You are not logged in.
- Topics: Active | Unanswered
#1 2017-08-13 21:36:22
- jimmybirer
- Member
- Registered: 2017-08-13
- Posts: 4
fuse module gives segmentation fault error
I'm using the stable (default) branch of Arch Linux, when I try to load the fuse module it gives segmentation fault, no errors or anything.
when I do sudo modprobe fuse then cat /proc/modules | grep fuse I see nothing. sudo modprobe fuse gives a segmentation fault as I said.
what can I do about this now? thanks for all the help.
Offline
#2 2017-08-13 21:43:12
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,270
Re: fuse module gives segmentation fault error
Welcome to the forum.
Ensure to read up this sticky https://bbs.archlinux.org/viewtopic.php?id=57855
On topic:
There's no "stable (default) branch of Arch Linux"
Please provide the output of
uname -a
modinfo fuse
dmesgAnd please wrap the output in code tags.
Next: Segfault in what? The kernel? modprobe? Please provide the actual error message.
Offline
#3 2017-08-13 21:46:36
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,373
Re: fuse module gives segmentation fault error
What kernel version is the system using? has this issue always been present or did the module load successfully on a different kernel version?
Please post the dmesg for the affected system and the backtrace from the coredump
Offline
#4 2017-08-13 22:03:56
- jimmybirer
- Member
- Registered: 2017-08-13
- Posts: 4
Re: fuse module gives segmentation fault error
seth wrote:
Welcome to the forum.
Ensure to read up this sticky https://bbs.archlinux.org/viewtopic.php?id=57855On topic:
There's no "stable (default) branch of Arch Linux"
Please provide the output ofuname -a modinfo fuse dmesgAnd please wrap the output in code tags.
Next: Segfault in what? The kernel? modprobe? Please provide the actual error message.
Hello, thank you for the warm welcome and interest. Here are the outputs you requested.
Linux debugger 4.12.4-1-ARCH #1 SMP PREEMPT Fri Jul 28 18:54:18 UTC 2017 x86_64 GNU/Linuxfilename: /lib/modules/4.12.4-1-ARCH/kernel/fs/fuse/fuse.ko.gz
alias: devname:fuse
alias: char-major-10-229
alias: fs-fuseblk
alias: fs-fuse
license: GPL
description: Filesystem in Userspace
author: Miklos Szeredi <miklos@szeredi.hu>
alias: fs-fusectl
depends:
intree: Y
vermagic: 4.12.4-1-ARCH SMP preempt mod_unload modversions
parm: max_user_bgreq:Global limit for the maximum number of backgrounded requests an unprivileged user can set (uint)
parm: max_user_congthresh:Global limit for the maximum congestion threshold an unprivileged user can set (uint)[ 0.000000] microcode: microcode updated early to revision 0x1c, date = 2015-02-26
[ 0.000000] Linux version 4.12.4-1-ARCH (builduser@nspawn-9860) (gcc version 7.1.1 20170630 (GCC) ) #1 SMP PREEMPT Fri Jul 28 18:54:18 UTC 2017
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rootfstype=ext4 rw rootflags=rw,relatime,data=ordered cgroup_disable=memory
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
[ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000c6ab6fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c6ab7000-0x00000000c6cb8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c6cb9000-0x00000000d6ad2fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000d6ad3000-0x00000000daeeefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000daeef000-0x00000000daf9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000daf9f000-0x00000000daffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000dafff000-0x00000000daffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000db000000-0x00000000df9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000011f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: CASPER BILGISAYAR SISTEMLERI A.S CASPER NIRVANA NOTEBOOK/CASPER NIRVANA NOTEBOOK, BIOS 2.00.03.CA.T2 04/11/2013
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x11f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0C0000000 mask FE0000000 write-back
[ 0.000000] 4 base 0DC000000 mask FFC000000 uncachable
[ 0.000000] 5 base 0DB000000 mask FFF000000 uncachable
[ 0.000000] 6 base 100000000 mask FE0000000 write-back
[ 0.000000] 7 base 11F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 11F600000 mask FFFE00000 uncachable
[ 0.000000] 9 disabled
[ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
[ 0.000000] e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [ffff9a46800f0100]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff9a4680097000] 97000 size 24576
[ 0.000000] BRK [0x90d5f000, 0x90d5ffff] PGTABLE
[ 0.000000] BRK [0x90d60000, 0x90d60fff] PGTABLE
[ 0.000000] BRK [0x90d61000, 0x90d61fff] PGTABLE
[ 0.000000] BRK [0x90d62000, 0x90d62fff] PGTABLE
[ 0.000000] BRK [0x90d63000, 0x90d63fff] PGTABLE
[ 0.000000] BRK [0x90d64000, 0x90d64fff] PGTABLE
[ 0.000000] BRK [0x90d65000, 0x90d65fff] PGTABLE
[ 0.000000] BRK [0x90d66000, 0x90d66fff] PGTABLE
[ 0.000000] BRK [0x90d67000, 0x90d67fff] PGTABLE
[ 0.000000] BRK [0x90d68000, 0x90d68fff] PGTABLE
[ 0.000000] BRK [0x90d69000, 0x90d69fff] PGTABLE
[ 0.000000] BRK [0x90d6a000, 0x90d6afff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x36e41000-0x37717fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0120 000024 (v02 CASPER)
[ 0.000000] ACPI: XSDT 0x00000000DAFFE170 00009C (v01 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: FACP 0x00000000DAFEE000 00010C (v05 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: DSDT 0x00000000DAFF1000 0093D9 (v02 CASPER IVB-CPT 00000000 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000DAF7D000 000040
[ 0.000000] ACPI: SLIC 0x00000000DAFFD000 000176 (v01 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DAFFB000 001068 (v01 CASPER PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: ASF! 0x00000000DAFF0000 0000A5 (v32 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: HPET 0x00000000DAFED000 000038 (v01 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: APIC 0x00000000DAFEC000 000098 (v03 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: MCFG 0x00000000DAFEB000 00003C (v01 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: FPDT 0x00000000DAFEA000 000064 (v01 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: SSDT 0x00000000DAFE9000 000926 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000DAFE8000 000B22 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x00000000DAFE7000 00003E (v01 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFE6000 000042 (v01 PTL COMBUF 00000001 PTL 00000001)
[ 0.000000] ACPI: MSDM 0x00000000DAF7A000 000055 (v03 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: UEFI 0x00000000DAFE5000 00027E (v01 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: DBG2 0x00000000DAFE4000 000098 (v00 CASPER ERA 00000002 PTL 00000002)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000011f5fffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x11f5fa000-0x11f5fefff]
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x000000011f5fffff]
[ 0.000000] Device empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x000000001fffffff]
[ 0.000000] node 0: [mem 0x0000000020200000-0x0000000040003fff]
[ 0.000000] node 0: [mem 0x0000000040005000-0x00000000c6ab6fff]
[ 0.000000] node 0: [mem 0x00000000c6cb9000-0x00000000d6ad2fff]
[ 0.000000] node 0: [mem 0x00000000dafff000-0x00000000daffffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x000000011f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000011f5fffff]
[ 0.000000] On node 0 totalpages: 1006701
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 13660 pages used for memmap
[ 0.000000] DMA32 zone: 874193 pages, LIFO batch:31
[ 0.000000] Normal zone: 2008 pages used for memmap
[ 0.000000] Normal zone: 128512 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics memory at 0x00000000dba00000-0x00000000df9fffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x40004000-0x40004fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc6ab7000-0xc6cb8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xd6ad3000-0xdaeeefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaeef000-0xdaf9efff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdaf9f000-0xdaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdb000000-0xdf9fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xdfa00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffc00000-0xffffffff]
[ 0.000000] e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] percpu: Embedded 35 pages/cpu @ffff9a479f200000 s106328 r8192 d28840 u262144
[ 0.000000] pcpu-alloc: s106328 r8192 d28840 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 990948
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda1 rootfstype=ext4 rw rootflags=rw,relatime,data=ordered cgroup_disable=memory
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3871232K/4026804K available (6539K kernel code, 1124K rwdata, 2048K rodata, 1324K init, 912K bss, 155572K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] ftrace: allocating 27931 entries in 110 pages
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.003333] tsc: Detected 2494.225 MHz processor
[ 0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.30 BogoMIPS (lpj=8314083)
[ 0.003333] pid_max: default: 32768 minimum: 301
[ 0.003333] ACPI: Core revision 20170303
[ 0.015456] ACPI: 4 ACPI AML tables successfully acquired and loaded
[ 0.015503] Security Framework initialized
[ 0.015505] Yama: becoming mindful.
[ 0.015882] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.017868] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.018778] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.018785] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019418] Disabling memory control group subsystem
[ 0.019461] CPU: Physical Processor ID: 0
[ 0.019463] CPU: Processor Core ID: 0
[ 0.019470] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.019471] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.019476] mce: CPU supports 7 MCE banks
[ 0.019489] CPU0: Thermal monitoring enabled (TM1)
[ 0.019507] process: using mwait in idle threads
[ 0.019511] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[ 0.019512] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.019726] Freeing SMP alternatives memory: 24K
[ 0.021076] smpboot: Max logical packages: 4
[ 0.021157] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.021614] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.054636] TSC deadline timer enabled
[ 0.054640] smpboot: CPU0: Intel(R) Core(TM) i3-3120M CPU @ 2.50GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[ 0.066679] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[ 0.066718] ... version: 3
[ 0.066719] ... bit width: 48
[ 0.066720] ... generic registers: 4
[ 0.066722] ... value mask: 0000ffffffffffff
[ 0.066723] ... max period: 00007fffffffffff
[ 0.066724] ... fixed-purpose events: 3
[ 0.066725] ... event mask: 000000070000000f
[ 0.086905] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.093338] smp: Bringing up secondary CPUs ...
[ 0.120019] x86: Booting SMP configuration:
[ 0.120021] .... node #0, CPUs: #1 #2 #3
[ 0.425355] smp: Brought up 1 node, 4 CPUs
[ 0.425355] smpboot: Total of 4 processors activated (19966.15 BogoMIPS)
[ 0.426844] sched_clock: Marking stable (426666624, 0)->(424583247, 2083377)
[ 0.427171] devtmpfs: initialized
[ 0.427251] x86/mm: Memory block size: 128MB
[ 0.432435] PM: Registering ACPI NVS region [mem 0xdaeef000-0xdaf9efff] (720896 bytes)
[ 0.432550] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.432567] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.432664] pinctrl core: initialized pinctrl subsystem
[ 0.432715] RTC time: 18:22:51, date: 08/13/17
[ 0.432864] NET: Registered protocol family 16
[ 0.433366] cpuidle: using governor ladder
[ 0.433422] cpuidle: using governor menu
[ 0.433425] PCCT header not found.
[ 0.433466] ACPI: bus type PCI registered
[ 0.433469] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.433584] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.433609] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.433621] PCI: Using configuration type 1 for base access
[ 0.433685] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[ 0.433951] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.433952] mtrr: probably your BIOS does not setup all CPUs.
[ 0.433953] mtrr: corrected configuration.
[ 0.435000] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.435344] ACPI: Added _OSI(Module Device)
[ 0.435345] ACPI: Added _OSI(Processor Device)
[ 0.435346] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.435347] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.435497] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.439512] ACPI: Dynamic OEM Table Load:
[ 0.439527] ACPI: SSDT 0xFFFF9A4799E0D000 00083B (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.440081] ACPI: Dynamic OEM Table Load:
[ 0.440091] ACPI: SSDT 0xFFFF9A4799F37000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.440478] ACPI: Dynamic OEM Table Load:
[ 0.440487] ACPI: SSDT 0xFFFF9A4799EF0600 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.441742] ACPI : EC: EC started
[ 0.441743] ACPI : EC: interrupt blocked
[ 0.442942] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.442946] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.442948] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.442949] ACPI: Interpreter enabled
[ 0.442989] ACPI: (supports S0 S3 S4 S5)
[ 0.442991] ACPI: Using IOAPIC for interrupt routing
[ 0.443032] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.455962] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.455970] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.456197] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[ 0.457010] PCI host bridge to bus 0000:00
[ 0.457014] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.457017] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.457019] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.457021] pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff window]
[ 0.457024] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.457037] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.457197] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.457216] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.457229] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.457238] pci 0000:00:02.0: reg 0x20: [io 0x4000-0x403f]
[ 0.457434] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.457474] pci 0000:00:14.0: reg 0x10: [mem 0xf0600000-0xf060ffff 64bit]
[ 0.457610] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.457688] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.457760] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.457792] pci 0000:00:1a.0: reg 0x10: [mem 0xf0618000-0xf06183ff]
[ 0.457952] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.458052] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.458117] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.458155] pci 0000:00:1b.0: reg 0x10: [mem 0xf0610000-0xf0613fff 64bit]
[ 0.458310] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.458396] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.458457] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.458612] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.458695] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.458754] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.458905] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.458987] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.459060] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.459092] pci 0000:00:1d.0: reg 0x10: [mem 0xf0617000-0xf06173ff]
[ 0.459250] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.459348] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.459407] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.459693] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.459726] pci 0000:00:1f.2: reg 0x10: [io 0x4088-0x408f]
[ 0.459742] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.459758] pci 0000:00:1f.2: reg 0x18: [io 0x4080-0x4087]
[ 0.459774] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.459791] pci 0000:00:1f.2: reg 0x20: [io 0x4060-0x407f]
[ 0.459808] pci 0000:00:1f.2: reg 0x24: [mem 0xf0616000-0xf06167ff]
[ 0.459903] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.460029] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.460067] pci 0000:00:1f.3: reg 0x10: [mem 0xf0614000-0xf06140ff 64bit]
[ 0.460113] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
[ 0.460414] pci 0000:01:00.0: [10ec:8176] type 00 class 0x028000
[ 0.460478] pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.460565] pci 0000:01:00.0: reg 0x18: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.460868] pci 0000:01:00.0: supports D1 D2
[ 0.460870] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.460960] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.470122] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.470128] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.470135] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.470267] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.470305] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.470353] pci 0000:02:00.0: reg 0x18: [mem 0xf0404000-0xf0404fff 64bit pref]
[ 0.470384] pci 0000:02:00.0: reg 0x20: [mem 0xf0400000-0xf0403fff 64bit pref]
[ 0.470542] pci 0000:02:00.0: supports D1 D2
[ 0.470544] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.470614] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.480114] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.480121] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.480134] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.481128] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.481219] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.481307] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.481394] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.481480] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.481567] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.481653] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.481739] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.482068] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.482167] ACPI : EC: interrupt unblocked
[ 0.482174] ACPI : EC: event unblocked
[ 0.482183] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x11, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.482186] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[ 0.482324] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.482327] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[ 0.482332] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.482333] vgaarb: loaded
[ 0.482398] EDAC MC: Ver: 3.0.0
[ 0.482615] PCI: Using ACPI for IRQ routing
[ 0.486367] PCI: pci_cache_line_size set to 64 bytes
[ 0.486437] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[ 0.486440] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.486441] e820: reserve RAM buffer [mem 0xc6ab7000-0xc7ffffff]
[ 0.486443] e820: reserve RAM buffer [mem 0xd6ad3000-0xd7ffffff]
[ 0.486445] e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
[ 0.486446] e820: reserve RAM buffer [mem 0x11f600000-0x11fffffff]
[ 0.486584] NetLabel: Initializing
[ 0.486586] NetLabel: domain hash size = 128
[ 0.486587] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.486612] NetLabel: unlabeled traffic allowed by default
[ 0.487245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.487255] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.489289] clocksource: Switched to clocksource hpet
[ 0.505350] VFS: Disk quotas dquot_6.6.0
[ 0.505382] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.505508] pnp: PnP ACPI init
[ 0.506140] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.506143] system 00:00: [io 0x1000-0x100f] has been reserved
[ 0.506146] system 00:00: [io 0xffff] has been reserved
[ 0.506148] system 00:00: [io 0xffff] has been reserved
[ 0.506151] system 00:00: [io 0x0400-0x0453] has been reserved
[ 0.506153] system 00:00: [io 0x0458-0x047f] has been reserved
[ 0.506156] system 00:00: [io 0x0500-0x057f] has been reserved
[ 0.506158] system 00:00: [io 0x164e-0x164f] has been reserved
[ 0.506165] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.506204] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.506287] system 00:02: [io 0x0454-0x0457] has been reserved
[ 0.506291] system 00:02: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.506380] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.506429] pnp 00:04: Plug and Play ACPI device, IDs SYN0e0f PNP0f03 (active)
[ 0.506634] system 00:05: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.506637] system 00:05: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.506640] system 00:05: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.506642] system 00:05: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.506645] system 00:05: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.506648] system 00:05: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.506650] system 00:05: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.506652] system 00:05: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.506655] system 00:05: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.506658] system 00:05: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.506661] system 00:05: [mem 0xfffff000-0xffffffff] has been reserved
[ 0.506665] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.507016] pnp: PnP ACPI: found 6 devices
[ 0.515015] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.515058] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.515063] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.515072] pci 0000:00:1c.0: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.515087] pci 0000:00:1c.1: PCI bridge to [bus 02]
[ 0.515091] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.515104] pci 0000:00:1c.1: bridge window [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.515117] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.515119] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.515122] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.515124] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff window]
[ 0.515127] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.515129] pci_bus 0000:01: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.515131] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.515133] pci_bus 0000:02: resource 2 [mem 0xf0400000-0xf04fffff 64bit pref]
[ 0.515292] NET: Registered protocol family 2
[ 0.515528] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.515656] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.515760] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.515807] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.515828] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.515904] NET: Registered protocol family 1
[ 0.515927] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[ 0.516801] PCI: CLS 64 bytes, default 64
[ 0.516862] Unpacking initramfs...
[ 0.753962] Freeing initrd memory: 9052K
[ 0.753967] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.753971] software IO TLB [mem 0xd2ad3000-0xd6ad3000] (64MB) mapped at [ffff9a4752ad3000-ffff9a4756ad2fff]
[ 0.754340] Scanning for low memory corruption every 60 seconds
[ 0.755353] Initialise system trusted keyrings
[ 0.755367] Key type blacklist registered
[ 0.755450] workingset: timestamp_bits=40 max_order=20 bucket_order=0
[ 0.757325] zbud: loaded
[ 0.758422] Key type asymmetric registered
[ 0.758450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[ 0.758476] io scheduler noop registered
[ 0.758477] io scheduler deadline registered
[ 0.758502] io scheduler cfq registered (default)
[ 0.758503] io scheduler mq-deadline registered
[ 0.758503] io scheduler kyber registered
[ 0.758523] io scheduler bfq registered
[ 0.758868] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.758869] vesafb: scrolling: redraw
[ 0.758870] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.758878] vesafb: framebuffer at 0xe0000000, mapped to 0xffffb07a01000000, using 4160k, total 4160k
[ 0.827104] Console: switching to colour frame buffer device 170x48
[ 0.895074] fb0: VESA VGA frame buffer device
[ 0.895084] intel_idle: MWAIT substates: 0x21120
[ 0.895085] intel_idle: v0.4.1 model 0x3A
[ 0.895289] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.898831] GHES: HEST is not enabled!
[ 0.898892] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.899296] Linux agpgart interface v0.103
[ 0.899712] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 0.899739] rtc_cmos 00:01: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.899747] intel_pstate: Intel P-state driver initializing
[ 0.899929] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.899982] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[ 0.900309] NET: Registered protocol family 10
[ 0.905986] Segment Routing with IPv6
[ 0.906022] NET: Registered protocol family 17
[ 0.906457] RAS: Correctable Errors collector initialized.
[ 0.906513] microcode: sig=0x306a9, pf=0x10, revision=0x1c
[ 0.906614] microcode: Microcode Update Driver: v2.2.
[ 0.906826] registered taskstats version 1
[ 0.906836] Loading compiled-in X.509 certificates
[ 0.906859] zswap: loaded using pool lzo/zbud
[ 0.907354] Magic number: 13:720:392
[ 0.907385] platform PNP0C0D:00: hash matches
[ 0.907393] acpi PNP0C0D:00: hash matches
[ 0.907481] rtc_cmos 00:01: setting system clock to 2017-08-13 18:22:52 UTC (1502648572)
[ 0.908667] PM: Hibernation image not present or could not be loaded.
[ 0.911083] Freeing unused kernel memory: 1324K
[ 0.911085] Write protecting the kernel read-only data: 10240k
[ 0.911778] Freeing unused kernel memory: 1640K
[ 0.938108] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[ 0.938112] ACPI: Power Button [PWRB]
[ 0.938209] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[ 0.938228] ACPI: Lid Switch [LID]
[ 0.938285] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.938289] ACPI: Sleep Button [SLPB]
[ 0.938353] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.938355] ACPI: Power Button [PWRF]
[ 0.948598] [drm] Memory usable by graphics device = 2048M
[ 0.948600] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 0.948601] fb: switching to inteldrmfb from VESA VGA
[ 0.948625] Console: switching to colour dummy device 80x25
[ 0.948707] [drm] Replacing VGA console driver
[ 0.954826] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.954827] [drm] Driver supports precise vblank timestamp query.
[ 0.956518] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 0.999167] [drm] Initialized i915 1.6.0 20170403 for 0000:00:02.0 on minor 0
[ 1.000150] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 1.004744] ACPI Warning: \_SB.PCI0.GFX0.DD02._BQC: Return type mismatch - found Reference, expected Integer (20170303/nspredef-290)
[ 1.006948] acpi device:41: registered as cooling_device4
[ 1.007036] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 1.028402] fbcon: inteldrmfb (fb0) is primary device
[ 1.762734] tsc: Refined TSC clocksource calibration: 2494.333 MHz
[ 1.762746] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x23f45085418, max_idle_ns: 440795285711 ns
[ 1.797816] Console: switching to colour frame buffer device 170x48
[ 1.819610] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 1.887442] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.896653] i8042: Detected active multiplexing controller, rev 1.1
[ 1.898082] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.898131] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.898156] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.898192] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.898227] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.899104] ACPI: bus type USB registered
[ 1.899129] usbcore: registered new interface driver usbfs
[ 1.899141] usbcore: registered new interface driver hub
[ 1.899235] usbcore: registered new device driver usb
[ 1.899789] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.900513] ehci-pci: EHCI PCI platform driver
[ 1.900611] SCSI subsystem initialized
[ 1.900651] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 1.900663] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.900675] ehci-pci 0000:00:1a.0: debug port 2
[ 1.903245] libata version 3.00 loaded.
[ 1.904587] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 1.904602] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf0618000
[ 1.916107] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.916330] hub 1-0:1.0: USB hub found
[ 1.916336] hub 1-0:1.0: 3 ports detected
[ 1.916617] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.916621] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.916633] ehci-pci 0000:00:1d.0: debug port 2
[ 1.920545] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 1.920558] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf0617000
[ 1.932814] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.933196] hub 2-0:1.0: USB hub found
[ 1.933210] hub 2-0:1.0: 3 ports detected
[ 1.933800] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.933814] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.934923] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[ 1.934932] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.935210] hub 3-0:1.0: USB hub found
[ 1.935222] hub 3-0:1.0: 4 ports detected
[ 1.935695] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.935700] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.935885] hub 4-0:1.0: USB hub found
[ 1.935897] hub 4-0:1.0: 4 ports detected
[ 1.936501] ahci 0000:00:1f.2: version 3.0
[ 1.946915] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 1.946921] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.957220] scsi host0: ahci
[ 1.957421] scsi host1: ahci
[ 1.957607] scsi host2: ahci
[ 1.957897] scsi host3: ahci
[ 1.958099] scsi host4: ahci
[ 1.958314] scsi host5: ahci
[ 1.958389] ata1: SATA max UDMA/133 abar m2048@0xf0616000 port 0xf0616100 irq 26
[ 1.958391] ata2: DUMMY
[ 1.958394] ata3: SATA max UDMA/133 abar m2048@0xf0616000 port 0xf0616200 irq 26
[ 1.958396] ata4: DUMMY
[ 1.958397] ata5: DUMMY
[ 1.958398] ata6: DUMMY
[ 1.958991] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input5
[ 2.236115] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 2.252781] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 2.273428] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.273460] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.277391] ata3.00: ATAPI: Slimtype DVD A DU8A5SH, NX12, max UDMA/100
[ 2.278254] ata3.00: configured for UDMA/100
[ 2.313498] ata1.00: ATA-8: ST500LT012-9WS142, 0002SDM1, max UDMA/133
[ 2.313502] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 2.356150] ata1.00: configured for UDMA/133
[ 2.356625] scsi 0:0:0:0: Direct-Access ATA ST500LT012-9WS14 SDM1 PQ: 0 ANSI: 5
[ 2.373641] hub 1-1:1.0: USB hub found
[ 2.374390] hub 1-1:1.0: 6 ports detected
[ 2.390286] hub 2-1:1.0: USB hub found
[ 2.390454] hub 2-1:1.0: 6 ports detected
[ 2.399173] scsi 2:0:0:0: CD-ROM Slimtype DVD A DU8A5SH NX12 PQ: 0 ANSI: 5
[ 2.423353] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[ 2.423360] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.423393] sd 0:0:0:0: [sda] Write Protect is off
[ 2.423398] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.423449] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.444986] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.444990] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.445239] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 2.461577] sda: sda1 sda2
[ 2.462437] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.659429] usb 1-1.3: new high-speed USB device number 3 using ehci-pci
[ 2.776418] clocksource: Switched to clocksource tsc
[ 2.886046] random: fast init done
[ 2.892747] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 3.007785] usbcore: registered new interface driver usb-storage
[ 5.042951] random: crng init done
[ 15.152961] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[ 16.519899] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 16.610330] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[ 16.610465] systemd[1]: Detected architecture x86-64.
[ 16.702299] systemd[1]: Set hostname to <debugger>.
[ 17.860712] systemd[1]: Listening on udev Kernel Socket.
[ 17.861364] systemd[1]: Created slice User and Session Slice.
[ 17.861566] systemd[1]: Listening on Journal Socket.
[ 17.861711] systemd[1]: Reached target Remote File Systems.
[ 17.861990] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 17.862178] systemd[1]: Listening on Journal Socket (/dev/log).
[ 17.862366] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 18.885267] systemd-journald[206]: Received request to flush runtime journal from PID 1
[ 19.401401] systemd-journald[206]: File /var/log/journal/a57867dadec04938a066501a4c85b2fd/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 20.174214] wmi: Mapper loaded
[ 20.253555] ACPI: AC Adapter [AC0] (on-line)
[ 20.490682] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20170303/utaddress-247)
[ 20.490692] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.490696] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-247)
[ 20.490701] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.490703] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-247)
[ 20.490708] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.490710] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20170303/utaddress-247)
[ 20.490715] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 20.490716] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 20.491745] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 20.561261] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[ 20.561688] thermal LNXTHERM:00: registered as thermal_zone0
[ 20.561689] ACPI: Thermal Zone [THRM] (65 C)
[ 20.617884] input: PC Speaker as /devices/platform/pcspkr/input/input14
[ 20.683958] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 20.688809] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[ 20.688811] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[ 20.688811] RAPL PMU: hw unit of domain package 2^-16 Joules
[ 20.688812] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[ 20.723570] ACPI: Battery Slot [BAT0] (battery present)
[ 20.843160] iTCO_vendor_support: vendor-support=0
[ 20.920979] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 20.921035] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 20.921202] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 20.955600] asus_wmi: Asus Management GUID not found
[ 21.132400] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 21.132410] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 21.133013] r8169 0000:02:00.0 eth0: RTL8168evl/8111evl at 0xffffb07a006fd000, ec:a8:6b:1d:40:71, XID 0c900800 IRQ 28
[ 21.133016] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 21.143929] psmouse serio4: synaptics: queried max coordinates: x [..5692], y [..4680]
[ 21.151105] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC269VB: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 21.151107] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 21.151109] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[ 21.151110] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 21.151111] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 21.151113] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 21.151115] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 21.204897] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000/0xa0000/0x0, board id: 0, fw id: 582762
[ 21.243109] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input13
[ 21.296741] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops vgt_balloon_space [i915])
[ 21.435777] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[ 21.436264] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 21.436365] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 21.436466] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 21.446227] media: Linux media interface: v0.10
[ 21.517690] Linux video capture interface: v2.00
[ 21.654805] intel_rapl: Found RAPL domain package
[ 21.654809] intel_rapl: Found RAPL domain core
[ 21.654811] intel_rapl: Found RAPL domain uncore
[ 21.654821] intel_rapl: RAPL package 0 domain package locked by BIOS
[ 21.655103] uvcvideo: Found UVC 1.00 device USB HD Webcam (5986:053a)
[ 21.659967] uvcvideo 1-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[ 21.659972] uvcvideo 1-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[ 21.659975] uvcvideo 1-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[ 21.660085] input: USB HD Webcam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input19
[ 21.660166] usbcore: registered new interface driver uvcvideo
[ 21.660167] USB Video Class driver (1.1.1)
[ 21.790557] usbcore: registered new interface driver uas
[ 21.923542] rtl8192ce: Chip Version ID: B_CUT_88C
[ 21.934271] rtl8192ce: Using firmware rtlwifi/rtl8192cfwU_B.bin
[ 21.934499] ums-realtek 1-1.4:1.0: USB Mass Storage device detected
[ 21.948648] scsi host6: usb-storage 1-1.4:1.0
[ 21.948731] usbcore: registered new interface driver ums-realtek
[ 22.093012] mousedev: PS/2 mouse device common for all mice
[ 22.130638] usb 1-1.4: USB disconnect, device number 4
[ 22.305892] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 22.306163] rtlwifi: rtlwifi: wireless switch is on
[ 22.362196] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 22.530867] rtl8192ce 0000:01:00.0 wlp1s0: renamed from wlan0
[ 22.837510] Adding 6040596k swap on /dev/sda2. Priority:-1 extents:1 across:6040596k FS
[ 25.324895] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 26.908098] wlp1s0: authenticate with f8:1a:67:c7:a0:65
[ 26.940640] wlp1s0: send auth to f8:1a:67:c7:a0:65 (try 1/3)
[ 26.943269] wlp1s0: authenticated
[ 26.947179] wlp1s0: associate with f8:1a:67:c7:a0:65 (try 1/3)
[ 26.951245] wlp1s0: RX AssocResp from f8:1a:67:c7:a0:65 (capab=0x411 status=0 aid=1)
[ 26.951827] wlp1s0: associated
[ 26.951839] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 30.322225] systemd-journald[206]: File /var/log/journal/a57867dadec04938a066501a4c85b2fd/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 178.169380] snd_hda_intel 0000:00:1b.0: Unstable LPIB (131072 >= 8192); disabling LPIB delay counting
[ 1099.152395] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 1099.152401] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1099.162381] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 1099.162386] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1103.494719] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 1103.494737] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1103.504636] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 1103.504653] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1105.518406] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 1105.518410] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1105.529495] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 1105.529500] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1107.965351] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 1107.965356] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 1107.975263] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 1107.975269] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 2885.623857] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 2885.623864] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 2885.633785] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 2885.633792] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 2906.267871] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 2906.267876] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 2906.277792] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 2906.277796] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3161.454849] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 3161.454867] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3161.466206] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 3161.466224] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3162.457086] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 3162.457090] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3162.467317] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 3162.467320] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3559.034851] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 3559.034856] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3559.045253] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 3559.045260] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3569.346026] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 3569.346030] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 3569.355985] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 3569.355988] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 5176.582116] perf: interrupt took too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 79500
[ 5515.820540] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 5515.820546] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 5515.830492] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 5515.830497] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 5519.363029] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 5519.363035] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 5519.373020] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 5519.373025] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 8369.998169] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 8369.998174] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 8370.008061] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 8370.008065] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 8372.108531] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[ 8372.108536] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 8372.118444] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[ 8372.118448] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[ 8381.394714] perf: interrupt took too long (3148 > 3140), lowering kernel.perf_event_max_sample_rate to 63300
[10941.323269] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[10941.323273] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[10941.333106] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[10941.333110] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[10942.932771] atkbd serio0: Unknown key pressed (translated set 2, code 0xd8 on isa0060/serio0).
[10942.932776] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[10942.943342] atkbd serio0: Unknown key released (translated set 2, code 0xd8 on isa0060/serio0).
[10942.943347] atkbd serio0: Use 'setkeycodes e058 <keycode>' to make it known.
[11439.434134] fuse init (API version 7.26)
[12314.239992] perf: interrupt took too long (3946 > 3935), lowering kernel.perf_event_max_sample_rate to 50400
[12320.346928] modprobe: Segmentation Faultoutput of sudo modprobe fuse:
[jimmy@debugger ~]$ sudo modprobe fuse
Segmentation Faultany app using fuse also fails due to this.
Offline
#5 2017-08-13 22:20:38
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,270
Re: fuse module gives segmentation fault error
Can you
sudo insmod /lib/modules/4.12.4-1-ARCH/kernel/fs/fuse/fuse.ko.gz?
Also see loqs post about coredumpctl.
Offline
#6 2017-08-13 22:24:59
- jimmybirer
- Member
- Registered: 2017-08-13
- Posts: 4
Re: fuse module gives segmentation fault error
seth wrote:
Can you
sudo insmod /lib/modules/4.12.4-1-ARCH/kernel/fs/fuse/fuse.ko.gz?
Also see loqs post about coredumpctl.
sudo insmod /lib/modules/4.12.4-1-ARCH/kernel/fs/fuse/fuse.ko.gz
insmod: ERROR: could not insert module /lib/modules/4.12.4-1-ARCH/kernel/fs/fuse/fuse.ko.gz: Segmentation Fault[jimmy@debugger ~]$ coredumpctl
No coredumps found.Offline
#7 2017-08-13 22:28:20
- seth
- Member
- Registered: 2012-09-03
- Posts: 51,270
Re: fuse module gives segmentation fault error
pacman -Qkk linux(This checks the installation integrety for the package)
You'll have to run insmod in gdb if the above doesn't get us anywhere.
Offline
#8 2017-08-13 22:37:42
- loqs
- Member
- Registered: 2014-03-06
- Posts: 17,373
Re: fuse module gives segmentation fault error
The output of the following please
$ cat /proc/sys/kernel/core_pattern
$ systemctl --state=failed
$ mountOffline
#9 2017-08-14 02:41:31
- jimmybirer
- Member
- Registered: 2017-08-13
- Posts: 4
Re: fuse module gives segmentation fault error
[jimmy@debugger ~]$ pacman -Qkk linux
warning: linux: /usr/lib/modules/4.12.4-1-ARCH/modules.alias (Modification time mismatch)
warning: linux: /usr/lib/modules/4.12.4-1-ARCH/modules.alias.bin (Modification time mismatch)
warning: linux: /usr/lib/modules/4.12.4-1-ARCH/modules.builtin.bin (Modification time mismatch)
warning: linux: /usr/lib/modules/4.12.4-1-ARCH/modules.dep (Modification time mismatch)
warning: linux: /usr/lib/modules/4.12.4-1-ARCH/modules.dep.bin (Modification time mismatch)
warning: linux: /usr/lib/modules/4.12.4-1-ARCH/modules.devname (Modification time mismatch)
warning: linux: /usr/lib/modules/4.12.4-1-ARCH/modules.softdep (Modification time mismatch)
warning: linux: /usr/lib/modules/4.12.4-1-ARCH/modules.symbols (Modification time mismatch)
warning: linux: /usr/lib/modules/4.12.4-1-ARCH/modules.symbols.bin (Modification time mismatch)
linux: 4870 total files, 9 altered files
[jimmy@debugger ~]$ cat /proc/sys/kernel/core_pattern
|/usr/lib/systemd/systemd-coredump %P %u %g %s %t %c %e
[jimmy@debugger ~]$ systemctl --state=failed
0 loaded units listed. Pass --all to see loaded but inactive units, too.
To show all installed unit files use 'systemctl list-unit-files'.
[jimmy@debugger ~]$ mount
proc on /proc type proc (rw,nosuid,nodev,noexec,relatime)
sys on /sys type sysfs (rw,nosuid,nodev,noexec,relatime)
dev on /dev type devtmpfs (rw,nosuid,relatime,size=1935628k,nr_inodes=483907,mode=755)
run on /run type tmpfs (rw,nosuid,nodev,relatime,mode=755)
/dev/sda1 on / type ext4 (rw,relatime,data=ordered)
securityfs on /sys/kernel/security type securityfs (rw,nosuid,nodev,noexec,relatime)
tmpfs on /dev/shm type tmpfs (rw,nosuid,nodev)
devpts on /dev/pts type devpts (rw,nosuid,noexec,relatime,gid=5,mode=620,ptmxmode=000)
tmpfs on /sys/fs/cgroup type tmpfs (ro,nosuid,nodev,noexec,mode=755)
cgroup on /sys/fs/cgroup/unified type cgroup2 (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/systemd type cgroup (rw,nosuid,nodev,noexec,relatime,xattr,name=systemd)
pstore on /sys/fs/pstore type pstore (rw,nosuid,nodev,noexec,relatime)
cgroup on /sys/fs/cgroup/net_cls,net_prio type cgroup (rw,nosuid,nodev,noexec,relatime,net_cls,net_prio)
cgroup on /sys/fs/cgroup/freezer type cgroup (rw,nosuid,nodev,noexec,relatime,freezer)
cgroup on /sys/fs/cgroup/pids type cgroup (rw,nosuid,nodev,noexec,relatime,pids)
cgroup on /sys/fs/cgroup/cpu,cpuacct type cgroup (rw,nosuid,nodev,noexec,relatime,cpu,cpuacct)
cgroup on /sys/fs/cgroup/perf_event type cgroup (rw,nosuid,nodev,noexec,relatime,perf_event)
cgroup on /sys/fs/cgroup/blkio type cgroup (rw,nosuid,nodev,noexec,relatime,blkio)
cgroup on /sys/fs/cgroup/cpuset type cgroup (rw,nosuid,nodev,noexec,relatime,cpuset)
cgroup on /sys/fs/cgroup/devices type cgroup (rw,nosuid,nodev,noexec,relatime,devices)
systemd-1 on /proc/sys/fs/binfmt_misc type autofs (rw,relatime,fd=28,pgrp=1,timeout=0,minproto=5,maxproto=5,direct)
mqueue on /dev/mqueue type mqueue (rw,relatime)
configfs on /sys/kernel/config type configfs (rw,relatime)
debugfs on /sys/kernel/debug type debugfs (rw,relatime)
hugetlbfs on /dev/hugepages type hugetlbfs (rw,relatime)
tmpfs on /tmp type tmpfs (rw,nosuid,nodev)
tmpfs on /run/user/1000 type tmpfs (rw,nosuid,nodev,relatime,size=388324k,mode=700,uid=1000,gid=1000)
Offline