You are not logged in.

#1 2018-02-07 02:16:02

cmos3511
Member
Registered: 2012-12-19
Posts: 6

Xorg freezes on amdgpu usage

Xorg freezes when running Firefox or Chromium with hardware acceleration, no keyboard, no screen update, no input responding and only mouse cursor can move.

It can be logged into by ssh remotely, dmesg and journalctl provided nothing special about the freezing, meanwhile the gpu temperature continues go high to reach the shutdown threshold.

The remote reboot/poweroff cmds do not take effects and I have to use the power button to shutdown it.

If using xterm or Chromium without hardware acceleration, Xorg does not freeze, as far as I see.

I guess the issue is due to the open source amdgpu driver, because Chromium without hardware acceleration is not going to use gpu process.

This issue occurs for both kernel 4.14 and 4.15.

dmesg:

[    0.000000] Linux version 4.15.1-2-ARCH (builduser@heftig-16767) (gcc version 7.3.0 (GCC)) #1 SMP Sun Feb 4 22:27:45 UTC 2018
[    0.000000] Command line: root=/dev/sda2 rw initrd=/initramfs-linux.img amd_iommu=on iommu=pt amdgpu.dc=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000dd37bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd37c000-0x00000000dd45dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000dd45e000-0x00000000dd847fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000dd848000-0x00000000dd915fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000dd916000-0x00000000ddc7dfff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ddc7e000-0x00000000deffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe700000-0x00000000fe7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x00000003feffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000003ff000000-0x000000041effffff] reserved
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xd59bc018-0xd59cbc57] usable ==> usable
[    0.000000] e820: update [mem 0xd59bc018-0xd59cbc57] usable ==> usable
[    0.000000] e820: update [mem 0xd59b4018-0xd59bbc57] usable ==> usable
[    0.000000] e820: update [mem 0xd59b4018-0xd59bbc57] usable ==> usable
[    0.000000] e820: update [mem 0xd5985018-0xd59b3e57] usable ==> usable
[    0.000000] e820: update [mem 0xd5985018-0xd59b3e57] usable ==> usable
[    0.000000] e820: update [mem 0xd5956018-0xd5984e57] usable ==> usable
[    0.000000] e820: update [mem 0xd5956018-0xd5984e57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000000a0000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000d5956017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d5956018-0x00000000d5984e57] usable
[    0.000000] reserve setup_data: [mem 0x00000000d5984e58-0x00000000d5985017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d5985018-0x00000000d59b3e57] usable
[    0.000000] reserve setup_data: [mem 0x00000000d59b3e58-0x00000000d59b4017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d59b4018-0x00000000d59bbc57] usable
[    0.000000] reserve setup_data: [mem 0x00000000d59bbc58-0x00000000d59bc017] usable
[    0.000000] reserve setup_data: [mem 0x00000000d59bc018-0x00000000d59cbc57] usable
[    0.000000] reserve setup_data: [mem 0x00000000d59cbc58-0x00000000dd37bfff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dd37c000-0x00000000dd45dfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000dd45e000-0x00000000dd847fff] usable
[    0.000000] reserve setup_data: [mem 0x00000000dd848000-0x00000000dd915fff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000dd916000-0x00000000ddc7dfff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ddc7e000-0x00000000deffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000df000000-0x00000000dfffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe700000-0x00000000fe7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000feb80000-0x00000000fec01fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed40000-0x00000000fed44fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fedc0000-0x00000000fedc0fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fedc2000-0x00000000fedc8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000feefffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x00000003feffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000003ff000000-0x000000041effffff] reserved
[    0.000000] efi: EFI v2.50 by American Megatrends
[    0.000000] efi:  ACPI=0xdd8cc000  ACPI 2.0=0xdd8cc000  SMBIOS=0xddba5000  SMBIOS 3.0=0xddba4000  ESRT=0xdc308b18 
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: HPE ProLiant MicroServer Gen10/ProLiant MicroServer Gen10, BIOS 5.12 06/05/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x3ff000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF write-through
[    0.000000]   C0000-EFFFF uncachable
[    0.000000]   F0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000000]   1 base 000080000000 mask FFFFC0000000 write-back
[    0.000000]   2 base 0000C0000000 mask FFFFE0000000 write-back
[    0.000000]   3 base 0000DF000000 mask FFFFFF000000 uncachable
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] TOM2: 000000041f000000 aka 16880M
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] total RAM covered: 3568M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 1G 	num_reg: 3  	lose cover RAM: 0G
[    0.000000] e820: update [mem 0xdf000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xdf000 max_arch_pfn = 0x400000000
[    0.000000] esrt: Reserving ESRT space from 0x00000000dc308b18 to 0x00000000dc308b50.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 98000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x36e637000, 0x36e637fff] PGTABLE
[    0.000000] BRK [0x36e638000, 0x36e638fff] PGTABLE
[    0.000000] BRK [0x36e639000, 0x36e639fff] PGTABLE
[    0.000000] BRK [0x36e63a000, 0x36e63afff] PGTABLE
[    0.000000] BRK [0x36e63b000, 0x36e63bfff] PGTABLE
[    0.000000] BRK [0x36e63c000, 0x36e63cfff] PGTABLE
[    0.000000] BRK [0x36e63d000, 0x36e63dfff] PGTABLE
[    0.000000] BRK [0x36e63e000, 0x36e63efff] PGTABLE
[    0.000000] BRK [0x36e63f000, 0x36e63ffff] PGTABLE
[    0.000000] BRK [0x36e640000, 0x36e640fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7f930000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000DD8CC000 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000DD8CC0A0 0000C4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000DD8D3DA8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20170831/tbfadt-658)
[    0.000000] ACPI: DSDT 0x00000000DD8CC200 007BA1 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000DD90CF00 000040
[    0.000000] ACPI: APIC 0x00000000DD8D3EB8 00007E (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000DD8D3F38 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000DD8D3F80 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000DD8D4020 00003C (v01 ALASKA A M I    01072009 MSFT 00010013)
[    0.000000] ACPI: HPET 0x00000000DD8D4060 000038 (v01 ALASKA A M I    01072009 AMI  00000005)
[    0.000000] ACPI: ASF! 0x00000000DD8D4098 0000D6 (v32 AMD    SB700ASF 00000001 TFSM 000F4240)
[    0.000000] ACPI: UEFI 0x00000000DD8D4170 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: IVRS 0x00000000DD8D41B8 0000D0 (v02 AMD    AGESA    00000001 AMD  00000000)
[    0.000000] ACPI: VFCT 0x00000000DD8D4288 00FC84 (v01 ALASKA A M I    00000001 AMD  31504F47)
[    0.000000] ACPI: BGRT 0x00000000DD8E3F10 000038 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x00000000DD8E3F48 000854 (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DD8E47A0 00888F (v02 AMD    AGESA    00000002 MSFT 04000000)
[    0.000000] ACPI: CRAT 0x00000000DD8ED030 000550 (v01 AMD    AGESA    00000001 AMD  00000001)
[    0.000000] ACPI: SSDT 0x00000000DD8ED580 001492 (v01 AMD    CPMDFIGP 00000001 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000DD8EEA18 00165E (v01 AMD    CPMCMN   00000001 INTL 20120913)
[    0.000000] ACPI: EINJ 0x00000000DD8F0078 000130 (v01 AMI    AMI.EINJ 00000000 AMI. 00000000)
[    0.000000] ACPI: ERST 0x00000000DD8F01A8 000230 (v01 AMIER  AMI.ERST 00000000 AMI. 00000000)
[    0.000000] ACPI: BERT 0x00000000DD8F03D8 000030 (v01 AMI    AMI.BERT 00000000 AMI. 00000000)
[    0.000000] ACPI: HEST 0x00000000DD8F0408 0000A8 (v01 AMI    AMI.HEST 00000000 AMI. 00000000)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000003feffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x3feffc000-0x3feffefff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x00000003feffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000dd37bfff]
[    0.000000]   node   0: [mem 0x00000000dd45e000-0x00000000dd847fff]
[    0.000000]   node   0: [mem 0x00000000ddc7e000-0x00000000deffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x00000003feffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000003feffffff]
[    0.000000] On node 0 totalpages: 4053639
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 23 pages reserved
[    0.000000]   DMA zone: 3999 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14188 pages used for memmap
[    0.000000]   DMA32 zone: 908008 pages, LIFO batch:31
[    0.000000]   Normal zone: 49088 pages used for memmap
[    0.000000]   Normal zone: 3141632 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 97 pages
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.000000] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x10228201 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xd5956000-0xd5956fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd5984000-0xd5984fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd5985000-0xd5985fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd59b3000-0xd59b3fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd59b4000-0xd59b4fff]
[    0.000000] PM: Registered nosave memory: [mem 0xd59bb000-0xd59bbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xd59bc000-0xd59bcfff]
[    0.000000] PM: Registered nosave memory: [mem 0xd59cb000-0xd59cbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd37c000-0xdd45dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd848000-0xdd915fff]
[    0.000000] PM: Registered nosave memory: [mem 0xdd916000-0xddc7dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xdf000000-0xdfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfe6fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe700000-0xfe7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe800000-0xfeb7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeb80000-0xfec01fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfed7ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed90000-0xfedbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc0000-0xfedc0fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc1000-0xfedc1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc2000-0xfedc8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfedc9000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfeefffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfef00000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xe0000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] percpu: Embedded 45 pages/cpu @        (ptrval) s147456 r8192 d28672 u524288
[    0.000000] pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 3990276
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: root=/dev/sda2 rw initrd=/initramfs-linux.img amd_iommu=on iommu=pt amdgpu.dc=1
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 15748160K/16214556K available (10252K kernel code, 1225K rwdata, 3212K rodata, 1484K init, 636K bss, 466396K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] ftrace: allocating 31341 entries in 123 pages
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.000000] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20170831
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.009000] tsc: Fast TSC calibration using PIT
[    0.010000] tsc: Detected 2095.882 MHz processor
[    0.010000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4191.76 BogoMIPS (lpj=2095882)
[    0.010000] pid_max: default: 32768 minimum: 301
[    0.011087] Security Framework initialized
[    0.011090] Yama: becoming mindful.
[    0.018075] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.021471] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.021609] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.021717] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.022163] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[    0.022175] CPU: Physical Processor ID: 0
[    0.022176] CPU: Processor Core ID: 0
[    0.022189] mce: CPU supports 7 MCE banks
[    0.022203] LVT offset 1 assigned for vector 0xf9
[    0.022215] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.022217] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.022221] Spectre V2 mitigation: Mitigation: Full AMD retpoline
[    0.024040] Freeing SMP alternatives memory: 28K
[    0.033000] smpboot: CPU0: AMD Opteron(tm) X3421 APU (family: 0x15, model: 0x60, stepping: 0x1)
[    0.033000] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.033000] ... version:                0
[    0.033000] ... bit width:              48
[    0.033000] ... generic registers:      6
[    0.033000] ... value mask:             0000ffffffffffff
[    0.033000] ... max period:             00007fffffffffff
[    0.033000] ... fixed-purpose events:   0
[    0.033000] ... event mask:             000000000000003f
[    0.033000] Hierarchical SRCU implementation.
[    0.033415] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.033451] smp: Bringing up secondary CPUs ...
[    0.033648] x86: Booting SMP configuration:
[    0.033650] .... node  #0, CPUs:      #1 #2 #3
[    0.038006] smp: Brought up 1 node, 4 CPUs
[    0.038008] smpboot: Max logical packages: 1
[    0.038012] smpboot: Total of 4 processors activated (16767.05 BogoMIPS)
[    0.040188] devtmpfs: initialized
[    0.040188] x86/mm: Memory block size: 128MB
[    0.043412] PM: Registering ACPI NVS region [mem 0xdd848000-0xdd915fff] (843776 bytes)
[    0.043412] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.043412] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.043412] pinctrl core: initialized pinctrl subsystem
[    0.044111] RTC time: 21:46:22, date: 02/06/18
[    0.044372] NET: Registered protocol family 16
[    0.044850] cpuidle: using governor ladder
[    0.045019] cpuidle: using governor menu
[    0.045127] ACPI: bus type PCI registered
[    0.045130] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.045257] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.045262] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.045274] pmd_set_huge: Cannot satisfy [mem 0xf8000000-0xf8200000] with a huge-page mapping due to MTRR override.
[    0.045451] PCI: Using configuration type 1 for base access
[    0.048124] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.048124] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.049127] ACPI: Added _OSI(Module Device)
[    0.049129] ACPI: Added _OSI(Processor Device)
[    0.049131] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.049132] ACPI: Added _OSI(Processor Aggregator Device)
[    0.075470] ACPI: Interpreter enabled
[    0.075527] ACPI: (supports S0 S5)
[    0.075530] ACPI: Using IOAPIC for interrupt routing
[    0.075672] HEST: Table parsing has been initialized.
[    0.075677] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.076414] ACPI: GPE 0x18 active on init
[    0.076431] ACPI: Enabled 3 GPEs in block 00 to 1F
[    0.097036] ACPI: Power Resource [P0SD] (off)
[    0.097045] ACPI: Power Resource [P3SD] (off)
[    0.099038] ACPI: Power Resource [P0U2] (off)
[    0.099044] ACPI: Power Resource [P3U2] (off)
[    0.100460] ACPI: Power Resource [P0U3] (off)
[    0.100547] ACPI: Power Resource [P3U3] (off)
[    0.101668] ACPI: Power Resource [P0ST] (on)
[    0.101757] ACPI: Power Resource [P3ST] (on)
[    0.115979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.115992] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.116647] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.116683] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[    0.117600] PCI host bridge to bus 0000:00
[    0.117604] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.117607] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.117610] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.117613] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.117616] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.117619] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.117622] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xfed3ffff window]
[    0.117624] pci_bus 0000:00: root bus resource [mem 0xfedca000-0xffffffff window]
[    0.117628] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.117643] pci 0000:00:00.0: [1022:1576] type 00 class 0x060000
[    0.117864] pci 0000:00:00.2: [1022:1577] type 00 class 0x080600
[    0.118079] pci 0000:00:01.0: [1002:9874] type 00 class 0x030000
[    0.118104] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.118116] pci 0000:00:01.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
[    0.118124] pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.118133] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[    0.118141] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[    0.118147] pci 0000:00:01.0: enabling Extended Tags
[    0.118161] pci 0000:00:01.0: BAR 0: assigned to efifb
[    0.118201] pci 0000:00:01.0: supports D1 D2
[    0.118204] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.118378] pci 0000:00:01.1: [1002:9840] type 00 class 0x040300
[    0.118398] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[    0.118422] pci 0000:00:01.1: enabling Extended Tags
[    0.118463] pci 0000:00:01.1: supports D1 D2
[    0.118610] pci 0000:00:02.0: [1022:157b] type 00 class 0x060000
[    0.118784] pci 0000:00:02.2: [1022:157c] type 01 class 0x060400
[    0.118833] pci 0000:00:02.2: enabling Extended Tags
[    0.118883] pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
[    0.119059] pci 0000:00:02.5: [1022:157c] type 01 class 0x060400
[    0.119101] pci 0000:00:02.5: enabling Extended Tags
[    0.119150] pci 0000:00:02.5: PME# supported from D0 D3hot D3cold
[    0.119323] pci 0000:00:03.0: [1022:157b] type 00 class 0x060000
[    0.119519] pci 0000:00:08.0: [1022:1578] type 00 class 0x108000
[    0.119539] pci 0000:00:08.0: reg 0x10: [mem 0xf0900000-0xf091ffff 64bit pref]
[    0.119547] pci 0000:00:08.0: reg 0x18: [mem 0xfe800000-0xfe8fffff]
[    0.119555] pci 0000:00:08.0: reg 0x1c: [mem 0xfeb6f000-0xfeb6ffff]
[    0.119567] pci 0000:00:08.0: reg 0x24: [mem 0xfeb6a000-0xfeb6bfff]
[    0.119740] pci 0000:00:09.0: [1022:157d] type 00 class 0x060000
[    0.119941] pci 0000:00:10.0: [1022:7914] type 00 class 0x0c0330
[    0.119974] pci 0000:00:10.0: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[    0.120094] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.120264] pci 0000:00:11.0: [1022:7901] type 00 class 0x010601
[    0.120289] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.120300] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.120311] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.120321] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.120332] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.120343] pci 0000:00:11.0: reg 0x24: [mem 0xfeb6d000-0xfeb6d3ff]
[    0.120391] pci 0000:00:11.0: PME# supported from D3hot
[    0.120564] pci 0000:00:12.0: [1022:7908] type 00 class 0x0c0320
[    0.120588] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff]
[    0.120676] pci 0000:00:12.0: supports D1 D2
[    0.120679] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.120832] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500
[    0.121054] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100
[    0.121279] pci 0000:00:18.0: [1022:1570] type 00 class 0x060000
[    0.121437] pci 0000:00:18.1: [1022:1571] type 00 class 0x060000
[    0.121590] pci 0000:00:18.2: [1022:1572] type 00 class 0x060000
[    0.121751] pci 0000:00:18.3: [1022:1573] type 00 class 0x060000
[    0.121912] pci 0000:00:18.4: [1022:1574] type 00 class 0x060000
[    0.122066] pci 0000:00:18.5: [1022:1575] type 00 class 0x060000
[    0.122355] pci 0000:01:00.0: [1b4b:9230] type 00 class 0x010601
[    0.122380] pci 0000:01:00.0: reg 0x10: [io  0xe050-0xe057]
[    0.122394] pci 0000:01:00.0: reg 0x14: [io  0xe040-0xe043]
[    0.122407] pci 0000:01:00.0: reg 0x18: [io  0xe030-0xe037]
[    0.122419] pci 0000:01:00.0: reg 0x1c: [io  0xe020-0xe023]
[    0.122431] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe01f]
[    0.122445] pci 0000:01:00.0: reg 0x24: [mem 0xfea40000-0xfea407ff]
[    0.122458] pci 0000:01:00.0: reg 0x30: [mem 0xfea00000-0xfea3ffff pref]
[    0.122481] pci 0000:01:00.0: Enabling fixed DMA alias to 00.1
[    0.122555] pci 0000:01:00.0: PME# supported from D3hot
[    0.126099] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.126111] pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
[    0.126116] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.126318] pci 0000:02:00.0: [14e4:165f] type 00 class 0x020000
[    0.126362] pci 0000:02:00.0: reg 0x10: [mem 0xf0850000-0xf085ffff 64bit pref]
[    0.126381] pci 0000:02:00.0: reg 0x18: [mem 0xf0840000-0xf084ffff 64bit pref]
[    0.126400] pci 0000:02:00.0: reg 0x20: [mem 0xf0830000-0xf083ffff 64bit pref]
[    0.126413] pci 0000:02:00.0: reg 0x30: [mem 0xfe940000-0xfe97ffff pref]
[    0.126549] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.126712] pci 0000:02:00.1: [14e4:165f] type 00 class 0x020000
[    0.126757] pci 0000:02:00.1: reg 0x10: [mem 0xf0820000-0xf082ffff 64bit pref]
[    0.126776] pci 0000:02:00.1: reg 0x18: [mem 0xf0810000-0xf081ffff 64bit pref]
[    0.126794] pci 0000:02:00.1: reg 0x20: [mem 0xf0800000-0xf080ffff 64bit pref]
[    0.126808] pci 0000:02:00.1: reg 0x30: [mem 0xfe900000-0xfe93ffff pref]
[    0.126905] pci 0000:02:00.1: PME# supported from D0 D3hot D3cold
[    0.130078] pci 0000:00:02.5: PCI bridge to [bus 02]
[    0.130092] pci 0000:00:02.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.130099] pci 0000:00:02.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.131594] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 5 7 10 11 14 15) *0
[    0.131741] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 5 7 10 11 14 15) *0
[    0.131873] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 5 7 10 11 14 15) *0
[    0.132030] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 5 7 10 11 14 15) *0
[    0.132169] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 5 7 10 11 14 15) *0
[    0.132287] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 5 7 10 11 14 15) *0
[    0.132404] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 5 7 10 11 14 15) *0
[    0.132520] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 5 7 10 11 14 15) *0
[    0.134516] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.134516] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.134516] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.134516] vgaarb: loaded
[    0.145162] EDAC MC: Ver: 3.0.0
[    0.145303] Registered efivars operations
[    0.172870] PCI: Using ACPI for IRQ routing
[    0.175164] PCI: pci_cache_line_size set to 64 bytes
[    0.175259] e820: reserve RAM buffer [mem 0xd5956018-0xd7ffffff]
[    0.175269] e820: reserve RAM buffer [mem 0xd5985018-0xd7ffffff]
[    0.175271] e820: reserve RAM buffer [mem 0xd59b4018-0xd7ffffff]
[    0.175273] e820: reserve RAM buffer [mem 0xd59bc018-0xd7ffffff]
[    0.175274] e820: reserve RAM buffer [mem 0xdd37c000-0xdfffffff]
[    0.175276] e820: reserve RAM buffer [mem 0xdd848000-0xdfffffff]
[    0.175278] e820: reserve RAM buffer [mem 0xdf000000-0xdfffffff]
[    0.175280] e820: reserve RAM buffer [mem 0x3ff000000-0x3ffffffff]
[    0.175488] NetLabel: Initializing
[    0.175489] NetLabel:  domain hash size = 128
[    0.175490] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.175517] NetLabel:  unlabeled traffic allowed by default
[    0.175583] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.175583] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.178131] clocksource: Switched to clocksource hpet
[    0.201792] VFS: Disk quotas dquot_6.6.0
[    0.201835] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.201970] pnp: PnP ACPI init
[    0.202343] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.202354] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.202518] system 00:01: [mem 0xc0000000-0xdfffffff] could not be reserved
[    0.202526] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.202691] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.202699] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.203422] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.203935] pnp 00:04: disabling [mem 0xfeb00000-0xfeb00fff] because it overlaps 0000:00:01.0 BAR 5 [mem 0xfeb00000-0xfeb3ffff]
[    0.204080] system 00:04: [io  0x04d0-0x04d1] has been reserved
[    0.204083] system 00:04: [io  0x040b] has been reserved
[    0.204087] system 00:04: [io  0x04d6] has been reserved
[    0.204090] system 00:04: [io  0x0c00-0x0c01] has been reserved
[    0.204093] system 00:04: [io  0x0c14] has been reserved
[    0.204096] system 00:04: [io  0x0c50-0x0c51] has been reserved
[    0.204099] system 00:04: [io  0x0c52] has been reserved
[    0.204102] system 00:04: [io  0x0c6c] has been reserved
[    0.204105] system 00:04: [io  0x0c6f] has been reserved
[    0.204108] system 00:04: [io  0x0cd0-0x0cd1] has been reserved
[    0.204111] system 00:04: [io  0x0cd2-0x0cd3] has been reserved
[    0.204113] system 00:04: [io  0x0cd4-0x0cd5] has been reserved
[    0.204116] system 00:04: [io  0x0cd6-0x0cd7] has been reserved
[    0.204119] system 00:04: [io  0x0cd8-0x0cdf] has been reserved
[    0.204122] system 00:04: [io  0x0800-0x089f] has been reserved
[    0.204126] system 00:04: [io  0x0b00-0x0b0f] has been reserved
[    0.204128] system 00:04: [io  0x0b20-0x0b3f] has been reserved
[    0.204131] system 00:04: [io  0x0900-0x090f] has been reserved
[    0.204134] system 00:04: [io  0x0910-0x091f] has been reserved
[    0.204138] system 00:04: [io  0xfe00-0xfefe] has been reserved
[    0.204142] system 00:04: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.204146] system 00:04: [mem 0xfec01000-0xfec01fff] could not be reserved
[    0.204149] system 00:04: [mem 0xfedc0000-0xfedc0fff] has been reserved
[    0.204152] system 00:04: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.204156] system 00:04: [mem 0xfed80000-0xfed8ffff] could not be reserved
[    0.204159] system 00:04: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.204163] system 00:04: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.204166] system 00:04: [mem 0xff000000-0xffffffff] has been reserved
[    0.204174] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.205629] pnp: PnP ACPI: found 5 devices
[    0.214128] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.214166] pci 0000:00:02.5: bridge window [io  0x1000-0x0fff] to [bus 02] add_size 1000
[    0.214181] pci 0000:00:02.5: BAR 13: assigned [io  0x1000-0x1fff]
[    0.214187] pci 0000:00:02.2: PCI bridge to [bus 01]
[    0.214191] pci 0000:00:02.2:   bridge window [io  0xe000-0xefff]
[    0.214197] pci 0000:00:02.2:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.214206] pci 0000:00:02.5: PCI bridge to [bus 02]
[    0.214209] pci 0000:00:02.5:   bridge window [io  0x1000-0x1fff]
[    0.214215] pci 0000:00:02.5:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.214219] pci 0000:00:02.5:   bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.214229] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.214232] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.214234] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.214237] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.214240] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.214243] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.214246] pci_bus 0000:00: resource 10 [mem 0xe0000000-0xfed3ffff window]
[    0.214249] pci_bus 0000:00: resource 11 [mem 0xfedca000-0xffffffff window]
[    0.214252] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.214255] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.214258] pci_bus 0000:02: resource 0 [io  0x1000-0x1fff]
[    0.214261] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.214264] pci_bus 0000:02: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[    0.214453] NET: Registered protocol family 2
[    0.214803] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.215294] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.215696] TCP: Hash tables configured (established 131072 bind 65536)
[    0.215815] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.215940] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.216172] NET: Registered protocol family 1
[    0.216210] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.216955] PCI: CLS 0 bytes, default 64
[    0.217077] Unpacking initramfs...
[    0.449051] Freeing initrd memory: 6972K
[    0.449082] AMD-Vi: IOMMU performance counters supported
[    0.449349] pci 0000:00:00.2: can't derive routing for PCI INT A
[    0.449352] pci 0000:00:00.2: PCI INT A: not connected
[    0.449731] iommu: Adding device 0000:00:01.0 to group 0
[    0.449799] iommu: Using direct mapping for device 0000:00:01.0
[    0.449842] iommu: Adding device 0000:00:01.1 to group 0
[    0.449946] iommu: Adding device 0000:00:02.0 to group 1
[    0.449961] iommu: Using direct mapping for device 0000:00:02.0
[    0.449987] iommu: Adding device 0000:00:02.2 to group 1
[    0.450041] iommu: Adding device 0000:00:02.5 to group 1
[    0.450116] iommu: Adding device 0000:00:03.0 to group 2
[    0.450130] iommu: Using direct mapping for device 0000:00:03.0
[    0.450192] iommu: Adding device 0000:00:08.0 to group 3
[    0.450206] iommu: Using direct mapping for device 0000:00:08.0
[    0.450278] iommu: Adding device 0000:00:09.0 to group 4
[    0.450291] iommu: Using direct mapping for device 0000:00:09.0
[    0.450354] iommu: Adding device 0000:00:10.0 to group 5
[    0.450367] iommu: Using direct mapping for device 0000:00:10.0
[    0.450427] iommu: Adding device 0000:00:11.0 to group 6
[    0.450444] iommu: Using direct mapping for device 0000:00:11.0
[    0.450503] iommu: Adding device 0000:00:12.0 to group 7
[    0.450517] iommu: Using direct mapping for device 0000:00:12.0
[    0.450597] iommu: Adding device 0000:00:14.0 to group 8
[    0.450610] iommu: Using direct mapping for device 0000:00:14.0
[    0.450636] iommu: Adding device 0000:00:14.3 to group 8
[    0.450748] iommu: Adding device 0000:00:18.0 to group 9
[    0.450762] iommu: Using direct mapping for device 0000:00:18.0
[    0.450788] iommu: Adding device 0000:00:18.1 to group 9
[    0.450813] iommu: Adding device 0000:00:18.2 to group 9
[    0.450838] iommu: Adding device 0000:00:18.3 to group 9
[    0.450865] iommu: Adding device 0000:00:18.4 to group 9
[    0.450890] iommu: Adding device 0000:00:18.5 to group 9
[    0.450908] iommu: Adding device 0000:01:00.0 to group 1
[    0.450930] iommu: Adding device 0000:02:00.0 to group 1
[    0.450953] iommu: Adding device 0000:02:00.1 to group 1
[    0.451726] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
[    0.451729] AMD-Vi: Extended features (0x37ef22294ada):
[    0.451730]  PPR NX GT IA GA PC GA_vAPIC
[    0.451737] AMD-Vi: Interrupt remapping enabled
[    0.451738] AMD-Vi: virtual APIC enabled
[    0.452061] AMD-Vi: Lazy IO/TLB flushing enabled
[    0.452065] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.452071] software IO TLB [mem 0xd1955000-0xd5955000] (64MB) mapped at [00000000875089ff-0000000075c64154]
[    0.452140] amd_uncore: AMD NB counters detected
[    0.452316] LVT offset 0 assigned for vector 0x400
[    0.452401] perf: AMD IBS detected (0x000007ff)
[    0.452410] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    0.452445] Scanning for low memory corruption every 60 seconds
[    0.453668] Initialise system trusted keyrings
[    0.453690] Key type blacklist registered
[    0.453884] workingset: timestamp_bits=44 max_order=22 bucket_order=0
[    0.456067] zbud: loaded
[    0.460302] Key type asymmetric registered
[    0.460304] Asymmetric key parser 'x509' registered
[    0.460362] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.460479] io scheduler noop registered
[    0.460481] io scheduler deadline registered
[    0.460565] io scheduler cfq registered (default)
[    0.460566] io scheduler mq-deadline registered
[    0.460568] io scheduler kyber registered
[    0.460613] io scheduler bfq registered
[    0.461648] pcieport 0000:00:02.2: Signaling PME with IRQ 26
[    0.461679] pcieport 0000:00:02.5: Signaling PME with IRQ 27
[    0.461716] pciehp 0000:00:02.5:pcie004: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[    0.461802] pciehp 0000:00:02.5:pcie004: Slot(0): Card present
[    0.461860] efifb: probing for efifb
[    0.461911] efifb: framebuffer at 0xe0000000, using 8100k, total 8100k
[    0.461913] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.461914] efifb: scrolling: redraw
[    0.461917] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.469704] Console: switching to colour frame buffer device 240x67
[    0.477233] fb0: EFI VGA frame buffer device
[    0.477364] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.477381] ACPI: Power Button [PWRB]
[    0.477476] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.477699] ACPI: Power Button [PWRF]
[    0.477865] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    0.478521] acpi device:02: registered as cooling_device0
[    0.478601] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2
[    0.479942] ERST: Error Record Serialization Table (ERST) support is initialized.
[    0.479947] pstore: using zlib compression
[    0.479956] pstore: Registered erst as persistent store backend
[    0.480259] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
[    0.480522] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.482681] ledtrig-cpu: registered to indicate activity on CPUs
[    0.483207] NET: Registered protocol family 10
[    0.490315] Segment Routing with IPv6
[    0.490371] NET: Registered protocol family 17
[    0.490874] RAS: Correctable Errors collector initialized.
[    0.491168] microcode: CPU0: patch_level=0x06006118
[    0.491173] microcode: CPU1: patch_level=0x06006118
[    0.491188] microcode: CPU2: patch_level=0x06006118
[    0.491201] microcode: CPU3: patch_level=0x06006118
[    0.491313] microcode: Microcode Update Driver: v2.2.
[    0.491337] sched_clock: Marking stable (491298966, 0)->(587694622, -96395656)
[    0.491760] registered taskstats version 1
[    0.491774] Loading compiled-in X.509 certificates
[    0.491808] zswap: loaded using pool lzo/zbud
[    0.498456] Key type big_key registered
[    0.499057]   Magic number: 6:888:802
[    0.499209] hctosys: unable to open rtc device (rtc0)
[    0.504195] Freeing unused kernel memory: 1484K
[    0.504198] Write protecting the kernel read-only data: 16384k
[    0.505643] Freeing unused kernel memory: 2016K
[    0.509599] Freeing unused kernel memory: 884K
[    0.742754] SCSI subsystem initialized
[    0.744014] ACPI: bus type USB registered
[    0.744113] usbcore: registered new interface driver usbfs
[    0.744137] usbcore: registered new interface driver hub
[    0.744200] usbcore: registered new device driver usb
[    0.755159] libata version 3.00 loaded.
[    0.756122] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    0.756131] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.756138] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[    0.756930] ehci-pci: EHCI PCI platform driver
[    0.861149] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x00000410
[    0.861650] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.861654] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.861657] usb usb1: Product: xHCI Host Controller
[    0.861659] usb usb1: Manufacturer: Linux 4.15.1-2-ARCH xhci-hcd
[    0.861661] usb usb1: SerialNumber: 0000:00:10.0
[    0.861969] hub 1-0:1.0: USB hub found
[    0.861986] hub 1-0:1.0: 4 ports detected
[    0.862375] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    0.862382] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    0.868005] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    0.868068] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.868071] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.868073] usb usb2: Product: xHCI Host Controller
[    0.868076] usb usb2: Manufacturer: Linux 4.15.1-2-ARCH xhci-hcd
[    0.868078] usb usb2: SerialNumber: 0000:00:10.0
[    0.868278] hub 2-0:1.0: USB hub found
[    0.868294] hub 2-0:1.0: 4 ports detected
[    0.868491] usb: port power management may be unreliable
[    0.868732] ahci 0000:00:11.0: version 3.0
[    0.869125] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
[    0.869131] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part 
[    0.869708] scsi host0: ahci
[    0.869831] ata1: SATA max UDMA/133 abar m1024@0xfeb6d000 port 0xfeb6d100 irq 19
[    0.869918] ahci 0000:01:00.0: enabling device (0002 -> 0003)
[    0.870390] ahci 0000:01:00.0: controller can do FBS, turning on CAP_FBS
[    0.870418] ehci-pci 0000:00:12.0: EHCI Host Controller
[    0.870436] ehci-pci 0000:00:12.0: new USB bus registered, assigned bus number 3
[    0.870460] ehci-pci 0000:00:12.0: debug port 2
[    0.870563] ehci-pci 0000:00:12.0: irq 18, io mem 0xfeb6c000
[    0.877198] ehci-pci 0000:00:12.0: USB 2.0 started, EHCI 1.00
[    0.877339] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    0.877343] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.877345] usb usb3: Product: EHCI Host Controller
[    0.877348] usb usb3: Manufacturer: Linux 4.15.1-2-ARCH ehci_hcd
[    0.877350] usb usb3: SerialNumber: 0000:00:12.0
[    0.877677] hub 3-0:1.0: USB hub found
[    0.877689] hub 3-0:1.0: 2 ports detected
[    0.880814] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 8 ports 6 Gbps 0xff impl SATA mode
[    0.880821] ahci 0000:01:00.0: flags: 64bit ncq fbs pio 
[    0.882734] scsi host1: ahci
[    0.883039] scsi host2: ahci
[    0.883347] scsi host3: ahci
[    0.883529] scsi host4: ahci
[    0.883742] scsi host5: ahci
[    0.883941] scsi host6: ahci
[    0.884218] scsi host7: ahci
[    0.884434] scsi host8: ahci
[    0.884545] ata2: SATA max UDMA/133 abar m2048@0xfea40000 port 0xfea40100 irq 34
[    0.884551] ata3: SATA max UDMA/133 abar m2048@0xfea40000 port 0xfea40180 irq 34
[    0.884557] ata4: SATA max UDMA/133 abar m2048@0xfea40000 port 0xfea40200 irq 34
[    0.884563] ata5: SATA max UDMA/133 abar m2048@0xfea40000 port 0xfea40280 irq 34
[    0.884569] ata6: SATA max UDMA/133 abar m2048@0xfea40000 port 0xfea40300 irq 34
[    0.884574] ata7: SATA max UDMA/133 abar m2048@0xfea40000 port 0xfea40380 irq 34
[    0.884580] ata8: SATA max UDMA/133 abar m2048@0xfea40000 port 0xfea40400 irq 34
[    0.884586] ata9: SATA max UDMA/133 abar m2048@0xfea40000 port 0xfea40480 irq 34
[    1.182843] ata1: SATA link down (SStatus 0 SControl 300)
[    1.185226] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.190827] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.198769] ata9: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.198802] ata8: SATA link down (SStatus 0 SControl 310)
[    1.198858] ata5: SATA link down (SStatus 0 SControl 310)
[    1.198894] ata6: SATA link down (SStatus 0 SControl 310)
[    1.198923] ata7: SATA link down (SStatus 0 SControl 310)
[    1.201220] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    1.330587] usb 3-1: New USB device found, idVendor=0438, idProduct=7900
[    1.330593] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.331003] hub 3-1:1.0: USB hub found
[    1.331074] hub 3-1:1.0: 4 ports detected
[    1.342211] usb 1-4: New USB device found, idVendor=046d, idProduct=c52b
[    1.342217] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.342219] usb 1-4: Product: USB Receiver
[    1.342222] usb 1-4: Manufacturer: Logitech
[    1.353146] hidraw: raw HID events driver (C) Jiri Kosina
[    1.354151] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.378413] usbcore: registered new interface driver usbhid
[    1.378417] usbhid: USB HID core driver
[    1.381010] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:10.0-4/input2
[    1.433737] usb 2-1: new SuperSpeed USB device number 2 using xhci_hcd
[    1.449769] usb 2-1: New USB device found, idVendor=1058, idProduct=25e1
[    1.449775] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    1.449778] usb 2-1: Product: My Passport 25E1
[    1.449780] usb 2-1: Manufacturer: Western Digital
[    1.449783] usb 2-1: SerialNumber: 5758483141393636584E4C4B
[    1.454132] usb-storage 2-1:1.0: USB Mass Storage device detected
[    1.454427] scsi host9: usb-storage 2-1:1.0
[    1.454582] usbcore: registered new interface driver usb-storage
[    1.455772] usbcore: registered new interface driver uas
[    1.503251] tsc: Refined TSC clocksource calibration: 2096.066 MHz
[    1.503264] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1e36ac511b1, max_idle_ns: 440795308042 ns
[    1.504692] input: Logitech K400 Plus as /devices/pci0000:00/0000:00:10.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input3
[    1.504814] logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:10.0-4:1
[    1.546786] ata9.00: ATAPI: MARVELL VIRTUAL, 1.09, max UDMA/66
[    1.546978] ata9.00: configured for UDMA/66
[    1.547574] ata3.00: ATA-8: Hitachi HTS725050A9A364, PC4OCH0A, max UDMA/100
[    1.547578] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.548819] ata3.00: configured for UDMA/100
[    1.562271] ata4: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    1.563176] ata4.00: ATA-9: WDC WD20EFRX-68EUZN0, 82.00A82, max UDMA/133
[    1.563182] ata4.00: 3907029168 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.564165] ata4.00: configured for UDMA/133
[    1.565736] usb 2-2: new SuperSpeed USB device number 3 using xhci_hcd
[    1.582164] usb 2-2: New USB device found, idVendor=1058, idProduct=1048
[    1.582170] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=5
[    1.582173] usb 2-2: Product: Elements 1048
[    1.582176] usb 2-2: Manufacturer: Western Digital
[    1.582178] usb 2-2: SerialNumber: 575831314138334131323434
[    1.584635] usb-storage 2-2:1.0: USB Mass Storage device detected
[    1.584944] scsi host10: usb-storage 2-2:1.0
[    1.595142] ata2.00: ATA-8: WDC WD1200BEVS-22UST0, 01.01A01, max UDMA/133
[    1.595148] ata2.00: 234441648 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[    1.596407] ata2.00: configured for UDMA/133
[    1.596869] scsi 1:0:0:0: Direct-Access     ATA      WDC WD1200BEVS-2 1A01 PQ: 0 ANSI: 5
[    1.597724] scsi 2:0:0:0: Direct-Access     ATA      Hitachi HTS72505 CH0A PQ: 0 ANSI: 5
[    1.598319] scsi 3:0:0:0: Direct-Access     ATA      WDC WD20EFRX-68E 0A82 PQ: 0 ANSI: 5
[    1.598969] scsi 8:0:0:0: Processor         Marvell  Console          1.01 PQ: 0 ANSI: 5
[    1.609419] sd 2:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/466 GiB)
[    1.609480] sd 2:0:0:0: [sdb] Write Protect is off
[    1.609483] sd 1:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
[    1.609484] sd 3:0:0:0: [sdc] 3907029168 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    1.609488] sd 3:0:0:0: [sdc] 4096-byte physical blocks
[    1.609491] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[    1.609502] sd 1:0:0:0: [sda] Write Protect is off
[    1.609506] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.609510] sd 3:0:0:0: [sdc] Write Protect is off
[    1.609513] sd 3:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[    1.609543] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.609555] sd 3:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.609575] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    1.654059]  sdc: sdc1
[    1.654985] sd 3:0:0:0: [sdc] Attached SCSI disk
[    1.655416]  sda: sda1 sda2 sda3
[    1.656181] sd 1:0:0:0: [sda] Attached SCSI disk
[    1.966883]  sdb: sdb1
[    1.967809] sd 2:0:0:0: [sdb] Attached SCSI disk
[    2.221010] random: crng init done
[    2.464288] scsi 9:0:0:0: Direct-Access     WD       My Passport 25E1 1015 PQ: 0 ANSI: 6
[    2.464602] scsi 9:0:0:1: Enclosure         WD       SES Device       1015 PQ: 0 ANSI: 6
[    2.467026] sd 9:0:0:0: [sdd] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[    2.467629] sd 9:0:0:0: [sdd] Write Protect is off
[    2.467635] sd 9:0:0:0: [sdd] Mode Sense: 47 00 10 08
[    2.468236] sd 9:0:0:0: [sdd] No Caching mode page found
[    2.468299] sd 9:0:0:0: [sdd] Assuming drive cache: write through
[    2.471910] scsi 9:0:0:1: Wrong diagnostic page; asked for 1 got 8
[    2.471971] scsi 9:0:0:1: Failed to get diagnostic page 0x1
[    2.472014] scsi 9:0:0:1: Failed to bind enclosure -19
[    2.472123] ses 9:0:0:1: Attached Enclosure device
[    2.473971]  sdd: sdd1
[    2.475802] sd 9:0:0:0: [sdd] Attached SCSI disk
[    2.511312] clocksource: Switched to clocksource tsc
[    2.592318] scsi 10:0:0:0: Direct-Access     WD       Elements 1048    1022 PQ: 0 ANSI: 6
[    2.592988] sd 10:0:0:0: [sde] 3907024896 512-byte logical blocks: (2.00 TB/1.82 TiB)
[    2.593591] sd 10:0:0:0: [sde] Write Protect is off
[    2.593595] sd 10:0:0:0: [sde] Mode Sense: 47 00 10 08
[    2.594194] sd 10:0:0:0: [sde] No Caching mode page found
[    2.594246] sd 10:0:0:0: [sde] Assuming drive cache: write through
[    2.599204]  sde: sde1
[    2.601192] sd 10:0:0:0: [sde] Attached SCSI disk
[    3.936895] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    5.497377] ip_tables: (C) 2000-2006 Netfilter Core Team
[    5.583655] systemd[1]: systemd 236 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    5.595649] systemd[1]: Detected architecture x86-64.
[    5.634254] systemd[1]: Set hostname to <arch_shcmos>.
[    7.434733] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    7.435062] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    7.436007] systemd[1]: Created slice System Slice.
[    7.493562] systemd[1]: Listening on Journal Socket.
[    7.495296] systemd[1]: Mounting Kernel Debug File System...
[    7.495831] systemd[1]: Created slice system-getty.slice.
[    7.496153] systemd[1]: Listening on LVM2 poll daemon socket.
[    8.059525] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    8.185486] systemd-journald[237]: Received request to flush runtime journal from PID 1
[    8.779697] systemd-journald[237]: File /var/log/journal/01c984b4dafb43cb85c8229d0bd0212d/system.journal corrupted or uncleanly shut down, renaming and replacing.
[   11.210978] acpi_cpufreq: overriding BIOS provided _PSD data
[   11.863894] AMD0020:00: ttyS0 at MMIO 0xfedc6000 (irq = 10, base_baud = 3000000) is a 16550A
[   12.030699] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
[   12.030704] piix4_smbus 0000:00:14.0: Using register 0x02 for SMBus port selection
[   12.065861] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   12.066001] sp5100_tco: PCI Vendor ID: 0x1022, Device ID: 0x790b, Revision ID: 0x4a
[   12.066007] sp5100_tco: I/O address 0x0cd6 already in use
[   12.165772] rtc_cmos 00:03: RTC can wake from S4
[   12.166018] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[   12.166073] rtc_cmos 00:03: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[   12.370397] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.742443] Linux agpgart interface v0.103
[   12.990283] AVX2 version of gcm_enc/dec engaged.
[   12.990286] AES CTR mode by8 optimization enabled
[   13.700670] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[   13.700889] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   13.999898] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input4
[   14.000024] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input5
[   14.136647] mousedev: PS/2 mouse device common for all mice
[   14.213501] [drm] amdgpu kernel modesetting enabled.
[   14.230116] pps_core: LinuxPPS API ver. 1 registered
[   14.230118] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[   14.232027] PTP clock support registered
[   14.423993] kvm: Nested Virtualization enabled
[   14.423997] kvm: Nested Paging enabled
[   14.423998] SVM: Virtual VMLOAD VMSAVE supported
[   14.423998] SVM: Virtual GIF supported
[   14.441274] tg3.c:v3.137 (May 11, 2014)
[   14.452495] tg3 0000:02:00.0 eth0: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 98:f2:b3:e6:4d:58
[   14.452501] tg3 0000:02:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   14.452505] tg3 0000:02:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[   14.452509] tg3 0000:02:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
[   14.473412] tg3 0000:02:00.1 eth1: Tigon3 [partno(N/A) rev 5720000] (PCI Express) MAC address 98:f2:b3:e6:4d:59
[   14.473419] tg3 0000:02:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[   14.473422] tg3 0000:02:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[   14.473425] tg3 0000:02:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
[   14.615994] AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[   14.739424] MCE: In-kernel MCE decoding enabled.
[   14.740847] tg3 0000:02:00.1 enp2s0f1: renamed from eth1
[   14.747510] Found CRAT image with size=1360
[   14.747514] Parsing CRAT table with 1 nodes
[   14.747516] Found CU entry in CRAT table with proximity_domain=0 caps=0
[   14.747518] CU CPU: cores=4 id_base=16
[   14.747519] Found CU entry in CRAT table with proximity_domain=0 caps=0
[   14.747520] CU GPU: simds=40 id_base=-2147483648
[   14.747521] Found memory entry in CRAT table with proximity_domain=0
[   14.747522] Found memory entry in CRAT table with proximity_domain=0
[   14.747523] Found cache entry in CRAT table with processor_id=16
[   14.747524] Found cache entry in CRAT table with processor_id=16
[   14.747526] Found cache entry in CRAT table with processor_id=16
[   14.747527] Found cache entry in CRAT table with processor_id=17
[   14.747528] Found cache entry in CRAT table with processor_id=18
[   14.747529] Found cache entry in CRAT table with processor_id=18
[   14.747530] Found cache entry in CRAT table with processor_id=18
[   14.747530] Found cache entry in CRAT table with processor_id=19
[   14.747531] Found TLB entry in CRAT table (not processing)
[   14.747532] Found TLB entry in CRAT table (not processing)
[   14.747533] Found TLB entry in CRAT table (not processing)
[   14.747533] Found TLB entry in CRAT table (not processing)
[   14.747534] Found TLB entry in CRAT table (not processing)
[   14.747534] Found TLB entry in CRAT table (not processing)
[   14.747535] Found TLB entry in CRAT table (not processing)
[   14.747536] Found TLB entry in CRAT table (not processing)
[   14.747536] Found TLB entry in CRAT table (not processing)
[   14.747537] Found TLB entry in CRAT table (not processing)
[   14.747538] Creating topology SYSFS entries
[   14.747563] Finished initializing topology ret=0
[   14.747590] kfd kfd: Initialized module
[   14.748076] checking generic (e0000000 7e9000) vs hw (e0000000 10000000)
[   14.748079] fb: switching to amdgpudrmfb from EFI VGA
[   14.748155] Console: switching to colour dummy device 80x25
[   14.749071] [drm] initializing kernel modesetting (CARRIZO 0x1002:0x9874 0x1002:0x1841 0x84).
[   14.749122] [drm] register mmio base: 0xFEB00000
[   14.749124] [drm] register mmio size: 262144
[   14.749627] [drm] UVD is enabled in physical mode
[   14.749630] [drm] VCE enabled in physical mode
[   14.749681] ATOM BIOS: 113-C75100-030
[   14.749708] [drm] GPU post is not needed
[   14.749750] [drm] vm size is 64 GB, block size is 13-bit, fragment size is 9-bit
[   14.749762] amdgpu 0000:00:01.0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
[   14.749766] amdgpu 0000:00:01.0: GTT: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
[   14.749782] [drm] Detected VRAM RAM=512M, BAR=512M
[   14.749784] [drm] RAM width 64bits UNKNOWN
[   14.749803] tg3 0000:02:00.0 enp2s0f0: renamed from eth0
[   14.750282] [TTM] Zone  kernel: Available graphics memory: 7937162 kiB
[   14.750285] [TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[   14.750287] [TTM] Initializing pool allocator
[   14.750297] [TTM] Initializing DMA pool allocator
[   14.750358] [drm] amdgpu: 512M of VRAM memory ready
[   14.750361] [drm] amdgpu: 3072M of GTT memory ready.
[   14.750403] [drm] GART: num cpu pages 262144, num gpu pages 262144
[   14.750515] [drm] PCIE GART of 1024M enabled (table at 0x000000F400040000).
[   14.750709] amdgpu 0000:00:01.0: amdgpu: using MSI.
[   14.750739] [drm] amdgpu: irq initialized.
[   14.750773] amdgpu: [powerplay] amdgpu: powerplay sw initialized
[   14.869206] EDAC amd64: Node 0: DRAM ECC enabled.
[   14.869210] EDAC amd64: F15h_M60h detected (node 0).
[   14.869269] EDAC MC: DCT0 chip selects:
[   14.869272] EDAC amd64: MC: 0:  8192MB 1:  8192MB
[   14.869274] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.869275] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.869277] EDAC amd64: MC: 6:     0MB 7:     0MB
[   14.869278] EDAC MC: DCT1 chip selects:
[   14.869280] EDAC amd64: MC: 0:     0MB 1:     0MB
[   14.869281] EDAC amd64: MC: 2:     0MB 3:     0MB
[   14.869283] EDAC amd64: MC: 4:     0MB 5:     0MB
[   14.869285] EDAC amd64: MC: 6:     0MB 7:     0MB
[   14.869286] EDAC amd64: using x8 syndromes.
[   14.869287] EDAC amd64: MCT channel count: 1
[   14.869541] EDAC MC0: Giving out device to module amd64_edac controller F15h_M60h: DEV 0000:00:18.3 (INTERRUPT)
[   14.869561] EDAC PCI0: Giving out device to module amd64_edac controller EDAC PCI controller: DEV 0000:00:18.2 (POLLED)
[   14.869562] AMD64 EDAC driver v3.5.0
[   15.014887] amdgpu 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000000400080, cpu addr 0x000000001d0692ca
[   15.014987] amdgpu 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000000400100, cpu addr 0x0000000049c34664
[   15.015037] amdgpu 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000000400180, cpu addr 0x00000000bfb0daed
[   15.015075] amdgpu 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000000400200, cpu addr 0x00000000b7b1283a
[   15.015138] amdgpu 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000000400280, cpu addr 0x00000000da25d702
[   15.015259] amdgpu 0000:00:01.0: fence driver on ring 5 use gpu addr 0x0000000000400300, cpu addr 0x00000000b5a15284
[   15.015300] amdgpu 0000:00:01.0: fence driver on ring 6 use gpu addr 0x0000000000400380, cpu addr 0x00000000ffaa0ac5
[   15.015347] amdgpu 0000:00:01.0: fence driver on ring 7 use gpu addr 0x0000000000400400, cpu addr 0x00000000731d5c91
[   15.015382] amdgpu 0000:00:01.0: fence driver on ring 8 use gpu addr 0x0000000000400480, cpu addr 0x000000005a7a8968
[   15.015414] amdgpu 0000:00:01.0: fence driver on ring 9 use gpu addr 0x0000000000400520, cpu addr 0x0000000071483651
[   15.016918] amdgpu 0000:00:01.0: fence driver on ring 10 use gpu addr 0x00000000004005a0, cpu addr 0x0000000026c872d8
[   15.016984] amdgpu 0000:00:01.0: fence driver on ring 11 use gpu addr 0x0000000000400620, cpu addr 0x000000006b8b584a
[   15.029091] [drm] Found UVD firmware Version: 1.87 Family ID: 11
[   15.029754] amdgpu 0000:00:01.0: fence driver on ring 12 use gpu addr 0x000000f4002956e0, cpu addr 0x00000000d4f64807
[   15.048890] [drm] Found VCE firmware Version: 52.4 Binary ID: 3
[   15.049310] amdgpu 0000:00:01.0: fence driver on ring 13 use gpu addr 0x0000000000400720, cpu addr 0x00000000987d02e1
[   15.049384] amdgpu 0000:00:01.0: fence driver on ring 14 use gpu addr 0x00000000004007a0, cpu addr 0x000000004b23d6de
[   15.053742] [drm] DM_PPLIB: values for Engine clock
[   15.053746] [drm] DM_PPLIB:	 30000
[   15.053747] [drm] DM_PPLIB:	 36000
[   15.053748] [drm] DM_PPLIB:	 42353
[   15.053749] [drm] DM_PPLIB:	 51429
[   15.053750] [drm] DM_PPLIB:	 62609
[   15.053751] [drm] DM_PPLIB:	 72000
[   15.053752] [drm] DM_PPLIB:	 75790
[   15.053753] [drm] DM_PPLIB:	 80000
[   15.053754] [drm] DM_PPLIB: Validation clocks:
[   15.053755] [drm] DM_PPLIB:    engine_max_clock: 80000
[   15.053756] [drm] DM_PPLIB:    memory_max_clock: 120000
[   15.053757] [drm] DM_PPLIB:    level           : 0
[   15.053761] [drm] DM_PPLIB: values for Display clock
[   15.053761] [drm] DM_PPLIB:	 30000
[   15.053762] [drm] DM_PPLIB:	 40000
[   15.053763] [drm] DM_PPLIB:	 49656
[   15.053764] [drm] DM_PPLIB:	 62609
[   15.053765] [drm] DM_PPLIB:	 68572
[   15.053766] [drm] DM_PPLIB:	 75790
[   15.053767] [drm] DM_PPLIB:	 80000
[   15.053768] [drm] DM_PPLIB:	 84706
[   15.053769] [drm] DM_PPLIB: Validation clocks:
[   15.053769] [drm] DM_PPLIB:    engine_max_clock: 80000
[   15.053770] [drm] DM_PPLIB:    memory_max_clock: 120000
[   15.053771] [drm] DM_PPLIB:    level           : 0
[   15.053773] [drm] DM_PPLIB: values for Memory clock
[   15.053774] [drm] DM_PPLIB:	 66700
[   15.053775] [drm] DM_PPLIB:	 120000
[   15.053776] [drm] DM_PPLIB: Validation clocks:
[   15.053777] [drm] DM_PPLIB:    engine_max_clock: 80000
[   15.053778] [drm] DM_PPLIB:    memory_max_clock: 120000
[   15.053779] [drm] DM_PPLIB:    level           : 0
[   15.053783] [drm] DC: create_links: connectors_num: physical:3, virtual:0
[   15.110085] Adding 17605628k swap on /dev/sda3.  Priority:-2 extents:1 across:17605628k FS
[   15.365402] [drm:hwss_wait_for_blank_complete [amdgpu]] *ERROR* DC: failed to blank crtc!
[   15.365447] [drm] Display Core initialized!
[   15.373613] [drm] Type 1 DP-HDMI passive dongle 165Mhz: 
[   15.399813] [drm] SHARP HDMI: [Block 0] 
[   15.399818] [drm] SHARP HDMI: [Block 1] 
[   15.399824] [drm] dc_link_detect: manufacturer_id = 104D, product_id = 105D, serial_number = 0, manufacture_week = 255, manufacture_year = 20, display_name = SHARP HDMI, speaker_flag = 1, audio_mode_count = 1
[   15.399827] [drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[   15.400544] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[   15.400545] [drm] Driver supports precise vblank timestamp query.
[   15.401952] [drm] ring test on 0 succeeded in 10 usecs
[   15.402411] [drm] ring test on 9 succeeded in 8 usecs
[   15.402429] [drm] ring test on 1 succeeded in 6 usecs
[   15.402438] [drm] ring test on 2 succeeded in 2 usecs
[   15.402447] [drm] ring test on 3 succeeded in 2 usecs
[   15.402455] [drm] ring test on 4 succeeded in 2 usecs
[   15.402471] [drm] ring test on 5 succeeded in 5 usecs
[   15.402479] [drm] ring test on 6 succeeded in 2 usecs
[   15.402488] [drm] ring test on 7 succeeded in 2 usecs
[   15.402498] [drm] ring test on 8 succeeded in 2 usecs
[   15.402552] [drm] ring test on 10 succeeded in 3 usecs
[   15.402559] [drm] ring test on 11 succeeded in 3 usecs
[   15.902263] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: data=ordered
[   15.926265] EXT4-fs (sdd1): mounted filesystem with ordered data mode. Opts: data=ordered
[   15.966511] EXT4-fs (sdc1): mounted filesystem with ordered data mode. Opts: data=ordered
[   16.163612] EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: data=ordered
[   16.429028] [drm] ring test on 12 succeeded in 0 usecs
[   16.429031] [drm] UVD initialized successfully.
[   16.630105] [drm] ring test on 13 succeeded in 6 usecs
[   16.630113] [drm] ring test on 14 succeeded in 1 usecs
[   16.630113] [drm] VCE initialized successfully.
[   16.630696] [drm] ib test on ring 0 succeeded
[   16.630824] [drm] ib test on ring 1 succeeded
[   16.630845] [drm] ib test on ring 2 succeeded
[   16.630864] [drm] ib test on ring 3 succeeded
[   16.630884] [drm] ib test on ring 4 succeeded
[   16.630904] [drm] ib test on ring 5 succeeded
[   16.630923] [drm] ib test on ring 6 succeeded
[   16.630943] [drm] ib test on ring 7 succeeded
[   16.630961] [drm] ib test on ring 8 succeeded
[   16.630983] [drm] ib test on ring 9 succeeded
[   16.631004] [drm] ib test on ring 10 succeeded
[   16.631020] [drm] ib test on ring 11 succeeded
[   16.631396] [drm] ib test on ring 12 succeeded
[   16.631485] [drm] ib test on ring 13 succeeded
[   16.632911] [drm] fb mappable at 0x4015BC000
[   16.632913] [drm] vram apper at 0x3FF000000
[   16.632914] [drm] size 8294400
[   16.632915] [drm] fb depth is 24
[   16.632915] [drm]    pitch is 7680
[   16.633032] fbcon: amdgpudrmfb (fb0) is primary device
[   16.643639] [drm] {1920x1080, 2640x1125@148500Khz}
[   16.668633] Console: switching to colour frame buffer device 240x67
[   16.672194] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[   16.691948] kfd kfd: Allocated 3969056 bytes on gart
[   16.691967] Adding doorbell packet type capability
[   16.692077] kfd kfd: added device 1002:9874
[   16.692114] [drm] Initialized amdgpu 3.23.0 20150101 for 0000:00:01.0 on minor 0
[   16.703174] Netfilter messages via NETLINK v0.30.
[   16.890771] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   16.894374] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   16.894436] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   16.894438] cfg80211: failed to load regulatory.db
[   17.018803] nf_tables: (c) 2007-2009 Patrick McHardy <kaber@trash.net>
[   17.570740] IPv6: ADDRCONF(NETDEV_UP): enp2s0f0: link is not ready
[   17.695685] IPv6: ADDRCONF(NETDEV_UP): enp2s0f1: link is not ready
[   17.920757] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
[   21.026366] tg3 0000:02:00.0 enp2s0f0: Link is up at 1000 Mbps, full duplex
[   21.026397] tg3 0000:02:00.0 enp2s0f0: Flow control is on for TX and on for RX
[   21.026399] tg3 0000:02:00.0 enp2s0f0: EEE is enabled
[   21.026456] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0f0: link becomes ready
[  265.619318] systemd-journald[237]: File /var/log/journal/01c984b4dafb43cb85c8229d0bd0212d/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[ 2947.332405] logitech-hidpp-device 0003:046D:404D.0004: HID++ 4.1 device connected.
[ 4220.137557] [drm] {1920x1080, 2640x1125@148500Khz}
[ 5048.309691] [drm] Type 1 DP-HDMI passive dongle 165Mhz: 
[ 5048.334617] [drm] SHARP HDMI: [Block 0] 
[ 5048.334621] [drm] SHARP HDMI: [Block 1] 
[ 5048.334627] [drm] dc_link_detect: manufacturer_id = 104D, product_id = 105D, serial_number = 0, manufacture_week = 255, manufacture_year = 20, display_name = SHARP HDMI, speaker_flag = 1, audio_mode_count = 1
[ 5048.334629] [drm] dc_link_detect: mode number = 0, format_code = 1, channel_count = 1, sample_rate = 7, sample_size = 7
[ 5048.335406] [drm] {1920x1080, 2640x1125@148500Khz}

Xorg.log

[  2950.835] 
X.Org X Server 1.19.6
Release Date: 2017-12-20
[  2950.835] X Protocol Version 11, Revision 0
[  2950.835] Build Operating System: Linux 4.14.12-1-ARCH x86_64 
[  2950.835] Current Operating System: Linux arch_shcmos 4.15.1-2-ARCH #1 SMP Sun Feb 4 22:27:45 UTC 2018 x86_64
[  2950.835] Kernel command line: root=/dev/sda2 rw initrd=/initramfs-linux.img amd_iommu=on iommu=pt amdgpu.dc=1
[  2950.835] Build Date: 26 January 2018  10:25:18AM
[  2950.835]  
[  2950.835] Current version of pixman: 0.34.0
[  2950.835] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  2950.835] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  2950.836] (==) Log file: "/home/cmos/.local/share/xorg/Xorg.0.log", Time: Wed Feb  7 06:35:31 2018
[  2950.889] (==) Using config directory: "/etc/X11/xorg.conf.d"
[  2950.889] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  2950.933] (==) No Layout section.  Using the first Screen section.
[  2950.933] (==) No screen section available. Using defaults.
[  2950.933] (**) |-->Screen "Default Screen Section" (0)
[  2950.933] (**) |   |-->Monitor "<default monitor>"
[  2950.934] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[  2950.934] (**) |   |-->Device "AMD"
[  2950.934] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  2950.934] (==) Automatically adding devices
[  2950.934] (==) Automatically enabling devices
[  2950.934] (==) Automatically adding GPU devices
[  2950.934] (==) Automatically binding GPU devices
[  2950.934] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  2950.934] (WW) The directory "/usr/share/fonts/misc/" does not exist.
[  2950.934] 	Entry deleted from font path.
[  2950.934] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[  2950.934] 	Entry deleted from font path.
[  2950.934] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[  2950.934] 	Entry deleted from font path.
[  2950.934] (WW) The directory "/usr/share/fonts/100dpi/" does not exist.
[  2950.934] 	Entry deleted from font path.
[  2950.934] (WW) The directory "/usr/share/fonts/75dpi/" does not exist.
[  2950.934] 	Entry deleted from font path.
[  2950.934] (==) FontPath set to:
	/usr/share/fonts/TTF/
[  2950.934] (==) ModulePath set to "/usr/lib/xorg/modules"
[  2950.934] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  2950.935] (II) Loader magic: 0x557b34193d60
[  2950.935] (II) Module ABI versions:
[  2950.935] 	X.Org ANSI C Emulation: 0.4
[  2950.935] 	X.Org Video Driver: 23.0
[  2950.935] 	X.Org XInput driver : 24.1
[  2950.935] 	X.Org Server Extension : 10.0
[  2950.936] (++) using VT number 1

[  2950.936] (--) controlling tty is VT number 1, auto-enabling KeepTty
[  2950.939] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c4
[  2950.940] (II) xfree86: Adding drm device (/dev/dri/card0)
[  2950.942] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 11 paused 0
[  2950.947] (--) PCI:*(0:0:1:0) 1002:9874:1002:1841 rev 132, Mem @ 0xe0000000/268435456, 0xf0000000/8388608, 0xfeb00000/262144, I/O @ 0x0000f000/256, BIOS @ 0x????????/131072
[  2950.947] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  2950.947] (II) LoadModule: "glx"
[  2951.006] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[  2951.024] (II) Module glx: vendor="X.Org Foundation"
[  2951.024] 	compiled for 1.19.6, module version = 1.0.0
[  2951.024] 	ABI class: X.Org Server Extension, version 10.0
[  2951.024] (II) LoadModule: "amdgpu"
[  2951.045] (II) Loading /usr/lib/xorg/modules/drivers/amdgpu_drv.so
[  2951.091] (II) Module amdgpu: vendor="X.Org Foundation"
[  2951.091] 	compiled for 1.19.3, module version = 1.4.0
[  2951.091] 	Module class: X.Org Video Driver
[  2951.091] 	ABI class: X.Org Video Driver, version 23.0
[  2951.091] (II) AMDGPU: Driver for AMD Radeon:
	All GPUs supported by the amdgpu kernel driver
[  2951.091] (II) [KMS] Kernel modesetting enabled.
[  2951.115] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[  2951.115] (II) AMDGPU(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  2951.115] (==) AMDGPU(0): Depth 24, (--) framebuffer bpp 32
[  2951.115] (II) AMDGPU(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[  2951.115] (==) AMDGPU(0): Default visual is TrueColor
[  2951.115] (==) AMDGPU(0): RGB weight 888
[  2951.115] (II) AMDGPU(0): Using 8 bits per RGB (8 bit DAC)
[  2951.115] (--) AMDGPU(0): Chipset: "AMD Radeon R7 Graphics" (ChipID = 0x9874)
[  2951.115] (II) Loading sub module "fb"
[  2951.115] (II) LoadModule: "fb"
[  2951.115] (II) Loading /usr/lib/xorg/modules/libfb.so
[  2951.138] (II) Module fb: vendor="X.Org Foundation"
[  2951.138] 	compiled for 1.19.6, module version = 1.0.0
[  2951.138] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2951.138] (II) Loading sub module "dri2"
[  2951.138] (II) LoadModule: "dri2"
[  2951.138] (II) Module "dri2" already built-in
[  2952.934] (II) Loading sub module "glamoregl"
[  2952.934] (II) LoadModule: "glamoregl"
[  2952.934] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[  2953.004] (II) Module glamoregl: vendor="X.Org Foundation"
[  2953.004] 	compiled for 1.19.6, module version = 1.0.0
[  2953.004] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  2953.004] (II) glamor: OpenGL accelerated X.org driver based.
[  2953.143] (II) glamor: EGL version 1.5 (DRI2):
[  2953.214] (II) AMDGPU(0): glamor detected, initialising EGL layer.
[  2953.214] (==) AMDGPU(0): TearFree property default: auto
[  2953.214] (II) AMDGPU(0): KMS Pageflipping: enabled
[  2953.214] (II) AMDGPU(0): Output DisplayPort-0 has no monitor section
[  2953.215] (II) AMDGPU(0): Output DisplayPort-1 has no monitor section
[  2953.215] (II) AMDGPU(0): Output DisplayPort-2 has no monitor section
[  2953.239] (II) AMDGPU(0): EDID for output DisplayPort-0
[  2953.240] (II) AMDGPU(0): Manufacturer: SHP  Model: 105d  Serial#: 0
[  2953.240] (II) AMDGPU(0): Year: 2010  Week: 255
[  2953.240] (II) AMDGPU(0): EDID Version: 1.3
[  2953.240] (II) AMDGPU(0): Digital Display Input
[  2953.240] (II) AMDGPU(0): Max Image Size [cm]: horiz.: 133  vert.: 75
[  2953.240] (II) AMDGPU(0): Gamma: 2.20
[  2953.240] (II) AMDGPU(0): DPMS capabilities: Off
[  2953.240] (II) AMDGPU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
[  2953.240] (II) AMDGPU(0): First detailed timing is preferred mode
[  2953.240] (II) AMDGPU(0): redX: 0.633 redY: 0.333   greenX: 0.205 greenY: 0.702
[  2953.240] (II) AMDGPU(0): blueX: 0.150 blueY: 0.081   whiteX: 0.292 whiteY: 0.322
[  2953.240] (II) AMDGPU(0): Supported established timings:
[  2953.240] (II) AMDGPU(0): 720x400@70Hz
[  2953.240] (II) AMDGPU(0): 640x480@60Hz
[  2953.240] (II) AMDGPU(0): 640x480@72Hz
[  2953.240] (II) AMDGPU(0): 640x480@75Hz
[  2953.240] (II) AMDGPU(0): 800x600@56Hz
[  2953.240] (II) AMDGPU(0): 800x600@60Hz
[  2953.240] (II) AMDGPU(0): 800x600@72Hz
[  2953.240] (II) AMDGPU(0): 800x600@75Hz
[  2953.240] (II) AMDGPU(0): 1024x768@60Hz
[  2953.240] (II) AMDGPU(0): 1024x768@70Hz
[  2953.240] (II) AMDGPU(0): 1024x768@75Hz
[  2953.240] (II) AMDGPU(0): Manufacturer's mask: 0
[  2953.240] (II) AMDGPU(0): Supported standard timings:
[  2953.240] (II) AMDGPU(0): #0: hsize: 1600  vsize 1200  refresh: 60  vid: 16553
[  2953.240] (II) AMDGPU(0): #1: hsize: 1400  vsize 1050  refresh: 60  vid: 16528
[  2953.240] (II) AMDGPU(0): #2: hsize: 1280  vsize 1024  refresh: 60  vid: 32897
[  2953.240] (II) AMDGPU(0): Supported detailed timing:
[  2953.240] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  1329 x 748 mm
[  2953.240] (II) AMDGPU(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[  2953.240] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  2953.240] (II) AMDGPU(0): Supported detailed timing:
[  2953.240] (II) AMDGPU(0): clock: 85.5 MHz   Image Size:  0 x 0 mm
[  2953.240] (II) AMDGPU(0): h_active: 1360  h_sync: 1424  h_sync_end 1536 h_blank_end 1792 h_border: 0
[  2953.240] (II) AMDGPU(0): v_active: 768  v_sync: 771  v_sync_end 777 v_blanking: 795 v_border: 0
[  2953.240] (II) AMDGPU(0): Monitor name: SHARP HDMI
[  2953.240] (II) AMDGPU(0): Ranges: V min: 23 V max: 76 Hz, H min: 15 H max: 75 kHz, PixClock max 175 MHz
[  2953.240] (II) AMDGPU(0): Supported detailed timing:
[  2953.240] (II) AMDGPU(0): clock: 148.5 MHz   Image Size:  1329 x 748 mm
[  2953.240] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  2953.240] (II) AMDGPU(0): v_active: 1080  v_sync: 1084  v_sync_end 1089 v_blanking: 1125 v_border: 0
[  2953.240] (II) AMDGPU(0): Supported detailed timing:
[  2953.240] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  1329 x 748 mm
[  2953.240] (II) AMDGPU(0): h_active: 1920  h_sync: 2448  h_sync_end 2492 h_blank_end 2640 h_border: 0
[  2953.240] (II) AMDGPU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[  2953.240] (II) AMDGPU(0): Supported detailed timing:
[  2953.240] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  1329 x 748 mm
[  2953.240] (II) AMDGPU(0): h_active: 1920  h_sync: 2008  h_sync_end 2052 h_blank_end 2200 h_border: 0
[  2953.240] (II) AMDGPU(0): v_active: 540  v_sync: 542  v_sync_end 547 v_blanking: 562 v_border: 0
[  2953.240] (II) AMDGPU(0): Supported detailed timing:
[  2953.240] (II) AMDGPU(0): clock: 74.2 MHz   Image Size:  1329 x 748 mm
[  2953.240] (II) AMDGPU(0): h_active: 1280  h_sync: 1720  h_sync_end 1760 h_blank_end 1980 h_border: 0
[  2953.240] (II) AMDGPU(0): v_active: 720  v_sync: 725  v_sync_end 730 v_blanking: 750 v_border: 0
[  2953.240] (II) AMDGPU(0): Number of EDID sections to follow: 1
[  2953.240] (II) AMDGPU(0): EDID (in hex):
[  2953.240] (II) AMDGPU(0): 	00ffffffffffff004d105d1000000000
[  2953.240] (II) AMDGPU(0): 	ff14010380854b782a1bbea25534b326
[  2953.240] (II) AMDGPU(0): 	144a52afce00a9409040818001010101
[  2953.240] (II) AMDGPU(0): 	010101010101023a80d072382d40102c
[  2953.240] (II) AMDGPU(0): 	458031ec5200001e662150b051001b30
[  2953.240] (II) AMDGPU(0): 	4070360000000000001e000000fc0053
[  2953.240] (II) AMDGPU(0): 	484152502048444d490a2020000000fd
[  2953.240] (II) AMDGPU(0): 	00174c0f4b11000a2020202020200171
[  2953.240] (II) AMDGPU(0): 	02033172509f90201405130412031102
[  2953.240] (II) AMDGPU(0): 	16071506012309070783010000e30503
[  2953.240] (II) AMDGPU(0): 	016f030c004000b82d20a00501402050
[  2953.240] (II) AMDGPU(0): 	60023a801871382d40582c450031ec52
[  2953.240] (II) AMDGPU(0): 	00001e011d80d0721c1620102c258031
[  2953.240] (II) AMDGPU(0): 	ec5200009e011d8018711c1620582c25
[  2953.240] (II) AMDGPU(0): 	0031ec5200009e011d00bc52d01e20b8
[  2953.240] (II) AMDGPU(0): 	28554031ec5200001e0000000000003a
[  2953.240] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz
[  2953.240] (II) AMDGPU(0): Printing probed modes for output DisplayPort-0
[  2953.240] (II) AMDGPU(0): Modeline "1920x1080"x50.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz eP)
[  2953.241] (II) AMDGPU(0): Modeline "1920x1080"x60.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1920x1080"x59.9  148.35  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1920x1080"x24.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1920x1080"x24.0   74.18  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1600x1200"x60.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1680x1050"x50.0  148.50  1680 2448 2492 2640  1050 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1400x1050"x59.9  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1280x1024"x60.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1440x900"x50.0  148.50  1440 2448 2492 2640  900 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1360x768"x60.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1280x800"x50.0  148.50  1280 2448 2492 2640  800 1084 1089 1125 +hsync +vsync (56.2 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1280x720"x60.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1280x720"x50.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1280x720"x59.9   74.18  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1024x768"x75.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1024x768"x70.1   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "800x600"x72.2   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "800x600"x75.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "800x600"x60.3   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "800x600"x56.2   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "720x576"x50.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "720x480"x60.0   27.03  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "720x480"x59.9   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "640x480"x75.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "640x480"x72.8   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "640x480"x60.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "640x480"x59.9   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  2953.241] (II) AMDGPU(0): Modeline "720x400"x70.1   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  2953.241] (II) AMDGPU(0): EDID for output DisplayPort-1
[  2953.241] (II) AMDGPU(0): EDID for output DisplayPort-2
[  2953.241] (II) AMDGPU(0): Output DisplayPort-0 connected
[  2953.241] (II) AMDGPU(0): Output DisplayPort-1 disconnected
[  2953.241] (II) AMDGPU(0): Output DisplayPort-2 disconnected
[  2953.241] (II) AMDGPU(0): Using exact sizes for initial modes
[  2953.241] (II) AMDGPU(0): Output DisplayPort-0 using initial mode 1920x1080 +0+0
[  2953.241] (II) AMDGPU(0): mem size init: gart size :bf95e000 vram size: s:1d25d000 visible:1d25d000
[  2953.241] (==) AMDGPU(0): DPI set to (96, 96)
[  2953.241] (==) AMDGPU(0): Using gamma correction (1.0, 1.0, 1.0)
[  2953.241] (II) Loading sub module "ramdac"
[  2953.241] (II) LoadModule: "ramdac"
[  2953.241] (II) Module "ramdac" already built-in
[  2953.241] (--) Depth 24 pixmap format is 32 bpp
[  2953.243] (II) AMDGPU(0): [DRI2] Setup complete
[  2953.243] (II) AMDGPU(0): [DRI2]   DRI driver: radeonsi
[  2953.243] (II) AMDGPU(0): [DRI2]   VDPAU driver: radeonsi
[  2953.243] (II) AMDGPU(0): Front buffer pitch: 7680 bytes
[  2953.252] (II) AMDGPU(0): SYNC extension fences enabled
[  2953.254] (II) AMDGPU(0): Present extension enabled
[  2953.254] (==) AMDGPU(0): DRI3 enabled
[  2953.254] (==) AMDGPU(0): Backing store enabled
[  2953.254] (II) AMDGPU(0): Direct rendering enabled
[  2953.636] (II) AMDGPU(0): Use GLAMOR acceleration.
[  2953.636] (II) AMDGPU(0): Acceleration enabled
[  2953.636] (==) AMDGPU(0): DPMS enabled
[  2953.636] (==) AMDGPU(0): Silken mouse enabled
[  2953.637] (II) AMDGPU(0): Set up textured video (glamor)
[  2953.637] (II) AMDGPU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[  2953.667] (--) RandR disabled
[  2953.681] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[  2953.681] (II) AIGLX: enabled GLX_ARB_create_context
[  2953.681] (II) AIGLX: enabled GLX_ARB_create_context_profile
[  2953.681] (II) AIGLX: enabled GLX_EXT_create_context_es{,2}_profile
[  2953.681] (II) AIGLX: enabled GLX_INTEL_swap_event
[  2953.681] (II) AIGLX: enabled GLX_SGI_swap_control
[  2953.681] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[  2953.681] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[  2953.681] (II) AIGLX: enabled GLX_EXT_fbconfig_packed_float
[  2953.681] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[  2953.681] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[  2953.684] (II) AIGLX: Loaded and initialized radeonsi
[  2953.684] (II) GLX: Initialized DRI2 GL provider for screen 0
[  2953.719] (II) AMDGPU(0): Setting screen physical size to 508 x 285
[  2954.958] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[  2954.958] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2954.958] (II) LoadModule: "libinput"
[  2954.958] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[  2955.015] (II) Module libinput: vendor="X.Org Foundation"
[  2955.015] 	compiled for 1.19.3, module version = 0.26.0
[  2955.015] 	Module class: X.Org XInput Driver
[  2955.015] 	ABI class: X.Org XInput driver, version 24.1
[  2955.015] (II) Using input driver 'libinput' for 'Power Button'
[  2955.016] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 24 paused 0
[  2955.017] (**) Power Button: always reports core events
[  2955.017] (**) Option "Device" "/dev/input/event1"
[  2955.017] (**) Option "_source" "server/udev"
[  2955.017] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  2955.017] (II) event1  - (II) Power Button: (II) device is a keyboard
[  2955.017] (II) event1  - (II) Power Button: (II) device removed
[  2955.018] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[  2955.018] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[  2955.018] (II) event1  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  2955.018] (II) event1  - (II) Power Button: (II) device is a keyboard
[  2955.019] (II) config/udev: Adding input device Video Bus (/dev/input/event2)
[  2955.019] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[  2955.019] (II) Using input driver 'libinput' for 'Video Bus'
[  2955.021] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 27 paused 0
[  2955.021] (**) Video Bus: always reports core events
[  2955.021] (**) Option "Device" "/dev/input/event2"
[  2955.021] (**) Option "_source" "server/udev"
[  2955.022] (II) event2  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  2955.022] (II) event2  - (II) Video Bus: (II) device is a keyboard
[  2955.022] (II) event2  - (II) Video Bus: (II) device removed
[  2955.022] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input2/event2"
[  2955.022] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[  2955.023] (II) event2  - (II) Video Bus: (II) is tagged by udev as: Keyboard
[  2955.023] (II) event2  - (II) Video Bus: (II) device is a keyboard
[  2955.024] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[  2955.024] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[  2955.024] (II) Using input driver 'libinput' for 'Power Button'
[  2955.025] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 28 paused 0
[  2955.025] (**) Power Button: always reports core events
[  2955.025] (**) Option "Device" "/dev/input/event0"
[  2955.025] (**) Option "_source" "server/udev"
[  2955.026] (II) event0  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  2955.026] (II) event0  - (II) Power Button: (II) device is a keyboard
[  2955.026] (II) event0  - (II) Power Button: (II) device removed
[  2955.026] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[  2955.026] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[  2955.027] (II) event0  - (II) Power Button: (II) is tagged by udev as: Keyboard
[  2955.027] (II) event0  - (II) Power Button: (II) device is a keyboard
[  2955.028] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event4)
[  2955.028] (II) No input driver specified, ignoring this device.
[  2955.028] (II) This device may have been added with another device file.
[  2955.029] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=7 (/dev/input/event5)
[  2955.029] (II) No input driver specified, ignoring this device.
[  2955.029] (II) This device may have been added with another device file.
[  2955.030] (II) config/udev: Adding input device Logitech K400 Plus (/dev/input/event3)
[  2955.030] (**) Logitech K400 Plus: Applying InputClass "libinput pointer catchall"
[  2955.030] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"
[  2955.030] (II) Using input driver 'libinput' for 'Logitech K400 Plus'
[  2955.032] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 29 paused 0
[  2955.032] (**) Logitech K400 Plus: always reports core events
[  2955.032] (**) Option "Device" "/dev/input/event3"
[  2955.032] (**) Option "_source" "server/udev"
[  2955.033] (II) event3  - (II) Logitech K400 Plus: (II) is tagged by udev as: Keyboard Mouse
[  2955.033] (II) event3  - (II) Logitech K400 Plus: (II) device is a pointer
[  2955.033] (II) event3  - (II) Logitech K400 Plus: (II) device is a keyboard
[  2955.033] (II) event3  - (II) Logitech K400 Plus: (II) device removed
[  2955.033] (II) libinput: Logitech K400 Plus: needs a virtual subdevice
[  2955.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input3/event3"
[  2955.033] (II) XINPUT: Adding extended input device "Logitech K400 Plus" (type: MOUSE, id 9)
[  2955.034] (**) Option "AccelerationScheme" "none"
[  2955.034] (**) Logitech K400 Plus: (accel) selected scheme none/0
[  2955.034] (**) Logitech K400 Plus: (accel) acceleration factor: 2.000
[  2955.034] (**) Logitech K400 Plus: (accel) acceleration threshold: 4
[  2955.035] (II) event3  - (II) Logitech K400 Plus: (II) is tagged by udev as: Keyboard Mouse
[  2955.035] (II) event3  - (II) Logitech K400 Plus: (II) device is a pointer
[  2955.035] (II) event3  - (II) Logitech K400 Plus: (II) device is a keyboard
[  2955.036] (II) config/udev: Adding input device Logitech K400 Plus (/dev/input/mouse0)
[  2955.036] (II) No input driver specified, ignoring this device.
[  2955.036] (II) This device may have been added with another device file.
[  2955.043] (**) Logitech K400 Plus: Applying InputClass "libinput pointer catchall"
[  2955.043] (**) Logitech K400 Plus: Applying InputClass "libinput keyboard catchall"
[  2955.043] (II) Using input driver 'libinput' for 'Logitech K400 Plus'
[  2955.043] (II) systemd-logind: returning pre-existing fd for /dev/input/event3 13:67
[  2955.043] (**) Logitech K400 Plus: always reports core events
[  2955.043] (**) Option "Device" "/dev/input/event3"
[  2955.043] (**) Option "_source" "_driver/libinput"
[  2955.043] (II) libinput: Logitech K400 Plus: is a virtual subdevice
[  2955.043] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb1/1-4/1-4:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input3/event3"
[  2955.043] (II) XINPUT: Adding extended input device "Logitech K400 Plus" (type: KEYBOARD, id 10)
[  5048.391] (II) AMDGPU(0): EDID vendor "SHP", prod id 4189
[  5048.391] (II) AMDGPU(0): Using EDID range info for horizontal sync
[  5048.391] (II) AMDGPU(0): Using EDID range info for vertical refresh
[  5048.391] (II) AMDGPU(0): Printing DDC gathered Modelines:
[  5048.391] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2448 2492 2640  1080 1084 1089 1125 +hsync +vsync (56.2 kHz eP)
[  5048.391] (II) AMDGPU(0): Modeline "1360x768"x0.0   85.50  1360 1424 1536 1792  768 771 777 795 +hsync +vsync (47.7 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1920x1080"x0.0  148.50  1920 2008 2052 2200  1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2448 2492 2640  1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1920x1080i"x0.0   74.25  1920 2008 2052 2200  1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1720 1760 1980  720 725 730 750 +hsync +vsync (37.5 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 492 520 -hsync -vsync (37.9 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "640x480"x0.0   25.18  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1024x768"x0.0   78.75  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.0 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1600x1200"x0.0  162.00  1600 1664 1856 2160  1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1400x1050"x0.0  101.00  1400 1448 1480 1560  1050 1053 1057 1080 +hsync -vsync (64.7 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1280x1024"x0.0  108.00  1280 1328 1440 1688  1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1920x1080"x0.0   74.25  1920 2558 2602 2750  1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1280x720"x0.0   74.25  1280 1390 1430 1650  720 725 730 750 +hsync +vsync (45.0 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "720x576"x0.0   27.00  720 732 796 864  576 581 586 625 -hsync -vsync (31.2 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "720x480"x0.0   27.00  720 736 798 858  480 489 495 525 -hsync -vsync (31.5 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1440x576i"x0.0   27.00  1440 1464 1590 1728  576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[  5048.391] (II) AMDGPU(0): Modeline "1440x480i"x0.0   27.00  1440 1478 1602 1716  480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[  5048.391] (--) AMDGPU(0): HDMI max TMDS frequency 225000KHz

lsmod:

nft_counter            16384  1
nft_reject_inet        16384  3
nf_reject_ipv4         16384  1 nft_reject_inet
nf_reject_ipv6         16384  1 nft_reject_inet
nft_reject             16384  1 nft_reject_inet
nf_conntrack_ipv6      16384  5
nf_defrag_ipv6         36864  1 nf_conntrack_ipv6
nf_conntrack_ipv4      16384  5
nf_defrag_ipv4         16384  1 nf_conntrack_ipv4
nft_meta               16384  17
nft_ct                 20480  5
nf_conntrack          155648  3 nft_ct,nf_conntrack_ipv6,nf_conntrack_ipv4
libcrc32c              16384  1 nf_conntrack
crc32c_generic         16384  0
nf_tables_inet         16384  4
nf_tables_ipv6         16384  1 nf_tables_inet
nf_tables_ipv4         16384  1 nf_tables_inet
nf_tables             106496  79 nft_ct,nft_reject,nf_tables_ipv6,nf_tables_ipv4,nft_reject_inet,nft_meta,nft_counter,nf_tables_inet
cfg80211              733184  0
rfkill                 28672  2 cfg80211
nfnetlink              16384  1 nf_tables
jc42                   16384  0
nls_iso8859_1          16384  1
nls_cp437              20480  1
vfat                   20480  1
fat                    77824  1 vfat
amd64_edac_mod         28672  0
amdkfd                151552  1
edac_mce_amd           28672  1 amd64_edac_mod
amd_iommu_v2           20480  1 amdkfd
tg3                   188416  0
kvm_amd                90112  0
ptp                    20480  1 tg3
pps_core               20480  1 ptp
libphy                 73728  1 tg3
amdgpu               3104768  8
kvm                   700416  1 kvm_amd
joydev                 24576  0
mousedev               24576  0
input_leds             16384  0
led_class              16384  1 input_leds
snd_hda_codec_hdmi     57344  1
snd_hda_intel          45056  2
snd_hda_codec         151552  2 snd_hda_intel,snd_hda_codec_hdmi
irqbypass              16384  1 kvm
snd_hda_core           94208  3 snd_hda_intel,snd_hda_codec,snd_hda_codec_hdmi
snd_hwdep              20480  1 snd_hda_codec
snd_pcm               135168  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
crct10dif_pclmul       16384  0
chash                  16384  1 amdgpu
crc32_pclmul           16384  0
ttm                   118784  1 amdgpu
snd_timer              36864  1 snd_pcm
ghash_clmulni_intel    16384  0
snd                    98304  10 snd_hda_intel,snd_hwdep,snd_hda_codec,snd_timer,snd_hda_codec_hdmi,snd_pcm
pcbc                   16384  0
soundcore              16384  1 snd
drm_kms_helper        200704  1 amdgpu
aesni_intel           188416  0
drm                   466944  8 amdgpu,ttm,drm_kms_helper
aes_x86_64             20480  1 aesni_intel
crypto_simd            16384  1 aesni_intel
glue_helper            16384  1 aesni_intel
agpgart                49152  2 ttm,drm
cryptd                 28672  3 crypto_simd,ghash_clmulni_intel,aesni_intel
syscopyarea            16384  1 drm_kms_helper
sysfillrect            16384  1 drm_kms_helper
sysimgblt              16384  1 drm_kms_helper
k10temp                16384  0
fb_sys_fops            16384  1 drm_kms_helper
shpchp                 40960  0
i2c_algo_bit           16384  1 amdgpu
fam15h_power           16384  0
rtc_cmos               24576  1
sp5100_tco             16384  0
i2c_piix4              24576  0
pinctrl_amd            28672  3
8250_dw                16384  0
evdev                  24576  7
mac_hid                16384  0
acpi_cpufreq           24576  0
sch_fq_codel           20480  3
ip_tables              28672  0
x_tables               45056  1 ip_tables
ext4                  708608  5
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                  118784  1 ext4
fscrypto               32768  1 ext4
ses                    20480  0
enclosure              16384  1 ses
scsi_transport_sas     45056  1 ses
sd_mod                 61440  12
hid_logitech_hidpp     36864  0
uas                    28672  0
usb_storage            73728  3 uas
hid_logitech_dj        24576  0
usbhid                 57344  0
hid                   131072  3 usbhid,hid_logitech_dj,hid_logitech_hidpp
ahci                   40960  5
ehci_pci               16384  0
libahci                40960  1 ahci
xhci_pci               16384  0
ehci_hcd               94208  1 ehci_pci
xhci_hcd              258048  1 xhci_pci
libata                278528  2 ahci,libahci
crc32c_intel           24576  1
usbcore               286720  7 usbhid,usb_storage,ehci_hcd,xhci_pci,uas,xhci_hcd,ehci_pci
usb_common             16384  1 usbcore
scsi_mod              258048  6 sd_mod,ses,usb_storage,scsi_transport_sas,libata,uas

lscpu:

Architecture:        x86_64
CPU op-mode(s):      32-bit, 64-bit
Byte Order:          Little Endian
CPU(s):              4
On-line CPU(s) list: 0-3
Thread(s) per core:  2
Core(s) per socket:  2
Socket(s):           1
NUMA node(s):        1
Vendor ID:           AuthenticAMD
CPU family:          21
Model:               96
Model name:          AMD Opteron(tm) X3421 APU
Stepping:            1
CPU MHz:             3264.817
CPU max MHz:         2100.0000
CPU min MHz:         1400.0000
BogoMIPS:            4191.76
Virtualization:      AMD-V
L1d cache:           32K
L1i cache:           96K
L2 cache:            1024K
NUMA node0 CPU(s):   0-3
Flags:               fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt pdpe1gb rdtscp lm constant_tsc rep_good acc_power nopl nonstop_tsc cpuid extd_apicid aperfmperf pni pclmulqdq monitor ssse3 fma cx16 sse4_1 sse4_2 movbe popcnt aes xsave avx f16c rdrand lahf_lm cmp_legacy svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch osvw ibs xop skinit wdt lwp fma4 tce nodeid_msr tbm topoext perfctr_core perfctr_nb bpext ptsc mwaitx cpb hw_pstate retpoline retpoline_amd vmmcall fsgsbase bmi1 avx2 smep bmi2 xsaveopt arat npt lbrv svm_lock nrip_save tsc_scale vmcb_clean flushbyasid decodeassists pausefilter pfthreshold avic v_vmsave_vmload vgif overflow_recov

lspci gpu:

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1576
        Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1576
        Flags: bus master, fast devsel, latency 0

00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Device 1577
        Subsystem: Advanced Micro Devices, Inc. [AMD] Device 1577
        Flags: fast devsel, IRQ 24
        Capabilities: <access denied>

00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo (rev 84) (prog-if 00 [VGA controller])
        Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Carrizo
        Flags: bus master, fast devsel, latency 0, IRQ 43
        Memory at e0000000 (64-bit, prefetchable) [size=256M]
        Memory at f0000000 (64-bit, prefetchable) [size=8M]
        I/O ports at f000 [size=256]
        Memory at feb00000 (32-bit, non-prefetchable) [size=256K]
        Expansion ROM at 000c0000 [disabled] [size=128K]
        Capabilities: <access denied>
        Kernel driver in use: amdgpu
        Kernel modules: amdgpu

related driver installed:

[cmos@arch_shcmos: /home/cmos]$ pacman -Qs xf86
local/libxxf86vm 1.1.4-1
    X11 XFree86 video mode extension library
local/xf86-input-libinput 0.26.0-1 (xorg-drivers)
    Generic input driver for the X.Org server based on libinput
local/xf86-video-amdgpu 1.4.0-1 (xorg-drivers)
    X.org amdgpu video driver
local/xf86vidmodeproto 2.3.1-3
    X11 Video Mode extension wire protocol
[cmos@arch_shcmos: /home/cmos]$ pacman -Qs mesa
local/glu 9.0.0-4
    Mesa OpenGL Utility library
local/mesa 17.3.3-2
    an open-source implementation of the OpenGL specification
local/mesa-demos 8.3.0-4
    Mesa demos and tools incl. glxinfo + glxgears
local/mesa-vdpau 17.3.3-2
    Mesa VDPAU drivers
local/vulkan-radeon 17.3.3-2
    Radeon's Vulkan mesa driver

Thanks for your help.

Last edited by cmos3511 (2018-02-07 02:39:46)

Offline

#2 2018-02-07 18:39:45

Asseon
Member
Registered: 2014-07-23
Posts: 8

Re: Xorg freezes on amdgpu usage

Have you tried downgrading xorg to 1.19.6-2?

That's what I'm  trying right now, though I can not say for sure if this works since the bug is playing hide and seek with me.

Offline

#3 2018-02-07 18:45:25

toga
Member
From: Hungary
Registered: 2015-01-10
Posts: 4

Re: Xorg freezes on amdgpu usage

Add amdgpu.dc=0 to the boot parameters.

Offline

#4 2018-02-07 19:16:22

Asseon
Member
Registered: 2014-07-23
Posts: 8

Re: Xorg freezes on amdgpu usage

dc was added with 4.15 but cmos3511 said the problem also exists with 4.14.

Offline

#5 2018-02-08 07:04:40

cmos3511
Member
Registered: 2012-12-19
Posts: 6

Re: Xorg freezes on amdgpu usage

Asseon wrote:

Have you tried downgrading xorg to 1.19.6-2?

That's what I'm  trying right now, though I can not say for sure if this works since the bug is playing hide and seek with me.

Hi Asseon, not yet, maybe I can have a try. I am currently trying using DRI 2 or disabling glamor to find out the cause.

Offline

#6 2018-02-08 07:06:40

cmos3511
Member
Registered: 2012-12-19
Posts: 6

Re: Xorg freezes on amdgpu usage

toga wrote:

Add amdgpu.dc=0 to the boot parameters.

Hi toga, as Asseon said, this issue existed on kernel 4.14 which had no dc added.

Offline

#7 2018-02-09 03:14:04

cmos3511
Member
Registered: 2012-12-19
Posts: 6

Re: Xorg freezes on amdgpu usage

Using DRI 2 has no effect and X freezes as usual.

Disabling glamer by setting AccelMethod none does not freeze X anymore, only the browser freezes.
The other porcesses can be launched and the frozen process can be terminated.
However, since the 2D acceleration is disabled, the display is lagged and cpu usage will be quite high.

It seems the glamor issue of Xorg.

Offline

#8 2018-02-09 11:12:21

toga
Member
From: Hungary
Registered: 2015-01-10
Posts: 4

Re: Xorg freezes on amdgpu usage

cmos3511 wrote:
toga wrote:

Add amdgpu.dc=0 to the boot parameters.

Hi toga, as Asseon said, this issue existed on kernel 4.14 which had no dc added.

Really, you are right!

Offline

#9 2018-02-12 00:39:10

smuzful
Member
Registered: 2018-02-12
Posts: 2

Re: Xorg freezes on amdgpu usage

I have similiar issue on the same hardware (AMD Opteron X3421 APU; Carrizo gpu). I can reproduce it by clicking on date in Gnome, or enabling terminal, webbrowser. I was able to reproduce issue on XFCE4 and also on Wayland only (using Weston) by starting chromium.

I am not pasting outputs of dmesg, Xorg.log, because they look the same. What do you think about line below. I see it in mine and cmos3511 dmesg output.

[drm:hwss_wait_for_blank_complete [amdgpu]] *ERROR* DC: failed to blank crtc!

I have tried with Fedora live CD (Linux kernel 4.13) and everything work fine, but after installation and upgrade to kernel (4.14). I had the same issue.

Now I have reinstalled Arch (base installation) once again and tried without any additional GPU packets (default amdgpu). Issue is the same. I have also tried also https://support.hpe.com/hpsc/doc/public … 21847en_us, but nothing changed.

Offline

#10 2018-02-16 10:50:40

cmos3511
Member
Registered: 2012-12-19
Posts: 6

Re: Xorg freezes on amdgpu usage

smuzful wrote:

[drm:hwss_wait_for_blank_complete [amdgpu]] *ERROR* DC: failed to blank crtc!

This error occurs after the kernel 4.15, and not for  kernel 4.14.

BTW. Have you also enabled the iommu BIOS option, and added the iommu=pt kernel parameters?

Offline

#11 2018-02-16 17:27:26

smuzful
Member
Registered: 2018-02-12
Posts: 2

Re: Xorg freezes on amdgpu usage

cmos3511 wrote:

Have you also enabled the iommu BIOS option, and added the iommu=pt kernel parameters?

Yes, I did enable it, but I checked it both ways and the issue is not related to iommu.

Offline

#12 2018-03-05 15:36:41

jeroof
Member
Registered: 2018-03-05
Posts: 1

Re: Xorg freezes on amdgpu usage

Hi cmos3511, would you mind sharing your 4.15 kernel config? From your logs it seems I'm using the same APU and seems I'm having issues getting drm to start.

Offline

#13 2018-03-10 10:57:00

cmos3511
Member
Registered: 2012-12-19
Posts: 6

Re: Xorg freezes on amdgpu usage

jeroof wrote:

Hi cmos3511, would you mind sharing your 4.15 kernel config? From your logs it seems I'm using the same APU and seems I'm having issues getting drm to start.

Hi jeroof, my kernel parameters are "amd_iommu=on iommu=pt amdgpu.dc=1", and actually only "iommu=pt" is needed for the latest kernel.

My kernel config is the arch default without any modifications.

Offline

Board footer

Powered by FluxBB