You are not logged in.

#1 2017-09-20 20:09:44

mothbe
Member
Registered: 2017-09-20
Posts: 3

[SOLVED] i915 gpu hang error

Today after update bunch of packages and linux kernel following error occured: GPU recovery failed
This error only occurs if I run plasma5 after enter credentials to SDDM.
I do not have such issue with Awesome WM and Weston.

Did anyone have a similar issue?

dmesg output

[    0.000000] random: get_random_bytes called from start_kernel+0x42/0x4b7 with crng_init=0
[    0.000000] Linux version 4.13.2-1-zen (builduser@heftig) (gcc version 7.2.0 (GCC)) #1 ZEN SMP PREEMPT Thu Sep 14 08:48:02 UTC 2017
[    0.000000] Command line: initrd=\initramfs-linux-zen.img cryptdevice=/dev/sda4:vgcrypt:allow-discards root=/dev/mapper/vgcrypt-lv_root rw quiet acpi_backlight=vendor elevator=noop systemd.restore_state=1
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000008ad00fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ad01000-0x000000008ad48fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000008ad49000-0x000000008ad60fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ad61000-0x000000008ad8efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000008ad8f000-0x000000008ae39fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008ae3a000-0x000000008ae8efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008ae8f000-0x000000008aecbfff] usable
[    0.000000] BIOS-e820: [mem 0x000000008aecc000-0x000000008aefefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008aeff000-0x000000008afa8fff] usable
[    0.000000] BIOS-e820: [mem 0x000000008afa9000-0x000000008afdefff] reserved
[    0.000000] BIOS-e820: [mem 0x000000008afdf000-0x000000008affffff] usable
[    0.000000] BIOS-e820: [mem 0x000000008b000000-0x000000008fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffd70000-0x00000000ffd9ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x74ca5910-0x74ca5ea8] usable ==> usable
[    0.000000] e820: update [mem 0x74ca5910-0x74ca5ea8] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000bffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000074ca590f] usable
[    0.000000] reserve setup_data: [mem 0x0000000074ca5910-0x0000000074ca5ea8] usable
[    0.000000] reserve setup_data: [mem 0x0000000074ca5ea9-0x000000008ad00fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008ad01000-0x000000008ad48fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000008ad49000-0x000000008ad60fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008ad61000-0x000000008ad8efff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000008ad8f000-0x000000008ae39fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008ae3a000-0x000000008ae8efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008ae8f000-0x000000008aecbfff] usable
[    0.000000] reserve setup_data: [mem 0x000000008aecc000-0x000000008aefefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008aeff000-0x000000008afa8fff] usable
[    0.000000] reserve setup_data: [mem 0x000000008afa9000-0x000000008afdefff] reserved
[    0.000000] reserve setup_data: [mem 0x000000008afdf000-0x000000008affffff] usable
[    0.000000] reserve setup_data: [mem 0x000000008b000000-0x000000008fffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffd70000-0x00000000ffd9ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000026effffff] usable
[    0.000000] efi: EFI v1.10 by Apple
[    0.000000] efi:  ACPI=0x8ad8e000  ACPI 2.0=0x8ad8e014  SMBIOS=0x8afae000 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Apple Inc. MacBookPro12,1/Mac-E43C1C25D4880AD6, BIOS MBP121.88Z.0167.B33.1706181928 06/18/2017
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x26f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-DFFFF write-protect
[    0.000000]   E0000-FFFFF uncachable
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00A0000000 mask 7FE0000000 uncachable
[    0.000000]   2 base 0090000000 mask 7FF0000000 uncachable
[    0.000000]   3 base 008C000000 mask 7FFC000000 uncachable
[    0.000000]   4 base 008B000000 mask 7FFF000000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] e820: last_pfn = 0x8b000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff98d680099000] 99000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x254d62000, 0x254d62fff] PGTABLE
[    0.000000] BRK [0x254d63000, 0x254d63fff] PGTABLE
[    0.000000] BRK [0x254d64000, 0x254d64fff] PGTABLE
[    0.000000] BRK [0x254d65000, 0x254d65fff] PGTABLE
[    0.000000] BRK [0x254d66000, 0x254d66fff] PGTABLE
[    0.000000] BRK [0x254d67000, 0x254d67fff] PGTABLE
[    0.000000] BRK [0x254d68000, 0x254d68fff] PGTABLE
[    0.000000] BRK [0x254d69000, 0x254d69fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x72a9f000-0x735e6fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000008AD8E014 000024 (v02 APPLE )
[    0.000000] ACPI: XSDT 0x000000008AD8E1C0 00009C (v01 APPLE  Apple00  00000000      01000013)
[    0.000000] ACPI: FACP 0x000000008AD8C000 0000F4 (v05 APPLE  Apple00  00000000 Loki 0000005F)
[    0.000000] ACPI: DSDT 0x000000008AD7E000 0089FE (v03 APPLE  MacBookP 00010000 INTL 20140424)
[    0.000000] ACPI: FACS 0x000000008AD06000 000040
[    0.000000] ACPI: FACS 0x000000008AD06000 000040
[    0.000000] ACPI: HPET 0x000000008AD8B000 000038 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: APIC 0x000000008AD8A000 0000BC (v02 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: SBST 0x000000008AD88000 000030 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: ECDT 0x000000008AD87000 000053 (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: SSDT 0x000000008AD7D000 00010B (v01 APPLE  SataAhci 00001000 INTL 20140424)
[    0.000000] ACPI: SSDT 0x000000008AD7C000 000024 (v01 APPLE  SmcDppt  00001000 INTL 20140424)
[    0.000000] ACPI: SSDT 0x000000008AD7B000 000032 (v01 APPLE  SsdtS3   00001000 INTL 20140424)
[    0.000000] ACPI: SSDT 0x000000008AD78000 002B50 (v01 APPLE  PcieTbt  00001000 INTL 20140424)
[    0.000000] ACPI: SSDT 0x000000008AD6B000 0000B8 (v01 APPLE  Sdxc     00001000 INTL 20140424)
[    0.000000] ACPI: SSDT 0x000000008AD6A000 000A64 (v02 APPLE  Xhci     00001000 INTL 20140424)
[    0.000000] ACPI: SSDT 0x000000008AD63000 000618 (v01 PmRef  Cpu0Ist  00003000 INTL 20140424)
[    0.000000] ACPI: SSDT 0x000000008AD62000 000C17 (v01 CpuRef CpuSsdt  00003000 INTL 20140424)
[    0.000000] ACPI: DMAR 0x000000008AD61000 000088 (v01 APPLE  BDW      00000001 INTL 00000001)
[    0.000000] ACPI: MCFG 0x000000008AD89000 00003C (v01 APPLE  Apple00  00000001 Loki 0000005F)
[    0.000000] ACPI: DMI detected to setup _OSI("Darwin"): Apple hardware
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000026effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x26effb000-0x26effffff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000026effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000008ad00fff]
[    0.000000]   node   0: [mem 0x000000008ad49000-0x000000008ad60fff]
[    0.000000]   node   0: [mem 0x000000008ad8f000-0x000000008ae39fff]
[    0.000000]   node   0: [mem 0x000000008ae8f000-0x000000008aecbfff]
[    0.000000]   node   0: [mem 0x000000008aeff000-0x000000008afa8fff]
[    0.000000]   node   0: [mem 0x000000008afdf000-0x000000008affffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000026effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000026effffff]
[    0.000000] On node 0 totalpages: 2072170
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 8828 pages used for memmap
[    0.000000]   DMA32 zone: 564940 pages, LIFO batch:31
[    0.000000]   Normal zone: 23488 pages used for memmap
[    0.000000]   Normal zone: 1503232 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x000000008c000000-0x000000008fffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x25 (or later)
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000bffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x74ca5000-0x74ca5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x74ca5000-0x74ca5fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ad01000-0x8ad48fff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ad61000-0x8ad8efff]
[    0.000000] PM: Registered nosave memory: [mem 0x8ae3a000-0x8ae8efff]
[    0.000000] PM: Registered nosave memory: [mem 0x8aecc000-0x8aefefff]
[    0.000000] PM: Registered nosave memory: [mem 0x8afa9000-0x8afdefff]
[    0.000000] PM: Registered nosave memory: [mem 0x8b000000-0x8fffffff]
[    0.000000] PM: Registered nosave memory: [mem 0x90000000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffd6ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffd70000-0xffd9ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffda0000-0xffffffff]
[    0.000000] e820: [mem 0x90000000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff98d8eec00000 s106520 r8192 d32744 u524288
[    0.000000] pcpu-alloc: s106520 r8192 d32744 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2039768
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\initramfs-linux-zen.img cryptdevice=/dev/sda4:vgcrypt:allow-discards root=/dev/mapper/vgcrypt-lv_root rw quiet acpi_backlight=vendor elevator=noop systemd.restore_state=1
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7704836K/8288680K available (6668K kernel code, 1132K rwdata, 2044K rodata, 1336K init, 900K bss, 583844K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 28268 entries in 111 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 8448, nr_irqs: 728, preallocated irqs: 16
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.003333] tsc: Detected 2700.097 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.20 BogoMIPS (lpj=9000323)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170531
[    0.013309] ACPI: 9 ACPI AML tables successfully acquired and loaded
[    0.016043] Security Framework initialized
[    0.016043] Yama: becoming mindful.
[    0.017256] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.017867] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.017894] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.017915] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.018079] CPU: Physical Processor ID: 0
[    0.018079] CPU: Processor Core ID: 0
[    0.018083] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.018083] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.018087] mce: CPU supports 7 MCE banks
[    0.018094] CPU0: Thermal monitoring enabled (TM1)
[    0.018104] process: using mwait in idle threads
[    0.018106] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.018107] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.018177] Freeing SMP alternatives memory: 24K
[    0.026594] smpboot: Max logical packages: 2
[    0.026605] DMAR: Host address width 39
[    0.026606] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.026612] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.026612] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.026615] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.026616] DMAR: RMRR base: 0x0000008b800000 end: 0x0000008fffffff
[    0.026618] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.026618] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.026619] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.026620] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.027049] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.027050] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.027666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.063333] smpboot: CPU0: Intel(R) Core(TM) i5-5257U CPU @ 2.70GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.073355] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.073386] ... version:                3
[    0.073386] ... bit width:              48
[    0.073386] ... generic registers:      4
[    0.073387] ... value mask:             0000ffffffffffff
[    0.073387] ... max period:             00007fffffffffff
[    0.073388] ... fixed-purpose events:   3
[    0.073388] ... event mask:             000000070000000f
[    0.080008] Hierarchical SRCU implementation.
[    0.093429] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[    0.100018] smp: Bringing up secondary CPUs ...
[    0.126676] x86: Booting SMP configuration:
[    0.126677] .... node  #0, CPUs:      #1 #2 #3
[    0.430019] smp: Brought up 1 node, 4 CPUs
[    0.430019] smpboot: Total of 4 processors activated (21608.05 BogoMIPS)
[    0.433343] devtmpfs: initialized
[    0.433374] x86/mm: Memory block size: 128MB
[    0.433875] PM: Registering ACPI NVS region [mem 0x8ad01000-0x8ad48fff] (294912 bytes)
[    0.433875] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.433875] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.433875] pinctrl core: initialized pinctrl subsystem
[    0.433875] RTC time: 18:56:43, date: 09/20/17
[    0.433875] NET: Registered protocol family 16
[    0.436672] cpuidle: using governor ladder
[    0.436680] cpuidle: using governor menu
[    0.436680] PCCT header not found.
[    0.436719] ACPI: bus type PCI registered
[    0.436720] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.436769] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
[    0.436776] PCI: not using MMCONFIG
[    0.436776] PCI: Using configuration type 1 for base access
[    0.437255] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.437255] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.437255] ACPI: Disabled all _OSI OS vendors
[    0.437255] ACPI: Added _OSI(Module Device)
[    0.437255] ACPI: Added _OSI(Processor Device)
[    0.437255] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.437255] ACPI: Added _OSI(Processor Aggregator Device)
[    0.437255] ACPI: Added _OSI(Darwin)
[    0.437255] ACPI: EC: EC started
[    0.437255] ACPI: EC: interrupt blocked
[    0.440288] ACPI: \: Used as first EC
[    0.440289] ACPI: \: GPE=0x4e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.440290] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.442218] ACPI: BIOS _OSI(Darwin) query honored via DMI
[    0.444555] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.444690] ACPI Error: Needed type [Reference], found [Integer] ffff98d8e4866750 (20170531/exresop-103)
[    0.444697] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20170531/dswexec-461)
[    0.444702] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20170531/psparse-550)
[    0.444930] ACPI: Dynamic OEM Table Load:
[    0.444936] ACPI: SSDT 0xFFFF98D8E4EEF000 00067C (v01 PmRef  ApIst    00003000 INTL 20140424)
[    0.445277] ACPI: Dynamic OEM Table Load:
[    0.445281] ACPI: SSDT 0xFFFF98D8E4804A00 000119 (v01 PmRef  ApCst    00003000 INTL 20140424)
[    0.445904] ACPI: Interpreter enabled
[    0.445928] ACPI: (supports S0 S3 S4 S5)
[    0.445929] ACPI: Using IOAPIC for interrupt routing
[    0.445947] PCI: MMCONFIG for domain 0000 [bus 00-9b] at [mem 0xe0000000-0xe9bfffff] (base 0xe0000000)
[    0.446318] PCI: MMCONFIG at [mem 0xe0000000-0xe9bfffff] reserved in ACPI motherboard resources
[    0.446326] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.453832] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.453835] acpi PNP0A08:00: _OSC: OS assumes control of [PCIeHotplug SHPCHotplug AER PCIeCapability]
[    0.453850] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-9b] only partially covers this bridge
[    0.454037] PCI host bridge to bus 0000:00
[    0.454039] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.454040] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.454041] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.454042] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff window]
[    0.454043] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff window]
[    0.454044] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff window]
[    0.454044] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff window]
[    0.454045] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[    0.454046] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[    0.454047] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[    0.454048] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[    0.454049] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff window]
[    0.454049] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff window]
[    0.454050] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff window]
[    0.454051] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff window]
[    0.454052] pci_bus 0000:00: root bus resource [mem 0x000f0000-0x000fffff window]
[    0.454053] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfeafffff window]
[    0.454054] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff window]
[    0.454055] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.454061] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.454134] pci 0000:00:02.0: [8086:162b] type 00 class 0x030000
[    0.454144] pci 0000:00:02.0: reg 0x10: [mem 0xc0000000-0xc0ffffff 64bit]
[    0.454166] pci 0000:00:02.0: reg 0x18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.454170] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.454237] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.454246] pci 0000:00:03.0: reg 0x10: [mem 0xc1810000-0xc1813fff 64bit]
[    0.454333] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.454350] pci 0000:00:14.0: reg 0x10: [mem 0xc1800000-0xc180ffff 64bit]
[    0.454400] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.454479] pci 0000:00:15.0: [8086:9ce0] type 00 class 0x080102
[    0.454497] pci 0000:00:15.0: reg 0x10: [mem 0xc181a000-0xc181afff]
[    0.454609] pci 0000:00:15.4: [8086:9ce6] type 00 class 0x0c8000
[    0.454627] pci 0000:00:15.4: reg 0x10: [mem 0xc1819000-0xc1819fff]
[    0.454744] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.454761] pci 0000:00:16.0: reg 0x10: [mem 0xc181b100-0xc181b11f 64bit]
[    0.454813] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.454867] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.454884] pci 0000:00:1b.0: reg 0x10: [mem 0xc1814000-0xc1817fff 64bit]
[    0.454933] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.454981] pci 0000:00:1c.0: [8086:9c90] type 01 class 0x060400
[    0.455044] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.455059] pci 0000:00:1c.0: Enabling MPC IRBNCE
[    0.455060] pci 0000:00:1c.0: Intel PCH root port ACS workaround enabled
[    0.455115] pci 0000:00:1c.1: [8086:9c92] type 01 class 0x060400
[    0.455182] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.455196] pci 0000:00:1c.1: Enabling MPC IRBNCE
[    0.455198] pci 0000:00:1c.1: Intel PCH root port ACS workaround enabled
[    0.455251] pci 0000:00:1c.2: [8086:9c94] type 01 class 0x060400
[    0.455317] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.455331] pci 0000:00:1c.2: Enabling MPC IRBNCE
[    0.455333] pci 0000:00:1c.2: Intel PCH root port ACS workaround enabled
[    0.455387] pci 0000:00:1c.4: [8086:9c98] type 01 class 0x060400
[    0.455446] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.455459] pci 0000:00:1c.4: Enabling MPC IRBNCE
[    0.455460] pci 0000:00:1c.4: Intel PCH root port ACS workaround enabled
[    0.455513] pci 0000:00:1c.5: [8086:9c9a] type 01 class 0x060400
[    0.455579] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.455592] pci 0000:00:1c.5: Enabling MPC IRBNCE
[    0.455594] pci 0000:00:1c.5: Intel PCH root port ACS workaround enabled
[    0.455653] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.455803] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.455818] pci 0000:00:1f.3: reg 0x10: [mem 0xc181b000-0xc181b0ff 64bit]
[    0.455834] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.455899] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.455931] pci 0000:00:1f.6: reg 0x10: [mem 0xc1818000-0xc1818fff 64bit]
[    0.456095] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.456153] pci 0000:02:00.0: [14e4:1570] type 00 class 0x048000
[    0.456184] pci 0000:02:00.0: reg 0x10: [mem 0xc1700000-0xc170ffff 64bit]
[    0.456198] pci 0000:02:00.0: reg 0x18: [mem 0xa0000000-0xafffffff 64bit pref]
[    0.456212] pci 0000:02:00.0: reg 0x20: [mem 0xc1600000-0xc16fffff 64bit]
[    0.456294] pci 0000:02:00.0: supports D1
[    0.456294] pci 0000:02:00.0: PME# supported from D0 D3hot
[    0.463358] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.463362] pci 0000:00:1c.1:   bridge window [mem 0xc1600000-0xc17fffff]
[    0.463366] pci 0000:00:1c.1:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.463449] pci 0000:03:00.0: [14e4:43ba] type 00 class 0x028000
[    0.463510] pci 0000:03:00.0: reg 0x10: [mem 0xc1400000-0xc1407fff 64bit]
[    0.463535] pci 0000:03:00.0: reg 0x18: [mem 0xc1000000-0xc13fffff 64bit]
[    0.463726] pci 0000:03:00.0: supports D1 D2
[    0.463727] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.473393] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.473397] pci 0000:00:1c.2:   bridge window [mem 0xc1000000-0xc14fffff]
[    0.473452] pci 0000:05:00.0: [8086:156d] type 01 class 0x060400
[    0.473571] pci 0000:05:00.0: supports D1 D2
[    0.473571] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.483352] pci 0000:00:1c.4: PCI bridge to [bus 05-9b]
[    0.483355] pci 0000:00:1c.4:   bridge window [io  0x4000-0x6fff]
[    0.483357] pci 0000:00:1c.4:   bridge window [mem 0xc1900000-0xcd9fffff]
[    0.483361] pci 0000:00:1c.4:   bridge window [mem 0xcda00000-0xd99fffff 64bit pref]
[    0.483471] pci 0000:06:00.0: [8086:156d] type 01 class 0x060400
[    0.483595] pci 0000:06:00.0: supports D1 D2
[    0.483596] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.483681] pci 0000:06:03.0: [8086:156d] type 01 class 0x060400
[    0.483806] pci 0000:06:03.0: supports D1 D2
[    0.483807] pci 0000:06:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.483889] pci 0000:06:04.0: [8086:156d] type 01 class 0x060400
[    0.484015] pci 0000:06:04.0: supports D1 D2
[    0.484016] pci 0000:06:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.484098] pci 0000:06:05.0: [8086:156d] type 01 class 0x060400
[    0.484220] pci 0000:06:05.0: supports D1 D2
[    0.484221] pci 0000:06:05.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.484305] pci 0000:06:06.0: [8086:156d] type 01 class 0x060400
[    0.484428] pci 0000:06:06.0: supports D1 D2
[    0.484429] pci 0000:06:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.484531] pci 0000:05:00.0: PCI bridge to [bus 06-6b]
[    0.484537] pci 0000:05:00.0:   bridge window [io  0x4000-0x5fff]
[    0.484540] pci 0000:05:00.0:   bridge window [mem 0xc1900000-0xc99fffff]
[    0.484545] pci 0000:05:00.0:   bridge window [mem 0xcda00000-0xd59fffff 64bit pref]
[    0.484610] pci 0000:07:00.0: [8086:156c] type 00 class 0x088000
[    0.484645] pci 0000:07:00.0: reg 0x10: [mem 0xc1900000-0xc193ffff]
[    0.484657] pci 0000:07:00.0: reg 0x14: [mem 0xc1940000-0xc1940fff]
[    0.484813] pci 0000:07:00.0: supports D1 D2
[    0.484813] pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.493362] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.493370] pci 0000:06:00.0:   bridge window [mem 0xc1900000-0xc19fffff]
[    0.493438] pci 0000:06:03.0: PCI bridge to [bus 08-38]
[    0.493443] pci 0000:06:03.0:   bridge window [io  0x4000-0x4fff]
[    0.493447] pci 0000:06:03.0:   bridge window [mem 0xc1a00000-0xc59fffff]
[    0.493453] pci 0000:06:03.0:   bridge window [mem 0xcda00000-0xd19fffff 64bit pref]
[    0.493512] pci 0000:06:04.0: PCI bridge to [bus 39]
[    0.493581] pci 0000:06:05.0: PCI bridge to [bus 3a-6a]
[    0.493587] pci 0000:06:05.0:   bridge window [io  0x5000-0x5fff]
[    0.493590] pci 0000:06:05.0:   bridge window [mem 0xc5a00000-0xc99fffff]
[    0.493596] pci 0000:06:05.0:   bridge window [mem 0xd1a00000-0xd59fffff 64bit pref]
[    0.493637] pci 0000:06:06.0: PCI bridge to [bus 6b]
[    0.493858] pci 0000:04:00.0: [144d:a801] type 00 class 0x010601
[    0.493918] pci 0000:04:00.0: reg 0x24: [mem 0xc1500000-0xc1501fff]
[    0.503473] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.503477] pci 0000:00:1c.5:   bridge window [mem 0xc1500000-0xc15fffff]
[    0.504266] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.504302] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.504336] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.504369] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.504402] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.504436] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.504469] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[    0.504502] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[    0.504647] ACPI: Enabled 4 GPEs in block 00 to 7F
[    0.504662] ACPI: EC: EC stopped
[    0.504662] ACPI: EC: EC started
[    0.504662] ACPI: EC: interrupt blocked
[    0.504662] pci 0000:07:00.0: BAR 0: assigned [mem 0xc1900000-0xc193ffff]
[    0.504662] pci 0000:07:00.0: BAR 1: assigned [mem 0xc1940000-0xc1940fff]
[    0.504662] ACPI: EC: interrupt unblocked
[    0.504662] ACPI: EC: event unblocked
[    0.504662] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x4e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.504662] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot ECDT EC to handle transactions and events
[    0.504662] ACPI: \_SB_.PCI0.LPCB.EC__: GPE=0x4e, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.504662] ACPI: \_SB_.PCI0.LPCB.EC__: Used as boot DSDT EC to handle transactions and events
[    0.504662] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.504662] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.504662] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.504662] vgaarb: loaded
[    0.504662] EDAC MC: Ver: 3.0.0
[    0.504662] Registered efivars operations
[    0.624721] PCI: Using ACPI for IRQ routing
[    0.630049] PCI: pci_cache_line_size set to 64 bytes
[    0.630271] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.630272] e820: reserve RAM buffer [mem 0x74ca5910-0x77ffffff]
[    0.630273] e820: reserve RAM buffer [mem 0x8ad01000-0x8bffffff]
[    0.630274] e820: reserve RAM buffer [mem 0x8ad61000-0x8bffffff]
[    0.630276] e820: reserve RAM buffer [mem 0x8ae3a000-0x8bffffff]
[    0.630277] e820: reserve RAM buffer [mem 0x8aecc000-0x8bffffff]
[    0.630278] e820: reserve RAM buffer [mem 0x8afa9000-0x8bffffff]
[    0.630278] e820: reserve RAM buffer [mem 0x8b000000-0x8bffffff]
[    0.630279] e820: reserve RAM buffer [mem 0x26f000000-0x26fffffff]
[    0.630341] NetLabel: Initializing
[    0.630342] NetLabel:  domain hash size = 128
[    0.630342] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.630355] NetLabel:  unlabeled traffic allowed by default
[    0.630365] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.630365] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.632052] clocksource: Switched to clocksource hpet
[    0.637056] VFS: Disk quotas dquot_6.6.0
[    0.637073] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.637138] pnp: PnP ACPI init
[    0.637291] system 00:00: [mem 0xfed00000-0xfed03fff] has been reserved
[    0.637294] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[    0.637332] system 00:01: [io  0xffff] has been reserved
[    0.637333] system 00:01: [io  0x1800-0x187f] has been reserved
[    0.637335] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.637337] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.637352] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.637940] system 00:03: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.637942] system 00:03: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.637943] system 00:03: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.637944] system 00:03: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.637945] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.637946] system 00:03: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.637947] system 00:03: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.637948] system 00:03: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.637950] system 00:03: [mem 0xff000000-0xffffffff] could not be reserved
[    0.637951] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[    0.637953] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.637996] system 00:04: [mem 0x20000000-0x201fffff] could not be reserved
[    0.637997] system 00:04: [mem 0x40000000-0x401fffff] could not be reserved
[    0.637999] system 00:04: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.638089] pnp: PnP ACPI: found 5 devices
[    0.639298] pci 0000:00:02.0: assigning 4 device properties
[    0.639360] pci 0000:07:00.0: assigning 8 device properties
[    0.639401] pci 0000:00:1b.0: assigning 4 device properties
[    0.643918] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.643948] pci 0000:06:00.0: bridge window [io  0x1000-0x0fff] to [bus 07] add_size 1000
[    0.643949] pci 0000:06:00.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 200000 add_align 100000
[    0.643965] pci 0000:06:04.0: bridge window [io  0x1000-0x0fff] to [bus 39] add_size 1000
[    0.643966] pci 0000:06:04.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 39] add_size 200000 add_align 100000
[    0.643968] pci 0000:06:04.0: bridge window [mem 0x00100000-0x000fffff] to [bus 39] add_size 200000 add_align 100000
[    0.643983] pci 0000:06:06.0: bridge window [io  0x1000-0x0fff] to [bus 6b] add_size 1000
[    0.643984] pci 0000:06:06.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 6b] add_size 200000 add_align 100000
[    0.643985] pci 0000:06:06.0: bridge window [mem 0x00100000-0x000fffff] to [bus 6b] add_size 200000 add_align 100000
[    0.644006] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.644016] pci 0000:00:1c.1: PCI bridge to [bus 02]
[    0.644019] pci 0000:00:1c.1:   bridge window [mem 0xc1600000-0xc17fffff]
[    0.644022] pci 0000:00:1c.1:   bridge window [mem 0xa0000000-0xafffffff 64bit pref]
[    0.644026] pci 0000:00:1c.2: PCI bridge to [bus 03]
[    0.644030] pci 0000:00:1c.2:   bridge window [mem 0xc1000000-0xc14fffff]
[    0.644040] pci 0000:06:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.644041] pci 0000:06:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.644043] pci 0000:06:04.0: BAR 14: no space for [mem size 0x00200000]
[    0.644044] pci 0000:06:04.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.644046] pci 0000:06:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.644047] pci 0000:06:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.644048] pci 0000:06:06.0: BAR 14: no space for [mem size 0x00200000]
[    0.644049] pci 0000:06:06.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.644050] pci 0000:06:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.644051] pci 0000:06:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.644052] pci 0000:06:00.0: BAR 13: no space for [io  size 0x1000]
[    0.644053] pci 0000:06:00.0: BAR 13: failed to assign [io  size 0x1000]
[    0.644056] pci 0000:06:04.0: BAR 13: no space for [io  size 0x1000]
[    0.644057] pci 0000:06:04.0: BAR 13: failed to assign [io  size 0x1000]
[    0.644058] pci 0000:06:06.0: BAR 13: no space for [io  size 0x1000]
[    0.644058] pci 0000:06:06.0: BAR 13: failed to assign [io  size 0x1000]
[    0.644061] pci 0000:06:06.0: BAR 14: no space for [mem size 0x00200000]
[    0.644061] pci 0000:06:06.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.644063] pci 0000:06:06.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.644064] pci 0000:06:06.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.644065] pci 0000:06:06.0: BAR 13: no space for [io  size 0x1000]
[    0.644066] pci 0000:06:06.0: BAR 13: failed to assign [io  size 0x1000]
[    0.644067] pci 0000:06:04.0: BAR 14: no space for [mem size 0x00200000]
[    0.644068] pci 0000:06:04.0: BAR 14: failed to assign [mem size 0x00200000]
[    0.644070] pci 0000:06:04.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.644071] pci 0000:06:04.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.644072] pci 0000:06:04.0: BAR 13: no space for [io  size 0x1000]
[    0.644073] pci 0000:06:04.0: BAR 13: failed to assign [io  size 0x1000]
[    0.644075] pci 0000:06:00.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
[    0.644076] pci 0000:06:00.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
[    0.644077] pci 0000:06:00.0: BAR 13: no space for [io  size 0x1000]
[    0.644077] pci 0000:06:00.0: BAR 13: failed to assign [io  size 0x1000]
[    0.644079] pci 0000:06:00.0: PCI bridge to [bus 07]
[    0.644084] pci 0000:06:00.0:   bridge window [mem 0xc1900000-0xc19fffff]
[    0.644092] pci 0000:06:03.0: PCI bridge to [bus 08-38]
[    0.644094] pci 0000:06:03.0:   bridge window [io  0x4000-0x4fff]
[    0.644099] pci 0000:06:03.0:   bridge window [mem 0xc1a00000-0xc59fffff]
[    0.644102] pci 0000:06:03.0:   bridge window [mem 0xcda00000-0xd19fffff 64bit pref]
[    0.644108] pci 0000:06:04.0: PCI bridge to [bus 39]
[    0.644121] pci 0000:06:05.0: PCI bridge to [bus 3a-6a]
[    0.644122] pci 0000:06:05.0:   bridge window [io  0x5000-0x5fff]
[    0.644127] pci 0000:06:05.0:   bridge window [mem 0xc5a00000-0xc99fffff]
[    0.644130] pci 0000:06:05.0:   bridge window [mem 0xd1a00000-0xd59fffff 64bit pref]
[    0.644136] pci 0000:06:06.0: PCI bridge to [bus 6b]
[    0.644148] pci 0000:05:00.0: PCI bridge to [bus 06-6b]
[    0.644150] pci 0000:05:00.0:   bridge window [io  0x4000-0x5fff]
[    0.644155] pci 0000:05:00.0:   bridge window [mem 0xc1900000-0xc99fffff]
[    0.644158] pci 0000:05:00.0:   bridge window [mem 0xcda00000-0xd59fffff 64bit pref]
[    0.644164] pci 0000:00:1c.4: PCI bridge to [bus 05-9b]
[    0.644165] pci 0000:00:1c.4:   bridge window [io  0x4000-0x6fff]
[    0.644169] pci 0000:00:1c.4:   bridge window [mem 0xc1900000-0xcd9fffff]
[    0.644171] pci 0000:00:1c.4:   bridge window [mem 0xcda00000-0xd99fffff 64bit pref]
[    0.644175] pci 0000:00:1c.5: PCI bridge to [bus 04]
[    0.644178] pci 0000:00:1c.5:   bridge window [mem 0xc1500000-0xc15fffff]
[    0.644185] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.644186] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.644187] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.644188] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff window]
[    0.644189] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff window]
[    0.644190] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff window]
[    0.644191] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff window]
[    0.644192] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff window]
[    0.644193] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff window]
[    0.644193] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff window]
[    0.644194] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff window]
[    0.644195] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff window]
[    0.644196] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff window]
[    0.644197] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff window]
[    0.644198] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff window]
[    0.644199] pci_bus 0000:00: resource 19 [mem 0x000f0000-0x000fffff window]
[    0.644200] pci_bus 0000:00: resource 20 [mem 0x90000000-0xfeafffff window]
[    0.644200] pci_bus 0000:00: resource 21 [mem 0xfed40000-0xfed44fff window]
[    0.644202] pci_bus 0000:02: resource 1 [mem 0xc1600000-0xc17fffff]
[    0.644203] pci_bus 0000:02: resource 2 [mem 0xa0000000-0xafffffff 64bit pref]
[    0.644204] pci_bus 0000:03: resource 1 [mem 0xc1000000-0xc14fffff]
[    0.644205] pci_bus 0000:05: resource 0 [io  0x4000-0x6fff]
[    0.644205] pci_bus 0000:05: resource 1 [mem 0xc1900000-0xcd9fffff]
[    0.644206] pci_bus 0000:05: resource 2 [mem 0xcda00000-0xd99fffff 64bit pref]
[    0.644207] pci_bus 0000:06: resource 0 [io  0x4000-0x5fff]
[    0.644208] pci_bus 0000:06: resource 1 [mem 0xc1900000-0xc99fffff]
[    0.644209] pci_bus 0000:06: resource 2 [mem 0xcda00000-0xd59fffff 64bit pref]
[    0.644210] pci_bus 0000:07: resource 1 [mem 0xc1900000-0xc19fffff]
[    0.644211] pci_bus 0000:08: resource 0 [io  0x4000-0x4fff]
[    0.644212] pci_bus 0000:08: resource 1 [mem 0xc1a00000-0xc59fffff]
[    0.644212] pci_bus 0000:08: resource 2 [mem 0xcda00000-0xd19fffff 64bit pref]
[    0.644213] pci_bus 0000:3a: resource 0 [io  0x5000-0x5fff]
[    0.644214] pci_bus 0000:3a: resource 1 [mem 0xc5a00000-0xc99fffff]
[    0.644215] pci_bus 0000:3a: resource 2 [mem 0xd1a00000-0xd59fffff 64bit pref]
[    0.644216] pci_bus 0000:04: resource 1 [mem 0xc1500000-0xc15fffff]
[    0.644312] NET: Registered protocol family 2
[    0.644430] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.644518] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.644627] TCP: Hash tables configured (established 65536 bind 65536)
[    0.644655] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.644674] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.644720] NET: Registered protocol family 1
[    0.644729] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.645068] PCI: CLS 256 bytes, default 64
[    0.645097] Unpacking initramfs...
[    1.728057] Freeing initrd memory: 11552K
[    1.728705] DMAR: No ATSR found
[    1.729090] DMAR: dmar0: Using Queued invalidation
[    1.729096] DMAR: dmar1: Using Queued invalidation
[    1.729121] DMAR: Setting RMRR:
[    1.729153] DMAR: Setting identity map for device 0000:00:02.0 [0x8b800000 - 0x8fffffff]
[    1.729165] DMAR: Prepare 0-16MiB unity mapping for LPC
[    1.729191] DMAR: Setting identity map for device 0000:00:1f.0 [0x0 - 0xffffff]
[    1.729205] DMAR: Intel(R) Virtualization Technology for Directed I/O
[    1.729249] iommu: Adding device 0000:00:00.0 to group 0
[    1.729256] iommu: Adding device 0000:00:02.0 to group 1
[    1.729263] iommu: Adding device 0000:00:03.0 to group 2
[    1.729270] iommu: Adding device 0000:00:14.0 to group 3
[    1.729284] iommu: Adding device 0000:00:15.0 to group 4
[    1.729290] iommu: Adding device 0000:00:15.4 to group 4
[    1.729301] iommu: Adding device 0000:00:16.0 to group 5
[    1.729308] iommu: Adding device 0000:00:1b.0 to group 6
[    1.729315] iommu: Adding device 0000:00:1c.0 to group 7
[    1.729322] iommu: Adding device 0000:00:1c.1 to group 8
[    1.729330] iommu: Adding device 0000:00:1c.2 to group 9
[    1.729337] iommu: Adding device 0000:00:1c.4 to group 10
[    1.729344] iommu: Adding device 0000:00:1c.5 to group 11
[    1.729360] iommu: Adding device 0000:00:1f.0 to group 12
[    1.729367] iommu: Adding device 0000:00:1f.3 to group 12
[    1.729375] iommu: Adding device 0000:00:1f.6 to group 12
[    1.729383] iommu: Adding device 0000:02:00.0 to group 13
[    1.729390] iommu: Adding device 0000:03:00.0 to group 14
[    1.729397] iommu: Adding device 0000:05:00.0 to group 15
[    1.729405] iommu: Adding device 0000:06:00.0 to group 16
[    1.729412] iommu: Adding device 0000:06:03.0 to group 17
[    1.729420] iommu: Adding device 0000:06:04.0 to group 18
[    1.729427] iommu: Adding device 0000:06:05.0 to group 19
[    1.729435] iommu: Adding device 0000:06:06.0 to group 20
[    1.729444] iommu: Adding device 0000:07:00.0 to group 16
[    1.729451] iommu: Adding device 0000:04:00.0 to group 21
[    1.730852] Scanning for low memory corruption every 60 seconds
[    1.731277] Initialise system trusted keyrings
[    1.731283] Key type blacklist registered
[    1.731319] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[    1.732116] zbud: loaded
[    1.732538] Key type asymmetric registered
[    1.732559] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.732582] io scheduler noop registered (default)
[    1.732582] io scheduler deadline registered
[    1.732600] io scheduler cfq registered
[    1.732601] io scheduler mq-deadline registered
[    1.732601] io scheduler kyber registered
[    1.732618] io scheduler bfq registered
[    1.732634] io scheduler bfq-sq registered
[    1.732635] BFQ I/O-scheduler: v8r12 (with cgroups support)
[    1.734089] pciehp 0000:06:00.0:pcie204: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.734125] pciehp 0000:06:03.0:pcie204: Slot #3 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.734152] pciehp 0000:06:04.0:pcie204: Slot #4 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.734176] pciehp 0000:06:05.0:pcie204: Slot #5 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.734203] pciehp 0000:06:06.0:pcie204: Slot #6 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.734233] efifb: probing for efifb
[    1.734245] efifb: framebuffer at 0xb0000000, using 16000k, total 16000k
[    1.734246] efifb: mode is 2560x1600x32, linelength=10240, pages=1
[    1.734246] efifb: scrolling: redraw
[    1.734247] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.741375] Console: switching to colour frame buffer device 320x100
[    1.748421] fb0: EFI VGA frame buffer device
[    1.748426] intel_idle: MWAIT substates: 0x11142120
[    1.748427] intel_idle: v0.4.1 model 0x3D
[    1.748563] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.748708] GHES: HEST is not enabled!
[    1.748897] dw_dmac_pci 0000:00:15.0: DesignWare DMA Controller, 8 channels
[    1.748934] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.749273] Linux agpgart interface v0.103
[    1.749482] rtc_cmos 00:02: RTC can wake from S4
[    1.749593] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.749618] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.749627] intel_pstate: Intel P-state driver initializing
[    1.749800] ledtrig-cpu: registered to indicate activity on CPUs
[    1.749857] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    1.750376] NET: Registered protocol family 10
[    1.758844] Segment Routing with IPv6
[    1.758894] NET: Registered protocol family 17
[    1.759678] RAS: Correctable Errors collector initialized.
[    1.759747] microcode: sig=0x306d4, pf=0x40, revision=0x21
[    1.759902] microcode: Microcode Update Driver: v2.2.
[    1.759929] sched_clock: Marking stable (1759891027, 0)->(1864008935, -104117908)
[    1.760417] registered taskstats version 1
[    1.760432] Loading compiled-in X.509 certificates
[    1.760468] zswap: loaded using pool lzo/zbud
[    1.761878]   Magic number: 1:323:949
[    1.761896] tty tty6: hash matches
[    1.761927] memory memory2: hash matches
[    1.761969] rtc_cmos 00:02: setting system clock to 2017-09-20 18:56:44 UTC (1505933804)
[    1.762596] PM: Hibernation image not present or could not be loaded.
[    1.763658] Freeing unused kernel memory: 1336K
[    1.763659] Write protecting the kernel read-only data: 10240k
[    1.764026] Freeing unused kernel memory: 1512K
[    1.764069] Freeing unused kernel memory: 4K
[    2.047997] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    2.048722] ACPI: Lid Switch [LID0]
[    2.048769] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    2.048776] ACPI: Power Button [PWRB]
[    2.048803] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    2.048809] ACPI: Sleep Button [SLPB]
[    2.048835] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    2.048851] ACPI: Power Button [PWRF]
[    2.055473] Setting dangerous option enable_rc6 - tainting kernel
[    2.055475] Setting dangerous option enable_fbc - tainting kernel
[    2.055477] i915: unknown parameter 'lvds_downclock' ignored
[    2.055918] [drm] Memory usable by graphics device = 4096M
[    2.055919] [drm] VT-d active for gfx access
[    2.055921] checking generic (b0000000 fa0000) vs hw (b0000000 10000000)
[    2.055921] fb: switching to inteldrmfb from EFI VGA
[    2.055940] Console: switching to colour dummy device 80x25
[    2.056021] [drm] Replacing VGA console driver
[    2.060030] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.060031] [drm] Driver supports precise vblank timestamp query.
[    2.060293] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.066572] [drm] Initialized i915 1.6.0 20170619 for 0000:00:02.0 on minor 0
[    2.067176] ACPI: Video Device [IGPU] (multi-head: yes  rom: no  post: no)
[    2.067396] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[    2.083747] fbcon: inteldrmfb (fb0) is primary device
[    2.746762] tsc: Refined TSC clocksource calibration: 2699.999 MHz
[    2.746772] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26eb3d7f706, max_idle_ns: 440795268188 ns
[    3.453939] Console: switching to colour frame buffer device 320x100
[    3.484041] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.541870] ACPI: bus type USB registered
[    3.541890] usbcore: registered new interface driver usbfs
[    3.541897] usbcore: registered new interface driver hub
[    3.541929] usbcore: registered new device driver usb
[    3.543091] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.543098] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    3.544237] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0004b810
[    3.544242] xhci_hcd 0000:00:14.0: cache line size of 256 is not supported
[    3.544372] SCSI subsystem initialized
[    3.544465] hub 1-0:1.0: USB hub found
[    3.544477] hub 1-0:1.0: 11 ports detected
[    3.544820] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    3.544825] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    3.544974] hub 2-0:1.0: USB hub found
[    3.544982] hub 2-0:1.0: 4 ports detected
[    3.545037] usb: port power management may be unreliable
[    3.545620] libata version 3.00 loaded.
[    3.546229] ahci 0000:04:00.0: version 3.0
[    3.547333] AVX2 version of gcm_enc/dec engaged.
[    3.547334] AES CTR mode by8 optimization enabled
[    3.577070] ahci 0000:04:00.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    3.577073] ahci 0000:04:00.0: flags: 64bit ncq led clo only pio ccc 
[    3.577491] scsi host0: ahci
[    3.577603] ata1: SATA max UDMA/133 abar m8192@0xc1500000 port 0xc1500100 irq 50
[    3.760313] clocksource: Switched to clocksource tsc
[    3.863488] usb 1-3: new full-speed USB device number 2 using xhci_hcd
[    3.913573] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    3.915112] ata1.00: unexpected _GTF length (8)
[    3.915254] ata1.00: ATA-8: APPLE SSD SM0256G, BXW1JA0Q, max UDMA/133
[    3.915258] ata1.00: 490234752 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    3.915743] ata1.00: unexpected _GTF length (8)
[    3.915906] ata1.00: configured for UDMA/133
[    3.916291] scsi 0:0:0:0: Direct-Access     ATA      APPLE SSD SM0256 JA0Q PQ: 0 ANSI: 5
[    3.953352] sd 0:0:0:0: [sda] 490234752 512-byte logical blocks: (251 GB/234 GiB)
[    3.953360] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    3.953398] sd 0:0:0:0: [sda] Write Protect is off
[    3.953403] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.953481] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.956094]  sda: sda1 sda2 sda3 sda4
[    3.956852] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.997187] device-mapper: uevent: version 1.0.3
[    3.997251] device-mapper: ioctl: 4.36.0-ioctl (2017-06-09) initialised: dm-devel@redhat.com
[    4.000189] hidraw: raw HID events driver (C) Jiri Kosina
[    4.005452] usbcore: registered new interface driver usbhid
[    4.005453] usbhid: USB HID core driver
[    4.005907] input: Broadcom Corp. Bluetooth USB Host Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:05AC:8290.0001/input/input5
[    4.060224] hid-generic 0003:05AC:8290.0001: input,hidraw0: USB HID v1.11 Keyboard [Broadcom Corp. Bluetooth USB Host Controller] on usb-0000:00:14.0-3/input0
[    4.060504] input: Broadcom Corp. Bluetooth USB Host Controller as /devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:05AC:8290.0002/input/input6
[    4.060650] hid-generic 0003:05AC:8290.0002: input,hidraw1: USB HID v1.11 Mouse [Broadcom Corp. Bluetooth USB Host Controller] on usb-0000:00:14.0-3/input1
[    4.110486] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[    4.135689] usb-storage 2-3:1.0: USB Mass Storage device detected
[    4.135931] scsi host1: usb-storage 2-3:1.0
[    4.136082] usbcore: registered new interface driver usb-storage
[    4.136897] usbcore: registered new interface driver uas
[    4.296764] usb 1-5: new full-speed USB device number 3 using xhci_hcd
[    4.439195] apple 0003:05AC:0273.0003: hiddev0,hidraw2: USB HID v1.10 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input0
[    4.439561] input: Apple Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:05AC:0273.0004/input/input7
[    4.493681] apple 0003:05AC:0273.0004: input,hiddev1,hidraw3: USB HID v1.10 Keyboard [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input1
[    4.493915] apple 0003:05AC:0273.0005: hiddev2,hidraw4: USB HID v1.10 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input3
[    4.494089] apple 0003:05AC:0273.0006: hiddev3,hidraw5: USB HID v1.10 Device [Apple Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:14.0-5/input4
[    5.148925] scsi 1:0:0:0: Direct-Access     APPLE    SD Card Reader   3.00 PQ: 0 ANSI: 6
[    5.150774] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[   61.794162] NET: Registered protocol family 38
[   61.928566] EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
[   61.983439] random: crng init done
[   61.999452] ip_tables: (C) 2000-2006 Netfilter Core Team
[   62.003822] systemd[1]: systemd 234 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[   62.003961] systemd[1]: Detected architecture x86-64.
[   62.005238] systemd[1]: Set hostname to <darkstar>.
[   62.084269] systemd[1]: Created slice User and Session Slice.
[   62.084309] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   62.084316] systemd[1]: Reached target Login Prompts.
[   62.084347] systemd[1]: Listening on LVM2 metadata daemon socket.
[   62.084364] systemd[1]: Listening on udev Control Socket.
[   62.084379] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   62.084406] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[   62.099206] EXT4-fs (dm-2): re-mounted. Opts: data=ordered
[   62.140112] systemd-journald[304]: Received request to flush runtime journal from PID 1
[   62.211453] ACPI: AC Adapter [ADP1] (off-line)
[   62.232681] ACPI: SBS HC: EC = 0xffff98d8e4831600, offset = 0x20, query_bit = 0x10
[   62.257069] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   62.259559] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   62.262144] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[   62.262170] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[   62.269405] thunderbolt 0000:07:00.0: NHI initialized, starting thunderbolt
[   62.269410] thunderbolt 0000:07:00.0: allocating TX ring 0 of size 10
[   62.269472] thunderbolt 0000:07:00.0: allocating RX ring 0 of size 10
[   62.269485] thunderbolt 0000:07:00.0: control channel created
[   62.269486] thunderbolt 0000:07:00.0: control channel starting...
[   62.269487] thunderbolt 0000:07:00.0: starting TX ring 0
[   62.269495] thunderbolt 0000:07:00.0: enabling interrupt at register 0x38200 bit 0 (0x0 -> 0x1)
[   62.269496] thunderbolt 0000:07:00.0: starting RX ring 0
[   62.269503] thunderbolt 0000:07:00.0: enabling interrupt at register 0x38200 bit 12 (0x1 -> 0x1001)
[   62.269558] thunderbolt 0000:07:00.0: current switch config:
[   62.269560] thunderbolt 0000:07:00.0:  Switch: 8086:156d (Revision: 0, TB Version: 2)
[   62.269561] thunderbolt 0000:07:00.0:   Max Port Number: 12
[   62.269562] thunderbolt 0000:07:00.0:   Config:
[   62.269563] thunderbolt 0000:07:00.0:    Upstream Port Number: 5 Depth: 0 Route String: 0x0 Enabled: 1, PlugEventsDelay: 255ms
[   62.269565] thunderbolt 0000:07:00.0:    unknown1: 0x0 unknown4: 0x0
[   62.269621] thunderbolt 0000:07:00.0: initializing Switch at 0x0 (depth: 0, up port: 5)
[   62.272472] thunderbolt 0000:07:00.0: 0: uid: 0x10013011e9da0
[   62.272617] thunderbolt 0000:07:00.0:  Port 0: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[   62.272618] thunderbolt 0000:07:00.0:   Max hop id (in/out): 7/7
[   62.272619] thunderbolt 0000:07:00.0:   Max counters: 8
[   62.272619] thunderbolt 0000:07:00.0:   NFC Credits: 0x700000
[   62.272670] thunderbolt 0000:07:00.0:  Port 1: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[   62.272671] thunderbolt 0000:07:00.0:   Max hop id (in/out): 15/15
[   62.272672] thunderbolt 0000:07:00.0:   Max counters: 16
[   62.272672] thunderbolt 0000:07:00.0:   NFC Credits: 0x3c00000
[   62.272723] thunderbolt 0000:07:00.0:  Port 2: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[   62.272724] thunderbolt 0000:07:00.0:   Max hop id (in/out): 15/15
[   62.272725] thunderbolt 0000:07:00.0:   Max counters: 16
[   62.272725] thunderbolt 0000:07:00.0:   NFC Credits: 0x3c00000
[   62.272782] thunderbolt 0000:07:00.0:  Port 3: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[   62.272783] thunderbolt 0000:07:00.0:   Max hop id (in/out): 15/15
[   62.272783] thunderbolt 0000:07:00.0:   Max counters: 16
[   62.272784] thunderbolt 0000:07:00.0:   NFC Credits: 0x3c00000
[   62.272835] thunderbolt 0000:07:00.0:  Port 4: 8086:156d (Revision: 0, TB Version: 1, Type: Port (0x1))
[   62.272836] thunderbolt 0000:07:00.0:   Max hop id (in/out): 15/15
[   62.272836] thunderbolt 0000:07:00.0:   Max counters: 16
[   62.272837] thunderbolt 0000:07:00.0:   NFC Credits: 0x3c00000
[   62.272851] thunderbolt 0000:07:00.0:  Port 5: 8086:156d (Revision: 0, TB Version: 1, Type: NHI (0x2))
[   62.272852] thunderbolt 0000:07:00.0:   Max hop id (in/out): 11/11
[   62.272852] thunderbolt 0000:07:00.0:   Max counters: 16
[   62.272853] thunderbolt 0000:07:00.0:   NFC Credits: 0xf00000
[   62.272882] thunderbolt 0000:07:00.0:  Port 6: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[   62.272885] thunderbolt 0000:07:00.0:   Max hop id (in/out): 8/8
[   62.272886] thunderbolt 0000:07:00.0:   Max counters: 2
[   62.272887] thunderbolt 0000:07:00.0:   NFC Credits: 0x700000
[   62.272903] thunderbolt 0000:07:00.0:  Port 7: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[   62.274743] thunderbolt 0000:07:00.0:   Max hop id (in/out): 8/8
[   62.274745] thunderbolt 0000:07:00.0:   Max counters: 2
[   62.274746] thunderbolt 0000:07:00.0:   NFC Credits: 0x700000
[   62.274775] thunderbolt 0000:07:00.0:  Port 8: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[   62.274795] thunderbolt 0000:07:00.0:   Max hop id (in/out): 8/8
[   62.274796] thunderbolt 0000:07:00.0:   Max counters: 2
[   62.274797] thunderbolt 0000:07:00.0:   NFC Credits: 0x700000
[   62.274833] thunderbolt 0000:07:00.0:  Port 9: 8086:156d (Revision: 0, TB Version: 1, Type: PCIe (0x100101))
[   62.274834] thunderbolt 0000:07:00.0:   Max hop id (in/out): 8/8
[   62.274835] thunderbolt 0000:07:00.0:   Max counters: 2
[   62.274836] thunderbolt 0000:07:00.0:   NFC Credits: 0x700000
[   62.274837] thunderbolt 0000:07:00.0: 0:a: disabled by eeprom
[   62.274870] thunderbolt 0000:07:00.0:  Port 11: 8086:156d (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[   62.274871] thunderbolt 0000:07:00.0:   Max hop id (in/out): 9/9
[   62.274872] thunderbolt 0000:07:00.0:   Max counters: 2
[   62.274873] thunderbolt 0000:07:00.0:   NFC Credits: 0xf00000
[   62.274890] thunderbolt 0000:07:00.0:  Port 12: 8086:156d (Revision: 0, TB Version: 1, Type: DP/HDMI (0xe0101))
[   62.274891] thunderbolt 0000:07:00.0:   Max hop id (in/out): 9/9
[   62.274892] thunderbolt 0000:07:00.0:   Max counters: 2
[   62.274893] thunderbolt 0000:07:00.0:   NFC Credits: 0xf00000
[   62.274933] thunderbolt 0000:07:00.0: 0:1: is unplugged (state: 7)
[   62.274945] thunderbolt 0000:07:00.0: 0:3: is unplugged (state: 7)
[   62.278145] input: PC Speaker as /devices/platform/pcspkr/input/input8
[   62.286364] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[   62.286366] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[   62.286367] RAPL PMU: hw unit of domain package 2^-14 Joules
[   62.286368] RAPL PMU: hw unit of domain dram 2^-14 Joules
[   62.286368] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[   62.286488] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops vgt_balloon_space [i915])
[   62.305348] snd_hda_codec_hdmi: unknown parameter 'index' ignored
[   62.305609] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4208: line_outs=2 (0x12/0x13/0x0/0x0/0x0) type:speaker
[   62.305621] snd_hda_codec_cirrus hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   62.305622] snd_hda_codec_cirrus hdaudioC0D0:    hp_outs=1 (0x10/0x0/0x0/0x0/0x0)
[   62.305623] snd_hda_codec_cirrus hdaudioC0D0:    mono: mono_out=0x0
[   62.305624] snd_hda_codec_cirrus hdaudioC0D0:    dig-out=0x21/0x0
[   62.305625] snd_hda_codec_cirrus hdaudioC0D0:    inputs:
[   62.305626] snd_hda_codec_cirrus hdaudioC0D0:      Internal Mic=0x1c
[   62.305627] snd_hda_codec_cirrus hdaudioC0D0:      Mic=0x18
[   62.311454] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card1/input9
[   62.311506] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card1/input10
[   62.311553] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card1/input11
[   62.311598] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card1/input12
[   62.311643] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card1/input13
[   62.316050] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[   62.316104] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
[   62.316153] input: HDA Intel PCH SPDIF as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[   62.347961] usbcore: registered new interface driver brcmfmac
[   62.361796] intel_rapl: Found RAPL domain package
[   62.361798] intel_rapl: Found RAPL domain core
[   62.361798] intel_rapl: Found RAPL domain uncore
[   62.361799] intel_rapl: Found RAPL domain dram
[   62.389142] Adding 8388604k swap on /dev/mapper/vgcrypt-lv_swap.  Priority:-1 extents:1 across:8388604k SSFS
[   62.401110] iTCO_vendor_support: vendor-support=0
[   62.401660] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   62.401695] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
[   62.429299] applesmc: key=670 fan=1 temp=35 index=34 acc=0 lux=2 kbd=1
[   62.430152] applesmc applesmc.768: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   62.461216] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   62.461239] ACPI: Smart Battery System [SBS0]: Battery Slot [BAT0] (battery present)
[   62.462182] brcmfmac 0000:03:00.0: Direct firmware load for brcm/brcmfmac43602-pcie.txt failed with error -2
[   62.475902] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
[   62.529130] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   62.537003] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   62.794714] EXT4-fs (dm-2): re-mounted. Opts: data=ordered,commit=600
[   62.839420] EXT4-fs (dm-3): re-mounted. Opts: data=ordered,commit=600
[   62.993866] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Nov 10 2015 06:38:10 version 7.35.177.61 (r598657) FWID 01-ea662a8c
[   63.046737] brcmfmac 0000:03:00.0 wlp3s0: renamed from wlan0
[   63.063751] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   63.106904] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   63.628416] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   63.658174] Ebtables v2.0 registered
[   63.713189] brcmfmac: brcmf_p2p_create_p2pdev: set p2p_disc error
[   63.713194] brcmfmac: brcmf_cfg80211_add_iface: add iface p2p-dev-wlp3s0 type 10 failed: err=-16
[   63.716390] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   64.919044] EXT4-fs (dm-2): re-mounted. Opts: data=ordered,commit=600
[   64.947708] EXT4-fs (dm-3): re-mounted. Opts: data=ordered,commit=600
[   67.923260] Bluetooth: Core ver 2.22
[   67.923663] NET: Registered protocol family 31
[   67.923664] Bluetooth: HCI device and connection manager initialized
[   67.923668] Bluetooth: HCI socket layer initialized
[   67.923670] Bluetooth: L2CAP socket layer initialized
[   67.923675] Bluetooth: SCO socket layer initialized
[   67.938734] usbcore: registered new interface driver btusb
[   68.018762] mousedev: PS/2 mouse device common for all mice
[   68.055622] Bluetooth: hci0: BCM: chip id 102 build 0695
[   68.056611] Bluetooth: hci0: BCM: product 05ac:8290
[   68.057629] Bluetooth: hci0: BCM: features 0x2f
[   68.073606] Bluetooth: hci0: BCM20703A1 Generic USB UHE Apple 20Mhz fcbga_X87
[   68.098259] EXT4-fs (dm-2): re-mounted. Opts: data=ordered,commit=600
[   68.126591] EXT4-fs (dm-3): re-mounted. Opts: data=ordered,commit=600
[   71.097867] EXT4-fs (dm-2): re-mounted. Opts: data=ordered,commit=600
[   71.125286] EXT4-fs (dm-3): re-mounted. Opts: data=ordered,commit=600
[   73.947143] input: bcm5974 as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input17
[   73.947835] usbcore: registered new interface driver bcm5974
[   74.254583] bcm5974: bad trackpad package, length: 8
[   74.308589] bcm5974: bad trackpad package, length: 12
[   74.388102] EXT4-fs (dm-2): re-mounted. Opts: data=ordered,commit=600
[   74.416754] EXT4-fs (dm-3): re-mounted. Opts: data=ordered,commit=600
[   77.513138] EXT4-fs (dm-2): re-mounted. Opts: data=ordered,commit=600
[   77.540781] EXT4-fs (dm-3): re-mounted. Opts: data=ordered,commit=600
[   94.962231] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   94.971983] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   95.498857] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   96.631835] DMAR: DRHD: handling fault status reg 2
[   96.631843] DMAR: [DMA Write] Request device [00:02.0] fault addr 1fa0000 [fault reason 23] Unknown
[  102.456425] [drm] GPU HANG: ecode 8:1:0x4c9206c8, in Xorg [18789], reason: Hang on bcs0, action: reset
[  102.456427] [drm] GPU hangs can indicate a bug anywhere in the entire gfx stack, including userspace.
[  102.456427] [drm] Please file a _new_ bug report on bugs.freedesktop.org against DRI -> DRM/Intel
[  102.456428] [drm] drm/i915 developers can then reassign to the right component if it's not a kernel issue.
[  102.456428] [drm] The gpu crash dump is required to analyze gpu hangs, so please always attach it.
[  102.456429] [drm] GPU crash dump saved to /sys/class/drm/card0/error
[  102.456480] drm/i915: Resetting chip after gpu hang
[  102.457536] DMAR: DRHD: handling fault status reg 2
[  102.457541] DMAR: [DMA Write] Request device [00:02.0] fault addr 1fa4000 [fault reason 23] Unknown
[  108.426691] drm/i915: Resetting chip after gpu hang
[  108.427321] DMAR: DRHD: handling fault status reg 3
[  108.427327] DMAR: [DMA Write] Request device [00:02.0] fault addr fffdc000 [fault reason 23] Unknown
[  116.533353] drm/i915: Resetting chip after gpu hang
[  122.506700] drm/i915: Resetting chip after gpu hang
[  122.506809] [drm:i915_reset [i915]] *ERROR* GPU recovery failed

Kernel parameters:

title Arch_Linux_Zen
linux /vmlinuz-linux-zen
initrd /initramfs-linux-zen.img
options cryptdevice=/dev/sda4:vgcrypt:allow-discards root=/dev/mapper/vgcrypt-lv_root rw quiet acpi_backlight=vendor elevator=noop systemd.restore_state=1

lspci -vv

00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
	Subsystem: Apple Inc. Device 013f
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: bdw_uncore

00:02.0 VGA compatible controller: Intel Corporation Iris Graphics 6100 (rev 09) (prog-if 00 [VGA controller])
	Subsystem: Apple Inc. Device 013f
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 48
	Region 0: Memory at c0000000 (64-bit, non-prefetchable) [size=16M]
	Region 2: Memory at b0000000 (64-bit, prefetchable) [size=256M]
	Region 4: I/O ports at 3000 [size=64]
	[virtual] Expansion ROM at 000c0000 [disabled] [size=128K]
	Capabilities: <access denied>
	Kernel driver in use: i915
	Kernel modules: i915

00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
	Subsystem: Apple Inc. Device 013f
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 69
	Region 0: Memory at c1810000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03) (prog-if 30 [XHCI])
	Subsystem: Intel Corporation Device 7270
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 49
	Region 0: Memory at c1800000 (64-bit, non-prefetchable) [size=64K]
	Capabilities: <access denied>
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci

00:15.0 DMA controller: Intel Corporation Wildcat Point-LP Serial IO DMA Controller (rev 03) (prog-if 02 [EISA DMA])
	Subsystem: Intel Corporation Wildcat Point-LP Serial IO DMA Controller
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin B routed to IRQ 20
	Region 0: Memory at c181a000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: dw_dmac_pci

00:15.4 Serial bus controller [0c80]: Intel Corporation Wildcat Point-LP Serial IO GSPI Controller #1 (rev 03)
	Subsystem: Intel Corporation Wildcat Point-LP Serial IO GSPI Controller #1
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin C routed to IRQ 0
	Region 0: Memory at c1819000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>

00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
	Subsystem: Intel Corporation Device 7270
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin A routed to IRQ 67
	Region 0: Memory at c181b100 (64-bit, non-prefetchable) [size=32]
	Capabilities: <access denied>
	Kernel driver in use: mei_me
	Kernel modules: mei_me

00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
	Subsystem: Intel Corporation Device 7270
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 64, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 68
	Region 0: Memory at c1814000 (64-bit, non-prefetchable) [size=16K]
	Capabilities: <access denied>
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #1 (rev e3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
	I/O behind bridge: 0000f000-00000fff [empty]
	Memory behind bridge: fff00000-000fffff [empty]
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #2 (rev e3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin B routed to IRQ 17
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
	I/O behind bridge: 0000f000-00000fff [empty]
	Memory behind bridge: c1600000-c17fffff [size=2M]
	Prefetchable memory behind bridge: 00000000a0000000-00000000afffffff [size=256M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin C routed to IRQ 18
	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
	I/O behind bridge: 0000f000-00000fff [empty]
	Memory behind bridge: c1000000-c14fffff [size=5M]
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.4 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 16
	Bus: primary=00, secondary=05, subordinate=9b, sec-latency=0
	I/O behind bridge: 00004000-00006fff [size=12K]
	Memory behind bridge: c1900000-cd9fffff [size=193M]
	Prefetchable memory behind bridge: 00000000cda00000-00000000d99fffff [size=192M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1c.5 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #6 (rev e3) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin B routed to IRQ 17
	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
	I/O behind bridge: 0000f000-00000fff [empty]
	Memory behind bridge: c1500000-c15fffff [size=1M]
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
	Subsystem: Intel Corporation Device 7270
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Capabilities: <access denied>
	Kernel driver in use: lpc_ich
	Kernel modules: lpc_ich

00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
	Subsystem: Intel Corporation Device 7270
	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at c181b000 (64-bit, non-prefetchable) [size=256]
	Region 4: I/O ports at efa0 [size=32]
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801

00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
	Subsystem: Intel Corporation Device 7270
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0
	Interrupt: pin C routed to IRQ 18
	Region 0: Memory at c1818000 (64-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal

02:00.0 Multimedia controller: Broadcom Limited 720p FaceTime HD Camera
	Subsystem: Broadcom Limited 720p FaceTime HD Camera
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 0
	Region 0: Memory at c1700000 (64-bit, non-prefetchable) [size=64K]
	Region 2: Memory at a0000000 (64-bit, prefetchable) [size=256M]
	Region 4: Memory at c1600000 (64-bit, non-prefetchable) [size=1M]
	Capabilities: <access denied>

03:00.0 Network controller: Broadcom Limited BCM43602 802.11ac Wireless LAN SoC (rev 01)
	Subsystem: Apple Inc. Device 0133
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 70
	Region 0: Memory at c1400000 (64-bit, non-prefetchable) [size=32K]
	Region 2: Memory at c1000000 (64-bit, non-prefetchable) [size=4M]
	Capabilities: <access denied>
	Kernel driver in use: brcmfmac
	Kernel modules: brcmfmac

04:00.0 SATA controller: Samsung Electronics Co Ltd Device a801 (rev 01) (prog-if 01 [AHCI 1.0])
	Subsystem: Samsung Electronics Co Ltd Device a801
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort+ <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 50
	Region 5: Memory at c1500000 (32-bit, non-prefetchable) [size=8K]
	Capabilities: <access denied>
	Kernel driver in use: ahci
	Kernel modules: ahci

05:00.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 42
	Bus: primary=05, secondary=06, subordinate=6b, sec-latency=0
	I/O behind bridge: 00004000-00005fff [size=8K]
	Memory behind bridge: c1900000-c99fffff [size=129M]
	Prefetchable memory behind bridge: 00000000cda00000-00000000d59fffff [size=128M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

06:00.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 43
	Bus: primary=06, secondary=07, subordinate=07, sec-latency=0
	I/O behind bridge: 0000f000-00000fff [empty]
	Memory behind bridge: c1900000-c19fffff [size=1M]
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

06:03.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
	Physical Slot: 2
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 44
	Bus: primary=06, secondary=08, subordinate=38, sec-latency=0
	I/O behind bridge: 00004000-00004fff [size=4K]
	Memory behind bridge: c1a00000-c59fffff [size=64M]
	Prefetchable memory behind bridge: 00000000cda00000-00000000d19fffff [size=64M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

06:04.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
	Physical Slot: 3
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 45
	Bus: primary=06, secondary=39, subordinate=39, sec-latency=0
	I/O behind bridge: 0000f000-00000fff [empty]
	Memory behind bridge: fff00000-000fffff [empty]
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

06:05.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
	Physical Slot: 4
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 46
	Bus: primary=06, secondary=3a, subordinate=6a, sec-latency=0
	I/O behind bridge: 00005000-00005fff [size=4K]
	Memory behind bridge: c5a00000-c99fffff [size=64M]
	Prefetchable memory behind bridge: 00000000d1a00000-00000000d59fffff [size=64M]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

06:06.0 PCI bridge: Intel Corporation DSL5520 Thunderbolt 2 Bridge [Falcon Ridge 4C 2013] (prog-if 00 [Normal decode])
	Physical Slot: 5
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 47
	Bus: primary=06, secondary=6b, subordinate=6b, sec-latency=0
	I/O behind bridge: 0000f000-00000fff [empty]
	Memory behind bridge: fff00000-000fffff [empty]
	Prefetchable memory behind bridge: 00000000fff00000-00000000000fffff [empty]
	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
	Capabilities: <access denied>
	Kernel driver in use: pcieport
	Kernel modules: shpchp

07:00.0 System peripheral: Intel Corporation DSL5520 Thunderbolt 2 NHI [Falcon Ridge 4C 2013]
	Physical Slot: 0
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0, Cache Line Size: 256 bytes
	Interrupt: pin A routed to IRQ 16
	Region 0: Memory at c1900000 (32-bit, non-prefetchable) [size=256K]
	Region 1: Memory at c1940000 (32-bit, non-prefetchable) [size=4K]
	Capabilities: <access denied>
	Kernel driver in use: thunderbolt
	Kernel modules: thunderbolt

Xorg.0.log

[    95.984] (--) Log file renamed from "/var/log/Xorg.pid-18789.log" to "/var/log/Xorg.0.log"
[    95.984] 
X.Org X Server 1.19.3
Release Date: 2017-03-15
[    95.984] X Protocol Version 11, Revision 0
[    95.984] Build Operating System: Linux 4.12.5-1-ARCH x86_64 
[    95.984] Current Operating System: Linux darkstar 4.13.2-1-zen #1 ZEN SMP PREEMPT Thu Sep 14 08:48:02 UTC 2017 x86_64
[    95.984] Kernel command line: initrd=\initramfs-linux-zen.img cryptdevice=/dev/sda4:vgcrypt:allow-discards root=/dev/mapper/vgcrypt-lv_root rw quiet acpi_backlight=vendor elevator=noop systemd.restore_state=1
[    95.984] Build Date: 13 August 2017  09:37:50PM
[    95.984]  
[    95.984] Current version of pixman: 0.34.0
[    95.984] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    95.984] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    95.984] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Sep 20 20:58:18 2017
[    95.984] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    95.984] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    95.984] (==) No Layout section.  Using the first Screen section.
[    95.984] (==) No screen section available. Using defaults.
[    95.984] (**) |-->Screen "Default Screen Section" (0)
[    95.984] (**) |   |-->Monitor "<default monitor>"
[    95.985] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[    95.985] (**) |   |-->Device "Intel Graphics"
[    95.985] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    95.985] (==) Automatically adding devices
[    95.985] (==) Automatically enabling devices
[    95.985] (==) Automatically adding GPU devices
[    95.985] (==) Automatically binding GPU devices
[    95.985] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    95.985] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/,
	/usr/share/fonts/100dpi/,
	/usr/share/fonts/75dpi/
[    95.985] (==) ModulePath set to "/usr/lib/xorg/modules"
[    95.985] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    95.985] (II) Loader magic: 0x55a1f25e5d40
[    95.985] (II) Module ABI versions:
[    95.985] 	X.Org ANSI C Emulation: 0.4
[    95.985] 	X.Org Video Driver: 23.0
[    95.985] 	X.Org XInput driver : 24.1
[    95.985] 	X.Org Server Extension : 10.0
[    95.985] (++) using VT number 1

[    95.985] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[    95.986] (II) xfree86: Adding drm device (/dev/dri/card0)
[    95.999] (--) PCI:*(0:0:2:0) 8086:162b:106b:013f rev 9, Mem @ 0xc0000000/16777216, 0xb0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[    95.999] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    95.999] (II) LoadModule: "glx"
[    95.999] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    96.000] (II) Module glx: vendor="X.Org Foundation"
[    96.000] 	compiled for 1.19.3, module version = 1.0.0
[    96.000] 	ABI class: X.Org Server Extension, version 10.0
[    96.000] (II) LoadModule: "intel"
[    96.000] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    96.000] (II) Module intel: vendor="X.Org Foundation"
[    96.000] 	compiled for 1.19.3, module version = 2.99.917
[    96.000] 	Module class: X.Org Video Driver
[    96.000] 	ABI class: X.Org Video Driver, version 23.0
[    96.000] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    96.001] (II) intel: Driver for Intel(R) HD Graphics
[    96.001] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[    96.001] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[    96.001] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    96.001] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    96.001] (==) intel(0): RGB weight 888
[    96.001] (==) intel(0): Default visual is TrueColor
[    96.001] (**) intel(0): Option "AccelMethod" "uxa"
[    96.001] (**) intel(0): Option "Backlight" "intel_backlight"
[    96.001] (--) intel(0): Integrated Graphics Chipset: Intel(R) Iris Graphics 6100
[    96.001] (**) intel(0): Relaxed fencing enabled
[    96.001] (**) intel(0): Wait on SwapBuffers? enabled
[    96.001] (**) intel(0): Triple buffering? enabled
[    96.001] (**) intel(0): Framebuffer tiled
[    96.001] (**) intel(0): Pixmaps tiled
[    96.001] (**) intel(0): 3D buffers tiled
[    96.001] (**) intel(0): SwapBuffers wait enabled
[    96.001] (==) intel(0): video overlay key set to 0x101fe
[    96.002] (II) intel(0): Output eDP1 has no monitor section
[    96.002] (**) intel(0): found backlight control interface intel_backlight
[    96.002] (II) intel(0): Output DP1 has no monitor section
[    96.010] (II) intel(0): Output HDMI1 has no monitor section
[    96.010] (II) intel(0): Output DP2 has no monitor section
[    96.016] (II) intel(0): Output HDMI2 has no monitor section
[    96.017] (II) intel(0): EDID for output eDP1
[    96.017] (II) intel(0): Manufacturer: APP  Model: a029  Serial#: 0
[    96.017] (II) intel(0): Year: 2013  Week: 50
[    96.017] (II) intel(0): EDID Version: 1.4
[    96.017] (II) intel(0): Digital Display Input
[    96.017] (II) intel(0): 8 bits per channel
[    96.017] (II) intel(0): Digital interface is DisplayPort
[    96.017] (II) intel(0): Max Image Size [cm]: horiz.: 29  vert.: 18
[    96.017] (II) intel(0): Gamma: 2.20
[    96.017] (II) intel(0): No DPMS capabilities specified
[    96.017] (II) intel(0): Supported color encodings: RGB 4:4:4 
[    96.017] (II) intel(0): First detailed timing is preferred mode
[    96.017] (II) intel(0): Preferred mode is native pixel format and refresh rate
[    96.017] (II) intel(0): redX: 0.653 redY: 0.334   greenX: 0.300 greenY: 0.620
[    96.017] (II) intel(0): blueX: 0.146 blueY: 0.050   whiteX: 0.312 whiteY: 0.329
[    96.017] (II) intel(0): Manufacturer's mask: 0
[    96.017] (II) intel(0): Supported detailed timing:
[    96.017] (II) intel(0): clock: 268.5 MHz   Image Size:  286 x 179 mm
[    96.017] (II) intel(0): h_active: 2560  h_sync: 2608  h_sync_end 2640 h_blank_end 2720 h_border: 0
[    96.017] (II) intel(0): v_active: 1600  v_sync: 1603  v_sync_end 1609 v_blanking: 1646 v_border: 0
[    96.017] (II) intel(0): Monitor name: Color LCD
[    96.017] (II) intel(0): EDID (in hex):
[    96.017] (II) intel(0): 	00ffffffffffff00061029a000000000
[    96.017] (II) intel(0): 	32170104a51d1278026fb1a7554c9e25
[    96.017] (II) intel(0): 	0c505400000001010101010101010101
[    96.017] (II) intel(0): 	010101010101e26800a0a0402e603020
[    96.017] (II) intel(0): 	36001eb31000001a000000fc00436f6c
[    96.017] (II) intel(0): 	6f72204c43440a202020000000100000
[    96.017] (II) intel(0): 	00000000000000000000000000000010
[    96.017] (II) intel(0): 	0000000000000000000000000000004f
[    96.017] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[    96.017] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[    96.017] (II) intel(0): Printing probed modes for output eDP1
[    96.017] (II) intel(0): Modeline "2560x1600"x60.0  268.50  2560 2608 2640 2720  1600 1603 1609 1646 +hsync -vsync (98.7 kHz eP)
[    96.017] (II) intel(0): Modeline "2048x1536"x60.0  266.95  2048 2200 2424 2800  1536 1537 1540 1589 -hsync +vsync (95.3 kHz d)
[    96.017] (II) intel(0): Modeline "1920x1440"x60.0  234.00  1920 2048 2256 2600  1440 1441 1444 1500 -hsync +vsync (90.0 kHz d)
[    96.017] (II) intel(0): Modeline "1856x1392"x60.0  218.30  1856 1952 2176 2528  1392 1393 1396 1439 -hsync +vsync (86.4 kHz d)
[    96.017] (II) intel(0): Modeline "1792x1344"x60.0  204.80  1792 1920 2120 2448  1344 1345 1348 1394 -hsync +vsync (83.7 kHz d)
[    96.017] (II) intel(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz d)
[    96.017] (II) intel(0): Modeline "1400x1050"x60.0  122.00  1400 1488 1640 1880  1050 1052 1064 1082 +hsync +vsync (64.9 kHz d)
[    96.017] (II) intel(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz d)
[    96.018] (II) intel(0): Modeline "1280x960"x60.0  108.00  1280 1376 1488 1800  960 961 964 1000 +hsync +vsync (60.0 kHz d)
[    96.018] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz d)
[    96.018] (II) intel(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz d)
[    96.018] (II) intel(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz d)
[    96.018] (II) intel(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz d)
[    96.018] (II) intel(0): EDID for output DP1
[    96.025] (II) intel(0): EDID for output HDMI1
[    96.025] (II) intel(0): EDID for output DP2
[    96.032] (II) intel(0): EDID for output HDMI2
[    96.032] (II) intel(0): Output eDP1 connected
[    96.032] (II) intel(0): Output DP1 disconnected
[    96.032] (II) intel(0): Output HDMI1 disconnected
[    96.032] (II) intel(0): Output DP2 disconnected
[    96.032] (II) intel(0): Output HDMI2 disconnected
[    96.032] (II) intel(0): Using exact sizes for initial modes
[    96.032] (II) intel(0): Output eDP1 using initial mode 2560x1600 +0+0
[    96.032] (II) intel(0): Kernel page flipping support detected, enabling
[    96.032] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[    96.032] (==) intel(0): DPI set to (96, 96)
[    96.032] (II) Loading sub module "fb"
[    96.032] (II) LoadModule: "fb"
[    96.032] (II) Loading /usr/lib/xorg/modules/libfb.so
[    96.032] (II) Module fb: vendor="X.Org Foundation"
[    96.032] 	compiled for 1.19.3, module version = 1.0.0
[    96.032] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    96.032] (II) Loading sub module "dri2"
[    96.032] (II) LoadModule: "dri2"
[    96.032] (II) Module "dri2" already built-in
[    96.032] (II) Loading sub module "dri3"
[    96.032] (II) LoadModule: "dri3"
[    96.032] (II) Module "dri3" already built-in
[    96.032] (==) Depth 24 pixmap format is 32 bpp
[    96.032] (II) intel(0): Allocated new frame buffer 2560x1600 stride 10240, tiled
[    96.032] (II) UXA(0): Driver registered support for the following operations:
[    96.032] (II)         solid
[    96.032] (II)         copy
[    96.032] (II)         put_image
[    96.032] (II)         get_image
[    96.032] (II) intel(0): [DRI2] Setup complete
[    96.032] (II) intel(0): [DRI2]   DRI driver: i965
[    96.032] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    96.032] (==) intel(0): Backing store enabled
[    96.032] (==) intel(0): Silken mouse enabled
[    96.032] (II) intel(0): Initializing HW Cursor
[    96.032] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    96.032] (==) intel(0): DPMS enabled
[    96.032] (==) intel(0): Intel XvMC decoder enabled
[    96.032] (WW) intel(0): Disabling Xv because no adaptors could be initialized.
[    96.032] (II) intel(0): DRI2: Enabled
[    96.032] (II) intel(0): DRI3: Enabled
[    96.032] (==) intel(0): hotplug detection: "enabled"
[    96.064] (--) RandR disabled
[    96.072] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    96.072] (II) AIGLX: enabled GLX_ARB_create_context
[    96.072] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    96.072] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[    96.072] (II) AIGLX: enabled GLX_INTEL_swap_event
[    96.072] (II) AIGLX: enabled GLX_SGI_swap_control
[    96.072] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    96.072] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    96.072] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[    96.072] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    96.072] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    96.072] (II) AIGLX: Loaded and initialized i965
[    96.072] (II) GLX: Initialized DRI2 GL provider for screen 0
[    96.072] (II) intel(0): Setting screen physical size to 677 x 423
[    96.125] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[    96.125] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    96.125] (II) LoadModule: "libinput"
[    96.125] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    96.126] (II) Module libinput: vendor="X.Org Foundation"
[    96.127] 	compiled for 1.19.3, module version = 0.26.0
[    96.127] 	Module class: X.Org XInput Driver
[    96.127] 	ABI class: X.Org XInput driver, version 24.1
[    96.127] (II) Using input driver 'libinput' for 'Power Button'
[    96.127] (**) Power Button: always reports core events
[    96.127] (**) Option "Device" "/dev/input/event3"
[    96.127] (**) Option "_source" "server/udev"
[    96.127] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    96.127] (II) event3  - (II) Power Button: (II) device is a keyboard
[    96.127] (II) event3  - (II) Power Button: (II) device removed
[    96.163] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[    96.163] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    96.164] (II) event3  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    96.164] (II) event3  - (II) Power Button: (II) device is a keyboard
[    96.164] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[    96.164] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[    96.164] (II) Using input driver 'libinput' for 'Video Bus'
[    96.164] (**) Video Bus: always reports core events
[    96.164] (**) Option "Device" "/dev/input/event4"
[    96.164] (**) Option "_source" "server/udev"
[    96.165] (II) event4  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    96.165] (II) event4  - (II) Video Bus: (II) device is a keyboard
[    96.165] (II) event4  - (II) Video Bus: (II) device removed
[    96.213] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4/event4"
[    96.213] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    96.214] (II) event4  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[    96.214] (II) event4  - (II) Video Bus: (II) device is a keyboard
[    96.214] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    96.214] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    96.214] (II) Using input driver 'libinput' for 'Power Button'
[    96.214] (**) Power Button: always reports core events
[    96.214] (**) Option "Device" "/dev/input/event1"
[    96.214] (**) Option "_source" "server/udev"
[    96.215] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    96.215] (II) event1  - (II) Power Button: (II) device is a keyboard
[    96.215] (II) event1  - (II) Power Button: (II) device removed
[    96.230] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    96.230] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[    96.230] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[    96.230] (II) event1  - (II) Power Button: (II) device is a keyboard
[    96.231] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[    96.231] (II) No input driver specified, ignoring this device.
[    96.231] (II) This device may have been added with another device file.
[    96.231] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[    96.231] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    96.231] (II) Using input driver 'libinput' for 'Sleep Button'
[    96.231] (**) Sleep Button: always reports core events
[    96.231] (**) Option "Device" "/dev/input/event2"
[    96.231] (**) Option "_source" "server/udev"
[    96.231] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    96.231] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[    96.231] (II) event2  - (II) Sleep Button: (II) device removed
[    96.260] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2/event2"
[    96.260] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[    96.260] (II) event2  - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[    96.260] (II) event2  - (II) Sleep Button: (II) device is a keyboard
[    96.261] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event10)
[    96.261] (II) No input driver specified, ignoring this device.
[    96.261] (II) This device may have been added with another device file.
[    96.261] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event11)
[    96.261] (II) No input driver specified, ignoring this device.
[    96.261] (II) This device may have been added with another device file.
[    96.262] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event12)
[    96.262] (II) No input driver specified, ignoring this device.
[    96.262] (II) This device may have been added with another device file.
[    96.262] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event13)
[    96.262] (II) No input driver specified, ignoring this device.
[    96.262] (II) This device may have been added with another device file.
[    96.262] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event9)
[    96.262] (II) No input driver specified, ignoring this device.
[    96.262] (II) This device may have been added with another device file.
[    96.263] (II) config/udev: Adding input device Broadcom Corp. Bluetooth USB Host Controller (/dev/input/event5)
[    96.263] (**) Broadcom Corp. Bluetooth USB Host Controller: Applying InputClass "libinput keyboard catchall"
[    96.263] (II) Using input driver 'libinput' for 'Broadcom Corp. Bluetooth USB Host Controller'
[    96.263] (**) Broadcom Corp. Bluetooth USB Host Controller: always reports core events
[    96.263] (**) Option "Device" "/dev/input/event5"
[    96.263] (**) Option "_source" "server/udev"
[    96.264] (II) event5  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) is tagged by udev as: Keyboard
[    96.264] (II) event5  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) device is a keyboard
[    96.264] (II) event5  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) device removed
[    96.290] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:05AC:8290.0001/input/input5/event5"
[    96.290] (II) XINPUT: Adding extended input device "Broadcom Corp. Bluetooth USB Host Controller" (type: KEYBOARD, id 10)
[    96.291] (II) event5  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) is tagged by udev as: Keyboard
[    96.291] (II) event5  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) device is a keyboard
[    96.292] (II) config/udev: Adding input device Broadcom Corp. Bluetooth USB Host Controller (/dev/input/event6)
[    96.292] (**) Broadcom Corp. Bluetooth USB Host Controller: Applying InputClass "libinput pointer catchall"
[    96.292] (II) Using input driver 'libinput' for 'Broadcom Corp. Bluetooth USB Host Controller'
[    96.292] (**) Broadcom Corp. Bluetooth USB Host Controller: always reports core events
[    96.292] (**) Option "Device" "/dev/input/event6"
[    96.292] (**) Option "_source" "server/udev"
[    96.457] (II) event6  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) is tagged by udev as: Mouse
[    96.457] (II) event6  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) device is a pointer
[    96.457] (II) event6  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) device removed
[    96.497] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:05AC:8290.0002/input/input6/event6"
[    96.497] (II) XINPUT: Adding extended input device "Broadcom Corp. Bluetooth USB Host Controller" (type: MOUSE, id 11)
[    96.497] (**) Option "AccelerationScheme" "none"
[    96.497] (**) Broadcom Corp. Bluetooth USB Host Controller: (accel) selected scheme none/0
[    96.497] (**) Broadcom Corp. Bluetooth USB Host Controller: (accel) acceleration factor: 2.000
[    96.497] (**) Broadcom Corp. Bluetooth USB Host Controller: (accel) acceleration threshold: 4
[    96.554] (II) event6  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) is tagged by udev as: Mouse
[    96.554] (II) event6  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) device is a pointer
[    96.555] (II) config/udev: Adding input device Broadcom Corp. Bluetooth USB Host Controller (/dev/input/mouse0)
[    96.555] (II) No input driver specified, ignoring this device.
[    96.555] (II) This device may have been added with another device file.
[    96.556] (II) config/udev: Adding input device Apple Inc. Apple Internal Keyboard / Trackpad (/dev/input/event7)
[    96.556] (**) Apple Inc. Apple Internal Keyboard / Trackpad: Applying InputClass "libinput keyboard catchall"
[    96.556] (II) Using input driver 'libinput' for 'Apple Inc. Apple Internal Keyboard / Trackpad'
[    96.556] (**) Apple Inc. Apple Internal Keyboard / Trackpad: always reports core events
[    96.556] (**) Option "Device" "/dev/input/event7"
[    96.556] (**) Option "_source" "server/udev"
[    96.557] (II) event7  - (II) Apple Inc. Apple Internal Keyboard / Trackpad: (II) is tagged by udev as: Keyboard
[    96.557] (II) event7  - (II) Apple Inc. Apple Internal Keyboard / Trackpad: (II) device is a keyboard
[    96.557] (II) event7  - (II) Apple Inc. Apple Internal Keyboard / Trackpad: (II) device removed
[    96.573] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.1/0003:05AC:0273.0004/input/input7/event7"
[    96.573] (II) XINPUT: Adding extended input device "Apple Inc. Apple Internal Keyboard / Trackpad" (type: KEYBOARD, id 12)
[    96.575] (II) event7  - (II) Apple Inc. Apple Internal Keyboard / Trackpad: (II) is tagged by udev as: Keyboard
[    96.575] (II) event7  - (II) Apple Inc. Apple Internal Keyboard / Trackpad: (II) device is a keyboard
[    96.576] (II) config/udev: Adding input device bcm5974 (/dev/input/event17)
[    96.576] (**) bcm5974: Applying InputClass "libinput touchpad catchall"
[    96.576] (**) bcm5974: Applying InputClass "touchpad catchall"
[    96.576] (**) bcm5974: Applying InputClass "Default clickpad buttons"
[    96.576] (**) bcm5974: Applying InputClass "Disable clickpad buttons on Apple touchpads"
[    96.576] (**) bcm5974: Applying InputClass "Touchpads"
[    96.576] (**) bcm5974: Applying InputClass "Touchpads"
[    96.576] (II) LoadModule: "mtrack"
[    96.576] (II) Loading /usr/lib/xorg/modules/input/mtrack_drv.so
[    96.576] (II) Module mtrack: vendor="X.Org Foundation"
[    96.576] 	compiled for 1.19.3, module version = 0.2.0
[    96.576] 	Module class: X.Org XInput Driver
[    96.576] 	ABI class: X.Org XInput driver, version 24.1
[    96.576] (II) Using input driver 'mtrack' for 'bcm5974'
[    96.576] (**) bcm5974: always reports core events
[    96.576] (**) bcm5974: always reports core events
[    96.576] (**) Option "FingerHigh" "12"
[    96.576] (**) Option "FingerLow" "8"
[    96.576] (**) Option "IgnoreThumb" "true"
[    96.577] (**) Option "IgnorePalm" "true"
[    96.577] (**) Option "ButtonIntegrated" "true"
[    96.577] (**) Option "ButtonMoveEmulate" "false"
[    96.577] (**) Option "TapButton1" "0"
[    96.577] (**) Option "TapButton2" "0"
[    96.577] (**) Option "TapButton3" "0"
[    96.577] (**) Option "TapButton4" "0"
[    96.577] (**) Option "ClickTime" "25"
[    96.577] (**) Option "ScrollDistance" "75"
[    96.577] (**) Option "SwipeUpButton" "0"
[    96.577] (**) Option "SwipeDownButton" "0"
[    96.577] (**) Option "SwipeLeftButton" "8"
[    96.577] (**) Option "SwipeRightButton" "9"
[    96.577] (**) Option "Sensitivity" "0.40"
[    96.577] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.2/input/input17/event17"
[    96.577] (II) XINPUT: Adding extended input device "bcm5974" (type: TOUCHPAD, id 13)
[    96.577] (II) device control: init
[    96.577] (**) Option "Device" "/dev/input/event17"
[    96.578] (II) mtrack: devname: bcm5974
[    96.578] (II) mtrack: devid: 5ac 273 1
[    96.578] (II) mtrack: caps: left mtdata ibt
[    96.578] (II) mtrack: 0: min: 0 max: 2048
[    96.578] (II) mtrack: 1: min: 0 max: 2048
[    96.578] (II) mtrack: 2: min: 0 max: 2048
[    96.578] (II) mtrack: 3: min: 0 max: 2048
[    96.578] (II) mtrack: 4: min: -16384 max: 16384
[    96.578] (II) mtrack: 5: min: -4828 max: 5345
[    96.578] (II) mtrack: 6: min: -203 max: 6803
[    96.578] (II) mtrack: 9: min: 0 max: 65535
[    96.613] (**) bcm5974: (accel) keeping acceleration scheme 1
[    96.613] (**) bcm5974: (accel) acceleration profile 0
[    96.614] (**) bcm5974: (accel) acceleration factor: 2.000
[    96.614] (**) bcm5974: (accel) acceleration threshold: 4
[    96.614] (II) device control: on
[    96.614] (II) Touchpad supports regular and approaching touches.
[    96.614] (II)   touch_min = 0, touch_max = 2048
[    96.615] (II) Touchpad supports minor touch widths.
[    96.615] (II) config/udev: Adding input device bcm5974 (/dev/input/mouse1)
[    96.615] (**) bcm5974: Ignoring device from InputClass "touchpad ignore duplicates"
[    96.616] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event14)
[    96.616] (II) No input driver specified, ignoring this device.
[    96.616] (II) This device may have been added with another device file.
[    96.616] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[    96.616] (II) No input driver specified, ignoring this device.
[    96.616] (II) This device may have been added with another device file.
[    96.617] (II) config/udev: Adding input device HDA Intel PCH SPDIF (/dev/input/event16)
[    96.617] (II) No input driver specified, ignoring this device.
[    96.617] (II) This device may have been added with another device file.
[    96.617] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[    96.617] (II) No input driver specified, ignoring this device.
[    96.617] (II) This device may have been added with another device file.
[   112.205] (II) event3  - (II) Power Button: (II) device removed
[   112.220] (II) event4  - (II) Video Bus: (II) device removed
[   112.260] (II) event1  - (II) Power Button: (II) device removed
[   112.290] (II) event2  - (II) Sleep Button: (II) device removed
[   112.310] (II) event5  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) device removed
[   112.330] (II) event6  - (II) Broadcom Corp. Bluetooth USB Host Controller: (II) device removed
[   112.370] (II) event7  - (II) Apple Inc. Apple Internal Keyboard / Trackpad: (II) device removed
[   112.390] (II) device control: off
[   112.430] (II) AIGLX: Suspending AIGLX clients for VT switch

Last edited by mothbe (2017-09-20 22:41:08)

Offline

#2 2017-09-20 20:27:03

loqs
Member
Registered: 2014-03-06
Posts: 17,197

Re: [SOLVED] i915 gpu hang error

Welcome to the arch linux forums mothbe.  Was the previous kernel 4.12 based?  Can you try booting with the Kernel parameter intel_iommu=off please.

Offline

#3 2017-09-20 22:38:48

mothbe
Member
Registered: 2017-09-20
Posts: 3

Re: [SOLVED] i915 gpu hang error

4.12.10-2 - was previous version on my laptop.
pacman.log:

[2017-09-20 20:17] [ALPM] upgraded linux-zen (4.12.10-2 -> 4.13.2-1)

Kernel parameter:

intel_iommu=off

magically works for me.
Thanks for your help, Ioqs! I appreciate it a lot!

Offline

#4 2017-09-20 23:47:05

loqs
Member
Registered: 2014-03-06
Posts: 17,197

Re: [SOLVED] i915 gpu hang error

As an explanation of why 'intel_iommu=off' is neededwith linux-zen 4.13  https://git.archlinux.org/svntogit/pack … 4486205895 added CONFIG_INTEL_IOMMU_DEFAULT_ON=y to the kernel config
So intel_iommu=off is needed to override this and restore 4.12 behaviour on systems where Intel IOMMU enablement is causing issues.  Related bug https://bugs.archlinux.org/task/55629

Offline

#5 2017-09-29 01:35:49

nilesrogoff
Member
Registered: 2017-09-29
Posts: 1

Re: [SOLVED] i915 gpu hang error

Just had this exact same problem, total gpu hang with Intel HD Graphics 5500.

Why would they enable something that's going to cause a total freeze on multiple machines? After some googling it looks like my GPU model isn't the only one to have this problem

Offline

#6 2017-09-29 12:44:42

zetilozeyaho
Member
Registered: 2017-05-19
Posts: 5

Re: [SOLVED] i915 gpu hang error

Same issue appears on Intel Corporation HD Graphics 6000 (rev 09) since update to regular mainline Kernel 4.13.3-1.


DE: Openbox / LXQt
No display manager.
Autostart X via ~/.bash_profile

Driver: modeset
Hole total system freeze, empty Xorg.log

downgraded linux (4.13.3-1 -> 4.12.8-2) -> works again.

Edit:
Added intel_iommu=off to kernel command line, updated to 4.13.-1 -> works.

Last edited by zetilozeyaho (2017-09-29 12:56:13)

Offline

#7 2017-09-30 10:39:04

ValadeA
Member
Registered: 2015-08-16
Posts: 4

Re: [SOLVED] i915 gpu hang error

This trick seems to work or me as well ! (Intel HD 5500) Thanks !!

Offline

#8 2017-10-01 00:31:57

felixita
Member
From: Venezia
Registered: 2016-02-02
Posts: 32

Re: [SOLVED] i915 gpu hang error

Work also for me on macbook pro 12,1 (iris 6100). Thanks!

Offline

#9 2017-10-01 15:35:42

felixita
Member
From: Venezia
Registered: 2016-02-02
Posts: 32

Re: [SOLVED] i915 gpu hang error

What is the reason to change into the kernel intel_iommu=on by default?

Last edited by felixita (2017-10-01 18:32:50)

Offline

#10 2017-10-03 07:12:54

mkopta
Member
Registered: 2013-08-17
Posts: 3

Re: [SOLVED] i915 gpu hang error

Had the same issue, adding intel_iommu=off to my kernel line fixed it. Thanks guys.

Offline

#11 2017-10-03 21:19:39

ach94er
Member
Registered: 2017-10-02
Posts: 1

Re: [SOLVED] i915 gpu hang error

Helped me out as well, thank you a lot!

Offline

Board footer

Powered by FluxBB