: dependency cycle detected:
warning: mesa will be installed before its libglvnd dependency

lordheavy · 2017-02-27 20:20:07

loqs wrote:

Single Nvidia discrete card no xorg config files.
Packages upgraded
nvidia-utils-378.13-5-x86_64.pkg.tar.xz libglvnd-0.2.999+g4ba53457-1-x86_64.pkg.tar.xz mesa-17.0.0-3-x86_64.pkg.tar.xz
nvidia-utils conflict removed nvidia-libgl as expected, all working as expected.
Just of note there were two warnings of dependency cycles.
warning: dependency cycle detected:
warning: libglvnd will be installed before its nvidia-utils dependency
warning: dependency cycle detected:
warning: mesa will be installed before its libglvnd dependency

The dependency cycle is expected because nvidia/mesa depends on libglvnd, but libglvnd which provide libgl/libegl/libgles depends on an opengl driver (mesa/nvidia)

Last edited by lordheavy (2017-02-27 20:20:23)

Omar007 · 2017-02-27 22:40:36

First results; it did not break my current system setup

I'm running a system with two GeForce GTX970 cards. I'm using an Xorg config file to run 2 monitors off of the primary card and 1 off of the secondary. All screens form 1 X-screen, spanned horizontally.
I'll most likely be unable to do any further testing until the weekend but at least the changes did not break the current configurations so that's nice

Chuck Arch Linux · 2017-02-28 01:09:42

Everything work as before the update. Running intel with nividia Geforce GT 745M.

In fact, the only behavior I got for a long time is that I can't start optirun after my laptop suspend.

[ 1057.699198] [ERROR]Cannot access secondary GPU - error: Could not enable discrete graphics card

[ 1057.699218] [ERROR]Aborting because fallback start is disabled.

Anyone know how to correct this.
The only thing that work is a reboot.

jdbrown · 2017-02-28 02:10:02

Hi, I saw it was mentioned that

with an updated 10-nvidia-drm-outputclass.conf file that should help to have an "out-of-the-box" working xorg-server experience with optimus system

does "optimus system" here mean the configuration using proprietary driver?

I remember that the update a few days ago broke that configuration. So what do I need now to use that? Only the xrandr commands?

whompy · 2017-02-28 04:09:45

I'm having issues with nouveau using d3d9 and glvnd running via xwayland. I rolled back to old xserver and old mesa, things worked. Compiled old mesa with lib-glvnd-backed xserver and things did not work. I believe I tried old xserver with new mesa with no issues a few days ago, but I am experiencing different issues with mesa git today. Non-nine mesa works okay, but something in that change seems to cause the game I am playing (Diablo 3) to crash on load without much detail.

pedrogabriel · 2017-02-28 04:16:58

with an updated 10-nvidia-drm-outputclass.conf file that should help to have an "out-of-the-box" working xorg-server experience with optimus system

that means I can drop bumblebee/bbswitch?

somercet · 2017-02-28 04:38:07

I use nouveau. Pacman removed mesa-libgl and installed libglvnd. Upon restart, X became completely unusable and would lock the display.

00:0d.0 VGA compatible controller: NVIDIA Corporation C61 [GeForce 7025 / nForce 630a] (rev a2)
02:00.1 Audio device: NVIDIA Corporation GF119 HDMI Audio Controller (rev a1)

GF119 is the card in use. X unusable until I installed nvidia and nvidia-utils. No warning.

ETA: urbanterror was working under Nouveau. nvidia performance is unusably slow.

ETA: Urban Terror now working with nvidia and opencl-nvidia.

Last edited by somercet (2017-03-04 17:00:11)

z3ntu · 2017-02-28 08:00:43

I still have to have

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

in my /usr/share/sddm/scripts/Xsetup , otherwise X won't start (some 'couldn't open display for dpi computation' error).

The only problem I noticed until now is that Chrome doesn't like the new setup (log from chrome://gpu : http://pastebin.com/ZQVMPj6i) and youtube videos just spaz out. (Chromium works though...)
I will do further testing later today.
EDIT: Maybe screen tearing got worse but at least it's still very noticeable

Last edited by z3ntu (2017-02-28 08:28:27)

cotko · 2017-02-28 08:43:01

After last upgrade, what I noticed is (asus n76vz intel+nvidia using KDE (with startx, without login managers), nvidia proprietary, bumblebee)

- transparency does not work any more: I have transparency enabled for yakuake and now it's opaque, while I resize/move a window, it became transparent, now it doesn't
- screen edges in kde (show all desktops/apps etc) are not working any more (they are still enabled, I've toggled them off and back on in kde's settings just to eliminate possibility to be a kde upgrade bug)

Last edited by cotko (2017-02-28 09:12:59)

cyril · 2017-02-28 09:02:04

I have an Asus laptop with an nVidia GT218M card.
nvidia-340xx is installed.

After upgrade, sddm freezes.
xinit works but report the following error:
"Failed to initialize GLX extension (Compatible NVIDIA X driver not found)"

kde is unusable (plasma complains about lacking openGL)

Any suggestion on this are welcome...

gw3rty · 2017-02-28 12:43:23

The update breaks Xorg on radeon (R9 290X). I'm getting SEGFAULT when starting the sddm-greeter.
I was forced to rollback to stable repositories to fix the issue.
However, the update was done smoothly on Skylake laptop. Seems works fine without any issues.

loqs · 2017-02-28 13:21:40

@cyril and others with issues could you please post your xorg.log and related configs ( /etc/X11/xorg.conf /etc/X11/xorg.conf.d/*.conf )

Kierek · 2017-02-28 14:56:14

It seems that updating broke vaapi for me.

[kierek@kierekDesktop ~]$ vainfo 
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/emgd_drv_video.so
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit

[kierek@kierekDesktop ~]$ cd /usr/lib/dri/
[kierek@kierekDesktop dri]$ ls
dummy_drv_video.so  i965_drv_video.so

I have intel igpu and gtx 750 ti which I use through bumblebee(it works the same as before)

****

Yup, downgrading mesa and libglvnd to stable makes vaapi work again.

[kierek@kierekDesktop ~]$ vainfo 
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_39
libva info: va_openDriver() returns 0
vainfo: VA-API version: 0.39 (libva 1.7.3)
vainfo: Driver version: Intel i965 driver for Intel(R) Skylake - 1.7.3
vainfo: Supported profile and entrypoints
      VAProfileMPEG2Simple            :	VAEntrypointVLD
      VAProfileMPEG2Simple            :	VAEntrypointEncSlice
      VAProfileMPEG2Main              :	VAEntrypointVLD
      VAProfileMPEG2Main              :	VAEntrypointEncSlice
      VAProfileH264ConstrainedBaseline:	VAEntrypointVLD
      VAProfileH264ConstrainedBaseline:	VAEntrypointEncSlice
      VAProfileH264ConstrainedBaseline:	VAEntrypointEncSliceLP
      VAProfileH264Main               :	VAEntrypointVLD
      VAProfileH264Main               :	VAEntrypointEncSlice
      VAProfileH264Main               :	VAEntrypointEncSliceLP
      VAProfileH264High               :	VAEntrypointVLD
      VAProfileH264High               :	VAEntrypointEncSlice
      VAProfileH264High               :	VAEntrypointEncSliceLP
      VAProfileH264MultiviewHigh      :	VAEntrypointVLD
      VAProfileH264MultiviewHigh      :	VAEntrypointEncSlice
      VAProfileH264StereoHigh         :	VAEntrypointVLD
      VAProfileH264StereoHigh         :	VAEntrypointEncSlice
      VAProfileVC1Simple              :	VAEntrypointVLD
      VAProfileVC1Main                :	VAEntrypointVLD
      VAProfileVC1Advanced            :	VAEntrypointVLD
      VAProfileNone                   :	VAEntrypointVideoProc
      VAProfileJPEGBaseline           :	VAEntrypointVLD
      VAProfileJPEGBaseline           :	VAEntrypointEncPicture
      VAProfileVP8Version0_3          :	VAEntrypointVLD
      VAProfileVP8Version0_3          :	VAEntrypointEncSlice
      VAProfileHEVCMain               :	VAEntrypointVLD
      VAProfileHEVCMain               :	VAEntrypointEncSlice

Last edited by Kierek (2017-02-28 15:01:08)

lordheavy · 2017-02-28 15:27:05

Kierek wrote:

It seems that updating broke vaapi for me.
[kierek@kierekDesktop ~]$ vainfo 
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/emgd_drv_video.so
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit
[kierek@kierekDesktop ~]$ cd /usr/lib/dri/
[kierek@kierekDesktop dri]$ ls
dummy_drv_video.so  i965_drv_video.so
I have intel igpu and gtx 750 ti which I use through bumblebee(it works the same as before)
****
Yup, downgrading mesa and libglvnd to stable makes vaapi work again.

Can you open a bug report ? found this redhat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=1422151

edit: Please test with libva-1.7.3-2 in testing

Last edited by lordheavy (2017-02-28 15:54:49)

lonaowna · 2017-02-28 16:33:19

Using Nvidia GTX970 with proprietary driver, everything related to OpenGL is working fine, but GDM is very sluggish.. This is in the journal:

kernel: [drm:nvidia_drm_gem_import_nvkms_memory [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to import NVKMS memory to GEM object
kernel: [drm:nvidia_drm_gem_import_nvkms_memory [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to import NVKMS memory to GEM object
kernel: [drm:nvidia_drm_gem_import_nvkms_memory [nvidia_drm]] *ERROR* [nvidia-drm] [GPU ID 0x00000100] Failed to import NVKMS memory to GEM object
gnome-shell[657]: Failed to apply DRM plane transform 0: Invalid argument
gnome-shell[657]: Failed to apply DRM plane transform 0: Invalid argument
org.gnome.Shell.desktop[657]: Disabling glamor and dri3, EGL setup failed
org.gnome.Shell.desktop[657]: Failed to initialize glamor, falling back to sw

Edit: never mind, went away when I disabled DRM KMS. Likely unrelated, sorry!

Last edited by lonaowna (2017-02-28 16:36:45)

Kierek · 2017-02-28 16:36:39

lordheavy wrote:

Can you open a bug report ? found this redhat bugzilla https://bugzilla.redhat.com/show_bug.cgi?id=1422151
edit: Please test with libva-1.7.3-2 in testing

Still not working, but this time with a different output:

[kierek@kierekDesktop ~]$ vainfo 
libva info: VA-API version 0.39.4
libva info: va_getDriverName() returns 0
libva info: Trying to open /usr/lib/dri/i965_drv_video.so
libva info: Found init function __vaDriverInit_0_39
error: failed to resolve wl_drm_interface(): /usr/lib/libEGL.so.1: undefined symbol: wl_drm_interface
libva error: /usr/lib/dri/i965_drv_video.so init failed
libva info: va_openDriver() returns -1
vaInitialize failed with error code -1 (unknown libva error),exit

I'm on Gnome 3 Wayland.

Last edited by Kierek (2017-02-28 17:20:33)

cyril · 2017-02-28 17:21:19

loqs wrote:

@cyril and others with issues could you please post your xorg.log and related configs ( /etc/X11/xorg.conf /etc/X11/xorg.conf.d/*.conf )

no /etc/X11/xorg.conf
empty /etc/X11/xorg.conf.d/

here is the Xorg.0.log:

[ 66243.121] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[ 66243.128] X Protocol Version 11, Revision 0
[ 66243.130] Build Operating System: Linux 4.8.14-1-ARCH x86_64 
[ 66243.132] Current Operating System: Linux momo 4.9.11-1-ARCH #1 SMP PREEMPT Sun Feb 19 13:45:52 UTC 2017 x86_64
[ 66243.132] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8461c7cc-f185-4f65-9b43-c266e4b45add rw quiet
[ 66243.135] Build Date: 14 February 2017  03:36:07AM
[ 66243.137]  
[ 66243.140] Current version of pixman: 0.34.0
[ 66243.145] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[ 66243.145] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 66243.152] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 28 18:02:27 2017
[ 66243.155] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 66243.155] (==) No Layout section.  Using the first Screen section.
[ 66243.155] (==) No screen section available. Using defaults.
[ 66243.155] (**) |-->Screen "Default Screen Section" (0)
[ 66243.155] (**) |   |-->Monitor "<default monitor>"
[ 66243.156] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[ 66243.156] (==) Automatically adding devices
[ 66243.156] (==) Automatically enabling devices
[ 66243.156] (==) Automatically adding GPU devices
[ 66243.156] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 66243.156] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 66243.156] 	Entry deleted from font path.
[ 66243.156] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 66243.156] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 66243.156] 	Entry deleted from font path.
[ 66243.156] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 66243.156] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[ 66243.156] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 66243.156] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 66243.156] (II) Loader magic: 0x822d60
[ 66243.156] (II) Module ABI versions:
[ 66243.156] 	X.Org ANSI C Emulation: 0.4
[ 66243.156] 	X.Org Video Driver: 23.0
[ 66243.156] 	X.Org XInput driver : 24.1
[ 66243.156] 	X.Org Server Extension : 10.0
[ 66243.157] (--) using VT number 1

[ 66243.157] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 66243.158] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 66243.158] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 66243.164] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[ 66243.166] (--) PCI:*(0:0:2:0) 8086:0046:1043:1432 rev 18, Mem @ 0xd3400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e080/8, BIOS @ 0x????????/131072
[ 66243.166] (--) PCI: (0:1:0:0) 10de:0a70:1043:1432 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[ 66243.166] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 66243.166] (II) LoadModule: "glx"
[ 66243.166] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[ 66243.184] (II) Module glx: vendor="NVIDIA Corporation"
[ 66243.184] 	compiled for 4.0.2, module version = 1.0.0
[ 66243.184] 	Module class: X.Org Server Extension
[ 66243.184] (II) NVIDIA GLX Module  340.102  Mon Jan 16 12:37:38 PST 2017
[ 66243.184] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[ 66243.184] 	loading driver: nvidia
[ 66243.184] (==) Matched intel as autoconfigured driver 0
[ 66243.184] (==) Matched nvidia as autoconfigured driver 1
[ 66243.184] (==) Matched nouveau as autoconfigured driver 2
[ 66243.184] (==) Matched nv as autoconfigured driver 3
[ 66243.184] (==) Matched intel as autoconfigured driver 4
[ 66243.184] (==) Matched modesetting as autoconfigured driver 5
[ 66243.184] (==) Matched fbdev as autoconfigured driver 6
[ 66243.184] (==) Matched vesa as autoconfigured driver 7
[ 66243.184] (==) Assigned the driver to the xf86ConfigLayout
[ 66243.184] (II) LoadModule: "intel"
[ 66243.185] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 66243.185] (II) Module intel: vendor="X.Org Foundation"
[ 66243.185] 	compiled for 1.19.1, module version = 2.99.917
[ 66243.185] 	Module class: X.Org Video Driver
[ 66243.185] 	ABI class: X.Org Video Driver, version 23.0
[ 66243.185] (II) LoadModule: "nvidia"
[ 66243.185] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 66243.186] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 66243.186] 	compiled for 4.0.2, module version = 1.0.0
[ 66243.186] 	Module class: X.Org Video Driver
[ 66243.186] (II) LoadModule: "nouveau"
[ 66243.186] (WW) Warning, couldn't open module nouveau
[ 66243.186] (II) UnloadModule: "nouveau"
[ 66243.186] (II) Unloading nouveau
[ 66243.186] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 66243.186] (II) LoadModule: "nv"
[ 66243.187] (WW) Warning, couldn't open module nv
[ 66243.187] (II) UnloadModule: "nv"
[ 66243.187] (II) Unloading nv
[ 66243.187] (EE) Failed to load module "nv" (module does not exist, 0)
[ 66243.187] (II) LoadModule: "modesetting"
[ 66243.187] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 66243.187] (II) Module modesetting: vendor="X.Org Foundation"
[ 66243.187] 	compiled for 1.19.1, module version = 1.19.1
[ 66243.187] 	Module class: X.Org Video Driver
[ 66243.187] 	ABI class: X.Org Video Driver, version 23.0
[ 66243.187] (II) LoadModule: "fbdev"
[ 66243.187] (WW) Warning, couldn't open module fbdev
[ 66243.187] (II) UnloadModule: "fbdev"
[ 66243.187] (II) Unloading fbdev
[ 66243.187] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 66243.187] (II) LoadModule: "vesa"
[ 66243.188] (WW) Warning, couldn't open module vesa
[ 66243.188] (II) UnloadModule: "vesa"
[ 66243.188] (II) Unloading vesa
[ 66243.188] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 66243.188] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 66243.188] (II) intel: Driver for Intel(R) HD Graphics
[ 66243.188] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 66243.188] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 66243.188] (II) NVIDIA dlloader X Driver  340.102  Mon Jan 16 12:17:09 PST 2017
[ 66243.188] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 66243.188] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 66243.201] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20160919
[ 66243.201] (II) intel(0): SNA compiled from 2.99.917-757-g93942b7d
[ 66243.201] (WW) Falling back to old probe method for modesetting
[ 66243.201] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 66243.201] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 2 threads
[ 66243.201] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[ 66243.201] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 66243.201] (==) intel(0): RGB weight 888
[ 66243.201] (==) intel(0): Default visual is TrueColor
[ 66243.202] (II) intel(0): Output LVDS1 has no monitor section
[ 66243.202] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[ 66243.202] (II) intel(0): Enabled output LVDS1
[ 66243.202] (II) intel(0): Output VGA1 has no monitor section
[ 66243.202] (II) intel(0): Enabled output VGA1
[ 66243.202] (II) intel(0): Output HDMI1 has no monitor section
[ 66243.202] (II) intel(0): Enabled output HDMI1
[ 66243.202] (II) intel(0): Output DP1 has no monitor section
[ 66243.203] (II) intel(0): Enabled output DP1
[ 66243.203] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 66243.203] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 66243.203] (II) intel(0): Enabled output VIRTUAL1
[ 66243.203] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[ 66243.203] (==) intel(0): TearFree disabled
[ 66243.203] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 66243.203] (==) intel(0): DPI set to (96, 96)
[ 66243.203] (II) Loading sub module "dri3"
[ 66243.203] (II) LoadModule: "dri3"
[ 66243.203] (II) Module "dri3" already built-in
[ 66243.203] (II) Loading sub module "dri2"
[ 66243.203] (II) LoadModule: "dri2"
[ 66243.203] (II) Module "dri2" already built-in
[ 66243.203] (II) Loading sub module "present"
[ 66243.203] (II) LoadModule: "present"
[ 66243.203] (II) Module "present" already built-in
[ 66243.203] (II) UnloadModule: "nvidia"
[ 66243.203] (II) Unloading nvidia
[ 66243.204] (==) Depth 24 pixmap format is 32 bpp
[ 66243.204] (II) intel(0): SNA initialized with Ironlake (gen5) backend
[ 66243.204] (==) intel(0): Backing store enabled
[ 66243.204] (==) intel(0): Silken mouse enabled
[ 66243.204] (II) intel(0): HW Cursor enabled
[ 66243.204] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 66243.204] (==) intel(0): DPMS enabled
[ 66243.205] (==) intel(0): Display hotplug detection enabled
[ 66243.205] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 66243.205] (II) intel(0): [DRI2] Setup complete
[ 66243.205] (II) intel(0): [DRI2]   DRI driver: i965
[ 66243.205] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[ 66243.205] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 66243.205] (II) intel(0): hardware support for Present enabled
[ 66243.205] (--) RandR disabled
[ 66243.213] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 66243.225] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 66243.230] (II) intel(0): Setting screen physical size to 361 x 203
[ 66243.309] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 66243.309] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 66243.309] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 66243.309] (II) LoadModule: "libinput"
[ 66243.309] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 66243.312] (II) Module libinput: vendor="X.Org Foundation"
[ 66243.312] 	compiled for 1.19.1, module version = 0.24.0
[ 66243.312] 	Module class: X.Org XInput Driver
[ 66243.312] 	ABI class: X.Org XInput driver, version 24.1
[ 66243.312] (II) Using input driver 'libinput' for 'Power Button'
[ 66243.312] (**) Power Button: always reports core events
[ 66243.312] (**) Option "Device" "/dev/input/event3"
[ 66243.312] (**) Option "_source" "server/udev"
[ 66243.312] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 66243.312] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 66243.336] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[ 66243.337] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 66243.337] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[ 66243.337] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[ 66243.338] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 66243.338] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 66243.338] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 66243.338] (II) Using input driver 'libinput' for 'Video Bus'
[ 66243.338] (**) Video Bus: always reports core events
[ 66243.338] (**) Option "Device" "/dev/input/event7"
[ 66243.338] (**) Option "_source" "server/udev"
[ 66243.338] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[ 66243.338] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[ 66243.356] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input15/event7"
[ 66243.356] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 66243.357] (II) input device 'Video Bus', /dev/input/event7 is tagged by udev as: Keyboard
[ 66243.357] (II) input device 'Video Bus', /dev/input/event7 is a keyboard
[ 66243.358] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 66243.358] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 66243.358] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 66243.358] (II) Using input driver 'libinput' for 'Video Bus'
[ 66243.358] (**) Video Bus: always reports core events
[ 66243.358] (**) Option "Device" "/dev/input/event6"
[ 66243.358] (**) Option "_source" "server/udev"
[ 66243.358] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 66243.358] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 66243.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input14/event6"
[ 66243.376] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[ 66243.377] (II) input device 'Video Bus', /dev/input/event6 is tagged by udev as: Keyboard
[ 66243.377] (II) input device 'Video Bus', /dev/input/event6 is a keyboard
[ 66243.377] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 66243.377] (II) No input driver specified, ignoring this device.
[ 66243.377] (II) This device may have been added with another device file.
[ 66243.378] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 66243.378] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 66243.378] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 66243.378] (II) Using input driver 'libinput' for 'Sleep Button'
[ 66243.378] (**) Sleep Button: always reports core events
[ 66243.378] (**) Option "Device" "/dev/input/event2"
[ 66243.378] (**) Option "_source" "server/udev"
[ 66243.378] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 66243.378] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 66243.396] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[ 66243.396] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 66243.397] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[ 66243.397] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[ 66243.398] (II) config/udev: Adding input device USB2.0 0.3M UVC WebCam (/dev/input/event13)
[ 66243.398] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 66243.398] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "libinput keyboard catchall"
[ 66243.398] (II) Using input driver 'libinput' for 'USB2.0 0.3M UVC WebCam'
[ 66243.398] (**) USB2.0 0.3M UVC WebCam: always reports core events
[ 66243.398] (**) Option "Device" "/dev/input/event13"
[ 66243.398] (**) Option "_source" "server/udev"
[ 66243.399] (II) input device 'USB2.0 0.3M UVC WebCam', /dev/input/event13 is tagged by udev as: Keyboard
[ 66243.399] (II) input device 'USB2.0 0.3M UVC WebCam', /dev/input/event13 is a keyboard
[ 66243.436] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input20/event13"
[ 66243.436] (II) XINPUT: Adding extended input device "USB2.0 0.3M UVC WebCam" (type: KEYBOARD, id 10)
[ 66243.437] (II) input device 'USB2.0 0.3M UVC WebCam', /dev/input/event13 is tagged by udev as: Keyboard
[ 66243.437] (II) input device 'USB2.0 0.3M UVC WebCam', /dev/input/event13 is a keyboard
[ 66243.437] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[ 66243.438] (II) No input driver specified, ignoring this device.
[ 66243.438] (II) This device may have been added with another device file.
[ 66243.438] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event10)
[ 66243.438] (II) No input driver specified, ignoring this device.
[ 66243.438] (II) This device may have been added with another device file.
[ 66243.438] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event11)
[ 66243.438] (II) No input driver specified, ignoring this device.
[ 66243.438] (II) This device may have been added with another device file.
[ 66243.439] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event12)
[ 66243.439] (II) No input driver specified, ignoring this device.
[ 66243.439] (II) This device may have been added with another device file.
[ 66243.439] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event4)
[ 66243.439] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[ 66243.439] (**) Asus Laptop extra buttons: Applying InputClass "libinput keyboard catchall"
[ 66243.439] (II) Using input driver 'libinput' for 'Asus Laptop extra buttons'
[ 66243.439] (**) Asus Laptop extra buttons: always reports core events
[ 66243.439] (**) Option "Device" "/dev/input/event4"
[ 66243.439] (**) Option "_source" "server/udev"
[ 66243.440] (II) input device 'Asus Laptop extra buttons', /dev/input/event4 is tagged by udev as: Keyboard
[ 66243.440] (II) input device 'Asus Laptop extra buttons', /dev/input/event4 is a keyboard
[ 66243.486] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input8/event4"
[ 66243.486] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[ 66243.487] (II) input device 'Asus Laptop extra buttons', /dev/input/event4 is tagged by udev as: Keyboard
[ 66243.487] (II) input device 'Asus Laptop extra buttons', /dev/input/event4 is a keyboard
[ 66243.487] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 66243.487] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 66243.487] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 66243.488] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 66243.488] (**) AT Translated Set 2 keyboard: always reports core events
[ 66243.488] (**) Option "Device" "/dev/input/event0"
[ 66243.488] (**) Option "_source" "server/udev"
[ 66243.488] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 66243.488] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 66243.526] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 66243.526] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[ 66243.527] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[ 66243.527] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[ 66243.527] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event8)
[ 66243.528] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[ 66243.528] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[ 66243.528] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[ 66243.528] (**) ETPS/2 Elantech Touchpad: always reports core events
[ 66243.528] (**) Option "Device" "/dev/input/event8"
[ 66243.528] (**) Option "_source" "server/udev"
[ 66243.528] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event8 is tagged by udev as: Touchpad
[ 66243.528] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event8 is a touchpad
[ 66243.566] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input13/event8"
[ 66243.566] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[ 66243.567] (**) Option "AccelerationScheme" "none"
[ 66243.567] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[ 66243.567] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[ 66243.567] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[ 66243.567] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event8 is tagged by udev as: Touchpad
[ 66243.567] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event8 is a touchpad
[ 66243.568] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[ 66243.568] (II) No input driver specified, ignoring this device.
[ 66243.568] (II) This device may have been added with another device file.
[ 66243.568] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 66243.568] (II) No input driver specified, ignoring this device.
[ 66243.568] (II) This device may have been added with another device file.
[ 66245.203] (II) intel(0): EDID vendor "CMO", prod id 5489
[ 66245.203] (II) intel(0): Printing DDC gathered Modelines:
[ 66245.203] (II) intel(0): Modeline "1366x768"x0.0   75.50  1366 1397 1462 1560  768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 66246.784] (II) UnloadModule: "libinput"
[ 66246.784] (II) UnloadModule: "libinput"
[ 66246.784] (II) UnloadModule: "libinput"
[ 66246.784] (II) UnloadModule: "libinput"
[ 66246.784] (II) UnloadModule: "libinput"
[ 66246.784] (II) UnloadModule: "libinput"
[ 66246.784] (II) UnloadModule: "libinput"
[ 66246.784] (II) UnloadModule: "libinput"
[ 66246.861] (II) Server terminated successfully (0). Closing log file.

loqs · 2017-02-28 18:14:46

@cyril check dmesg I suspect the nvidia kernel modules is not loading properly.
The kernel version does not match the version in testing are the testing repositories enabled and all packages updated?

cyril · 2017-02-28 20:13:01

loqs wrote:

The kernel version does not match the version in testing are the testing repositories enabled and all packages updated?

Indeed. Sorry about that.
Here is the correct Xorg.0.log:

[    59.337] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[    59.337] X Protocol Version 11, Revision 0
[    59.337] Build Operating System: Linux 4.8.14-1-ARCH x86_64 
[    59.337] Current Operating System: Linux momo 4.10.1-1-ARCH #1 SMP PREEMPT Sun Feb 26 21:08:53 UTC 2017 x86_64
[    59.337] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8461c7cc-f185-4f65-9b43-c266e4b45add rw quiet
[    59.337] Build Date: 14 February 2017  03:36:07AM
[    59.337]  
[    59.338] Current version of pixman: 0.34.0
[    59.338] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    59.338] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    59.338] (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 28 21:07:11 2017
[    59.419] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    59.470] (==) No Layout section.  Using the first Screen section.
[    59.470] (==) No screen section available. Using defaults.
[    59.470] (**) |-->Screen "Default Screen Section" (0)
[    59.470] (**) |   |-->Monitor "<default monitor>"
[    59.481] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    59.481] (==) Automatically adding devices
[    59.481] (==) Automatically enabling devices
[    59.481] (==) Automatically adding GPU devices
[    59.490] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    59.582] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    59.582] 	Entry deleted from font path.
[    59.582] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    59.582] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    59.582] 	Entry deleted from font path.
[    59.582] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    59.582] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    59.582] (==) ModulePath set to "/usr/lib/xorg/modules"
[    59.582] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    59.597] (II) Loader magic: 0x822d60
[    59.597] (II) Module ABI versions:
[    59.597] 	X.Org ANSI C Emulation: 0.4
[    59.597] 	X.Org Video Driver: 23.0
[    59.597] 	X.Org XInput driver : 24.1
[    59.597] 	X.Org Server Extension : 10.0
[    59.598] (--) using VT number 3

[    59.598] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    59.599] (II) xfree86: Adding drm device (/dev/dri/card1)
[    59.599] (II) xfree86: Adding drm device (/dev/dri/card0)
[    59.604] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules"
[    59.604] (**) OutputClass "nvidia" setting /dev/dri/card1 as PrimaryGPU
[    59.605] (--) PCI: (0:0:2:0) 8086:0046:1043:1432 rev 18, Mem @ 0xd3400000/4194304, 0xb0000000/268435456, I/O @ 0x0000e080/8, BIOS @ 0x????????/131072
[    59.605] (--) PCI:*(0:1:0:0) 10de:0a70:1043:1432 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
[    59.605] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    59.606] (II) LoadModule: "glx"
[    59.619] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    60.450] (II) Module glx: vendor="NVIDIA Corporation"
[    60.450] 	compiled for 4.0.2, module version = 1.0.0
[    60.450] 	Module class: X.Org Server Extension
[    60.452] (II) NVIDIA GLX Module  340.102  Mon Jan 16 12:37:38 PST 2017
[    60.464] (II) Applying OutputClass "nvidia" to /dev/dri/card1
[    60.464] 	loading driver: nvidia
[    60.464] (II) Applying OutputClass "intel" to /dev/dri/card0
[    60.464] 	loading driver: modesetting
[    60.464] (==) Matched nvidia as autoconfigured driver 0
[    60.464] (==) Matched nouveau as autoconfigured driver 1
[    60.464] (==) Matched nv as autoconfigured driver 2
[    60.464] (==) Matched modesetting as autoconfigured driver 3
[    60.464] (==) Matched intel as autoconfigured driver 4
[    60.464] (==) Matched nouveau as autoconfigured driver 5
[    60.464] (==) Matched nv as autoconfigured driver 6
[    60.464] (==) Matched modesetting as autoconfigured driver 7
[    60.464] (==) Matched fbdev as autoconfigured driver 8
[    60.464] (==) Matched vesa as autoconfigured driver 9
[    60.464] (==) Assigned the driver to the xf86ConfigLayout
[    60.464] (II) LoadModule: "nvidia"
[    60.542] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    60.633] (II) Module nvidia: vendor="NVIDIA Corporation"
[    60.633] 	compiled for 4.0.2, module version = 1.0.0
[    60.633] 	Module class: X.Org Video Driver
[    60.644] (II) LoadModule: "nouveau"
[    60.806] (WW) Warning, couldn't open module nouveau
[    60.806] (II) UnloadModule: "nouveau"
[    60.806] (II) Unloading nouveau
[    60.806] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    60.806] (II) LoadModule: "nv"
[    60.806] (WW) Warning, couldn't open module nv
[    60.806] (II) UnloadModule: "nv"
[    60.806] (II) Unloading nv
[    60.806] (EE) Failed to load module "nv" (module does not exist, 0)
[    60.806] (II) LoadModule: "modesetting"
[    60.806] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    60.822] (II) Module modesetting: vendor="X.Org Foundation"
[    60.822] 	compiled for 1.19.1, module version = 1.19.1
[    60.822] 	Module class: X.Org Video Driver
[    60.822] 	ABI class: X.Org Video Driver, version 23.0
[    60.822] (II) LoadModule: "intel"
[    60.822] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    60.871] (II) Module intel: vendor="X.Org Foundation"
[    60.871] 	compiled for 1.19.1, module version = 2.99.917
[    60.871] 	Module class: X.Org Video Driver
[    60.871] 	ABI class: X.Org Video Driver, version 23.0
[    60.871] (II) LoadModule: "fbdev"
[    60.871] (WW) Warning, couldn't open module fbdev
[    60.871] (II) UnloadModule: "fbdev"
[    60.871] (II) Unloading fbdev
[    60.871] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    60.871] (II) LoadModule: "vesa"
[    60.871] (WW) Warning, couldn't open module vesa
[    60.871] (II) UnloadModule: "vesa"
[    60.871] (II) Unloading vesa
[    60.871] (EE) Failed to load module "vesa" (module does not exist, 0)
[    60.871] (II) NVIDIA dlloader X Driver  340.102  Mon Jan 16 12:17:09 PST 2017
[    60.871] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    60.886] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    60.886] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    60.887] (II) intel: Driver for Intel(R) HD Graphics
[    60.887] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    60.887] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    60.907] (II) Loading sub module "fb"
[    60.907] (II) LoadModule: "fb"
[    60.907] (II) Loading /usr/lib/xorg/modules/libfb.so
[    60.925] (II) Module fb: vendor="X.Org Foundation"
[    60.925] 	compiled for 1.19.1, module version = 1.0.0
[    60.925] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    60.925] (WW) Unresolved symbol: fbGetGCPrivateKey
[    60.925] (II) Loading sub module "wfb"
[    60.925] (II) LoadModule: "wfb"
[    60.925] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    60.940] (II) Module wfb: vendor="X.Org Foundation"
[    60.940] 	compiled for 1.19.1, module version = 1.0.0
[    60.940] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    60.940] (II) Loading sub module "ramdac"
[    60.940] (II) LoadModule: "ramdac"
[    60.940] (II) Module "ramdac" already built-in
[    60.944] (WW) Falling back to old probe method for modesetting
[    60.989] (II) modeset(G0): using drv /dev/dri/card0
[    60.990] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    60.990] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    60.990] (==) NVIDIA(0): RGB weight 888
[    60.990] (==) NVIDIA(0): Default visual is TrueColor
[    60.990] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    60.990] (II) Applying OutputClass "nvidia" options to /dev/dri/card1
[    60.990] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    60.991] (**) NVIDIA(0): Enabling 2D acceleration
[    61.677] (WW) NVIDIA(0): Unable to read EDID for display device CRT-0
[    61.708] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[    61.723] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
[    61.723] (--) NVIDIA(0): Memory: 1048576 kBytes
[    61.723] (--) NVIDIA(0): VideoBIOS: 70.18.4d.00.11
[    61.723] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    61.726] (--) NVIDIA(0): Valid display device(s) on GeForce 310M at PCI:1:0:0
[    61.726] (--) NVIDIA(0):     CRT-0 (boot, connected)
[    61.726] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    61.726] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    61.726] (**) NVIDIA(0):     device CRT-0 (Using EDID frequencies has been enabled on
[    61.726] (**) NVIDIA(0):     all display devices.)
[    61.733] (==) NVIDIA(0): 
[    61.733] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    61.733] (==) NVIDIA(0):     will be used as the requested mode.
[    61.733] (==) NVIDIA(0): 
[    61.733] (II) NVIDIA(0): Validated MetaModes:
[    61.733] (II) NVIDIA(0):     "CRT-0:nvidia-auto-select"
[    61.733] (II) NVIDIA(0): Virtual screen size determined to be 1024 x 768
[    61.737] (WW) NVIDIA(0): Unable to get display device CRT-0's EDID; cannot compute DPI
[    61.737] (WW) NVIDIA(0):     from CRT-0's EDID.
[    61.737] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[    61.738] (==) modeset(G0): Depth 24, (==) framebuffer bpp 32
[    61.738] (==) modeset(G0): RGB weight 888
[    61.738] (==) modeset(G0): Default visual is TrueColor
[    61.738] (II) Loading sub module "glamoregl"
[    61.738] (II) LoadModule: "glamoregl"
[    61.738] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    61.832] (II) Module glamoregl: vendor="X.Org Foundation"
[    61.832] 	compiled for 1.19.1, module version = 1.0.0
[    61.832] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    61.832] (II) glamor: OpenGL accelerated X.org driver based.
[    62.184] (EE) modeset(G0): eglGetDisplay() failed
[    62.202] (EE) modeset(G0): glamor initialization failed
[    62.202] (II) modeset(G0): ShadowFB: preferred YES, enabled YES
[    62.202] (II) modeset(G0): Double-buffered shadow updates: off
[    62.202] (II) modeset(G0): Output LVDS-1-1 has no monitor section
[    62.207] (II) modeset(G0): Output VGA-1-1 has no monitor section
[    62.215] (II) modeset(G0): Output HDMI-1-1 has no monitor section
[    62.215] (II) modeset(G0): Output DP-1-1 has no monitor section
[    62.215] (II) modeset(G0): EDID for output LVDS-1-1
[    62.215] (II) modeset(G0): Manufacturer: CMO  Model: 1571  Serial#: 0
[    62.215] (II) modeset(G0): Year: 2008  Week: 36
[    62.215] (II) modeset(G0): EDID Version: 1.3
[    62.215] (II) modeset(G0): Digital Display Input
[    62.215] (II) modeset(G0): Max Image Size [cm]: horiz.: 35  vert.: 19
[    62.215] (II) modeset(G0): Gamma: 2.20
[    62.215] (II) modeset(G0): No DPMS capabilities specified
[    62.215] (II) modeset(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    62.215] (II) modeset(G0): First detailed timing is preferred mode
[    62.215] (II) modeset(G0): redX: 0.602 redY: 0.340   greenX: 0.306 greenY: 0.530
[    62.215] (II) modeset(G0): blueX: 0.151 blueY: 0.120   whiteX: 0.313 whiteY: 0.329
[    62.215] (II) modeset(G0): Manufacturer's mask: 0
[    62.216] (II) modeset(G0): Supported detailed timing:
[    62.216] (II) modeset(G0): clock: 75.5 MHz   Image Size:  344 x 193 mm
[    62.216] (II) modeset(G0): h_active: 1366  h_sync: 1397  h_sync_end 1462 h_blank_end 1560 h_border: 0
[    62.216] (II) modeset(G0): v_active: 768  v_sync: 772  v_sync_end 784 v_blanking: 806 v_border: 0
[    62.216] (II) modeset(G0):  N156B6-L04
[    62.216] (II) modeset(G0):  CMO
[    62.216] (II) modeset(G0):  N156B6-L04
[    62.216] (II) modeset(G0): EDID (in hex):
[    62.216] (II) modeset(G0): 	00ffffffffffff000daf711500000000
[    62.216] (II) modeset(G0): 	24120103802313780a07f59a574e8726
[    62.216] (II) modeset(G0): 	1e505400000001010101010101010101
[    62.216] (II) modeset(G0): 	0101010101017e1d56c2500026301f41
[    62.216] (II) modeset(G0): 	4c0058c110000018000000fe004e3135
[    62.216] (II) modeset(G0): 	3642362d4c30340a2020000000fe0043
[    62.216] (II) modeset(G0): 	4d4f0a202020202020202020000000fe
[    62.216] (II) modeset(G0): 	004e31353642362d4c30340a2020003d
[    62.216] (II) modeset(G0): Printing probed modes for output LVDS-1-1
[    62.216] (II) modeset(G0): Modeline "1366x768"x60.0   75.50  1366 1397 1462 1560  768 772 784 806 -hsync -vsync (48.4 kHz eP)
[    62.216] (II) modeset(G0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    62.216] (II) modeset(G0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    62.216] (II) modeset(G0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    62.216] (II) modeset(G0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    62.216] (II) modeset(G0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    62.216] (II) modeset(G0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    62.216] (II) modeset(G0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    62.216] (II) modeset(G0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    62.216] (II) modeset(G0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    62.216] (II) modeset(G0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    62.216] (II) modeset(G0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    62.216] (II) modeset(G0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    62.216] (II) modeset(G0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    62.216] (II) modeset(G0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    62.216] (II) modeset(G0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    62.216] (II) modeset(G0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    62.221] (II) modeset(G0): EDID for output VGA-1-1
[    62.229] (II) modeset(G0): EDID for output HDMI-1-1
[    62.229] (II) modeset(G0): EDID for output DP-1-1
[    62.229] (==) modeset(G0): Using gamma correction (1.0, 1.0, 1.0)
[    62.229] (==) modeset(G0): DPI set to (96, 96)
[    62.229] (II) Loading sub module "fb"
[    62.229] (II) LoadModule: "fb"
[    62.229] (II) Loading /usr/lib/xorg/modules/libfb.so
[    62.230] (II) Module fb: vendor="X.Org Foundation"
[    62.230] 	compiled for 1.19.1, module version = 1.0.0
[    62.230] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    62.230] (II) Loading sub module "shadow"
[    62.230] (II) LoadModule: "shadow"
[    62.230] (II) Loading /usr/lib/xorg/modules/libshadow.so
[    62.240] (II) Module shadow: vendor="X.Org Foundation"
[    62.240] 	compiled for 1.19.1, module version = 1.1.0
[    62.240] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    62.240] (II) UnloadModule: "intel"
[    62.240] (II) Unloading intel
[    62.240] (--) Depth 24 pixmap format is 32 bpp
[    62.257] (==) modeset(G0): Backing store enabled
[    62.257] (==) modeset(G0): Silken mouse enabled
[    62.257] (II) modeset(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    62.258] (==) modeset(G0): DPMS enabled
[    62.258] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    62.285] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    62.285] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    62.285] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    62.285] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    62.285] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    62.285] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    62.285] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    62.285] (II) NVIDIA(0):     Config Options in the README.
[    62.288] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[    62.404] (==) NVIDIA(0): Disabling shared memory pixmaps
[    62.404] (==) NVIDIA(0): Backing store enabled
[    62.404] (==) NVIDIA(0): Silken mouse enabled
[    62.404] (==) NVIDIA(0): DPMS enabled
[    62.427] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    62.427] (II) Loading sub module "dri2"
[    62.427] (II) LoadModule: "dri2"
[    62.427] (II) Module "dri2" already built-in
[    62.427] (II) NVIDIA(0): [DRI2] Setup complete
[    62.427] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    62.427] (--) RandR disabled
[    62.434] (II) Initializing extension GLX
[    62.434] (II) Indirect GLX disabled.(II) modeset(G0): Damage tracking initialized
[    63.487] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    63.487] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    63.487] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    63.487] (II) LoadModule: "libinput"
[    63.487] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    63.536] (II) Module libinput: vendor="X.Org Foundation"
[    63.536] 	compiled for 1.19.1, module version = 0.24.0
[    63.536] 	Module class: X.Org XInput Driver
[    63.536] 	ABI class: X.Org XInput driver, version 24.1
[    63.536] (II) Using input driver 'libinput' for 'Power Button'
[    63.536] (**) Power Button: always reports core events
[    63.536] (**) Option "Device" "/dev/input/event3"
[    63.536] (**) Option "_source" "server/udev"
[    63.537] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    63.537] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    63.560] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input7/event3"
[    63.560] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    63.560] (II) input device 'Power Button', /dev/input/event3 is tagged by udev as: Keyboard
[    63.560] (II) input device 'Power Button', /dev/input/event3 is a keyboard
[    63.561] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[    63.561] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    63.561] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    63.561] (II) Using input driver 'libinput' for 'Video Bus'
[    63.561] (**) Video Bus: always reports core events
[    63.561] (**) Option "Device" "/dev/input/event5"
[    63.561] (**) Option "_source" "server/udev"
[    63.561] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[    63.561] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[    63.580] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input9/event5"
[    63.580] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    63.580] (II) input device 'Video Bus', /dev/input/event5 is tagged by udev as: Keyboard
[    63.580] (II) input device 'Video Bus', /dev/input/event5 is a keyboard
[    63.581] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    63.581] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    63.581] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    63.581] (II) Using input driver 'libinput' for 'Video Bus'
[    63.581] (**) Video Bus: always reports core events
[    63.581] (**) Option "Device" "/dev/input/event4"
[    63.581] (**) Option "_source" "server/udev"
[    63.581] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[    63.581] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[    63.600] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input8/event4"
[    63.600] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    63.600] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[    63.600] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[    63.601] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[    63.601] (II) No input driver specified, ignoring this device.
[    63.601] (II) This device may have been added with another device file.
[    63.601] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    63.601] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    63.601] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    63.601] (II) Using input driver 'libinput' for 'Sleep Button'
[    63.601] (**) Sleep Button: always reports core events
[    63.601] (**) Option "Device" "/dev/input/event2"
[    63.601] (**) Option "_source" "server/udev"
[    63.602] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[    63.602] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[    63.620] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6/event2"
[    63.620] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    63.620] (II) input device 'Sleep Button', /dev/input/event2 is tagged by udev as: Keyboard
[    63.620] (II) input device 'Sleep Button', /dev/input/event2 is a keyboard
[    63.621] (II) config/udev: Adding input device USB2.0 0.3M UVC WebCam (/dev/input/event13)
[    63.621] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "evdev keyboard catchall"
[    63.621] (**) USB2.0 0.3M UVC WebCam: Applying InputClass "libinput keyboard catchall"
[    63.621] (II) Using input driver 'libinput' for 'USB2.0 0.3M UVC WebCam'
[    63.621] (**) USB2.0 0.3M UVC WebCam: always reports core events
[    63.621] (**) Option "Device" "/dev/input/event13"
[    63.621] (**) Option "_source" "server/udev"
[    63.622] (II) input device 'USB2.0 0.3M UVC WebCam', /dev/input/event13 is tagged by udev as: Keyboard
[    63.622] (II) input device 'USB2.0 0.3M UVC WebCam', /dev/input/event13 is a keyboard
[    63.660] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input20/event13"
[    63.660] (II) XINPUT: Adding extended input device "USB2.0 0.3M UVC WebCam" (type: KEYBOARD, id 10)
[    63.660] (II) input device 'USB2.0 0.3M UVC WebCam', /dev/input/event13 is tagged by udev as: Keyboard
[    63.660] (II) input device 'USB2.0 0.3M UVC WebCam', /dev/input/event13 is a keyboard
[    63.661] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[    63.661] (II) No input driver specified, ignoring this device.
[    63.661] (II) This device may have been added with another device file.
[    63.661] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event9)
[    63.661] (II) No input driver specified, ignoring this device.
[    63.661] (II) This device may have been added with another device file.
[    63.662] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event10)
[    63.662] (II) No input driver specified, ignoring this device.
[    63.662] (II) This device may have been added with another device file.
[    63.662] (II) config/udev: Adding input device HDA Intel MID HDMI/DP,pcm=3 (/dev/input/event11)
[    63.662] (II) No input driver specified, ignoring this device.
[    63.662] (II) This device may have been added with another device file.
[    63.663] (II) config/udev: Adding input device Asus Laptop extra buttons (/dev/input/event7)
[    63.663] (**) Asus Laptop extra buttons: Applying InputClass "evdev keyboard catchall"
[    63.663] (**) Asus Laptop extra buttons: Applying InputClass "libinput keyboard catchall"
[    63.663] (II) Using input driver 'libinput' for 'Asus Laptop extra buttons'
[    63.663] (**) Asus Laptop extra buttons: always reports core events
[    63.663] (**) Option "Device" "/dev/input/event7"
[    63.663] (**) Option "_source" "server/udev"
[    63.663] (II) input device 'Asus Laptop extra buttons', /dev/input/event7 is tagged by udev as: Keyboard
[    63.663] (II) input device 'Asus Laptop extra buttons', /dev/input/event7 is a keyboard
[    63.710] (**) Option "config_info" "udev:/sys/devices/platform/asus_laptop/input/input18/event7"
[    63.710] (II) XINPUT: Adding extended input device "Asus Laptop extra buttons" (type: KEYBOARD, id 11)
[    63.710] (II) input device 'Asus Laptop extra buttons', /dev/input/event7 is tagged by udev as: Keyboard
[    63.710] (II) input device 'Asus Laptop extra buttons', /dev/input/event7 is a keyboard
[    63.711] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    63.711] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    63.711] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    63.711] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    63.711] (**) AT Translated Set 2 keyboard: always reports core events
[    63.711] (**) Option "Device" "/dev/input/event0"
[    63.711] (**) Option "_source" "server/udev"
[    63.711] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    63.711] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    63.750] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    63.750] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[    63.750] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is tagged by udev as: Keyboard
[    63.750] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event0 is a keyboard
[    63.751] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event12)
[    63.751] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    63.751] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[    63.751] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[    63.751] (**) ETPS/2 Elantech Touchpad: always reports core events
[    63.751] (**) Option "Device" "/dev/input/event12"
[    63.751] (**) Option "_source" "server/udev"
[    63.751] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is tagged by udev as: Touchpad
[    63.751] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is a touchpad
[    63.790] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input14/event12"
[    63.790] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 13)
[    63.790] (**) Option "AccelerationScheme" "none"
[    63.790] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[    63.790] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    63.790] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    63.790] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is tagged by udev as: Touchpad
[    63.791] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event12 is a touchpad
[    63.791] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[    63.791] (II) No input driver specified, ignoring this device.
[    63.791] (II) This device may have been added with another device file.
[    63.791] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    63.791] (II) No input driver specified, ignoring this device.
[    63.791] (II) This device may have been added with another device file.
[    83.965] (II) UnloadModule: "libinput"
[    83.965] (II) UnloadModule: "libinput"
[    83.965] (II) UnloadModule: "libinput"
[    83.965] (II) UnloadModule: "libinput"
[    83.965] (II) UnloadModule: "libinput"
[    83.965] (II) UnloadModule: "libinput"
[    83.965] (II) UnloadModule: "libinput"
[    83.966] (II) UnloadModule: "libinput"
[    83.982] (II) NVIDIA(GPU-0): Deleting GPU-0
[    83.983] (II) Server terminated successfully (0). Closing log file.

and the last lines of dmesg:

[   49.373141] nvidia: loading out-of-tree module taints kernel.
[   49.373149] nvidia: module license 'NVIDIA' taints kernel.
[   49.373150] Disabling lock debugging due to kernel taint
[   49.384168] nvidia 0000:01:00.0: enabling device (0000 -> 0003)
[   49.384353] nvidia 0000:01:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=none
[   49.384779] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 1
[   49.384793] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  340.102  Mon Jan 16 13:06:29 PST 2017

[   61.155907] ACPI Warning: \_SB.PCI0.PEG1.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[   61.155995] ACPI Warning: \_SB.PCI0.PEG1.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[   61.156122] ACPI Warning: \_SB.PCI0.PEG1.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[   61.156175] ACPI Warning: \_SB.PCI0.PEG1.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[   61.156227] ACPI Warning: \_SB.PCI0.PEG1.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[   61.156278] ACPI Warning: \_SB.PCI0.PEG1.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[   61.156410] ACPI Warning: \_SB.PCI0.PEG1.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[   61.156463] ACPI Warning: \_SB.PCI0.PEG1.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)
[   61.188399] ACPI Warning: \_SB.PCI0.PEG1.GFX0._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20160930/nsarguments-95)

shvelven · 2017-03-01 03:14:06

I recently got a new laptop and have been using nouveau as I couldn't get the nvidia driver to work properly.

I enabled the testing repo and updated, which pulled in the following possibly-relevent packages:

sudo pacman -Syu
...
testing/libglvnd                                      0.2.999+g4ba53457-1           1.57 MiB
testing/linux             4.9.11-1                    4.10.1-1                      0.35 MiB
testing/linux-firmware    20170217.12987ca-2          20170227.5abb924-1            0.26 MiB      40.51 MiB
testing/mesa              17.0.0-2                    17.0.0-3                      1.93 MiB       9.18 MiB
mesa-libgl                17.0.0-2                                                  0.00 MiB
testing/xf86-video-intel  1:2.99.917+757+g93942b7d-1  1:2.99.917+760+ge9cd8c21-1    0.00 MiB       0.66 MiB

Rebooted, everything worked fine so I installed the nvidia drivers (after uninstalling virtualbox because of a dependency clash):

sudo pacman -Sy nvidia 
...
testing/libglvnd                   0.2.999+g4ba53457-1    1.57 MiB       0.17 MiB
testing/linux         4.9.11-1     4.10.1-1               0.35 MiB      60.72 MiB
testing/nvidia-utils               378.13-5             101.96 MiB      21.34 MiB
testing/nvidia                     378.13-3               6.95 MiB       6.82 MiB

And added the following to /usr/share/sddm/scripts/Xsetup as per above:

xrandr --setprovideroutputsource modesetting NVIDIA-0
xrandr --auto

Rebooted and now the nvidia driver is running. I added the following to 20-nvidia.conf (the sole file in /etc/X11/xorg.conf.d) to fix a very small font size:

Section "Device"
    Identifier     "Device0"
    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 960M"

    Option         "DPI" "96 x 96"
    Option         "Coolbits" "12"
    Option         "TripleBuffer" "1"
EndSection

Everything seemed to work except steam (both steam and steam-native) which cannot start due to the following error:

libGL error: No matching fbConfigs or visuals found
libGL error: failed to load driver: swrast

I installed lib32-nvidia-libgl, replacing lib32-mesa-libgl:

:: lib32-nvidia-libgl and lib32-mesa-libgl are in conflict (lib32-libgl). Remove lib32-mesa-libgl? [y/N] y

Package (4)                  Old Version  New Version         Net Change  Download Size

multilib/lib32-libglvnd                   0.1.1.20161028-1.1    1.42 MiB       0.17 MiB
lib32-mesa-libgl             17.0.0-2                           0.00 MiB
multilib/lib32-nvidia-utils               378.13-1             91.82 MiB      19.46 MiB
multilib/lib32-nvidia-libgl               378.13-1              0.00 MiB       0.00 MiB

This broke sddm (it failed to come up on TTY1. `sudo journalctl -b` showed no errors). I tried to roll back by reinstalling lib32-mesa-libgl and uninstalling the lib32-nvidia-libgl dependencies:

sudo pacman -U /var/cache/pacman/pkg/lib32-mesa-libgl-17.0.0-2-x86_64.pkg.tar.xz
sudo pacman -Rs lib32-libglvnd lib32-nvidia-utils

sddm was still broken. I eventually fixed it by commenting out the Driver line in 20-nvidia.conf:

Section "Device"
    Identifier     "Device0"
#    Driver         "nvidia"
    VendorName     "NVIDIA Corporation"
    BoardName      "GeForce GTX 960M"

    Option         "DPI" "96 x 96"
    Option         "Coolbits" "12"
    Option         "TripleBuffer" "1"
EndSection

Now I'm not sure what to do. I don't know why commenting out my 20-nvidia.conf fixed sddm. The nvidia driver seems to be working, but without steam I have no reason to use it.
EDIT: Installing lib32-libglvnd doesn't make steam work, either.
EDIT 2: Installing lib32-nvidia-libgl while the Driver line above is commented is the key to getting steam to work. Games that previously ran slowly are now running great.

Also, am I supposed to add the new nvidia-drm-outputclass.conf to /etc/X11/xorg.conf.d/ or something like that?

-----

cotko wrote:

- transparency does not work any more: I have transparency enabled for yakuake and now it's opaque, while I resize/move a window, it became transparent, now it doesn't
- screen edges in kde (show all desktops/apps etc) are not working any more (they are still enabled, I've toggled them off and back on in kde's settings just to eliminate possibility to be a kde upgrade bug)

My transparency was broken at first, too. Try going to System Settings → Display and Monitor → Compositor and see if there's a message along the lines of "compositing has been disabled because something has repeatedly caused the display server to hang" alongside a button to re-enable the compositor.

Last edited by shvelven (2017-03-01 03:41:24)

lonaowna · 2017-03-01 07:16:53

@shvelven lib32-nvidia-libgl has been dropped in testing. You should remove that and install lib32-nvidia-utils + lib32-mesa + lib32-libglvnd. I'm not sure why that isn't working for you, but installing lib32-nvidia-libgl is not the correct solution.

shvelven · 2017-03-01 08:07:43

I already have those three installed:

warning: lib32-nvidia-utils-378.13-1 is up to date -- reinstalling
warning: lib32-mesa-17.0.0-2 is up to date -- reinstalling
warning: lib32-libglvnd-0.1.1.20161028-1.1 is up to date -- reinstalling

If I try to uninstall lib32-nvidia-libgl (with `pacman -Rs lib32-nvidia-libgl`) I get

checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: lib32-cairo: removing lib32-nvidia-libgl breaks dependency 'lib32-libgl'
:: lib32-freeglut: removing lib32-nvidia-libgl breaks dependency 'lib32-libgl'
:: lib32-glew1.10: removing lib32-nvidia-libgl breaks dependency 'lib32-libgl'
:: lib32-glu: removing lib32-nvidia-libgl breaks dependency 'lib32-libgl'
:: lib32-libva: removing lib32-nvidia-libgl breaks dependency 'lib32-libgl'
:: lib32-pango: removing lib32-nvidia-libgl breaks dependency 'lib32-libgl'
:: lib32-sdl2: removing lib32-nvidia-libgl breaks dependency 'lib32-libgl'
:: steam: removing lib32-nvidia-libgl breaks dependency 'lib32-libgl'

Does lib32-libglvnd provide lib32-libgl? Would the correct action be to uninstall lib32-nvidia-libgl with `pacman -Rc lib32-nvidia-libgl`, then reinstall the packages that depended on it?

cotko · 2017-03-01 08:29:50

Here is my Xorg.0.log:

[    42.719] 
X.Org X Server 1.19.1
Release Date: 2017-01-11
[    42.720] X Protocol Version 11, Revision 0
[    42.720] Build Operating System: Linux 4.8.14-1-ARCH x86_64 
[    42.720] Current Operating System: Linux cotko 4.10.1-1-ARCH #1 SMP PREEMPT Sun Feb 26 21:08:53 UTC 2017 x86_64
[    42.720] Kernel command line: root=PARTUUID=cc4ec7a9-2c97-406a-b4eb-f594ed000984 rootfstype=ext4 rw systemd.unit=graphical.target initrd=EFI\arch\initramfs-linux.img
[    42.720] Build Date: 14 February 2017  03:36:07AM
[    42.720]  
[    42.720] Current version of pixman: 0.34.0
[    42.720] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    42.720] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    42.720] (==) Log file: "/home/mitja/.local/share/xorg/Xorg.0.log", Time: Wed Mar  1 09:13:14 2017
[    42.723] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    42.723] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    42.724] (==) No Layout section.  Using the first Screen section.
[    42.724] (==) No screen section available. Using defaults.
[    42.724] (**) |-->Screen "Default Screen Section" (0)
[    42.724] (**) |   |-->Monitor "<default monitor>"
[    42.725] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    42.725] (**) |   |-->Device "Intel Graphics"
[    42.725] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    42.725] (==) Automatically adding devices
[    42.725] (==) Automatically enabling devices
[    42.725] (==) Automatically adding GPU devices
[    42.725] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    42.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    42.728] 	Entry deleted from font path.
[    42.728] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    42.728] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    42.728] 	Entry deleted from font path.
[    42.728] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    42.728] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    42.728] (==) ModulePath set to "/usr/lib/xorg/modules"
[    42.728] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    42.728] (II) Loader magic: 0x822d60
[    42.728] (II) Module ABI versions:
[    42.728] 	X.Org ANSI C Emulation: 0.4
[    42.728] 	X.Org Video Driver: 23.0
[    42.728] 	X.Org XInput driver : 24.1
[    42.728] 	X.Org Server Extension : 10.0
[    42.729] (++) using VT number 1

[    42.729] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    42.731] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    42.731] (II) xfree86: Adding drm device (/dev/dri/card0)
[    42.732] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    42.733] (--) PCI:*(0:0:2:0) 8086:0166:1043:2103 rev 9, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[    42.733] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    42.733] (II) LoadModule: "glx"
[    42.737] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    42.747] (II) Module glx: vendor="X.Org Foundation"
[    42.747] 	compiled for 1.19.1, module version = 1.0.0
[    42.747] 	ABI class: X.Org Server Extension, version 10.0
[    42.747] (II) LoadModule: "intel"
[    42.747] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    42.750] (II) Module intel: vendor="X.Org Foundation"
[    42.750] 	compiled for 1.19.1, module version = 2.99.917
[    42.750] 	Module class: X.Org Video Driver
[    42.750] 	ABI class: X.Org Video Driver, version 23.0
[    42.750] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    42.750] (II) intel: Driver for Intel(R) HD Graphics
[    42.750] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    42.750] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    42.750] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[    42.751] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[    42.751] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    42.751] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    42.751] (==) intel(0): RGB weight 888
[    42.751] (==) intel(0): Default visual is TrueColor
[    42.751] (**) intel(0): Option "AccelMethod" "uxa"
[    42.751] (**) intel(0): Option "DRI" "3"
[    42.751] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    42.751] (**) intel(0): Relaxed fencing enabled
[    42.751] (**) intel(0): Wait on SwapBuffers? enabled
[    42.751] (**) intel(0): Triple buffering? enabled
[    42.751] (**) intel(0): Framebuffer tiled
[    42.751] (**) intel(0): Pixmaps tiled
[    42.751] (**) intel(0): 3D buffers tiled
[    42.752] (**) intel(0): SwapBuffers wait enabled
[    42.752] (==) intel(0): video overlay key set to 0x101fe
[    42.752] (II) intel(0): Output LVDS1 has no monitor section
[    42.753] (--) intel(0): found backlight control interface intel_backlight
[    42.757] (II) intel(0): Output VGA1 has no monitor section
[    42.757] (II) intel(0): EDID for output LVDS1
[    42.757] (II) intel(0): Manufacturer: CMO  Model: 1720  Serial#: 0
[    42.757] (II) intel(0): Year: 2011  Week: 2
[    42.757] (II) intel(0): EDID Version: 1.4
[    42.757] (II) intel(0): Digital Display Input
[    42.757] (II) intel(0): 6 bits per channel
[    42.757] (II) intel(0): Digital interface is undefined
[    42.757] (II) intel(0): Max Image Size [cm]: horiz.: 38  vert.: 21
[    42.757] (II) intel(0): Gamma: 2.20
[    42.757] (II) intel(0): No DPMS capabilities specified
[    42.757] (II) intel(0): Supported color encodings: RGB 4:4:4 
[    42.757] (II) intel(0): First detailed timing is preferred mode
[    42.757] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    42.757] (II) intel(0): redX: 0.640 redY: 0.330   greenX: 0.300 greenY: 0.610
[    42.757] (II) intel(0): blueX: 0.150 blueY: 0.060   whiteX: 0.313 whiteY: 0.329
[    42.757] (II) intel(0): Manufacturer's mask: 0
[    42.757] (II) intel(0): Supported detailed timing:
[    42.757] (II) intel(0): clock: 140.5 MHz   Image Size:  382 x 215 mm
[    42.757] (II) intel(0): h_active: 1920  h_sync: 1972  h_sync_end 2007 h_blank_end 2094 h_border: 0
[    42.757] (II) intel(0): v_active: 1080  v_sync: 1083  v_sync_end 1089 v_blanking: 1118 v_border: 0
[    42.757] (II) intel(0): Supported detailed timing:
[    42.757] (II) intel(0): clock: 92.5 MHz   Image Size:  382 x 215 mm
[    42.757] (II) intel(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    42.757] (II) intel(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    42.757] (II) intel(0):  HC9GK173HGE
[    42.757] (II) intel(0): Unknown vendor-specific block 0
[    42.757] (II) intel(0): EDID (in hex):
[    42.757] (II) intel(0): 	00ffffffffffff000daf201700000000
[    42.758] (II) intel(0): 	021501049026157802ed95a3544c9c26
[    42.758] (II) intel(0): 	0f505400000001010101010101010101
[    42.758] (II) intel(0): 	010101010101e13680ae703826403423
[    42.758] (II) intel(0): 	36007ed71000001a1d2480a070381f40
[    42.758] (II) intel(0): 	302035007ed71000001a000000fe0048
[    42.758] (II) intel(0): 	4339474b803137334847450a00000000
[    42.758] (II) intel(0): 	000041319e0000000002010a202000f3
[    42.758] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    42.758] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    42.758] (II) intel(0): Printing probed modes for output LVDS1
[    42.758] (II) intel(0): Modeline "1920x1080"x60.0  140.49  1920 1972 2007 2094  1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
[    42.758] (II) intel(0): Modeline "1920x1080"x40.0   92.45  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)
[    42.758] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    42.758] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    42.758] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    42.758] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    42.758] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    42.758] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    42.758] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    42.763] (II) intel(0): EDID for output VGA1
[    42.763] (II) intel(0): Output LVDS1 connected
[    42.763] (II) intel(0): Output VGA1 disconnected
[    42.763] (II) intel(0): Using exact sizes for initial modes
[    42.763] (II) intel(0): Output LVDS1 using initial mode 1920x1080 +0+0
[    42.763] (II) intel(0): Kernel page flipping support detected, enabling
[    42.763] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    42.763] (==) intel(0): DPI set to (96, 96)
[    42.763] (II) Loading sub module "fb"
[    42.763] (II) LoadModule: "fb"
[    42.763] (II) Loading /usr/lib/xorg/modules/libfb.so
[    42.764] (II) Module fb: vendor="X.Org Foundation"
[    42.764] 	compiled for 1.19.1, module version = 1.0.0
[    42.764] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    42.764] (II) Loading sub module "dri2"
[    42.764] (II) LoadModule: "dri2"
[    42.764] (II) Module "dri2" already built-in
[    42.764] (II) Loading sub module "dri3"
[    42.764] (II) LoadModule: "dri3"
[    42.764] (II) Module "dri3" already built-in
[    42.764] (==) Depth 24 pixmap format is 32 bpp
[    42.764] (II) intel(0): Allocated new frame buffer 1920x1080 stride 7680, tiled
[    42.767] (II) UXA(0): Driver registered support for the following operations:
[    42.767] (II)         solid
[    42.767] (II)         copy
[    42.767] (II)         composite (RENDER acceleration)
[    42.767] (II)         put_image
[    42.767] (II)         get_image
[    42.767] (II) intel(0): [DRI2] Setup complete
[    42.767] (II) intel(0): [DRI2]   DRI driver: i965
[    42.767] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    42.767] (==) intel(0): Backing store enabled
[    42.767] (==) intel(0): Silken mouse enabled
[    42.767] (II) intel(0): Initializing HW Cursor
[    42.767] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    42.768] (==) intel(0): DPMS enabled
[    42.768] (==) intel(0): Intel XvMC decoder enabled
[    42.768] (II) intel(0): Set up textured video
[    42.768] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[    42.768] (II) intel(0): DRI2: Enabled
[    42.768] (II) intel(0): DRI3: Enabled
[    42.768] (==) intel(0): hotplug detection: "enabled"
[    42.798] (--) RandR disabled
[    42.829] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    42.829] (II) AIGLX: enabled GLX_ARB_create_context
[    42.829] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    42.829] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    42.829] (II) AIGLX: enabled GLX_INTEL_swap_event
[    42.829] (II) AIGLX: enabled GLX_SGI_swap_control
[    42.829] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    42.829] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    42.829] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    42.829] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    42.829] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    42.829] (II) AIGLX: Loaded and initialized i965
[    42.829] (II) GLX: Initialized DRI2 GL provider for screen 0
[    42.829] (II) intel(0): Setting screen physical size to 508 x 285
[    42.884] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    42.884] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    42.884] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    42.884] (II) LoadModule: "libinput"
[    42.884] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    42.889] (II) Module libinput: vendor="X.Org Foundation"
[    42.889] 	compiled for 1.19.1, module version = 0.24.0
[    42.889] 	Module class: X.Org XInput Driver
[    42.889] 	ABI class: X.Org XInput driver, version 24.1
[    42.889] (II) Using input driver 'libinput' for 'Power Button'
[    42.890] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 20 paused 0
[    42.890] (**) Power Button: always reports core events
[    42.890] (**) Option "Device" "/dev/input/event2"
[    42.890] (**) Option "_source" "server/udev"
[    42.890] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    42.890] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    42.890] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    42.890] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    42.890] (II) input device 'Power Button', /dev/input/event2 is tagged by udev as: Keyboard
[    42.890] (II) input device 'Power Button', /dev/input/event2 is a keyboard
[    42.891] (II) config/udev: Adding input device Asus Wireless Radio Control (/dev/input/event8)
[    42.891] (**) Asus Wireless Radio Control: Applying InputClass "evdev keyboard catchall"
[    42.891] (**) Asus Wireless Radio Control: Applying InputClass "libinput keyboard catchall"
[    42.891] (II) Using input driver 'libinput' for 'Asus Wireless Radio Control'
[    42.891] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 23 paused 0
[    42.891] (**) Asus Wireless Radio Control: always reports core events
[    42.891] (**) Option "Device" "/dev/input/event8"
[    42.891] (**) Option "_source" "server/udev"
[    42.892] (II) input device 'Asus Wireless Radio Control', /dev/input/event8 is tagged by udev as: Keyboard
[    42.892] (II) input device 'Asus Wireless Radio Control', /dev/input/event8 is a keyboard
[    42.892] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/ATK4001:00/input/input12/event8"
[    42.892] (II) XINPUT: Adding extended input device "Asus Wireless Radio Control" (type: KEYBOARD, id 7)
[    42.892] (II) input device 'Asus Wireless Radio Control', /dev/input/event8 is tagged by udev as: Keyboard
[    42.892] (II) input device 'Asus Wireless Radio Control', /dev/input/event8 is a keyboard
[    42.892] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    42.892] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    42.892] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    42.892] (II) Using input driver 'libinput' for 'Video Bus'
[    42.893] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 24 paused 0
[    42.893] (**) Video Bus: always reports core events
[    42.893] (**) Option "Device" "/dev/input/event4"
[    42.893] (**) Option "_source" "server/udev"
[    42.893] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[    42.893] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[    42.893] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input4/event4"
[    42.893] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    42.893] (II) input device 'Video Bus', /dev/input/event4 is tagged by udev as: Keyboard
[    42.893] (II) input device 'Video Bus', /dev/input/event4 is a keyboard
[    42.894] (II) config/udev: Adding input device Video Bus (/dev/input/event3)
[    42.894] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    42.894] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    42.894] (II) Using input driver 'libinput' for 'Video Bus'
[    42.894] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 25 paused 0
[    42.894] (**) Video Bus: always reports core events
[    42.894] (**) Option "Device" "/dev/input/event3"
[    42.894] (**) Option "_source" "server/udev"
[    42.895] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[    42.895] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[    42.895] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:02/LNXVIDEO:00/input/input3/event3"
[    42.895] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 9)
[    42.895] (II) input device 'Video Bus', /dev/input/event3 is tagged by udev as: Keyboard
[    42.895] (II) input device 'Video Bus', /dev/input/event3 is a keyboard
[    42.895] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    42.895] (II) No input driver specified, ignoring this device.
[    42.895] (II) This device may have been added with another device file.
[    42.895] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[    42.895] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[    42.895] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    42.895] (II) Using input driver 'libinput' for 'Sleep Button'
[    42.896] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 26 paused 0
[    42.896] (**) Sleep Button: always reports core events
[    42.896] (**) Option "Device" "/dev/input/event1"
[    42.896] (**) Option "_source" "server/udev"
[    42.896] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[    42.896] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[    42.896] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[    42.896] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    42.897] (II) input device 'Sleep Button', /dev/input/event1 is tagged by udev as: Keyboard
[    42.897] (II) input device 'Sleep Button', /dev/input/event1 is a keyboard
[    42.897] (II) config/udev: Adding input device Logitech M705 (/dev/input/event6)
[    42.897] (**) Logitech M705: Applying InputClass "evdev pointer catchall"
[    42.897] (**) Logitech M705: Applying InputClass "libinput pointer catchall"
[    42.897] (II) Using input driver 'libinput' for 'Logitech M705'
[    42.898] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 27 paused 0
[    42.898] (**) Logitech M705: always reports core events
[    42.898] (**) Option "Device" "/dev/input/event6"
[    42.898] (**) Option "_source" "server/udev"
[    42.898] (II) input device 'Logitech M705', /dev/input/event6 is tagged by udev as: Mouse
[    42.898] (II) Device 'Logitech M705' set to 800 DPI
[    42.898] (II) input device 'Logitech M705', /dev/input/event6 is a pointer caps
[    42.898] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.2/0003:046D:C52B.0003/0003:046D:101B.0004/input/input10/event6"
[    42.898] (II) XINPUT: Adding extended input device "Logitech M705" (type: MOUSE, id 11)
[    42.898] (**) Option "AccelerationScheme" "none"
[    42.898] (**) Logitech M705: (accel) selected scheme none/0
[    42.898] (**) Logitech M705: (accel) acceleration factor: 2.000
[    42.898] (**) Logitech M705: (accel) acceleration threshold: 4
[    42.899] (II) input device 'Logitech M705', /dev/input/event6 is tagged by udev as: Mouse
[    42.899] (II) Device 'Logitech M705' set to 800 DPI
[    42.899] (II) input device 'Logitech M705', /dev/input/event6 is a pointer caps
[    42.899] (II) config/udev: Adding input device Logitech M705 (/dev/input/mouse0)
[    42.899] (II) No input driver specified, ignoring this device.
[    42.899] (II) This device may have been added with another device file.
[    42.899] (II) config/udev: Adding input device ASUS USB2.0 Webcam (/dev/input/event10)
[    42.899] (**) ASUS USB2.0 Webcam: Applying InputClass "evdev keyboard catchall"
[    42.899] (**) ASUS USB2.0 Webcam: Applying InputClass "libinput keyboard catchall"
[    42.899] (II) Using input driver 'libinput' for 'ASUS USB2.0 Webcam'
[    42.900] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 28 paused 0
[    42.900] (**) ASUS USB2.0 Webcam: always reports core events
[    42.900] (**) Option "Device" "/dev/input/event10"
[    42.900] (**) Option "_source" "server/udev"
[    42.900] (II) input device 'ASUS USB2.0 Webcam', /dev/input/event10 is tagged by udev as: Keyboard
[    42.900] (II) input device 'ASUS USB2.0 Webcam', /dev/input/event10 is a keyboard
[    42.900] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input21/event10"
[    42.900] (II) XINPUT: Adding extended input device "ASUS USB2.0 Webcam" (type: KEYBOARD, id 12)
[    42.901] (II) input device 'ASUS USB2.0 Webcam', /dev/input/event10 is tagged by udev as: Keyboard
[    42.901] (II) input device 'ASUS USB2.0 Webcam', /dev/input/event10 is a keyboard
[    42.901] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[    42.901] (II) No input driver specified, ignoring this device.
[    42.901] (II) This device may have been added with another device file.
[    42.901] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[    42.901] (II) No input driver specified, ignoring this device.
[    42.901] (II) This device may have been added with another device file.
[    42.901] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    42.901] (II) No input driver specified, ignoring this device.
[    42.901] (II) This device may have been added with another device file.
[    42.901] (II) config/udev: Adding input device Asus WMI hotkeys (/dev/input/event7)
[    42.901] (**) Asus WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[    42.901] (**) Asus WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[    42.901] (II) Using input driver 'libinput' for 'Asus WMI hotkeys'
[    42.902] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 29 paused 0
[    42.902] (**) Asus WMI hotkeys: always reports core events
[    42.902] (**) Option "Device" "/dev/input/event7"
[    42.902] (**) Option "_source" "server/udev"
[    42.902] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[    42.902] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is a keyboard
[    42.902] (**) Option "config_info" "udev:/sys/devices/platform/asus-nb-wmi/input/input11/event7"
[    42.902] (II) XINPUT: Adding extended input device "Asus WMI hotkeys" (type: KEYBOARD, id 13)
[    42.903] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is tagged by udev as: Keyboard
[    42.903] (II) input device 'Asus WMI hotkeys', /dev/input/event7 is a keyboard
[    42.903] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event5)
[    42.903] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    42.903] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    42.903] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    42.904] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 30 paused 0
[    42.904] (**) AT Translated Set 2 keyboard: always reports core events
[    42.904] (**) Option "Device" "/dev/input/event5"
[    42.904] (**) Option "_source" "server/udev"
[    42.904] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard
[    42.904] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard
[    42.904] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input5/event5"
[    42.904] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    42.904] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is tagged by udev as: Keyboard
[    42.904] (II) input device 'AT Translated Set 2 keyboard', /dev/input/event5 is a keyboard
[    42.905] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event14)
[    42.905] (**) ETPS/2 Elantech Touchpad: Applying InputClass "evdev touchpad catchall"
[    42.905] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[    42.905] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad"
[    42.905] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[    42.905] (II) systemd-logind: got fd for /dev/input/event14 13:78 fd 31 paused 0
[    42.905] (**) ETPS/2 Elantech Touchpad: always reports core events
[    42.905] (**) Option "Device" "/dev/input/event14"
[    42.905] (**) Option "_source" "server/udev"
[    42.906] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event14 is tagged by udev as: Touchpad
[    42.906] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event14 is a touchpad
[    42.906] (**) Option "Tapping" "on"
[    42.906] (**) Option "NaturalScrolling" "true"
[    42.906] (**) Option "ButtonMapping" "1 3 2 4 5 6"
[    42.906] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input17/event14"
[    42.906] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[    42.906] (**) Option "AccelerationScheme" "none"
[    42.906] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[    42.906] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    42.906] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    42.906] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event14 is tagged by udev as: Touchpad
[    42.906] (II) input device 'ETPS/2 Elantech Touchpad', /dev/input/event14 is a touchpad
[    42.906] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    42.906] (**) ETPS/2 Elantech Touchpad: Applying InputClass "touchpad"
[    42.906] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[    42.906] (**) ETPS/2 Elantech Touchpad: always reports core events
[    42.906] (**) Option "Device" "/dev/input/mouse1"
[    42.906] (**) Option "_source" "server/udev"
[    42.960] (II) failed to create input device '/dev/input/mouse1'.
[    42.960] (EE) libinput: ETPS/2 Elantech Touchpad: Failed to create a device for /dev/input/mouse1
[    42.960] (EE) PreInit returned 2 for "ETPS/2 Elantech Touchpad"
[    42.960] (II) UnloadModule: "libinput"
[    42.960] (II) config/udev: Adding input device PC Speaker (/dev/input/event9)
[    42.960] (II) No input driver specified, ignoring this device.
[    42.960] (II) This device may have been added with another device file.
[    44.217] (II) intel(0): EDID vendor "CMO", prod id 5920
[    44.217] (II) intel(0): Printing DDC gathered Modelines:
[    44.217] (II) intel(0): Modeline "1920x1080"x0.0  140.49  1920 1972 2007 2094  1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
[    44.217] (II) intel(0): Modeline "1920x1080"x0.0   92.45  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)
[    44.222] (II) intel(0): EDID vendor "CMO", prod id 5920
[    44.222] (II) intel(0): Printing DDC gathered Modelines:
[    44.222] (II) intel(0): Modeline "1920x1080"x0.0  140.49  1920 1972 2007 2094  1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
[    44.222] (II) intel(0): Modeline "1920x1080"x0.0   92.45  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)
[    48.726] (II) intel(0): EDID vendor "CMO", prod id 5920
[    48.726] (II) intel(0): Printing DDC gathered Modelines:
[    48.726] (II) intel(0): Modeline "1920x1080"x0.0  140.49  1920 1972 2007 2094  1080 1083 1089 1118 +hsync -vsync (67.1 kHz eP)
[    48.726] (II) intel(0): Modeline "1920x1080"x0.0   92.45  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (44.4 kHz e)
[    49.490] (II) intel(0): Allocated new frame buffer 3840x1080 stride 15360, tiled

-----

shvelven wrote:

...
My transparency was broken at first, too. Try going to System Settings → Display and Monitor → Compositor and see if there's a message along the lines of "compositing has been disabled because something has repeatedly caused the display server to hang" alongside a button to re-enable the compositor.

Nope, no errors there, I have opengl 3 selected, I now tried all of them, both opengls are not working (3, 2) while Xrandr works. Anyways I'm on intel most of the time, running nvidia only using primusrun..

Arch Linux

#1 2017-02-27 19:55:19

[libglvnd] libglvnd support for mesa is now in testing

#2 2017-02-27 20:15:18

Re: [libglvnd] libglvnd support for mesa is now in testing

#3 2017-02-27 20:20:07

Re: [libglvnd] libglvnd support for mesa is now in testing

#4 2017-02-27 22:40:36

Re: [libglvnd] libglvnd support for mesa is now in testing

#5 2017-02-28 01:09:42

Re: [libglvnd] libglvnd support for mesa is now in testing

#6 2017-02-28 02:10:02

Re: [libglvnd] libglvnd support for mesa is now in testing

#7 2017-02-28 04:09:45

Re: [libglvnd] libglvnd support for mesa is now in testing

#8 2017-02-28 04:16:58

Re: [libglvnd] libglvnd support for mesa is now in testing

#9 2017-02-28 04:38:07

Re: [libglvnd] libglvnd support for mesa is now in testing

#10 2017-02-28 08:00:43

Re: [libglvnd] libglvnd support for mesa is now in testing

#11 2017-02-28 08:43:01

Re: [libglvnd] libglvnd support for mesa is now in testing

#12 2017-02-28 09:02:04

Re: [libglvnd] libglvnd support for mesa is now in testing

#13 2017-02-28 12:43:23

Re: [libglvnd] libglvnd support for mesa is now in testing

#14 2017-02-28 13:21:40

Re: [libglvnd] libglvnd support for mesa is now in testing

#15 2017-02-28 14:56:14

Re: [libglvnd] libglvnd support for mesa is now in testing

#16 2017-02-28 15:27:05

Re: [libglvnd] libglvnd support for mesa is now in testing

#17 2017-02-28 16:33:19

Re: [libglvnd] libglvnd support for mesa is now in testing

#18 2017-02-28 16:36:39

Re: [libglvnd] libglvnd support for mesa is now in testing

#19 2017-02-28 17:21:19

Re: [libglvnd] libglvnd support for mesa is now in testing

#20 2017-02-28 18:14:46

Re: [libglvnd] libglvnd support for mesa is now in testing

#21 2017-02-28 20:13:01

Re: [libglvnd] libglvnd support for mesa is now in testing

#22 2017-03-01 03:14:06

Re: [libglvnd] libglvnd support for mesa is now in testing

#23 2017-03-01 07:16:53

Re: [libglvnd] libglvnd support for mesa is now in testing

#24 2017-03-01 08:07:43

Re: [libglvnd] libglvnd support for mesa is now in testing

#25 2017-03-01 08:29:50

Re: [libglvnd] libglvnd support for mesa is now in testing

Board footer