You are not logged in.

#326 2018-03-13 14:41:41

wolfhoundjesse
Member
Registered: 2018-02-23
Posts: 3

Re: Dell XPS 15 9560 (Early 2017)

I missed the part where it says installing the Intel drivers is optional and not recommended. I removed them, and after some tweaking, I now have two external displays without the laptop display working again, albeit with scaling because they aren't 4k monitors. I'm ordering an LG 43" 4k this week to solve that issue. Thanks again for your suggestions!

Offline

#327 2018-04-07 10:37:08

cookiemonster
Member
Registered: 2017-06-02
Posts: 4

Re: Dell XPS 15 9560 (Early 2017)

Hey everyone,

it's been a long time since my last post here, since everything was working perfectly. If anyone is reading, throw out the shitty killer wifi card and get yourselves an intel card. That solved at least the network performance issues, if not a few things more.

None the less, I did an package upgrade lately, it was pretty big with a lot of packets to be updated. Since this update I cannot connect external displays during runtime anymore. My setup was working fine. I am was able to connect my two displays without a lot of hassle.

One is connected via TB to DisplayPort the otherone via HDMI to DVI. Since the update my laptop freezes as soon as I connect the displays during runtime. Booting with the displays pre-connected is working fine (more or less).

Anyone else having this problem? This is what happens in journalctl around the time of connecting the displays:

Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: [8086:1576] type 01 class 0x060400
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: enabling Extended Tags
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: supports D1 D2
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 07 12:43:53 motoko kernel: pci 0000:07:00.0: [8086:1576] type 01 class 0x060400
Apr 07 12:43:53 motoko kernel: pci 0000:07:00.0: enabling Extended Tags
Apr 07 12:43:53 motoko kernel: pci 0000:07:00.0: supports D1 D2
Apr 07 12:43:53 motoko kernel: pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: [8086:1576] type 01 class 0x060400
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: enabling Extended Tags
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: supports D1 D2
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: [8086:1576] type 01 class 0x060400
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: enabling Extended Tags
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: supports D1 D2
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: PCI bridge to [bus 07-3e]
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0:   bridge window [mem 0xd4000000-0xea0fffff]
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
Apr 07 12:43:53 motoko kernel: pci 0000:07:00.0: PCI bridge to [bus 08]
Apr 07 12:43:53 motoko kernel: pci 0000:07:00.0:   bridge window [mem 0xea000000-0xea0fffff]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: PCI bridge to [bus 09-3d]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0:   bridge window [mem 0xd4000000-0xe9efffff]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
Apr 07 12:43:53 motoko kernel: pci 0000:3e:00.0: [8086:15b5] type 00 class 0x0c0330
Apr 07 12:43:53 motoko kernel: pci 0000:3e:00.0: reg 0x10: [mem 0xe9f00000-0xe9f0ffff]
Apr 07 12:43:53 motoko kernel: pci 0000:3e:00.0: enabling Extended Tags
Apr 07 12:43:53 motoko kernel: pci 0000:3e:00.0: supports D1 D2
Apr 07 12:43:53 motoko kernel: pci 0000:3e:00.0: PME# supported from D0 D1 D2 D3hot D3cold
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: PCI bridge to [bus 3e]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0:   bridge window [mem 0xe9f00000-0xe9ffffff]
Apr 07 12:43:53 motoko kernel: pci_bus 0000:07: Allocating resources
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: bridge window [io  0x1000-0x0fff] to [bus 09-3d] add_size 1000
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: bridge window [io  0x1000-0x0fff] to [bus 3e] add_size 1000
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 3e] add_size 200000 add_align 100000
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: bridge window [io  0x1000-0x0fff] to [bus 07-3e] add_size 2000
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: BAR 13: no space for [io  size 0x2000]
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: BAR 13: failed to assign [io  size 0x2000]
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: BAR 13: no space for [io  size 0x2000]
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: BAR 13: failed to assign [io  size 0x2000]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: BAR 13: no space for [io  size 0x1000]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: BAR 13: failed to assign [io  size 0x1000]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: BAR 13: no space for [io  size 0x1000]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: BAR 13: failed to assign [io  size 0x1000]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: BAR 13: no space for [io  size 0x1000]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: BAR 13: failed to assign [io  size 0x1000]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: BAR 13: no space for [io  size 0x1000]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: BAR 13: failed to assign [io  size 0x1000]
Apr 07 12:43:53 motoko kernel: pci 0000:07:00.0: PCI bridge to [bus 08]
Apr 07 12:43:53 motoko kernel: pci 0000:07:00.0:   bridge window [mem 0xea000000-0xea0fffff]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0: PCI bridge to [bus 09-3d]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0:   bridge window [mem 0xd4000000-0xe9efffff]
Apr 07 12:43:53 motoko kernel: pci 0000:07:01.0:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0: PCI bridge to [bus 3e]
Apr 07 12:43:53 motoko kernel: pci 0000:07:02.0:   bridge window [mem 0xe9f00000-0xe9ffffff]
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0: PCI bridge to [bus 07-3e]
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0:   bridge window [mem 0xd4000000-0xea0fffff]
Apr 07 12:43:53 motoko kernel: pci 0000:06:00.0:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
Apr 07 12:43:53 motoko kernel: xhci_hcd 0000:3e:00.0: xHCI Host Controller
Apr 07 12:43:53 motoko kernel: xhci_hcd 0000:3e:00.0: new USB bus registered, assigned bus number 3
Apr 07 12:43:53 motoko kernel: xhci_hcd 0000:3e:00.0: hcc params 0x200077c1 hci version 0x110 quirks 0x00009810
Apr 07 12:43:53 motoko kernel: usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
Apr 07 12:43:53 motoko kernel: usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 07 12:43:53 motoko kernel: usb usb3: Product: xHCI Host Controller
Apr 07 12:43:53 motoko kernel: usb usb3: Manufacturer: Linux 4.15.14-1-ARCH xhci-hcd
Apr 07 12:43:53 motoko kernel: usb usb3: SerialNumber: 0000:3e:00.0
Apr 07 12:43:53 motoko kernel: hub 3-0:1.0: USB hub found
Apr 07 12:43:53 motoko kernel: hub 3-0:1.0: 2 ports detected
Apr 07 12:43:53 motoko kernel: xhci_hcd 0000:3e:00.0: xHCI Host Controller
Apr 07 12:43:53 motoko kernel: xhci_hcd 0000:3e:00.0: new USB bus registered, assigned bus number 4
Apr 07 12:43:53 motoko kernel: xhci_hcd 0000:3e:00.0: Host supports USB 3.1 Enhanced SuperSpeed
Apr 07 12:43:53 motoko kernel: usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
Apr 07 12:43:53 motoko kernel: usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Apr 07 12:43:53 motoko kernel: usb usb4: Product: xHCI Host Controller
Apr 07 12:43:53 motoko kernel: usb usb4: Manufacturer: Linux 4.15.14-1-ARCH xhci-hcd
Apr 07 12:43:53 motoko kernel: usb usb4: SerialNumber: 0000:3e:00.0
Apr 07 12:43:53 motoko kernel: hub 4-0:1.0: USB hub found
Apr 07 12:43:53 motoko kernel: hub 4-0:1.0: 2 ports detected
Apr 07 12:43:53 motoko colord[890]: /usr/lib/colord-sane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
Apr 07 12:43:53 motoko colord[890]: /usr/lib/colord-sane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
Apr 07 12:43:53 motoko upowerd[1077]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:1d.6/0000:06:00.0/0000:07:02.0/0000:3e:00.0/usb3/3-0:1.0
Apr 07 12:43:53 motoko upowerd[1077]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:1d.6/0000:06:00.0/0000:07:02.0/0000:3e:00.0/usb3
Apr 07 12:43:53 motoko upowerd[1077]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:1d.6/0000:06:00.0/0000:07:02.0/0000:3e:00.0/usb4/4-0:1.0
Apr 07 12:43:53 motoko upowerd[1077]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:1d.6/0000:06:00.0/0000:07:02.0/0000:3e:00.0/usb4
Apr 07 12:43:53 motoko root[1398]: ACPI group/action undefined: jack/lineout / LINEOUT
Apr 07 12:43:53 motoko root[1400]: ACPI group/action undefined: jack/videoout / VIDEOOUT
Apr 07 12:43:54 motoko kernel: usb 3-1: new high-speed USB device number 2 using xhci_hcd
Apr 07 12:43:55 motoko kernel: usb 3-1: New USB device found, idVendor=2109, idProduct=0100
Apr 07 12:43:55 motoko kernel: usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Apr 07 12:43:55 motoko kernel: usb 3-1: Product: USB 2.0 BILLBOARD             
Apr 07 12:43:55 motoko kernel: usb 3-1: Manufacturer: VIA Technologies Inc.         
Apr 07 12:43:55 motoko kernel: usb 3-1: SerialNumber: 0000000000000001
Apr 07 12:43:56 motoko colord[890]: /usr/lib/colord-sane: error while loading shared libraries: libsane.so.1: cannot open shared object file: No such file or directory
Apr 07 12:43:56 motoko upowerd[1077]: unhandled action 'bind' on /sys/devices/pci0000:00/0000:00:1d.6/0000:06:00.0/0000:07:02.0/0000:3e:00.0/usb3/3-1

I got this by switching to the console, and then connecting the displays. That seems to be working fine. I also can switch back to the xserver and that behaves as if I booted with the screens connected.

Last edited by cookiemonster (2018-04-07 10:49:58)

Offline

#328 2018-04-08 08:41:25

randm
Member
Registered: 2017-02-19
Posts: 11

Re: Dell XPS 15 9560 (Early 2017)

Yes, this is a common problem, you can use Xorg in the meantime as a workaround (problem is caused by Wayland). A bug report can be found here: https://gitlab.gnome.org/GNOME/mutter/issues/93
Your logs look a bit different to the ones in the issue description though, maybe you should submit them there as well.

Offline

#329 2018-05-06 22:44:15

sawyerbergeron
Member
Registered: 2015-12-05
Posts: 30

Re: Dell XPS 15 9560 (Early 2017)

I recently reinstalled arch on my 9560 and have run into some weird power management issues since. For some reason the first install had everything working correctly power management wise, it would stay at around 4 watts idle and go up to 10 with moderate use. After the reinstall things work correctly until I suspend and then resume. After doing so, power usage is consistent with the dGPU not being actually powered off. I've tried both the ACPI method and the bumblebee+bbswitch method mentioned in the wiki entry for the 9560, but to no avail. I really don't care too much about being able to use the dGPU, but I do want to have it consistently stay off when I'm not actively wanting to use it. Here's the output from dmesg, if there's any other info that would be helpful let me know:

[    0.000000] Linux version 4.16.6-1-ARCH (builduser@heftig-20360) (gcc version 7.3.1 20180406 (GCC)) #1 SMP PREEMPT Mon Apr 30 12:30:03 UTC 2018
[    0.000000] Command line: \\boot\vmlinuz-linux ro root=UUID=4dac6d60-9f5c-4bfb-85c1-26214fd315c0  acpi_rev_override=1 disable_power_well=0 enable_fbc=1 enable_psr=1 initrd=boot\initramfs-linux.img
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] Intel Spectre v2 broken microcode detected; disabling Speculation Control
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: xstate_offset[3]:  832, xstate_sizes[3]:   64
[    0.000000] x86/fpu: xstate_offset[4]:  896, xstate_sizes[4]:   64
[    0.000000] x86/fpu: Enabled xstate features 0x1f, context size is 960 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006a15cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000006a15d000-0x000000006a15dfff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006a15e000-0x000000006a15efff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006a15f000-0x000000007845bfff] usable
[    0.000000] BIOS-e820: [mem 0x000000007845c000-0x0000000078818fff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000078819000-0x000000007885efff] ACPI data
[    0.000000] BIOS-e820: [mem 0x000000007885f000-0x0000000078f3ffff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x0000000078f40000-0x00000000795fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000795ff000-0x00000000795fffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000079600000-0x000000007f7fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027e7fffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0x63762018-0x6378b257] usable ==> usable
[    0.000000] e820: update [mem 0x63762018-0x6378b257] usable ==> usable
[    0.000000] e820: update [mem 0x63751018-0x63761057] usable ==> usable
[    0.000000] e820: update [mem 0x63751018-0x63761057] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
[    0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009efff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009f000-0x00000000000fffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x0000000063751017] usable
[    0.000000] reserve setup_data: [mem 0x0000000063751018-0x0000000063761057] usable
[    0.000000] reserve setup_data: [mem 0x0000000063761058-0x0000000063762017] usable
[    0.000000] reserve setup_data: [mem 0x0000000063762018-0x000000006378b257] usable
[    0.000000] reserve setup_data: [mem 0x000000006378b258-0x000000006a15cfff] usable
[    0.000000] reserve setup_data: [mem 0x000000006a15d000-0x000000006a15dfff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x000000006a15e000-0x000000006a15efff] reserved
[    0.000000] reserve setup_data: [mem 0x000000006a15f000-0x000000007845bfff] usable
[    0.000000] reserve setup_data: [mem 0x000000007845c000-0x0000000078818fff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000078819000-0x000000007885efff] ACPI data
[    0.000000] reserve setup_data: [mem 0x000000007885f000-0x0000000078f3ffff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x0000000078f40000-0x00000000795fefff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000795ff000-0x00000000795fffff] usable
[    0.000000] reserve setup_data: [mem 0x0000000079600000-0x000000007f7fffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000f0000000-0x00000000f7ffffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000027e7fffff] usable
[    0.000000] efi: EFI v2.40 by American Megatrends
[    0.000000] efi:  ACPI=0x78827000  ACPI 2.0=0x78827000  SMBIOS=0x79368000  SMBIOS 3.0=0x79367000  ESRT=0x792d7018  MPS=0xfcbe0  MEMATTR=0x75e36018  TPMEventLog=0x6378c018 
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: Dell Inc. XPS 15 9560/05FFDN, BIOS 1.7.0 12/15/2017
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x27e800 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask 7F80000000 uncachable
[    0.000000]   1 base 007C000000 mask 7FFC000000 uncachable
[    0.000000]   2 base 007B000000 mask 7FFF000000 uncachable
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0x79600 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fced0-0x000fcedf] mapped at [        (ptrval)]
[    0.000000] esrt: Reserving ESRT space from 0x00000000792d7018 to 0x00000000792d7050.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x5d64f000, 0x5d64ffff] PGTABLE
[    0.000000] BRK [0x5d650000, 0x5d650fff] PGTABLE
[    0.000000] BRK [0x5d651000, 0x5d651fff] PGTABLE
[    0.000000] BRK [0x5d652000, 0x5d652fff] PGTABLE
[    0.000000] BRK [0x5d653000, 0x5d653fff] PGTABLE
[    0.000000] BRK [0x5d654000, 0x5d654fff] PGTABLE
[    0.000000] BRK [0x5d655000, 0x5d655fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x63791000-0x63ed7fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x0000000078827000 000024 (v02 DELL  )
[    0.000000] ACPI: XSDT 0x00000000788270D0 000124 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x000000007884CAB0 00010C (v05 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x0000000078827288 025821 (v02 DELL   CBX3     01072009 INTL 20160422)
[    0.000000] ACPI: FACS 0x0000000078F3D180 000040
[    0.000000] ACPI: APIC 0x000000007884CBC0 0000BC (v03 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x000000007884CC80 000044 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x000000007884CCC8 0000AC (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x000000007884CD78 00003C (v01 DELL   CBX3     01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x000000007884CDB8 000038 (v01 DELL   CBX3     01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x000000007884CDF0 0004B8 (v01 SataRe SataTabl 00001000 INTL 20160422)
[    0.000000] ACPI: BOOT 0x000000007884D2A8 000028 (v01 DELL   CBX3     01072009 AMI  00010013)
[    0.000000] ACPI: SSDT 0x000000007884D2D0 0012FE (v02 SaSsdt SaSsdt   00003000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x000000007884E5D0 002959 (v02 PegSsd PegSsdt  00001000 INTL 20160422)
[    0.000000] ACPI: HPET 0x0000000078850F30 000038 (v01 INTEL  KBL      00000001 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x0000000078850F68 000B8C (v02 INTEL  xh_rvp11 00000000 INTL 20160422)
[    0.000000] ACPI: UEFI 0x0000000078851AF8 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x0000000078851B40 000EDE (v02 CpuRef CpuSsdt  00003000 INTL 20160422)
[    0.000000] ACPI: LPIT 0x0000000078852A20 000094 (v01 INTEL  KBL      00000000 MSFT 0000005F)
[    0.000000] ACPI: WSMT 0x0000000078852AB8 000028 (v01 DELL   CBX3     00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x0000000078852AE0 00011E (v02 INTEL  HdaDsp   00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x0000000078852C00 00029F (v02 INTEL  sensrhub 00000000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x0000000078852EA0 003002 (v02 INTEL  PtidDevc 00001000 INTL 20160422)
[    0.000000] ACPI: SSDT 0x0000000078855EA8 00050D (v02 INTEL  TbtTypeC 00000000 INTL 20160422)
[    0.000000] ACPI: DBGP 0x00000000788563B8 000034 (v01 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000788563F0 000054 (v00 INTEL           00000002 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x0000000078856448 005322 (v02 DptfTa DptfTabl 00001000 INTL 20160422)
[    0.000000] ACPI: MSDM 0x000000007885B770 000055 (v03 DELL   CBX3     06222004 AMI  00010013)
[    0.000000] ACPI: SLIC 0x000000007885B7C8 000176 (v03 DELL   CBX3     01072009 MSFT 00010013)
[    0.000000] ACPI: SSDT 0x000000007885B940 0000AE (v02 SgRef  SgPeg    00001000 INTL 20160422)
[    0.000000] ACPI: NHLT 0x000000007885B9F0 00002D (v00 INTEL  EDK2     00000002      01000013)
[    0.000000] ACPI: TPM2 0x000000007885BA20 000034 (v03        Tpm2Tabl 00000001 AMI  00000000)
[    0.000000] ACPI: SSDT 0x000000007885BA58 001C70 (v01 OptRef OptTabl  00001000 INTL 20160422)
[    0.000000] ACPI: ASF! 0x000000007885D6C8 0000A0 (v32 INTEL   HCG     00000001 TFSM 000F4240)
[    0.000000] ACPI: DMAR 0x000000007885D768 0000F0 (v01 INTEL  KBL      00000001 INTL 00000001)
[    0.000000] ACPI: BGRT 0x000000007885D858 000038 (v00 \xf3\xee              01072009 AMI  00010013)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000027e7fffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x27e7fa000-0x27e7fdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027e7fffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x0000000000057fff]
[    0.000000]   node   0: [mem 0x0000000000059000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000006a15cfff]
[    0.000000]   node   0: [mem 0x000000006a15f000-0x000000007845bfff]
[    0.000000]   node   0: [mem 0x00000000795ff000-0x00000000795fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000027e7fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027e7fffff]
[    0.000000] On node 0 totalpages: 2059256
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 24 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 7634 pages used for memmap
[    0.000000]   DMA32 zone: 488539 pages, LIFO batch:31
[    0.000000]   Normal zone: 24480 pages used for memmap
[    0.000000]   Normal zone: 1566720 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 99 pages
[    0.000000] Reserving Intel graphics memory at [mem 0x7b800000-0x7f7fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x63751000-0x63751fff]
[    0.000000] PM: Registered nosave memory: [mem 0x63761000-0x63761fff]
[    0.000000] PM: Registered nosave memory: [mem 0x63762000-0x63762fff]
[    0.000000] PM: Registered nosave memory: [mem 0x6378b000-0x6378bfff]
[    0.000000] PM: Registered nosave memory: [mem 0x6a15d000-0x6a15dfff]
[    0.000000] PM: Registered nosave memory: [mem 0x6a15e000-0x6a15efff]
[    0.000000] PM: Registered nosave memory: [mem 0x7845c000-0x78818fff]
[    0.000000] PM: Registered nosave memory: [mem 0x78819000-0x7885efff]
[    0.000000] PM: Registered nosave memory: [mem 0x7885f000-0x78f3ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x78f40000-0x795fefff]
[    0.000000] PM: Registered nosave memory: [mem 0x79600000-0x7f7fffff]
[    0.000000] PM: Registered nosave memory: [mem 0x7f800000-0xefffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0x7f800000-0xefffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x96/0x4dc with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2027054
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: \\boot\vmlinuz-linux ro root=UUID=4dac6d60-9f5c-4bfb-85c1-26214fd315c0  acpi_rev_override=1 disable_power_well=0 enable_fbc=1 enable_psr=1 initrd=boot\initramfs-linux.img
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7965572K/8237024K available (10252K kernel code, 1264K rwdata, 3372K rodata, 1464K init, 640K bss, 271452K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 31750 entries in 125 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000]  RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000]  RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000]  RCU priority boosting: priority 1 delay 500 ms.
[    0.000000]  Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 2048, preallocated irqs: 16
[    0.000000]  Offload RCU callbacks from CPUs: .
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: Overriding _REV return value to 5
[    0.000000] ACPI BIOS Error (bug): Failure looking up [\_SB.PCI0.XHC.RHUB.HS11], AE_NOT_FOUND (20180105/dswload-211)
[    0.000000] ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180105/psobject-252)
[    0.000000] ACPI Error: AE_NOT_FOUND, (SSDT:xh_rvp11) while loading table (20180105/tbxfload-228)
[    0.000000] ACPI Error: 1 table load failures, 12 successful (20180105/tbxfload-246)
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] APIC: Switch to symmetric I/O mode setup
[    0.003333] DMAR: Host address width 39
[    0.003333] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.003333] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
[    0.003333] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.003333] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
[    0.003333] DMAR: RMRR base: 0x00000078534000 end: 0x00000078553fff
[    0.003333] DMAR: RMRR base: 0x0000007b000000 end: 0x0000007f7fffff
[    0.003333] DMAR: ANDD device: 1 name: \_SB.PCI0.I2C0
[    0.003333] DMAR: ANDD device: 2 name: \_SB.PCI0.I2C1
[    0.003333] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.003333] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.003333] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
[    0.003333] DMAR: DRHD: handling fault status reg 2
[    0.003333] DMAR: [INTR-REMAP] Request device [f0:1f.0] fault index 0 [fault reason 37] Blocked a compatibility format interrupt request
[    0.003333] DMAR-IR: Enabled IRQ remapping in x2apic mode
[    0.003333] x2apic enabled
[    0.003333] Switched APIC routing to cluster x2apic.
[    0.006666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.023333] tsc: Detected 2800.000 MHz processor
[    0.023333] tsc: Detected 2808.000 MHz TSC
[    0.023333] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    0.023333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.00 BogoMIPS (lpj=9360000)
[    0.023333] pid_max: default: 32768 minimum: 301
[    0.023333] Security Framework initialized
[    0.023333] Yama: becoming mindful.
[    0.023333] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.023333] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.023333] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023333] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.023333] CPU: Physical Processor ID: 0
[    0.023333] CPU: Processor Core ID: 0
[    0.023333] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.023333] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.023333] mce: CPU supports 10 MCE banks
[    0.023333] CPU0: Thermal monitoring enabled (TM1)
[    0.023333] process: using mwait in idle threads
[    0.023333] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.023333] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.023333] Spectre V2 : Mitigation: Full generic retpoline
[    0.023333] Spectre V2 : Spectre v2 mitigation: Filling RSB on context switch
[    0.023333] Freeing SMP alternatives memory: 24K
[    0.030143] TSC deadline timer enabled
[    0.030148] smpboot: CPU0: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (family: 0x6, model: 0x9e, stepping: 0x9)
[    0.043351] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.043412] ... version:                4
[    0.043413] ... bit width:              48
[    0.043413] ... generic registers:      4
[    0.043414] ... value mask:             0000ffffffffffff
[    0.043415] ... max period:             00007fffffffffff
[    0.043415] ... fixed-purpose events:   3
[    0.043416] ... event mask:             000000070000000f
[    0.050008] Hierarchical SRCU implementation.
[    0.070246] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.076673] smp: Bringing up secondary CPUs ...
[    0.106694] x86: Booting SMP configuration:
[    0.106697] .... node  #0, CPUs:      #1 #2 #3 #4 #5 #6 #7
[    0.287077] smp: Brought up 1 node, 8 CPUs
[    0.287077] smpboot: Max logical packages: 1
[    0.287077] smpboot: Total of 8 processors activated (44945.00 BogoMIPS)
[    0.290288] devtmpfs: initialized
[    0.290288] x86/mm: Memory block size: 128MB
[    0.290582] PM: Registering ACPI NVS region [mem 0x6a15d000-0x6a15dfff] (4096 bytes)
[    0.290582] PM: Registering ACPI NVS region [mem 0x7885f000-0x78f3ffff] (7213056 bytes)
[    0.290582] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.290582] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.290582] pinctrl core: initialized pinctrl subsystem
[    0.290582] RTC time: 22:32:24, date: 05/06/18
[    0.290582] NET: Registered protocol family 16
[    0.290582] cpuidle: using governor ladder
[    0.290582] cpuidle: using governor menu
[    0.290582] Simple Boot Flag at 0x47 set to 0x80
[    0.290582] KVM setup pv remote TLB flush
[    0.290582] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.290582] ACPI: bus type PCI registered
[    0.290582] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.290582] PCI: MMCONFIG for domain 0000 [bus 00-7f] at [mem 0xf0000000-0xf7ffffff] (base 0xf0000000)
[    0.290582] PCI: MMCONFIG at [mem 0xf0000000-0xf7ffffff] reserved in E820
[    0.290582] PCI: Using configuration type 1 for base access
[    0.290836] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.290836] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.290836] ACPI: Added _OSI(Module Device)
[    0.290836] ACPI: Added _OSI(Processor Device)
[    0.290836] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.290836] ACPI: Added _OSI(Processor Aggregator Device)
[    0.294508] ACPI: Executed 38 blocks of module-level executable AML code
[    0.314009] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.323621] ACPI: Dynamic OEM Table Load:
[    0.323628] ACPI: SSDT 0xFFFF9298741AC000 000630 (v02 PmRef  Cpu0Ist  00003000 INTL 20160422)
[    0.323913] ACPI: Executed 1 blocks of module-level executable AML code
[    0.324000] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.325164] ACPI: Dynamic OEM Table Load:
[    0.325169] ACPI: SSDT 0xFFFF9298743B9400 0003FF (v02 PmRef  Cpu0Cst  00003001 INTL 20160422)
[    0.325432] ACPI: Executed 1 blocks of module-level executable AML code
[    0.325976] ACPI: Dynamic OEM Table Load:
[    0.325982] ACPI: SSDT 0xFFFF9298741AE800 00065C (v02 PmRef  ApIst    00003000 INTL 20160422)
[    0.326550] ACPI: Executed 1 blocks of module-level executable AML code
[    0.326793] ACPI: Dynamic OEM Table Load:
[    0.326797] ACPI: SSDT 0xFFFF9298743C1E00 00018A (v02 PmRef  ApCst    00003000 INTL 20160422)
[    0.327060] ACPI: Executed 1 blocks of module-level executable AML code
[    0.330278] ACPI: EC: EC started
[    0.330279] ACPI: EC: interrupt blocked
[    0.334020] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as first EC
[    0.334021] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.334023] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions
[    0.334023] ACPI: Interpreter enabled
[    0.334068] ACPI: (supports S0 S3 S4 S5)
[    0.334069] ACPI: Using IOAPIC for interrupt routing
[    0.334110] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.334853] ACPI: Enabled 8 GPEs in block 00 to 7F
[    0.336982] ACPI: Power Resource [PG00] (on)
[    0.360868] ACPI: Power Resource [PG01] (on)
[    0.361271] ACPI: Power Resource [PG02] (on)
[    0.363700] ACPI: Power Resource [WRST] (on)
[    0.364110] ACPI: Power Resource [WRST] (on)
[    0.364517] ACPI: Power Resource [WRST] (on)
[    0.364923] ACPI: Power Resource [WRST] (on)
[    0.365333] ACPI: Power Resource [WRST] (on)
[    0.365782] ACPI: Power Resource [WRST] (on)
[    0.366320] ACPI: Power Resource [WRST] (on)
[    0.366735] ACPI: Power Resource [WRST] (on)
[    0.367149] ACPI: Power Resource [WRST] (on)
[    0.367565] ACPI: Power Resource [WRST] (on)
[    0.367980] ACPI: Power Resource [WRST] (on)
[    0.368388] ACPI: Power Resource [WRST] (on)
[    0.368794] ACPI: Power Resource [WRST] (on)
[    0.369199] ACPI: Power Resource [WRST] (on)
[    0.369605] ACPI: Power Resource [WRST] (on)
[    0.370012] ACPI: Power Resource [WRST] (on)
[    0.370419] ACPI: Power Resource [WRST] (on)
[    0.371955] ACPI: Power Resource [WRST] (on)
[    0.372364] ACPI: Power Resource [WRST] (on)
[    0.372779] ACPI: Power Resource [WRST] (on)
[    0.393520] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-7e])
[    0.393526] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.393991] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
[    0.394437] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
[    0.394438] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.395341] PCI host bridge to bus 0000:00
[    0.395343] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.395345] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.395346] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.395347] pci_bus 0000:00: root bus resource [mem 0x7f800000-0xefffffff window]
[    0.395348] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.395350] pci_bus 0000:00: root bus resource [bus 00-7e]
[    0.395360] pci 0000:00:00.0: [8086:5910] type 00 class 0x060000
[    0.395498] pci 0000:00:01.0: [8086:1901] type 01 class 0x060400
[    0.395538] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.395742] pci 0000:00:02.0: [8086:591b] type 00 class 0x030000
[    0.395752] pci 0000:00:02.0: reg 0x10: [mem 0xeb000000-0xebffffff 64bit]
[    0.395757] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[    0.395761] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.395776] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.395915] pci 0000:00:04.0: [8086:1903] type 00 class 0x118000
[    0.395926] pci 0000:00:04.0: reg 0x10: [mem 0xedd20000-0xedd27fff 64bit]
[    0.396150] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.396183] pci 0000:00:14.0: reg 0x10: [mem 0xedd10000-0xedd1ffff 64bit]
[    0.396283] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.396516] pci 0000:00:14.2: [8086:a131] type 00 class 0x118000
[    0.396544] pci 0000:00:14.2: reg 0x10: [mem 0xedd38000-0xedd38fff 64bit]
[    0.396818] pci 0000:00:15.0: [8086:a160] type 00 class 0x118000
[    0.397081] pci 0000:00:15.0: reg 0x10: [mem 0xedd37000-0xedd37fff 64bit]
[    0.397991] pci 0000:00:15.1: [8086:a161] type 00 class 0x118000
[    0.398242] pci 0000:00:15.1: reg 0x10: [mem 0xedd36000-0xedd36fff 64bit]
[    0.399005] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.399030] pci 0000:00:16.0: reg 0x10: [mem 0xedd35000-0xedd35fff 64bit]
[    0.399104] pci 0000:00:16.0: PME# supported from D3hot
[    0.399303] pci 0000:00:17.0: [8086:a103] type 00 class 0x010601
[    0.399336] pci 0000:00:17.0: reg 0x10: [mem 0xedd30000-0xedd31fff]
[    0.399345] pci 0000:00:17.0: reg 0x14: [mem 0xedd34000-0xedd340ff]
[    0.399370] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.399386] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.399394] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.399421] pci 0000:00:17.0: reg 0x24: [mem 0xedd33000-0xedd337ff]
[    0.399504] pci 0000:00:17.0: PME# supported from D3hot
[    0.399671] pci 0000:00:1c.0: [8086:a110] type 01 class 0x060400
[    0.399772] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.399972] pci 0000:00:1c.1: [8086:a111] type 01 class 0x060400
[    0.400066] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.400284] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.400383] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.400585] pci 0000:00:1d.4: [8086:a11c] type 01 class 0x060400
[    0.400667] pci 0000:00:1d.4: PME# supported from D0 D3hot D3cold
[    0.400857] pci 0000:00:1d.6: [8086:a11e] type 01 class 0x060400
[    0.400959] pci 0000:00:1d.6: PME# supported from D0 D3hot D3cold
[    0.401157] pci 0000:00:1f.0: [8086:a152] type 00 class 0x060100
[    0.401409] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.401427] pci 0000:00:1f.2: reg 0x10: [mem 0xedd2c000-0xedd2ffff]
[    0.401623] pci 0000:00:1f.3: [8086:a171] type 00 class 0x040380
[    0.401652] pci 0000:00:1f.3: reg 0x10: [mem 0xedd28000-0xedd2bfff 64bit]
[    0.401679] pci 0000:00:1f.3: reg 0x20: [mem 0xedd00000-0xedd0ffff 64bit]
[    0.401731] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.401959] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.402020] pci 0000:00:1f.4: reg 0x10: [mem 0xedd32000-0xedd320ff 64bit]
[    0.402090] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.402343] pci 0000:01:00.0: [10de:1c8d] type 00 class 0x030200
[    0.402357] pci 0000:01:00.0: reg 0x10: [mem 0xec000000-0xecffffff]
[    0.402364] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.402372] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.402377] pci 0000:01:00.0: reg 0x24: [io  0xe000-0xe07f]
[    0.402382] pci 0000:01:00.0: reg 0x30: [mem 0xed000000-0xed07ffff pref]
[    0.410013] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.410015] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.410017] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xed0fffff]
[    0.410020] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.410194] pci 0000:02:00.0: [8086:24fd] type 00 class 0x028000
[    0.410266] pci 0000:02:00.0: reg 0x10: [mem 0xedc00000-0xedc01fff 64bit]
[    0.410481] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.420059] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.420066] pci 0000:00:1c.0:   bridge window [mem 0xedc00000-0xedcfffff]
[    0.420259] acpiphp: Slot [1] registered
[    0.420279] pci 0000:03:00.0: [10ec:525a] type 00 class 0xff0000
[    0.420322] pci 0000:03:00.0: reg 0x14: [mem 0xed100000-0xed100fff]
[    0.420461] pci 0000:03:00.0: supports D1 D2
[    0.420463] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.430092] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.430096] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.430100] pci 0000:00:1c.1:   bridge window [mem 0xed100000-0xedafffff]
[    0.430108] pci 0000:00:1c.1:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[    0.430247] pci 0000:04:00.0: [144d:a804] type 00 class 0x010802
[    0.430289] pci 0000:04:00.0: reg 0x10: [mem 0xedb00000-0xedb03fff 64bit]
[    0.440035] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.440042] pci 0000:00:1d.0:   bridge window [mem 0xedb00000-0xedbfffff]
[    0.440175] acpiphp: Slot [1-1] registered
[    0.440180] pci 0000:00:1d.4: PCI bridge to [bus 05]
[    0.440317] pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
[    0.440324] pci 0000:00:1d.6:   bridge window [mem 0xd4000000-0xea0fffff]
[    0.440331] pci 0000:00:1d.6:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[    0.443180] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.443246] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.443312] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.443381] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.443445] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.443510] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.443574] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.443638] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.446221] ACPI: EC: interrupt unblocked
[    0.446238] ACPI: EC: event unblocked
[    0.446267] ACPI: \_SB_.PCI0.LPCB.ECDV: GPE=0x14, EC_CMD/EC_SC=0x934, EC_DATA=0x930
[    0.446269] ACPI: \_SB_.PCI0.LPCB.ECDV: Used as boot DSDT EC to handle transactions and events
[    0.446340] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.446340] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.446340] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.446340] vgaarb: loaded
[    0.446340] EDAC MC: Ver: 3.0.0
[    0.447195] Registered efivars operations
[    0.459340] PCI: Using ACPI for IRQ routing
[    0.465928] PCI: pci_cache_line_size set to 64 bytes
[    0.466191] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[    0.466193] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[    0.466194] e820: reserve RAM buffer [mem 0x63751018-0x63ffffff]
[    0.466195] e820: reserve RAM buffer [mem 0x63762018-0x63ffffff]
[    0.466195] e820: reserve RAM buffer [mem 0x6a15d000-0x6bffffff]
[    0.466196] e820: reserve RAM buffer [mem 0x7845c000-0x7bffffff]
[    0.466197] e820: reserve RAM buffer [mem 0x79600000-0x7bffffff]
[    0.466198] e820: reserve RAM buffer [mem 0x27e800000-0x27fffffff]
[    0.466276] NetLabel: Initializing
[    0.466276] NetLabel:  domain hash size = 128
[    0.466277] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.466288] NetLabel:  unlabeled traffic allowed by default
[    0.466734] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.466739] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.471031] clocksource: Switched to clocksource tsc-early
[    0.477753] VFS: Disk quotas dquot_6.6.0
[    0.477765] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.477814] pnp: PnP ACPI init
[    0.478078] system 00:00: [io  0x0680-0x069f] has been reserved
[    0.478080] system 00:00: [io  0xffff] has been reserved
[    0.478081] system 00:00: [io  0xffff] has been reserved
[    0.478083] system 00:00: [io  0xffff] has been reserved
[    0.478084] system 00:00: [io  0x1800-0x18fe] has been reserved
[    0.478085] system 00:00: [io  0x164e-0x164f] has been reserved
[    0.478089] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.478190] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.478193] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.478211] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.478247] system 00:03: [io  0x1854-0x1857] has been reserved
[    0.478250] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.478414] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.478429] pnp 00:05: Plug and Play ACPI device, IDs DLL07be PNP0f13 (active)
[    0.478693] system 00:06: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.478694] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.478696] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.478697] system 00:06: [mem 0xf0000000-0xf7ffffff] has been reserved
[    0.478698] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.478700] system 00:06: [mem 0xfed90000-0xfed93fff] could not be reserved
[    0.478701] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.478703] system 00:06: [mem 0xff000000-0xffffffff] has been reserved
[    0.478704] system 00:06: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.478706] system 00:06: [mem 0xeffe0000-0xefffffff] has been reserved
[    0.478709] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.478757] system 00:07: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.478758] system 00:07: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.478760] system 00:07: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.478761] system 00:07: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.478762] system 00:07: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.478764] system 00:07: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.478765] system 00:07: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.478768] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.479109] system 00:08: [io  0xff00-0xfffe] has been reserved
[    0.479112] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.480525] system 00:09: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.480527] system 00:09: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.480528] system 00:09: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.480531] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.488113] pnp: PnP ACPI: found 10 devices
[    0.493589] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.493650] pci 0000:00:1d.6: bridge window [io  0x1000-0x0fff] to [bus 06-3e] add_size 1000
[    0.493659] pci 0000:00:1d.6: BAR 13: assigned [io  0x2000-0x2fff]
[    0.493662] pci 0000:00:01.0: PCI bridge to [bus 01]
[    0.493664] pci 0000:00:01.0:   bridge window [io  0xe000-0xefff]
[    0.493667] pci 0000:00:01.0:   bridge window [mem 0xec000000-0xed0fffff]
[    0.493670] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.493677] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.493683] pci 0000:00:1c.0:   bridge window [mem 0xedc00000-0xedcfffff]
[    0.493694] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.493698] pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
[    0.493704] pci 0000:00:1c.1:   bridge window [mem 0xed100000-0xedafffff]
[    0.493709] pci 0000:00:1c.1:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[    0.493717] pci 0000:00:1d.0: PCI bridge to [bus 04]
[    0.493723] pci 0000:00:1d.0:   bridge window [mem 0xedb00000-0xedbfffff]
[    0.493734] pci 0000:00:1d.4: PCI bridge to [bus 05]
[    0.493750] pci 0000:00:1d.6: PCI bridge to [bus 06-3e]
[    0.493753] pci 0000:00:1d.6:   bridge window [io  0x2000-0x2fff]
[    0.493759] pci 0000:00:1d.6:   bridge window [mem 0xd4000000-0xea0fffff]
[    0.493764] pci 0000:00:1d.6:   bridge window [mem 0x90000000-0xb1ffffff 64bit pref]
[    0.493773] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.493775] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.493777] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.493779] pci_bus 0000:00: resource 7 [mem 0x7f800000-0xefffffff window]
[    0.493781] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.493783] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.493785] pci_bus 0000:01: resource 1 [mem 0xec000000-0xed0fffff]
[    0.493787] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.493789] pci_bus 0000:02: resource 1 [mem 0xedc00000-0xedcfffff]
[    0.493791] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.493793] pci_bus 0000:03: resource 1 [mem 0xed100000-0xedafffff]
[    0.493795] pci_bus 0000:03: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
[    0.493797] pci_bus 0000:04: resource 1 [mem 0xedb00000-0xedbfffff]
[    0.493799] pci_bus 0000:06: resource 0 [io  0x2000-0x2fff]
[    0.493801] pci_bus 0000:06: resource 1 [mem 0xd4000000-0xea0fffff]
[    0.493803] pci_bus 0000:06: resource 2 [mem 0x90000000-0xb1ffffff 64bit pref]
[    0.494280] NET: Registered protocol family 2
[    0.494444] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.494467] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.494564] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.494647] TCP: Hash tables configured (established 65536 bind 65536)
[    0.494671] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.494688] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.494731] NET: Registered protocol family 1
[    0.494743] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.496138] PCI: CLS 0 bytes, default 64
[    0.496168] Unpacking initramfs...
[    0.600431] Freeing initrd memory: 7452K
[    0.600467] DMAR: ACPI device "device:6e" under DMAR at fed91000 as 00:15.0
[    0.600470] DMAR: ACPI device "device:6f" under DMAR at fed91000 as 00:15.1
[    0.600483] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.600486] software IO TLB [mem 0x713bc000-0x753bc000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    0.600524] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    0.600542] clocksource: Switched to clocksource tsc
[    0.600636] Scanning for low memory corruption every 60 seconds
[    0.601073] Initialise system trusted keyrings
[    0.601081] Key type blacklist registered
[    0.601114] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.601998] zbud: loaded
[    0.603013] Key type asymmetric registered
[    0.603014] Asymmetric key parser 'x509' registered
[    0.603045] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.603073] io scheduler noop registered
[    0.603074] io scheduler deadline registered
[    0.603106] io scheduler cfq registered (default)
[    0.603107] io scheduler mq-deadline registered
[    0.603108] io scheduler kyber registered
[    0.603113] io scheduler bfq registered
[    0.604503] pcieport 0000:00:1c.0: AER enabled with IRQ 122
[    0.604527] pcieport 0000:00:1c.1: AER enabled with IRQ 123
[    0.604549] pcieport 0000:00:1d.0: AER enabled with IRQ 124
[    0.604571] pcieport 0000:00:1d.6: AER enabled with IRQ 125
[    0.604631] efifb: probing for efifb
[    0.604641] efifb: framebuffer at 0x80000000, using 8100k, total 8100k
[    0.604642] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    0.604642] efifb: scrolling: redraw
[    0.604644] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    0.608017] Console: switching to colour frame buffer device 240x67
[    0.611296] fb0: EFI VGA frame buffer device
[    0.611303] intel_idle: MWAIT substates: 0x11142120
[    0.611303] intel_idle: v0.4.1 model 0x9E
[    0.611567] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.611633] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.611647] ACPI: Lid Switch [LID0]
[    0.611679] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[    0.611690] ACPI: Power Button [PBTN]
[    0.611714] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.611720] ACPI: Sleep Button [SBTN]
[    0.611745] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.611754] ACPI: Power Button [PWRF]
[    0.614057] thermal LNXTHERM:00: registered as thermal_zone0
[    0.614058] ACPI: Thermal Zone [THM] (25 C)
[    0.614308] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.616008] nvme nvme0: pci function 0000:04:00.0
[    0.616059] intel_pstate: Intel P-state driver initializing
[    0.616104] intel_pstate: Disabling energy efficiency optimization
[    0.616478] intel_pstate: HWP enabled
[    0.616743] ledtrig-cpu: registered to indicate activity on CPUs
[    0.616762] resource sanity check: requesting [mem 0xfdffe800-0xfe0007ff], which spans more than pnp 00:07 [mem 0xfdb00000-0xfdffffff]
[    0.616765] caller pmc_core_probe+0x95/0x222 mapping multiple BARs
[    0.616770] intel_pmc_core:  initialized
[    0.616940] NET: Registered protocol family 10
[    0.620421] Segment Routing with IPv6
[    0.620436] NET: Registered protocol family 17
[    0.620916] RAS: Correctable Errors collector initialized.
[    0.620942] microcode: sig=0x906e9, pf=0x20, revision=0x7c
[    0.621213] microcode: Microcode Update Driver: v2.2.
[    0.621220] sched_clock: Marking stable (621209759, 0)->(604283087, 16926672)
[    0.621571] registered taskstats version 1
[    0.621576] Loading compiled-in X.509 certificates
[    0.621589] zswap: loaded using pool lzo/zbud
[    0.623887] Key type big_key registered
[    0.625585]   Magic number: 2:257:552
[    0.625593] aer 0000:00:1c.0:pcie002: hash matches
[    0.625595] clockevents clockevent3: hash matches
[    0.625612] acpi PNP0C0F:03: hash matches
[    0.625640] hctosys: unable to open rtc device (rtc0)
[    0.626895] Freeing unused kernel memory: 1464K
[    0.626895] Write protecting the kernel read-only data: 16384k
[    0.627309] Freeing unused kernel memory: 2016K
[    0.628503] Freeing unused kernel memory: 724K
[    0.704945] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.705582] i8042: Warning: Keylock active
[    0.708130] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.708173] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.714107] SCSI subsystem initialized
[    0.716573] ACPI: bus type USB registered
[    0.716592] usbcore: registered new interface driver usbfs
[    0.716600] usbcore: registered new interface driver hub
[    0.716632] usbcore: registered new device driver usb
[    0.718547] libata version 3.00 loaded.
[    0.721012] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.721019] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.722155] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.722161] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.722361] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.722363] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.722364] usb usb1: Product: xHCI Host Controller
[    0.722365] usb usb1: Manufacturer: Linux 4.16.6-1-ARCH xhci-hcd
[    0.722366] usb usb1: SerialNumber: 0000:00:14.0
[    0.722481] hub 1-0:1.0: USB hub found
[    0.722517] hub 1-0:1.0: 16 ports detected
[    0.722776] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.722905] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.722909] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.722957] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    0.722959] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.722960] usb usb2: Product: xHCI Host Controller
[    0.722962] usb usb2: Manufacturer: Linux 4.16.6-1-ARCH xhci-hcd
[    0.722964] usb usb2: SerialNumber: 0000:00:14.0
[    0.723069] hub 2-0:1.0: USB hub found
[    0.723089] hub 2-0:1.0: 8 ports detected
[    0.724428] ahci 0000:00:17.0: version 3.0
[    0.724665] ahci 0000:00:17.0: SSS flag set, parallel bus scan disabled
[    0.724689] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x2 impl SATA mode
[    0.724693] ahci 0000:00:17.0: flags: 64bit ncq sntf stag pm led clo only pio slum part ems deso sadm sds apst 
[    0.725072] scsi host0: ahci
[    0.725253] scsi host1: ahci
[    0.725295] ata1: DUMMY
[    0.725300] ata2: SATA max UDMA/133 abar m2048@0xedd33000 port 0xedd33180 irq 129
[    0.866778]  nvme0n1: p1 p2 p3 p4 p5 p6 p7 p9
[    1.038917] ata2: SATA link down (SStatus 4 SControl 300)
[    1.050079] usb 1-4: new full-speed USB device number 2 using xhci_hcd
[    1.092190] EXT4-fs (nvme0n1p5): mounted filesystem with ordered data mode. Opts: (null)
[    1.103067] random: fast init done
[    1.180140] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    1.190981] usb 1-4: New USB device found, idVendor=8087, idProduct=0a2b
[    1.190984] usb 1-4: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    1.197015] systemd[1]: Detected architecture x86-64.
[    1.201418] systemd[1]: Set hostname to <sawyer-xps-arch>.
[    1.268064] random: systemd: uninitialized urandom read (16 bytes read)
[    1.268134] systemd[1]: Listening on udev Control Socket.
[    1.268274] random: systemd: uninitialized urandom read (16 bytes read)
[    1.268307] systemd[1]: Listening on udev Kernel Socket.
[    1.268370] random: systemd: uninitialized urandom read (16 bytes read)
[    1.268419] systemd[1]: Listening on LVM2 poll daemon socket.
[    1.268484] random: systemd: uninitialized urandom read (16 bytes read)
[    1.268535] systemd[1]: Listening on Journal Socket (/dev/log).
[    1.268599] random: systemd: uninitialized urandom read (16 bytes read)
[    1.269679] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    1.269755] random: systemd: uninitialized urandom read (16 bytes read)
[    1.269798] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.269910] random: systemd: uninitialized urandom read (16 bytes read)
[    1.270090] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    1.270183] random: systemd: uninitialized urandom read (16 bytes read)
[    1.270290] random: systemd: uninitialized urandom read (16 bytes read)
[    1.270525] random: systemd: uninitialized urandom read (16 bytes read)
[    1.290549] acpi_call: loading out-of-tree module taints kernel.
[    1.309585] EXT4-fs (nvme0n1p5): re-mounted. Opts: data=ordered
[    1.313349] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    1.317225] vboxdrv: Found 8 processor cores
[    1.324773] systemd-journald[235]: Received request to flush runtime journal from PID 1
[    1.336940] vboxdrv: TSC mode is Invariant, tentative frequency 2807991095 Hz
[    1.336941] vboxdrv: Successfully loaded version 5.2.10 (interface 0x00290001)
[    1.342519] VBoxPciLinuxInit
[    1.342523] vboxpci: IOMMU not found (not registered)
[    1.343529] VBoxNetAdp: Successfully started.
[    1.345457] VBoxNetFlt: Successfully started.
[    1.417705] ACPI: AC Adapter [AC] (on-line)
[    1.419749] input: Intel HID events as /devices/platform/INT33D5:00/input/input6
[    1.419841] intel-hid INT33D5:00: platform supports 5 button array
[    1.419877] input: Intel HID 5 button array as /devices/platform/INT33D5:00/input/input7
[    1.428211] rtc_cmos 00:02: RTC can wake from S4
[    1.429063] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    1.429160] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    1.436439] ACPI Warning: \_SB.IETM._TRT: Return Package has no elements (empty) (20180105/nsprepkg-130)
[    1.438083] wmi_bus wmi_bus-PNP0C14:03: WQBC data block query control method not found
[    1.454411] usb 1-7: New USB device found, idVendor=138a, idProduct=0091
[    1.454414] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    1.454416] usb 1-7: SerialNumber: 11eda80034dc
[    1.521389] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.523535] intel-lpss 0000:00:15.0: enabling device (0000 -> 0002)
[    1.544065] ACPI: Battery Slot [BAT0] (battery present)
[    1.545118] input: PC Speaker as /devices/platform/pcspkr/input/input8
[    1.546915] hidraw: raw HID events driver (C) Jiri Kosina
[    1.561190] Adding 12641276k swap on /dev/nvme0n1p9.  Priority:-2 extents:1 across:12641276k SSFS
[    1.576720] usb 1-12: new high-speed USB device number 4 using xhci_hcd
[    1.587199] idma64 idma64.0: Found Intel integrated DMA 64-bit
[    1.591903] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    1.591905] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    1.591906] RAPL PMU: hw unit of domain package 2^-14 Joules
[    1.591906] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    1.591907] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    1.591908] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    1.599002] Linux agpgart interface v0.103
[    1.603435] tpm_tis MSFT0101:00: 2.0 TPM (device-id 0xFE, rev-id 4)
[    1.604532] cryptd: max_cpu_qlen set to 1000
[    1.614996] AVX2 version of gcm_enc/dec engaged.
[    1.614998] AES CTR mode by8 optimization enabled
[    1.651933] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    1.669741] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    1.674866] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    1.675761] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    1.675763] cfg80211: failed to load regulatory.db
[    1.675875] intel-lpss 0000:00:15.1: enabling device (0000 -> 0002)
[    1.676645] idma64 idma64.1: Found Intel integrated DMA 64-bit
[    1.680685] EXT4-fs (nvme0n1p6): mounted filesystem with ordered data mode. Opts: data=ordered
[    1.703728] i2c_hid i2c-DLL07BE:01: i2c-DLL07BE:01 supply vdd not found, using dummy regulator
[    1.728359] usb 1-12: New USB device found, idVendor=1bcf, idProduct=2b95
[    1.728362] usb 1-12: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.728364] usb 1-12: Product: Integrated_Webcam_HD
[    1.728365] usb 1-12: Manufacturer: CNFEH73N415400028F42
[    1.738325] Intel(R) Wireless WiFi driver for Linux
[    1.738327] Copyright(c) 2003- 2015 Intel Corporation
[    1.738432] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[    1.750310] iwlwifi 0000:02:00.0: loaded firmware version 36.e91976c0.0 op_mode iwlmvm
[    1.765630] random: crng init done
[    1.776655] intel_rapl: Found RAPL domain package
[    1.776657] intel_rapl: Found RAPL domain core
[    1.776658] intel_rapl: Found RAPL domain uncore
[    1.776659] intel_rapl: Found RAPL domain dram
[    1.786106] input: Dell WMI hotkeys as /devices/platform/PNP0C14:03/wmi_bus/wmi_bus-PNP0C14:03/9DBB5994-A997-11DA-B012-B622A1EF5492/input/input10
[    1.836125] media: Linux media interface: v0.10
[    1.880367] Linux video capture interface: v2.00
[    1.884229] Bluetooth: Core ver 2.22
[    1.884240] NET: Registered protocol family 31
[    1.884241] Bluetooth: HCI device and connection manager initialized
[    1.884244] Bluetooth: HCI socket layer initialized
[    1.884245] Bluetooth: L2CAP socket layer initialized
[    1.884249] Bluetooth: SCO socket layer initialized
[    1.887876] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 8265, REV=0x230
[    1.893023] usbcore: registered new interface driver btusb
[    1.893484] Bluetooth: hci0: Firmware revision 0.1 build 196 week 6 2018
[    1.899566] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (1bcf:2b95)
[    1.907127] uvcvideo 1-12:1.0: Entity type for entity Extension 4 was not initialized!
[    1.907130] uvcvideo 1-12:1.0: Entity type for entity Extension 3 was not initialized!
[    1.907131] uvcvideo 1-12:1.0: Entity type for entity Processing 2 was not initialized!
[    1.907133] uvcvideo 1-12:1.0: Entity type for entity Camera 1 was not initialized!
[    1.907194] input: Integrated_Webcam_HD: Integrate as /devices/pci0000:00/0000:00:14.0/usb1/1-12/1-12:1.0/input/input11
[    1.907252] usbcore: registered new interface driver uvcvideo
[    1.907252] USB Video Class driver (1.1.1)
[    2.109588] proc_thermal 0000:00:04.0: enabling device (0000 -> 0002)
[    2.113671] iwlwifi 0000:02:00.0: base HW address: f8:59:71:13:4c:2d
[    2.113810] input: DLL07BE:01 06CB:7A13 as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input12
[    2.113898] hid-generic 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL07BE:01 06CB:7A13] on i2c-DLL07BE:01
[    2.115471] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    2.115513] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    2.142813] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    2.145142] iTCO_vendor_support: vendor-support=0
[    2.146033] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    2.146177] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    2.146289] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    2.154952] input: DLL07BE:01 06CB:7A13 Touchpad as /devices/pci0000:00/0000:00:15.1/i2c_designware.1/i2c-1/i2c-DLL07BE:01/0018:06CB:7A13.0001/input/input14
[    2.155062] hid-multitouch 0018:06CB:7A13.0001: input,hidraw0: I2C HID v1.00 Mouse [DLL07BE:01 06CB:7A13] on i2c-DLL07BE:01
[    2.158313] snd_hda_intel 0000:00:1f.3: enabling device (0000 -> 0002)
[    2.158739] mousedev: PS/2 mouse device common for all mice
[    2.160107] checking generic (80000000 7e9000) vs hw (80000000 10000000)
[    2.160108] fb: switching to inteldrmfb from EFI VGA
[    2.161071] Console: switching to colour dummy device 80x25
[    2.161161] [drm] Replacing VGA console driver
[    2.162222] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    2.162224] [drm] Driver supports precise vblank timestamp query.
[    2.163618] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    2.164203] [drm] Finished loading DMC firmware i915/kbl_dmc_ver1_04.bin (v1.4)
[    2.172658] 8021q: 802.1Q VLAN Support v1.8
[    2.173790] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[    2.175367] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    2.176369] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input19
[    2.176451] ACPI: Video Device [PEGP] (multi-head: no  rom: yes  post: no)
[    2.176485] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0a/LNXVIDEO:01/input/input20
[    2.176632] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    2.177250] bbswitch: version 0.8
[    2.177254] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    2.177260] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    2.177269] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20180105/nsarguments-100)
[    2.177402] bbswitch: detected an Optimus _DSM function
[    2.177407] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[    2.185728] fbcon: inteldrmfb (fb0) is primary device
[    2.189341] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    2.189637] thermal thermal_zone11: failed to read out thermal zone (-61)
[    2.191191] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    2.220683] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    2.220683] Bluetooth: BNEP filters: protocol multicast
[    2.220686] Bluetooth: BNEP socket layer initialized
[    2.267877] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC3266: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[    2.267879] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.267881] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
[    2.267882] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.267882] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.267884] snd_hda_codec_realtek hdaudioC0D0:      Headset Mic=0x18
[    2.267885] snd_hda_codec_realtek hdaudioC0D0:      Headphone Mic=0x1a
[    2.267886] snd_hda_codec_realtek hdaudioC0D0:      Internal Mic=0x12
[    2.328570] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input21
[    2.328681] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input22
[    2.328767] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input23
[    2.328855] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input24
[    2.328981] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input25
[    2.329120] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:1f.3/sound/card0/input26
[    2.444737] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    3.291846] Console: switching to colour frame buffer device 240x67
[    3.314266] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    3.646061] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    3.876963] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    3.997425] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    5.495772] Bluetooth: RFCOMM TTY layer initialized
[    5.495780] Bluetooth: RFCOMM socket layer initialized
[    5.495787] Bluetooth: RFCOMM ver 1.11
[    9.851449] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   11.396578] fuse init (API version 7.26)
[   14.103352] psmouse serio1: Failed to deactivate mouse on isa0060/serio1
[   14.583352] psmouse serio1: Failed to enable mouse on isa0060/serio1
[   18.866847] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input9
[   19.070010] psmouse serio1: Failed to enable mouse on isa0060/serio1
[   40.005599] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   40.012093] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   40.801765] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   43.555871] wlp2s0: authenticate with d8:b6:b7:9a:4d:a4
[   43.566003] wlp2s0: send auth to d8:b6:b7:9a:4d:a4 (try 1/3)
[   43.572467] wlp2s0: authenticated
[   43.573376] wlp2s0: associate with d8:b6:b7:9a:4d:a4 (try 1/3)
[   43.577181] wlp2s0: RX AssocResp from d8:b6:b7:9a:4d:a4 (capab=0x411 status=0 aid=5)
[   43.580088] wlp2s0: associated
[   43.628170] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[   79.201141] wlp2s0: deauthenticating from d8:b6:b7:9a:4d:a4 by local choice (Reason: 3=DEAUTH_LEAVING)
[   79.234181] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   79.646154] PM: suspend entry (deep)
[   79.646155] PM: Syncing filesystems ... done.
[   79.656162] bbswitch: enabling discrete graphics
[   79.656181] pci 0000:01:00.0: Refused to change power state, currently in D3
[   79.656187] pci 0000:01:00.0: Refused to change power state, currently in D3
[   79.656269] Freezing user space processes ... (elapsed 0.001 seconds) done.
[   79.658050] OOM killer disabled.
[   79.658050] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[   79.659203] Suspending console(s) (use no_console_suspend to debug)
[   79.863418] psmouse serio1: Failed to disable mouse on isa0060/serio1
[   80.864003] ACPI: EC: interrupt blocked
[   80.897114] ACPI: Preparing to enter system sleep state S3
[   80.902359] ACPI: EC: event blocked
[   80.902360] ACPI: EC: EC stopped
[   80.902360] PM: Saving platform NVS memory
[   80.902432] Disabling non-boot CPUs ...
[   80.948230] smpboot: CPU 1 is now offline
[   81.001553] smpboot: CPU 2 is now offline
[   81.055306] smpboot: CPU 3 is now offline
[   81.081965] smpboot: CPU 4 is now offline
[   81.121436] smpboot: CPU 5 is now offline
[   81.161466] smpboot: CPU 6 is now offline
[   81.211463] smpboot: CPU 7 is now offline
[   81.215208] ACPI: Low-level resume complete
[   81.215335] ACPI: EC: EC started
[   81.215335] PM: Restoring platform NVS memory
[   81.216183] Enabling non-boot CPUs ...
[   81.216213] x86: Booting SMP configuration:
[   81.216214] smpboot: Booting Node 0 Processor 1 APIC 0x2
[   81.216648]  cache: parent cpu1 should not be sleeping
[   81.216685] intel_pstate: Disabling energy efficiency optimization
[   81.216847] CPU1 is up
[   81.216865] smpboot: Booting Node 0 Processor 2 APIC 0x4
[   81.217278]  cache: parent cpu2 should not be sleeping
[   81.217463] CPU2 is up
[   81.217480] smpboot: Booting Node 0 Processor 3 APIC 0x6
[   81.217893]  cache: parent cpu3 should not be sleeping
[   81.218091] CPU3 is up
[   81.218107] smpboot: Booting Node 0 Processor 4 APIC 0x1
[   81.218592]  cache: parent cpu4 should not be sleeping
[   81.218815] CPU4 is up
[   81.218834] smpboot: Booting Node 0 Processor 5 APIC 0x3
[   81.219241]  cache: parent cpu5 should not be sleeping
[   81.219455] CPU5 is up
[   81.219474] smpboot: Booting Node 0 Processor 6 APIC 0x5
[   81.219887]  cache: parent cpu6 should not be sleeping
[   81.220118] CPU6 is up
[   81.220134] smpboot: Booting Node 0 Processor 7 APIC 0x7
[   81.220556]  cache: parent cpu7 should not be sleeping
[   81.220788] CPU7 is up
[   81.227148] ACPI: Waking up from system sleep state S3
[   81.359325] ACPI: EC: interrupt unblocked
[   81.384219] pci 0000:01:00.0: Refused to change power state, currently in D3
[   81.392106] ACPI: EC: event unblocked
[   81.392456] pci 0000:01:00.0: Refused to change power state, currently in D3
[   81.392519] usb usb1: root hub lost power or was reset
[   81.392522] usb usb2: root hub lost power or was reset
[   81.707513] ata2: SATA link down (SStatus 4 SControl 300)
[   81.740050] usb 1-7: reset full-speed USB device number 3 using xhci_hcd
[   81.831799] ACPI: button: The lid device is not compliant to SW_LID.
[   82.003473] usb 1-12: reset high-speed USB device number 4 using xhci_hcd
[   82.266826] usb 1-4: reset full-speed USB device number 2 using xhci_hcd
[   82.410132] acpi LNXPOWER:16: Turning OFF
[   82.410303] acpi LNXPOWER:15: Turning OFF
[   82.410467] acpi LNXPOWER:14: Turning OFF
[   82.410629] acpi LNXPOWER:13: Turning OFF
[   82.410791] acpi LNXPOWER:12: Turning OFF
[   82.410954] acpi LNXPOWER:11: Turning OFF
[   82.411116] acpi LNXPOWER:10: Turning OFF
[   82.411279] acpi LNXPOWER:0f: Turning OFF
[   82.411436] acpi LNXPOWER:0e: Turning OFF
[   82.411598] acpi LNXPOWER:0d: Turning OFF
[   82.411760] acpi LNXPOWER:0c: Turning OFF
[   82.411921] acpi LNXPOWER:0b: Turning OFF
[   82.412082] acpi LNXPOWER:0a: Turning OFF
[   82.412242] acpi LNXPOWER:09: Turning OFF
[   82.412406] acpi LNXPOWER:08: Turning OFF
[   82.412568] acpi LNXPOWER:07: Turning OFF
[   82.412730] acpi LNXPOWER:06: Turning OFF
[   82.412885] acpi LNXPOWER:05: Turning OFF
[   82.413046] acpi LNXPOWER:04: Turning OFF
[   82.413206] acpi LNXPOWER:03: Turning OFF
[   82.413360] OOM killer enabled.
[   82.413361] Restarting tasks ... done.
[   82.420086] Bluetooth: hci0: Bootloader revision 0.0 build 26 week 38 2015
[   82.421014] Bluetooth: hci0: Device revision is 16
[   82.421016] Bluetooth: hci0: Secure boot is enabled
[   82.421017] Bluetooth: hci0: OTP lock is enabled
[   82.421018] Bluetooth: hci0: API lock is enabled
[   82.421019] Bluetooth: hci0: Debug lock is disabled
[   82.421021] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
[   82.422433] Bluetooth: hci0: Found device firmware: intel/ibt-12-16.sfi
[   82.444407] thermal thermal_zone11: failed to read out thermal zone (-61)
[   82.526105] PM: suspend exit
[   82.532598] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   82.747421] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   82.822134] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[   84.156612] Bluetooth: hci0: Waiting for firmware download to complete
[   84.157025] Bluetooth: hci0: Firmware loaded in 1697061 usecs
[   84.157186] Bluetooth: hci0: Waiting for device to boot
[   84.169033] Bluetooth: hci0: Device booted in 11686 usecs
[   84.176724] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-12-16.ddc
[   84.180018] Bluetooth: hci0: Applying Intel DDC parameters completed
[   86.233996] wlp2s0: authenticate with d8:b6:b7:9a:4d:a4
[   86.242449] wlp2s0: send auth to d8:b6:b7:9a:4d:a4 (try 1/3)
[   86.249625] wlp2s0: authenticated
[   86.253339] wlp2s0: associate with d8:b6:b7:9a:4d:a4 (try 1/3)
[   86.257126] wlp2s0: RX AssocResp from d8:b6:b7:9a:4d:a4 (capab=0x411 status=0 aid=5)
[   86.260140] wlp2s0: associated
[   86.320233] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready

Offline

#330 2018-05-14 07:56:37

pmatos
Member
Registered: 2017-09-03
Posts: 14

Re: Dell XPS 15 9560 (Early 2017)

I have gotten arch on my XPS 15 9560 and I added the following flags `enable_fbc=1 enable_psr=1 disable_power_well=0` on i915 driver as described here: https://wiki.archlinux.org/index.php/De … nel_module

However I do see the mentioned flickering every few minutes. What's the set of flags you guys use that doesn't cause the flickering?

Thanks,

Paulo

Offline

Board footer

Powered by FluxBB