You are not logged in.

Pages: 1

#1 2017-06-30 05:11:13

saw_mj
Member
Registered: 2017-06-12
Posts: 49

Xorg configuration issues

ok guys, since the beginning i used Arch Linux I got issues and lots of error specially when it comes to xorg

I have these graphic cards

Intel Corporation HD Graphics 530 and NVIDIA Corporation GM107M [GeForce GTX 960M]

and i installed these pachages

xorg , xorg-server and xorg-apps
Bumblebee
mesa, xf86-video-intel, nvidia and nvidia utils

and everything seems ok so far except i have some screen tearing while i scroll down or watching videos

Then I tried to follow the wiki page and editing the config files to solve the tearing issue

so i created a dot file for intel 20-intel.conf cause there was no conf files in .d directory

and when i try to restart my machine

the Xorg fails

to make it short if i touched anything related to xorg configuration files .. Xorg fails

Xorg :1 -configure
Nvidia-xconfig
manually editing dots file ... etcs it makes Xorg fails



and when i use nvidia-settings it gives me this :

You do not appear to be using the Nvidia X driver. Please edit your X configuration file.




----------------

and i have another noopie question

how can i know which graphic card i'm currently using ?
and how can i test if intel graphical card working proberly ?



--------- Thank you in advance!

Offline

#2 2017-06-30 06:40:58

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,881

Re: Xorg configuration issues

https://wiki.archlinux.org/index.php/NVIDIA_Optimus
https://wiki.archlinux.org/index.php/Bumblebee

edit: post "lspci" output (the check the actual setup, whether there are two VGA devices or on is just a 3D controller) and check your xorg log to know which driver is in use.

Last edited by seth (2017-06-30 06:42:34)

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2017-06-30 07:06:52

saw_mj
Member
Registered: 2017-06-12
Posts: 49

Re: Xorg configuration issues

00:00.0 Host bridge: Intel Corporation Skylake Host Bridge/DRAM Registers (rev 07)
00:01.0 PCI bridge: Intel Corporation Skylake PCIe Controller (x16) (rev 07)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
00:16.0 Communication controller: Intel Corporation Sunrise Point-H CSME HECI #1 (rev 31)
00:17.0 SATA controller: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] (rev 31)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #2 (rev f1)
00:1c.2 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #3 (rev f1)
00:1c.3 PCI bridge: Intel Corporation Sunrise Point-H PCI Express Root Port #4 (rev f1)
00:1f.0 ISA bridge: Intel Corporation Sunrise Point-H LPC Controller (rev 31)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-H PMC (rev 31)
00:1f.3 Audio device: Intel Corporation Sunrise Point-H HD Audio (rev 31)
00:1f.4 SMBus: Intel Corporation Sunrise Point-H SMBus (rev 31)
01:00.0 3D controller: NVIDIA Corporation GM107M [GeForce GTX 960M] (rev a2)
07:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)
08:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99)
09:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)



I read those two wiki pages and nothing helped me

Offline

#4 2017-06-30 07:09:18

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,881

Re: Xorg configuration issues

It's a hybrid setup, so the optimus/bumblebee approach is correct. Sorry, I would not know how to help you if you can actually not find any help in the relevant wiki articles. Maybe try more than 25 minutes (at best) to understand them?

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2017-06-30 07:36:45

saw_mj
Member
Registered: 2017-06-12
Posts: 49

Re: Xorg configuration issues

[    31.985] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[    31.985] X Protocol Version 11, Revision 0
[    31.985] Build Operating System: Linux 4.9.11-1-ARCH x86_64 
[    31.985] Current Operating System: Linux Arch 4.11.6-1-ARCH #1 SMP PREEMPT Sat Jun 17 08:19:42 CEST 2017 x86_64
[    31.985] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ae70fac3-0ce2-4942-aba2-f5ca3a5377eb rw quiet
[    31.985] Build Date: 07 April 2017  05:42:48PM
[    31.985]  
[    31.985] Current version of pixman: 0.34.0
[    31.985] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    31.985] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    31.986] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jun 30 11:29:04 2017
[    31.987] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    31.988] (==) No Layout section.  Using the first Screen section.
[    31.988] (==) No screen section available. Using defaults.
[    31.988] (**) |-->Screen "Default Screen Section" (0)
[    31.988] (**) |   |-->Monitor "<default monitor>"
[    31.988] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    31.988] (==) Automatically adding devices
[    31.988] (==) Automatically enabling devices
[    31.988] (==) Automatically adding GPU devices
[    31.988] (==) Automatically binding GPU devices
[    31.988] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    31.989] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    31.989] 	Entry deleted from font path.
[    31.990] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    31.990] (==) ModulePath set to "/usr/lib/xorg/modules"
[    31.990] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    31.990] (II) Loader magic: 0x822d60
[    31.990] (II) Module ABI versions:
[    31.990] 	X.Org ANSI C Emulation: 0.4
[    31.990] 	X.Org Video Driver: 23.0
[    31.990] 	X.Org XInput driver : 24.1
[    31.990] 	X.Org Server Extension : 10.0
[    31.991] (++) using VT number 1

[    31.992] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    31.994] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    31.994] (II) xfree86: Adding drm device (/dev/dri/card0)
[    31.995] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[    31.996] (--) PCI:*(0:0:2:0) 8086:191b:17aa:3802 rev 6, Mem @ 0x92000000/16777216, 0xa0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[    31.996] (--) PCI: (0:1:0:0) 10de:139b:17aa:3802 rev 162, Mem @ 0x93000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00004000/128
[    31.996] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    31.996] (II) LoadModule: "glx"
[    31.997] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    32.002] (II) Module glx: vendor="X.Org Foundation"
[    32.002] 	compiled for 1.19.3, module version = 1.0.0
[    32.002] 	ABI class: X.Org Server Extension, version 10.0
[    32.002] (II) Applying OutputClass "intel" to /dev/dri/card0
[    32.002] 	loading driver: modesetting
[    32.002] (==) Matched modesetting as autoconfigured driver 0
[    32.002] (==) Matched intel as autoconfigured driver 1
[    32.002] (==) Matched intel as autoconfigured driver 2
[    32.002] (==) Matched modesetting as autoconfigured driver 3
[    32.002] (==) Matched fbdev as autoconfigured driver 4
[    32.002] (==) Matched vesa as autoconfigured driver 5
[    32.002] (==) Assigned the driver to the xf86ConfigLayout
[    32.002] (II) LoadModule: "modesetting"
[    32.002] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    32.002] (II) Module modesetting: vendor="X.Org Foundation"
[    32.002] 	compiled for 1.19.3, module version = 1.19.3
[    32.002] 	Module class: X.Org Video Driver
[    32.002] 	ABI class: X.Org Video Driver, version 23.0
[    32.002] (II) LoadModule: "intel"
[    32.002] (WW) Warning, couldn't open module intel
[    32.002] (II) UnloadModule: "intel"
[    32.002] (II) Unloading intel
[    32.002] (EE) Failed to load module "intel" (module does not exist, 0)
[    32.002] (II) LoadModule: "fbdev"
[    32.002] (WW) Warning, couldn't open module fbdev
[    32.002] (II) UnloadModule: "fbdev"
[    32.002] (II) Unloading fbdev
[    32.002] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    32.002] (II) LoadModule: "vesa"
[    32.002] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[    32.003] (II) Module vesa: vendor="X.Org Foundation"
[    32.003] 	compiled for 1.19.0, module version = 2.3.4
[    32.003] 	Module class: X.Org Video Driver
[    32.003] 	ABI class: X.Org Video Driver, version 23.0
[    32.003] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    32.003] (II) VESA: driver for VESA chipsets: vesa
[    32.003] (II) modeset(0): using drv /dev/dri/card0
[    32.003] (WW) Falling back to old probe method for modesetting
[    32.003] (WW) Falling back to old probe method for vesa
[    32.003] (II) modeset(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    32.003] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[    32.003] (==) modeset(0): RGB weight 888
[    32.003] (==) modeset(0): Default visual is TrueColor
[    32.003] (II) Loading sub module "glamoregl"
[    32.003] (II) LoadModule: "glamoregl"
[    32.003] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[    32.006] (II) Module glamoregl: vendor="X.Org Foundation"
[    32.006] 	compiled for 1.19.3, module version = 1.0.0
[    32.006] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    32.006] (II) glamor: OpenGL accelerated X.org driver based.
[    32.035] (II) glamor: EGL version 1.4 (DRI2):
[    32.042] (II) modeset(0): glamor initialized
[    32.042] (II) modeset(0): Output eDP-1 has no monitor section
[    32.050] (II) modeset(0): Output HDMI-1 has no monitor section
[    32.050] (II) modeset(0): EDID for output eDP-1
[    32.050] (II) modeset(0): Manufacturer: LGD  Model: 4a7  Serial#: 0
[    32.050] (II) modeset(0): Year: 2015  Week: 0
[    32.050] (II) modeset(0): EDID Version: 1.4
[    32.050] (II) modeset(0): Digital Display Input
[    32.050] (II) modeset(0): 6 bits per channel
[    32.050] (II) modeset(0): Digital interface is DisplayPort
[    32.050] (II) modeset(0): Max Image Size [cm]: horiz.: 34  vert.: 19
[    32.051] (II) modeset(0): Gamma: 2.20
[    32.051] (II) modeset(0): DPMS capabilities: StandBy Suspend Off
[    32.051] (II) modeset(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    32.051] (II) modeset(0): First detailed timing is preferred mode
[    32.051] (II) modeset(0): Preferred mode is native pixel format and refresh rate
[    32.051] (II) modeset(0): redX: 0.580 redY: 0.350   greenX: 0.340 greenY: 0.560
[    32.051] (II) modeset(0): blueX: 0.155 blueY: 0.125   whiteX: 0.313 whiteY: 0.329
[    32.051] (II) modeset(0): Manufacturer's mask: 0
[    32.051] (II) modeset(0): Supported detailed timing:
[    32.051] (II) modeset(0): clock: 138.7 MHz   Image Size:  344 x 194 mm
[    32.051] (II) modeset(0): h_active: 1920  h_sync: 1968  h_sync_end 2000 h_blank_end 2080 h_border: 0
[    32.051] (II) modeset(0): v_active: 1080  v_sync: 1083  v_sync_end 1088 v_blanking: 1111 v_border: 0
[    32.051] (II) modeset(0):  LG Display
[    32.051] (II) modeset(0):  LP156WF6-SPK1
[    32.051] (II) modeset(0): EDID (in hex):
[    32.051] (II) modeset(0): 	00ffffffffffff0030e4a70400000000
[    32.051] (II) modeset(0): 	0019010495221378eaa1c59459578f27
[    32.051] (II) modeset(0): 	20505400000001010101010101010101
[    32.051] (II) modeset(0): 	0101010101012e3680a070381f403020
[    32.051] (II) modeset(0): 	350058c21000001a0000000000000000
[    32.051] (II) modeset(0): 	00000000000000000000000000fe004c
[    32.051] (II) modeset(0): 	4720446973706c61790a2020000000fe
[    32.051] (II) modeset(0): 	004c503135365746362d53504b31004f
[    32.051] (II) modeset(0): Printing probed modes for output eDP-1
[    32.051] (II) modeset(0): Modeline "1920x1080"x60.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    32.051] (II) modeset(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    32.051] (II) modeset(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    32.051] (II) modeset(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    32.051] (II) modeset(0): Modeline "1024x768"x120.1  133.47  1024 1100 1212 1400  768 768 770 794 doublescan -hsync +vsync (95.3 kHz d)
[    32.051] (II) modeset(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    32.051] (II) modeset(0): Modeline "960x720"x120.0  117.00  960 1024 1128 1300  720 720 722 750 doublescan -hsync +vsync (90.0 kHz d)
[    32.051] (II) modeset(0): Modeline "928x696"x120.1  109.15  928 976 1088 1264  696 696 698 719 doublescan -hsync +vsync (86.4 kHz d)
[    32.051] (II) modeset(0): Modeline "896x672"x120.0  102.40  896 960 1060 1224  672 672 674 697 doublescan -hsync +vsync (83.7 kHz d)
[    32.051] (II) modeset(0): Modeline "800x600"x120.0   81.00  800 832 928 1080  600 600 602 625 doublescan +hsync +vsync (75.0 kHz d)
[    32.051] (II) modeset(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    32.051] (II) modeset(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    32.051] (II) modeset(0): Modeline "700x525"x120.0   61.00  700 744 820 940  525 526 532 541 doublescan +hsync +vsync (64.9 kHz d)
[    32.051] (II) modeset(0): Modeline "640x512"x120.0   54.00  640 664 720 844  512 512 514 533 doublescan +hsync +vsync (64.0 kHz d)
[    32.051] (II) modeset(0): Modeline "640x480"x120.0   54.00  640 688 744 900  480 480 482 500 doublescan +hsync +vsync (60.0 kHz d)
[    32.051] (II) modeset(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    32.051] (II) modeset(0): Modeline "512x384"x120.0   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync (48.4 kHz d)
[    32.051] (II) modeset(0): Modeline "400x300"x120.6   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync (37.9 kHz d)
[    32.051] (II) modeset(0): Modeline "400x300"x112.7   18.00  400 412 448 512  300 300 301 312 doublescan +hsync +vsync (35.2 kHz d)
[    32.051] (II) modeset(0): Modeline "320x240"x120.1   12.59  320 328 376 400  240 245 246 262 doublescan -hsync -vsync (31.5 kHz d)
[    32.059] (II) modeset(0): EDID for output HDMI-1
[    32.059] (II) modeset(0): Output eDP-1 connected
[    32.059] (II) modeset(0): Output HDMI-1 disconnected
[    32.059] (II) modeset(0): Using exact sizes for initial modes
[    32.059] (II) modeset(0): Output eDP-1 using initial mode 1920x1080 +0+0
[    32.059] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[    32.059] (==) modeset(0): DPI set to (96, 96)
[    32.059] (II) Loading sub module "fb"
[    32.059] (II) LoadModule: "fb"
[    32.059] (II) Loading /usr/lib/xorg/modules/libfb.so
[    32.059] (II) Module fb: vendor="X.Org Foundation"
[    32.059] 	compiled for 1.19.3, module version = 1.0.0
[    32.059] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    32.059] (II) UnloadModule: "vesa"
[    32.059] (II) Unloading vesa
[    32.059] (==) Depth 24 pixmap format is 32 bpp
[    32.115] (==) modeset(0): Backing store enabled
[    32.115] (==) modeset(0): Silken mouse enabled
[    32.116] (II) modeset(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    32.116] (==) modeset(0): DPMS enabled
[    32.116] (II) modeset(0): [DRI2] Setup complete
[    32.116] (II) modeset(0): [DRI2]   DRI driver: i965
[    32.116] (II) modeset(0): [DRI2]   VDPAU driver: i965
[    32.116] (--) RandR disabled
[    32.121] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    32.121] (II) AIGLX: enabled GLX_ARB_create_context
[    32.121] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    32.121] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    32.121] (II) AIGLX: enabled GLX_INTEL_swap_event
[    32.121] (II) AIGLX: enabled GLX_SGI_swap_control
[    32.121] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    32.121] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    32.121] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    32.121] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    32.121] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    32.121] (II) AIGLX: Loaded and initialized i965
[    32.121] (II) GLX: Initialized DRI2 GL provider for screen 0
[    32.124] (II) modeset(0): Damage tracking initialized
[    32.124] (II) modeset(0): Setting screen physical size to 508 x 285
[    32.175] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    32.175] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    32.175] (II) LoadModule: "libinput"
[    32.175] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    32.178] (II) Module libinput: vendor="X.Org Foundation"
[    32.178] 	compiled for 1.19.3, module version = 0.25.1
[    32.178] 	Module class: X.Org XInput Driver
[    32.178] 	ABI class: X.Org XInput driver, version 24.1
[    32.178] (II) Using input driver 'libinput' for 'Power Button'
[    32.178] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 23 paused 0
[    32.178] (**) Power Button: always reports core events
[    32.178] (**) Option "Device" "/dev/input/event5"
[    32.178] (**) Option "_source" "server/udev"
[    32.178] (II) event5  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    32.178] (II) event5  - (II) Power Button: (II) device is a keyboard
[    32.178] (II) event5  - (II) Power Button: (II) device removed
[    32.178] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event5"
[    32.178] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    32.179] (II) event5  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    32.179] (II) event5  - (II) Power Button: (II) device is a keyboard
[    32.179] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    32.179] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    32.179] (II) Using input driver 'libinput' for 'Video Bus'
[    32.179] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 26 paused 0
[    32.179] (**) Video Bus: always reports core events
[    32.179] (**) Option "Device" "/dev/input/event10"
[    32.179] (**) Option "_source" "server/udev"
[    32.180] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    32.180] (II) event10 - (II) Video Bus: (II) device is a keyboard
[    32.180] (II) event10 - (II) Video Bus: (II) device removed
[    32.180] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input12/event10"
[    32.180] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    32.180] (II) event10 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    32.180] (II) event10 - (II) Video Bus: (II) device is a keyboard
[    32.180] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[    32.180] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    32.180] (II) Using input driver 'libinput' for 'Video Bus'
[    32.181] (II) systemd-logind: got fd for /dev/input/event9 13:73 fd 27 paused 0
[    32.181] (**) Video Bus: always reports core events
[    32.181] (**) Option "Device" "/dev/input/event9"
[    32.181] (**) Option "_source" "server/udev"
[    32.181] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    32.181] (II) event9  - (II) Video Bus: (II) device is a keyboard
[    32.181] (II) event9  - (II) Video Bus: (II) device removed
[    32.181] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/LNXVIDEO:00/input/input11/event9"
[    32.181] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 8)
[    32.181] (II) event9  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    32.181] (II) event9  - (II) Video Bus: (II) device is a keyboard
[    32.181] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    32.181] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    32.181] (II) Using input driver 'libinput' for 'Power Button'
[    32.182] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 28 paused 0
[    32.182] (**) Power Button: always reports core events
[    32.182] (**) Option "Device" "/dev/input/event3"
[    32.182] (**) Option "_source" "server/udev"
[    32.182] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    32.182] (II) event3  - (II) Power Button: (II) device is a keyboard
[    32.182] (II) event3  - (II) Power Button: (II) device removed
[    32.182] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4/event3"
[    32.182] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 9)
[    32.182] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    32.182] (II) event3  - (II) Power Button: (II) device is a keyboard
[    32.182] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[    32.182] (II) No input driver specified, ignoring this device.
[    32.182] (II) This device may have been added with another device file.
[    32.182] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[    32.182] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    32.182] (II) Using input driver 'libinput' for 'Sleep Button'
[    32.183] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 29 paused 0
[    32.183] (**) Sleep Button: always reports core events
[    32.183] (**) Option "Device" "/dev/input/event4"
[    32.183] (**) Option "_source" "server/udev"
[    32.183] (II) event4  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    32.183] (II) event4  - (II) Sleep Button: (II) device is a keyboard
[    32.183] (II) event4  - (II) Sleep Button: (II) device removed
[    32.183] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5/event4"
[    32.183] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 10)
[    32.183] (II) event4  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    32.183] (II) event4  - (II) Sleep Button: (II) device is a keyboard
[    32.184] (II) config/udev: Adding input device Lenovo Lenovo Y Gaming Precision Mouse (/dev/input/event1)
[    32.184] (**) Lenovo Lenovo Y Gaming Precision Mouse: Applying InputClass "libinput pointer catchall"
[    32.184] (**) Lenovo Lenovo Y Gaming Precision Mouse: Applying InputClass "libinput keyboard catchall"
[    32.184] (II) Using input driver 'libinput' for 'Lenovo Lenovo Y Gaming Precision Mouse'
[    32.184] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 30 paused 0
[    32.184] (**) Lenovo Lenovo Y Gaming Precision Mouse: always reports core events
[    32.184] (**) Option "Device" "/dev/input/event1"
[    32.184] (**) Option "_source" "server/udev"
[    32.184] (II) event1  - (II) Lenovo Lenovo Y Gaming Precision Mouse: (II) is tagged by udev as: Keyboard Mouse
[    32.184] (II) event1  - (II) Lenovo Lenovo Y Gaming Precision Mouse: (II) device is a pointer
[    32.184] (II) event1  - (II) Lenovo Lenovo Y Gaming Precision Mouse: (II) device is a keyboard
[    32.184] (II) event1  - (II) Lenovo Lenovo Y Gaming Precision Mouse: (II) device removed
[    32.184] (II) libinput: Lenovo Lenovo Y Gaming Precision Mouse: needs a virtual subdevice
[    32.184] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:17EF:6078.0001/input/input2/event1"
[    32.184] (II) XINPUT: Adding extended input device "Lenovo Lenovo Y Gaming Precision Mouse" (type: MOUSE, id 11)
[    32.185] (**) Option "AccelerationScheme" "none"
[    32.185] (**) Lenovo Lenovo Y Gaming Precision Mouse: (accel) selected scheme none/0
[    32.185] (**) Lenovo Lenovo Y Gaming Precision Mouse: (accel) acceleration factor: 2.000
[    32.185] (**) Lenovo Lenovo Y Gaming Precision Mouse: (accel) acceleration threshold: 4
[    32.185] (II) event1  - (II) Lenovo Lenovo Y Gaming Precision Mouse: (II) is tagged by udev as: Keyboard Mouse
[    32.185] (II) event1  - (II) Lenovo Lenovo Y Gaming Precision Mouse: (II) device is a pointer
[    32.185] (II) event1  - (II) Lenovo Lenovo Y Gaming Precision Mouse: (II) device is a keyboard
[    32.185] (II) config/udev: Adding input device Lenovo Lenovo Y Gaming Precision Mouse (/dev/input/mouse0)
[    32.185] (II) No input driver specified, ignoring this device.
[    32.185] (II) This device may have been added with another device file.
[    32.185] (II) config/udev: Adding input device Lenovo EasyCamera (/dev/input/event7)
[    32.185] (**) Lenovo EasyCamera: Applying InputClass "libinput keyboard catchall"
[    32.185] (II) Using input driver 'libinput' for 'Lenovo EasyCamera'
[    32.186] (II) systemd-logind: got fd for /dev/input/event7 13:71 fd 31 paused 0
[    32.186] (**) Lenovo EasyCamera: always reports core events
[    32.186] (**) Option "Device" "/dev/input/event7"
[    32.186] (**) Option "_source" "server/udev"
[    32.186] (II) event7  - (II) Lenovo EasyCamera: (II) is tagged by udev as: Keyboard
[    32.186] (II) event7  - (II) Lenovo EasyCamera: (II) device is a keyboard
[    32.186] (II) event7  - (II) Lenovo EasyCamera: (II) device removed
[    32.186] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-6/1-6:1.0/input/input9/event7"
[    32.186] (II) XINPUT: Adding extended input device "Lenovo EasyCamera" (type: KEYBOARD, id 12)
[    32.186] (II) event7  - (II) Lenovo EasyCamera: (II) is tagged by udev as: Keyboard
[    32.186] (II) event7  - (II) Lenovo EasyCamera: (II) device is a keyboard
[    32.186] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event8)
[    32.186] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[    32.186] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[    32.187] (II) systemd-logind: got fd for /dev/input/event8 13:72 fd 32 paused 0
[    32.187] (**) Ideapad extra buttons: always reports core events
[    32.187] (**) Option "Device" "/dev/input/event8"
[    32.187] (**) Option "_source" "server/udev"
[    32.187] (II) event8  - (II) Ideapad extra buttons: (II) is tagged by udev as: Keyboard
[    32.187] (II) event8  - (II) Ideapad extra buttons: (II) device is a keyboard
[    32.187] (II) event8  - (II) Ideapad extra buttons: (II) device removed
[    32.187] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input10/event8"
[    32.187] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 13)
[    32.187] (II) event8  - (II) Ideapad extra buttons: (II) is tagged by udev as: Keyboard
[    32.187] (II) event8  - (II) Ideapad extra buttons: (II) device is a keyboard
[    32.188] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[    32.188] (II) No input driver specified, ignoring this device.
[    32.188] (II) This device may have been added with another device file.
[    32.188] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event13)
[    32.188] (II) No input driver specified, ignoring this device.
[    32.188] (II) This device may have been added with another device file.
[    32.188] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event14)
[    32.188] (II) No input driver specified, ignoring this device.
[    32.188] (II) This device may have been added with another device file.
[    32.188] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event15)
[    32.188] (II) No input driver specified, ignoring this device.
[    32.188] (II) This device may have been added with another device file.
[    32.188] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event16)
[    32.188] (II) No input driver specified, ignoring this device.
[    32.188] (II) This device may have been added with another device file.
[    32.188] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event17)
[    32.188] (II) No input driver specified, ignoring this device.
[    32.188] (II) This device may have been added with another device file.
[    32.188] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=9 (/dev/input/event18)
[    32.188] (II) No input driver specified, ignoring this device.
[    32.188] (II) This device may have been added with another device file.
[    32.188] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=10 (/dev/input/event19)
[    32.188] (II) No input driver specified, ignoring this device.
[    32.188] (II) This device may have been added with another device file.
[    32.189] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    32.189] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    32.189] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    32.189] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 33 paused 0
[    32.189] (**) AT Translated Set 2 keyboard: always reports core events
[    32.189] (**) Option "Device" "/dev/input/event0"
[    32.189] (**) Option "_source" "server/udev"
[    32.189] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    32.189] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    32.189] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[    32.189] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    32.189] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
[    32.190] (II) event0  - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[    32.190] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[    32.190] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event11)
[    32.190] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[    32.190] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[    32.190] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 34 paused 0
[    32.190] (**) ETPS/2 Elantech Touchpad: always reports core events
[    32.190] (**) Option "Device" "/dev/input/event11"
[    32.190] (**) Option "_source" "server/udev"
[    32.190] (II) event11 - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[    32.190] (II) event11 - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[    32.190] (II) event11 - (II) ETPS/2 Elantech Touchpad: (II) device removed
[    32.191] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event11"
[    32.191] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 15)
[    32.191] (**) Option "AccelerationScheme" "none"
[    32.191] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[    32.191] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[    32.191] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[    32.191] (II) event11 - (II) ETPS/2 Elantech Touchpad: (II) is tagged by udev as: Touchpad
[    32.191] (II) event11 - (II) ETPS/2 Elantech Touchpad: (II) device is a touchpad
[    32.191] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse1)
[    32.191] (II) No input driver specified, ignoring this device.
[    32.191] (II) This device may have been added with another device file.
[    32.191] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    32.191] (II) No input driver specified, ignoring this device.
[    32.191] (II) This device may have been added with another device file.
[    32.203] (**) Lenovo Lenovo Y Gaming Precision Mouse: Applying InputClass "libinput pointer catchall"
[    32.203] (**) Lenovo Lenovo Y Gaming Precision Mouse: Applying InputClass "libinput keyboard catchall"
[    32.203] (II) Using input driver 'libinput' for 'Lenovo Lenovo Y Gaming Precision Mouse'
[    32.203] (II) systemd-logind: returning pre-existing fd for /dev/input/event1 13:65
[    32.203] (**) Lenovo Lenovo Y Gaming Precision Mouse: always reports core events
[    32.203] (**) Option "Device" "/dev/input/event1"
[    32.203] (**) Option "_source" "_driver/libinput"
[    32.203] (II) libinput: Lenovo Lenovo Y Gaming Precision Mouse: is a virtual subdevice
[    32.203] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:17EF:6078.0001/input/input2/event1"
[    32.203] (II) XINPUT: Adding extended input device "Lenovo Lenovo Y Gaming Precision Mouse" (type: KEYBOARD, id 16)
[    32.517] (II) modeset(0): EDID vendor "LGD", prod id 1191
[    32.517] (II) modeset(0): Printing DDC gathered Modelines:
[    32.517] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    32.657] (II) modeset(0): EDID vendor "LGD", prod id 1191
[    32.657] (II) modeset(0): Printing DDC gathered Modelines:
[    32.657] (II) modeset(0): Modeline "1920x1080"x0.0  138.70  1920 1968 2000 2080  1080 1083 1088 1111 +hsync -vsync (66.7 kHz eP)
[    87.408] (**) Option "fd" "23"
[    87.408] (II) event5  - (II) Power Button: (II) device removed
[    87.408] (**) Option "fd" "26"
[    87.408] (II) event10 - (II) Video Bus: (II) device removed
[    87.408] (**) Option "fd" "27"
[    87.408] (II) event9  - (II) Video Bus: (II) device removed
[    87.408] (**) Option "fd" "28"
[    87.408] (II) event3  - (II) Power Button: (II) device removed
[    87.408] (**) Option "fd" "29"
[    87.408] (II) event4  - (II) Sleep Button: (II) device removed
[    87.408] (**) Option "fd" "30"
[    87.408] (**) Option "fd" "31"
[    87.408] (II) event7  - (II) Lenovo EasyCamera: (II) device removed
[    87.409] (**) Option "fd" "32"
[    87.409] (II) event8  - (II) Ideapad extra buttons: (II) device removed
[    87.409] (**) Option "fd" "33"
[    87.409] (II) event0  - (II) AT Translated Set 2 keyboard: (II) device removed
[    87.409] (**) Option "fd" "34"
[    87.409] (II) event11 - (II) ETPS/2 Elantech Touchpad: (II) device removed
[    87.409] (**) Option "fd" "30"
[    87.409] (II) event1  - (II) Lenovo Lenovo Y Gaming Precision Mouse: (II) device removed
[    87.409] (II) UnloadModule: "libinput"
[    87.409] (II) systemd-logind: not releasing fd for 13:65, still in use
[    87.409] (II) UnloadModule: "libinput"
[    87.409] (II) systemd-logind: releasing fd for 13:75
[    87.463] (II) UnloadModule: "libinput"
[    87.463] (II) systemd-logind: releasing fd for 13:64
[    87.500] (II) UnloadModule: "libinput"
[    87.500] (II) systemd-logind: releasing fd for 13:72
[    87.540] (II) UnloadModule: "libinput"
[    87.540] (II) systemd-logind: releasing fd for 13:71
[    87.580] (II) UnloadModule: "libinput"
[    87.580] (II) systemd-logind: releasing fd for 13:65
[    87.620] (II) UnloadModule: "libinput"
[    87.620] (II) systemd-logind: releasing fd for 13:68
[    87.640] (II) UnloadModule: "libinput"
[    87.640] (II) systemd-logind: releasing fd for 13:67
[    87.660] (II) UnloadModule: "libinput"
[    87.660] (II) systemd-logind: releasing fd for 13:73
[    87.680] (II) UnloadModule: "libinput"
[    87.680] (II) systemd-logind: releasing fd for 13:74
[    87.700] (II) UnloadModule: "libinput"
[    87.700] (II) systemd-logind: releasing fd for 13:69
[    88.821] (II) Server terminated successfully (0). Closing log file.


here's my Xorg log
Is it working proberly ?

Offline

#6 2017-06-30 07:39:55

saw_mj
Member
Registered: 2017-06-12
Posts: 49

Re: Xorg configuration issues

seth wrote:

It's a hybrid setup, so the optimus/bumblebee approach is correct. Sorry, I would not know how to help you if you can actually not find any help in the relevant wiki articles. Maybe try more than 25 minutes (at best) to understand them?

I read it twice before and it doesn't help me with the main problem which is .... I can't generate configuration files for Xorg, and when i try to create it manually it fails whe i restart X.

Which means i can't fix the screen tearing .

but anyway Thank you. hope there's somebody can help me here

Offline

#7 2017-06-30 07:43:07

jasonwryan
Anarchist
From: .nz
Registered: 2009-05-09
Posts: 30,426
Website

Re: Xorg configuration issues

"it fails" is not an error message: https://bbs.archlinux.org/viewtopic.php?id=57855

Arch + dwm   •   Mercurial repos  •   Surfraw

Registered Linux User #482438

Offline

#8 2017-06-30 07:55:53

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 25,435

Re: Xorg configuration issues

You should not create configuration files nor generate them . Get your Xorg and the bumblebee setup working correctly FIRST and then look into adjusting whatever with specific configuration snippets.

Your last Xorg log shows a working Xorg. As mentioned if you do an adjustment and it fails, you should post the file you created/changed and the error message.

Last edited by V1del (2017-06-30 07:59:14)

Offline

#9 2017-07-01 13:36:17

saw_mj
Member
Registered: 2017-06-12
Posts: 49

Re: Xorg configuration issues

OK, guys
I'm sorry for the confusion i made

I will try to explain my problem proberly

my problem is Screen Tearing, in both graphical cards cause even when i try to play a video using "optrium" screen tearing still appears

so the problem solvation in the Wiki "intel" is to edit the configuration file  /etc/X11/xorg.conf.d/20-intel.conf

which i don't have so i created a conf file as mentioned in the wiki and add the bellow 

Section "Device"
	Identifier  "Intel Graphics"
	Driver      "intel"
	Option	    "DRI"	"false"
	Option "AccelMethod"
	Option "TearFree" "true"
EndSection

and after a reboot i tried to startx

it gave me this error 

X.Org X Server 1.19.3
Release Date: 2017-03-15
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.9.11-1-ARCH x86_64 
Current Operating System: Linux Arch 4.11.6-1-ARCH #1 SMP PREEMPT Sat Jun 17 08:19:42 CEST 2017 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ae70fac3-0ce2-4942-aba2-f5ca3a5377eb rw quiet
Build Date: 07 April 2017  05:42:48PM
 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/home/saw/.local/share/xorg/Xorg.0.log", Time: Sat Jul  1 17:08:41 2017
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE) 
Fatal server error:
(EE) no screens found(EE) 
(EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
(EE) Please also check the log file at "/home/saw/.local/share/xorg/Xorg.0.log" for additional information.
(EE) 
(EE) Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error

and the log 

[   496.172] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[   496.172] X Protocol Version 11, Revision 0
[   496.172] Build Operating System: Linux 4.9.11-1-ARCH x86_64 
[   496.172] Current Operating System: Linux Arch 4.11.6-1-ARCH #1 SMP PREEMPT Sat Jun 17 08:19:42 CEST 2017 x86_64
[   496.172] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=ae70fac3-0ce2-4942-aba2-f5ca3a5377eb rw quiet
[   496.172] Build Date: 07 April 2017  05:42:48PM
[   496.172]  
[   496.172] Current version of pixman: 0.34.0
[   496.172] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   496.172] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   496.172] (==) Log file: "/home/saw/.local/share/xorg/Xorg.0.log", Time: Sat Jul  1 17:08:41 2017
[   496.172] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   496.172] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   496.172] (==) No Layout section.  Using the first Screen section.
[   496.172] (==) No screen section available. Using defaults.
[   496.172] (**) |-->Screen "Default Screen Section" (0)
[   496.172] (**) |   |-->Monitor "<default monitor>"
[   496.173] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[   496.173] (**) |   |-->Device "Intel Graphics"
[   496.173] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   496.173] (==) Automatically adding devices
[   496.173] (==) Automatically enabling devices
[   496.173] (==) Automatically adding GPU devices
[   496.173] (==) Automatically binding GPU devices
[   496.173] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   496.173] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[   496.173] 	Entry deleted from font path.
[   496.173] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[   496.173] (==) ModulePath set to "/usr/lib/xorg/modules"
[   496.173] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   496.173] (II) Loader magic: 0x822d60
[   496.173] (II) Module ABI versions:
[   496.173] 	X.Org ANSI C Emulation: 0.4
[   496.173] 	X.Org Video Driver: 23.0
[   496.173] 	X.Org XInput driver : 24.1
[   496.173] 	X.Org Server Extension : 10.0
[   496.174] (++) using VT number 1

[   496.174] (--) controlling tty is VT number 1, auto-enabling KeepTty
[   496.176] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[   496.176] (II) xfree86: Adding drm device (/dev/dri/card0)
[   496.177] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[   496.179] (--) PCI:*(0:0:2:0) 8086:191b:17aa:3802 rev 6, Mem @ 0x92000000/16777216, 0xa0000000/268435456, I/O @ 0x00005000/64, BIOS @ 0x????????/131072
[   496.179] (--) PCI: (0:1:0:0) 10de:139b:17aa:3802 rev 162, Mem @ 0x93000000/16777216, 0x80000000/268435456, 0x90000000/33554432, I/O @ 0x00004000/128
[   496.179] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   496.179] (II) LoadModule: "glx"
[   496.179] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   496.181] (II) Module glx: vendor="X.Org Foundation"
[   496.181] 	compiled for 1.19.3, module version = 1.0.0
[   496.181] 	ABI class: X.Org Server Extension, version 10.0
[   496.181] (II) LoadModule: "intel"
[   496.181] (WW) Warning, couldn't open module intel
[   496.181] (II) UnloadModule: "intel"
[   496.181] (II) Unloading intel
[   496.181] (EE) Failed to load module "intel" (module does not exist, 0)
[   496.181] (EE) No drivers available.
[   496.181] (EE) 
Fatal server error:
[   496.181] (EE) no screens found(EE) 
[   496.181] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[   496.181] (EE) Please also check the log file at "/home/saw/.local/share/xorg/Xorg.0.log" for additional information.
[   496.181] (EE) 
[   496.226] (EE) Server terminated with error (1). Closing log file.

That was intel
-----
when i try to solve the problem for Nvidia as mentioned in the Wiki for bumblebee

$ optirun nvidia-settings -c :8

X Server XVideo Settings -> Sync to VBlank and OpenGL Settings -> Sync to VBlank

i don't see these options.
well i don't have any options!

Offline

#10 2017-07-01 14:02:05

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,881

Re: Xorg configuration issues

saw_mj wrote:
Section "Device"
	Identifier  "Intel Graphics"
	Driver      "intel"
	Option	    "DRI"	"false"
	Option "AccelMethod"
	Option "TearFree" "true"
EndSection

First of all: Where *exactly* (ie. link, please) in the wiki did you pick that shit up? It needs immediate fixing!

Disabling DRI is borderline stupid and  Option "AccelMethod" is an illegal statement, you'd go for sth. like eg. Option "AccelMethod" "sna"

On top of that the log looks like you don't even have xf86-video-intel installed (what means you're not following the bumblebee approach) and your trouble is with the modesetting driver to begin with?

The nvidia GPU is "only" a 3D controller, it cannot sync with anything because it's not attached to anything. Optirun or not doesn't matter.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#11 2017-07-01 14:52:30

saw_mj
Member
Registered: 2017-06-12
Posts: 49

Re: Xorg configuration issues

seth wrote:
saw_mj wrote:
Section "Device"
	Identifier  "Intel Graphics"
	Driver      "intel"
	Option	    "DRI"	"false"
	Option "AccelMethod"
	Option "TearFree" "true"
EndSection

First of all: Where *exactly* (ie. link, please) in the wiki did you pick that shit up? It needs immediate fixing!

Disabling DRI is borderline stupid and  Option "AccelMethod" is an illegal statement, you'd go for sth. like eg. Option "AccelMethod" "sna"

On top of that the log looks like you don't even have xf86-video-intel installed (what means you're not following the bumblebee approach) and your trouble is with the modesetting driver to begin with?

The nvidia GPU is "only" a 3D controller, it cannot sync with anything because it's not attached to anything. Optirun or not doesn't matter.

Disabling DRI

https://wiki.archlinux.org/index.php/in … ke_support

and for  the intel driver, i was installing it at the beginning but i read in somewikis that this driver causes problems so it's not recommended to install, that's why i uninstalled to test but it didn't help anyways

----edit---
and by the way i tried to make the configuration file very simple without any options and it failed too

Last edited by saw_mj (2017-07-01 14:57:43)

Offline

#12 2017-07-01 14:59:32

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,881

Re: Xorg configuration issues

That section suggest to disable hardware acceleration as last resort to prevent crashes and freeze - not to deal with tearing ...
Configuring the intel driver is obviously no good idea if it's not installed and the cause for your failures.
Also iirc bubmlebee won't even work with the modesetting driver controlling the intel chip.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#13 2017-07-01 15:04:55

saw_mj
Member
Registered: 2017-06-12
Posts: 49

Re: Xorg configuration issues

Anyway i think i screwed up my Arch so i will do a clean installation again.

so what do you suggest to solve the screen tearing?

considering i installed bumblebee as described in the wikipage

Offline

#14 2017-07-01 15:07:26

saw_mj
Member
Registered: 2017-06-12
Posts: 49

Re: Xorg configuration issues

seth wrote:

That section suggest to disable hardware acceleration as last resort to prevent crashes and freeze - not to deal with tearing ...
Configuring the intel driver is obviously no good idea if it's not installed and the cause for your failures.
Also iirc bubmlebee won't even work with the modesetting driver controlling the intel chip.

you mean that the problem was with the intel driver ? cause it wasn't installed ?

Offline

#15 2017-07-01 15:10:57

adesh
Member
Registered: 2016-10-05
Posts: 167

Re: Xorg configuration issues

May I suggest to use a compositor like compton for video tearing problem.
This does not solve the exact issue with the graphics but will get your videos and scrolling problem fixed. Also it is generally not a good idea to force restrictions/hardlocking things in lower layers of a system.

Offline

#16 2017-07-01 16:06:03

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 78,881

Re: Xorg configuration issues

The imminent problem was that you told the system to use the intel driver despite the fact that (in contrast to the information you provided in the OP) it wasn't installed, yes.
As long as xf86-video-intel isn't installed, it doesn't matter how simply you configure it. That you configure to use a non-existing driver module is sufficient to break things.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

Pages: 1

Board footer

Powered by FluxBB