You are not logged in.
- Topics: Active | Unanswered
#1 2017-10-08 12:00:20
- dlz
- Member
- Registered: 2011-04-04
- Posts: 18
[solved] xorg dwm st / font rendering failure
Hello!
and thank you for reading this.
Since last week I have "font rendering failures" every time I start "X" for the FIRST time.
When I close "X" and start it again, all failures are gone.
(I start "X" with "startx" or "exec startx" by hand.)
Downgrading to linux-4.12.13-1 helps, and there are no failures at all.
I am using dwm and st. I also tested xterm, but there are the same issues.
For dwm and st I am using the "Terminus" font. I also tried "Dejavu" with st, but with no luck.
I never edited the fontconfig.
Screenshots:
https://imgur.com/a/JVk4a
Xorg.log with or without "font rendering failures" are the same, but here is it anyway:
[ 172.961]
X.Org X Server 1.19.4
Release Date: 2017-10-04
[ 172.961] X Protocol Version 11, Revision 0
[ 172.961] Build Operating System: Linux 4.12.12-1-ARCH x86_64
[ 172.961] Current Operating System: Linux amsterdam 4.13.4-1-ARCH #1 SMP PREEMPT Thu Sep 28 08:39:52 CEST 2017 x86_64
[ 172.961] Kernel command line: initrd=\intel-ucode.img initrd=\initramfs-linux.img root=PARTUUID=d59207b0-773f-44b9-bcd6-d50fb421cc6b add_efi_memmap rw
[ 172.962] Build Date: 05 October 2017 03:52:55AM
[ 172.962]
[ 172.962] Current version of pixman: 0.34.0
[ 172.966] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 172.966] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 172.980] (==) Log file: "/home/robert/.local/share/xorg/Xorg.0.log", Time: Sun Oct 8 13:13:46 2017
[ 172.985] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 172.988] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 172.988] (==) No Layout section. Using the first Screen section.
[ 172.988] (==) No screen section available. Using defaults.
[ 172.988] (**) |-->Screen "Default Screen Section" (0)
[ 172.988] (**) | |-->Monitor "<default monitor>"
[ 172.988] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 172.988] (**) | |-->Device "Intel Graphics"
[ 172.988] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 172.989] (==) Automatically adding devices
[ 172.989] (==) Automatically enabling devices
[ 172.989] (==) Automatically adding GPU devices
[ 172.989] (==) Automatically binding GPU devices
[ 172.989] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 172.989] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 172.989] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 172.989] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 172.989] (II) Loader magic: 0x55a76b5fdd60
[ 172.989] (II) Module ABI versions:
[ 172.989] X.Org ANSI C Emulation: 0.4
[ 172.989] X.Org Video Driver: 23.0
[ 172.989] X.Org XInput driver : 24.1
[ 172.989] X.Org Server Extension : 10.0
[ 172.990] (++) using VT number 1
[ 172.990] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 172.992] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 172.993] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 172.994] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[ 172.999] (--) PCI:*(0:0:2:0) 8086:0f31:1462:7877 rev 14, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x0000f080/8, BIOS @ 0x????????/131072
[ 172.999] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 172.999] (II) LoadModule: "glx"
[ 172.999] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 173.001] (II) Module glx: vendor="X.Org Foundation"
[ 173.001] compiled for 1.19.4, module version = 1.0.0
[ 173.001] ABI class: X.Org Server Extension, version 10.0
[ 173.001] (II) LoadModule: "intel"
[ 173.001] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 173.002] (II) Module intel: vendor="X.Org Foundation"
[ 173.002] compiled for 1.19.3, module version = 2.99.917
[ 173.002] Module class: X.Org Video Driver
[ 173.002] ABI class: X.Org Video Driver, version 23.0
[ 173.002] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 173.002] (II) intel: Driver for Intel(R) HD Graphics
[ 173.002] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[ 173.002] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[ 173.002] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 173.002] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20170619
[ 173.002] (II) intel(0): SNA compiled from 2.99.917-781-gc8990575
[ 173.003] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 173.003] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics
[ 173.003] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2; using a maximum of 4 threads
[ 173.003] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 173.003] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 173.003] (==) intel(0): RGB weight 888
[ 173.003] (==) intel(0): Default visual is TrueColor
[ 173.003] (**) intel(0): Option "TearFree" "true"
[ 173.004] (II) intel(0): Output VGA1 has no monitor section
[ 173.004] (II) intel(0): Enabled output VGA1
[ 173.004] (II) intel(0): Output DP1 has no monitor section
[ 173.004] (II) intel(0): Enabled output DP1
[ 173.004] (II) intel(0): Output HDMI1 has no monitor section
[ 173.004] (II) intel(0): Enabled output HDMI1
[ 173.004] (II) intel(0): Output DP2 has no monitor section
[ 173.005] (II) intel(0): Enabled output DP2
[ 173.005] (II) intel(0): Output HDMI2 has no monitor section
[ 173.005] (II) intel(0): Enabled output HDMI2
[ 173.005] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[ 173.005] (II) intel(0): Output VIRTUAL1 has no monitor section
[ 173.005] (II) intel(0): Enabled output VIRTUAL1
[ 173.005] (--) intel(0): Output VGA1 using initial mode 1440x900 on pipe 0
[ 173.005] (**) intel(0): TearFree enabled
[ 173.005] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[ 173.005] (==) intel(0): DPI set to (96, 96)
[ 173.005] (II) Loading sub module "dri3"
[ 173.005] (II) LoadModule: "dri3"
[ 173.005] (II) Module "dri3" already built-in
[ 173.005] (II) Loading sub module "dri2"
[ 173.005] (II) LoadModule: "dri2"
[ 173.005] (II) Module "dri2" already built-in
[ 173.005] (II) Loading sub module "present"
[ 173.005] (II) LoadModule: "present"
[ 173.005] (II) Module "present" already built-in
[ 173.005] (==) Depth 24 pixmap format is 32 bpp
[ 173.006] (II) intel(0): SNA initialized with Baytrail (gen7) backend
[ 173.006] (==) intel(0): Backing store enabled
[ 173.006] (==) intel(0): Silken mouse enabled
[ 173.006] (II) intel(0): HW Cursor enabled
[ 173.006] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 173.006] (==) intel(0): DPMS enabled
[ 173.006] (==) intel(0): Display hotplug detection enabled
[ 173.006] (II) intel(0): [DRI2] Setup complete
[ 173.006] (II) intel(0): [DRI2] DRI driver: i965
[ 173.006] (II) intel(0): [DRI2] VDPAU driver: va_gl
[ 173.006] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[ 173.006] (II) intel(0): hardware support for Present enabled
[ 173.006] (--) RandR disabled
[ 173.032] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 173.032] (II) AIGLX: enabled GLX_ARB_create_context
[ 173.032] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 173.032] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[ 173.032] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 173.032] (II) AIGLX: enabled GLX_SGI_swap_control
[ 173.032] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 173.032] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 173.032] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[ 173.032] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 173.032] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[ 173.032] (II) AIGLX: Loaded and initialized i965
[ 173.032] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 173.037] (II) intel(0): switch to mode 1440x900@60.0 on VGA1 using pipe 0, position (0, 0), rotation normal, reflection none
[ 173.041] (II) intel(0): Setting screen physical size to 381 x 238
[ 173.137] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 173.137] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 173.137] (**) Power Button: Applying InputClass "system-keyboard"
[ 173.137] (II) LoadModule: "libinput"
[ 173.137] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 173.141] (II) Module libinput: vendor="X.Org Foundation"
[ 173.141] compiled for 1.19.3, module version = 0.26.0 [97/251]
[ 173.141] Module class: X.Org XInput Driver
[ 173.141] ABI class: X.Org XInput driver, version 24.1
[ 173.141] (II) Using input driver 'libinput' for 'Power Button'
[ 173.142] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 20 paused 0
[ 173.143] (**) Power Button: always reports core events
[ 173.143] (**) Option "Device" "/dev/input/event3"
[ 173.143] (**) Option "_source" "server/udev"
[ 173.143] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 173.143] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 173.143] (II) event3 - (II) Power Button: (II) device removed
[ 173.143] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 173.144] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 173.144] (**) Option "xkb_model" "pc105"
[ 173.144] (**) Option "xkb_layout" "us"
[ 173.144] (**) Option "xkb_variant" "altgr-intl"
[ 173.202] (II) event3 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 173.202] (II) event3 - (II) Power Button: (II) device is a keyboard
[ 173.203] (II) config/udev: Adding input device Video Bus (/dev/input/event5)
[ 173.203] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[ 173.203] (**) Video Bus: Applying InputClass "system-keyboard"
[ 173.203] (II) Using input driver 'libinput' for 'Video Bus'
[ 173.204] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 23 paused 0
[ 173.205] (**) Video Bus: always reports core events
[ 173.205] (**) Option "Device" "/dev/input/event5"
[ 173.205] (**) Option "_source" "server/udev"
[ 173.206] (II) event5 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 173.206] (II) event5 - (II) Video Bus: (II) device is a keyboard
[ 173.206] (II) event5 - (II) Video Bus: (II) device removed
[ 173.206] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7/event5"
[ 173.206] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 173.206] (**) Option "xkb_model" "pc105"
[ 173.207] (**) Option "xkb_layout" "us"
[ 173.207] (**) Option "xkb_variant" "altgr-intl"
[ 173.208] (II) event5 - (II) Video Bus: (II) is tagged by udev as: Keyboard
[ 173.208] (II) event5 - (II) Video Bus: (II) device is a keyboard
[ 173.209] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 173.209] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[ 173.209] (**) Power Button: Applying InputClass "system-keyboard"
[ 173.209] (II) Using input driver 'libinput' for 'Power Button'
[ 173.210] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24 paused 0
[ 173.211] (**) Power Button: always reports core events
[ 173.211] (**) Option "Device" "/dev/input/event1"
[ 173.211] (**) Option "_source" "server/udev"
[ 173.212] (II) event1 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 173.212] (II) event1 - (II) Power Button: (II) device is a keyboard
[ 173.212] (II) event1 - (II) Power Button: (II) device removed
[ 173.212] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[ 173.212] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 173.212] (**) Option "xkb_model" "pc105"
[ 173.212] (**) Option "xkb_layout" "us"
[ 173.212] (**) Option "xkb_variant" "altgr-intl"
[ 173.214] (II) event1 - (II) Power Button: (II) is tagged by udev as: Keyboard
[ 173.214] (II) event1 - (II) Power Button: (II) device is a keyboard
[ 173.214] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 173.214] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[ 173.214] (**) Sleep Button: Applying InputClass "system-keyboard"
[ 173.214] (II) Using input driver 'libinput' for 'Sleep Button'
[ 173.215] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 25 paused 0
[ 173.216] (**) Sleep Button: always reports core events
[ 173.216] (**) Option "Device" "/dev/input/event2"
[ 173.216] (**) Option "_source" "server/udev"
[ 173.217] (II) event2 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 173.217] (II) event2 - (II) Sleep Button: (II) device is a keyboard
[ 173.217] (II) event2 - (II) Sleep Button: (II) device removed
[ 173.217] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input3/event2"
[ 173.217] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 173.217] (**) Option "xkb_model" "pc105"
[ 173.217] (**) Option "xkb_layout" "us"
[ 173.217] (**) Option "xkb_variant" "altgr-intl"
[ 173.218] (II) event2 - (II) Sleep Button: (II) is tagged by udev as: Keyboard
[ 173.218] (II) event2 - (II) Sleep Button: (II) device is a keyboard
[ 173.219] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 173.219] (II) No input driver specified, ignoring this device.
[ 173.219] (II) This device may have been added with another device file.
[ 173.220] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 173.220] (II) No input driver specified, ignoring this device.
[ 173.220] (II) This device may have been added with another device file.
[ 173.220] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event10)
[ 173.220] (II) No input driver specified, ignoring this device.
[ 173.220] (II) This device may have been added with another device file.
[ 173.221] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event11)
[ 173.221] (II) No input driver specified, ignoring this device.
[ 173.221] (II) This device may have been added with another device file.
[ 173.221] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 173.221] (II) No input driver specified, ignoring this device.
[ 173.221] (II) This device may have been added with another device file.
[ 173.222] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event7)
[ 173.222] (II) No input driver specified, ignoring this device.
[ 173.222] (II) This device may have been added with another device file.
[ 173.222] (II) config/udev: Adding input device Intel Virtual Button driver (/dev/input/event4)
[ 173.222] (**) Intel Virtual Button driver: Applying InputClass "libinput keyboard catchall"
[ 173.222] (**) Intel Virtual Button driver: Applying InputClass "system-keyboard"
[ 173.222] (II) Using input driver 'libinput' for 'Intel Virtual Button driver'
[ 173.223] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 26 paused 0
[ 173.224] (**) Intel Virtual Button driver: always reports core events
[ 173.224] (**) Option "Device" "/dev/input/event4"
[ 173.224] (**) Option "_source" "server/udev"
[ 173.225] (II) event4 - (II) Intel Virtual Button driver: (II) is tagged by udev as: Keyboard
[ 173.225] (II) event4 - (II) Intel Virtual Button driver: (II) device is a keyboard
[ 173.225] (II) event4 - (II) Intel Virtual Button driver: (II) device removed
[ 173.225] (**) Option "config_info" "udev:/sys/devices/platform/INT33D6:00/input/input5/event4"
[ 173.225] (II) XINPUT: Adding extended input device "Intel Virtual Button driver" (type: KEYBOARD, id 10)
[ 173.225] (**) Option "xkb_model" "pc105"
[ 173.225] (**) Option "xkb_layout" "us"
[ 173.225] (**) Option "xkb_variant" "altgr-intl"
[ 173.226] (II) event4 - (II) Intel Virtual Button driver: (II) is tagged by udev as: Keyboard
[ 173.226] (II) event4 - (II) Intel Virtual Button driver: (II) device is a keyboard
[ 173.227] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 173.227] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[ 173.227] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 173.227] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[ 173.228] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 27 paused 0
[ 173.228] (**) AT Translated Set 2 keyboard: always reports core events
[ 173.228] (**) Option "Device" "/dev/input/event0"
[ 173.228] (**) Option "_source" "server/udev"
[ 173.229] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 173.229] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 173.229] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device removed
[ 173.229] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 173.229] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[ 173.229] (**) Option "xkb_model" "pc105"
[ 173.229] (**) Option "xkb_layout" "us"
[ 173.229] (**) Option "xkb_variant" "altgr-intl"
[ 173.230] (II) event0 - (II) AT Translated Set 2 keyboard: (II) is tagged by udev as: Keyboard
[ 173.230] (II) event0 - (II) AT Translated Set 2 keyboard: (II) device is a keyboard
[ 173.231] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/event12)
[ 173.231] (**) ImPS/2 Logitech Wheel Mouse: Applying InputClass "libinput pointer catchall"
[ 173.231] (II) Using input driver 'libinput' for 'ImPS/2 Logitech Wheel Mouse'
[ 173.232] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 28 paused 0
[ 173.233] (**) ImPS/2 Logitech Wheel Mouse: always reports core events
[ 173.233] (**) Option "Device" "/dev/input/event12"
[ 173.233] (**) Option "_source" "server/udev"
[ 173.233] (II) event12 - (II) ImPS/2 Logitech Wheel Mouse: (II) is tagged by udev as: Mouse
[ 173.233] (II) event12 - (II) ImPS/2 Logitech Wheel Mouse: (II) device set to 400 DPI
[ 173.233] (II) event12 - (II) ImPS/2 Logitech Wheel Mouse: (II) device is a pointer
[ 173.233] (II) event12 - (II) ImPS/2 Logitech Wheel Mouse: (II) device removed
[ 173.234] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event12"
[ 173.234] (II) XINPUT: Adding extended input device "ImPS/2 Logitech Wheel Mouse" (type: MOUSE, id 12)
[ 173.234] (**) Option "AccelerationScheme" "none"
[ 173.234] (**) ImPS/2 Logitech Wheel Mouse: (accel) selected scheme none/0
[ 173.234] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration factor: 2.000
[ 173.234] (**) ImPS/2 Logitech Wheel Mouse: (accel) acceleration threshold: 4
[ 173.235] (II) event12 - (II) ImPS/2 Logitech Wheel Mouse: (II) is tagged by udev as: Mouse
[ 173.235] (II) event12 - (II) ImPS/2 Logitech Wheel Mouse: (II) device set to 400 DPI
[ 173.235] (II) event12 - (II) ImPS/2 Logitech Wheel Mouse: (II) device is a pointer
[ 173.235] (II) config/udev: Adding input device ImPS/2 Logitech Wheel Mouse (/dev/input/mouse0)
[ 173.235] (II) No input driver specified, ignoring this device.
[ 173.235] (II) This device may have been added with another device file.I run a second PC with the same hardware, but with xfce. There are no issues at all.
I tried to load the font cache with "fc-cache" before starting "X", but this done nothing.
I have no idea where to look or what to test next.
I need some hints.
Thank you!
Last edited by dlz (2017-10-08 15:14:27)
Offline
#2 2017-10-08 12:44:13
- sekret
- Member
- Registered: 2013-07-22
- Posts: 308
Re: [solved] xorg dwm st / font rendering failure
I also use dwm and st. I also configured st to use terminus font. Here's how I configured it in st's config.h:
char font[] = "xos4 Terminus:pixelsize=12:antialias=false:autohint=false";Does yours look like this?
Offline
#3 2017-10-08 13:47:05
- dlz
- Member
- Registered: 2011-04-04
- Posts: 18
Re: [solved] xorg dwm st / font rendering failure
I am using this for dwm and st: "xos4 Terminus:size=12"
I also tried your line, but that does not help.
Offline
#4 2017-10-08 14:15:47
- seth
- Member
- From: Won't reply 2 private help req
- Registered: 2012-09-03
- Posts: 78,129
Re: [solved] xorg dwm st / font rendering failure
In this order:
* add "intel_iommu=off" to the kernel parameters
* try the modesetting driver
* try uxa (on the intel driver)
Offline
#5 2017-10-08 15:17:23
- dlz
- Member
- Registered: 2011-04-04
- Posts: 18
Re: [solved] xorg dwm st / font rendering failure
seth wrote:
In this order:
* add "intel_iommu=off" to the kernel parameters
* try the modesetting driver
* try uxa (on the intel driver)
Thank you for leading me in the right direction.
Removing this line from the Xorg configuration:
Option "TearFree" "true"solved all issues.
Thank you!
Last edited by dlz (2017-10-08 15:32:16)
Offline