You are not logged in.

Pages: 1

#1 2017-08-06 16:54:16

Yurashina
Member
Registered: 2013-10-28
Posts: 8

[solved][AMD][X.org]unable to start Xorg server & getting a crash

Hi here,

I did a new install of my archlinux, installed all i need, configured Xorg and all to use catalyst(AMD)

But when i doing startx with the kernel:

  • linux-lts 4.9: he crash

  • linux-ck-haswell 4.11: he crash

I give log and xorg configuration files:

Xorg.0.log linux-lts

[    32.948] 
X.Org X Server 1.17.4
Release Date: 2015-10-28
[    32.948] X Protocol Version 11, Revision 0
[    32.948] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[    32.948] Current Operating System: Linux Angemoka 4.9.40-1-lts #1 SMP Fri Jul 28 21:45:40 CEST 2017 x86_64
[    32.948] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-lts root=UUID=a5b70081-7028-4612-951b-51aab4849fdd rw vga=980 nomodeset
[    32.948] Build Date: 01 November 2015  10:36:50AM
[    32.948]  
[    32.948] Current version of pixman: 0.34.0
[    32.948] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    32.948] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    32.948] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug  6 19:06:49 2017
[    33.010] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    33.010] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    33.075] (==) ServerLayout "Madok"
[    33.075] (**) |-->Screen "Screen0" (0)
[    33.075] (**) |   |-->Monitor "Monitor0"
[    33.076] (**) |   |-->Device "Device0"
[    33.076] (==) Automatically adding devices
[    33.076] (==) Automatically enabling devices
[    33.076] (==) Automatically adding GPU devices
[    33.109] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    33.109] 	Entry deleted from font path.
[    33.110] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    33.110] (==) ModulePath set to "/usr/lib/xorg/modules"
[    33.110] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    33.111] (II) Loader magic: 0x817d60
[    33.111] (II) Module ABI versions:
[    33.111] 	X.Org ANSI C Emulation: 0.4
[    33.111] 	X.Org Video Driver: 19.0
[    33.111] 	X.Org XInput driver : 21.1
[    33.111] 	X.Org Server Extension : 9.0
[    33.115] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    33.118] (--) PCI:*(0:1:0:0) 1002:6798:174b:3001 rev 0, Mem @ 0xc0000000/268435456, 0xdfe00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    33.119] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    33.119] (II) LoadModule: "glx"
[    33.147] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    33.159] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    33.159] 	compiled for 6.9.0, module version = 1.0.0
[    33.159] (II) LoadModule: "fglrx"
[    33.159] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    33.303] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    33.303] 	compiled for 1.4.99.906, module version = 15.30.3
[    33.303] 	Module class: X.Org Video Driver
[    33.305] (II) Loading sub module "fglrxdrm"
[    33.305] (II) LoadModule: "fglrxdrm"
[    33.305] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    33.335] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    33.335] 	compiled for 1.4.99.906, module version = 15.30.3
[    33.335] (II) AMD Proprietary Linux Driver Version Identifier:15.30.3
[    33.335] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.302                   
[    33.335] (II) AMD Proprietary Linux Driver Build Date: Dec 17 2015 02:43:16
[    33.335] (++) using VT number 1

[    33.335] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    33.335] (WW) Falling back to old probe method for fglrx
[    33.394] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    33.396] ukiDynamicMajor: found major device number 248
[    33.396] ukiDynamicMajor: found major device number 248
[    33.396] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    33.396] ukiOpenDevice: node name is /dev/ati/card0
[    33.396] ukiOpenDevice: open result is 10, (OK)
[    33.766] ukiOpenByBusid: ukiOpenMinor returns 10
[    33.766] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    33.833] (--) Chipset Supported AMD Graphics Processor (0x6798) found
[    33.834] (WW) fglrx: No matching Device section for instance (BusID PCI:0@1:0:1) found
[    33.836] (II) fglrx(0): pEnt->device->identifier=0x187a8c0
[    33.836] (II) fglrx(0): === [xdl_xs117_atiddxPreInit] === begin
[    33.836] (II) fglrx(0): FB driver is enabled
[    33.836] (II) Loading sub module "vgahw"
[    33.836] (II) LoadModule: "vgahw"
[    33.836] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[    33.848] (II) Module vgahw: vendor="X.Org Foundation"
[    33.848] 	compiled for 1.17.4, module version = 0.1.0
[    33.848] 	ABI class: X.Org Video Driver, version 19.0
[    33.849] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[    33.849] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[    33.849] (==) fglrx(0): Default visual is TrueColor
[    33.849] (**) fglrx(0): Option "DPMS" "true"
[    33.849] (==) fglrx(0): RGB weight 888
[    33.849] (II) fglrx(0): Using 8 bits per RGB 
[    33.849] (==) fglrx(0): Buffer Tiling is ON
[    33.849] (II) Loading sub module "fglrxdrm"
[    33.849] (II) LoadModule: "fglrxdrm"
[    33.849] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    33.849] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    33.849] 	compiled for 1.4.99.906, module version = 15.30.3
[    33.850] ukiDynamicMajor: found major device number 248
[    33.850] ukiDynamicMajor: found major device number 248
[    33.850] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    33.850] ukiOpenDevice: node name is /dev/ati/card0
[    33.850] ukiOpenDevice: open result is 12, (OK)
[    33.850] ukiOpenByBusid: ukiOpenMinor returns 12
[    33.850] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    33.850] (**) fglrx(0): NoAccel = NO
[    33.850] (**) fglrx(0): AMD 2D Acceleration Architecture enabled
[    33.850] (--) fglrx(0): Chipset: "AMD Radeon R9 200 Series                            " (Chipset = 0x6798)
[    33.850] (--) fglrx(0): (PciSubVendor = 0x174b, PciSubDevice = 0x3001)
[    33.850] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original AMD
[    33.850] (--) fglrx(0): Linear framebuffer (phys) at 0xc0000000
[    33.850] (--) fglrx(0): MMIO registers at 0xdfe00000
[    33.850] (--) fglrx(0): I/O port at 0x0000e000
[    33.850] (==) fglrx(0): ROM-BIOS at 0x000c0000
[    33.851] (II) fglrx(0): AC Adapter is used
[    33.851] (II) fglrx(0): AMD Video BIOS revision 9 or later detected
[    33.851] (--) fglrx(0): Video RAM: 3145728 kByte, Type: GDDR5
[    33.851] (II) fglrx(0): PCIE card detected
[    33.851] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[    33.851] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[    33.851] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf400000000, MCFBSize = 0xc0000000)
[    33.851] (II) fglrx(0): RandR 1.2 support is enabled!
[    33.851] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[    33.851] (II) Loading sub module "fb"
[    33.851] (II) LoadModule: "fb"
[    33.851] (II) Loading /usr/lib/xorg/modules/libfb.so
[    33.860] (II) Module fb: vendor="X.Org Foundation"
[    33.860] 	compiled for 1.17.4, module version = 1.0.0
[    33.860] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    33.860] (II) fglrx(0): EDID Management option: EDID Management is enabled
[    33.860] (II) Loading sub module "ddc"
[    33.860] (II) LoadModule: "ddc"
[    33.860] (II) Module "ddc" already built-in
[    34.310] (II) fglrx(0): Output DFP1 using monitor section Monitor0
[    34.310] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[    34.310] (II) fglrx(0): Output DFP2 has no monitor section
[    34.310] (II) fglrx(0): Output DFP3 has no monitor section
[    34.310] (II) fglrx(0): Output DFP4 has no monitor section
[    34.310] (II) fglrx(0): Output DFP5 has no monitor section
[    34.310] (II) fglrx(0): Output DFP6 has no monitor section
[    34.310] (II) fglrx(0): Output DFP7 has no monitor section
[    34.310] (II) fglrx(0): Output CRT1 has no monitor section
[    34.310] (II) Loading sub module "ddc"
[    34.310] (II) LoadModule: "ddc"
[    34.310] (II) Module "ddc" already built-in
[    34.310] (II) fglrx(0): Connected Display0: DFP7
[    34.310] (II) fglrx(0): Display0 EDID data ---------------------------
[    34.310] (II) fglrx(0): Manufacturer: ACI  Model: 2494  Serial#: 16843009
[    34.310] (II) fglrx(0): Year: 2013  Week: 51
[    34.310] (II) fglrx(0): EDID Version: 1.3
[    34.310] (II) fglrx(0): Digital Display Input
[    34.310] (II) fglrx(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    34.310] (II) fglrx(0): Gamma: 2.20
[    34.311] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    34.311] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    34.311] (II) fglrx(0): First detailed timing is preferred mode
[    34.311] (II) fglrx(0): redX: 0.650 redY: 0.333   greenX: 0.332 greenY: 0.623
[    34.311] (II) fglrx(0): blueX: 0.157 blueY: 0.053   whiteX: 0.313 whiteY: 0.329
[    34.311] (II) fglrx(0): Supported established timings:
[    34.311] (II) fglrx(0): 720x400@70Hz
[    34.311] (II) fglrx(0): 640x480@60Hz
[    34.311] (II) fglrx(0): 640x480@67Hz
[    34.311] (II) fglrx(0): 640x480@72Hz
[    34.311] (II) fglrx(0): 640x480@75Hz
[    34.311] (II) fglrx(0): 800x600@56Hz
[    34.311] (II) fglrx(0): 800x600@60Hz
[    34.311] (II) fglrx(0): 800x600@72Hz
[    34.311] (II) fglrx(0): 800x600@75Hz
[    34.311] (II) fglrx(0): 832x624@75Hz
[    34.311] (II) fglrx(0): 1024x768@60Hz
[    34.311] (II) fglrx(0): 1024x768@70Hz
[    34.311] (II) fglrx(0): 1024x768@75Hz
[    34.311] (II) fglrx(0): 1280x1024@75Hz
[    34.311] (II) fglrx(0): Manufacturer's mask: 0
[    34.311] (II) fglrx(0): Supported standard timings:
[    34.311] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    34.311] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    34.311] (II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    34.311] (II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    34.311] (II) fglrx(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    34.311] (II) fglrx(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    34.311] (II) fglrx(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    34.311] (II) fglrx(0): Supported detailed timing:
[    34.311] (II) fglrx(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    34.311] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    34.311] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    34.311] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    34.311] (II) fglrx(0): Monitor name: VE248
[    34.311] (II) fglrx(0): Serial No: DCLMQS094188
[    34.311] (II) fglrx(0): EDID (in hex):
[    34.311] (II) fglrx(0): 	00ffffffffffff000469942401010101
[    34.311] (II) fglrx(0): 	3317010380351e78ea9265a655559f28
[    34.311] (II) fglrx(0): 	0d5054bfef00714f818081409500a940
[    34.311] (II) fglrx(0): 	b300d1c00101023a801871382d40582c
[    34.311] (II) fglrx(0): 	4500132b2100001e000000fd00324c1e
[    34.311] (II) fglrx(0): 	5311000a202020202020000000fc0056
[    34.311] (II) fglrx(0): 	453234380a20202020202020000000ff
[    34.311] (II) fglrx(0): 	0044434c4d51533039343138380a0086
[    34.311] (II) fglrx(0): End of Display0 EDID data --------------------
[    34.311] (II) fglrx(0): Dynamic Surface Resizing Enabled
[    34.311] (II) fglrx(0): EDID for output DFP1
[    34.311] (II) fglrx(0): EDID for output DFP2
[    34.311] (II) fglrx(0): EDID for output DFP3
[    34.311] (II) fglrx(0): EDID for output DFP4
[    34.311] (II) fglrx(0): EDID for output DFP5
[    34.311] (II) fglrx(0): EDID for output DFP6
[    34.311] (II) fglrx(0): EDID for output DFP7
[    34.311] (II) fglrx(0): Manufacturer: ACI  Model: 2494  Serial#: 16843009
[    34.311] (II) fglrx(0): Year: 2013  Week: 51
[    34.311] (II) fglrx(0): EDID Version: 1.3
[    34.311] (II) fglrx(0): Digital Display Input
[    34.311] (II) fglrx(0): Max Image Size [cm]: horiz.: 53  vert.: 30
[    34.311] (II) fglrx(0): Gamma: 2.20
[    34.311] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[    34.311] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[    34.311] (II) fglrx(0): First detailed timing is preferred mode
[    34.311] (II) fglrx(0): redX: 0.650 redY: 0.333   greenX: 0.332 greenY: 0.623
[    34.311] (II) fglrx(0): blueX: 0.157 blueY: 0.053   whiteX: 0.313 whiteY: 0.329
[    34.311] (II) fglrx(0): Supported established timings:
[    34.311] (II) fglrx(0): 720x400@70Hz
[    34.311] (II) fglrx(0): 640x480@60Hz
[    34.311] (II) fglrx(0): 640x480@67Hz
[    34.311] (II) fglrx(0): 640x480@72Hz
[    34.311] (II) fglrx(0): 640x480@75Hz
[    34.311] (II) fglrx(0): 800x600@56Hz
[    34.311] (II) fglrx(0): 800x600@60Hz
[    34.311] (II) fglrx(0): 800x600@72Hz
[    34.311] (II) fglrx(0): 800x600@75Hz
[    34.311] (II) fglrx(0): 832x624@75Hz
[    34.311] (II) fglrx(0): 1024x768@60Hz
[    34.311] (II) fglrx(0): 1024x768@70Hz
[    34.311] (II) fglrx(0): 1024x768@75Hz
[    34.311] (II) fglrx(0): 1280x1024@75Hz
[    34.311] (II) fglrx(0): Manufacturer's mask: 0
[    34.311] (II) fglrx(0): Supported standard timings:
[    34.311] (II) fglrx(0): #0: hsize: 1152  vsize 864  refresh: 75  vid: 20337
[    34.311] (II) fglrx(0): #1: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[    34.311] (II) fglrx(0): #2: hsize: 1280  vsize 960  refresh: 60  vid: 16513
[    34.311] (II) fglrx(0): #3: hsize: 1440  vsize 900  refresh: 60  vid: 149
[    34.311] (II) fglrx(0): #4: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[    34.311] (II) fglrx(0): #5: hsize: 1680  vsize 1050  refresh: 60  vid: 179
[    34.311] (II) fglrx(0): #6: hsize: 1920  vsize 1080  refresh: 60  vid: 49361
[    34.311] (II) fglrx(0): Supported detailed timing:
[    34.311] (II) fglrx(0): clock: 148.5 MHz   Image Size:  531 x 299 mm
[    34.311] (II) fglrx(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[    34.311] (II) fglrx(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[    34.311] (II) fglrx(0): Ranges: V min: 50 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[    34.311] (II) fglrx(0): Monitor name: VE248
[    34.311] (II) fglrx(0): Serial No: DCLMQS094188
[    34.311] (II) fglrx(0): EDID (in hex):
[    34.311] (II) fglrx(0): 	00ffffffffffff000469942401010101
[    34.311] (II) fglrx(0): 	3317010380351e78ea9265a655559f28
[    34.311] (II) fglrx(0): 	0d5054bfef00714f818081409500a940
[    34.311] (II) fglrx(0): 	b300d1c00101023a801871382d40582c
[    34.311] (II) fglrx(0): 	4500132b2100001e000000fd00324c1e
[    34.311] (II) fglrx(0): 	5311000a202020202020000000fc0056
[    34.311] (II) fglrx(0): 	453234380a20202020202020000000ff
[    34.311] (II) fglrx(0): 	0044434c4d51533039343138380a0086
[    34.312] (II) fglrx(0): Printing probed modes for output DFP7
[    34.312] (II) fglrx(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[    34.312] (II) fglrx(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    34.312] (II) fglrx(0): Modeline "1680x1050"x60.0  146.25  1680 1784 1960 2240  1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[    34.312] (II) fglrx(0): Modeline "1400x1050"x60.0  162.00  1400 1664 1856 2160  1050 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    34.312] (II) fglrx(0): Modeline "1600x900"x60.0  162.00  1600 1664 1856 2160  900 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[    34.312] (II) fglrx(0): Modeline "1280x1024"x75.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[    34.312] (II) fglrx(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[    34.312] (II) fglrx(0): Modeline "1440x900"x60.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz e)
[    34.312] (II) fglrx(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz e)
[    34.312] (II) fglrx(0): Modeline "1152x864"x60.0  148.50  1152 2008 2052 2200  864 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[    34.312] (II) fglrx(0): Modeline "1152x864"x75.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz e)
[    34.312] (II) fglrx(0): Modeline "1280x768"x60.0  108.00  1280 1376 1488 1800  768 961 964 1000 +hsync +vsync (60.0 kHz e)
[    34.312] (II) fglrx(0): Modeline "1280x720"x60.0  108.00  1280 1376 1488 1800  720 961 964 1000 +hsync +vsync (60.0 kHz e)
[    34.312] (II) fglrx(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[    34.312] (II) fglrx(0): Modeline "1024x768"x70.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[    34.312] (II) fglrx(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[    34.312] (II) fglrx(0): Modeline "800x600"x72.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[    34.312] (II) fglrx(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[    34.312] (II) fglrx(0): Modeline "800x600"x60.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[    34.312] (II) fglrx(0): Modeline "800x600"x56.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[    34.312] (II) fglrx(0): Modeline "640x480"x72.0   31.50  640 656 696 832  480 481 484 520 -hsync -vsync (37.9 kHz e)
[    34.312] (II) fglrx(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[    34.312] (II) fglrx(0): Modeline "640x480"x67.0   26.75  640 656 720 800  480 483 487 502 -hsync +vsync (33.4 kHz e)
[    34.312] (II) fglrx(0): Modeline "640x480"x60.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[    34.312] (II) fglrx(0): EDID for output CRT1
[    34.312] (II) fglrx(0): Output DFP1 disconnected
[    34.312] (II) fglrx(0): Output DFP2 disconnected
[    34.312] (II) fglrx(0): Output DFP3 disconnected
[    34.312] (II) fglrx(0): Output DFP4 disconnected
[    34.312] (II) fglrx(0): Output DFP5 disconnected
[    34.312] (II) fglrx(0): Output DFP6 disconnected
[    34.312] (II) fglrx(0): Output DFP7 connected
[    34.312] (II) fglrx(0): Output CRT1 disconnected
[    34.312] (II) fglrx(0): Using exact sizes for initial modes
[    34.312] (II) fglrx(0): Output DFP7 using initial mode 1920x1080
[    34.312] (II) fglrx(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    34.312] (II) fglrx(0): DPI set to (96, 96)
[    34.312] (II) fglrx(0): Eyefinity capable adapter detected.
[    34.312] (II) fglrx(0): Adapter AMD Radeon R9 200 Series                             has 6 configurable heads and 1 displays connected.
[    34.312] (==) fglrx(0):  PseudoColor visuals disabled
[    34.312] (II) Loading sub module "ramdac"
[    34.312] (II) LoadModule: "ramdac"
[    34.312] (II) Module "ramdac" already built-in
[    34.312] (==) fglrx(0): NoDRI = NO
[    34.312] (==) fglrx(0): Capabilities: 0x00000000
[    34.313] (==) fglrx(0): CapabilitiesEx: 0x00000000
[    34.313] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[    34.313] (==) fglrx(0): UseFastTLS=0
[    34.313] (II) fglrx(0): Shadow Primary option: ShadowPrimary is enabled
[    34.313] (--) Depth 24 pixmap format is 32 bpp
[    34.313] (II) fglrx(0): doing swlDriScreenInit
[    34.313] (II) fglrx(0): swlDriScreenInit for fglrx driver
[    34.313] ukiDynamicMajor: found major device number 248
[    34.313] ukiDynamicMajor: found major device number 248
[    34.313] ukiDynamicMajor: found major device number 248
[    34.313] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    34.313] ukiOpenDevice: node name is /dev/ati/card0
[    34.313] ukiOpenDevice: open result is 13, (OK)
[    34.313] ukiOpenByBusid: ukiOpenMinor returns 13
[    34.313] ukiOpenByBusid: ukiGetBusid reports PCI:1:0:0
[    34.313] (II) fglrx(0): [uki] DRM interface version 1.0
[    34.313] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:1:0:0"
[    34.313] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[    34.313] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f9c1e7c6000
[    34.313] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[    34.313] (II) fglrx(0): [uki] added 1 reserved context for kernel
[    34.313] (II) fglrx(0): swlDriScreenInit done
[    34.313] (II) fglrx(0): Kernel Module Version Information:
[    34.313] (II) fglrx(0):     Name: fglrx
[    34.313] (II) fglrx(0):     Version: 15.20.3
[    34.313] (II) fglrx(0):     Date: Sep  8 2015
[    34.313] (II) fglrx(0):     Desc: AMD FireGL DRM kernel module
[    34.313] (WW) fglrx(0): Kernel Module version does *not* match driver.
[    34.313] (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
[    34.313] (EE) 
[    34.313] (EE) Backtrace:
[    34.350] (EE) 0: /usr/lib/xorg-server/Xorg (OsLookupColor+0x139) [0x596d09]
[    34.368] (EE) 1: /usr/lib/libc.so.6 (killpg+0x40) [0x7f9c1c1e597f]
[    34.395] (EE) 2: /usr/lib/xorg/modules/drivers/fglrx_drv.so (swlDrmFreeSurfaces+0x42) [0x7f9c18f1be72]
[    34.397] (EE) 3: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs117_atiddxDriCloseScreen+0x14d) [0x7f9c18ee0ddd]
[    34.398] (EE) 4: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs117_atiddxDriScreenInit+0x948) [0x7f9c18ee0478]
[    34.400] (EE) 5: /usr/lib/xorg/modules/drivers/fglrx_drv.so (xdl_xs117_atiddxScreenInit+0x118b) [0x7f9c18ed9f8b]
[    34.400] (EE) 6: /usr/lib/xorg-server/Xorg (AddScreen+0x101) [0x4392d1]
[    34.400] (EE) 7: /usr/lib/xorg-server/Xorg (InitOutput+0x43a) [0x47bcea]
[    34.400] (EE) 8: /usr/lib/xorg-server/Xorg (remove_fs_handlers+0x22a) [0x43ceaa]
[    34.401] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xea) [0x7f9c1c1d24ca]
[    34.401] (EE) 10: /usr/lib/xorg-server/Xorg (_start+0x29) [0x427489]
[    34.401] (EE) 
[    34.401] (EE) Segmentation fault at address 0x8b8
[    34.401] (EE) 
Fatal server error:
[    34.401] (EE) Caught signal 11 (Segmentation fault). Server aborting
[    34.401] (EE) 
[    34.401] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[    34.401] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[    34.401] (EE) 
[    34.412] (EE) Server terminated with error (1). Closing log file.

Xorg.0.log linux-ck-haswell

[    26.219] 
X.Org X Server 1.17.4
Release Date: 2015-10-28
[    26.220] X Protocol Version 11, Revision 0
[    26.220] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[    26.220] Current Operating System: Linux Angemoka 4.11.12-1-ck-haswell #1 SMP PREEMPT Fri Jul 21 16:55:40 EDT 2017 x86_64
[    26.220] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck-haswell root=UUID=a5b70081-7028-4612-951b-51aab4849fdd rw vga=980 nomodeset
[    26.220] Build Date: 01 November 2015  10:36:50AM
[    26.220]  
[    26.220] Current version of pixman: 0.34.0
[    26.220] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    26.220] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    26.220] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Aug  6 19:04:40 2017
[    26.282] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    26.282] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    26.347] (==) ServerLayout "Madok"
[    26.347] (**) |-->Screen "Screen0" (0)
[    26.347] (**) |   |-->Monitor "Monitor0"
[    26.348] (**) |   |-->Device "Device0"
[    26.348] (==) Automatically adding devices
[    26.348] (==) Automatically enabling devices
[    26.348] (==) Automatically adding GPU devices
[    26.380] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[    26.380] 	Entry deleted from font path.
[    26.382] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    26.382] (==) ModulePath set to "/usr/lib/xorg/modules"
[    26.382] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    26.382] (II) Loader magic: 0x817d60
[    26.382] (II) Module ABI versions:
[    26.382] 	X.Org ANSI C Emulation: 0.4
[    26.382] 	X.Org Video Driver: 19.0
[    26.382] 	X.Org XInput driver : 21.1
[    26.382] 	X.Org Server Extension : 9.0
[    26.384] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[    26.385] (--) PCI:*(0:1:0:0) 1002:6798:174b:3001 rev 0, Mem @ 0xc0000000/268435456, 0xdfe00000/262144, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[    26.385] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    26.386] (II) LoadModule: "glx"
[    26.402] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    26.414] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[    26.414] 	compiled for 6.9.0, module version = 1.0.0
[    26.414] (II) LoadModule: "fglrx"
[    26.414] (II) Loading /usr/lib/xorg/modules/drivers/fglrx_drv.so
[    26.550] (II) Module fglrx: vendor="FireGL - AMD Technologies Inc."
[    26.550] 	compiled for 1.4.99.906, module version = 15.30.3
[    26.550] 	Module class: X.Org Video Driver
[    26.551] (II) Loading sub module "fglrxdrm"
[    26.551] (II) LoadModule: "fglrxdrm"
[    26.551] (II) Loading /usr/lib/xorg/modules/linux/libfglrxdrm.so
[    26.582] (II) Module fglrxdrm: vendor="FireGL - AMD Technologies Inc."
[    26.582] 	compiled for 1.4.99.906, module version = 15.30.3
[    26.582] (II) AMD Proprietary Linux Driver Version Identifier:15.30.3
[    26.582] (II) AMD Proprietary Linux Driver Release Identifier: UNSUPPORTED-15.302                   
[    26.582] (II) AMD Proprietary Linux Driver Build Date: Dec 17 2015 02:43:16
[    26.582] (++) using VT number 1

[    26.582] (--) controlling tty is VT number 1, auto-enabling KeepTty
[    26.582] (WW) Falling back to old probe method for fglrx
[    26.666] (II) Loading PCS database from /etc/ati/amdpcsdb /etc/ati/amdpcsdb.default
[    26.668] ukiDynamicMajor: found major device number 248
[    26.668] ukiDynamicMajor: found major device number 248
[    26.668] ukiOpenByBusid: Searching for BusID PCI:1:0:0
[    26.668] ukiOpenDevice: node name is /dev/ati/card0
[    26.669] ukiOpenDevice: open result is 10, (OK)

xorg.conf.d/10-keyboard-layout.conf

Section "InputClass"
	Identifier	"Keyboard Layout"
	MatchIsKeyboard "yes"
	MatchDevicePath	"/dev/input/event*"
	Option		"XkbLayout" "fr"
EndSection

xorg.conf.d/10-monitor.conf (note: i running this PC with usually 2 screen, that normal if you see other screen and output with #)

Section "ServerLayout"
	Identifier "Madok"
	Screen  0  "Screen0" 0 0
	#Screen     "Screen1" 1920 0
	#Option     "Xinerama" "0"
EndSection

Section "Monitor"
        Identifier "Monitor0"
        VendorName "ASUS"
        ModelName "What you see"
	Option	"PreferredMode" "1920x1080"
	#Option "Position" "0 0"
        Option "DPMS" "true"
EndSection

#Section "Monitor"
        #Identifier "Monitor1"
        #VendorName "Fujitsu Siemens"
        #ModelName "P20-1"
	#Option "PreferredMode" "1600x1200"
	#Option "Position" "1920 -60"
	#Option "DPMS" "1"
#EndSection

Section "Device"
    Identifier     "Device0"
    Driver         "fglrx" 
    VendorName     "Sapphire"
    BoardName      "R9 280X Tri-X Vapor-X"
    BusID          "PCI:1:0:0"
EndSection

#Section "Device"
#    Identifier     "Device1"
#    Driver         "fglrx"
#    VendorName     "Sapphire"
#    BoardName      "R9 280X Tri-X Vapor-X"
#    BusID          "PCI:1:0:0"
#   Screen 	   1
#EndSection

Section "Screen"
    Identifier     "Screen0"
    Device         "Device0"
    Monitor       "Monitor0"
    DefaultDepth    24
    SubSection     "Display"
        Depth       24
        Modes 	   "1920x1080_60"
    EndSubSection
EndSection

#Section "Screen"
#	Identifier     "Screen1"
#	Device         "Device1"
#	Monitor       "Monitor1"
#	DefaultDepth    24
#	SubSection     "Display"
#        	Depth       24
#   	 	Modes      "1600x1200_60"
#    EndSubSection
#EndSection

Thank for advance

Last edited by Yurashina (2017-08-07 10:08:25)

Offline

#2 2017-08-06 19:05:26

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,344

Re: [solved][AMD][X.org]unable to start Xorg server & getting a crash

to use catalyst(AMD)

Why? AMD has abandoned fglrx.

X.Org X Server 1.17.4
Release Date: 2015-10-28

Which distro do you use?
If the answer is archlinux, how and what did you downgrade?

[    34.313] (WW) fglrx(0): Kernel Module version does *not* match driver.
[    34.313] (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
[    34.313] (EE) 
[    34.313] (EE) Backtrace:

The other log exits "early", it's hard to say why it fails, but probably for similar reasons.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2017-08-06 19:27:12

Yurashina
Member
Registered: 2013-10-28
Posts: 8

Re: [solved][AMD][X.org]unable to start Xorg server & getting a crash

seth wrote:

to use catalyst(AMD)

Why? AMD has abandoned fglrx.

X.Org X Server 1.17.4
Release Date: 2015-10-28

Which distro do you use?
If the answer is archlinux, how and what did you downgrade?

[    34.313] (WW) fglrx(0): Kernel Module version does *not* match driver.
[    34.313] (EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
[    34.313] (EE) 
[    34.313] (EE) Backtrace:

The other log exits "early", it's hard to say why it fails, but probably for similar reasons.

AMD was not abandonned GNU/linux too?

I use Archlinux as usual, that not changed since 6 years^^

i did the downgrade because the latest xorg is supposed to be not supported by Catalyst driver, that why i use the repo [xorg117] and catalyst

Offline

#4 2017-08-06 19:43:35

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,344

Re: [solved][AMD][X.org]unable to start Xorg server & getting a crash

AMD was not abandonned GNU/linux too?

Sorry, but I can't read sense into this ;-)
AMD still supports linux, nowadays through the AMDGPU drivers. But they abandoned fglrx. The driver is no longer maintained nor developed (and was a PITA to begin with ;-)

See https://wiki.archlinux.org/index.php/AMD_Catalyst

Catalyst packages are no longer offered in the official repositories. It is no longer updated by AMD and does not support the latest Xorg, so installing an old Xorg is required.


I know that you downgraded "something" and installed "something", but "something" went wrong - you've an fglrx kernel module installed that doesn't match the xorg driver.
That's why you need to explain what *exactly* you installed & downgraded.

The overall question though remains why you're trying to use fglrx itfp.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#5 2017-08-06 20:58:31

Yurashina
Member
Registered: 2013-10-28
Posts: 8

Re: [solved][AMD][X.org]unable to start Xorg server & getting a crash

Well, i didn't know than AMGPU was now the main driver and supported by amd.

So, AMDGPU will give around or better performance, because that what i looked

Offline

#6 2017-08-06 21:27:14

seth
Member
From: Won't reply 2 private help req
Registered: 2012-09-03
Posts: 76,344

Re: [solved][AMD][X.org]unable to start Xorg server & getting a crash

AMD supports the radeon and amdgpu drivers. You've a volcanic island GPU, which is (supposed to be) fully supported by the AMDGPU driver, so try that one (first)

About performance: try. There is no other way, because it also depends on what you're doing with the card. As soon as you can click "Vulkan", you'll be better off w/ AMDGPU for quite sure.
In addition, there's https://aur.archlinux.org/packages/amdgpu-pro/

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#7 2017-08-07 10:07:58

Yurashina
Member
Registered: 2013-10-28
Posts: 8

Re: [solved][AMD][X.org]unable to start Xorg server & getting a crash

I did a test with the AMDGPU drivers ingame, the result was very good, more like far better than the old deprecatied driver fglrx.
btw and ofc, the problem about X.org & my r9 280x is resolved.
Thank for the help smile

Offline

Pages: 1

Board footer

Powered by FluxBB