Arch Linux

keol

Member

Registered: 2014-10-23

Posts: 3

[Solved]PPPOE works but route is wrong

No internet When the PC boot,and PPPOE working.

I changed default dev br0 to ppp0 ,then it will works well. but how can I keep the change?
```
$ ip route
default via 10.0.0.1 dev br0
10.0.0.0/24 dev br0 proto kernel scope link src 10.0.0.1
10.126.128.1 dev ppp0 proto kernel scope link src 183.149.63.155
172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1

$ sudo ip route change default dev ppp0
[sudo] password for k:

$ ping baidu.com
PING baidu.com (111.13.101.208) 56(84) bytes of data.
64 bytes from 111.13.101.208 (111.13.101.208): icmp_seq=1 ttl=52 time=44.9 ms
64 bytes from 111.13.101.208 (111.13.101.208): icmp_seq=2 ttl=52 time=44.9 ms

$ ip route
default dev ppp0 scope link
10.0.0.0/24 dev br0 proto kernel scope link src 10.0.0.1
10.126.128.1 dev ppp0 proto kernel scope link src 183.149.63.155
172.17.0.0/16 dev docker0 proto kernel scope link src 172.17.0.1
```

[Solved]
cat /etc/netctl/bridge
Description="Example Bridge connection"
Interface=br0
Connection=bridge
BindsToInterfaces=(enp4s0f0 enp4s0f1 enp4s0f2 enp4s0f3)

## IPv4
IP=static
Address='10.0.0.1/24'
#Gateway='10.0.0.1'     <---------------------------------Commented out that!

## For IPv6 autoconfiguration
#IP6=stateless

## For IPv6 static address configuration
IP6=static
Address6=('1234:5678:9abc:def::1/64')
#Routes6=('abcd::1234')
#Gateway6='1234:0:123::abcd'

## Ignore (R)STP and immediately activate the bridge
SkipForwardingDelay=yes
SkipNoCarier=yes

Last edited by keol (2017-06-20 14:34:34)