You are not logged in.

#1 2018-02-07 23:01:21

Salkay
Member
Registered: 2014-05-22
Posts: 636

[SOLVED] Recent X crashes

Since Sat Feb 3, X has been extremely unreliable for me. It's crashing regularly several times a day. I'm using KDE Plasma and Nvidia drivers.

There is nothing in journalctl. I also checked /var/log/Xorg.0.log. There's not much, except the following lines.

[    15.184] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)

which seems to be unimportant. The following is also spammed.

[   523.179] (WW) NVIDIA(0): Suspend swap group failed.
[   523.180] (WW) NVIDIA(0): Resume swap group failed.
[   523.182] (WW) NVIDIA(0): Suspend swap group failed.
[   523.182] (WW) NVIDIA(0): Resume swap group failed.
[   523.182] (WW) NVIDIA(0): Suspend swap group failed.
[   523.182] (WW) NVIDIA(0): Resume swap group failed.

However, this only occurs after switching ttys. I'm also reasonably sure that I have had X crash before switching tty at all.

I've tried a few things, none of which have worked. I normally use linux/nvidia, so I tried the -lts version of both. X still crashed.

I also tried reverting to the following packages, which were updated just before the crashes started.

mesa-17.3.3-1
mesa-vdpau-17.3.3-1
libva-mesa-driver-17.3.3-1
xorg-server-common-1.19.6-2
xorg-server-1.19.6-2

I followed the wiki's Nvidia page, disabling RenderAccel in xorg.conf. However, after restarting, my framerate decreased to ~2 frames/sec.

I also tried using nopat as a kernel parameter, as per the wiki, but X wouldn't even start.

I tried changing the (KDE Plasma) rendering backend. I normally use XRender. I tried both OpenGL version, but both are extremely unstable, and cause kwin to crash every few seconds after switching ttys.

Finally, there are some errors in the startup (in journalctl), but I'm unsure how important these are.

Feb 08 09:50:17 salkay-home kernel: ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
Feb 08 09:50:17 salkay-home kernel: ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170831/psobject-252)
Feb 08 09:50:17 salkay-home kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170831/psparse-550)
Feb 08 09:50:17 salkay-home kernel: ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
Feb 08 09:50:17 salkay-home kernel: ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170831/psobject-252)
Feb 08 09:50:17 salkay-home kernel: ACPI Error: Method parse/execution failed \_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170831/psparse-550)
...
Feb 08 09:50:17 salkay-home kernel: pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID)
Feb 08 09:50:17 salkay-home kernel: pcieport 0000:00:1c.4:   device [8086:a294] error status/mask=00000001/00002000
Feb 08 09:50:17 salkay-home kernel: pcieport 0000:00:1c.4:    [ 0] Receiver Error         (First)
...
Feb 08 09:50:17 salkay-home kernel: kvm: disabled by bios

FWIW this is the list of packages that I upgraded since the last stable period and the period of instability:

[2018-01-28 10:24] [ALPM] upgraded curl (7.57.0-1 -> 7.58.0-1)
[2018-01-28 10:24] [ALPM] upgraded lib32-curl (7.57.0-1 -> 7.58.0-1)
[2018-01-28 10:24] [ALPM] upgraded libcurl-compat (7.57.0-1 -> 7.58.0-1)
[2018-01-28 10:24] [ALPM] upgraded lib32-libcurl-compat (7.57.0-1 -> 7.58.0-1)
[2018-01-28 10:24] [ALPM] upgraded mlt (6.6.0-1 -> 6.6.0-2)
[2018-01-28 10:29] [ALPM] upgraded zsh-zim-git (r376.c501a1b-1 -> r378.e917140-1)
[2018-01-28 10:29] [ALPM] upgraded vim-startify-git (1:1.1.r153.gfbcba23-1 -> 1:1.1.r154.g4f1cd14-1)
[2018-01-28 10:29] [ALPM] upgraded vim-airline-git (1:0.9.r0.ge02176a-1 -> 1:0.9.r4.gc2ffb8b-1)
[2018-01-28 11:50] [ALPM] upgraded btrfs-progs (4.14-2 -> 4.14.1-1)
[2018-01-28 11:50] [ALPM] upgraded gzip (1.8-2 -> 1.9-1)
[2018-01-28 11:50] [ALPM] upgraded libnftnl (1.0.8-1 -> 1.0.9-1)
[2018-01-29 10:21] [ALPM] upgraded vim-runtime (8.0.1415-2 -> 8.0.1436-1)
[2018-01-29 10:21] [ALPM] upgraded gvim (8.0.1415-2 -> 8.0.1436-1)
[2018-01-29 10:21] [ALPM] upgraded juk (17.12.1-1 -> 17.12.1-2)
[2018-01-29 10:21] [ALPM] upgraded link-grammar (5.3.15-1 -> 5.4.3-1)
[2018-01-29 10:21] [ALPM] upgraded notmuch-runtime (0.26-1 -> 0.26-2)
[2018-01-29 10:21] [ALPM] upgraded notmuch (0.26-1 -> 0.26-2)
[2018-01-29 10:21] [ALPM] upgraded notmuch-mutt (0.26-1 -> 0.26-2)
[2018-01-29 10:21] [ALPM] upgraded python-pyicu (2.0.2-1 -> 2.0.3-1)
[2018-01-29 10:21] [ALPM] upgraded wxpython (3.0.2.0-6 -> 3.0.2.0-7)
[2018-01-29 20:04] [ALPM] upgraded lib32-attr (2.4.47-1 -> 2.4.47-2)
[2018-01-29 21:58] [ALPM] upgraded lcms (1.19-6 -> 1.19-7)
[2018-01-30 19:43] [ALPM] upgraded archlinux-appstream-data (20171217-1 -> 20180129-1)
[2018-01-30 19:43] [ALPM] upgraded encfs (1.9.2-2 -> 1.9.4-1)
[2018-01-30 19:43] [ALPM] upgraded fribidi (0.19.7-1 -> 0.19.7-2)
[2018-01-30 19:43] [ALPM] upgraded gmrun (0.9.2-6 -> 0.9.2-7)
[2018-01-30 19:43] [ALPM] upgraded perl-dbi (1.639-1 -> 1.640-1)
[2018-01-30 19:43] [ALPM] upgraded perl-mime-types (2.16-1 -> 2.17-1)
[2018-01-30 19:43] [ALPM] upgraded ranger (1.8.1-1 -> 1.9.0-1)
[2018-01-30 19:43] [ALPM] upgraded rsync (3.1.3pre1-1 -> 3.1.3-1)
[2018-01-30 19:43] [ALPM] upgraded ruby-docs (2.5.0-2 -> 2.5.0-4)
[2018-01-30 19:45] [ALPM] upgraded phyml-mpi (1:3.3.20170530-1 -> 1:3.3.20180129-1)
[2018-01-30 19:45] [ALPM] upgraded nvim-r (0.9.10-1 -> 0.9.11-1)
[2018-01-30 21:55] [ALPM] upgraded dbus-glib (0.108-1 -> 0.110-1)
[2018-01-30 21:55] [ALPM] upgraded gtk-update-icon-cache (3.22.26+47+g3a1a7135a2-3 -> 3.22.26+161+g60750b3ffd-1)
[2018-01-30 21:55] [ALPM] upgraded gtk3 (3.22.26+47+g3a1a7135a2-3 -> 3.22.26+161+g60750b3ffd-1)
[2018-01-30 21:55] [ALPM] upgraded firefox (58.0-1 -> 58.0.1-1)
[2018-01-30 22:51] [ALPM] upgraded python-dbus-common (1.2.4-2 -> 1.2.6-1)
[2018-01-30 22:51] [ALPM] upgraded python-dbus (1.2.4-2 -> 1.2.6-1)
[2018-01-30 22:51] [ALPM] upgraded python2-dbus (1.2.4-2 -> 1.2.6-1)
[2018-01-31 08:17] [ALPM] upgraded editorconfig-core-c (0.12.1-2 -> 0.12.1-3)
[2018-01-31 08:17] [ALPM] upgraded freetype2 (2.9-1 -> 2.9-2)
[2018-01-31 08:17] [ALPM] upgraded gnome-themes-standard (3.22.3+13+ga993fdc0-1 -> 3.22.3+16+gc092fc89-1)
[2018-01-31 09:33] [ALPM] upgraded mlt (6.6.0-2 -> 6.6.0-3)
[2018-01-31 09:34] [ALPM] upgraded phyml-mpi (1:3.3.20180129-1 -> 1:3.3.20180129-2)
[2018-01-31 19:47] [ALPM] upgraded appstream (0.11.8-1 -> 0.11.8-2)
[2018-01-31 19:47] [ALPM] upgraded libcups (2.2.6-1 -> 2.2.6-4)
[2018-01-31 19:47] [ALPM] upgraded mesa (17.3.3-1 -> 17.3.3-2)
[2018-01-31 19:47] [ALPM] upgraded xorg-server-common (1.19.6-2 -> 1.19.6+13+gd0d1a694f-1)
[2018-01-31 19:47] [ALPM] upgraded libevdev (1.5.7-1 -> 1.5.8-1)
[2018-01-31 19:47] [ALPM] upgraded libtirpc (1.0.2-1 -> 1.0.2-2)
[2018-01-31 19:47] [ALPM] upgraded xorg-server (1.19.6-2 -> 1.19.6+13+gd0d1a694f-1)
[2018-01-31 19:47] [ALPM] upgraded appstream-qt (0.11.8-1 -> 0.11.8-2)
[2018-01-31 19:47] [ALPM] upgraded cups-filters (1.17.9-3 -> 1.20.0-1)
[2018-01-31 19:47] [ALPM] upgraded cups (2.2.6-1 -> 2.2.6-4)
[2018-01-31 19:47] [ALPM] upgraded libva-mesa-driver (17.3.3-1 -> 17.3.3-2)
[2018-01-31 19:47] [ALPM] upgraded mesa-vdpau (17.3.3-1 -> 17.3.3-2)
[2018-01-31 19:47] [ALPM] upgraded nano (2.9.2-1 -> 2.9.3-1)
[2018-02-01 08:21] [ALPM] upgraded harfbuzz (1.7.4-1 -> 1.7.5-1)
[2018-02-01 08:21] [ALPM] upgraded harfbuzz-icu (1.7.4-1 -> 1.7.5-1)
[2018-02-01 08:21] [ALPM] upgraded languagetool (3.9-1 -> 4.0-1)
[2018-02-01 08:21] [ALPM] upgraded pyqt5-common (5.10-1 -> 5.10-2)
[2018-02-01 08:21] [ALPM] upgraded python-pyqt5 (5.10-1 -> 5.10-2)
[2018-02-01 08:21] [ALPM] upgraded python2-apsw (3.15.2-1 -> 3.21.0-1)
[2018-02-01 08:21] [ALPM] upgraded python2-pyqt5 (5.10-1 -> 5.10-2)
[2018-02-02 20:20] [ALPM] upgraded gnupg (2.2.4-1 -> 2.2.4-2)
[2018-02-02 20:20] [ALPM] upgraded gst-plugins-bad (1.12.4-2 -> 1.12.4-3)
[2018-02-02 20:20] [ALPM] upgraded nodejs (9.4.0-1 -> 9.5.0-1)
[2018-02-02 20:20] [ALPM] upgraded re2 (20180101-1 -> 20180201-1)
[2018-02-02 20:20] [ALPM] upgraded thunderbird (52.5.2-1 -> 52.6.0-1)
[2018-02-02 20:20] [ALPM] upgraded thunderbird-i18n-en-gb (52.5.2-1 -> 52.6.0-1)
[2018-02-02 20:20] [ALPM] upgraded vtk6 (6.3.0-10 -> 6.3.0-11)
[2018-02-02 21:20] [ALPM] upgraded librsvg (2:2.42.1-1 -> 2:2.42.2-1)
[2018-02-03 10:11] [ALPM] upgraded gcc-libs (7.2.1+20180116-1 -> 7.3.0-1)
[2018-02-03 10:11] [ALPM] upgraded bash (4.4.012-2 -> 4.4.018-1)
[2018-02-03 10:11] [ALPM] upgraded libtool (2.4.6+40+g6ca5e224-2 -> 2.4.6+40+g6ca5e224-4)
[2018-02-03 10:11] [ALPM] upgraded chromium (64.0.3282.119-1 -> 64.0.3282.140-1)
[2018-02-03 10:11] [ALPM] upgraded gcc (7.2.1+20180116-1 -> 7.3.0-1)
[2018-02-03 10:11] [ALPM] upgraded gcc-fortran (7.2.1+20180116-1 -> 7.3.0-1)
[2018-02-03 10:11] [ALPM] upgraded lib32-gcc-libs (7.2.1+20180116-1 -> 7.3.0-1)
[2018-02-03 10:11] [ALPM] upgraded libixion (0.12.2-4 -> 0.13.0-1)
[2018-02-03 10:11] [ALPM] upgraded liborcus (0.12.1-4 -> 0.13.2-1)
[2018-02-03 10:11] [ALPM] upgraded libreoffice-fresh (5.4.4-1 -> 6.0.0-1)
[2018-02-03 10:11] [ALPM] upgraded libreoffice-fresh-en-GB (5.4.4-1 -> 6.0.0-1)
[2018-02-03 10:11] [ALPM] upgraded linux-lts (4.9.78-1 -> 4.14.16-1)
[2018-02-03 10:11] [ALPM] upgraded nvidia-lts (387.34-7 -> 1:387.34-1)
[2018-02-03 10:11] [ALPM] upgraded vte-common (0.50.2-1 -> 0.50.2+6+g7fe155b9-1)
[2018-02-03 10:11] [ALPM] upgraded vte3 (0.50.2-1 -> 0.50.2+6+g7fe155b9-1)
[2018-02-03 12:35] [ALPM] upgraded wine (3.0-1 -> 3.1-1)

Last edited by Salkay (2022-06-04 10:54:07)

Offline

#2 2018-02-08 09:46:06

seth
Member
Registered: 2012-09-03
Posts: 58,981

Re: [SOLVED] Recent X crashes

Are you sure it's the server and not the session that crashes? (If you loose ksmserver, your session exits and you'll be back to login, many DMs will restart the X server for this)

Online

#3 2018-02-08 11:32:33

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

seth wrote:

Are you sure it's the server and not the session that crashes? (If you loose ksmserver, your session exits and you'll be back to login, many DMs will restart the X server for this)

Hmmm… yeah I guess I don't know that. Is there any way to tell?

Since there were no KDE/Plasma updates recently, it guessed other packages might have been to blame. In any case, I noticed that there was a KDE/Plasma update today, so if those packages are to blame, then it might fix it.

Offline

#4 2018-02-08 11:39:07

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,289

Re: [SOLVED] Recent X crashes

Check if you get any coredumps and look through your journal.

Offline

#5 2018-02-08 12:01:02

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

V1del wrote:

Check if you get any coredumps and look through your journal.

Thanks for the suggestions. So there's nothing in journalctl, but coredumpctl list lists dumps for /usr/bin/kactivitymanagerd whose timings appear to match with my crashes. I guess it's conceivable that this is symptom, not a cause, but it's somewhere to start. I then ran

# coredumpctl info /usr/bin/kactivitymanagerd

which had the following "Signal" line:

        Signal: 6 (ABRT)

I then examined the backtrace, but I didn't seem too informative.

# coredumpctl gdb /usr/bin/kactivitymanagerd
           PID: 718 (kactivitymanage)
           UID: 1000 (salkay)
           GID: 1000 (salkay)
        Signal: 6 (ABRT)
     Timestamp: Thu 2018-02-08 22:50:14 AEDT (7min ago)
  Command Line: /usr/bin/kactivitymanagerd start-daemon
    Executable: /usr/bin/kactivitymanagerd
 Control Group: /user.slice/user-1000.slice/session-c1.scope
          Unit: session-c1.scope
         Slice: user-1000.slice
       Session: c1
     Owner UID: 1000 (salkay)
       Boot ID: d9267678768448c9845c0f61ac710773
    Machine ID: 030096d6684940059eedecf540768ddb
      Hostname: salkay-home
       Storage: /var/lib/systemd/coredump/core.kactivitymanage.1000.d9267678768448c9845c0f61ac710773.718.1518090614000000.lz4
       Message: Process 718 (kactivitymanage) of user 1000 dumped core.
                
                Stack trace of thread 718:
                #0  0x00007f948ee71860 raise (libc.so.6)
                #1  0x00007f948ee72ec9 abort (libc.so.6)
                #2  0x00007f948f6148c8 _ZNK14QMessageLogger5fatalEPKcz (libQt5Core.so.5)
                #3  0x00007f948f62460e _ZN7QThreadD2Ev (libQt5Core.so.5)
                #4  0x00007f94667c4eae n/a (/usr/lib/qt/plugins/kactivitymanagerd/1/kactivitymanagerd_plugin_sqlite.so (deleted))

GNU gdb (GDB) 8.1
Copyright (C) 2018 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-pc-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
<http://www.gnu.org/software/gdb/bugs/>.
Find the GDB manual and other documentation resources online at:
<http://www.gnu.org/software/gdb/documentation/>.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from /usr/bin/kactivitymanagerd...(no debugging symbols found)...done.

warning: core file may not match specified executable file.
[New LWP 718]
[New LWP 723]
[New LWP 724]
[New LWP 725]
[New LWP 726]
[New LWP 3487]
Core was generated by `/usr/bin/kactivitymanagerd start-daemon'.
Program terminated with signal SIGABRT, Aborted.
#0  0x00007f948ee71860 in ?? ()
[Current thread is 1 (LWP 718)]
(gdb) bt
#0  0x00007f948ee71860 in ?? ()
#1  0x0000000000000000 in ?? ()

Offline

#6 2018-02-08 12:35:30

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,289

Re: [SOLVED] Recent X crashes

Offline

#7 2018-02-08 14:06:15

seth
Member
Registered: 2012-09-03
Posts: 58,981

Re: [SOLVED] Recent X crashes

kactivitymanager shouldn't kill the session, though - what is *actually* happen when you talk about "crash"?

Online

#8 2018-02-08 14:36:07

Kabir
Member
From: India
Registered: 2016-12-06
Posts: 59

Re: [SOLVED] Recent X crashes

I've been getting those "suspend / resume" warnings in xorg logs as well, but only after I resume from suspend or hibernate. I put up a post at the nvidia forums about it.. https://devtalk.nvidia.com/default/topi … ia-390-25/

Offline

#9 2018-02-08 20:47:09

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

seth wrote:

kactivitymanager shouldn't kill the session, though - what is *actually* happen when you talk about "crash"?

Also, as I mentioned, there were no Plasma updates that triggered these crashes, although it's plausible that my config might have become corrupted. I could also try reverting my config from old backups.

Sorry, should have been clearer. I launch Plasma with startx. After crashing, I get kicked back to the console.

Kabir wrote:

I've been getting those "suspend / resume" warnings in xorg logs as well, but only after I resume from suspend or hibernate. I put up a post at the nvidia forums about it.. https://devtalk.nvidia.com/default/topi … ia-390-25/

Yes, I suspect that this might be a red herring for my crashes.

I've just checked my old Xorg logs from my backups, and I only have one file with the suspend/resume warnings, from yesterday. I'm not sure how informative the timing of that is.

=EDIT=
And another massive KDE update hit just then, so that might also fix it potentially. If it even is KDE.

Last edited by Salkay (2018-02-08 20:48:31)

Offline

#10 2018-02-08 21:05:33

seth
Member
Registered: 2012-09-03
Posts: 58,981

Re: [SOLVED] Recent X crashes

Assuming you "startkde" from xinitrc, tap gdb into ksmserver and Xorg (obviously from another VT ;-) and see which actually segfaults (though I think you should see indicators of an Xorg crash on the console)

Online

#11 2018-02-11 05:53:28

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

seth wrote:

Assuming you "startkde" from xinitrc, tap gdb into ksmserver and Xorg (obviously from another VT ;-) and see which actually segfaults

I've tried to do this, but it's behaving really erratically for me.

Just to be explicit, I open another TTY, obtain the PID with pgrep ksmserver -l, then run

sudo gdb -p <PID>

I then type in backtrace. The problem is that plasmshell/kwin appears to wig out even more frequently than normal. I normally restart plasmashell in such cases, but for some reason it won't restart unless I end the gdb session. Also, having gdb open prevents things like dolphin from opening. As soon as I exit, dolphin starts.

seth wrote:

(though I think you should see indicators of an Xorg crash on the console)

I just had a crash, and I saw a spam of "Timers cannot be stopped from another thread". However, I immediately started X again, it crashed in 60 seconds, but this time there was nothing on the console.

Last edited by Salkay (2018-02-11 06:09:20)

Offline

#12 2018-02-11 08:08:52

seth
Member
Registered: 2012-09-03
Posts: 58,981

Re: [SOLVED] Recent X crashes

gdb stops the pocess, you need to pass "continue", wait for the crash and then "bt"
See https://wiki.archlinux.org/index.php/De … _the_trace on details, notably thread backtracing and setting a gdb output file.

Online

#13 2018-02-12 09:51:19

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

Thank you for the link. That makes sense. I used "continue", as you suggested. After the crash and "bt", there were a few lines with

... in ?? () from /usr/lib/libQt5Core.so.5

Here is a photo of the full output. (Apologies for the photo instead of text. I've since learnt how to get gdb to write to a file, so I'll post text next time.)

I rebuilt qt5-core with options=(debug !strip), then installed it. However, the next time it crashed and I ran "bt", it just said "No stack." (Here is the full output).

Offline

#14 2018-02-12 10:34:03

seth
Member
Registered: 2012-09-03
Posts: 58,981

Re: [SOLVED] Recent X crashes

This does indeed more look like a less graceful handling of a previous Xorg crash (ksmserver tries to handle an xcb event and yells a warning what's probably "lost connection to server") - which should be recorded in your xorg log (otherwise you'll have to apply your new gdb skills to Xorg now ;-)

Online

#15 2018-02-12 11:44:07

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

I'm not entirely sure what you mean, but I previously checked /var/log/Xorg.0.log, and couldn't see anything obvious. (Some of this file is in the original post.)

I tried to repeat gdb with Xorg, but couldn't get it working. Again, I find the pid with pgrep Xorg -l, then run sudo gdb -p <PID>. I start logging with set logging on, then continue, but after that I cannot switch TTYs any more. The keyboard doesn't seem to do anything. I have to Alt+SysRq+E to regain keyboard control (which obviously kills X).

I've also tried updating my BIOS, just in case.

Last edited by Salkay (2018-02-12 11:58:39)

Offline

#16 2018-02-12 12:46:16

seth
Member
Registered: 2012-09-03
Posts: 58,981

Re: [SOLVED] Recent X crashes

Check the logs timestamp - it might be dated w/ more recent ones in ~/.local/share/xorg
The backtrace is usually at the end of the log (if Xorg segfaults)

I'd suggest to starx xterm and run startkde from the xterm.
If KDE crashes, you'll end up w/ X11 and the xterm, if X crashes yu wont ;-)

Online

#17 2018-02-13 11:42:38

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

seth wrote:

Check the logs timestamp - it might be dated w/ more recent ones in ~/.local/share/xorg

These logs are older. My understanding is that they are only used if you launch with a display manager? I'm starting X from the tty with startx.

seth wrote:

I'd suggest to starx xterm and run startkde from the xterm.
If KDE crashes, you'll end up w/ X11 and the xterm, if X crashes yu wont ;-)

Sounds good, but I'm not sure that I understand. Are you saying to start xterm directly from the tty?

$ xterm
xterm: Xt error: Can't open display: 
xterm: DISPLAY is not set
$ DISPLAY=:0 xterm
xterm: Xt error: Can't open display: :0

(Also, I also tried disabling compositing, but it still crashed.)

Offline

#18 2018-02-13 11:46:30

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,289

Re: [SOLVED] Recent X crashes

No use literally

startx xterm

, that will start a xorg server for your xterm. And could you post a dmesg?

Offline

#19 2018-02-14 00:48:04

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

Thanks, I can try that. However, since then, I tried installing xfce instead, and can reproduce the X crash on that, so I guess that means the fault is with X not KDE Plasma. Here is dmesg from that crashed session (followed by my current KDE Plasma session, which I'm using to post this message).

[    0.000000] microcode: microcode updated early to revision 0x80, date = 2018-01-04
[    0.000000] Linux version 4.15.2-2-ARCH (builduser@heftig-7084) (gcc version 7.3.0 (GCC)) #1 SMP PREEMPT Thu Feb 8 18:54:52 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9636a346-bd3f-4a1b-8f9c-764d636146b3 rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Intel Spectre v2 broken microcode detected; disabling Speculation Control
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000009fdaefff] usable
[    0.000000] BIOS-e820: [mem 0x000000009fdaf000-0x000000009fde9fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000009fdea000-0x00000000a019dfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000a019e000-0x00000000a019efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000a019f000-0x00000000a019ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000a01a0000-0x00000000acea3fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000acea4000-0x00000000ae760fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ae761000-0x00000000ae775fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ae776000-0x00000000ae875fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000ae876000-0x00000000aeb9dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000aeb9e000-0x00000000af72dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000af72e000-0x00000000af7a1fff] type 20
[    0.000000] BIOS-e820: [mem 0x00000000af7a2000-0x00000000af7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000af800000-0x00000000afffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000084effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0x9fdaf000  ACPI=0x9fdaf000  SMBIOS=0xaf68b000  SMBIOS 3.0=0xaf68a000  MPS=0xfcb20  ESRT=0xaaf7a318 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: System manufacturer System Product Name/PRIME Z370-A, BIOS 0607 01/08/2018
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x84f000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask 7FC0000000 uncachable
[    0.000000]   1 base 00B0000000 mask 7FF0000000 uncachable
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xaf800 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcdf0-0x000fcdff] mapped at [        (ptrval)]
[    0.000000] esrt: Reserving ESRT space from 0x00000000aaf7a318 to 0x00000000aaf7a350.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 95000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x2c4637000, 0x2c4637fff] PGTABLE
[    0.000000] BRK [0x2c4638000, 0x2c4638fff] PGTABLE
[    0.000000] BRK [0x2c4639000, 0x2c4639fff] PGTABLE
[    0.000000] BRK [0x2c463a000, 0x2c463afff] PGTABLE
[    0.000000] BRK [0x2c463b000, 0x2c463bfff] PGTABLE
[    0.000000] BRK [0x2c463c000, 0x2c463cfff] PGTABLE
[    0.000000] BRK [0x2c463d000, 0x2c463dfff] PGTABLE
[    0.000000] BRK [0x2c463e000, 0x2c463efff] PGTABLE
[    0.000000] BRK [0x2c463f000, 0x2c463ffff] PGTABLE
[    0.000000] BRK [0x2c4640000, 0x2c4640fff] PGTABLE
[    0.000000] BRK [0x2c4641000, 0x2c4641fff] PGTABLE
[    0.000000] BRK [0x2c4642000, 0x2c4642fff] PGTABLE
[    0.000000] Secure boot could not be determined
[    0.000000] RAMDISK: [mem 0x36f4f000-0x3779efff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000009FDAF000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x000000009FDAF0B0 0000D4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000009FDDCEB8 000114 (v06 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x000000009FDAF218 02DC9C (v02 ALASKA A M I    01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x00000000AEB9DF00 000040
[    0.000000] ACPI: APIC 0x000000009FDDCFD0 0000F4 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000009FDDD0C8 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000009FDDD110 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: WSMT 0x000000009FDE9BA8 000028 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000009FDDD208 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: SSDT 0x000000009FDDD248 0003A3 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000009FDDD5F0 003043 (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000009FDE0638 002611 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x000000009FDE2C50 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000009FDE2C88 0011A2 (v02 INTEL  Ther_Rvp 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000009FDE3E30 000B13 (v02 INTEL  xh_rvp08 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x000000009FDE4948 000042 (v01 ALASKA A M I    00000002      01000013)
[    0.000000] ACPI: SSDT 0x000000009FDE4990 0017AE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x000000009FDE6140 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x000000009FDE61D8 000141 (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000009FDE6320 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000009FDE65C0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000009FDE95C8 000517 (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x000000009FDE9AE0 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x000000009FDE9B18 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: BGRT 0x000000009FDE9B70 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000084effffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x84effc000-0x84effefff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000084effffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000009fdaefff]
[    0.000000]   node   0: [mem 0x000000009fdea000-0x00000000a019dfff]
[    0.000000]   node   0: [mem 0x00000000a01a0000-0x00000000acea3fff]
[    0.000000]   node   0: [mem 0x00000000ae776000-0x00000000ae875fff]
[    0.000000]   node   0: [mem 0x00000000af7a2000-0x00000000af7fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000084effffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000084effffff]
[    0.000000] On node 0 totalpages: 8372066
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 27 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11008 pages used for memmap
[    0.000000]   DMA32 zone: 704453 pages, LIFO batch:31
[    0.000000]   Normal zone: 119744 pages used for memmap
[    0.000000]   Normal zone: 7663616 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 12 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x9fdaf000-0x9fde9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xa019e000-0xa019efff]
[    0.000000] PM: Registered nosave memory: [mem 0xa019f000-0xa019ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xacea4000-0xae760fff]
[    0.000000] PM: Registered nosave memory: [mem 0xae761000-0xae775fff]
[    0.000000] PM: Registered nosave memory: [mem 0xae876000-0xaeb9dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaeb9e000-0xaf72dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf72e000-0xaf7a1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xaf800000-0xafffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb0000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xb0000000-0xdfffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:12 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 -- -- -- -- 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 8241223
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9636a346-bd3f-4a1b-8f9c-764d636146b3 rw
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 32652608K/33488264K available (10252K kernel code, 1241K rwdata, 3220K rodata, 1432K init, 636K bss, 835656K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=12, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31397 entries in 123 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=12.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
[    0.000000] NR_IRQS: 20736, nr_irqs: 2152, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 11 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.001000] APIC: Switch to symmetric I/O mode setup
[    0.002000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.002000] Switched APIC routing to physical flat.
[    0.006000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.011000] tsc: Detected 3700.000 MHz processor
[    0.011000] tsc: Detected 3696.000 MHz TSC
[    0.011000] Calibrating delay loop (skipped), value calculated using timer frequency.. 7392.00 BogoMIPS (lpj=3696000)
[    0.011000] pid_max: default: 32768 minimum: 301
[    0.012028] Security Framework initialized
[    0.012029] Yama: becoming mindful.
[    0.015036] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[    0.016450] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.016499] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.016543] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.016664] CPU: Physical Processor ID: 0
[    0.016665] CPU: Processor Core ID: 0
[    0.016668] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.016668] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.016672] mce: CPU supports 12 MCE banks
[    0.016679] CPU0: Thermal monitoring enabled (TM1)
[    0.016695] process: using mwait in idle threads
[    0.016696] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.016697] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.016697] Spectre V2 : Mitigation: Full generic retpoline
[    0.016698] Spectre V2 : Filling RSB on context switch
[    0.016791] Freeing SMP alternatives memory: 24K
[    0.022288] TSC deadline timer enabled
[    0.022293] smpboot: CPU0: Intel(R) Core(TM) i7-8700K CPU @ 3.70GHz (family: 0x6, model: 0x9e, stepping: 0xa)
[    0.026005] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.026024] ... version:                4
[    0.026025] ... bit width:              48
[    0.026025] ... generic registers:      4
[    0.026026] ... value mask:             0000ffffffffffff
[    0.026026] ... max period:             00007fffffffffff
[    0.026026] ... fixed-purpose events:   3
[    0.026027] ... event mask:             000000070000000f
[    0.028002] Hierarchical SRCU implementation.
[    0.034213] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.036001] smp: Bringing up secondary CPUs ...
[    0.045006] x86: Booting SMP configuration:
[    0.045007] .... node  #0, CPUs:        #1  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
[    0.146143] smp: Brought up 1 node, 12 CPUs
[    0.146143] smpboot: Max logical packages: 1
[    0.146143] smpboot: Total of 12 processors activated (88704.00 BogoMIPS)
[    0.147542] devtmpfs: initialized
[    0.147542] x86/mm: Memory block size: 128MB
[    0.149009] PM: Registering ACPI NVS region [mem 0xa019e000-0xa019efff] (4096 bytes)
[    0.149010] PM: Registering ACPI NVS region [mem 0xae876000-0xaeb9dfff] (3309568 bytes)
[    0.149071] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.149071] futex hash table entries: 4096 (order: 6, 262144 bytes)
[    0.149073] pinctrl core: initialized pinctrl subsystem
[    0.149206] RTC time:  0:33:28, date: 02/14/18
[    0.150004] NET: Registered protocol family 16
[    0.150093] cpuidle: using governor ladder
[    0.150093] cpuidle: using governor menu
[    0.150093] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.150093] ACPI: bus type PCI registered
[    0.150093] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.150093] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.150093] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.150099] PCI: Using configuration type 1 for base access
[    0.151023] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.151023] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.151056] ACPI: Added _OSI(Module Device)
[    0.151056] ACPI: Added _OSI(Processor Device)
[    0.151057] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.151058] ACPI: Added _OSI(Processor Aggregator Device)
[    0.153640] ACPI Error: [_SB_.PCI0.RP05.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
[    0.153647] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170831/psobject-252)
[    0.153650] ACPI Error: Method parse/execution failed \_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20170831/psparse-550)
[    0.153985] ACPI Error: [_SB_.PCI0.RP09.PXSX] Namespace lookup failure, AE_NOT_FOUND (20170831/dswload2-191)
[    0.153989] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170831/psobject-252)
[    0.153992] ACPI Error: Method parse/execution failed \_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20170831/psparse-550)
[    0.155268] ACPI: Executed 53 blocks of module-level executable AML code
[    0.169171] ACPI: Dynamic OEM Table Load:
[    0.169176] ACPI: SSDT 0xFFFF9DD9EA1CD800 00077A (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.169373] ACPI: Executed 1 blocks of module-level executable AML code
[    0.170007] ACPI: \_PR_.PR00: _OSC native thermal LVT Acked
[    0.170718] ACPI: Dynamic OEM Table Load:
[    0.170721] ACPI: SSDT 0xFFFF9DD9EA3F3400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.170903] ACPI: Executed 1 blocks of module-level executable AML code
[    0.171040] ACPI: Dynamic OEM Table Load:
[    0.171042] ACPI: SSDT 0xFFFF9DD9E9CC1D80 0000BA (v02 PmRef  Cpu0Hwp  00003000 INTL 20160422)
[    0.171202] ACPI: Executed 1 blocks of module-level executable AML code
[    0.171318] ACPI: Dynamic OEM Table Load:
[    0.171322] ACPI: SSDT 0xFFFF9DD9EA1CB800 000628 (v02 PmRef  HwpLvt   00003000 INTL 20160422)
[    0.171475] ACPI: Executed 1 blocks of module-level executable AML code
[    0.172377] ACPI: Dynamic OEM Table Load:
[    0.172382] ACPI: SSDT 0xFFFF9DD9EA3FD000 000D14 (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.172600] ACPI: Executed 1 blocks of module-level executable AML code
[    0.173136] ACPI: Dynamic OEM Table Load:
[    0.173139] ACPI: SSDT 0xFFFF9DD9EA3F5800 000317 (v02 PmRef  ApHwp    00003000 INTL 20160422)
[    0.173357] ACPI: Executed 1 blocks of module-level executable AML code
[    0.173368] ACPI: Dynamic OEM Table Load:
[    0.173368] ACPI: SSDT 0xFFFF9DD9EA3F1400 00030A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.173368] ACPI: Executed 1 blocks of module-level executable AML code
[    0.177960] ACPI: EC: EC started
[    0.177960] ACPI: EC: interrupt blocked
[    0.177975] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.177976] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.177978] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.177978] ACPI: Interpreter enabled
[    0.178010] ACPI: (supports S0 S3 S4 S5)
[    0.178011] ACPI: Using IOAPIC for interrupt routing
[    0.178040] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.178981] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.181603] ACPI: Power Resource [PG00] (on)
[    0.181903] ACPI: Power Resource [PG01] (on)
[    0.182200] ACPI: Power Resource [PG02] (on)
[    0.204829] ACPI: Power Resource [FN00] (off)
[    0.204903] ACPI: Power Resource [FN01] (off)
[    0.204976] ACPI: Power Resource [FN02] (off)
[    0.205050] ACPI: Power Resource [FN03] (off)
[    0.205122] ACPI: Power Resource [FN04] (off)
[    0.206595] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.206599] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.206776] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.206945] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.206946] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.207874] PCI host bridge to bus 0000:00
[    0.207876] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.207877] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.207878] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.207879] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xdfffffff window]
[    0.207880] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.207881] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.207886] pci 0000:00:00.0: [8086:3ec2] type 00 class 0x060000
[    0.208179] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.208209] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.208349] pci 0000:00:01.1: [8086:1905] type 01 class 0x060400
[    0.208378] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
[    0.208592] pci 0000:00:14.0: [8086:a2af] type 00 class 0x0c0330
[    0.208611] pci 0000:00:14.0: reg 0x10: [mem 0xdf330000-0xdf33ffff 64bit]
[    0.208666] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.208860] pci 0000:00:16.0: [8086:a2ba] type 00 class 0x078000
[    0.208876] pci 0000:00:16.0: reg 0x10: [mem 0xdf34d000-0xdf34dfff 64bit]
[    0.208921] pci 0000:00:16.0: PME# supported from D3hot
[    0.209092] pci 0000:00:17.0: [8086:a282] type 00 class 0x010601
[    0.209106] pci 0000:00:17.0: reg 0x10: [mem 0xdf348000-0xdf349fff]
[    0.209111] pci 0000:00:17.0: reg 0x14: [mem 0xdf34c000-0xdf34c0ff]
[    0.209117] pci 0000:00:17.0: reg 0x18: [io  0xf050-0xf057]
[    0.209123] pci 0000:00:17.0: reg 0x1c: [io  0xf040-0xf043]
[    0.209128] pci 0000:00:17.0: reg 0x20: [io  0xf020-0xf03f]
[    0.209134] pci 0000:00:17.0: reg 0x24: [mem 0xdf34b000-0xdf34b7ff]
[    0.209167] pci 0000:00:17.0: PME# supported from D3hot
[    0.209297] pci 0000:00:1b.0: [8086:a2e7] type 01 class 0x060400
[    0.209353] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.209521] pci 0000:00:1c.0: [8086:a290] type 01 class 0x060400
[    0.209577] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.209728] pci 0000:00:1c.4: [8086:a294] type 01 class 0x060400
[    0.209781] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.209936] pci 0000:00:1d.0: [8086:a298] type 01 class 0x060400
[    0.209987] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.210162] pci 0000:00:1f.0: [8086:a2c9] type 00 class 0x060100
[    0.210374] pci 0000:00:1f.2: [8086:a2a1] type 00 class 0x058000
[    0.210387] pci 0000:00:1f.2: reg 0x10: [mem 0xdf344000-0xdf347fff]
[    0.210550] pci 0000:00:1f.3: [8086:a2f0] type 00 class 0x040300
[    0.210574] pci 0000:00:1f.3: reg 0x10: [mem 0xdf340000-0xdf343fff 64bit]
[    0.210602] pci 0000:00:1f.3: reg 0x20: [mem 0xdf320000-0xdf32ffff 64bit]
[    0.210645] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.210851] pci 0000:00:1f.4: [8086:a2a3] type 00 class 0x0c0500
[    0.210910] pci 0000:00:1f.4: reg 0x10: [mem 0xdf34a000-0xdf34a0ff 64bit]
[    0.210979] pci 0000:00:1f.4: reg 0x20: [io  0xf000-0xf01f]
[    0.211172] pci 0000:00:1f.6: [8086:15b8] type 00 class 0x020000
[    0.211196] pci 0000:00:1f.6: reg 0x10: [mem 0xdf300000-0xdf31ffff]
[    0.211295] pci 0000:00:1f.6: PME# supported from D0 D3hot D3cold
[    0.211435] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.211467] pci 0000:02:00.0: [10de:1b81] type 00 class 0x030000
[    0.211485] pci 0000:02:00.0: reg 0x10: [mem 0xde000000-0xdeffffff]
[    0.211493] pci 0000:02:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.211502] pci 0000:02:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.211508] pci 0000:02:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.211514] pci 0000:02:00.0: reg 0x30: [mem 0xdf000000-0xdf07ffff pref]
[    0.211526] pci 0000:02:00.0: BAR 3: assigned to efifb
[    0.211603] pci 0000:02:00.1: [10de:10f0] type 00 class 0x040300
[    0.211616] pci 0000:02:00.1: reg 0x10: [mem 0xdf080000-0xdf083fff]
[    0.214015] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.214016] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    0.214018] pci 0000:00:01.1:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.214020] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.214090] pci 0000:00:1b.0: PCI bridge to [bus 03]
[    0.214162] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.214240] pci 0000:05:00.0: [1b21:2142] type 00 class 0x0c0330
[    0.214265] pci 0000:05:00.0: reg 0x10: [mem 0xdf200000-0xdf207fff 64bit]
[    0.214308] pci 0000:05:00.0: enabling Extended Tags
[    0.214361] pci 0000:05:00.0: PME# supported from D0
[    0.214417] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.214420] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.214489] pci 0000:06:00.0: [144d:a804] type 00 class 0x010802
[    0.214511] pci 0000:06:00.0: reg 0x10: [mem 0xdf100000-0xdf103fff 64bit]
[    0.214655] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.214658] pci 0000:00:1d.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.216006] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.216056] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.216104] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15)
[    0.216152] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.216200] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.216248] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.216296] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.216345] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.216836] ACPI: EC: interrupt unblocked
[    0.216848] ACPI: EC: event unblocked
[    0.216858] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.216859] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.216902] pci 0000:02:00.0: vgaarb: setting as boot VGA device
[    0.216902] pci 0000:02:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.216902] pci 0000:02:00.0: vgaarb: bridge control possible
[    0.216902] vgaarb: loaded
[    0.216902] EDAC MC: Ver: 3.0.0
[    0.217057] Registered efivars operations
[    0.240958] PCI: Using ACPI for IRQ routing
[    0.268562] PCI: pci_cache_line_size set to 64 bytes
[    0.268607] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.268608] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.268608] e820: reserve RAM buffer [mem 0x9fdaf000-0x9fffffff]
[    0.268609] e820: reserve RAM buffer [mem 0xa019e000-0xa3ffffff]
[    0.268610] e820: reserve RAM buffer [mem 0xacea4000-0xafffffff]
[    0.268610] e820: reserve RAM buffer [mem 0xae876000-0xafffffff]
[    0.268611] e820: reserve RAM buffer [mem 0xaf800000-0xafffffff]
[    0.268612] e820: reserve RAM buffer [mem 0x84f000000-0x84fffffff]
[    0.268660] NetLabel: Initializing
[    0.268661] NetLabel:  domain hash size = 128
[    0.268661] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.268670] NetLabel:  unlabeled traffic allowed by default
[    0.268683] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.268683] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.271016] clocksource: Switched to clocksource hpet
[    0.277119] VFS: Disk quotas dquot_6.6.0
[    0.277128] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.277161] pnp: PnP ACPI init
[    0.277335] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.277338] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277607] pnp 00:01: [dma 0 disabled]
[    0.277637] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.277824] system 00:02: [io  0x0680-0x069f] has been reserved
[    0.277825] system 00:02: [io  0xffff] has been reserved
[    0.277826] system 00:02: [io  0xffff] has been reserved
[    0.277827] system 00:02: [io  0xffff] has been reserved
[    0.277828] system 00:02: [io  0x1800-0x18fe] has been reserved
[    0.277829] system 00:02: [io  0x164e-0x164f] has been reserved
[    0.277831] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277902] system 00:03: [io  0x0800-0x087f] has been reserved
[    0.277904] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.277917] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.277944] system 00:05: [io  0x1854-0x1857] has been reserved
[    0.277947] system 00:05: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.278161] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.278162] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.278163] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.278164] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[    0.278165] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.278166] system 00:06: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.278167] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.278168] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.278169] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.278170] system 00:06: [mem 0xdffe0000-0xdfffffff] has been reserved
[    0.278172] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278205] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.278206] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.278207] system 00:07: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.278208] system 00:07: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.278209] system 00:07: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.278210] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.278211] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.278212] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.278213] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.278215] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.278217] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.278467] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.278469] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.279518] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.279519] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.279520] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.279523] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.280317] pnp: PnP ACPI: found 10 devices
[    0.287488] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.287503] pci 0000:00:1b.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.287504] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.287505] pci 0000:00:1b.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.287512] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 04] add_size 1000
[    0.287513] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 04] add_size 200000 add_align 100000
[    0.287514] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 04] add_size 200000 add_align 100000
[    0.287524] pci 0000:00:1b.0: BAR 14: assigned [mem 0xb0000000-0xb01fffff]
[    0.287528] pci 0000:00:1b.0: BAR 15: assigned [mem 0xb0200000-0xb03fffff 64bit pref]
[    0.287529] pci 0000:00:1c.0: BAR 14: assigned [mem 0xb0400000-0xb05fffff]
[    0.287531] pci 0000:00:1c.0: BAR 15: assigned [mem 0xb0600000-0xb07fffff 64bit pref]
[    0.287532] pci 0000:00:1b.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.287534] pci 0000:00:1c.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.287535] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.287539] pci 0000:00:01.1: PCI bridge to [bus 02]
[    0.287541] pci 0000:00:01.1:   bridge window [io  0xe000-0xefff]
[    0.287542] pci 0000:00:01.1:   bridge window [mem 0xde000000-0xdf0fffff]
[    0.287544] pci 0000:00:01.1:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.287546] pci 0000:00:1b.0: PCI bridge to [bus 03]
[    0.287549] pci 0000:00:1b.0:   bridge window [io  0x2000-0x2fff]
[    0.287552] pci 0000:00:1b.0:   bridge window [mem 0xb0000000-0xb01fffff]
[    0.287554] pci 0000:00:1b.0:   bridge window [mem 0xb0200000-0xb03fffff 64bit pref]
[    0.287558] pci 0000:00:1c.0: PCI bridge to [bus 04]
[    0.287561] pci 0000:00:1c.0:   bridge window [io  0x3000-0x3fff]
[    0.287563] pci 0000:00:1c.0:   bridge window [mem 0xb0400000-0xb05fffff]
[    0.287565] pci 0000:00:1c.0:   bridge window [mem 0xb0600000-0xb07fffff 64bit pref]
[    0.287569] pci 0000:00:1c.4: PCI bridge to [bus 05]
[    0.287572] pci 0000:00:1c.4:   bridge window [mem 0xdf200000-0xdf2fffff]
[    0.287576] pci 0000:00:1d.0: PCI bridge to [bus 06]
[    0.287578] pci 0000:00:1d.0:   bridge window [mem 0xdf100000-0xdf1fffff]
[    0.287583] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.287584] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.287585] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.287586] pci_bus 0000:00: resource 7 [mem 0xb0000000-0xdfffffff window]
[    0.287586] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.287588] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.287589] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdf0fffff]
[    0.287589] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.287590] pci_bus 0000:03: resource 0 [io  0x2000-0x2fff]
[    0.287591] pci_bus 0000:03: resource 1 [mem 0xb0000000-0xb01fffff]
[    0.287592] pci_bus 0000:03: resource 2 [mem 0xb0200000-0xb03fffff 64bit pref]
[    0.287593] pci_bus 0000:04: resource 0 [io  0x3000-0x3fff]
[    0.287594] pci_bus 0000:04: resource 1 [mem 0xb0400000-0xb05fffff]
[    0.287595] pci_bus 0000:04: resource 2 [mem 0xb0600000-0xb07fffff 64bit pref]
[    0.287596] pci_bus 0000:05: resource 1 [mem 0xdf200000-0xdf2fffff]
[    0.287596] pci_bus 0000:06: resource 1 [mem 0xdf100000-0xdf1fffff]
[    0.287720] NET: Registered protocol family 2
[    0.287831] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.288048] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.288119] TCP: Hash tables configured (established 262144 bind 65536)
[    0.288149] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[    0.288199] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[    0.288265] NET: Registered protocol family 1
[    0.288444] pci 0000:02:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.288584] PCI: CLS 64 bytes, default 64
[    0.288603] Unpacking initramfs...
[    0.361225] Freeing initrd memory: 8512K
[    0.361229] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.361231] software IO TLB [mem 0x9bdaf000-0x9fdaf000] (64MB) mapped at [000000006a0e95f7-00000000772f8cf4]
[    0.361246] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a8d280fdb9, max_idle_ns: 881591151302 ns
[    0.361584] Scanning for low memory corruption every 60 seconds
[    0.361620] simple-framebuffer simple-framebuffer.0: framebuffer at 0xd1000000, 0x300000 bytes, mapped to 0x000000007ce60c83
[    0.361621] simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=1024x768x32, linelength=4096
[    0.363815] Console: switching to colour frame buffer device 128x48
[    0.365934] simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
[    0.366329] Initialise system trusted keyrings
[    0.366335] Key type blacklist registered
[    0.366414] workingset: timestamp_bits=44 max_order=23 bucket_order=0
[    0.366976] zbud: loaded
[    0.370480] Key type asymmetric registered
[    0.370481] Asymmetric key parser 'x509' registered
[    0.370504] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.370582] io scheduler noop registered
[    0.370583] io scheduler deadline registered
[    0.370606] io scheduler cfq registered (default)
[    0.370607] io scheduler mq-deadline registered
[    0.370607] io scheduler kyber registered
[    0.370620] io scheduler bfq registered
[    0.371663] pcieport 0000:00:1c.4: AER enabled with IRQ 120
[    0.371678] pcieport 0000:00:1d.0: AER enabled with IRQ 121
[    0.371713] intel_idle: MWAIT substates: 0x11142120
[    0.371714] intel_idle: v0.4.1 model 0x9E
[    0.372405] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.372453] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    0.372462] ACPI: Sleep Button [SLPB]
[    0.372480] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.372487] ACPI: Power Button [PWRB]
[    0.372506] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.372571] ACPI: Power Button [PWRF]
[    0.403855] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    0.433238] thermal LNXTHERM:00: registered as thermal_zone0
[    0.433239] ACPI: Thermal Zone [TZ00] (28 C)
[    0.433367] thermal LNXTHERM:01: registered as thermal_zone1
[    0.433367] ACPI: Thermal Zone [TZ01] (30 C)
[    0.433542] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.454504] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.456295] nvme nvme0: pci function 0000:06:00.0
[    0.456328] intel_pstate: Intel P-state driver initializing
[    0.457539] intel_pstate: HWP enabled
[    0.458301] ledtrig-cpu: registered to indicate activity on CPUs
[    0.458481] NET: Registered protocol family 10
[    0.462025] Segment Routing with IPv6
[    0.462033] NET: Registered protocol family 17
[    0.463323] RAS: Correctable Errors collector initialized.
[    0.463375] microcode: sig=0x906ea, pf=0x2, revision=0x80
[    0.463833] microcode: Microcode Update Driver: v2.2.
[    0.463838] sched_clock: Marking stable (463822466, 0)->(516501838, -52679372)
[    0.464729] registered taskstats version 1
[    0.464732] Loading compiled-in X.509 certificates
[    0.464743] zswap: loaded using pool lzo/zbud
[    0.466896] Key type big_key registered
[    0.467686]   Magic number: 6:53:557
[    0.467691] clockevents clockevent8: hash matches
[    0.467738] hctosys: unable to open rtc device (rtc0)
[    0.468708] Freeing unused kernel memory: 1432K
[    0.468709] Write protecting the kernel read-only data: 16384k
[    0.469165] Freeing unused kernel memory: 2016K
[    0.470161] Freeing unused kernel memory: 876K
[    0.593904] SCSI subsystem initialized
[    0.595400] ACPI: bus type USB registered
[    0.595409] usbcore: registered new interface driver usbfs
[    0.595413] usbcore: registered new interface driver hub
[    0.595443] usbcore: registered new device driver usb
[    0.596796] libata version 3.00 loaded.
[    0.598264] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.598267] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.599450] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
[    0.599462] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.599674] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.599675] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.599675] usb usb1: Product: xHCI Host Controller
[    0.599676] usb usb1: Manufacturer: Linux 4.15.2-2-ARCH xhci-hcd
[    0.599677] usb usb1: SerialNumber: 0000:00:14.0
[    0.599753] hub 1-0:1.0: USB hub found
[    0.599789] hub 1-0:1.0: 16 ports detected
[    0.601187] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.601189] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.601213] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.601214] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.601215] usb usb2: Product: xHCI Host Controller
[    0.601216] usb usb2: Manufacturer: Linux 4.15.2-2-ARCH xhci-hcd
[    0.601216] usb usb2: SerialNumber: 0000:00:14.0
[    0.601289] hub 2-0:1.0: USB hub found
[    0.601314] hub 2-0:1.0: 10 ports detected
[    0.602247] ahci 0000:00:17.0: version 3.0
[    0.602401] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.602403] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[    0.602605] pcieport 0000:00:1c.4: AER: Corrected error received: id=00e4
[    0.602627] pcieport 0000:00:1c.4: PCIe Bus Error: severity=Corrected, type=Physical Layer, id=00e4(Receiver ID)
[    0.602677] pcieport 0000:00:1c.4:   device [8086:a294] error status/mask=00000001/00002000
[    0.602681] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    0.602683] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst 
[    0.602713] pcieport 0000:00:1c.4:    [ 0] Receiver Error         (First)
[    0.617497] scsi host0: ahci
[    0.617626] scsi host1: ahci
[    0.617739] scsi host2: ahci
[    0.617886] scsi host3: ahci
[    0.618046] scsi host4: ahci
[    0.618204] scsi host5: ahci
[    0.618234] ata1: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b100 irq 124
[    0.618235] ata2: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b180 irq 124
[    0.618237] ata3: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b200 irq 124
[    0.618239] ata4: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b280 irq 124
[    0.618241] ata5: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b300 irq 124
[    0.618242] ata6: SATA max UDMA/133 abar m2048@0xdf34b000 port 0xdf34b380 irq 124
[    0.657260] xhci_hcd 0000:05:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x00000010
[    0.657404] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.657405] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.657406] usb usb3: Product: xHCI Host Controller
[    0.657407] usb usb3: Manufacturer: Linux 4.15.2-2-ARCH xhci-hcd
[    0.657407] usb usb3: SerialNumber: 0000:05:00.0
[    0.657500] hub 3-0:1.0: USB hub found
[    0.657504] hub 3-0:1.0: 2 ports detected
[    0.657598] xhci_hcd 0000:05:00.0: xHCI Host Controller
[    0.657600] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[    0.657601] xhci_hcd 0000:05:00.0: Host supports USB 3.1 Enhanced SuperSpeed
[    0.657625] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.657636] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    0.657637] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.657638] usb usb4: Product: xHCI Host Controller
[    0.657638] usb usb4: Manufacturer: Linux 4.15.2-2-ARCH xhci-hcd
[    0.657639] usb usb4: SerialNumber: 0000:05:00.0
[    0.657728] hub 4-0:1.0: USB hub found
[    0.657738] hub 4-0:1.0: 2 ports detected
[    0.688325]  nvme0n1: p1 p2 p3
[    0.921316] usb 2-4: new SuperSpeed USB device number 2 using xhci_hcd
[    0.925738] ata3: SATA link down (SStatus 4 SControl 300)
[    0.925771] ata2: SATA link down (SStatus 4 SControl 300)
[    0.925816] ata1: SATA link down (SStatus 4 SControl 300)
[    0.925864] ata4: SATA link down (SStatus 4 SControl 300)
[    0.925912] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.925961] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.929618] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.929626] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.929632] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.929709] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.929715] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.929721] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.930290] ata6.00: ATA-9: WDC WD20EZRZ-00Z5HB0, 80.00A80, max UDMA/133
[    0.930295] ata6.00: 3907029168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.930372] ata5.00: ATA-10: WDC WD40EZRZ-00GXCB0, 80.00A80, max UDMA/133
[    0.930378] ata5.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.934056] ata6.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.934063] ata6.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.934069] ata6.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.934127] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[    0.934133] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[    0.934138] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[    0.934737] ata6.00: configured for UDMA/133
[    0.934767] ata5.00: configured for UDMA/133
[    0.935275] scsi 4:0:0:0: Direct-Access     ATA      WDC WD40EZRZ-00G 0A80 PQ: 0 ANSI: 5
[    0.935845] usb 2-4: New USB device found, idVendor=05e3, idProduct=0743
[    0.935853] usb 2-4: New USB device strings: Mfr=3, Product=4, SerialNumber=5
[    0.935859] usb 2-4: Product: USB Storage
[    0.935865] usb 2-4: Manufacturer: Generic
[    0.935870] usb 2-4: SerialNumber: 000000000819
[    0.936302] scsi 5:0:0:0: Direct-Access     ATA      WDC WD20EZRZ-00Z 0A80 PQ: 0 ANSI: 5
[    0.952905] usb-storage 2-4:1.0: USB Mass Storage device detected
[    0.953301] scsi host6: usb-storage 2-4:1.0
[    0.953467] usbcore: registered new interface driver usb-storage
[    0.954882] sd 4:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.64 TiB)
[    0.954888] sd 4:0:0:0: [sda] 4096-byte physical blocks
[    0.954931] sd 5:0:0:0: [sdb] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    0.954936] sd 5:0:0:0: [sdb] 4096-byte physical blocks
[    0.954992] sd 4:0:0:0: [sda] Write Protect is off
[    0.954995] sd 5:0:0:0: [sdb] Write Protect is off
[    0.955048] sd 5:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    0.955051] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.955186] sd 5:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.955201] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.955294] usbcore: registered new interface driver uas
[    1.003707]  sda: sda1 sda2
[    1.005419] sd 4:0:0:0: [sda] Attached SCSI disk
[    1.031582]  sdb: sdb1
[    1.033267] sd 5:0:0:0: [sdb] Attached SCSI disk
[    1.048099] usb 1-5: new full-speed USB device number 2 using xhci_hcd
[    1.185466] usb 1-5: New USB device found, idVendor=046d, idProduct=c29a
[    1.185472] usb 1-5: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    1.185476] usb 1-5: Product: Driving Force GT
[    1.196909] hidraw: raw HID events driver (C) Jiri Kosina
[    1.206159] usbcore: registered new interface driver usbhid
[    1.206161] usbhid: USB HID core driver
[    1.210100] input: Driving Force GT as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:046D:C29A.0001/input/input3
[    1.210222] logitech 0003:046D:C29A.0001: input,hidraw0: USB HID v1.11 Joystick [Driving Force GT] on usb-0000:00:14.0-5/input0
[    1.210242] logitech 0003:046D:C29A.0001: Force feedback support for Logitech Gaming Wheels
[    1.305120] usb 1-11: new full-speed USB device number 3 using xhci_hcd
[    1.367265] clocksource: Switched to clocksource tsc
[    1.375478] EXT4-fs (nvme0n1p2): mounted filesystem with ordered data mode. Opts: (null)
[    1.436634] usb 1-11: New USB device found, idVendor=045e, idProduct=028e
[    1.436640] usb 1-11: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.436644] usb 1-11: Product: Controller
[    1.436649] usb 1-11: Manufacturer: ©Microsoft Corporation
[    1.436652] usb 1-11: SerialNumber: 10130B0
[    1.461648] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.473533] systemd[1]: systemd 237 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    1.486286] systemd[1]: Detected architecture x86-64.
[    1.497029] systemd[1]: Set hostname to <salkay-home>.
[    1.554040] usb 1-13: new high-speed USB device number 4 using xhci_hcd
[    1.564618] random: crng init done
[    1.570340] systemd[1]: Reached target Remote File Systems.
[    1.570550] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.570846] systemd[1]: Created slice System Slice.
[    1.570932] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.571013] systemd[1]: Listening on LVM2 metadata daemon socket.
[    1.571141] systemd[1]: Created slice system-getty.slice.
[    1.571914] systemd[1]: Listening on Process Core Dump Socket.
[    1.585881] EXT4-fs (nvme0n1p2): re-mounted. Opts: data=ordered
[    1.665870] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[    1.673150] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    1.680101] usb 1-13: New USB device found, idVendor=0424, idProduct=2514
[    1.680102] usb 1-13: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.680394] hub 1-13:1.0: USB hub found
[    1.680420] hub 1-13:1.0: 4 ports detected
[    1.787728] input: PC Speaker as /devices/platform/pcspkr/input/input4
[    1.787818] rtc_cmos 00:04: RTC can wake from S4
[    1.788199] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    1.788280] rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.788805] pps_core: LinuxPPS API ver. 1 registered
[    1.788806] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.788878] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.789333] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.789363] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.791248] PTP clock support registered
[    1.791355] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    1.791356] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    1.791357] RAPL PMU: hw unit of domain package 2^-14 Joules
[    1.791357] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    1.791357] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    1.791358] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    1.793621] input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:14.0/usb1/1-11/1-11:1.0/input/input5
[    1.793711] usbcore: registered new interface driver xpad
[    1.808445] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    1.811613] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.811614] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.817510] AVX2 version of gcm_enc/dec engaged.
[    1.817512] AES CTR mode by8 optimization enabled
[    1.817818] Adding 19322876k swap on /dev/sda2.  Priority:-2 extents:1 across:19322876k FS
[    1.819187] asus_wmi: ASUS WMI generic driver loaded
[    1.819211] iTCO_vendor_support: vendor-support=0
[    1.819867] asus_wmi: Initialization: 0x0
[    1.819875] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    1.819897] asus_wmi: BIOS WMI version: 0.9
[    1.820000] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    1.820022] asus_wmi: SFUN value: 0x0
[    1.820244] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.820440] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input6
[    1.820685] asus_wmi: Number of fans: 1
[    1.822229] ipmi message handler version 39.2
[    1.823219] ipmi device interface
[    1.824483] e1000e 0000:00:1f.6: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.827492] Linux agpgart interface v0.103
[    1.865334] EXT4-fs (nvme0n1p3): mounted filesystem with ordered data mode. Opts: data=ordered
[    1.880236] kvm: disabled by bios
[    1.887224] intel_rapl: Found RAPL domain package
[    1.887225] intel_rapl: Found RAPL domain core
[    1.887226] intel_rapl: Found RAPL domain dram
[    1.923299] kvm: disabled by bios
[    1.938419] nvidia: loading out-of-tree module taints kernel.
[    1.938423] nvidia: module license 'NVIDIA' taints kernel.
[    1.938424] Disabling lock debugging due to kernel taint
[    1.963009] usb 1-13.1: new full-speed USB device number 5 using xhci_hcd
[    1.975878] kvm: disabled by bios
[    1.981476] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[    1.981666] nvidia 0000:02:00.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=none:owns=io+mem
[    1.981715] NVRM: loading NVIDIA UNIX x86_64 Kernel Module  390.25  Wed Jan 24 20:02:43 PST 2018 (using threaded interrupts)
[    2.019724] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  390.25  Wed Jan 24 19:29:37 PST 2018
[    2.021874] [drm] [nvidia-drm] [GPU ID 0x00000200] Loading driver
[    2.021875] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:02:00.0 on minor 0
[    2.023858] scsi 6:0:0:0: Direct-Access     Generic  STORAGE DEVICE   0819 PQ: 0 ANSI: 6
[    2.024144] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[    2.027578] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[    2.054198] usb 1-13.1: New USB device found, idVendor=0e6a, idProduct=030c
[    2.054204] usb 1-13.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.054209] usb 1-13.1: Product: Truly Ergonomic Computer Keyboard
[    2.054213] usb 1-13.1: Manufacturer: TrulyErgonomic.com
[    2.060645] e1000e 0000:00:1f.6 0000:00:1f.6 (uninitialized): registered PHC clock
[    2.076734] input: TrulyErgonomic.com Truly Ergonomic Computer Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.0/0003:0E6A:030C.0002/input/input7
[    2.098213] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: data=ordered
[    2.105749] systemd-journald[301]: Received request to flush runtime journal from PID 1
[    2.128221] hid-generic 0003:0E6A:030C.0002: input,hidraw1: USB HID v1.11 Keyboard [TrulyErgonomic.com Truly Ergonomic Computer Keyboard] on usb-0000:00:14.0-13.1/input0
[    2.128283] input: TrulyErgonomic.com Truly Ergonomic Computer Keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.1/1-13.1:1.1/0003:0E6A:030C.0003/input/input8
[    2.132972] e1000e 0000:00:1f.6 eth0: (PCI Express:2.5GT/s:Width x1) b0:6e:bf:ba:7a:52
[    2.132979] e1000e 0000:00:1f.6 eth0: Intel(R) PRO/1000 Network Connection
[    2.133037] e1000e 0000:00:1f.6 eth0: MAC: 12, PHY: 12, PBA No: FFFFFF-0FF
[    2.133286] snd_hda_intel 0000:02:00.1: Disabling MSI
[    2.133291] snd_hda_intel 0000:02:00.1: Handle vga_switcheroo audio client
[    2.133857] e1000e 0000:00:1f.6 enp0s31f6: renamed from eth0
[    2.136041] usb 1-13.2: new low-speed USB device number 6 using xhci_hcd
[    2.151130] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
[    2.151132] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.151134] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.151135] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.151136] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x1e/0x0
[    2.151137] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.151138] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.151139] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.151140] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.163672] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    2.180123] hid-generic 0003:0E6A:030C.0003: input,hidraw2: USB HID v1.11 Device [TrulyErgonomic.com Truly Ergonomic Computer Keyboard] on usb-0000:00:14.0-13.1/input1
[    2.180174] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    2.180215] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    2.180256] input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    2.180295] input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1f.3/sound/card0/input13
[    2.180332] input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1f.3/sound/card0/input14
[    2.180377] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input15
[    2.228707] usb 1-13.2: New USB device found, idVendor=1bcf, idProduct=0005
[    2.228710] usb 1-13.2: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    2.228711] usb 1-13.2: Product: USB Optical Mouse
[    2.234439] input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13.2/1-13.2:1.0/0003:1BCF:0005.0004/input/input16
[    2.234563] hid-generic 0003:1BCF:0005.0004: input,hidraw3: USB HID v1.10 Mouse [USB Optical Mouse] on usb-0000:00:14.0-13.2/input0
[    2.241093] mousedev: PS/2 mouse device common for all mice
[    2.418766] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input17
[    2.418952] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input18
[    2.419090] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input19
[    2.419207] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.1/0000:02:00.1/sound/card1/input20
[    3.674657] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[    3.863378] IPv6: ADDRCONF(NETDEV_UP): enp0s31f6: link is not ready
[   12.676610] nvidia-modeset: Allocated GPU:0 (GPU-cfa49da4-8c7c-62af-45f8-18e25fe77a08) @ PCI:0000:02:00.0
[   23.404286] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
[   23.404294] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[   23.404367] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s31f6: link becomes ready
[   29.727949] e1000e: enp0s31f6 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None
[   29.727958] e1000e 0000:00:1f.6 enp0s31f6: 10/100 speed: disabling TSO
[   29.805553] tun: Universal TUN/TAP device driver, 1.6
[   91.463157] input: Microsoft X-Box 360 pad as /devices/virtual/input/input21
[  110.785880] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[  411.977152] traps: xss-lock[782] trap int3 ip:7f950319d982 sp:7ffc58794ac0 error:0 in libglib-2.0.so.0.5400.3[7f950314d000+113000]
[  412.114340] nvidia-modeset: Freed GPU:0 (GPU-cfa49da4-8c7c-62af-45f8-18e25fe77a08) @ PCI:0000:02:00.0
[  454.951831] nvidia-modeset: Allocated GPU:0 (GPU-cfa49da4-8c7c-62af-45f8-18e25fe77a08) @ PCI:0000:02:00.0

=EDIT=
I'm assuming that the XFCE results mean that the xterm experiment is unnecessary. However, FWIW I tried this as well.

From the TTY, I ran startx xterm, but it just launched KDE as normal. I wasn't sure if that was due to ~/.xinitrc, which contained exec startkde, so I tried removing this file. However, startx xterm just failed with the following output.

X.Org X Server 1.19.6
Release Date: 2017-12-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.14.12-1-ARCH x86_64 
Current Operating System: Linux salkay-home 4.15.3-1-ARCH #1 SMP PREEMPT Mon Feb 12 23:01:17 UTC 2018 x86_64
Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=9636a346-bd3f-4a1b-8f9c-764d636146b3 rw
Build Date: 26 January 2018  10:25:18AM
 
Current version of pixman: 0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Feb 14 11:59:44 2018
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
The XKEYBOARD keymap compiler (xkbcomp) reports:
> Warning:          Multiple definitions of the KEYPAD key type
>                   Earlier definition ignored
> Warning:          Multiple definitions of the FOUR_LEVEL_KEYPAD key type
>                   Earlier definition ignored
> Warning:          Symbol map for key <RALT> redefined
>                   Using last definition for conflicting fields
Errors from xkbcomp are not fatal to the X server
xterm: Explicit shell already was /usr/bin/xterm
xterm: bad command line option "xterm"

usage:  xterm [-/+132] [-C] [-Sccn] [-T string] [-/+ah] [-/+ai] [-/+aw]
    [-b number] [-baudrate rate] [-/+bc] [-bcf milliseconds]
    [-bcn milliseconds] [-bd color] [-/+bdc] [-bg color] [-bw number] [-/+cb]
    [-cc classrange] [-/+cjk_width] [-class string] [-/+cm] [-/+cn] [-cr color]
    [-/+cu] [-/+dc] [-display displayname] [-e command args ...] [-fa pattern]
    [-fb fontname] [-/+fbb] [-/+fbx] [-fd pattern] [-fg color] [-fi fontname]
    [-fn fontname] [-fs size] [-/+fullscreen] [-fw fontname] [-fwb fontname]
    [-fx fontname] [%geom] [#geom] [-geometry geom] [-help] [-/+hm] [-/+hold]
    [-iconic] [-/+ie] [-/+im] [-into windowId] [-/+itc] [-/+j] [-/+k8]
    [-kt keyboardtype] [-/+l] [-/+lc] [-lcc path] [-leftbar] [-lf filename]
    [-/+ls] [-/+maximized] [-/+mb] [-mc milliseconds] [-/+mesg] [-/+mk_width]
    [-ms color] [-n string] [-name string] [-nb number] [-/+nul] [-/+pc]
    [-/+pob] [-report-charclass] [-report-colors] [-report-fonts] [-rightbar]
    [-/+rv] [-/+rvc] [-/+rw] [-/+s] [-/+samename] [-/+sb] [-selbg color]
    [-selfg color] [-/+sf] [-sh number] [-/+si] [-/+sk] [-sl number] [-/+sm]
    [-/+sp] [-/+t] [-ti termid] [-title string] [-tm string] [-tn name] [-/+u8]
    [-/+uc] [-/+ulc] [-/+ulit] [-/+ut] [-/+vb] [-version] [-/+wc] [-/+wf]
    [-xrm resourcestring] [-ziconbeep percent]

Type xterm -help for a full description.

xinit: connection to X server lost

waiting for X server to shut down (II) Server terminated successfully (0). Closing log file.

=EDIT 2=
The other thing is that the crashes appear much more frequently when playing games, i.e. under higher (CPU? GPU?) load. I'm not sure if that is informative, because that's not the only time when it happens.

=EDIT 3=
And on a whim, I experimented with the hardware. About a week ago, I rejigged my USB peripherals. I plugged some devices in permanently, and changed hubs, to the one built into my monitor. I now removed everything except for my keyboard and monitor, which I plugged directly into the case, instead of the monitor hub. It's been super stable now for 30 minutes (while gaming), which is a record! I've previously had issues with USB devices. Also, about a year ago, my previous laptop also crashed constantly with a USB3 hub.

I'll confirm the stability with the minimal setup for a few more days, then try different permutations to isolate the problem. However, why exactly is there a problem with USB devices and Linux (?) or X (?)? Is there a way to use my USB devices however I'd like?

Last edited by Salkay (2018-02-14 07:00:53)

Offline

#20 2018-02-14 07:50:07

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 23,289

Re: [SOLVED] Recent X crashes

Well if your hub is constantly causing you issues it might be that the hub you are using is faulty. FWIW I never had issues with any of my USB ports and both my X and KDE have been stable

Offline

#21 2018-02-14 08:36:24

seth
Member
Registered: 2012-09-03
Posts: 58,981

Re: [SOLVED] Recent X crashes

X isn't prone to crash even if you un/plug random usb devices

removed everything

is that also the XBOX controller?

Please provide a complete Xorg log.

Online

#22 2018-02-14 08:55:36

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

V1del wrote:

Well if your hub is constantly causing you issues it might be that the hub you are using is faulty.

seth wrote:

X isn't prone to crash even if you un/plug random usb devices'

Yes, I was surprised that even if the USB device/hub is faulty, it could cause X to crash. Let me troubleshoot a little more and ascertain exactly which device/hub it is that is causing the crashes.

seth wrote:

removed everything

is that also the XBOX controller?

Yes, the only things connected are my keyboard and mouse.

seth wrote:

Please provide a complete Xorg log.

Do you mean a log of a crash? Or of a stable session?

Offline

#23 2018-02-14 08:58:18

seth
Member
Registered: 2012-09-03
Posts: 58,981

Re: [SOLVED] Recent X crashes

I meant whether the controller was among the things you removed.
Both. Though I know which things I want to look for in the crashy scenario, comparism might highlight something in case the other things are not there ;-)

Online

#24 2018-02-14 09:02:02

Salkay
Member
Registered: 2014-05-22
Posts: 636

Re: [SOLVED] Recent X crashes

seth wrote:

I meant whether the controller was among the things you removed.

I get the feeling I'm missing something, but yes, I removed it, leaving only the keyboard and mouse connected.

seth wrote:

Both. Though I know which things I want to look for in the crashy scenario, comparism might highlight something in case the other things are not there ;-)

Okay sounds good. Just give me a few days to confirm which the stable and unstable USB configurations are, then I'll post the logs up.

Thanks again for all your help, seth, and you too, V1del.

=EDIT=
It crashed again. Ugh.

Last edited by Salkay (2018-02-14 09:04:37)

Offline

#25 2018-02-14 09:03:30

seth
Member
Registered: 2012-09-03
Posts: 58,981

Re: [SOLVED] Recent X crashes

The point would be that is indeed *was* there when things crashed.

Online

Board footer

Powered by FluxBB