You are not logged in.
Hi,
During normal work use -- browsers, Sublime, file manager etc, my laptop hanged.
My kernel is: 4.9.25-1-lts #1 SMP x86_64 GNU/Linux
Logs showed the following, kindly see if there is something I should be doing so this can be avoided:
----------------------------------------------------
May 04 17:31:00 keanu kernel: ------------[ cut here ]------------
May 04 17:31:00 keanu kernel: kernel BUG at fs/inode.c:508!
May 04 17:31:00 keanu kernel: invalid opcode: 0000 [#1] SMP
May 04 17:31:00 keanu kernel: Modules linked in: ctr ccm rfcomm fuse bnep uvcvideo nls_iso8859_1 nls_cp437 ath3k videobuf2_vmalloc videobuf2_memops btusb videobuf2_v4l2 videobuf2_core btrtl
May 04 17:31:00 keanu kernel: snd_hwdep snd_compress snd_pcm_dmaengine snd_soc_sst_acpi snd_pcm snd_soc_sst_match battery ac elan_i2c ac97_bus snd_timer 8250_dw fjes snd i2c_hid video sound
May 04 17:31:00 keanu kernel: CPU: 1 PID: 4454 Comm: SimpleCacheWork Tainted: G O 4.9.25-1-lts #1
May 04 17:31:00 keanu kernel: Hardware name: Acer Aspire E1-572/EA50_HW , BIOS V2.12 11/04/2013
May 04 17:31:00 keanu kernel: task: ffff8802dbc42ac0 task.stack: ffffc90004bc8000
May 04 17:31:00 keanu kernel: RIP: 0010:[<ffffffff812231a0>] [<ffffffff812231a0>] clear_inode+0x80/0x90
May 04 17:31:00 keanu kernel: RSP: 0018:ffffc90004bcbca8 EFLAGS: 00010002
May 04 17:31:00 keanu kernel: RAX: 0000000000000000 RBX: ffff880238affb40 RCX: ffff880345867000
May 04 17:31:00 keanu kernel: RDX: 0000000000000001 RSI: ffff880238affb40 RDI: ffff880238affcd0
May 04 17:31:00 keanu kernel: RBP: ffffc90004bcbcb0 R08: ffff8802fd0849c0 R09: 00000000590b1f04
May 04 17:31:00 keanu kernel: R10: 0000000000000000 R11: 0000000000000000 R12: 00000000005c9bbd
May 04 17:31:00 keanu kernel: R13: ffff880345867000 R14: 0000000000008180 R15: ffff880238affb40
May 04 17:31:00 keanu kernel: FS: 00007fe514c48700(0000) GS:ffff88035f240000(0000) knlGS:0000000000000000
May 04 17:31:00 keanu kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
May 04 17:31:00 keanu kernel: CR2: 00007fe541063d78 CR3: 00000003280d9000 CR4: 00000000001406e0
May 04 17:31:00 keanu kernel: Stack:
May 04 17:31:00 keanu kernel: ffff880238affb40 ffffc90004bcbcc8 ffffffffa0225d3a ffff88034dd3e3f0
May 04 17:31:00 keanu kernel: ffffc90004bcbd68 ffffffffa01fda03 0000000000000000 00000000f95db197
May 04 17:31:00 keanu kernel: ffff88034dd3e3f0 ffff880238affb40 ffffffffa02094d8 ffff88034dd3e3f0
May 04 17:31:00 keanu kernel: Call Trace:
May 04 17:31:00 keanu kernel: [<ffffffffa0225d3a>] ext4_clear_inode+0x1a/0x90 [ext4]
May 04 17:31:00 keanu kernel: [<ffffffffa01fda03>] ext4_free_inode+0xe3/0x640 [ext4]
May 04 17:31:00 keanu kernel: [<ffffffffa02094d8>] ? ext4_evict_inode+0x338/0x490 [ext4]
May 04 17:31:00 keanu kernel: [<ffffffffa0205d2a>] ? ext4_mark_inode_dirty+0x6a/0x220 [ext4]
May 04 17:31:00 keanu kernel: [<ffffffffa0209549>] ext4_evict_inode+0x3a9/0x490 [ext4]
May 04 17:31:00 keanu kernel: [<ffffffff81223f90>] evict+0xc0/0x190
May 04 17:31:00 keanu kernel: [<ffffffff812242f0>] iput+0x1b0/0x230
May 04 17:31:00 keanu kernel: [<ffffffff8121e8a4>] dentry_unlink_inode+0xb4/0x150
May 04 17:31:00 keanu kernel: [<ffffffff81220328>] __dentry_kill+0xb8/0x150
May 04 17:31:00 keanu kernel: [<ffffffff81220531>] dput+0x171/0x270
May 04 17:31:00 keanu kernel: [<ffffffff8120acf8>] __fput+0x138/0x1f0
May 04 17:31:00 keanu kernel: [<ffffffff8120adee>] ____fput+0xe/0x10
May 04 17:31:00 keanu kernel: [<ffffffff8109a570>] task_work_run+0x80/0xa0
May 04 17:31:00 keanu kernel: [<ffffffff81003613>] exit_to_usermode_loop+0xa3/0xb0
May 04 17:31:00 keanu kernel: [<ffffffff81003aa9>] syscall_return_slowpath+0x59/0x60
May 04 17:31:00 keanu kernel: [<ffffffff815fdb84>] entry_SYSCALL_64_fastpath+0xa7/0xa9
May 04 17:31:00 keanu kernel: Code: a8 20 74 2b a8 40 75 29 48 8b 83 30 01 00 00 48 8d 93 30 01 00 00 48 39 c2 75 18 48 c7 83 a0 00 00 00 60 00 00 00 5b 5d c3 0f 0b <0f> 0b 0f 0b 0f 0b 0f 0b
May 04 17:31:00 keanu kernel: RIP [<ffffffff812231a0>] clear_inode+0x80/0x90
May 04 17:31:00 keanu kernel: RSP <ffffc90004bcbca8>
May 04 17:31:00 keanu kernel: ---[ end trace 87de87f410777564 ]---
Last edited by arslanone (2017-05-06 05:51:40)
Offline
FIRTS OFF: secure all your really important data.
Next check the health condition of your disk: https://wiki.archlinux.org/index.php/S.M.A.R.T. - either there's a bug in ext4 or your disk is dying.
Also post a complete dmesg, look out for failed paging requests (RAM issue rather than disk one or kernel bug)
Offline
Thank you for your reply, I'll backup today.
Here is the complete output of dmesg:
--------------------------------------------------------------
[ 0.000000] Linux version 4.9.25-1-lts (builduser@andyrtr) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP Thu Apr 27 16:42:36 CEST 2017
[ 0.000000] Command line: initrd=\initramfs-linux-lts.img root=PARTUUID=04026d87-7c5f-41f9-9fc3-e2cd76f826f3 rw
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094caffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000094cb0000-0x00000000960affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000960b0000-0x000000009a6befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000035f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x93e18018-0x93e28057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000093e18017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093e18018-0x0000000093e28057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093e28058-0x0000000094caffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000094cb0000-0x00000000960affff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000960b0000-0x000000009a6befff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000035f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire E1-572/EA50_HW , BIOS V2.12 11/04/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x35f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
[ 0.000000] 7 base 035F600000 mask 7FFFE00000 uncachable
[ 0.000000] 8 base 035F800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 0360000000 mask 7FE0000000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01d58000, 0x01d58fff] PGTABLE
[ 0.000000] BRK [0x01d59000, 0x01d59fff] PGTABLE
[ 0.000000] BRK [0x01d5a000, 0x01d5afff] PGTABLE
[ 0.000000] BRK [0x01d5b000, 0x01d5bfff] PGTABLE
[ 0.000000] BRK [0x01d5c000, 0x01d5cfff] PGTABLE
[ 0.000000] BRK [0x01d5d000, 0x01d5dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7fa4d000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009AFFE014 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x000000009AFFE210 0000A4 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009AFF8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x000000009AFE4000 0102E7 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x000000009AFB9000 000040
[ 0.000000] ACPI: UEFI 0x000000009AFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x000000009AFFB000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x000000009AFFA000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 0x000000009AFF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x000000009AFF7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x000000009AFF6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x000000009AFF5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFE1000 002028 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 0x000000009AFDF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0x000000009AFDD000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DBGP 0x000000009AFDC000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDB000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDA000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFD6000 003B45 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: BGRT 0x000000009AFD5000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000035f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x35f5f8000-0x35f5fcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000035f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000087fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000094caffff]
[ 0.000000] node 0: [mem 0x00000000960b0000-0x000000009a6befff]
[ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000035f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000035f5fffff]
[ 0.000000] On node 0 totalpages: 3115078
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9739 pages used for memmap
[ 0.000000] DMA32 zone: 623296 pages, LIFO batch:31
[ 0.000000] Normal zone: 38872 pages used for memmap
[ 0.000000] Normal zone: 2487808 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93e18000-0x93e18fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93e28000-0x93e28fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x94cb0000-0x960affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a6bf000-0x9aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 34 pages/cpu @ffff88035f200000 s102232 r8192 d28840 u262144
[ 0.000000] pcpu-alloc: s102232 r8192 d28840 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3066382
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\initramfs-linux-lts.img root=PARTUUID=04026d87-7c5f-41f9-9fc3-e2cd76f826f3 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 12111616K/12460312K available (6153K kernel code, 1075K rwdata, 1944K rodata, 1280K init, 1032K bss, 348696K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.538 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.07 BogoMIPS (lpj=22945380)
[ 0.000026] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20160831
[ 0.011058] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.023428] Security Framework initialized
[ 0.023429] Yama: becoming mindful.
[ 0.024197] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.027235] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028585] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028599] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028853] CPU: Physical Processor ID: 0
[ 0.028854] CPU: Processor Core ID: 0
[ 0.028858] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028858] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028861] mce: CPU supports 7 MCE banks
[ 0.028869] CPU0: Thermal monitoring enabled (TM1)
[ 0.028882] process: using mwait in idle threads
[ 0.028885] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.028885] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.029205] Freeing SMP alternatives memory: 24K (ffffffff81c4e000 - ffffffff81c54000)
[ 0.040142] ftrace: allocating 24615 entries in 97 pages
[ 0.050963] smpboot: Max logical packages: 4
[ 0.051532] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.151541] TSC deadline timer enabled
[ 0.151543] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.151547] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.151578] ... version: 3
[ 0.151578] ... bit width: 48
[ 0.151579] ... generic registers: 4
[ 0.151579] ... value mask: 0000ffffffffffff
[ 0.151580] ... max period: 00007fffffffffff
[ 0.151580] ... fixed-purpose events: 3
[ 0.151581] ... event mask: 000000070000000f
[ 0.152142] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.152214] x86: Booting SMP configuration:
[ 0.152215] .... node #0, CPUs: #1 #2 #3
[ 0.603653] x86: Booted up 1 node, 4 CPUs
[ 0.603655] smpboot: Total of 4 processors activated (18357.81 BogoMIPS)
[ 0.607369] devtmpfs: initialized
[ 0.607427] x86/mm: Memory block size: 128MB
[ 0.609948] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.610007] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.610018] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.610062] pinctrl core: initialized pinctrl subsystem
[ 0.610106] RTC time: 3:52:11, date: 05/06/17
[ 0.610186] NET: Registered protocol family 16
[ 0.643670] cpuidle: using governor ladder
[ 0.693683] cpuidle: using governor menu
[ 0.693707] Simple Boot Flag at 0x44 set to 0x1
[ 0.693715] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.693716] ACPI: bus type PCI registered
[ 0.693717] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.693768] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.693770] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.693782] PCI: Using configuration type 1 for base access
[ 0.693812] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.731798] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.731799] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.731989] ACPI: Added _OSI(Module Device)
[ 0.731990] ACPI: Added _OSI(Processor Device)
[ 0.731991] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.731991] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.732199] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.737006] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.737859] ACPI: Dynamic OEM Table Load:
[ 0.737866] ACPI: SSDT 0xFFFF880352897400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.738177] ACPI: Dynamic OEM Table Load:
[ 0.738184] ACPI: SSDT 0xFFFF8803508A2000 0005AA (v01 PmRef ApIst 00003000 INTL 20120913)
[ 0.738535] ACPI: Dynamic OEM Table Load:
[ 0.738540] ACPI: SSDT 0xFFFF88035092EC00 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
[ 0.739376] ACPI : EC: EC started
[ 0.739377] ACPI : EC: interrupt blocked
[ 0.853758] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.853760] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x22, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.853761] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.853761] ACPI: Interpreter enabled
[ 0.853791] ACPI: (supports S0 S3 S4 S5)
[ 0.853792] ACPI: Using IOAPIC for interrupt routing
[ 0.853816] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.925014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.925018] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.925308] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.925309] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.925753] PCI host bridge to bus 0000:00
[ 0.925755] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.925757] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.925758] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.925759] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.925760] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.925761] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.925762] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.925762] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.925763] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.925764] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.925765] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.925766] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.925767] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.925768] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.925769] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.925770] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.925771] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.925772] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.925779] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.925946] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.925956] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[ 0.925962] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.925966] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.926120] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.926128] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit]
[ 0.926304] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.926319] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit]
[ 0.926371] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.926482] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.926516] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.926533] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061801f 64bit]
[ 0.926596] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.926745] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.926758] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit]
[ 0.926818] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.926931] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.926965] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[ 0.927023] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.927172] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.927207] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.927264] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.927416] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.928007] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff]
[ 0.928933] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.929057] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.929094] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.929334] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.929345] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.929351] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.929357] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.929362] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.929368] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.929374] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff]
[ 0.929405] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.929542] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.929554] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit]
[ 0.929571] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 0.929812] pci 0000:01:00.0: [14e4:16b3] type 00 class 0x020000
[ 0.929837] pci 0000:01:00.0: reg 0x10: [mem 0xb0410000-0xb041ffff 64bit pref]
[ 0.929855] pci 0000:01:00.0: reg 0x18: [mem 0xb0420000-0xb042ffff 64bit pref]
[ 0.929888] pci 0000:01:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[ 0.929983] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.930029] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.930098] pci 0000:01:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.930123] pci 0000:01:00.1: reg 0x10: [mem 0xb0400000-0xb040ffff 64bit pref]
[ 0.930249] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 0.953814] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.953822] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.953871] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.953894] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb057ffff 64bit]
[ 0.953944] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.954007] pci 0000:02:00.0: supports D1 D2
[ 0.954008] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.983784] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.983789] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 1.004316] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.004361] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.004402] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.004442] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.004483] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.004523] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.004563] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.004604] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.004779] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 1.004821] ACPI : EC: interrupt unblocked
[ 1.004828] ACPI : EC: event unblocked
[ 1.004834] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x22, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.004835] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.004991] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.004993] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.004995] vgaarb: loaded
[ 1.004995] vgaarb: bridge control possible 0000:00:02.0
[ 1.005051] Registered efivars operations
[ 1.046010] PCI: Using ACPI for IRQ routing
[ 1.051212] PCI: pci_cache_line_size set to 64 bytes
[ 1.051309] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 1.051310] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 1.051311] e820: reserve RAM buffer [mem 0x93e18018-0x93ffffff]
[ 1.051312] e820: reserve RAM buffer [mem 0x94cb0000-0x97ffffff]
[ 1.051313] e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
[ 1.051314] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 1.051315] e820: reserve RAM buffer [mem 0x35f600000-0x35fffffff]
[ 1.051403] NetLabel: Initializing
[ 1.051403] NetLabel: domain hash size = 128
[ 1.051404] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.051415] NetLabel: unlabeled traffic allowed by default
[ 1.051454] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.051459] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.053479] clocksource: Switched to clocksource hpet
[ 1.058511] VFS: Disk quotas dquot_6.6.0
[ 1.058526] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.058596] pnp: PnP ACPI init
[ 1.058738] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.058740] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 1.058741] system 00:00: [io 0xffff] has been reserved
[ 1.058742] system 00:00: [io 0xffff] has been reserved
[ 1.058743] system 00:00: [io 0xffff] has been reserved
[ 1.058744] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 1.058745] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.058748] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.058788] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.058831] system 00:02: [io 0x1854-0x1857] has been reserved
[ 1.058833] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.058858] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 1.058963] pnp 00:04: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
[ 1.073619] pnp 00:05: disabling [mem 0xffffffff-0x10000fffe] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfffff800-0xffffffff pref]
[ 1.073621] pnp 00:05: disabling [mem 0xffffffff-0x10000fffe disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
[ 1.073643] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.073644] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.073645] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.073646] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.073648] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.073649] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.073650] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.073651] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 1.073653] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 1.073654] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.073655] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 1.073657] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.073905] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.074316] pnp: PnP ACPI: found 7 devices
[ 1.080209] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.080213] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[ 1.080215] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.080236] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff]
[ 1.080239] pci 0000:01:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb007ff pref]
[ 1.080241] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.080245] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff]
[ 1.080247] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 1.080252] pci 0000:02:00.0: BAR 6: assigned [mem 0xb0580000-0xb058ffff pref]
[ 1.080254] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.080257] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 1.080264] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.080265] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.080266] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.080267] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.080268] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.080269] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.080270] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 1.080271] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 1.080272] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 1.080273] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 1.080274] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 1.080275] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 1.080276] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 1.080277] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 1.080278] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 1.080279] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 1.080280] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
[ 1.080281] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fbfffff]
[ 1.080282] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb04fffff 64bit pref]
[ 1.080283] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
[ 1.080395] NET: Registered protocol family 2
[ 1.080556] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.080733] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.080847] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.080873] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.080914] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.080979] NET: Registered protocol family 1
[ 1.080992] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.113632] PCI: CLS 64 bytes, default 64
[ 1.113670] Unpacking initramfs...
[ 1.209028] Freeing initrd memory: 5836K (ffff88007fa4d000 - ffff880080000000)
[ 1.209030] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.209032] software IO TLB [mem 0x8f0c0000-0x930c0000] (64MB) mapped at [ffff88008f0c0000-ffff8800930bffff]
[ 1.209201] Scanning for low memory corruption every 60 seconds
[ 1.209758] Initialise system trusted keyrings
[ 1.209835] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.211129] zbud: loaded
[ 1.211474] Key type asymmetric registered
[ 1.211501] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.211528] io scheduler noop registered
[ 1.211529] io scheduler deadline registered (default)
[ 1.211535] io scheduler cfq registered
[ 1.211928] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.211929] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.211930] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.211933] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 1.211945] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.211946] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.211949] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[ 1.211955] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.211959] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.211971] efifb: probing for efifb
[ 1.211980] efifb: framebuffer at 0xa0000000, using 4128k, total 4128k
[ 1.211981] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.211981] efifb: scrolling: redraw
[ 1.211983] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.214234] Console: switching to colour frame buffer device 170x48
[ 1.216330] fb0: EFI VGA frame buffer device
[ 1.216336] intel_idle: MWAIT substates: 0x11142120
[ 1.216337] intel_idle: v0.4.1 model 0x45
[ 1.216513] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.216680] GHES: HEST is not enabled!
[ 1.216739] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.217100] Linux agpgart interface v0.103
[ 1.217359] rtc_cmos 00:01: RTC can wake from S4
[ 1.217474] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.217498] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.217509] intel_pstate: Intel P-state driver initializing
[ 1.217699] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.218180] NET: Registered protocol family 10
[ 1.218666] NET: Registered protocol family 17
[ 1.219029] microcode: sig=0x40651, pf=0x40, revision=0x17
[ 1.219212] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.219716] registered taskstats version 1
[ 1.219730] Loading compiled-in X.509 certificates
[ 1.219761] zswap: loaded using pool lzo/zbud
[ 1.220450] Magic number: 1:99:866
[ 1.220600] rtc_cmos 00:01: setting system clock to 2017-05-06 03:52:11 UTC (1494042731)
[ 1.220749] PM: Hibernation image not present or could not be loaded.
[ 1.223367] Freeing unused kernel memory: 1280K (ffffffff81b0e000 - ffffffff81c4e000)
[ 1.223370] Write protecting the kernel read-only data: 10240k
[ 1.224479] Freeing unused kernel memory: 2024K (ffff880001606000 - ffff880001800000)
[ 1.225255] Freeing unused kernel memory: 104K (ffff8800019e6000 - ffff880001a00000)
[ 1.343604] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[ 1.344991] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.345026] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.345719] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.345733] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.347800] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.347814] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.347818] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.347981] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.347993] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.374644] sdhci: Secure Digital Host Controller Interface driver
[ 1.374645] sdhci: Copyright(c) Pierre Ossman
[ 1.376955] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.389941] sdhci-pci 0000:01:00.1: SDHCI controller found [14e4:16bc] (rev 1)
[ 1.391293] mmc0: SDHCI controller on PCI [0000:01:00.1] using ADMA 64-bit
[ 1.392795] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.392801] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.392979] ACPI: bus type USB registered
[ 1.393003] usbcore: registered new interface driver usbfs
[ 1.393015] usbcore: registered new interface driver hub
[ 1.393035] usbcore: registered new device driver usb
[ 1.394252] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.394260] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.395274] SCSI subsystem initialized
[ 1.395337] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 1.395343] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.395963] hub 1-0:1.0: USB hub found
[ 1.396064] hub 1-0:1.0: 9 ports detected
[ 1.396777] libata version 3.00 loaded.
[ 1.399404] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.399410] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.399589] hub 2-0:1.0: USB hub found
[ 1.399601] hub 2-0:1.0: 4 ports detected
[ 1.400624] ahci 0000:00:1f.2: version 3.0
[ 1.400779] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.404098] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.404318] ehci-pci: EHCI PCI platform driver
[ 1.410861] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 1.410864] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 1.411519] scsi host0: ahci
[ 1.411629] scsi host1: ahci
[ 1.411721] scsi host2: ahci
[ 1.411809] scsi host3: ahci
[ 1.411869] ata1: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b100 irq 43
[ 1.411871] ata2: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b180 irq 43
[ 1.411872] ata3: DUMMY
[ 1.411873] ata4: DUMMY
[ 1.412064] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.412070] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.412081] ehci-pci 0000:00:1d.0: debug port 2
[ 1.415979] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.415990] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000
[ 1.427728] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.443619] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.444130] hub 3-0:1.0: USB hub found
[ 1.444147] hub 3-0:1.0: 2 ports detected
[ 1.736361] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.742879] ata1.00: ATA-8: ST750LM022 HN-M750MBB, 2AR20002, max UDMA/133
[ 1.742883] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.749433] ata1.00: configured for UDMA/133
[ 1.749750] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0002 PQ: 0 ANSI: 5
[ 1.753602] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 1.803626] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.994729] hub 3-1:1.0: USB hub found
[ 1.994838] hub 3-1:1.0: 8 ports detected
[ 2.063656] usb 1-8: new high-speed USB device number 3 using xhci_hcd
[ 2.156281] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.158173] ata2.00: ATAPI: MATSHITADVD-RAM UJ8D2Q, 1.10, max UDMA/133
[ 2.160600] ata2.00: configured for UDMA/133
[ 2.164698] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8D2Q 1.10 PQ: 0 ANSI: 5
[ 2.187545] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 2.187549] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.187610] sd 0:0:0:0: [sda] Write Protect is off
[ 2.187615] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.187645] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.216052] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.216053] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.216205] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.233579] tsc: Refined TSC clocksource calibration: 2294.687 MHz
[ 2.233585] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139a22526, max_idle_ns: 440795252169 ns
[ 2.244689] sda: sda1 sda2 sda3 sda4
[ 2.245881] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.984670] random: fast init done
[ 3.228834] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.243797] clocksource: Switched to clocksource tsc
[ 4.383024] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.397704] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.397829] systemd[1]: Detected architecture x86-64.
[ 4.414370] systemd[1]: Set hostname to <keanu>.
[ 5.948591] systemd[1]: Configuration file /etc/systemd/system/locks.timer is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 5.958741] systemd[1]: Configuration file /etc/systemd/system/locks.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 5.979549] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.979701] systemd[1]: Listening on Journal Socket.
[ 5.980074] systemd[1]: Created slice User and Session Slice.
[ 5.980726] systemd[1]: Listening on Process Core Dump Socket.
[ 5.980823] systemd[1]: Listening on Journal Socket (/dev/log).
[ 6.288043] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 6.690636] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.690663] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.945782] vboxguest: loading out-of-tree module taints kernel.
[ 6.947255] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.037300] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.725690] [drm] Initialized
[ 7.865457] vboxguest: PCI device not found, probably running on physical hardware.
[ 8.092972] vboxdrv: Found 4 processor cores
[ 8.114244] vboxdrv: TSC mode is Invariant, tentative frequency 2294687086 Hz
[ 8.114247] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[ 8.136644] VBoxPciLinuxInit
[ 8.256786] vboxpci: IOMMU not found (not registered)
[ 8.284875] VBoxNetAdp: Successfully started.
[ 8.347339] VBoxNetFlt: Successfully started.
[ 8.595216] systemd-journald[165]: Received request to flush runtime journal from PID 1
[ 10.234618] wmi: Mapper loaded
[ 10.321857] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 10.467224] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input2
[ 10.467231] ACPI: Lid Switch [LID0]
[ 10.467361] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
[ 10.467366] ACPI: Power Button [PWRB]
[ 10.467469] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4
[ 10.467473] ACPI: Sleep Button [SLPB]
[ 10.467606] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 10.467610] ACPI: Power Button [PWRF]
[ 10.468657] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 10.487693] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 10.487717] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 10.609003] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.633727] [drm] Memory usable by graphics device = 2048M
[ 10.633731] checking generic (a0000000 408000) vs hw (a0000000 10000000)
[ 10.633732] fb: switching to inteldrmfb from EFI VGA
[ 10.633758] Console: switching to colour dummy device 80x25
[ 10.633826] [drm] Replacing VGA console driver
[ 10.640300] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.640302] [drm] Driver supports precise vblank timestamp query.
[ 10.642554] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.660405] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.660808] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 10.660845] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 10.663133] ACPI: AC Adapter [ACAD] (off-line)
[ 10.694039] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.694042] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.694044] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.694046] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 10.694047] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 10.694049] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x1b
[ 10.694051] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 10.811214] input: PC Speaker as /devices/platform/pcspkr/input/input8
[ 10.844225] ACPI: Battery Slot [BAT1] (battery present)
[ 10.855452] random: crng init done
[ 10.857516] pps_core: LinuxPPS API ver. 1 registered
[ 10.857518] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 10.860073] PTP clock support registered
[ 10.968958] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input7
[ 10.969160] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 10.969204] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 10.998081] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 10.998083] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 10.998084] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 10.998085] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 10.998086] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 11.257610] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.257611] fbcon: inteldrmfb (fb0) is primary device
[ 11.310927] tg3.c:v3.137 (May 11, 2014)
[ 11.357997] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 11.358047] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 11.358091] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 11.422161] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM57786) rev 57766001] (PCI Express) MAC address 20:1a:06:b2:7c:a9
[ 11.422163] tg3 0000:01:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 11.422164] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 11.422166] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 11.617922] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x454f00)
[ 11.633596] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 11.633616] acer_wmi: Function bitmap for Communication Button: 0x801
[ 11.636116] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[ 11.636177] input: Acer WMI hotkeys as /devices/virtual/input/input15
[ 11.636541] input: Acer BMA150 accelerometer as /devices/virtual/input/input16
[ 11.643953] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x16, 0x0c.
[ 11.650140] iTCO_vendor_support: vendor-support=0
[ 11.656766] AVX2 version of gcm_enc/dec engaged.
[ 11.656766] AES CTR mode by8 optimization enabled
[ 11.662778] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 11.662822] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 11.662948] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.669488] psmouse serio1: elantech: Elan sample query result 03, 64, 75
[ 11.790935] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 12.088029] ath: phy0: WB335 2-ANT card detected
[ 12.088031] ath: phy0: Set BT/WLAN RX diversity capability
[ 12.094735] ath: phy0: Enable LNA combining
[ 12.095824] ath: phy0: ASPM enabled: 0x42
[ 12.095826] ath: EEPROM regdomain: 0x65
[ 12.095826] ath: EEPROM indicates we should expect a direct regpair map
[ 12.095828] ath: Country alpha2 being used: 00
[ 12.095828] ath: Regpair used: 0x65
[ 12.120273] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.120655] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90002480000, irq=19
[ 12.415044] intel_rapl: Found RAPL domain package
[ 12.415047] intel_rapl: Found RAPL domain core
[ 12.415050] intel_rapl: Found RAPL domain uncore
[ 12.415052] intel_rapl: Found RAPL domain dram
[ 12.415059] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 12.689805] Console: switching to colour frame buffer device 170x48
[ 12.708450] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.901596] tg3 0000:01:00.0 enp1s0f0: renamed from eth0
[ 12.968687] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 13.001207] mousedev: PS/2 mouse device common for all mice
[ 13.283646] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k FS
[ 14.165398] Bluetooth: Core ver 2.22
[ 14.165420] NET: Registered protocol family 31
[ 14.165421] Bluetooth: HCI device and connection manager initialized
[ 14.165424] Bluetooth: HCI socket layer initialized
[ 14.165427] Bluetooth: L2CAP socket layer initialized
[ 14.165433] Bluetooth: SCO socket layer initialized
[ 14.285986] media: Linux media interface: v0.10
[ 14.332849] Linux video capture interface: v2.00
[ 14.624847] usbcore: registered new interface driver btusb
[ 14.644511] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b3f6)
[ 14.645724] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[ 14.645727] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[ 14.645729] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[ 14.645807] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input17
[ 14.645863] usbcore: registered new interface driver uvcvideo
[ 14.645864] USB Video Class driver (1.1.1)
[ 14.900737] usb 1-5: USB disconnect, device number 2
[ 14.900821] usbcore: registered new interface driver ath3k
[ 15.003451] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 15.284459] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 20.444830] usb 1-5: device descriptor read/64, error -110
[ 27.005757] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 27.005758] Bluetooth: BNEP filters: protocol multicast
[ 27.005762] Bluetooth: BNEP socket layer initialized
[ 52.685195] fuse init (API version 7.26)
[ 72.396885] Bluetooth: RFCOMM TTY layer initialized
[ 72.396890] Bluetooth: RFCOMM socket layer initialized
[ 72.396896] Bluetooth: RFCOMM ver 1.11
[ 95.618283] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 101.458777] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 102.760533] wlp2s0: authenticate with 9c:d9:17:1c:a2:16
[ 102.778073] wlp2s0: send auth to 9c:d9:17:1c:a2:16 (try 1/3)
[ 102.780278] wlp2s0: authenticated
[ 102.790148] wlp2s0: associate with 9c:d9:17:1c:a2:16 (try 1/3)
[ 102.802914] wlp2s0: RX AssocResp from 9c:d9:17:1c:a2:16 (capab=0x431 status=0 aid=1)
[ 102.803013] wlp2s0: associated
[ 102.803042] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
Last edited by arslanone (2017-05-06 05:49:42)
Offline
Use code tags when pasting to the boards: https://wiki.archlinux.org/index.php/Co … s_and_code
Moving to NC...
Offline
Thanks Jason. Apologies.
The result of short S.M.A.R.T. test:
# smartctl -H /dev/sda
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.25-1-lts] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
I've started the 'long' test and will post results in couple of hours.
Last edited by arslanone (2017-05-06 06:09:04)
Offline
Dump
smartctl -x /dev/sda
for present statistics.
dmesg has no problem indications but is also from a freshly booted system.
Dump it again after some uptime.
Offline
Thank you Seth. I'll post dmesg output after some uptime.
Here is the other output:
smartctl 6.5 2016-05-07 r4318 [x86_64-linux-4.9.25-1-lts] (local build)
Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate Samsung SpinPoint M8 (AF)
Device Model: ST750LM022 HN-M750MBB
Serial Number: S2Y1J9FDA03993
LU WWN Device Id: 5 0004cf 20b5a2f70
Firmware Version: 2AR20002
User Capacity: 750,156,374,016 bytes [750 GB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 2.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ATA8-ACS T13/1699-D revision 6
SATA Version is: SATA 3.0, 3.0 Gb/s (current: 3.0 Gb/s)
Local Time is: Sat May 6 11:26:35 2017 PKT
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
AAM level is: 254 (maximum performance), recommended: 254
APM level is: 254 (maximum performance)
Rd look-ahead is: Enabled
Write cache is: Enabled
ATA Security is: Disabled, frozen [SEC2]
Wt Cache Reorder: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x00) Offline data collection activity
was never started.
Auto Offline Data Collection: Disabled.
Self-test execution status: ( 248) Self-test routine in progress...
80% of test remaining.
Total time to complete Offline
data collection: ( 9960) seconds.
Offline data collection
capabilities: (0x5b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
No Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 166) minutes.
SCT capabilities: (0x003f) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
1 Raw_Read_Error_Rate POSR-K 100 100 051 - 1
2 Throughput_Performance -OS--K 252 252 000 - 0
3 Spin_Up_Time PO---K 090 088 025 - 3105
4 Start_Stop_Count -O--CK 097 097 000 - 3109
5 Reallocated_Sector_Ct PO--CK 252 252 010 - 0
7 Seek_Error_Rate -OSR-K 252 252 051 - 0
8 Seek_Time_Performance --S--K 252 252 015 - 0
9 Power_On_Hours -O--CK 100 100 000 - 6538
10 Spin_Retry_Count -O--CK 252 252 051 - 0
12 Power_Cycle_Count -O--CK 099 099 000 - 1662
191 G-Sense_Error_Rate -O---K 100 100 000 - 509
192 Power-Off_Retract_Count -O---K 252 252 000 - 0
194 Temperature_Celsius -O---- 054 052 000 - 46 (Min/Max 6/48)
195 Hardware_ECC_Recovered -O-RCK 100 100 000 - 0
196 Reallocated_Event_Count -O--CK 252 252 000 - 0
197 Current_Pending_Sector -O--CK 252 252 000 - 0
198 Offline_Uncorrectable ----CK 252 252 000 - 0
199 UDMA_CRC_Error_Count -OS-CK 200 200 000 - 0
200 Multi_Zone_Error_Rate -O-R-K 100 100 000 - 214
223 Load_Retry_Count -O--CK 100 100 000 - 77
225 Load_Cycle_Count -O--CK 094 094 000 - 61171
||||||_ K auto-keep
|||||__ C event count
||||___ R error rate
|||____ S speed/performance
||_____ O updated online
|______ P prefailure warning
General Purpose Log Directory Version 1
SMART Log Directory Version 1 [multi-sector log support]
Address Access R/W Size Description
0x00 GPL,SL R/O 1 Log Directory
0x01 SL R/O 1 Summary SMART error log
0x02 SL R/O 2 Comprehensive SMART error log
0x03 GPL R/O 2 Ext. Comprehensive SMART error log
0x06 SL R/O 1 SMART self-test log
0x07 GPL R/O 2 Extended self-test log
0x08 GPL R/O 2 Power Conditions log
0x09 SL R/W 1 Selective self-test log
0x10 GPL R/O 1 SATA NCQ Queued Error log
0x11 GPL R/O 1 SATA Phy Event Counters log
0x80-0x9f GPL,SL R/W 16 Host vendor specific log
0xc0-0xdf GPL,SL VS 16 Device vendor specific log
0xe0 GPL,SL R/W 1 SCT Command/Status
0xe1 GPL,SL R/W 1 SCT Data Transfer
SMART Extended Comprehensive Error Log Version: 1 (2 sectors)
No Errors Logged
SMART Extended Self-test Log Version: 1 (2 sectors)
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 6538 -
# 2 Extended offline Aborted by host 90% 6538 -
SMART Selective self-test log data structure revision number 0
Note: revision number not 1 implies that no selective self-test has ever been run
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Self_test_in_progress [80% left] (0-65535)
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
SCT Status Version: 2
SCT Version (vendor specific): 256 (0x0100)
SCT Support Level: 1
Device State: Active (0)
Current Temperature: 46 Celsius
Power Cycle Min/Max Temperature: 27/46 Celsius
Lifetime Min/Max Temperature: 6/49 Celsius
Under/Over Temperature Limit Count: 0/0
SCT Temperature History Version: 2
Temperature Sampling Period: 5 minutes
Temperature Logging Interval: 5 minutes
Min/Max recommended Temperature: -5/80 Celsius
Min/Max Temperature Limit: -10/85 Celsius
Temperature History Size (Index): 128 (6)
Index Estimated Time Temperature Celsius
7 2017-05-06 00:50 46 ***************************
8 2017-05-06 00:55 34 ***************
... ..( 11 skipped). .. ***************
20 2017-05-06 01:55 34 ***************
21 2017-05-06 02:00 33 **************
... ..( 19 skipped). .. **************
41 2017-05-06 03:40 33 **************
42 2017-05-06 03:45 34 ***************
... ..( 4 skipped). .. ***************
47 2017-05-06 04:10 34 ***************
48 2017-05-06 04:15 35 ****************
... ..( 2 skipped). .. ****************
51 2017-05-06 04:30 35 ****************
52 2017-05-06 04:35 36 *****************
... ..( 10 skipped). .. *****************
63 2017-05-06 05:30 36 *****************
64 2017-05-06 05:35 37 ******************
... ..( 12 skipped). .. ******************
77 2017-05-06 06:40 37 ******************
78 2017-05-06 06:45 36 *****************
79 2017-05-06 06:50 36 *****************
80 2017-05-06 06:55 36 *****************
81 2017-05-06 07:00 37 ******************
... ..( 7 skipped). .. ******************
89 2017-05-06 07:40 37 ******************
90 2017-05-06 07:45 36 *****************
... ..( 2 skipped). .. *****************
93 2017-05-06 08:00 36 *****************
94 2017-05-06 08:05 35 ****************
95 2017-05-06 08:10 34 ***************
96 2017-05-06 08:15 34 ***************
97 2017-05-06 08:20 33 **************
... ..( 3 skipped). .. **************
101 2017-05-06 08:40 33 **************
102 2017-05-06 08:45 32 *************
... ..( 7 skipped). .. *************
110 2017-05-06 09:25 32 *************
111 2017-05-06 09:30 31 ************
112 2017-05-06 09:35 33 **************
... ..( 2 skipped). .. **************
115 2017-05-06 09:50 33 **************
116 2017-05-06 09:55 31 ************
117 2017-05-06 10:00 33 **************
... ..( 4 skipped). .. **************
122 2017-05-06 10:25 33 **************
123 2017-05-06 10:30 34 ***************
124 2017-05-06 10:35 34 ***************
125 2017-05-06 10:40 34 ***************
126 2017-05-06 10:45 35 ****************
127 2017-05-06 10:50 31 ************
0 2017-05-06 10:55 34 ***************
1 2017-05-06 11:00 37 ******************
2 2017-05-06 11:05 40 *********************
3 2017-05-06 11:10 43 ************************
4 2017-05-06 11:15 44 *************************
5 2017-05-06 11:20 45 **************************
6 2017-05-06 11:25 46 ***************************
SCT Error Recovery Control:
Read: Disabled
Write: Disabled
Device Statistics (GP/SMART Log 0x04) not supported
SATA Phy Event Counters (GP Log 0x11)
ID Size Value Description
0x0001 4 0 Command failed due to ICRC error
0x0002 4 0 R_ERR response for data FIS
0x0003 4 0 R_ERR response for device-to-host data FIS
0x0004 4 0 R_ERR response for host-to-device data FIS
0x0005 4 0 R_ERR response for non-data FIS
0x0006 4 0 R_ERR response for device-to-host non-data FIS
0x0007 4 0 R_ERR response for host-to-device non-data FIS
0x0008 4 0 Device-to-host non-data FIS retries
0x0009 4 33 Transition from drive PhyRdy to drive PhyNRdy
0x000a 4 1 Device-to-host register FISes sent due to a COMRESET
0x000b 4 0 CRC errors within host-to-device FIS
0x000d 4 0 Non-CRC errors within host-to-device FIS
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC
0x8e00 4 0 Vendor specific
0x8e01 4 0 Vendor specific
0x8e02 4 0 Vendor specific
0x8e03 4 0 Vendor specific
0x8e04 4 0 Vendor specific
0x8e05 4 0 Vendor specific
0x8e06 4 0 Vendor specific
0x8e07 4 0 Vendor specific
0x8e08 4 0 Vendor specific
0x8e09 4 0 Vendor specific
0x8e0a 4 0 Vendor specific
0x8e0b 4 0 Vendor specific
0x8e0c 4 0 Vendor specific
0x8e0d 4 0 Vendor specific
0x8e0e 4 0 Vendor specific
0x8e0f 4 0 Vendor specific
0x8e10 4 0 Vendor specific
0x8e11 4 0 Vendor specific
Offline
Disk and connection look healthy, so it's indeed (rather) either a kernel bug or a memory issue.
Ceterum censeo: https://wiki.archlinux.org/index.php/Microcode
Offline
Thank you seth, I installed the Intel microcode, rebooted and it's working:
dmesg | grep microcode
[ 0.000000] microcode: microcode updated early to revision 0x1f, date = 2016-04-01
[ 1.555241] microcode: sig=0x40651, pf=0x40, revision=0x1f
[ 1.555429] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
Only thing left now is I post dmesg output after a decent uptime.
Offline
Hi,
Here are two dmesg outputs:
[ 0.000000] microcode: microcode updated early to revision 0x1f, date = 2016-04-01
[ 0.000000] Linux version 4.9.26-1-lts (builduser@andyrtr) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP Thu May 4 18:46:21 CEST 2017
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=PARTUUID=04026d87-7c5f-41f9-9fc3-e2cd76f826f3 rw
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094caffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000094cb0000-0x00000000960affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000960b0000-0x000000009a6befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000035f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x93e18018-0x93e28057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000093e18017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093e18018-0x0000000093e28057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093e28058-0x0000000094caffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000094cb0000-0x00000000960affff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000960b0000-0x000000009a6befff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000035f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire E1-572/EA50_HW , BIOS V2.12 11/04/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x35f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
[ 0.000000] 7 base 035F600000 mask 7FFFE00000 uncachable
[ 0.000000] 8 base 035F800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 0360000000 mask 7FE0000000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01d58000, 0x01d58fff] PGTABLE
[ 0.000000] BRK [0x01d59000, 0x01d59fff] PGTABLE
[ 0.000000] BRK [0x01d5a000, 0x01d5afff] PGTABLE
[ 0.000000] BRK [0x01d5b000, 0x01d5bfff] PGTABLE
[ 0.000000] BRK [0x01d5c000, 0x01d5cfff] PGTABLE
[ 0.000000] BRK [0x01d5d000, 0x01d5dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f95d000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009AFFE014 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x000000009AFFE210 0000A4 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009AFF8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x000000009AFE4000 0102E7 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x000000009AFB9000 000040
[ 0.000000] ACPI: UEFI 0x000000009AFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x000000009AFFB000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x000000009AFFA000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 0x000000009AFF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x000000009AFF7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x000000009AFF6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x000000009AFF5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFE1000 002028 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 0x000000009AFDF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0x000000009AFDD000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DBGP 0x000000009AFDC000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDB000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDA000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFD6000 003B45 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: BGRT 0x000000009AFD5000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000035f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x35f5f8000-0x35f5fcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000035f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000087fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000094caffff]
[ 0.000000] node 0: [mem 0x00000000960b0000-0x000000009a6befff]
[ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000035f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000035f5fffff]
[ 0.000000] On node 0 totalpages: 3115078
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9739 pages used for memmap
[ 0.000000] DMA32 zone: 623296 pages, LIFO batch:31
[ 0.000000] Normal zone: 38872 pages used for memmap
[ 0.000000] Normal zone: 2487808 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93e18000-0x93e18fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93e28000-0x93e28fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x94cb0000-0x960affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a6bf000-0x9aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 34 pages/cpu @ffff88035f200000 s102232 r8192 d28840 u262144
[ 0.000000] pcpu-alloc: s102232 r8192 d28840 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3066382
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=PARTUUID=04026d87-7c5f-41f9-9fc3-e2cd76f826f3 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 12110656K/12460312K available (6153K kernel code, 1075K rwdata, 1944K rodata, 1280K init, 1032K bss, 349656K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.924 MHz processor
[ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.84 BogoMIPS (lpj=22949240)
[ 0.000026] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20160831
[ 0.011047] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.023404] Security Framework initialized
[ 0.023405] Yama: becoming mindful.
[ 0.024174] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.027217] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028567] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028581] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028835] CPU: Physical Processor ID: 0
[ 0.028836] CPU: Processor Core ID: 0
[ 0.028840] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028840] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028844] mce: CPU supports 7 MCE banks
[ 0.028852] CPU0: Thermal monitoring enabled (TM1)
[ 0.028865] process: using mwait in idle threads
[ 0.028867] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.028868] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.029186] Freeing SMP alternatives memory: 24K (ffffffff81c4e000 - ffffffff81c54000)
[ 0.039178] ftrace: allocating 24615 entries in 97 pages
[ 0.050017] smpboot: Max logical packages: 4
[ 0.050600] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.150611] TSC deadline timer enabled
[ 0.150613] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.150617] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.150647] ... version: 3
[ 0.150648] ... bit width: 48
[ 0.150648] ... generic registers: 4
[ 0.150649] ... value mask: 0000ffffffffffff
[ 0.150649] ... max period: 00007fffffffffff
[ 0.150650] ... fixed-purpose events: 3
[ 0.150650] ... event mask: 000000070000000f
[ 0.151208] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.151282] x86: Booting SMP configuration:
[ 0.151282] .... node #0, CPUs: #1 #2 #3
[ 0.602723] x86: Booted up 1 node, 4 CPUs
[ 0.602725] smpboot: Total of 4 processors activated (18360.90 BogoMIPS)
[ 0.606460] devtmpfs: initialized
[ 0.606518] x86/mm: Memory block size: 128MB
[ 0.609048] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.609107] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.609118] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.609163] pinctrl core: initialized pinctrl subsystem
[ 0.609207] RTC time: 14:48:32, date: 05/11/17
[ 0.609286] NET: Registered protocol family 16
[ 0.642740] cpuidle: using governor ladder
[ 0.692753] cpuidle: using governor menu
[ 0.692779] Simple Boot Flag at 0x44 set to 0x1
[ 0.692787] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.692788] ACPI: bus type PCI registered
[ 0.692789] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.692841] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.692843] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.692854] PCI: Using configuration type 1 for base access
[ 0.692886] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.730866] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.730867] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.731057] ACPI: Added _OSI(Module Device)
[ 0.731058] ACPI: Added _OSI(Processor Device)
[ 0.731058] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.731059] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.731266] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.736106] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.736955] ACPI: Dynamic OEM Table Load:
[ 0.736962] ACPI: SSDT 0xFFFF880352897400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.737276] ACPI: Dynamic OEM Table Load:
[ 0.737283] ACPI: SSDT 0xFFFF8803508A2000 0005AA (v01 PmRef ApIst 00003000 INTL 20120913)
[ 0.737633] ACPI: Dynamic OEM Table Load:
[ 0.737637] ACPI: SSDT 0xFFFF88035092EC00 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
[ 0.738475] ACPI : EC: EC started
[ 0.738476] ACPI : EC: interrupt blocked
[ 0.852828] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.852829] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x22, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.852830] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.852831] ACPI: Interpreter enabled
[ 0.852859] ACPI: (supports S0 S3 S4 S5)
[ 0.852859] ACPI: Using IOAPIC for interrupt routing
[ 0.852884] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.925180] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.925184] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.925479] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.925480] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.925921] PCI host bridge to bus 0000:00
[ 0.925923] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.925924] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.925925] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.925926] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.925927] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.925928] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.925929] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.925930] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.925931] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.925932] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.925933] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.925933] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.925934] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.925935] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.925936] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.925937] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.925938] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.925939] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.925946] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.926114] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.926123] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[ 0.926130] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.926134] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.926289] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.926297] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit]
[ 0.926473] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.926488] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit]
[ 0.926541] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.926652] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.926686] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.926704] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061801f 64bit]
[ 0.926766] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.926915] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.926928] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit]
[ 0.926988] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.927100] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.927135] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[ 0.927193] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.927342] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.927377] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.927434] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.927587] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.929220] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff]
[ 0.930146] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.930271] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.930309] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.930548] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.930559] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.930565] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.930571] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.930577] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.930583] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.930589] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff]
[ 0.930619] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.930757] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.930769] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit]
[ 0.930786] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 0.931027] pci 0000:01:00.0: [14e4:16b3] type 00 class 0x020000
[ 0.931053] pci 0000:01:00.0: reg 0x10: [mem 0xb0410000-0xb041ffff 64bit pref]
[ 0.931071] pci 0000:01:00.0: reg 0x18: [mem 0xb0420000-0xb042ffff 64bit pref]
[ 0.931104] pci 0000:01:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[ 0.931199] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.931245] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.931314] pci 0000:01:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.931339] pci 0000:01:00.1: reg 0x10: [mem 0xb0400000-0xb040ffff 64bit pref]
[ 0.931466] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 0.962884] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.962891] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.962940] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.962963] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb057ffff 64bit]
[ 0.963013] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.963076] pci 0000:02:00.0: supports D1 D2
[ 0.963077] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.992854] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.992859] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 1.013383] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.013428] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.013469] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.013509] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.013549] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.013589] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.013630] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.013670] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.013845] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 1.013887] ACPI : EC: interrupt unblocked
[ 1.013894] ACPI : EC: event unblocked
[ 1.013900] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x22, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.013901] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.014056] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.014057] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.014059] vgaarb: loaded
[ 1.014060] vgaarb: bridge control possible 0000:00:02.0
[ 1.014116] Registered efivars operations
[ 1.055431] PCI: Using ACPI for IRQ routing
[ 1.060620] PCI: pci_cache_line_size set to 64 bytes
[ 1.060717] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 1.060718] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 1.060719] e820: reserve RAM buffer [mem 0x93e18018-0x93ffffff]
[ 1.060720] e820: reserve RAM buffer [mem 0x94cb0000-0x97ffffff]
[ 1.060721] e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
[ 1.060722] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 1.060723] e820: reserve RAM buffer [mem 0x35f600000-0x35fffffff]
[ 1.060811] NetLabel: Initializing
[ 1.060812] NetLabel: domain hash size = 128
[ 1.060812] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.060823] NetLabel: unlabeled traffic allowed by default
[ 1.060864] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.060869] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.062889] clocksource: Switched to clocksource hpet
[ 1.067887] VFS: Disk quotas dquot_6.6.0
[ 1.067905] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.067974] pnp: PnP ACPI init
[ 1.068116] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.068118] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 1.068119] system 00:00: [io 0xffff] has been reserved
[ 1.068121] system 00:00: [io 0xffff] has been reserved
[ 1.068122] system 00:00: [io 0xffff] has been reserved
[ 1.068123] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 1.068124] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.068127] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.068167] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.068209] system 00:02: [io 0x1854-0x1857] has been reserved
[ 1.068211] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.068236] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 1.068339] pnp 00:04: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
[ 1.083024] pnp 00:05: disabling [mem 0xffffffff-0x10000fffe] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfffff800-0xffffffff pref]
[ 1.083027] pnp 00:05: disabling [mem 0xffffffff-0x10000fffe disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
[ 1.083048] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.083049] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.083050] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.083051] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.083053] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.083054] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.083055] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.083056] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 1.083058] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 1.083059] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.083060] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 1.083062] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.083309] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.083719] pnp: PnP ACPI: found 7 devices
[ 1.089568] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.089572] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[ 1.089574] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.089595] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff]
[ 1.089597] pci 0000:01:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb007ff pref]
[ 1.089599] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.089603] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff]
[ 1.089606] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 1.089611] pci 0000:02:00.0: BAR 6: assigned [mem 0xb0580000-0xb058ffff pref]
[ 1.089612] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.089615] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 1.089622] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.089623] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.089624] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.089625] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.089626] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.089627] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.089628] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 1.089629] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 1.089630] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 1.089631] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 1.089632] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 1.089633] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 1.089634] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 1.089635] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 1.089636] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 1.089637] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 1.089638] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
[ 1.089639] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fbfffff]
[ 1.089640] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb04fffff 64bit pref]
[ 1.089641] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
[ 1.089752] NET: Registered protocol family 2
[ 1.089912] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.090088] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.090205] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.090231] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.090272] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.090341] NET: Registered protocol family 1
[ 1.090353] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.123033] PCI: CLS 64 bytes, default 64
[ 1.123072] Unpacking initramfs...
[ 1.218670] Freeing initrd memory: 6796K (ffff88007f95d000 - ffff880080000000)
[ 1.218672] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.218674] software IO TLB [mem 0x8f0c0000-0x930c0000] (64MB) mapped at [ffff88008f0c0000-ffff8800930bffff]
[ 1.218846] Scanning for low memory corruption every 60 seconds
[ 1.219415] Initialise system trusted keyrings
[ 1.219493] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.220794] zbud: loaded
[ 1.221136] Key type asymmetric registered
[ 1.221163] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.221183] io scheduler noop registered
[ 1.221183] io scheduler deadline registered (default)
[ 1.221190] io scheduler cfq registered
[ 1.221568] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.221569] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.221570] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.221573] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 1.221586] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.221587] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.221589] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[ 1.221596] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.221599] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.221609] efifb: probing for efifb
[ 1.221618] efifb: framebuffer at 0xa0000000, using 4128k, total 4128k
[ 1.221619] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.221620] efifb: scrolling: redraw
[ 1.221621] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.223871] Console: switching to colour frame buffer device 170x48
[ 1.225968] fb0: EFI VGA frame buffer device
[ 1.225974] intel_idle: MWAIT substates: 0x11142120
[ 1.225975] intel_idle: v0.4.1 model 0x45
[ 1.226150] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.226319] GHES: HEST is not enabled!
[ 1.226373] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.226728] Linux agpgart interface v0.103
[ 1.226986] rtc_cmos 00:01: RTC can wake from S4
[ 1.227101] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.227125] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.227135] intel_pstate: Intel P-state driver initializing
[ 1.227354] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.227872] NET: Registered protocol family 10
[ 1.228380] NET: Registered protocol family 17
[ 1.228762] microcode: sig=0x40651, pf=0x40, revision=0x1f
[ 1.228947] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.229415] registered taskstats version 1
[ 1.229430] Loading compiled-in X.509 certificates
[ 1.229460] zswap: loaded using pool lzo/zbud
[ 1.230164] Magic number: 1:93:839
[ 1.230317] rtc_cmos 00:01: setting system clock to 2017-05-11 14:48:33 UTC (1494514113)
[ 1.230469] PM: Hibernation image not present or could not be loaded.
[ 1.233128] Freeing unused kernel memory: 1280K (ffffffff81b0e000 - ffffffff81c4e000)
[ 1.233130] Write protecting the kernel read-only data: 10240k
[ 1.234257] Freeing unused kernel memory: 2024K (ffff880001606000 - ffff880001800000)
[ 1.235033] Freeing unused kernel memory: 104K (ffff8800019e6000 - ffff880001a00000)
[ 1.362588] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[ 1.364082] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.364118] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.364793] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.364806] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.366813] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.366826] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.366830] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.367006] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.367019] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.393484] sdhci: Secure Digital Host Controller Interface driver
[ 1.393485] sdhci: Copyright(c) Pierre Ossman
[ 1.394878] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.410376] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.410381] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.410655] sdhci-pci 0000:01:00.1: SDHCI controller found [14e4:16bc] (rev 1)
[ 1.411888] ACPI: bus type USB registered
[ 1.411911] usbcore: registered new interface driver usbfs
[ 1.411921] usbcore: registered new interface driver hub
[ 1.411941] usbcore: registered new device driver usb
[ 1.412047] mmc0: SDHCI controller on PCI [0000:01:00.1] using ADMA 64-bit
[ 1.412486] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.412761] ehci-pci: EHCI PCI platform driver
[ 1.412943] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.412949] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.412961] ehci-pci 0000:00:1d.0: debug port 2
[ 1.414046] SCSI subsystem initialized
[ 1.415462] libata version 3.00 loaded.
[ 1.416866] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.416881] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000
[ 1.442898] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.443214] hub 1-0:1.0: USB hub found
[ 1.443229] hub 1-0:1.0: 2 ports detected
[ 1.443638] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.443644] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.444711] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 1.444715] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.444946] hub 2-0:1.0: USB hub found
[ 1.444962] hub 2-0:1.0: 9 ports detected
[ 1.446870] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.446872] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.447047] hub 3-0:1.0: USB hub found
[ 1.447061] hub 3-0:1.0: 4 ports detected
[ 1.447488] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.447856] ahci 0000:00:1f.2: version 3.0
[ 1.447997] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.458094] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 1.458096] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 1.458497] scsi host0: ahci
[ 1.458590] scsi host1: ahci
[ 1.458660] scsi host2: ahci
[ 1.458728] scsi host3: ahci
[ 1.458767] ata1: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b100 irq 43
[ 1.458768] ata2: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b180 irq 43
[ 1.458769] ata3: DUMMY
[ 1.458769] ata4: DUMMY
[ 1.784709] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.791235] ata1.00: ATA-8: ST750LM022 HN-M750MBB, 2AR20002, max UDMA/133
[ 1.791241] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.797680] ata1.00: configured for UDMA/133
[ 1.798066] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0002 PQ: 0 ANSI: 5
[ 1.802884] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.802889] usb 2-5: new full-speed USB device number 2 using xhci_hcd
[ 1.994129] hub 1-1:1.0: USB hub found
[ 1.994262] hub 1-1:1.0: 8 ports detected
[ 2.112867] usb 2-8: new high-speed USB device number 3 using xhci_hcd
[ 2.222862] tsc: Refined TSC clocksource calibration: 2294.687 MHz
[ 2.222873] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139a22526, max_idle_ns: 440795252169 ns
[ 2.225675] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.227494] ata2.00: ATAPI: MATSHITADVD-RAM UJ8D2Q, 1.10, max UDMA/133
[ 2.229918] ata2.00: configured for UDMA/133
[ 2.233140] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8D2Q 1.10 PQ: 0 ANSI: 5
[ 2.255906] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 2.255909] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.255968] sd 0:0:0:0: [sda] Write Protect is off
[ 2.255971] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.255993] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.285250] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.285252] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.285387] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.311964] sda: sda1 sda2 sda3 sda4
[ 2.312454] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.984163] random: fast init done
[ 3.229689] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 3.232845] clocksource: Switched to clocksource tsc
[ 4.301934] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.311583] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.311902] systemd[1]: Detected architecture x86-64.
[ 4.326276] systemd[1]: Set hostname to <keanu>.
[ 5.826971] systemd[1]: Configuration file /etc/systemd/system/locks.timer is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 5.837122] systemd[1]: Configuration file /etc/systemd/system/locks.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 5.856137] systemd[1]: Listening on Journal Socket.
[ 5.856268] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.856362] systemd[1]: Listening on udev Control Socket.
[ 5.856441] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.856747] systemd[1]: Created slice User and Session Slice.
[ 6.265865] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.265892] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.289874] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 6.546565] vboxguest: loading out-of-tree module taints kernel.
[ 6.548091] vboxguest: PCI device not found, probably running on physical hardware.
[ 6.624119] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.786189] [drm] Initialized
[ 7.952953] vboxguest: PCI device not found, probably running on physical hardware.
[ 8.315821] vboxdrv: Found 4 processor cores
[ 8.342357] vboxdrv: TSC mode is Invariant, tentative frequency 2294681667 Hz
[ 8.342358] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[ 8.403458] VBoxPciLinuxInit
[ 8.891173] vboxpci: IOMMU not found (not registered)
[ 8.944701] VBoxNetAdp: Successfully started.
[ 9.025398] VBoxNetFlt: Successfully started.
[ 9.318679] systemd[1]: Started Create Static Device Nodes in /dev.
[ 9.323677] systemd[1]: Starting udev Kernel Device Manager...
[ 9.325410] systemd[1]: Reached target Local File Systems (Pre).
[ 10.456859] systemd[1]: Started Journal Service.
[ 10.701739] systemd-journald[165]: Received request to flush runtime journal from PID 1
[ 11.668060] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input2
[ 11.668064] ACPI: Lid Switch [LID0]
[ 11.668101] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
[ 11.668103] ACPI: Power Button [PWRB]
[ 11.668131] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4
[ 11.668132] ACPI: Sleep Button [SLPB]
[ 11.668177] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 11.668178] ACPI: Power Button [PWRF]
[ 11.870552] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 11.920098] hidraw: raw HID events driver (C) Jiri Kosina
[ 11.971551] ACPI: AC Adapter [ACAD] (on-line)
[ 12.008184] wmi: Mapper loaded
[ 12.161907] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 12.162036] ACPI: Battery Slot [BAT1] (battery present)
[ 12.222358] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.401249] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 12.401269] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 12.403164] random: crng init done
[ 12.448301] pps_core: LinuxPPS API ver. 1 registered
[ 12.448302] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 12.453497] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 12.453660] PTP clock support registered
[ 12.578263] [drm] Memory usable by graphics device = 2048M
[ 12.578265] checking generic (a0000000 408000) vs hw (a0000000 10000000)
[ 12.578266] fb: switching to inteldrmfb from EFI VGA
[ 12.578286] Console: switching to colour dummy device 80x25
[ 12.578337] [drm] Replacing VGA console driver
[ 12.583758] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 12.583759] [drm] Driver supports precise vblank timestamp query.
[ 12.586007] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 12.596876] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 12.597196] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input8
[ 12.710837] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 12.710839] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 12.710841] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 12.710842] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 12.710842] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 12.710844] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x1b
[ 12.710845] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 12.721265] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[ 12.722031] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 12.722088] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 12.891886] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 12.891889] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 12.891890] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 12.891890] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 12.891891] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 12.893654] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 12.893664] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 13.095847] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 13.095869] acer_wmi: Function bitmap for Communication Button: 0x801
[ 13.098217] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[ 13.098277] input: Acer WMI hotkeys as /devices/virtual/input/input12
[ 13.098645] input: Acer BMA150 accelerometer as /devices/virtual/input/input13
[ 13.192716] fbcon: inteldrmfb (fb0) is primary device
[ 13.196679] iTCO_vendor_support: vendor-support=0
[ 13.207053] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 13.207091] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 13.207197] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.213191] tg3.c:v3.137 (May 11, 2014)
[ 13.299860] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM57786) rev 57766001] (PCI Express) MAC address 20:1a:06:b2:7c:a9
[ 13.299864] tg3 0000:01:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 13.299868] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 13.299871] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 13.385190] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x454f00)
[ 13.412774] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x16, 0x0c.
[ 13.436929] psmouse serio1: elantech: Elan sample query result 03, 64, 75
[ 13.566767] AVX2 version of gcm_enc/dec engaged.
[ 13.566767] AES CTR mode by8 optimization enabled
[ 13.573986] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
[ 13.853344] ath: phy0: WB335 2-ANT card detected
[ 13.853345] ath: phy0: Set BT/WLAN RX diversity capability
[ 13.860005] ath: phy0: Enable LNA combining
[ 13.861093] ath: phy0: ASPM enabled: 0x42
[ 13.861095] ath: EEPROM regdomain: 0x65
[ 13.861095] ath: EEPROM indicates we should expect a direct regpair map
[ 13.861097] ath: Country alpha2 being used: 00
[ 13.861097] ath: Regpair used: 0x65
[ 14.010918] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 14.011270] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90002480000, irq=19
[ 14.618078] Console: switching to colour frame buffer device 170x48
[ 14.636797] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 14.805854] tg3 0000:01:00.0 enp1s0f0: renamed from eth0
[ 14.841864] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 14.848058] mousedev: PS/2 mouse device common for all mice
[ 15.033201] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 15.033296] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 15.033377] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 15.473352] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k FS
[ 16.017185] intel_rapl: Found RAPL domain package
[ 16.017190] intel_rapl: Found RAPL domain core
[ 16.017194] intel_rapl: Found RAPL domain uncore
[ 16.017198] intel_rapl: Found RAPL domain dram
[ 16.017204] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 16.057093] media: Linux media interface: v0.10
[ 16.137267] Bluetooth: Core ver 2.22
[ 16.137282] NET: Registered protocol family 31
[ 16.137283] Bluetooth: HCI device and connection manager initialized
[ 16.137285] Bluetooth: HCI socket layer initialized
[ 16.137287] Bluetooth: L2CAP socket layer initialized
[ 16.137291] Bluetooth: SCO socket layer initialized
[ 16.201151] Linux video capture interface: v2.00
[ 16.351855] usbcore: registered new interface driver btusb
[ 16.685374] usb 2-5: USB disconnect, device number 2
[ 16.685457] usbcore: registered new interface driver ath3k
[ 16.901550] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b3f6)
[ 16.902788] uvcvideo 2-8:1.0: Entity type for entity Extension 4 was not initialized!
[ 16.902790] uvcvideo 2-8:1.0: Entity type for entity Processing 2 was not initialized!
[ 16.902791] uvcvideo 2-8:1.0: Entity type for entity Camera 1 was not initialized!
[ 16.902895] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb2/2-8/2-8:1.0/input/input17
[ 16.902949] usbcore: registered new interface driver uvcvideo
[ 16.902950] USB Video Class driver (1.1.1)
[ 17.071295] usb 2-5: new full-speed USB device number 4 using xhci_hcd
[ 17.095501] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 22.290758] usb 2-5: device descriptor read/64, error -110
[ 27.970219] usb 2-1: new low-speed USB device number 5 using xhci_hcd
[ 28.965167] usbcore: registered new interface driver usbhid
[ 28.965170] usbhid: USB HID core driver
[ 28.966318] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 28.966321] Bluetooth: BNEP filters: protocol multicast
[ 28.966326] Bluetooth: BNEP socket layer initialized
[ 29.255605] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C063.0001/input/input18
[ 29.255732] hid-generic 0003:046D:C063.0001: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:14.0-1/input0
[ 73.798069] fuse init (API version 7.26)
[ 96.894000] Bluetooth: RFCOMM TTY layer initialized
[ 96.894007] Bluetooth: RFCOMM socket layer initialized
[ 96.894013] Bluetooth: RFCOMM ver 1.11
[ 124.978012] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 130.182638] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 131.490198] wlp2s0: authenticate with f4:e3:fb:c5:eb:ce
[ 131.507592] wlp2s0: send auth to f4:e3:fb:c5:eb:ce (try 1/3)
[ 131.509919] wlp2s0: authenticated
[ 131.519534] wlp2s0: associate with f4:e3:fb:c5:eb:ce (try 1/3)
[ 131.524442] wlp2s0: RX AssocResp from f4:e3:fb:c5:eb:ce (capab=0x411 status=0 aid=5)
[ 131.524524] wlp2s0: associated
[ 131.524563] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[ 6793.162054] wlp2s0: authenticate with f4:e3:fb:c5:eb:ce
[ 6793.179429] wlp2s0: send auth to f4:e3:fb:c5:eb:ce (try 1/3)
[ 6793.181885] wlp2s0: authenticated
[ 6793.201393] wlp2s0: associate with f4:e3:fb:c5:eb:ce (try 1/3)
[ 6793.211416] wlp2s0: RX AssocResp from f4:e3:fb:c5:eb:ce (capab=0x411 status=0 aid=1)
[ 6793.211501] wlp2s0: associated
[ 7773.350494] wlp2s0: authenticate with f4:e3:fb:c5:eb:ce
[ 7773.367976] wlp2s0: send auth to f4:e3:fb:c5:eb:ce (try 1/3)
[ 7773.370251] wlp2s0: authenticated
[ 7773.370365] wlp2s0: associating with AP with corrupt probe response
[ 7773.380144] wlp2s0: associate with f4:e3:fb:c5:eb:ce (try 1/3)
[ 7773.388110] wlp2s0: RX AssocResp from f4:e3:fb:c5:eb:ce (capab=0x411 status=0 aid=1)
[ 7773.388190] wlp2s0: associated
[18555.095628] usb 2-1: USB disconnect, device number 5
[26232.274041] wlp2s0: authenticate with f4:e3:fb:c5:eb:ce
[26232.291370] wlp2s0: send auth to f4:e3:fb:c5:eb:ce (try 1/3)
[26232.293771] wlp2s0: authenticated
[26232.303405] wlp2s0: associate with f4:e3:fb:c5:eb:ce (try 1/3)
[26232.313224] wlp2s0: RX AssocResp from f4:e3:fb:c5:eb:ce (capab=0x411 status=0 aid=1)
[26232.313306] wlp2s0: associated
[28392.405572] wlp2s0: AP f4:e3:fb:c5:eb:ce changed bandwidth, new config is 2412 MHz, width 1 (2412/0 MHz)
[38415.774996] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to polling mode: last cmd=0x019f0900
[38416.804883] snd_hda_intel 0000:00:1b.0: No response from codec, disabling MSI: last cmd=0x019f0900
[38417.844667] snd_hda_intel 0000:00:1b.0: azx_get_response timeout, switching to single_cmd mode: last cmd=0x019f0900
[39154.159127] snd_hda_codec_realtek hdaudioC1D0: out of range cmd 0:20:400:4000028
[40334.107184] wlp2s0: authenticate with f4:e3:fb:c5:eb:ce
[40334.124671] wlp2s0: send auth to f4:e3:fb:c5:eb:ce (try 1/3)
[40334.126976] wlp2s0: authenticated
[40334.136812] wlp2s0: associate with f4:e3:fb:c5:eb:ce (try 1/3)
[40334.146693] wlp2s0: RX AssocResp from f4:e3:fb:c5:eb:ce (capab=0x411 status=0 aid=1)
[40334.146806] wlp2s0: associated
[41930.782122] wlp2s0: authenticate with f4:e3:fb:c5:eb:ce
[41930.799553] wlp2s0: send auth to f4:e3:fb:c5:eb:ce (try 1/3)
[41930.802289] wlp2s0: authenticated
[41930.811844] wlp2s0: associate with f4:e3:fb:c5:eb:ce (try 1/3)
[41930.822444] wlp2s0: RX AssocResp from f4:e3:fb:c5:eb:ce (capab=0x411 status=0 aid=1)
[41930.822527] wlp2s0: associated
[51350.314146] snd_hda_codec_realtek hdaudioC1D0: out of range cmd 0:20:400:8000000
[51465.282370] snd_hda_codec_realtek hdaudioC1D0: out of range cmd 0:20:400:4000008
[52497.896388] snd_hda_codec_realtek hdaudioC1D0: out of range cmd 0:20:400:4000008
[54834.959231] wlp2s0: authenticate with f4:e3:fb:c5:eb:ce
[54834.976775] wlp2s0: send auth to f4:e3:fb:c5:eb:ce (try 1/3)
[54834.979052] wlp2s0: authenticated
[54834.988950] wlp2s0: associate with f4:e3:fb:c5:eb:ce (try 1/3)
[54834.998755] wlp2s0: RX AssocResp from f4:e3:fb:c5:eb:ce (capab=0x411 status=0 aid=1)
[54834.998837] wlp2s0: associated
[54840.898383] ata1.00: exception Emask 0x10 SAct 0x1000000 SErr 0x50000 action 0xe frozen
[54840.898389] ata1.00: irq_stat 0x00400000, PHY RDY changed
[54840.898391] ata1: SError: { PHYRdyChg CommWake }
[54840.898395] ata1.00: failed command: WRITE FPDMA QUEUED
[54840.898400] ata1.00: cmd 61/48:c0:00:f0:95/00:00:03:00:00/40 tag 24 ncq dma 36864 out
res 40/00:c4:00:f0:95/00:00:03:00:00/40 Emask 0x10 (ATA bus error)
[54840.898403] ata1.00: status: { DRDY }
[54840.898406] ata1: hard resetting link
[54841.668285] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[54841.681320] ata1.00: configured for UDMA/133
[54841.691473] ata1: EH complete
[58222.928988] usb 2-1: new low-speed USB device number 6 using xhci_hcd
[58223.118865] input: DELL DELL USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb2/2-1/2-1:1.0/0003:046D:C063.0002/input/input19
[58223.118983] hid-generic 0003:046D:C063.0002: input,hidraw0: USB HID v1.10 Mouse [DELL DELL USB Laser Mouse] on usb-0000:00:14.0-1/input0
[60823.639319] TCP: request_sock_TCP: Possible SYN flooding on port 52574. Sending cookies. Check SNMP counters.
And this one with an uptime of 8+ hours:
[ 0.000000] microcode: microcode updated early to revision 0x1f, date = 2016-04-01
[ 0.000000] Linux version 4.9.26-1-lts (builduser@andyrtr) (gcc version 6.3.1 20170306 (GCC) ) #1 SMP Thu May 4 18:46:21 CEST 2017
[ 0.000000] Command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=PARTUUID=04026d87-7c5f-41f9-9fc3-e2cd76f826f3 rw
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] x86/fpu: Using 'eager' FPU context switches.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000094caffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000094cb0000-0x00000000960affff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000960b0000-0x000000009a6befff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000035f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] e820: update [mem 0x93e18018-0x93e28057] usable ==> usable
[ 0.000000] extended physical RAM map:
[ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000006efff] usable
[ 0.000000] reserve setup_data: [mem 0x000000000006f000-0x000000000006ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000070000-0x0000000000087fff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000000088000-0x00000000000bffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000093e18017] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093e18018-0x0000000093e28057] usable
[ 0.000000] reserve setup_data: [mem 0x0000000093e28058-0x0000000094caffff] usable
[ 0.000000] reserve setup_data: [mem 0x0000000094cb0000-0x00000000960affff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000960b0000-0x000000009a6befff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009a6bf000-0x000000009aebefff] reserved
[ 0.000000] reserve setup_data: [mem 0x000000009aebf000-0x000000009afbefff] ACPI NVS
[ 0.000000] reserve setup_data: [mem 0x000000009afbf000-0x000000009affefff] ACPI data
[ 0.000000] reserve setup_data: [mem 0x000000009afff000-0x000000009affffff] usable
[ 0.000000] reserve setup_data: [mem 0x000000009b000000-0x000000009f9fffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000feb00000-0x00000000feb0ffff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fee00fff] reserved
[ 0.000000] reserve setup_data: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000035f5fffff] usable
[ 0.000000] efi: EFI v2.31 by INSYDE Corp.
[ 0.000000] efi: ACPI=0x9affe000 ACPI 2.0=0x9affe014 SMBIOS=0x9aebef98
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: Acer Aspire E1-572/EA50_HW , BIOS V2.12 11/04/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x35f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7F80000000 write-back
[ 0.000000] 1 base 0080000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 009B000000 mask 7FFF000000 uncachable
[ 0.000000] 3 base 009C000000 mask 7FFC000000 uncachable
[ 0.000000] 4 base 00FFC00000 mask 7FFFC00000 write-protect
[ 0.000000] 5 base 0100000000 mask 7F00000000 write-back
[ 0.000000] 6 base 0200000000 mask 7E00000000 write-back
[ 0.000000] 7 base 035F600000 mask 7FFFE00000 uncachable
[ 0.000000] 8 base 035F800000 mask 7FFF800000 uncachable
[ 0.000000] 9 base 0360000000 mask 7FE0000000 uncachable
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0x9b000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000082000] 82000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] BRK [0x01d58000, 0x01d58fff] PGTABLE
[ 0.000000] BRK [0x01d59000, 0x01d59fff] PGTABLE
[ 0.000000] BRK [0x01d5a000, 0x01d5afff] PGTABLE
[ 0.000000] BRK [0x01d5b000, 0x01d5bfff] PGTABLE
[ 0.000000] BRK [0x01d5c000, 0x01d5cfff] PGTABLE
[ 0.000000] BRK [0x01d5d000, 0x01d5dfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x7f95d000-0x7fffffff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000009AFFE014 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x000000009AFFE210 0000A4 (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 0x000000009AFF8000 00010C (v05 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DSDT 0x000000009AFE4000 0102E7 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
[ 0.000000] ACPI: FACS 0x000000009AFB9000 000040
[ 0.000000] ACPI: UEFI 0x000000009AFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: FPDT 0x000000009AFFB000 000044 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MSDM 0x000000009AFFA000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASF! 0x000000009AFF9000 0000A5 (v32 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: HPET 0x000000009AFF7000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: APIC 0x000000009AFF6000 00008C (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: MCFG 0x000000009AFF5000 00003C (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFE1000 002028 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
[ 0.000000] ACPI: BOOT 0x000000009AFDF000 000028 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: ASPT 0x000000009AFDD000 000034 (v07 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: DBGP 0x000000009AFDC000 000034 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDB000 000539 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFDA000 000AD8 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: SSDT 0x000000009AFD6000 003B45 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
[ 0.000000] ACPI: BGRT 0x000000009AFD5000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000035f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x35f5f8000-0x35f5fcfff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000035f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000006efff]
[ 0.000000] node 0: [mem 0x0000000000070000-0x0000000000087fff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x0000000094caffff]
[ 0.000000] node 0: [mem 0x00000000960b0000-0x000000009a6befff]
[ 0.000000] node 0: [mem 0x000000009afff000-0x000000009affffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000035f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000035f5fffff]
[ 0.000000] On node 0 totalpages: 3115078
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3974 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 9739 pages used for memmap
[ 0.000000] DMA32 zone: 623296 pages, LIFO batch:31
[ 0.000000] Normal zone: 38872 pages used for memmap
[ 0.000000] Normal zone: 2487808 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x000000009ba00000-0x000000009f9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0006f000-0x0006ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x00088000-0x000bffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93e18000-0x93e18fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x93e28000-0x93e28fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x94cb0000-0x960affff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9a6bf000-0x9aebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9aebf000-0x9afbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9afbf000-0x9affefff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9b000000-0x9f9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x9fa00000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfe100fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfeafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb00000-0xfeb0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfeb10000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0x9fa00000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 34 pages/cpu @ffff88035f200000 s102232 r8192 d28840 u262144
[ 0.000000] pcpu-alloc: s102232 r8192 d28840 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 3066382
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux-lts.img root=PARTUUID=04026d87-7c5f-41f9-9fc3-e2cd76f826f3 rw
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 12110664K/12460312K available (6153K kernel code, 1075K rwdata, 1944K rodata, 1280K init, 1032K bss, 349648K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:760 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2294.697 MHz processor
[ 0.000024] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.39 BogoMIPS (lpj=22946970)
[ 0.000026] pid_max: default: 32768 minimum: 301
[ 0.000031] ACPI: Core revision 20160831
[ 0.011050] ACPI: 5 ACPI AML tables successfully acquired and loaded
[ 0.023426] Security Framework initialized
[ 0.023427] Yama: becoming mindful.
[ 0.024195] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.027236] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.028587] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028600] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.028855] CPU: Physical Processor ID: 0
[ 0.028855] CPU: Processor Core ID: 0
[ 0.028859] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.028859] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.028863] mce: CPU supports 7 MCE banks
[ 0.028871] CPU0: Thermal monitoring enabled (TM1)
[ 0.028883] process: using mwait in idle threads
[ 0.028886] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
[ 0.028886] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.029205] Freeing SMP alternatives memory: 24K (ffffffff81c4e000 - ffffffff81c54000)
[ 0.040050] ftrace: allocating 24615 entries in 97 pages
[ 0.050879] smpboot: Max logical packages: 4
[ 0.051453] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.151464] TSC deadline timer enabled
[ 0.151466] smpboot: CPU0: Intel(R) Core(TM) i5-4200U CPU @ 1.60GHz (family: 0x6, model: 0x45, stepping: 0x1)
[ 0.151469] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.151500] ... version: 3
[ 0.151500] ... bit width: 48
[ 0.151501] ... generic registers: 4
[ 0.151502] ... value mask: 0000ffffffffffff
[ 0.151502] ... max period: 00007fffffffffff
[ 0.151503] ... fixed-purpose events: 3
[ 0.151503] ... event mask: 000000070000000f
[ 0.152062] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.152135] x86: Booting SMP configuration:
[ 0.152136] .... node #0, CPUs: #1 #2 #3
[ 0.603578] x86: Booted up 1 node, 4 CPUs
[ 0.603580] smpboot: Total of 4 processors activated (18359.09 BogoMIPS)
[ 0.607344] devtmpfs: initialized
[ 0.607403] x86/mm: Memory block size: 128MB
[ 0.609932] PM: Registering ACPI NVS region [mem 0x9aebf000-0x9afbefff] (1048576 bytes)
[ 0.609990] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.610001] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.610046] pinctrl core: initialized pinctrl subsystem
[ 0.610090] RTC time: 3:19:41, date: 05/15/17
[ 0.610169] NET: Registered protocol family 16
[ 0.643595] cpuidle: using governor ladder
[ 0.693609] cpuidle: using governor menu
[ 0.693634] Simple Boot Flag at 0x44 set to 0x1
[ 0.693642] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.693643] ACPI: bus type PCI registered
[ 0.693644] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.693696] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.693697] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.693709] PCI: Using configuration type 1 for base access
[ 0.693741] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.731718] HugeTLB registered 1 GB page size, pre-allocated 0 pages
[ 0.731719] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.731910] ACPI: Added _OSI(Module Device)
[ 0.731911] ACPI: Added _OSI(Processor Device)
[ 0.731912] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.731912] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.732121] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.736950] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.737804] ACPI: Dynamic OEM Table Load:
[ 0.737811] ACPI: SSDT 0xFFFF880352897400 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120913)
[ 0.738125] ACPI: Dynamic OEM Table Load:
[ 0.738132] ACPI: SSDT 0xFFFF8803508A2000 0005AA (v01 PmRef ApIst 00003000 INTL 20120913)
[ 0.738483] ACPI: Dynamic OEM Table Load:
[ 0.738487] ACPI: SSDT 0xFFFF88035092EC00 000119 (v01 PmRef ApCst 00003000 INTL 20120913)
[ 0.739325] ACPI : EC: EC started
[ 0.739325] ACPI : EC: interrupt blocked
[ 0.853670] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.853672] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x22, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.853673] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.853674] ACPI: Interpreter enabled
[ 0.853703] ACPI: (supports S0 S3 S4 S5)
[ 0.853704] ACPI: Using IOAPIC for interrupt routing
[ 0.853728] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.924964] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.924968] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.925260] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.925261] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[ 0.925706] PCI host bridge to bus 0000:00
[ 0.925708] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.925710] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.925711] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.925712] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[ 0.925713] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[ 0.925713] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[ 0.925714] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[ 0.925715] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.925716] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.925717] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.925718] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.925719] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[ 0.925720] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[ 0.925721] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[ 0.925722] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[ 0.925723] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[ 0.925724] pci_bus 0000:00: root bus resource [mem 0x9fa00000-0xfeafffff window]
[ 0.925725] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.925732] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
[ 0.925899] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
[ 0.925909] pci 0000:00:02.0: reg 0x10: [mem 0xb0000000-0xb03fffff 64bit]
[ 0.925915] pci 0000:00:02.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[ 0.925919] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.926074] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
[ 0.926082] pci 0000:00:03.0: reg 0x10: [mem 0xb0610000-0xb0613fff 64bit]
[ 0.926259] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
[ 0.926273] pci 0000:00:14.0: reg 0x10: [mem 0xb0600000-0xb060ffff 64bit]
[ 0.926326] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.926437] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.926472] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
[ 0.926489] pci 0000:00:16.0: reg 0x10: [mem 0xb0618000-0xb061801f 64bit]
[ 0.926552] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.926700] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
[ 0.926714] pci 0000:00:1b.0: reg 0x10: [mem 0xb0614000-0xb0617fff 64bit]
[ 0.926773] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.926885] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.926920] pci 0000:00:1c.0: [8086:9c14] type 01 class 0x060400
[ 0.926978] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.927126] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.927162] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
[ 0.927219] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.927372] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
[ 0.929838] pci 0000:00:1d.0: reg 0x10: [mem 0xb061c000-0xb061c3ff]
[ 0.930767] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.930891] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.930928] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
[ 0.931168] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
[ 0.931179] pci 0000:00:1f.2: reg 0x10: [io 0x3088-0x308f]
[ 0.931185] pci 0000:00:1f.2: reg 0x14: [io 0x3094-0x3097]
[ 0.931191] pci 0000:00:1f.2: reg 0x18: [io 0x3080-0x3087]
[ 0.931197] pci 0000:00:1f.2: reg 0x1c: [io 0x3090-0x3093]
[ 0.931202] pci 0000:00:1f.2: reg 0x20: [io 0x3060-0x307f]
[ 0.931209] pci 0000:00:1f.2: reg 0x24: [mem 0xb061b000-0xb061b7ff]
[ 0.931239] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.931376] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
[ 0.931389] pci 0000:00:1f.3: reg 0x10: [mem 0xb0619000-0xb06190ff 64bit]
[ 0.931406] pci 0000:00:1f.3: reg 0x20: [io 0x3040-0x305f]
[ 0.931648] pci 0000:01:00.0: [14e4:16b3] type 00 class 0x020000
[ 0.931674] pci 0000:01:00.0: reg 0x10: [mem 0xb0410000-0xb041ffff 64bit pref]
[ 0.931692] pci 0000:01:00.0: reg 0x18: [mem 0xb0420000-0xb042ffff 64bit pref]
[ 0.931725] pci 0000:01:00.0: reg 0x30: [mem 0xfffff800-0xffffffff pref]
[ 0.931821] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
[ 0.931867] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.931936] pci 0000:01:00.1: [14e4:16bc] type 00 class 0x080501
[ 0.931962] pci 0000:01:00.1: reg 0x10: [mem 0xb0400000-0xb040ffff 64bit pref]
[ 0.932087] pci 0000:01:00.1: PME# supported from D0 D3hot D3cold
[ 0.963728] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.963735] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 0.963785] pci 0000:02:00.0: [168c:0036] type 00 class 0x028000
[ 0.963808] pci 0000:02:00.0: reg 0x10: [mem 0xb0500000-0xb057ffff 64bit]
[ 0.963858] pci 0000:02:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.963922] pci 0000:02:00.0: supports D1 D2
[ 0.963923] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.993697] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 0.993702] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 1.014226] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.014271] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.014312] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.014352] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.014393] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.014433] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.014473] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.014513] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 1.014689] ACPI: Enabled 5 GPEs in block 00 to 7F
[ 1.014731] ACPI : EC: interrupt unblocked
[ 1.014738] ACPI : EC: event unblocked
[ 1.014744] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x22, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 1.014746] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 1.014900] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 1.014901] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.014903] vgaarb: loaded
[ 1.014904] vgaarb: bridge control possible 0000:00:02.0
[ 1.014960] Registered efivars operations
[ 1.056475] PCI: Using ACPI for IRQ routing
[ 1.061665] PCI: pci_cache_line_size set to 64 bytes
[ 1.061763] e820: reserve RAM buffer [mem 0x0006f000-0x0006ffff]
[ 1.061764] e820: reserve RAM buffer [mem 0x00088000-0x0008ffff]
[ 1.061764] e820: reserve RAM buffer [mem 0x93e18018-0x93ffffff]
[ 1.061765] e820: reserve RAM buffer [mem 0x94cb0000-0x97ffffff]
[ 1.061766] e820: reserve RAM buffer [mem 0x9a6bf000-0x9bffffff]
[ 1.061767] e820: reserve RAM buffer [mem 0x9b000000-0x9bffffff]
[ 1.061768] e820: reserve RAM buffer [mem 0x35f600000-0x35fffffff]
[ 1.061857] NetLabel: Initializing
[ 1.061858] NetLabel: domain hash size = 128
[ 1.061858] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.061869] NetLabel: unlabeled traffic allowed by default
[ 1.061911] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.061915] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.063936] clocksource: Switched to clocksource hpet
[ 1.068921] VFS: Disk quotas dquot_6.6.0
[ 1.068936] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.069005] pnp: PnP ACPI init
[ 1.069146] system 00:00: [io 0x0680-0x069f] has been reserved
[ 1.069147] system 00:00: [io 0xfd60-0xfd63] has been reserved
[ 1.069149] system 00:00: [io 0xffff] has been reserved
[ 1.069150] system 00:00: [io 0xffff] has been reserved
[ 1.069151] system 00:00: [io 0xffff] has been reserved
[ 1.069152] system 00:00: [io 0x1800-0x18fe] has been reserved
[ 1.069153] system 00:00: [io 0x164e-0x164f] has been reserved
[ 1.069156] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.069197] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.069240] system 00:02: [io 0x1854-0x1857] has been reserved
[ 1.069242] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.069267] pnp 00:03: Plug and Play ACPI device, IDs MSF0001 PNP0303 (active)
[ 1.069372] pnp 00:04: Plug and Play ACPI device, IDs ETD0500 PNP0f13 (active)
[ 1.084076] pnp 00:05: disabling [mem 0xffffffff-0x10000fffe] because it overlaps 0000:01:00.0 BAR 6 [mem 0xfffff800-0xffffffff pref]
[ 1.084079] pnp 00:05: disabling [mem 0xffffffff-0x10000fffe disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0xffff0000-0xffffffff pref]
[ 1.084100] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.084101] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.084103] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.084104] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.084105] system 00:05: [mem 0xe0000000-0xefffffff] has been reserved
[ 1.084106] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.084107] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.084108] system 00:05: [mem 0xff000000-0xff000fff] has been reserved
[ 1.084110] system 00:05: [mem 0xff010000-0xffffffff] could not be reserved
[ 1.084111] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.084112] system 00:05: [mem 0x9fa20000-0x9fa20fff] has been reserved
[ 1.084114] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.084362] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.084771] pnp: PnP ACPI: found 7 devices
[ 1.090671] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 1.090675] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfffff800-0xffffffff pref]: no compatible bridge window
[ 1.090677] pci 0000:02:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 1.090698] pci 0000:00:1c.0: BAR 14: assigned [mem 0x9fb00000-0x9fbfffff]
[ 1.090701] pci 0000:01:00.0: BAR 6: assigned [mem 0x9fb00000-0x9fb007ff pref]
[ 1.090703] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 1.090707] pci 0000:00:1c.0: bridge window [mem 0x9fb00000-0x9fbfffff]
[ 1.090710] pci 0000:00:1c.0: bridge window [mem 0xb0400000-0xb04fffff 64bit pref]
[ 1.090715] pci 0000:02:00.0: BAR 6: assigned [mem 0xb0580000-0xb058ffff pref]
[ 1.090716] pci 0000:00:1c.3: PCI bridge to [bus 02]
[ 1.090719] pci 0000:00:1c.3: bridge window [mem 0xb0500000-0xb05fffff]
[ 1.090726] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 1.090727] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 1.090728] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 1.090729] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[ 1.090730] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[ 1.090731] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[ 1.090732] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[ 1.090733] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[ 1.090734] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[ 1.090735] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[ 1.090736] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[ 1.090737] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[ 1.090738] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[ 1.090739] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[ 1.090740] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[ 1.090741] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[ 1.090742] pci_bus 0000:00: resource 20 [mem 0x9fa00000-0xfeafffff window]
[ 1.090743] pci_bus 0000:01: resource 1 [mem 0x9fb00000-0x9fbfffff]
[ 1.090744] pci_bus 0000:01: resource 2 [mem 0xb0400000-0xb04fffff 64bit pref]
[ 1.090746] pci_bus 0000:02: resource 1 [mem 0xb0500000-0xb05fffff]
[ 1.090856] NET: Registered protocol family 2
[ 1.091019] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.091196] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.091309] TCP: Hash tables configured (established 131072 bind 65536)
[ 1.091335] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.091376] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 1.091442] NET: Registered protocol family 1
[ 1.091455] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 1.114084] PCI: CLS 64 bytes, default 64
[ 1.114121] Unpacking initramfs...
[ 1.209834] Freeing initrd memory: 6796K (ffff88007f95d000 - ffff880080000000)
[ 1.209836] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.209838] software IO TLB [mem 0x8f0c0000-0x930c0000] (64MB) mapped at [ffff88008f0c0000-ffff8800930bffff]
[ 1.210007] Scanning for low memory corruption every 60 seconds
[ 1.210576] Initialise system trusted keyrings
[ 1.210655] workingset: timestamp_bits=40 max_order=22 bucket_order=0
[ 1.211954] zbud: loaded
[ 1.212298] Key type asymmetric registered
[ 1.212325] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 1.212348] io scheduler noop registered
[ 1.212349] io scheduler deadline registered (default)
[ 1.212355] io scheduler cfq registered
[ 1.212735] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 1.212736] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 1.212737] pci 0000:01:00.1: Signaling PME through PCIe PME interrupt
[ 1.212740] pcie_pme 0000:00:1c.0:pcie001: service driver pcie_pme loaded
[ 1.212752] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 1.212754] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 1.212756] pcie_pme 0000:00:1c.3:pcie001: service driver pcie_pme loaded
[ 1.212762] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.212766] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.212776] efifb: probing for efifb
[ 1.212786] efifb: framebuffer at 0xa0000000, using 4128k, total 4128k
[ 1.212786] efifb: mode is 1366x768x32, linelength=5504, pages=1
[ 1.212787] efifb: scrolling: redraw
[ 1.212788] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.215041] Console: switching to colour frame buffer device 170x48
[ 1.217136] fb0: EFI VGA frame buffer device
[ 1.217142] intel_idle: MWAIT substates: 0x11142120
[ 1.217143] intel_idle: v0.4.1 model 0x45
[ 1.217317] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.217487] GHES: HEST is not enabled!
[ 1.217545] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.217906] Linux agpgart interface v0.103
[ 1.218166] rtc_cmos 00:01: RTC can wake from S4
[ 1.218284] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 1.218309] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.218319] intel_pstate: Intel P-state driver initializing
[ 1.218546] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.219044] NET: Registered protocol family 10
[ 1.219548] NET: Registered protocol family 17
[ 1.219980] microcode: sig=0x40651, pf=0x40, revision=0x1f
[ 1.220156] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 1.220567] registered taskstats version 1
[ 1.220581] Loading compiled-in X.509 certificates
[ 1.220611] zswap: loaded using pool lzo/zbud
[ 1.221279] Magic number: 1:706:310
[ 1.221304] tty tty39: hash matches
[ 1.221448] rtc_cmos 00:01: setting system clock to 2017-05-15 03:19:42 UTC (1494818382)
[ 1.221593] PM: Hibernation image not present or could not be loaded.
[ 1.224265] Freeing unused kernel memory: 1280K (ffffffff81b0e000 - ffffffff81c4e000)
[ 1.224268] Write protecting the kernel read-only data: 10240k
[ 1.225390] Freeing unused kernel memory: 2024K (ffff880001606000 - ffff880001800000)
[ 1.226171] Freeing unused kernel memory: 104K (ffff8800019e6000 - ffff880001a00000)
[ 1.336744] random: systemd-tmpfile: uninitialized urandom read (16 bytes read)
[ 1.338098] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.338138] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.338829] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.338843] random: udevadm: uninitialized urandom read (16 bytes read)
[ 1.340845] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.340859] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.340863] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.341022] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.341034] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[ 1.368491] sdhci: Secure Digital Host Controller Interface driver
[ 1.368492] sdhci: Copyright(c) Pierre Ossman
[ 1.369381] i8042: PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
[ 1.386249] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.386255] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.386766] sdhci-pci 0000:01:00.1: SDHCI controller found [14e4:16bc] (rev 1)
[ 1.388173] mmc0: SDHCI controller on PCI [0000:01:00.1] using ADMA 64-bit
[ 1.388277] ACPI: bus type USB registered
[ 1.388310] usbcore: registered new interface driver usbfs
[ 1.388324] usbcore: registered new interface driver hub
[ 1.388348] usbcore: registered new device driver usb
[ 1.388440] SCSI subsystem initialized
[ 1.389645] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.389652] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.390307] libata version 3.00 loaded.
[ 1.390725] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[ 1.390731] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.391007] hub 1-0:1.0: USB hub found
[ 1.391020] hub 1-0:1.0: 9 ports detected
[ 1.393427] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.393577] ehci-pci: EHCI PCI platform driver
[ 1.393876] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.393879] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.394085] hub 2-0:1.0: USB hub found
[ 1.394094] hub 2-0:1.0: 4 ports detected
[ 1.395057] ahci 0000:00:1f.2: version 3.0
[ 1.395204] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 1.405324] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x3 impl SATA mode
[ 1.405327] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo only pio slum part deso sadm sds apst
[ 1.406078] scsi host0: ahci
[ 1.406169] scsi host1: ahci
[ 1.406235] scsi host2: ahci
[ 1.406355] scsi host3: ahci
[ 1.406396] ata1: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b100 irq 43
[ 1.406397] ata2: SATA max UDMA/133 abar m2048@0xb061b000 port 0xb061b180 irq 43
[ 1.406398] ata3: DUMMY
[ 1.406398] ata4: DUMMY
[ 1.406557] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.406561] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[ 1.406571] ehci-pci 0000:00:1d.0: debug port 2
[ 1.410461] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.410470] ehci-pci 0000:00:1d.0: irq 23, io mem 0xb061c000
[ 1.423074] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.435238] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.435866] hub 3-0:1.0: USB hub found
[ 1.435882] hub 3-0:1.0: 2 ports detected
[ 1.736877] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.743658] ata1.00: ATA-8: ST750LM022 HN-M750MBB, 2AR20002, max UDMA/133
[ 1.743663] ata1.00: 1465149168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.744022] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[ 1.750607] ata1.00: configured for UDMA/133
[ 1.750873] scsi 0:0:0:0: Direct-Access ATA ST750LM022 HN-M7 0002 PQ: 0 ANSI: 5
[ 1.794026] usb 3-1: new high-speed USB device number 2 using ehci-pci
[ 1.985293] hub 3-1:1.0: USB hub found
[ 1.985404] hub 3-1:1.0: 8 ports detected
[ 2.054025] usb 1-8: new high-speed USB device number 3 using xhci_hcd
[ 2.196675] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.198606] ata2.00: ATAPI: MATSHITADVD-RAM UJ8D2Q, 1.10, max UDMA/133
[ 2.200999] ata2.00: configured for UDMA/133
[ 2.204169] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8D2Q 1.10 PQ: 0 ANSI: 5
[ 2.224064] tsc: Refined TSC clocksource calibration: 2294.687 MHz
[ 2.224085] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139a22526, max_idle_ns: 440795252169 ns
[ 2.228903] sd 0:0:0:0: [sda] 1465149168 512-byte logical blocks: (750 GB/699 GiB)
[ 2.228908] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.229055] sd 0:0:0:0: [sda] Write Protect is off
[ 2.229061] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.229116] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.246536] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.246539] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.246748] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.278857] sda: sda1 sda2 sda3 sda4
[ 2.279477] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.745348] random: fast init done
[ 3.234346] clocksource: Switched to clocksource tsc
[ 3.307484] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 4.402038] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 4.409657] systemd[1]: systemd 232 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[ 4.409777] systemd[1]: Detected architecture x86-64.
[ 4.426330] systemd[1]: Set hostname to <keanu>.
[ 5.982816] systemd[1]: Configuration file /etc/systemd/system/locks.timer is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 5.992818] systemd[1]: Configuration file /etc/systemd/system/locks.service is marked executable. Please remove executable permission bits. Proceeding anyway.
[ 6.012020] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 6.012190] systemd[1]: Listening on udev Control Socket.
[ 6.012580] systemd[1]: Created slice System Slice.
[ 6.012770] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 6.012953] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 6.386511] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[ 6.573284] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.573367] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 6.857700] vboxguest: loading out-of-tree module taints kernel.
[ 6.860252] vboxguest: PCI device not found, probably running on physical hardware.
[ 6.955641] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.476538] [drm] Initialized
[ 7.630940] vboxguest: PCI device not found, probably running on physical hardware.
[ 7.715017] systemd-journald[160]: Received request to flush runtime journal from PID 1
[ 8.260964] vboxdrv: Found 4 processor cores
[ 8.284223] vboxdrv: TSC mode is Invariant, tentative frequency 2294674849 Hz
[ 8.284225] vboxdrv: Successfully loaded version 5.1.22 (interface 0x00280000)
[ 8.337414] VBoxPciLinuxInit
[ 8.504140] vboxpci: IOMMU not found (not registered)
[ 8.523919] VBoxNetAdp: Successfully started.
[ 8.571193] VBoxNetFlt: Successfully started.
[ 9.635342] wmi: Mapper loaded
[ 9.914958] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0D:00/input/input2
[ 9.914963] ACPI: Lid Switch [LID0]
[ 9.914972] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.915026] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input3
[ 9.915029] ACPI: Power Button [PWRB]
[ 9.915071] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0E:00/input/input4
[ 9.915073] ACPI: Sleep Button [SLPB]
[ 9.915120] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[ 9.915122] ACPI: Power Button [PWRF]
[ 9.918823] FUJITSU Extended Socket Network Device Driver - version 1.1 - Copyright (c) 2015 FUJITSU LIMITED
[ 9.935848] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[ 9.935872] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 10.069069] hidraw: raw HID events driver (C) Jiri Kosina
[ 10.069288] ACPI: AC Adapter [ACAD] (on-line)
[ 10.172605] [drm] Memory usable by graphics device = 2048M
[ 10.172608] checking generic (a0000000 408000) vs hw (a0000000 10000000)
[ 10.172609] fb: switching to inteldrmfb from EFI VGA
[ 10.172637] Console: switching to colour dummy device 80x25
[ 10.173096] [drm] Replacing VGA console driver
[ 10.179445] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.179446] [drm] Driver supports precise vblank timestamp query.
[ 10.181701] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 10.194201] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 10.194592] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 10.194627] [drm] Initialized i915 1.6.0 20160919 for 0000:00:02.0 on minor 0
[ 10.294238] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 10.297293] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC282: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.297296] snd_hda_codec_realtek hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 10.297298] snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 10.297300] snd_hda_codec_realtek hdaudioC1D0: mono: mono_out=0x0
[ 10.297301] snd_hda_codec_realtek hdaudioC1D0: inputs:
[ 10.297303] snd_hda_codec_realtek hdaudioC1D0: Internal Mic=0x1b
[ 10.297305] snd_hda_codec_realtek hdaudioC1D0: Mic=0x19
[ 10.353966] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 10.354025] ACPI: Battery Slot [BAT1] (battery present)
[ 10.516011] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 10.516013] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 10.516014] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 10.516015] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 10.516015] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 10.530640] pps_core: LinuxPPS API ver. 1 registered
[ 10.530641] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 10.547712] PTP clock support registered
[ 10.557485] random: crng init done
[ 10.558583] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[ 10.558788] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 10.558835] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 10.606949] tg3.c:v3.137 (May 11, 2014)
[ 10.741791] tg3 0000:01:00.0 eth0: Tigon3 [partno(BCM57786) rev 57766001] (PCI Express) MAC address 20:1a:06:b2:7c:a9
[ 10.741794] tg3 0000:01:00.0 eth0: attached PHY is 57765 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[ 10.741797] tg3 0000:01:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
[ 10.741799] tg3 0000:01:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[ 10.829354] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 10.829368] fbcon: inteldrmfb (fb0) is primary device
[ 10.884786] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
[ 10.884858] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
[ 10.884925] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 10.922383] acer_wmi: Acer Laptop ACPI-WMI Extras
[ 10.922405] acer_wmi: Function bitmap for Communication Button: 0x801
[ 10.938031] acer_wmi: Enabling Launch Manager failed: 0xe2 - 0x0
[ 10.938106] input: Acer WMI hotkeys as /devices/virtual/input/input15
[ 10.938554] input: Acer BMA150 accelerometer as /devices/virtual/input/input16
[ 10.990025] iTCO_vendor_support: vendor-support=0
[ 10.998114] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.998146] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 10.998233] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 11.028838] AVX2 version of gcm_enc/dec engaged.
[ 11.028839] AES CTR mode by8 optimization enabled
[ 11.310282] psmouse serio1: elantech: assuming hardware version 3 (with firmware version 0x454f00)
[ 11.343992] psmouse serio1: elantech: Synaptics capabilities query result 0x79, 0x16, 0x0c.
[ 11.371700] psmouse serio1: elantech: Elan sample query result 03, 64, 75
[ 11.501970] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input9
[ 11.601684] ath: phy0: WB335 2-ANT card detected
[ 11.601685] ath: phy0: Set BT/WLAN RX diversity capability
[ 11.608350] ath: phy0: Enable LNA combining
[ 11.609438] ath: phy0: ASPM enabled: 0x42
[ 11.609439] ath: EEPROM regdomain: 0x65
[ 11.609440] ath: EEPROM indicates we should expect a direct regpair map
[ 11.609441] ath: Country alpha2 being used: 00
[ 11.609441] ath: Regpair used: 0x65
[ 11.626830] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 11.627109] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0xffffc90002480000, irq=19
[ 12.264154] intel_rapl: Found RAPL domain package
[ 12.264156] intel_rapl: Found RAPL domain core
[ 12.264159] intel_rapl: Found RAPL domain uncore
[ 12.264161] intel_rapl: Found RAPL domain dram
[ 12.264165] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 12.286929] tg3 0000:01:00.0 enp1s0f0: renamed from eth0
[ 12.289487] Console: switching to colour frame buffer device 170x48
[ 12.307392] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 12.408628] mousedev: PS/2 mouse device common for all mice
[ 12.488058] ath9k 0000:02:00.0 wlp2s0: renamed from wlan0
[ 13.146033] Adding 4194300k swap on /dev/sda3. Priority:-1 extents:1 across:4194300k FS
[ 13.722853] Bluetooth: Core ver 2.22
[ 13.722873] NET: Registered protocol family 31
[ 13.722874] Bluetooth: HCI device and connection manager initialized
[ 13.722877] Bluetooth: HCI socket layer initialized
[ 13.722879] Bluetooth: L2CAP socket layer initialized
[ 13.722889] Bluetooth: SCO socket layer initialized
[ 13.728511] media: Linux media interface: v0.10
[ 13.833999] Linux video capture interface: v2.00
[ 13.994396] usbcore: registered new interface driver btusb
[ 14.235283] usbcore: registered new interface driver ath3k
[ 14.274253] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b3f6)
[ 14.274266] usb 1-5: USB disconnect, device number 2
[ 14.275513] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[ 14.275520] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[ 14.275524] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[ 14.275743] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input17
[ 14.275881] usbcore: registered new interface driver uvcvideo
[ 14.275882] USB Video Class driver (1.1.1)
[ 14.614006] usb 1-5: new full-speed USB device number 4 using xhci_hcd
[ 14.713761] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: data=ordered
[ 19.803943] usb 1-5: device descriptor read/64, error -110
[ 26.927834] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.927837] Bluetooth: BNEP filters: protocol multicast
[ 26.927841] Bluetooth: BNEP socket layer initialized
[ 89.483579] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[ 89.654337] hub 1-1:1.0: USB hub found
[ 89.654360] hub 1-1:1.0: 4 ports detected
[ 89.973570] usb 1-1.1: new low-speed USB device number 6 using xhci_hcd
[ 90.213569] usb 1-1.2: new low-speed USB device number 7 using xhci_hcd
[ 90.867793] usbcore: registered new interface driver usbhid
[ 90.867795] usbhid: USB HID core driver
[ 90.887725] input: A4Tech USB Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:09DA:C10A.0001/input/input18
[ 90.888006] hid-generic 0003:09DA:C10A.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [A4Tech USB Mouse] on usb-0000:00:14.0-1.1/input0
[ 90.888272] input: Dell Dell USB Entry Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:413C:2107.0002/input/input19
[ 90.964071] hid-generic 0003:413C:2107.0002: input,hidraw1: USB HID v1.10 Keyboard [Dell Dell USB Entry Keyboard] on usb-0000:00:14.0-1.2/input0
[ 106.355306] fuse init (API version 7.26)
[ 129.676184] Bluetooth: RFCOMM TTY layer initialized
[ 129.676190] Bluetooth: RFCOMM socket layer initialized
[ 129.676196] Bluetooth: RFCOMM ver 1.11
[ 173.710407] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 182.089990] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 183.343617] wlp2s0: authenticate with d0:3e:5c:3e:f8:84
[ 183.361135] wlp2s0: send auth to d0:3e:5c:3e:f8:84 (try 1/3)
[ 183.363687] wlp2s0: authenticated
[ 183.383195] wlp2s0: associate with d0:3e:5c:3e:f8:84 (try 1/3)
[ 183.386915] wlp2s0: RX AssocResp from d0:3e:5c:3e:f8:84 (capab=0x411 status=0 aid=3)
[ 183.387018] wlp2s0: associated
[ 183.387052] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[31484.202411] SUPR0GipMap: fGetGipCpu=0xb
[31485.359496] vboxdrv: ffffffffa0b97020 VMMR0.r0
[31486.005056] vboxdrv: ffffffffa0cad020 VBoxDDR0.r0
[31486.090751] VBoxNetFlt: attached to 'wlp2s0' / 40:f0:2f:1e:04:60
[31486.131373] vboxdrv: ffffffffa0031020 VBoxEhciR0.r0
Offline
[54840.898391] ata1: SError: { PHYRdyChg CommWake }
https://ata.wiki.kernel.org/index.php/L … _expansion
Typically a bad power or sata cable - but that's less likely on a notebook, resp. finding the connection weakness could turn out to be a problem.
Check "cat /proc/scsi/scsi" to figure which device ata1 is (scsi0, the counting is off by one because otherwise it would be too easy ;-)
If you're "lucky" it's some DvD drive with a broken disk inside, but given your perceptions, it's likely your hard disk :-(
Offline
Thank you seth. I guess I better start looking for new hard disks :-|
The output of 'cat /proc/scsi/scsi' is:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: ATA Model: ST750LM022 HN-M7 Rev: 0002
Type: Direct-Access ANSI SCSI revision: 05
Host: scsi1 Channel: 00 Id: 00 Lun: 00
Vendor: MATSHITA Model: DVD-RAM UJ8D2Q Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 05
Last edited by arslanone (2017-05-15 13:13:05)
Offline
It's the hard disk.
This *can* just indicate a S3 resume (and then it's harmless), but also *can* indicate a wonky disk connection and then you get I/O errors (notably since the disk could remain unconnected for a random amount of time)
If those error messages pop up more often and notably in correlation with the hangs/freezes (ie. no freeze without but after such messages) you should seek to fix that.
This unfortunately means to open the notebook and inspect the connections - don't do that on your own if you haven't before and/or check whether there're youtube videos about eg. replacing the disk in that notebook model, so you've seen what expects you before and how you access internals w/o breaking latches or such ... :-/
Maybe check the behavior with the mainline kernel (not lts) first (that's far less troublesome and hey, maybe there's just a bug in the ext4 kernel module...)
Offline
Thank you Seth, really appreciate it.
I'll keep an eye on the freezes and check logs to make sure, and switch to non-lts kernel. Let's see.
Offline