You are not logged in.
HI,
I keep getting this error message:
Waiting 30 seconds for device and
unable to enumerate USB device
device not accepting address (error -71)
device descriptor read (error -110 and -71)
I've been trying all day to install Arch Linux onto my new laptop (GE72MVR 7RG Apache Pro). I've been using Rufus in dd mode with arch as well as the debian and ubuntu versions of mint, manjaro and then finally downloaded the fedora media writer and tried booting fedora all with very similar output. I've tried using the kernel parameters of nomodeset noacpi and a few others that didn't help at all. I also tried using one of the older Arch isos from 11/16. I've never had a computer that I'm completely unable to boot any distribution and make no headway on for hours. I'm at a loss, what else should I be looking at or trying?
Last edited by johan1391 (2017-08-14 23:39:42)
Offline
Is secure boot disabled?
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
Yes it is
Offline
GPT/UEFI mode or legacy/MBR?
Have you tried another USB stick?
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
GPT/UEFI and no I have not but I bought it new yesterday. I also used the USB 3.0 and 2.0 port for each one to see if that would make a difference.
Last edited by johan1391 (2017-08-15 00:45:54)
Offline
Can you try boot in legacy mode just to see if it boots property?
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
How do I force it to boot using legacy mode/BIOS?
Last edited by johan1391 (2017-08-15 01:04:32)
Offline
You can change that in UEFI/BIOS. Turn off UEFI and try booting on the Arch stick again.
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
Alright I'll be back with an update.
Offline
Yes that does boot.... Wow I'm an idiot. Don't I have to install as uefi since my windows partition is? Also can I do that from legacy live USB or need to get it working in uefi mode?
Last edited by johan1391 (2017-08-15 01:17:31)
Offline
It would be easier if you could perform the install booting in EFI mode but with more work it should be possible to install it in bios mode but with the partition layout for EFI then add the NVRAM entry.
Edit:
The issue will come if the system refuses to boot the EFI bootloader/bootmanager. Also does the system have an EFI shell?
Last edited by loqs (2017-08-15 01:27:48)
Offline
Not natively that I'm aware of I do on my live USB.
Also any clue why it won't boot in UEFI mode at all?
Last edited by johan1391 (2017-08-15 01:31:06)
Offline
Buggy UEFI fw perhaps. Check if there's an BIOS/UEFI update for your laptop.
I possess a device, in my pocket, that is capable of accessing the entirety of information known to man.
I use it to look at funny pictures of cats and to argue with strangers.
Offline
If you remove/disable the device with Windows installed on it will it boot the media then in EFI mode?
Offline
This is what I've been getting all day trying to boot into UEFI mode. I've updated the BIOS firmware and that didn't fix the problem. This is what I've been getting for every distribution in some form:
https://i.lensdump.com/i/i7tTZ.jpg
How would I go about disabling the windows drive?
Last edited by johan1391 (2017-08-15 03:23:35)
Offline
Read the Code of Conduct and only post thumbnails http://wiki.archlinux.org/index.php/Cod … s_and_code
Offline
Sorry Jason it won't happen again
Offline
Is there a firmware option to disable the windrows drive or its controller?
Offline
I did try that and it still did not boot up. I've installed arch by booting in legacy mode but am a bit nervous about setting up my boot loader in a way that will actually work. So I have my windows installed on an SSD and I'm installing Linux on the HDD. Is there any thing differently I need to do since I booted in Legacy mode rather than UEFI? Do i need to get my thumb drive to boot from UEFI before I attempt doing it this way? Any other things I should check?
Offline
It will be complicated at the least to convert Arch installed for BIOS to one for UEFI with an ESP. I recommend solving the problem with installing in UEFI mode.
What is this hardware? Do you have an CD/DVD drive? If not, it would be good to try another USB drive. It seems to puke on mounting that drive. I haven't figured out why but I have a couple USB sticks that won't work to boot a linux iso but will work to hold files.
Simple and Open
Offline
BTW, I have wiped my troublesome USB sticks and put a new partition table on it and tried it with a new partition and I don't remember what else. I ended up getting another stick and moving on.
Last edited by Blasphemist (2017-08-18 15:11:01)
Simple and Open
Offline