[Solved]: DP/HDMI detected -- no video output

Chino · 2018-05-19 07:08:14

Good Morning holy forum! I've been using Arch now for about two years. So far no bigger problems or at least self-solvable by researching the forums. Now that I got a "new" notebook (refurbished elitebook 8470p) I'm facing the first problem I'm not able to fix by myselft, so I'd appreciate your advises.

For 3 days I'm trying to get my external Monitor running through DP-HDMI adapter. (Note: already using a second adapter to avoid crappy hardware) The monitor ist recognised by both xfce4-display-settings and arandr. But no matter what I try, the monitor shows "no input". Installing catalyst didn't solve the Problem. What confuses me even more: There should be both an onboard Intel graphics and a ATI card, which isn't shown either.
Oh, and worth mentioning: VGA output works instantly...
I'm running 4.16.8-1-zen kernel.

lspci:

00:00.0 Host bridge: Intel Corporation 3rd Gen Core processor DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C216 Chipset Family MEI Controller #1 (rev 04)
00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
00:1c.3 PCI bridge: Intel Corporation 7 Series/C216 Chipset Family PCI Express Root Port 4 (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C216 Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
23:00.0 FireWire (IEEE 1394): JMicron Technology Corp. IEEE 1394 Host Controller (rev 30)
23:00.1 System peripheral: JMicron Technology Corp. SD/MMC Host Controller (rev 30)
23:00.2 SD Host controller: JMicron Technology Corp. Standard SD Host Controller (rev 30)
24:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)

xrandr --prop:

Screen 0: minimum 8 x 8, current 3752 x 1080, maximum 32767 x 32767
LVDS1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 310mm x 170mm
	EDID: 
		00ffffffffffff0030e4060300000000
		00140104901f11780243459759578e28
		21505400000001010101010101010101
		010101010101582f402e62842430a060
		350036ae10000019901f402e62842430
		a060350036ae10000019000000000000
		00000000000000000000000000000002
		000a3aff0a3c7d191b337d0000000046
	BACKLIGHT: 3487 
		range: (0, 3487)
	Backlight: 3487 
		range: (0, 3487)
	scaling mode: Full aspect 
		supported: Full, Center, Full aspect
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
   1600x900      60.00*+  59.95    59.82    40.00  
   1400x900      59.96    59.88  
   1368x768      60.00    59.88    59.85  
   1280x800      59.81    59.91  
   1280x720      59.86    60.00    59.74  
   1024x768      60.00  
   1024x576      60.00    59.90    59.82  
   960x540       60.00    59.63    59.82  
   800x600       60.32    56.25  
   864x486       60.00    59.92    59.57  
   800x450       60.00  
   640x480       59.94  
   720x405       59.51    60.00    58.99  
   640x360       59.84    59.32    60.00  
DP1 disconnected (normal left inverted right x axis y axis)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
DP2 disconnected (normal left inverted right x axis y axis)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
DP3 disconnected (normal left inverted right x axis y axis)
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
HDMI1 disconnected (normal left inverted right x axis y axis)
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
HDMI2 disconnected (normal left inverted right x axis y axis)
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
HDMI3 connected 1920x1080+1832+0 (normal left inverted right x axis y axis) 510mm x 290mm
	EDID: 
		00ffffffffffff004c2d6f0735433242
		0a15010380331d782aee91a3544c9926
		0f5054bfef80714f8100814081809500
		950fa940b300023a801871382d40582c
		4500fd1e1100001e011d007251d01e20
		6e285500fd1e1100001e000000fd0032
		4b1f5111000a202020202020000000fc
		00534d4258323333310a2020202001ec
		02031cf14890041f0514131203230907
		078301000066030c00100080011d80d0
		721c1620102c2580fd1e1100009e011d
		8018711c1620582c2500fd1e1100009e
		011d00bc52d01e20b8285540fd1e1100
		001e8c0ad090204031200c405500fd1e
		110000188c0ad08a20e02d10103e9600
		fd1e110000180000000000000000004c
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
   1920x1080     60.00*+  50.00    59.94  
   1920x1080i    60.00    50.00    59.94  
   1600x1200     60.00  
   1680x1050     59.88  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.90  
   1280x960      60.00  
   1280x800      59.91  
   1152x864      75.00  
   1280x720      60.00    50.00    59.94  
   1024x768      75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    72.81    66.67    60.00    59.94  
   720x400       70.08  
VGA1 disconnected (normal left inverted right x axis y axis)
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
	non-desktop: 0 
		supported: 0, 1

Really appreciate your help!

Last edited by Chino (2018-06-05 13:09:39)

ewaller · 2018-05-19 14:59:17

Not sure I can help as I don't have your hardware. Having read your post, you might want to tell us which driver you are using for Intel. Also, I do note that you have something on the HDMI port.
What xrandr commands have you issued to try to get this to work?
I suggest you get this working first with xrandr, then worry about trying to get it to work using DE GUI tools.

IrvineHimself · 2018-05-19 16:09:52

I must agree with ewaller. As I pointed out in this post, since the last update of the xf86-video-intel/xorg-server I have been having problems with xrandr crashing when I try to mirror my display with:

xrandr --output eDP-1 --auto --primary --output HDMI-1 --auto --same-as eDP-1

I don't want to annoy ewaller by branching discussions, but, also as I pointed out in the linked post, for me, a temporary fix was to use my cache to regress xf86-video-intel and xorg-server to the last known working release with:

sudo pacman -U /var/cache/pacman/pkg/xf86-video-intel-1:2.99.917+829+gd7dfab62-1-x86_64.pkg.tar.xz /var/cache/pacman/pkg/xorg-server-1.19.6+13+gd0d1a694f-2-x86_64.pkg.tar.xz

Hope this helps,
Irvine

Chino · 2018-05-20 15:38:41

Thanks so far. Actually, a friend told me this morning, that there are different types of Displayports, which means that in my particular case, an active adaptor has to be used, which I didn't know. Ordered one, guess will fix it all. After testing, I'll post my results.

Chino · 2018-05-29 15:04:14

OK, so obviously the adaptor was not main problem. So the external Monitor is still detected but it gets no signal at all. I tried xf86-video-ati and xf86-video-amdgpu driver, both with no output. For the intel graphics it's xf86-video-intel
I also tried the output on a live system using a different kernel, same result (which is none) there. The advise given by IrvineHimself didn't change a thing for me.

Actually, I found a plethora of documentation about different strategies to figure it out, but I'm quite confused where to start. So I really need you guys to guide me here a bit.

xrandr output:

Screen 0: minimum 8 x 8, current 1600 x 900, maximum 32767 x 32767
LVDS1 connected primary 1600x900+0+0 (normal left inverted right x axis y axis) 310mm x 170mm
   1600x900      60.00*+  59.95    59.82    40.00  
   1400x900      59.96    59.88  
   1368x768      60.00    59.88    59.85  
   1280x800      59.81    59.91  
   1280x720      59.86    60.00    59.74  
   1024x768      60.00  
   1024x576      60.00    59.90    59.82  
   960x540       60.00    59.63    59.82  
   800x600       60.32    56.25  
   864x486       60.00    59.92    59.57  
   800x450       60.00  
   640x480       59.94  
   720x405       59.51    60.00    58.99  
   640x360       59.84    59.32    60.00  
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 connected (normal left inverted right x axis y axis)
   1920x1080i    60.00    50.00    59.94  
   1680x1050     59.88  
   1280x1024     75.02    60.02  
   1440x900      74.98    59.90  
   1280x960      60.00  
   1280x800      59.91  
   1152x864      75.00  
   1280x720      60.00    50.00    59.94  
   1024x768      75.03    70.07    60.00  
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    72.81    66.67    60.00    59.94  
   720x400       70.08

I tried setting different resolution (although my monitor might be able to display HD), but again without output.
Again, what confused me the most is the fact, that the vga output perfectly worked out of the box without any configuration.

Thanks in advance

Edit: Different cable and different Monitor with no improvement.

Last edited by Chino (2018-05-31 07:55:35)

Chino · 2018-05-31 08:48:23

Nobody any hint where to start?

IrvineHimself · 2018-05-31 09:16:12

We already gave you a hint: Try it with xrandr alone and post the output

Chino · 2018-05-31 11:03:05

I'm sorry, if I misunderstood something.

xrandr:

Screen 0: minimum 8 x 8, current 2624 x 900, maximum 32767 x 32767
LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 310mm x 170mm
   1600x900      60.00*+  59.95    59.82    40.00  
   1400x900      59.96    59.88  
   1368x768      60.00    59.88    59.85  
   1280x800      59.81    59.91  
   1280x720      59.86    60.00    59.74  
   1024x768      60.00  
   1024x576      60.00    59.90    59.82  
   960x540       60.00    59.63    59.82  
   800x600       60.32    56.25  
   864x486       60.00    59.92    59.57  
   800x450       60.00  
   640x480       59.94  
   720x405       59.51    60.00    58.99  
   640x360       59.84    59.32    60.00  
DP1 disconnected (normal left inverted right x axis y axis)
DP2 disconnected (normal left inverted right x axis y axis)
DP3 connected 1280x800+1600+0 (normal left inverted right x axis y axis) 510mm x 290mm
   1280x800      59.91  
   1024x768      60.00* 
   832x624       74.55  
   800x600       72.19    75.00    60.32    56.25  
   720x576       50.00  
   720x480       60.00    59.94  
   640x480       75.00    72.81    66.67    60.00    59.94  
   720x400       70.08  
HDMI1 disconnected (normal left inverted right x axis y axis)
HDMI2 disconnected (normal left inverted right x axis y axis)
HDMI3 disconnected (normal left inverted right x axis y axis)
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)

No error output after:

xrandr --output DP3 --auto
xrandr --output DP3 --right-of LVDS1

Still no Signal to the Monitor...

Last edited by Chino (2018-05-31 11:04:23)

V1del · 2018-05-31 11:17:37

Do you see any reaction/can you post a dmesg and/or the xorg log to your change attempts? What's the output of

xrandr --listproviders

? FWIW can you try without any xf86-video package? That should make both relevant parties use the general purpose modesetting driver, which might already be enough to make this workable.

Chino · 2018-05-31 11:32:33

I see reaction only on the notebook display. The monitor switsches from "check Signal cable" to " waiting for something". Without xf86-video-intel I get a black screen after boot, so I reinstalled it.

dmesg
[    0.000000] Linux version 4.16.12-1-zen (builduser@heftig-1239) (gcc version 8.1.0 (GCC)) #1 ZEN SMP PREEMPT Fri May 25 23:30:20 UTC 2018
[    0.000000] Command line: initrd=\initramfs-linux-zen.img root=PARTUUID=d40e15ac-687b-451c-a564-cd864c93afd7 rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b88fefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b88ff000-0x00000000b9c7efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000b9c7f000-0x00000000b9dfefff] usable
[    0.000000] BIOS-e820: [mem 0x00000000b9dff000-0x00000000b9f7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000b9f7f000-0x00000000b9ffefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffee0000-0x00000000ffefefff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023edfffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] e820: update [mem 0xb9cea018-0xb9cfa057] usable ==> usable
[    0.000000] e820: update [mem 0xb9cea018-0xb9cfa057] usable ==> usable
[    0.000000] e820: update [mem 0xb9ce1018-0xb9ce9e57] usable ==> usable
[    0.000000] e820: update [mem 0xb9ce1018-0xb9ce9e57] usable ==> usable
[    0.000000] extended physical RAM map:
[    0.000000] reserve setup_data: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] reserve setup_data: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000b88fefff] usable
[    0.000000] reserve setup_data: [mem 0x00000000b88ff000-0x00000000b9c7efff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000b9c7f000-0x00000000b9ce1017] usable
[    0.000000] reserve setup_data: [mem 0x00000000b9ce1018-0x00000000b9ce9e57] usable
[    0.000000] reserve setup_data: [mem 0x00000000b9ce9e58-0x00000000b9cea017] usable
[    0.000000] reserve setup_data: [mem 0x00000000b9cea018-0x00000000b9cfa057] usable
[    0.000000] reserve setup_data: [mem 0x00000000b9cfa058-0x00000000b9dfefff] usable
[    0.000000] reserve setup_data: [mem 0x00000000b9dff000-0x00000000b9f7efff] ACPI NVS
[    0.000000] reserve setup_data: [mem 0x00000000b9f7f000-0x00000000b9ffefff] ACPI data
[    0.000000] reserve setup_data: [mem 0x00000000b9fff000-0x00000000b9ffffff] usable
[    0.000000] reserve setup_data: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] reserve setup_data: [mem 0x00000000ffee0000-0x00000000ffefefff] reserved
[    0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000023edfffff] usable
[    0.000000] efi: EFI v2.10 by HPQ
[    0.000000] efi:  ACPI=0xb9ffe000  ACPI 2.0=0xb9ffe014  SMBIOS=0xb92ae718 
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: Hewlett-Packard HP EliteBook 8470p/179B, BIOS 68ICF Ver. F.45 10/07/2013
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x23ee00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0FF800000 mask FFF800000 write-protect
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   4 base 0BB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask F00000000 write-back
[    0.000000]   6 base 200000000 mask FC0000000 write-back
[    0.000000]   7 base 23F000000 mask FFF000000 uncachable
[    0.000000]   8 base 23EE00000 mask FFFE00000 uncachable
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000000] e820: last_pfn = 0xba000 max_arch_pfn = 0x400000000
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [        (ptrval)] 97000 size 24576
[    0.000000] BRK [0x1d6878000, 0x1d6878fff] PGTABLE
[    0.000000] BRK [0x1d6879000, 0x1d6879fff] PGTABLE
[    0.000000] BRK [0x1d687a000, 0x1d687afff] PGTABLE
[    0.000000] BRK [0x1d687b000, 0x1d687bfff] PGTABLE
[    0.000000] BRK [0x1d687c000, 0x1d687cfff] PGTABLE
[    0.000000] BRK [0x1d687d000, 0x1d687dfff] PGTABLE
[    0.000000] BRK [0x1d687e000, 0x1d687efff] PGTABLE
[    0.000000] BRK [0x1d687f000, 0x1d687ffff] PGTABLE
[    0.000000] BRK [0x1d6880000, 0x1d6880fff] PGTABLE
[    0.000000] BRK [0x1d6881000, 0x1d6881fff] PGTABLE
[    0.000000] Secure boot disabled
[    0.000000] RAMDISK: [mem 0x7f877000-0x7fffefff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000B9FFE014 000024 (v02 HPQOEM)
[    0.000000] ACPI: XSDT 0x00000000B9FFE120 00008C (v01 HPQOEM SLIC-MPC 0000000F      01000013)
[    0.000000] ACPI: FACP 0x00000000B9FFC000 00010C (v05 HPQOEM 179B     0000000F HP   00000001)
[    0.000000] ACPI: DSDT 0x00000000B9FD3000 0232B6 (v02 HPQOEM 179B     00000001 INTL 20110112)
[    0.000000] ACPI: FACS 0x00000000B9C34000 000040
[    0.000000] ACPI: FACS 0x00000000B9C34000 000040
[    0.000000] ACPI: HPET 0x00000000B9FFB000 000038 (v01 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: APIC 0x00000000B9FFA000 0000BC (v01 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: MCFG 0x00000000B9FF9000 00003C (v01 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: TCPA 0x00000000B9FF7000 000032 (v02 HPQOEM 179B     00000000 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000B9FD0000 0002CA (v01 HPQOEM SataAhci 00001000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x00000000B9FCF000 00048A (v01 HPQOEM PtidDevc 00001000 INTL 20110112)
[    0.000000] ACPI: SLIC 0x00000000B9FCE000 000176 (v01 HPQOEM SLIC-MPC 00000001 HP   00000001)
[    0.000000] ACPI: FPDT 0x00000000B9FCC000 000044 (v01 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: BGRT 0x00000000B9FCB000 000038 (v00 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: SSDT 0x00000000B9FCA000 0009B6 (v01 PmRef  Cpu0Ist  00003000 INTL 20110112)
[    0.000000] ACPI: SSDT 0x00000000B9FC9000 000AAD (v01 PmRef  CpuPm    00003000 INTL 20110112)
[    0.000000] ACPI: ASF! 0x00000000B9FF8000 0000A5 (v32 HPQOEM 179B     00000001 HP   00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023edfffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23edf8000-0x23edfbfff]
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023edfffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000b88fefff]
[    0.000000]   node   0: [mem 0x00000000b9c7f000-0x00000000b9dfefff]
[    0.000000]   node   0: [mem 0x00000000b9fff000-0x00000000b9ffffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023edfffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023edfffff]
[    0.000000] On node 0 totalpages: 2062364
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 22 pages reserved
[    0.000000]   DMA zone: 3996 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11754 pages used for memmap
[    0.000000]   DMA32 zone: 752256 pages, LIFO batch:31
[    0.000000]   Normal zone: 20408 pages used for memmap
[    0.000000]   Normal zone: 1306112 pages, LIFO batch:31
[    0.000000] Reserved but unavailable: 98 pages
[    0.000000] Reserving Intel graphics memory at [mem 0xbb200000-0xbf1fffff]
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xb88ff000-0xb9c7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9ce1000-0xb9ce1fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9ce9000-0xb9ce9fff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9cea000-0xb9ceafff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9cfa000-0xb9cfafff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9dff000-0xb9f7efff]
[    0.000000] PM: Registered nosave memory: [mem 0xb9f7f000-0xb9ffefff]
[    0.000000] PM: Registered nosave memory: [mem 0xba000000-0xbb1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbb200000-0xbf1fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbf200000-0xe00f7fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[    0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed1bfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffedffff]
[    0.000000] PM: Registered nosave memory: [mem 0xffee0000-0xffefefff]
[    0.000000] PM: Registered nosave memory: [mem 0xffeff000-0xffffffff]
[    0.000000] e820: [mem 0xbf200000-0xe00f7fff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] random: get_random_bytes called from start_kernel+0x93/0x4d6 with crng_init=0
[    0.000000] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.000000] percpu: Embedded 46 pages/cpu @        (ptrval) s151552 r8192 d28672 u262144
[    0.000000] pcpu-alloc: s151552 r8192 d28672 u262144 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2030116
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: initrd=\initramfs-linux-zen.img root=PARTUUID=d40e15ac-687b-451c-a564-cd864c93afd7 rw
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 7930312K/8249456K available (12300K kernel code, 1275K rwdata, 3404K rodata, 1448K init, 640K bss, 319144K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] Kernel/User page tables isolation: enabled
[    0.000000] ftrace: allocating 29791 entries in 117 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	CONFIG_RCU_FANOUT set to non-default value of 32
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.000000] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 20736, nr_irqs: 488, preallocated irqs: 16
[    0.000000] 	Offload RCU callbacks from CPUs: .
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] ACPI: Core revision 20180105
[    0.000000] ACPI: 5 ACPI AML tables successfully acquired and loaded
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.000000] hpet clockevent registered
[    0.000000] APIC: Switch to symmetric I/O mode setup
[    0.000000] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.000000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.016666] tsc: Fast TSC calibration using PIT
[    0.019999] tsc: Detected 2693.994 MHz processor
[    0.019999] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d5148aa9e, max_idle_ns: 440795212157 ns
[    0.019999] Calibrating delay loop (skipped), value calculated using timer frequency.. 5390.48 BogoMIPS (lpj=8979980)
[    0.019999] pid_max: default: 32768 minimum: 301
[    0.032708] Security Framework initialized
[    0.032709] Yama: becoming mindful.
[    0.033899] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.034518] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.034549] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034569] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.034765] CPU: Physical Processor ID: 0
[    0.034766] CPU: Processor Core ID: 0
[    0.034771] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.034771] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.034775] mce: CPU supports 7 MCE banks
[    0.034782] CPU0: Thermal monitoring enabled (TM1)
[    0.034791] process: using mwait in idle threads
[    0.034793] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
[    0.034794] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.034795] Spectre V2 : Mitigation: Full generic retpoline
[    0.034796] Speculative Store Bypass: Vulnerable
[    0.034896] Freeing SMP alternatives memory: 32K
[    0.040200] TSC deadline timer enabled
[    0.040203] smpboot: CPU0: Intel(R) Core(TM) i5-3340M CPU @ 2.70GHz (family: 0x6, model: 0x3a, stepping: 0x9)
[    0.053349] Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.053391] ... version:                3
[    0.053392] ... bit width:              48
[    0.053393] ... generic registers:      4
[    0.053408] ... value mask:             0000ffffffffffff
[    0.053409] ... max period:             00007fffffffffff
[    0.053409] ... fixed-purpose events:   3
[    0.053410] ... event mask:             000000070000000f
[    0.060006] Hierarchical SRCU implementation.
[    0.080240] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.086672] smp: Bringing up secondary CPUs ...
[    0.116691] x86: Booting SMP configuration:
[    0.116693] .... node  #0, CPUs:      #1 #2 #3
[    0.179224] smp: Brought up 1 node, 4 CPUs
[    0.179224] smpboot: Max logical packages: 2
[    0.179224] smpboot: Total of 4 processors activated (21560.95 BogoMIPS)
[    0.180261] devtmpfs: initialized
[    0.180261] x86/mm: Memory block size: 128MB
[    0.180593] PM: Registering ACPI NVS region [mem 0xb9dff000-0xb9f7efff] (1572864 bytes)
[    0.180593] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.180593] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.180593] pinctrl core: initialized pinctrl subsystem
[    0.180593] RTC time: 11:22:56, date: 05/31/18
[    0.180593] NET: Registered protocol family 16
[    0.180593] cpuidle: using governor ladder
[    0.183362] cpuidle: using governor menu
[    0.183416] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.183418] ACPI: bus type PCI registered
[    0.183419] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.183488] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.183499] PCI: not using MMCONFIG
[    0.183499] PCI: Using configuration type 1 for base access
[    0.183499] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
[    0.184103] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.184103] ACPI: Added _OSI(Module Device)
[    0.184103] ACPI: Added _OSI(Processor Device)
[    0.184103] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.184103] ACPI: Added _OSI(Processor Aggregator Device)
[    0.184103] ACPI: Executed 1 blocks of module-level executable AML code
[    0.195834] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.213306] ACPI: Dynamic OEM Table Load:
[    0.213314] ACPI: SSDT 0xFFFF9C1834D12000 000861 (v01 PmRef  Cpu0Cst  00003001 INTL 20110112)
[    0.213817] ACPI: Dynamic OEM Table Load:
[    0.213822] ACPI: SSDT 0xFFFF9C1834F38C00 000303 (v01 PmRef  ApIst    00003000 INTL 20110112)
[    0.214189] ACPI: Dynamic OEM Table Load:
[    0.214193] ACPI: SSDT 0xFFFF9C1834F2F200 000119 (v01 PmRef  ApCst    00003000 INTL 20110112)
[    0.215368] ACPI: EC: EC started
[    0.215368] ACPI: EC: interrupt blocked
[    0.651815] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[    0.651817] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.651819] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[    0.651819] ACPI: Interpreter enabled
[    0.651840] ACPI: (supports S0 S3 S4 S5)
[    0.651841] ACPI: Using IOAPIC for interrupt routing
[    0.651865] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.652308] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.652322] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.652644] ACPI: Enabled 8 GPEs in block 00 to 3F
[    0.655408] ACPI: Power Resource [APPR] (off)
[    0.658273] ACPI: Power Resource [COMP] (off)
[    0.658981] ACPI: Power Resource [LPP] (on)
[    0.663470] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.663476] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.665978] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[    0.665980] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.666628] PCI host bridge to bus 0000:00
[    0.666631] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.666632] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.666634] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.666635] pci_bus 0000:00: root bus resource [mem 0xbf200000-0xdfffffff window]
[    0.666636] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfedfffff window]
[    0.666637] pci_bus 0000:00: root bus resource [mem 0xfee01000-0xffffffff window]
[    0.666639] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.666647] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[    0.666749] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[    0.666760] pci 0000:00:02.0: reg 0x10: [mem 0xd4000000-0xd43fffff 64bit]
[    0.666766] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.666771] pci 0000:00:02.0: reg 0x20: [io  0x4000-0x403f]
[    0.666787] pci 0000:00:02.0: BAR 2: assigned to efifb
[    0.666906] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[    0.666928] pci 0000:00:14.0: reg 0x10: [mem 0xd4720000-0xd472ffff 64bit]
[    0.666997] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.667075] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[    0.667101] pci 0000:00:16.0: reg 0x10: [mem 0xd4734000-0xd473400f 64bit]
[    0.667184] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.667263] pci 0000:00:19.0: [8086:1502] type 00 class 0x020000
[    0.667283] pci 0000:00:19.0: reg 0x10: [mem 0xd4700000-0xd471ffff]
[    0.667291] pci 0000:00:19.0: reg 0x14: [mem 0xd473a000-0xd473afff]
[    0.667299] pci 0000:00:19.0: reg 0x18: [io  0x4060-0x407f]
[    0.667366] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.667443] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[    0.667463] pci 0000:00:1a.0: reg 0x10: [mem 0xd4739000-0xd47393ff]
[    0.667540] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.667616] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[    0.667636] pci 0000:00:1b.0: reg 0x10: [mem 0xd4730000-0xd4733fff 64bit]
[    0.667709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.667794] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[    0.667884] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.667967] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[    0.668055] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.668139] pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
[    0.668233] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[    0.668314] pci 0000:00:1c.3: [8086:1e16] type 01 class 0x060400
[    0.668407] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.668493] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[    0.668513] pci 0000:00:1d.0: reg 0x10: [mem 0xd4738000-0xd47383ff]
[    0.668590] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.668667] pci 0000:00:1f.0: [8086:1e55] type 00 class 0x060100
[    0.668849] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[    0.668867] pci 0000:00:1f.2: reg 0x10: [io  0x4088-0x408f]
[    0.668875] pci 0000:00:1f.2: reg 0x14: [io  0x4094-0x4097]
[    0.668883] pci 0000:00:1f.2: reg 0x18: [io  0x4080-0x4087]
[    0.668890] pci 0000:00:1f.2: reg 0x1c: [io  0x4090-0x4093]
[    0.668898] pci 0000:00:1f.2: reg 0x20: [io  0x4040-0x405f]
[    0.668906] pci 0000:00:1f.2: reg 0x24: [mem 0xd4737000-0xd47377ff]
[    0.668953] pci 0000:00:1f.2: PME# supported from D3hot
[    0.669065] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.669071] pci 0000:00:1c.0:   bridge window [mem 0xd4600000-0xd46fffff]
[    0.669188] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
[    0.669192] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
[    0.669195] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
[    0.669317] pci 0000:23:00.0: [197b:2380] type 00 class 0x0c0010
[    0.669365] pci 0000:23:00.0: reg 0x10: [mem 0xd4500000-0xd45007ff]
[    0.669388] pci 0000:23:00.0: reg 0x14: [mem 0xd4505000-0xd45050ff]
[    0.669690] pci 0000:23:00.1: [197b:2392] type 00 class 0x088000
[    0.669724] pci 0000:23:00.1: reg 0x10: [mem 0xd4504000-0xd45040ff]
[    0.669802] pci 0000:23:00.1: reg 0x30: [mem 0xffff8000-0xffffffff pref]
[    0.669990] pci 0000:23:00.2: [197b:2391] type 00 class 0x080501
[    0.670028] pci 0000:23:00.2: reg 0x10: [mem 0xd4503000-0xd45030ff]
[    0.680065] pci 0000:00:1c.2: PCI bridge to [bus 23]
[    0.680088] pci 0000:00:1c.2:   bridge window [mem 0xd4500000-0xd45fffff]
[    0.680298] pci 0000:24:00.0: [8086:0082] type 00 class 0x028000
[    0.680519] pci 0000:24:00.0: reg 0x10: [mem 0xd4400000-0xd4401fff 64bit]
[    0.681256] pci 0000:24:00.0: PME# supported from D0 D3hot D3cold
[    0.690164] pci 0000:00:1c.3: PCI bridge to [bus 24]
[    0.690170] pci 0000:00:1c.3:   bridge window [mem 0xd4400000-0xd44fffff]
[    0.691317] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.691388] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.691457] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.691525] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.691593] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.691661] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.691728] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.691795] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[    0.692238] ACPI: EC: interrupt unblocked
[    0.692245] ACPI: EC: event unblocked
[    0.692252] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x16, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.692253] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
[    0.692319] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.692319] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.692319] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.692319] vgaarb: loaded
[    0.692319] EDAC MC: Ver: 3.0.0
[    0.692319] Registered efivars operations
[    0.940020] PCI: Using ACPI for IRQ routing
[    0.946045] PCI: pci_cache_line_size set to 64 bytes
[    0.946150] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.946151] e820: reserve RAM buffer [mem 0xb88ff000-0xbbffffff]
[    0.946153] e820: reserve RAM buffer [mem 0xb9ce1018-0xbbffffff]
[    0.946154] e820: reserve RAM buffer [mem 0xb9cea018-0xbbffffff]
[    0.946155] e820: reserve RAM buffer [mem 0xb9dff000-0xbbffffff]
[    0.946156] e820: reserve RAM buffer [mem 0xba000000-0xbbffffff]
[    0.946157] e820: reserve RAM buffer [mem 0x23ee00000-0x23fffffff]
[    0.946239] NetLabel: Initializing
[    0.946240] NetLabel:  domain hash size = 128
[    0.946240] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.946254] NetLabel:  unlabeled traffic allowed by default
[    0.946695] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.946701] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.949722] clocksource: Switched to clocksource tsc-early
[    0.956180] VFS: Disk quotas dquot_6.6.0
[    0.956198] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.956263] pnp: PnP ACPI init
[    0.956512] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.956514] system 00:00: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.956516] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.956517] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.956519] system 00:00: [mem 0xe0000000-0xefffffff] could not be reserved
[    0.956521] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.956522] system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.956524] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.956525] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.956531] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.956709] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[    0.956786] system 00:02: [io  0x0200-0x027f] has been reserved
[    0.956788] system 00:02: [io  0x1000-0x100f] has been reserved
[    0.956790] system 00:02: [io  0xffff] has been reserved
[    0.956791] system 00:02: [io  0xffff] has been reserved
[    0.956793] system 00:02: [io  0x0400-0x047f] has been reserved
[    0.956794] system 00:02: [io  0x0500-0x057f] has been reserved
[    0.956796] system 00:02: [io  0xef80-0xef9f] has been reserved
[    0.956800] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.956824] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.957368] pnp 00:04: [dma 0 disabled]
[    0.957447] pnp 00:04: Plug and Play ACPI device, IDs PNP0401 (active)
[    0.957468] pnp 00:05: Plug and Play ACPI device, IDs HPQ8001 PNP0303 (active)
[    0.957487] pnp 00:06: Plug and Play ACPI device, IDs SYN018e SYN0100 SYN0002 PNP0f13 (active)
[    0.957827] system 00:07: [mem 0x20000000-0x201fffff] could not be reserved
[    0.957829] system 00:07: [mem 0x40004000-0x40004fff] could not be reserved
[    0.957833] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.958114] pnp: PnP ACPI: found 8 devices
[    0.963893] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.963898] pci 0000:23:00.1: can't claim BAR 6 [mem 0xffff8000-0xffffffff pref]: no compatible bridge window
[    0.963919] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02-22] add_size 200000 add_align 100000
[    0.963942] pci 0000:00:1c.1: BAR 15: assigned [mem 0xbf200000-0xbf3fffff 64bit pref]
[    0.963945] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.963950] pci 0000:00:1c.0:   bridge window [mem 0xd4600000-0xd46fffff]
[    0.963959] pci 0000:00:1c.1: PCI bridge to [bus 02-22]
[    0.963962] pci 0000:00:1c.1:   bridge window [io  0x2000-0x3fff]
[    0.963967] pci 0000:00:1c.1:   bridge window [mem 0xd0000000-0xd3ffffff]
[    0.963971] pci 0000:00:1c.1:   bridge window [mem 0xbf200000-0xbf3fffff 64bit pref]
[    0.963978] pci 0000:23:00.1: BAR 6: assigned [mem 0xd4508000-0xd450ffff pref]
[    0.963980] pci 0000:00:1c.2: PCI bridge to [bus 23]
[    0.963985] pci 0000:00:1c.2:   bridge window [mem 0xd4500000-0xd45fffff]
[    0.963993] pci 0000:00:1c.3: PCI bridge to [bus 24]
[    0.963998] pci 0000:00:1c.3:   bridge window [mem 0xd4400000-0xd44fffff]
[    0.964007] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.964008] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.964010] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.964011] pci_bus 0000:00: resource 7 [mem 0xbf200000-0xdfffffff window]
[    0.964012] pci_bus 0000:00: resource 8 [mem 0xf0000000-0xfedfffff window]
[    0.964013] pci_bus 0000:00: resource 9 [mem 0xfee01000-0xffffffff window]
[    0.964015] pci_bus 0000:01: resource 1 [mem 0xd4600000-0xd46fffff]
[    0.964017] pci_bus 0000:02: resource 0 [io  0x2000-0x3fff]
[    0.964018] pci_bus 0000:02: resource 1 [mem 0xd0000000-0xd3ffffff]
[    0.964019] pci_bus 0000:02: resource 2 [mem 0xbf200000-0xbf3fffff 64bit pref]
[    0.964021] pci_bus 0000:23: resource 1 [mem 0xd4500000-0xd45fffff]
[    0.964022] pci_bus 0000:24: resource 1 [mem 0xd4400000-0xd44fffff]
[    0.964141] NET: Registered protocol family 2
[    0.964280] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.964308] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.964419] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.964536] TCP: Hash tables configured (established 65536 bind 65536)
[    0.964568] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.964588] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.964641] NET: Registered protocol family 1
[    0.964653] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.964660] pci 0000:00:14.0: enabling device (0000 -> 0002)
[    0.964832] pci 0000:00:14.0: can't derive routing for PCI INT A
[    0.964833] pci 0000:00:14.0: PCI INT A: not connected
[    0.964881] pci 0000:00:1a.0: enabling device (0000 -> 0002)
[    0.965236] pci 0000:00:1d.0: enabling device (0000 -> 0002)
[    0.965599] PCI: CLS 64 bytes, default 64
[    0.965634] Unpacking initramfs...
[    1.076132] Freeing initrd memory: 7712K
[    1.076140] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.076143] software IO TLB [mem 0xb0381000-0xb4381000] (64MB) mapped at [        (ptrval)-        (ptrval)]
[    1.076252] Scanning for low memory corruption every 60 seconds
[    1.076731] Initialise system trusted keyrings
[    1.076741] Key type blacklist registered
[    1.076795] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.077739] zbud: loaded
[    1.079030] Key type asymmetric registered
[    1.079031] Asymmetric key parser 'x509' registered
[    1.079056] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    1.079090] io scheduler noop registered
[    1.079091] io scheduler deadline registered
[    1.079127] io scheduler cfq registered
[    1.079128] io scheduler mq-deadline registered
[    1.079128] io scheduler kyber registered
[    1.079133] io scheduler bfq registered
[    1.079151] io scheduler bfq-sq registered (default)
[    1.079152] BFQ I/O-scheduler: v8r12 (with cgroups support)
[    1.079169] io scheduler bfq-mq registered
[    1.079170] BFQ I/O-scheduler: v8r12 (with cgroups support)
[    1.079319] pcieport 0000:00:1c.0: enabling device (0000 -> 0002)
[    1.079636] pcieport 0000:00:1c.1: enabling device (0000 -> 0003)
[    1.080423] pcieport 0000:00:1c.0: Signaling PME with IRQ 24
[    1.080446] pcieport 0000:00:1c.1: Signaling PME with IRQ 25
[    1.080467] pcieport 0000:00:1c.2: Signaling PME with IRQ 26
[    1.080501] pcieport 0000:00:1c.3: Signaling PME with IRQ 27
[    1.080521] pciehp 0000:00:1c.1:pcie004: Slot #1 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+ Interlock- NoCompl+ LLActRep+
[    1.080588] efifb: probing for efifb
[    1.080601] efifb: framebuffer at 0xc0000000, using 5628k, total 5625k
[    1.080602] efifb: mode is 1600x900x32, linelength=6400, pages=1
[    1.080602] efifb: scrolling: redraw
[    1.080604] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.083102] Console: switching to colour frame buffer device 200x56
[    1.085525] fb0: EFI VGA frame buffer device
[    1.085534] intel_idle: MWAIT substates: 0x21120
[    1.085535] intel_idle: v0.4.1 model 0x3A
[    1.085660] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.085720] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
[    1.085728] ACPI: Sleep Button [SLPB]
[    1.085759] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.085764] ACPI: Lid Switch [LID]
[    1.085791] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.085809] ACPI: Power Button [PWRF]
[    1.110214] thermal LNXTHERM:00: registered as thermal_zone0
[    1.110215] ACPI: Thermal Zone [CPUZ] (75 C)
[    1.134242] thermal LNXTHERM:01: registered as thermal_zone1
[    1.134243] ACPI: Thermal Zone [GFXZ] (0 C)
[    1.149164] thermal LNXTHERM:02: registered as thermal_zone2
[    1.149165] ACPI: Thermal Zone [EXTZ] (43 C)
[    1.164206] thermal LNXTHERM:03: registered as thermal_zone3
[    1.164207] ACPI: Thermal Zone [LOCZ] (42 C)
[    1.179218] thermal LNXTHERM:04: registered as thermal_zone4
[    1.179219] ACPI: Thermal Zone [BATZ] (20 C)
[    1.179590] thermal LNXTHERM:05: registered as thermal_zone5
[    1.179591] ACPI: Thermal Zone [PCHZ] (0 C)
[    1.179773] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.180811] intel_pstate: Intel P-state driver initializing
[    1.180934] ledtrig-cpu: registered to indicate activity on CPUs
[    1.181372] NET: Registered protocol family 10
[    1.188601] Segment Routing with IPv6
[    1.188646] NET: Registered protocol family 17
[    1.189054] RAS: Correctable Errors collector initialized.
[    1.189118] microcode: sig=0x306a9, pf=0x10, revision=0x16
[    1.189220] microcode: Microcode Update Driver: v2.2.
[    1.189238] sched_clock: Marking stable (1189204769, 0)->(1225922994, -36718225)
[    1.189705] registered taskstats version 1
[    1.189716] Loading compiled-in X.509 certificates
[    1.189745] zswap: loaded using pool lzo/zbud
[    1.194817] Key type big_key registered
[    1.195129]   Magic number: 2:313:379
[    1.195183] hctosys: unable to open rtc device (rtc0)
[    1.196526] Freeing unused kernel memory: 1448K
[    1.196527] Write protecting the kernel read-only data: 18432k
[    1.197241] Freeing unused kernel memory: 2012K
[    1.200253] Freeing unused kernel memory: 692K
[    1.200254] CFS CPU scheduler.
[    1.681288] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    1.683732] i8042: Detected active multiplexing controller, rev 1.1
[    1.684556] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.684606] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.684649] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.684691] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.684726] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.690029] ACPI: bus type USB registered
[    1.690050] usbcore: registered new interface driver usbfs
[    1.690057] usbcore: registered new interface driver hub
[    1.690169] usbcore: registered new device driver usb
[    1.691757] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.692541] ehci-pci: EHCI PCI platform driver
[    1.692981] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    1.692989] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    1.693005] ehci-pci 0000:00:1a.0: debug port 2
[    1.693355] sdhci: Secure Digital Host Controller Interface driver
[    1.693355] sdhci: Copyright(c) Pierre Ossman
[    1.696943] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    1.696959] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd4739000
[    1.697180] SCSI subsystem initialized
[    1.702004] libata version 3.00 loaded.
[    1.710033] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    1.710113] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.710115] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.710116] usb usb1: Product: EHCI Host Controller
[    1.710117] usb usb1: Manufacturer: Linux 4.16.12-1-zen ehci_hcd
[    1.710118] usb usb1: SerialNumber: 0000:00:1a.0
[    1.710241] hub 1-0:1.0: USB hub found
[    1.710248] hub 1-0:1.0: 3 ports detected
[    1.710698] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.710703] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    1.710716] ehci-pci 0000:00:1d.0: debug port 2
[    1.714612] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.714619] ehci-pci 0000:00:1d.0: irq 16, io mem 0xd4738000
[    1.726714] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.726769] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    1.726771] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.726772] usb usb2: Product: EHCI Host Controller
[    1.726774] usb usb2: Manufacturer: Linux 4.16.12-1-zen ehci_hcd
[    1.726776] usb usb2: SerialNumber: 0000:00:1d.0
[    1.726939] hub 2-0:1.0: USB hub found
[    1.726960] hub 2-0:1.0: 3 ports detected
[    1.727486] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
[    1.727488] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
[    1.727517] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.727525] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[    1.728606] xhci_hcd 0000:00:14.0: hcc params 0x20007181 hci version 0x100 quirks 0x0000b930
[    1.728616] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.728817] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[    1.728820] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.728823] usb usb3: Product: xHCI Host Controller
[    1.728825] usb usb3: Manufacturer: Linux 4.16.12-1-zen xhci-hcd
[    1.728827] usb usb3: SerialNumber: 0000:00:14.0
[    1.728963] hub 3-0:1.0: USB hub found
[    1.728975] hub 3-0:1.0: 4 ports detected
[    1.729474] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.729480] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[    1.729483] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.729526] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[    1.729528] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.729530] usb usb4: Product: xHCI Host Controller
[    1.729531] usb usb4: Manufacturer: Linux 4.16.12-1-zen xhci-hcd
[    1.729533] usb usb4: SerialNumber: 0000:00:14.0
[    1.729641] hub 4-0:1.0: USB hub found
[    1.729653] hub 4-0:1.0: 4 ports detected
[    1.730192] ahci 0000:00:1f.2: version 3.0
[    1.730613] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.730933] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    1.741210] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3b impl SATA mode
[    1.741215] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems sxs apst 
[    1.760172] firewire_ohci 0000:23:00.0: added OHCI v1.10 device as card 0, 4 IR + 4 IT contexts, quirks 0x10
[    1.760311] sdhci-pci 0000:23:00.1: SDHCI controller found [197b:2392] (rev 30)
[    1.760336] sdhci-pci 0000:23:00.1: enabling device (0000 -> 0002)
[    1.760552] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[    1.760759] mmc0: SDHCI controller on PCI [0000:23:00.1] using DMA
[    1.760826] sdhci-pci 0000:23:00.2: SDHCI controller found [197b:2391] (rev 30)
[    1.760843] sdhci-pci 0000:23:00.2: enabling device (0000 -> 0002)
[    1.760947] sdhci-pci 0000:23:00.2: Refusing to bind to secondary interface.
[    1.781093] scsi host0: ahci
[    1.781466] scsi host1: ahci
[    1.781698] scsi host2: ahci
[    1.781893] scsi host3: ahci
[    1.782099] scsi host4: ahci
[    1.782261] scsi host5: ahci
[    1.782358] ata1: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737100 irq 29
[    1.782364] ata2: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737180 irq 29
[    1.782366] ata3: DUMMY
[    1.782371] ata4: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737280 irq 29
[    1.782376] ata5: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737300 irq 29
[    1.782381] ata6: SATA max UDMA/133 abar m2048@0xd4737000 port 0xd4737380 irq 29
[    2.040042] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    2.056708] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    2.080035] tsc: Refined TSC clocksource calibration: 2693.880 MHz
[    2.080048] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d4a90bb86, max_idle_ns: 440795202126 ns
[    2.080091] clocksource: Switched to clocksource tsc
[    2.096641] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.097708] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.097898] ata1.00: ATA-9: TS256GSSD370S, O0919A, max UDMA/133
[    2.097903] ata1.00: 500118192 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[    2.098550] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.098774] ata1.00: configured for UDMA/133
[    2.100194] scsi 0:0:0:0: Direct-Access     ATA      TS256GSSD370S    9A   PQ: 0 ANSI: 5
[    2.187151] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.187155] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.187617] hub 1-1:1.0: USB hub found
[    2.187752] hub 1-1:1.0: 6 ports detected
[    2.203777] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    2.203781] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.204177] hub 2-1:1.0: USB hub found
[    2.204242] hub 2-1:1.0: 8 ports detected
[    2.266905] firewire_core 0000:23:00.0: created device fw0: GUID ffe473fffffffffe, S400
[    2.413306] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.417998] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.418006] ata2.00: ATAPI: hp       CDDVDW SN-208FB, HH00, max UDMA/100
[    2.425014] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[    2.425024] ata2.00: configured for UDMA/100
[    2.446764] scsi 1:0:0:0: CD-ROM            hp       CDDVDW SN-208FB  HH00 PQ: 0 ANSI: 5
[    2.466709] usb 1-1.1: new full-speed USB device number 3 using ehci-pci
[    2.483370] usb 2-1.6: new full-speed USB device number 3 using ehci-pci
[    2.564785] usb 1-1.1: New USB device found, idVendor=138a, idProduct=003d
[    2.564790] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.564793] usb 1-1.1: SerialNumber: 002014e55b80
[    2.583902] usb 2-1.6: New USB device found, idVendor=0a5c, idProduct=21e1
[    2.583906] usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    2.583909] usb 2-1.6: Product: BCM20702A0
[    2.583912] usb 2-1.6: Manufacturer: Broadcom Corp
[    2.583914] usb 2-1.6: SerialNumber: 485AB6F1ED2E
[    2.636710] usb 1-1.2: new full-speed USB device number 4 using ehci-pci
[    2.656709] usb 2-1.8: new full-speed USB device number 4 using ehci-pci
[    2.667754] random: fast init done
[    2.737999] usb 1-1.2: New USB device found, idVendor=24ae, idProduct=2010
[    2.738003] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.738006] usb 1-1.2: Product: Rapoo 2.4G Wireless Device
[    2.738009] usb 1-1.2: Manufacturer: RAPOO
[    2.742341] hidraw: raw HID events driver (C) Jiri Kosina
[    2.749366] usbcore: registered new interface driver usbhid
[    2.749369] usbhid: USB HID core driver
[    2.750932] input: RAPOO Rapoo 2.4G Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:24AE:2010.0001/input/input8
[    2.750996] hid-generic 0003:24AE:2010.0001: input,hidraw0: USB HID v1.10 Mouse [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:00:1a.0-1.2/input0
[    2.751339] input: RAPOO Rapoo 2.4G Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:24AE:2010.0002/input/input9
[    2.806909] hid-generic 0003:24AE:2010.0002: input,hiddev0,hidraw1: USB HID v1.10 Device [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:00:1a.0-1.2/input1
[    2.807278] input: RAPOO Rapoo 2.4G Wireless Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:24AE:2010.0003/input/input10
[    2.816769] ata4: SATA link down (SStatus 0 SControl 300)
[    2.863547] hid-generic 0003:24AE:2010.0003: input,hidraw2: USB HID v1.10 Keyboard [RAPOO Rapoo 2.4G Wireless Device] on usb-0000:00:1a.0-1.2/input2
[    3.129975] ata5: SATA link down (SStatus 0 SControl 300)
[    3.443302] ata6: SATA link down (SStatus 0 SControl 300)
[    3.448881] sd 0:0:0:0: [sda] 500118192 512-byte logical blocks: (256 GB/238 GiB)
[    3.448894] sd 0:0:0:0: [sda] Write Protect is off
[    3.448897] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    3.448925] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    3.453934]  sda: sda1 sda2
[    3.454233] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.484393] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    3.484396] cdrom: Uniform CD-ROM driver Revision: 3.20
[    3.484554] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    4.431402] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    4.547968] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
[    4.563629] systemd[1]: Detected architecture x86-64.
[    4.566718] systemd[1]: Set hostname to <arch>.
[    4.680757] random: systemd: uninitialized urandom read (16 bytes read)
[    4.680834] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[    4.681003] random: systemd: uninitialized urandom read (16 bytes read)
[    4.681013] systemd[1]: Reached target Login Prompts.
[    4.686176] random: systemd: uninitialized urandom read (16 bytes read)
[    4.686372] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    4.686621] systemd[1]: Listening on udev Control Socket.
[    4.686819] systemd[1]: Listening on LVM2 poll daemon socket.
[    4.686931] systemd[1]: Reached target Remote File Systems.
[    4.688326] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[    4.724211] EXT4-fs (sda2): re-mounted. Opts: data=ordered
[    4.771353] systemd-journald[233]: Received request to flush runtime journal from PID 1
[    4.778151] systemd-journald[233]: File /var/log/journal/b4fd81c540cb4addb2ea03e90ea59f44/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    4.868596] Adding 4194300k swap on /swapfile.  Priority:-2 extents:9 across:4505596k SSFS
[    4.881466] ACPI: Battery Slot [BAT0] (battery absent)
[    4.881592] ACPI: Battery Slot [BAT1] (battery absent)
[    4.882289] ACPI: AC Adapter [AC] (on-line)
[    4.883429] input: HP Wireless hotkeys as /devices/virtual/input/input11
[    4.887119] hp_accel: hardware type HPB64xx found
[    4.887834] lis3lv02d: 8 bits 3DC sensor found
[    4.930073] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input12
[    4.944624] rtc_cmos 00:03: RTC can wake from S4
[    4.945343] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[    4.945376] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    4.945690] pps_core: LinuxPPS API ver. 1 registered
[    4.945691] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    4.947790] PTP clock support registered
[    4.949306] parport_pc 00:04: reported by Plug and Play ACPI
[    4.949386] parport0: PC-style at 0x378 (0x778), irq 5
[    4.949713] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    4.950365] mousedev: PS/2 mouse device common for all mice
[    4.956587] , using FIFO [PCSPP,TRISTATE,COMPAT,EPP,ECP]
[    4.960762] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20180105/utaddress-247)
[    4.960770] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.960773] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[    4.960778] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.960779] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[    4.960783] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.960784] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x0000000000000563 (\GPIO) (20180105/utaddress-247)
[    4.960788] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    4.960789] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    4.965262] Linux agpgart interface v0.103
[    5.016156] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 163840 ms ovfl timer
[    5.016158] RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
[    5.016159] RAPL PMU: hw unit of domain package 2^-16 Joules
[    5.016160] RAPL PMU: hw unit of domain pp1-gpu 2^-16 Joules
[    5.016428] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    5.016429] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    5.016826] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    5.046380] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[    5.103431] tpm tpm0: A TPM error (7) occurred attempting to read a pcr value
[    5.104370] tpm tpm0: TPM is disabled/deactivated (0x7)
[    5.107359] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    5.112614] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    5.116496] Bluetooth: Core ver 2.22
[    5.116514] NET: Registered protocol family 31
[    5.116515] Bluetooth: HCI device and connection manager initialized
[    5.116518] Bluetooth: HCI socket layer initialized
[    5.116521] Bluetooth: L2CAP socket layer initialized
[    5.116528] Bluetooth: SCO socket layer initialized
[    5.116898] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    5.116901] cfg80211: failed to load regulatory.db
[    5.119738] tpm tpm0: A TPM error (7) occurred attempting get random
[    5.133520] usbcore: registered new interface driver btusb
[    5.151713] Intel(R) Wireless WiFi driver for Linux
[    5.151715] Copyright(c) 2003- 2015 Intel Corporation
[    5.151826] iwlwifi 0000:24:00.0: enabling device (0000 -> 0002)
[    5.151998] iwlwifi 0000:24:00.0: can't disable ASPM; OS doesn't have ASPM control
[    5.156866] iwlwifi 0000:24:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[    5.169320] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    5.244575] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUG enabled
[    5.244578] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[    5.244579] iwlwifi 0000:24:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[    5.244581] iwlwifi 0000:24:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[    5.279102] ppdev: user-space parallel port driver
[    5.285763] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    5.296511] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) c4:34:6b:24:26:cd
[    5.296522] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    5.296554] e1000e 0000:00:19.0 eth0: MAC: 10, PHY: 11, PBA No: FFFFFF-0FF
[    5.296700] snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
[    5.299083] checking generic (c0000000 57f000) vs hw (c0000000 10000000)
[    5.299086] fb: switching to inteldrmfb from EFI VGA
[    5.299108] Console: switching to colour dummy device 80x25
[    5.299203] [drm] Replacing VGA console driver
[    5.299857] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.299858] [drm] Driver supports precise vblank timestamp query.
[    5.300509] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.302299] iTCO_vendor_support: vendor-support=0
[    5.304540] cryptd: max_cpu_qlen set to 1000
[    5.315648] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    5.315705] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[    5.318955] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    5.334856] iwlwifi 0000:24:00.0 wlo1: renamed from wlan0
[    5.338357] AVX version of gcm_enc/dec engaged.
[    5.338359] AES CTR mode by8 optimization enabled
[    5.346409] [drm] Initialized i915 1.6.0 20171222 for 0000:00:02.0 on minor 0
[    5.355983] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.356440] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15
[    5.356844] snd_hda_intel 0000:00:1b.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    5.358580] hp_wmi: query 0xd returned error 0x5
[    5.358743] input: HP WMI hotkeys as /devices/virtual/input/input14
[    5.361864] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    5.429638] fbcon: inteldrmfb (fb0) is primary device
[    5.429719] Console: switching to colour frame buffer device 200x56
[    5.433734] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    5.433997] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1X5: line_outs=1 (0xa/0x0/0x0/0x0/0x0) type:line
[    5.434000] snd_hda_codec_idt hdaudioC0D0:    speaker_outs=1 (0xd/0x0/0x0/0x0/0x0)
[    5.434002] snd_hda_codec_idt hdaudioC0D0:    hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[    5.434004] snd_hda_codec_idt hdaudioC0D0:    mono: mono_out=0x0
[    5.434005] snd_hda_codec_idt hdaudioC0D0:    inputs:
[    5.434007] snd_hda_codec_idt hdaudioC0D0:      Mic=0xc
[    5.434009] snd_hda_codec_idt hdaudioC0D0:      Internal Mic=0x11
[    5.434011] snd_hda_codec_idt hdaudioC0D0:      Line=0xf
[    5.454523] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[    5.454525] Bluetooth: BNEP filters: protocol multicast
[    5.454529] Bluetooth: BNEP socket layer initialized
[    5.490085] kvm: disabled by bios
[    5.497062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[    5.497359] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[    5.497419] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[    5.497475] input: HDA Intel PCH Dock Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
[    5.497535] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
[    5.497588] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
[    5.497641] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
[    5.497691] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input23
[    5.580433] intel_rapl: Found RAPL domain package
[    5.580435] intel_rapl: Found RAPL domain core
[    5.580436] intel_rapl: Found RAPL domain uncore
[    5.694140] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.940259] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    5.949738] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    5.962539] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[    6.154642] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input13
[    6.249566] random: crng init done
[    6.249569] random: 7 urandom warning(s) missed due to ratelimiting
[    6.258808] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[    6.341489] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    6.369015] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[    6.666515] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[    6.746432] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    6.973177] psmouse serio4: synaptics: queried max coordinates: x [..5728], y [..4916]
[    6.994566] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[    7.044858] psmouse serio4: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1e0b1, caps: 0xd00073/0x640000/0xa0400/0x0, board id: 1623, fw id: 790122
[    7.090581] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input26
[    7.559089] [drm:intel_dp_get_link_train_fallback_values [i915]] *ERROR* Link Training Unsuccessful
[    9.941843] fuse init (API version 7.26)
[   10.780697] [drm:intel_dp_get_link_train_fallback_values [i915]] *ERROR* Link Training Unsuccessful
[   12.576818] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[   12.585898] systemd-journald[233]: File /var/log/journal/b4fd81c540cb4addb2ea03e90ea59f44/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
[   12.875024] iwlwifi 0000:24:00.0: Radio type=0x1-0x2-0x0
[   12.958579] IPv6: ADDRCONF(NETDEV_UP): wlo1: link is not ready
[   13.212961] Bluetooth: RFCOMM TTY layer initialized
[   13.212970] Bluetooth: RFCOMM socket layer initialized
[   13.212976] Bluetooth: RFCOMM ver 1.11
[   16.204533] wlo1: authenticate with 34:81:c4:a5:94:c1
[   16.207896] wlo1: send auth to 34:81:c4:a5:94:c1 (try 1/3)
[   16.243255] wlo1: authenticated
[   16.246716] wlo1: associate with 34:81:c4:a5:94:c1 (try 1/3)
[   16.261372] wlo1: RX AssocResp from 34:81:c4:a5:94:c1 (capab=0x411 status=0 aid=1)
[   16.278983] wlo1: associated
[   16.299612] IPv6: ADDRCONF(NETDEV_CHANGE): wlo1: link becomes ready
[   16.336435] wlo1: Limiting TX power to 20 (23 - 3) dBm as advertised by 34:81:c4:a5:94:c1

xrandr --listproviders
Providers: number : 1
Provider 0: id: 0x4c cap: 0xb, Source Output, Sink Output, Sink Offload crtcs: 4 outputs: 9 associated providers: 0 name:Intel

Xorg log

[     8.725] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[     8.725] Build Operating System: Linux Arch Linux
[     8.725] Current Operating System: Linux arch 4.16.12-1-zen #1 ZEN SMP PREEMPT Fri May 25 23:30:20 UTC 2018 x86_64
[     8.725] Kernel command line: initrd=\initramfs-linux-zen.img root=PARTUUID=d40e15ac-687b-451c-a564-cd864c93afd7 rw
[     8.725] Build Date: 16 May 2018  05:24:07PM
[     8.725]  
[     8.725] Current version of pixman: 0.34.0
[     8.725] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     8.725] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     8.725] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 31 13:23:03 2018
[     8.725] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     8.725] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     8.725] (==) No Layout section.  Using the first Screen section.
[     8.725] (==) No screen section available. Using defaults.
[     8.725] (**) |-->Screen "Default Screen Section" (0)
[     8.725] (**) |   |-->Monitor "<default monitor>"
[     8.726] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     8.726] (==) Automatically adding devices
[     8.726] (==) Automatically enabling devices
[     8.726] (==) Automatically adding GPU devices
[     8.726] (==) Automatically binding GPU devices
[     8.726] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     8.726] (WW) The directory "/usr/share/fonts/misc" does not exist.
[     8.726] 	Entry deleted from font path.
[     8.726] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[     8.726] 	Entry deleted from font path.
[     8.726] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[     8.726] 	Entry deleted from font path.
[     8.726] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[     8.726] 	Entry deleted from font path.
[     8.726] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[     8.726] 	Entry deleted from font path.
[     8.726] (==) FontPath set to:
	/usr/share/fonts/TTF
[     8.726] (==) ModulePath set to "/usr/lib/xorg/modules"
[     8.726] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     8.726] (II) Module ABI versions:
[     8.726] 	X.Org ANSI C Emulation: 0.4
[     8.726] 	X.Org Video Driver: 24.0
[     8.726] 	X.Org XInput driver : 24.1
[     8.726] 	X.Org Server Extension : 10.0
[     8.726] (++) using VT number 7

[     8.726] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     8.727] (II) xfree86: Adding drm device (/dev/dri/card0)
[     8.747] (--) PCI:*(0@0:2:0) 8086:0166:103c:179b rev 9, Mem @ 0xd4000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64, BIOS @ 0x????????/131072
[     8.747] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     8.747] (II) LoadModule: "glx"
[     8.747] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     8.749] (II) Module glx: vendor="X.Org Foundation"
[     8.749] 	compiled for 1.20.0, module version = 1.0.0
[     8.749] 	ABI class: X.Org Server Extension, version 10.0
[     8.749] (==) Matched intel as autoconfigured driver 0
[     8.749] (==) Matched modesetting as autoconfigured driver 1
[     8.749] (==) Matched fbdev as autoconfigured driver 2
[     8.749] (==) Matched vesa as autoconfigured driver 3
[     8.749] (==) Assigned the driver to the xf86ConfigLayout
[     8.749] (II) LoadModule: "intel"
[     8.749] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     8.749] (II) Module intel: vendor="X.Org Foundation"
[     8.749] 	compiled for 1.20.0, module version = 2.99.917
[     8.749] 	Module class: X.Org Video Driver
[     8.749] 	ABI class: X.Org Video Driver, version 24.0
[     8.749] (II) LoadModule: "modesetting"
[     8.749] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[     8.750] (II) Module modesetting: vendor="X.Org Foundation"
[     8.750] 	compiled for 1.20.0, module version = 1.20.0
[     8.750] 	Module class: X.Org Video Driver
[     8.750] 	ABI class: X.Org Video Driver, version 24.0
[     8.750] (II) LoadModule: "fbdev"
[     8.750] (WW) Warning, couldn't open module fbdev
[     8.750] (EE) Failed to load module "fbdev" (module does not exist, 0)
[     8.750] (II) LoadModule: "vesa"
[     8.750] (WW) Warning, couldn't open module vesa
[     8.750] (EE) Failed to load module "vesa" (module does not exist, 0)
[     8.750] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     8.750] (II) intel: Driver for Intel(R) HD Graphics
[     8.750] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     8.750] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     8.750] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[     8.750] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20171222
[     8.750] (II) intel(0): SNA compiled from 2.99.917-831-ge7bfc906
[     8.767] (WW) Falling back to old probe method for modesetting
[     8.767] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[     8.767] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[     8.767] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     8.768] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     8.768] (==) intel(0): RGB weight 888
[     8.768] (==) intel(0): Default visual is TrueColor
[     8.768] (II) intel(0): Output LVDS1 has no monitor section
[     8.768] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[     8.768] (II) intel(0): Enabled output LVDS1
[     8.768] (II) intel(0): Output VGA1 has no monitor section
[     8.768] (II) intel(0): Enabled output VGA1
[     8.769] (II) intel(0): Output HDMI1 has no monitor section
[     8.769] (II) intel(0): Enabled output HDMI1
[     8.769] (II) intel(0): Output DP1 has no monitor section
[     8.769] (II) intel(0): Enabled output DP1
[     8.769] (II) intel(0): Output HDMI2 has no monitor section
[     8.769] (II) intel(0): Enabled output HDMI2
[     8.769] (II) intel(0): Output HDMI3 has no monitor section
[     8.769] (II) intel(0): Enabled output HDMI3
[     8.769] (II) intel(0): Output DP2 has no monitor section
[     8.769] (II) intel(0): Enabled output DP2
[     8.769] (II) intel(0): Output DP3 has no monitor section
[     8.769] (II) intel(0): Enabled output DP3
[     8.769] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     8.770] (II) intel(0): Output VIRTUAL1 has no monitor section
[     8.770] (II) intel(0): Enabled output VIRTUAL1
[     8.770] (--) intel(0): Output LVDS1 using initial mode 1600x900 on pipe 0
[     8.770] (--) intel(0): Output DP3 using initial mode 1280x800 on pipe 1
[     8.770] (==) intel(0): TearFree disabled
[     8.770] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     8.770] (==) intel(0): DPI set to (96, 96)
[     8.770] (II) Loading sub module "dri3"
[     8.770] (II) LoadModule: "dri3"
[     8.770] (II) Module "dri3" already built-in
[     8.770] (II) Loading sub module "dri2"
[     8.770] (II) LoadModule: "dri2"
[     8.770] (II) Module "dri2" already built-in
[     8.770] (II) Loading sub module "present"
[     8.770] (II) LoadModule: "present"
[     8.770] (II) Module "present" already built-in
[     8.770] (II) UnloadModule: "modesetting"
[     8.770] (II) Unloading modesetting
[     8.771] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[     8.771] (==) intel(0): Backing store enabled
[     8.771] (==) intel(0): Silken mouse disabled
[     8.771] (II) intel(0): HW Cursor enabled
[     8.771] (==) intel(0): DPMS enabled
[     8.771] (==) intel(0): Display hotplug detection enabled
[     8.771] (II) intel(0): [DRI2] Setup complete
[     8.771] (II) intel(0): [DRI2]   DRI driver: i965
[     8.771] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     8.771] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     8.771] (II) intel(0): hardware support for Present enabled
[     8.771] (II) Initializing extension Generic Event Extension
[     8.771] (II) Initializing extension SHAPE
[     8.772] (II) Initializing extension MIT-SHM
[     8.772] (II) Initializing extension XInputExtension
[     8.772] (II) Initializing extension XTEST
[     8.772] (II) Initializing extension BIG-REQUESTS
[     8.772] (II) Initializing extension SYNC
[     8.773] (II) Initializing extension XKEYBOARD
[     8.773] (II) Initializing extension XC-MISC
[     8.773] (II) Initializing extension SECURITY
[     8.773] (II) Initializing extension XFIXES
[     8.773] (II) Initializing extension RENDER
[     8.774] (II) Initializing extension RANDR
[     8.774] (II) Initializing extension COMPOSITE
[     8.774] (II) Initializing extension DAMAGE
[     8.774] (II) Initializing extension MIT-SCREEN-SAVER
[     8.775] (II) Initializing extension DOUBLE-BUFFER
[     8.775] (II) Initializing extension RECORD
[     8.775] (II) Initializing extension DPMS
[     8.775] (II) Initializing extension Present
[     8.775] (II) Initializing extension DRI3
[     8.775] (II) Initializing extension X-Resource
[     8.776] (II) Initializing extension XVideo
[     8.776] (II) Initializing extension XVideo-MotionCompensation
[     8.776] (II) Initializing extension GLX
[     8.785] (II) AIGLX: Loaded and initialized i965
[     8.785] (II) GLX: Initialized DRI2 GL provider for screen 0
[     8.785] (II) Initializing extension XFree86-VidModeExtension
[     8.785] (II) Initializing extension XFree86-DGA
[     8.785] (II) Initializing extension XFree86-DRI
[     8.785] (II) Initializing extension DRI2
[     8.787] (II) intel(0): switch to mode 1600x900@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[     8.787] (II) intel(0): switch to mode 1280x800@60.0 on DP3 using pipe 1, position (0, 0), rotation normal, reflection none
[     8.794] (II) intel(0): Setting screen physical size to 423 x 238
[     8.840] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     8.840] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[     8.840] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     8.840] (**) Power Button: Applying InputClass "system-keyboard"
[     8.840] (II) LoadModule: "libinput"
[     8.840] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     8.841] (II) Module libinput: vendor="X.Org Foundation"
[     8.841] 	compiled for 1.19.6, module version = 0.27.1
[     8.841] 	Module class: X.Org XInput Driver
[     8.841] 	ABI class: X.Org XInput driver, version 24.1
[     8.841] (II) Using input driver 'libinput' for 'Power Button'
[     8.841] (**) Power Button: always reports core events
[     8.841] (**) Option "Device" "/dev/input/event2"
[     8.841] (**) Option "_source" "server/udev"
[     8.841] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     8.841] (II) event2  - Power Button: device is a keyboard
[     8.842] (II) event2  - Power Button: device removed
[     8.860] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     8.860] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     8.860] (WW) Option "xkb_model" requires a string value
[     8.860] (**) Option "xkb_layout" "de"
[     8.860] (**) Option "xkb_variant" ","
[     8.860] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     8.889] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     8.889] (II) event2  - Power Button: device is a keyboard
[     8.889] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[     8.890] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[     8.890] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     8.890] (**) Video Bus: Applying InputClass "system-keyboard"
[     8.890] (II) Using input driver 'libinput' for 'Video Bus'
[     8.890] (**) Video Bus: always reports core events
[     8.890] (**) Option "Device" "/dev/input/event9"
[     8.890] (**) Option "_source" "server/udev"
[     8.890] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[     8.890] (II) event9  - Video Bus: device is a keyboard
[     8.890] (II) event9  - Video Bus: device removed
[     8.966] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input15/event9"
[     8.966] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     8.967] (WW) Option "xkb_model" requires a string value
[     8.967] (**) Option "xkb_layout" "de"
[     8.967] (**) Option "xkb_variant" ","
[     8.967] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     8.968] (II) event9  - Video Bus: is tagged by udev as: Keyboard
[     8.968] (II) event9  - Video Bus: device is a keyboard
[     8.969] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[     8.969] (II) No input driver specified, ignoring this device.
[     8.969] (II) This device may have been added with another device file.
[     8.970] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[     8.970] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[     8.970] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     8.970] (**) Sleep Button: Applying InputClass "system-keyboard"
[     8.970] (II) Using input driver 'libinput' for 'Sleep Button'
[     8.970] (**) Sleep Button: always reports core events
[     8.970] (**) Option "Device" "/dev/input/event0"
[     8.970] (**) Option "_source" "server/udev"
[     8.971] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     8.971] (II) event0  - Sleep Button: device is a keyboard
[     8.971] (II) event0  - Sleep Button: device removed
[     9.000] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[     9.000] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     9.000] (WW) Option "xkb_model" requires a string value
[     9.000] (**) Option "xkb_layout" "de"
[     9.000] (**) Option "xkb_variant" ","
[     9.000] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     9.001] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[     9.001] (II) event0  - Sleep Button: device is a keyboard
[     9.004] (II) config/udev: Adding input device RAPOO Rapoo 2.4G Wireless Device (/dev/input/event4)
[     9.004] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "evdev pointer catchall"
[     9.004] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "libinput pointer catchall"
[     9.004] (II) Using input driver 'libinput' for 'RAPOO Rapoo 2.4G Wireless Device'
[     9.004] (**) RAPOO Rapoo 2.4G Wireless Device: always reports core events
[     9.004] (**) Option "Device" "/dev/input/event4"
[     9.004] (**) Option "_source" "server/udev"
[     9.060] (II) event4  - RAPOO Rapoo 2.4G Wireless Device: is tagged by udev as: Mouse
[     9.061] (II) event4  - RAPOO Rapoo 2.4G Wireless Device: device is a pointer
[     9.061] (II) event4  - RAPOO Rapoo 2.4G Wireless Device: device removed
[     9.133] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:24AE:2010.0001/input/input8/event4"
[     9.133] (II) XINPUT: Adding extended input device "RAPOO Rapoo 2.4G Wireless Device" (type: MOUSE, id 9)
[     9.133] (**) Option "AccelerationScheme" "none"
[     9.133] (**) RAPOO Rapoo 2.4G Wireless Device: (accel) selected scheme none/0
[     9.134] (**) RAPOO Rapoo 2.4G Wireless Device: (accel) acceleration factor: 2.000
[     9.134] (**) RAPOO Rapoo 2.4G Wireless Device: (accel) acceleration threshold: 4
[     9.190] (II) event4  - RAPOO Rapoo 2.4G Wireless Device: is tagged by udev as: Mouse
[     9.191] (II) event4  - RAPOO Rapoo 2.4G Wireless Device: device is a pointer
[     9.192] (II) config/udev: Adding input device RAPOO Rapoo 2.4G Wireless Device (/dev/input/mouse0)
[     9.192] (II) No input driver specified, ignoring this device.
[     9.192] (II) This device may have been added with another device file.
[     9.193] (II) config/udev: Adding input device RAPOO Rapoo 2.4G Wireless Device (/dev/input/event5)
[     9.193] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "evdev keyboard catchall"
[     9.193] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "libinput keyboard catchall"
[     9.193] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "system-keyboard"
[     9.193] (II) Using input driver 'libinput' for 'RAPOO Rapoo 2.4G Wireless Device'
[     9.194] (**) RAPOO Rapoo 2.4G Wireless Device: always reports core events
[     9.194] (**) Option "Device" "/dev/input/event5"
[     9.194] (**) Option "_source" "server/udev"
[     9.195] (II) event5  - RAPOO Rapoo 2.4G Wireless Device: is tagged by udev as: Keyboard
[     9.195] (II) event5  - RAPOO Rapoo 2.4G Wireless Device: device is a keyboard
[     9.195] (II) event5  - RAPOO Rapoo 2.4G Wireless Device: device removed
[     9.219] (II) libinput: RAPOO Rapoo 2.4G Wireless Device: needs a virtual subdevice
[     9.219] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:24AE:2010.0002/input/input9/event5"
[     9.220] (II) XINPUT: Adding extended input device "RAPOO Rapoo 2.4G Wireless Device" (type: MOUSE, id 10)
[     9.220] (**) Option "AccelerationScheme" "none"
[     9.220] (**) RAPOO Rapoo 2.4G Wireless Device: (accel) selected scheme none/0
[     9.220] (**) RAPOO Rapoo 2.4G Wireless Device: (accel) acceleration factor: 2.000
[     9.220] (**) RAPOO Rapoo 2.4G Wireless Device: (accel) acceleration threshold: 4
[     9.221] (II) event5  - RAPOO Rapoo 2.4G Wireless Device: is tagged by udev as: Keyboard
[     9.221] (II) event5  - RAPOO Rapoo 2.4G Wireless Device: device is a keyboard
[     9.223] (II) config/udev: Adding input device RAPOO Rapoo 2.4G Wireless Device (/dev/input/event6)
[     9.223] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "evdev keyboard catchall"
[     9.223] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "libinput keyboard catchall"
[     9.223] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "system-keyboard"
[     9.223] (II) Using input driver 'libinput' for 'RAPOO Rapoo 2.4G Wireless Device'
[     9.223] (**) RAPOO Rapoo 2.4G Wireless Device: always reports core events
[     9.223] (**) Option "Device" "/dev/input/event6"
[     9.223] (**) Option "_source" "server/udev"
[     9.224] (II) event6  - RAPOO Rapoo 2.4G Wireless Device: is tagged by udev as: Keyboard
[     9.224] (II) event6  - RAPOO Rapoo 2.4G Wireless Device: device is a keyboard
[     9.224] (II) event6  - RAPOO Rapoo 2.4G Wireless Device: device removed
[     9.243] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:24AE:2010.0003/input/input10/event6"
[     9.243] (II) XINPUT: Adding extended input device "RAPOO Rapoo 2.4G Wireless Device" (type: KEYBOARD, id 11)
[     9.243] (WW) Option "xkb_model" requires a string value
[     9.243] (**) Option "xkb_layout" "de"
[     9.243] (**) Option "xkb_variant" ","
[     9.243] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     9.245] (II) event6  - RAPOO Rapoo 2.4G Wireless Device: is tagged by udev as: Keyboard
[     9.245] (II) event6  - RAPOO Rapoo 2.4G Wireless Device: device is a keyboard
[     9.246] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
[     9.246] (II) No input driver specified, ignoring this device.
[     9.246] (II) This device may have been added with another device file.
[     9.247] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[     9.247] (II) No input driver specified, ignoring this device.
[     9.247] (II) This device may have been added with another device file.
[     9.247] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event13)
[     9.247] (II) No input driver specified, ignoring this device.
[     9.247] (II) This device may have been added with another device file.
[     9.248] (II) config/udev: Adding input device HDA Intel PCH Dock Line Out (/dev/input/event14)
[     9.248] (II) No input driver specified, ignoring this device.
[     9.248] (II) This device may have been added with another device file.
[     9.248] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[     9.249] (II) No input driver specified, ignoring this device.
[     9.249] (II) This device may have been added with another device file.
[     9.249] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
[     9.249] (II) No input driver specified, ignoring this device.
[     9.249] (II) This device may have been added with another device file.
[     9.250] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event17)
[     9.250] (II) No input driver specified, ignoring this device.
[     9.250] (II) This device may have been added with another device file.
[     9.250] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event18)
[     9.250] (II) No input driver specified, ignoring this device.
[     9.250] (II) This device may have been added with another device file.
[     9.251] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     9.251] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[     9.251] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     9.251] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[     9.251] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     9.251] (**) AT Translated Set 2 keyboard: always reports core events
[     9.251] (**) Option "Device" "/dev/input/event3"
[     9.251] (**) Option "_source" "server/udev"
[     9.252] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     9.252] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     9.252] (II) event3  - AT Translated Set 2 keyboard: device removed
[     9.278] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     9.278] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 12)
[     9.278] (WW) Option "xkb_model" requires a string value
[     9.278] (**) Option "xkb_layout" "de"
[     9.278] (**) Option "xkb_variant" ","
[     9.278] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     9.280] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     9.280] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     9.281] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event19)
[     9.281] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[     9.281] (**) PS/2 Generic Mouse: Applying InputClass "libinput pointer catchall"
[     9.281] (II) Using input driver 'libinput' for 'PS/2 Generic Mouse'
[     9.281] (**) PS/2 Generic Mouse: always reports core events
[     9.281] (**) Option "Device" "/dev/input/event19"
[     9.281] (**) Option "_source" "server/udev"
[     9.282] (II) event19 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[     9.282] (II) event19 - PS/2 Generic Mouse: device is a pointer
[     9.282] (II) event19 - PS/2 Generic Mouse: device removed
[     9.333] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event19"
[     9.333] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 13)
[     9.333] (**) Option "AccelerationScheme" "none"
[     9.333] (**) PS/2 Generic Mouse: (accel) selected scheme none/0
[     9.334] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[     9.334] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[     9.335] (II) event19 - PS/2 Generic Mouse: is tagged by udev as: Mouse
[     9.335] (II) event19 - PS/2 Generic Mouse: device is a pointer
[     9.335] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[     9.335] (II) No input driver specified, ignoring this device.
[     9.336] (II) This device may have been added with another device file.
[     9.336] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event20)
[     9.336] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[     9.336] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "libinput touchpad catchall"
[     9.336] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[     9.336] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[     9.336] (II) LoadModule: "synaptics"
[     9.337] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     9.342] (II) Module synaptics: vendor="X.Org Foundation"
[     9.342] 	compiled for 1.19.0, module version = 1.9.0
[     9.342] 	Module class: X.Org XInput Driver
[     9.342] 	ABI class: X.Org XInput driver, version 24.1
[     9.342] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[     9.342] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.342] (**) Option "Device" "/dev/input/event20"
[     9.404] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[     9.404] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5728 (res 45)
[     9.404] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4916 (res 85)
[     9.404] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[     9.404] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[     9.404] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[     9.404] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[     9.404] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.404] (**) SynPS/2 Synaptics TouchPad: always reports core events
[     9.453] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio4/input/input26/event20"
[     9.453] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[     9.453] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[     9.453] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[     9.453] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.036
[     9.454] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[     9.454] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[     9.454] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[     9.454] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[     9.454] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[     9.455] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
[     9.455] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[     9.456] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/event8)
[     9.456] (II) No input driver specified, ignoring this device.
[     9.456] (II) This device may have been added with another device file.
[     9.456] (II) config/udev: Adding input device ST LIS3LV02DL Accelerometer (/dev/input/js0)
[     9.456] (II) No input driver specified, ignoring this device.
[     9.456] (II) This device may have been added with another device file.
[     9.457] (II) config/udev: Adding input device HP Wireless hotkeys (/dev/input/event7)
[     9.457] (**) HP Wireless hotkeys: Applying InputClass "evdev keyboard catchall"
[     9.457] (**) HP Wireless hotkeys: Applying InputClass "libinput keyboard catchall"
[     9.457] (**) HP Wireless hotkeys: Applying InputClass "system-keyboard"
[     9.457] (II) Using input driver 'libinput' for 'HP Wireless hotkeys'
[     9.457] (**) HP Wireless hotkeys: always reports core events
[     9.457] (**) Option "Device" "/dev/input/event7"
[     9.457] (**) Option "_source" "server/udev"
[     9.458] (II) event7  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[     9.458] (II) event7  - HP Wireless hotkeys: device is a keyboard
[     9.458] (II) event7  - HP Wireless hotkeys: device removed
[     9.517] (**) Option "config_info" "udev:/sys/devices/virtual/input/input11/event7"
[     9.517] (II) XINPUT: Adding extended input device "HP Wireless hotkeys" (type: KEYBOARD, id 15)
[     9.517] (WW) Option "xkb_model" requires a string value
[     9.517] (**) Option "xkb_layout" "de"
[     9.517] (**) Option "xkb_variant" ","
[     9.518] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     9.519] (II) event7  - HP Wireless hotkeys: is tagged by udev as: Keyboard
[     9.519] (II) event7  - HP Wireless hotkeys: device is a keyboard
[     9.520] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event10)
[     9.520] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[     9.520] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[     9.520] (**) HP WMI hotkeys: Applying InputClass "system-keyboard"
[     9.520] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[     9.520] (**) HP WMI hotkeys: always reports core events
[     9.520] (**) Option "Device" "/dev/input/event10"
[     9.520] (**) Option "_source" "server/udev"
[     9.521] (II) event10 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     9.521] (II) event10 - HP WMI hotkeys: device is a keyboard
[     9.521] (II) event10 - HP WMI hotkeys: device is a switch device
[     9.521] (II) event10 - HP WMI hotkeys: device removed
[     9.543] (**) Option "config_info" "udev:/sys/devices/virtual/input/input14/event10"
[     9.543] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 16)
[     9.543] (WW) Option "xkb_model" requires a string value
[     9.543] (**) Option "xkb_layout" "de"
[     9.543] (**) Option "xkb_variant" ","
[     9.543] (**) Option "xkb_options" "grp:alt_shift_toggle"
[     9.545] (II) event10 - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[     9.545] (II) event10 - HP WMI hotkeys: device is a keyboard
[     9.545] (II) event10 - HP WMI hotkeys: device is a switch device
[     9.579] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "evdev keyboard catchall"
[     9.579] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "libinput keyboard catchall"
[     9.579] (**) RAPOO Rapoo 2.4G Wireless Device: Applying InputClass "system-keyboard"
[     9.579] (II) Using input driver 'libinput' for 'RAPOO Rapoo 2.4G Wireless Device'
[     9.579] (**) RAPOO Rapoo 2.4G Wireless Device: always reports core events
[     9.579] (**) Option "Device" "/dev/input/event5"
[     9.579] (**) Option "_source" "_driver/libinput"
[     9.579] (II) libinput: RAPOO Rapoo 2.4G Wireless Device: is a virtual subdevice
[     9.579] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:24AE:2010.0002/input/input9/event5"
[     9.579] (II) XINPUT: Adding extended input device "RAPOO Rapoo 2.4G Wireless Device" (type: KEYBOARD, id 17)
[     9.579] (WW) Option "xkb_model" requires a string value
[     9.579] (**) Option "xkb_layout" "de"
[     9.579] (**) Option "xkb_variant" ","
[     9.579] (**) Option "xkb_options" "grp:alt_shift_toggle"
[    10.770] (II) intel(0): EDID vendor "LGD", prod id 774
[    10.770] (II) intel(0): Printing DDC gathered Modelines:
[    10.770] (II) intel(0): Modeline "1600x900"x0.0  121.20  1600 1760 1856 2158  900 903 908 936 -hsync -vsync (56.2 kHz eP)
[    10.770] (II) intel(0): Modeline "1600x900"x0.0   80.80  1600 1760 1856 2158  900 903 908 936 -hsync -vsync (37.4 kHz e)
[    13.384] (II) intel(0): resizing framebuffer to 2880x900
[    13.419] (II) intel(0): switch to mode 1280x800@59.9 on DP3 using pipe 1, position (1600, 0), rotation normal, reflection none

Do you see anything suspicious?

Edit: removed xf86-video-intel and installed xf86-video-vesa. No changes. Removed xf86-video-vesa, no changes again.

Last edited by Chino (2018-05-31 15:28:58)

Chino · 2018-06-02 08:15:57

Anyone? I'm kinda lost in this.

IrvineHimself · 2018-06-02 10:56:35

Did you try,as I suggested and downgrade the xorg-server:

sudo pacman -U  /var/cache/pacman/pkg/xorg-server-1.19.6+13+gd0d1a694f-2-x86_64.pkg.tar.xz

Currently, on these forums, there is at least 5 open threads that I know of, about how the latest version of xorg-server is broken with multiple monitors. That particular downgrade worked for me, but in the threads I have been following, people have been suggesting they also need to downgrade various other packages like xorg-server-common. I am speaking from memory here, so I may not have gotten that completely correct.

I am sorry that I am not being more helpful, but I have my own xrandr/xorg-server problems
Irvine

Chino · 2018-06-02 11:14:35

IrvineHimself wrote:

Did you try,as I suggested and downgrade the xorg-server:
sudo pacman -U  /var/cache/pacman/pkg/xorg-server-1.19.6+13+gd0d1a694f-2-x86_64.pkg.tar.xz

Yes, did this. Didn't change a thingbut the drm:intel-dp-train bug. Going crazy with this damn thing.

Last edited by Chino (2018-06-02 11:36:42)

seth · 2018-06-02 11:50:30

About the AMD chip: check whether it's disabled in UEFI/BIOS (there's absolutely no trace of it in your logs)

The link training is first and foremost a kernel thing, so try the vanilla and lts kernels (rather than the zen one)

Using the modesetting driver instead of xf86-video-intel should by no means end you w/ a black screen (and is worth a test itr), however your desktop environment might screw up because the output names might change (so it just disables all outputs)
=> disable your login manager and use "startx xterm" to start X11 along an xterm to investigate from there.

As a general advise: focus your efforts on one target each, ie. do not wildly change kernel, X11 driver and X11 session; get your DE out of the equation, remove xf86-video-intel (if this still fails, look up your Xorg long on whether the intel driver is somewhere enforced, thus fails in absence) and try the different kernels on this setup.

Chino · 2018-06-02 11:56:05

seth wrote:

About the AMD chip: check whether it's disabled in UEFI/BIOS (there's absolutely no trace of it in your logs)
The link training is first and foremost a kernel thing, so try the vanilla and lts kernels (rather than the zen one)
Using the modesetting driver instead of xf86-video-intel should by no means end you w/ a black screen (and is worth a test itr), however your desktop environment might screw up because the output names might change (so it just disables all outputs)
=> disable your login manager and use "startx xterm" to start X11 along an xterm to investigate from there.
As a general advise: focus your efforts on one target each, ie. do not wildly change kernel, X11 driver and X11 session; get your DE out of the equation, remove xf86-video-intel (if this still fails, look up your Xorg long on whether the intel driver is somewhere enforced, thus fails in absence) and try the different kernels on this setup.

Thanks for the reply. The AMD is off the table. Came out that my particular model only has the onboard intel card. Will try those things immediatelly.
Concerning the kernel: Tried running fom manjaro and Ubuntu on live system (which use linx-kernel and lts). That didn't work either.

Edit: What I still don't understand: Why does the VGA output work properly, while the DP doesn't?

Last edited by Chino (2018-06-02 12:40:25)

Chino · 2018-06-02 13:48:54

OK, since I am unable to update my bootloader after replacing the Kernel, I am quite pissed and give up for today. Never had such issues the last two years...
Using only modesetting (on zen) didn't give a video signal either. And also I didn't figured out, how to "disable" my WM and I'm not willing to remove my DE today.

Thanks so far.

Last edited by Chino (2018-06-02 13:49:16)

Chino · 2018-06-03 07:19:06

Good morning guys. After a bit more research in the evening, I found out that the only cases with symptoms similar to mine (no matter which Distro or even Windows) were due to broken graphics chips. Although I still don't understand why the VGA output isn't affected, I think that this might be the case for me, too. Even if I wasn't able to fullfill your advises (propably I'm just too dumb to properly use Arch and should go to something easier), I tried to get the Displayport to work on Manjaro, Ubuntu, Debain and OpenSuSe -- without any other situation than on Arch. Since a new mainboard will cost me at least 90€/ 105$/ 80£, which isn't worth the money for a machine that old, and I'm not willing to work on my PhD-thesis using a VGA signal, I will try to manage USB-to-HDMI output or find something to put in the existing expresscard54-Slot.

I'm sorry for having wasted your time and really appreaciate the efforts!
Regards from Germany!

EDIT: Finally managed to install linux-lts. Not working either.

Last edited by Chino (2018-06-03 15:18:56)

Chino · 2018-06-04 07:11:46

Since I found out that USB3-to-HDMI in Linux isn't p'n'p, I decided to give it one more try.
So: Linux-lts kernel, no xf86-video drivers, no lightdm

startx xterm

X.Org X Server 1.20.0
X Protocol Version 11, Revision =
Build Operating System: Linux Arch Linux
Current Operating System: Linux arch 4.14.47-1-lts #1 SMP Wed 30 21:09:23 UTC 2018 x86_64
Kernel command line: initrd=\initramfs-linux-lts.img root=path rw
Build Date: 25 May 2018 10:26.33PM

Current version of pixman:0.34.0
	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
Markers: (–) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown,
(==) Log file: „path“, time
(==) Using config directory: „path“
(==)Using system config directory: „path“ 
(II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
								The XKEYBOARD keymap compiler (xkbcomp) reports: > Internal error: Could not resolve keysym XF86WWAN > Internal error: Could not resolve keysym XF86RFKILL
Errors from xkbcomp are not fatal to X server

An then

waiting for X server to shut down.[30.715511] [drm:intel_dp_get_link_train_fallback_values [i915]] * ERROR* Link Training Unsuccessful

1. Does this mean a kernel issue?
2. What about the libva-intel-drivers, should I remove them as well?

seth · 2018-06-04 07:33:50

It means the i195 module fails to train the DP link - this could be a bug in the module (there have been), but since it fails on a variety of systems, i'd frankly first check the HW.
- Does the monitors hdmi input work?
- Does it work w/o converter? (You'll need a DP monitor for this, since it's a notbook, you might ask a friend or be allowed a test at some dealer, eg. telling them you consider to buy this monitor, but want to know whether it works on linux ;-)
- Does the converter work on windows? (Because if it works at all and is just bad design, it will still work on windows)

Chino · 2018-06-04 07:49:01

seth wrote:

Does the monitors hdmi input work?

It doesn't have a HDMI port. If it had, I wouldn't struggle so hard to get the DP working ;-)

seth wrote:

Does it work w/o converter? (You'll need a DP monitor for this, since it's a notbook, you might ask a friend or be allowed a test at some dealer, eg. telling them you consider to buy this monitor, but want to know whether it works on linux ;-)

That's a brilliant idea. In fact, I do have one Monitor with DP input here, but don't have a cable, and don't want to buy one since I don't know, if the HW works ;-)

seth wrote:

Does the converter work on windows? (Because if it works at all and is just bad design, it will still work on windows)

Also thought about that, but I don't have a second HDD around to install Windows and I won't mess around with my Linux Drive with dual boot.
Besides, I tried three different converters, which all showed the same issue.

I will go to the store in the afternoon and will check there. Thanks for the advise!

Chino · 2018-06-04 10:37:46

Ok, I found an old HDD which I installed Windows on. Interesting things happened:

1. passive DP->HDMI converter:
Monitor detected, but no Signal. Messing with frame rate I found, that there was a signal at 50Hz, but in wrong orientation and wrong colors.

2. Active DP->HDMI converter:
No Signal when in mirrored or extended Display orientation, same Signal as above when in Duplex or only integrated Display, but then also in false colors.

Same result for two different cables and monitors. So I think there are the following issue options:
1. broken graphics
2. graphics can't handle converted DP to HDMI
3. 1/2 plus i915 issue.

In the afternoon I will go to the store and check direct DP output.

seth · 2018-06-04 13:47:04

The HDMI "monitor" is probably a Tv?
I guess it will have a limited set of supported resolutions and rates and those don't make it through the EDID translation of any converter you've used.
If you can get the tech specs of that device, you could generate and add a matching modeline, https://wiki.archlinux.org/index.php/Xr … esolutions

Chino · 2018-06-04 15:47:11

seth wrote:

The HDMI "monitor" is probably a Tv?

No, it's a Samsung Syncmaster BX2331. I already used it with a notebook with an HDMI output without any issues right out of the box.
Right now I use it via VGA output of the notebook with the propably defect DP with 1920x1080 @ 60 Hz.

Chino · 2018-06-04 18:13:07

So I've been to the store. On each configuration (Win or Linux, DP-HDMI cable, DP-DP-cable) I got the same result: The only kind of signal I can produce is on 50 Hz and this is half the desired Desktop and it is reddish blurred. So I think my graphics is really damaged, which for me is some kind of worst case. So I guess, I have to try to get USB-to-HDMI working (somehow) or stick with VGA (and hate every day I'm worling with it). Man, I thought that machine was a nice shot...

Chino · 2018-06-05 13:09:54

Thread can be closed.

Arch Linux

#1 2018-05-19 07:08:14

[Solved]: DP/HDMI detected -- no video output

#2 2018-05-19 14:59:17

Re: [Solved]: DP/HDMI detected -- no video output

#3 2018-05-19 16:09:52

Re: [Solved]: DP/HDMI detected -- no video output

#4 2018-05-20 15:38:41

Re: [Solved]: DP/HDMI detected -- no video output

#5 2018-05-29 15:04:14

Re: [Solved]: DP/HDMI detected -- no video output

#6 2018-05-31 08:48:23

Re: [Solved]: DP/HDMI detected -- no video output

#7 2018-05-31 09:16:12

Re: [Solved]: DP/HDMI detected -- no video output

#8 2018-05-31 11:03:05

Re: [Solved]: DP/HDMI detected -- no video output

#9 2018-05-31 11:17:37

Re: [Solved]: DP/HDMI detected -- no video output

#10 2018-05-31 11:32:33

Re: [Solved]: DP/HDMI detected -- no video output

#11 2018-06-02 08:15:57

Re: [Solved]: DP/HDMI detected -- no video output

#12 2018-06-02 10:56:35

Re: [Solved]: DP/HDMI detected -- no video output

#13 2018-06-02 11:14:35

Re: [Solved]: DP/HDMI detected -- no video output

#14 2018-06-02 11:50:30

Re: [Solved]: DP/HDMI detected -- no video output

#15 2018-06-02 11:56:05

Re: [Solved]: DP/HDMI detected -- no video output

#16 2018-06-02 13:48:54

Re: [Solved]: DP/HDMI detected -- no video output

#17 2018-06-03 07:19:06

Re: [Solved]: DP/HDMI detected -- no video output

#18 2018-06-04 07:11:46

Re: [Solved]: DP/HDMI detected -- no video output

#19 2018-06-04 07:33:50

Re: [Solved]: DP/HDMI detected -- no video output

#20 2018-06-04 07:49:01

Re: [Solved]: DP/HDMI detected -- no video output

#21 2018-06-04 10:37:46

Re: [Solved]: DP/HDMI detected -- no video output

#22 2018-06-04 13:47:04

Re: [Solved]: DP/HDMI detected -- no video output

#23 2018-06-04 15:47:11

Re: [Solved]: DP/HDMI detected -- no video output

#24 2018-06-04 18:13:07

Re: [Solved]: DP/HDMI detected -- no video output

#25 2018-06-05 13:09:54

Re: [Solved]: DP/HDMI detected -- no video output

Board footer