You are not logged in.

Pages: 1

#1 2018-07-23 17:29:11

Marcel-
Member
From: Utrecht, NL
Registered: 2006-12-03
Posts: 266

[SOLVED] X crashes using DisplayPort on intel graphics card

I own an HP Elite 8300 SFF and until recently I used X using the VGA connector and a 1280x1024 monitor without issues. A few days ago I installed an Eizo Full HD monitor using the DisplayPort connector and every now and then X crashes when trying to wake up my system after it's gone to DPMS sleep mode, because the last write time to /var/log/Xorg.0.log is the moment I move the mouse and, after no effect, try to switch to the console using Ctrl-Alt-F3. Only after switching consoles a bit and restarting the monitor I get my screen back, but X is gone.

My Xorg.0.log looks like:

[117823.576] 
X.Org X Server 1.20.0
X Protocol Version 11, Revision 0
[117823.576] Build Operating System: Linux Arch Linux
[117823.576] Current Operating System: Linux elite 4.17.8-1-zen #1 ZEN SMP PREEMPT Wed Jul 18 09:56:17 UTC 2018 x86_64
[117823.576] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=/dev/sda3 rootflags=subvol=ROOT ipv6.disable=1 kdbus=1 rw video=1920x1080@60 init=/usr/lib/systemd/systemd quiet nohz=off
[117823.576] Build Date: 18 June 2018  03:12:37PM
[117823.576]  
[117823.576] Current version of pixman: 0.34.0
[117823.576] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[117823.576] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[117823.576] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 23 18:37:45 2018
[117823.576] (==) Using config directory: "/etc/X11/xorg.conf.d"
[117823.576] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[117823.577] (==) No Layout section.  Using the first Screen section.
[117823.577] (**) |-->Screen "Screen0" (0)
[117823.577] (**) |   |-->Monitor "Eizo Flexscan EV2450"
[117823.577] (**) |   |-->Device "Intel Graphics"
[117823.577] (==) Automatically adding devices
[117823.577] (==) Automatically enabling devices
[117823.577] (==) Automatically adding GPU devices
[117823.577] (==) Automatically binding GPU devices
[117823.577] (==) Max clients allowed: 256, resource mask: 0x1fffff
[117823.577] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[117823.577] 	Entry deleted from font path.
[117823.577] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[117823.577] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[117823.577] 	Entry deleted from font path.
[117823.577] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[117823.577] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF,
	/usr/share/fonts/Type1
[117823.577] (==) ModulePath set to "/usr/lib/xorg/modules"
[117823.577] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[117823.577] (II) Module ABI versions:
[117823.577] 	X.Org ANSI C Emulation: 0.4
[117823.577] 	X.Org Video Driver: 24.0
[117823.577] 	X.Org XInput driver : 24.1
[117823.577] 	X.Org Server Extension : 10.0
[117823.578] (++) using VT number 7

[117823.578] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[117823.579] (II) xfree86: Adding drm device (/dev/dri/card0)
[117823.580] (--) PCI:*(0@0:2:0) 8086:0152:103c:3397 rev 9, Mem @ 0xf7800000/4194304, 0xe0000000/268435456, I/O @ 0x0000f000/64, BIOS @ 0x????????/131072
[117823.581] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[117823.581] (II) LoadModule: "glx"
[117823.581] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[117823.582] (II) Module glx: vendor="X.Org Foundation"
[117823.582] 	compiled for 1.20.0, module version = 1.0.0
[117823.582] 	ABI class: X.Org Server Extension, version 10.0
[117823.582] (II) LoadModule: "intel"
[117823.582] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[117823.583] (II) Module intel: vendor="X.Org Foundation"
[117823.583] 	compiled for 1.20.0, module version = 2.99.917
[117823.583] 	Module class: X.Org Video Driver
[117823.583] 	ABI class: X.Org Video Driver, version 24.0
[117823.583] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[117823.583] (II) intel: Driver for Intel(R) HD Graphics
[117823.583] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[117823.583] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[117823.583] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180308
[117823.583] (II) intel(0): SNA compiled from 2.99.917-831-ge7bfc906
[117823.598] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 2500
[117823.598] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 4 threads
[117823.598] (II) intel(0): Creating default Display subsection in Screen section
	"Screen0" for depth/fbbpp 24/32
[117823.599] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[117823.599] (==) intel(0): RGB weight 888
[117823.599] (==) intel(0): Default visual is TrueColor
[117823.599] (**) intel(0): Option "AccelMethod" "sna"
[117823.599] (**) intel(0): Option "DRI" "3"
[117823.599] (**) intel(0): Option "TearFree" "true"
[117823.599] (II) intel(0): Output VGA1 using monitor section Eizo Flexscan EV2450
[117823.599] (II) intel(0): Enabled output VGA1
[117823.599] (II) intel(0): Output HDMI1 has no monitor section
[117823.599] (II) intel(0): Enabled output HDMI1
[117823.599] (II) intel(0): Output DP1 has no monitor section
[117823.600] (II) intel(0): Enabled output DP1
[117823.600] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[117823.600] (II) intel(0): Output VIRTUAL1 has no monitor section
[117823.600] (II) intel(0): Enabled output VIRTUAL1
[117823.600] (--) intel(0): Output DP1 using initial mode 1920x1080 on pipe 0
[117823.600] (**) intel(0): TearFree enabled
[117823.600] (**) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[117823.600] (==) intel(0): DPI set to (96, 96)
[117823.600] (II) Loading sub module "dri3"
[117823.600] (II) LoadModule: "dri3"
[117823.600] (II) Module "dri3" already built-in
[117823.600] (II) Loading sub module "dri2"
[117823.600] (II) LoadModule: "dri2"
[117823.600] (II) Module "dri2" already built-in
[117823.600] (II) Loading sub module "present"
[117823.600] (II) LoadModule: "present"
[117823.600] (II) Module "present" already built-in
[117823.600] (II) intel(0): SNA initialized with Ivybridge (gen7, gt1) backend
[117823.600] (==) intel(0): Backing store enabled
[117823.600] (==) intel(0): Silken mouse disabled
[117823.600] (II) intel(0): HW Cursor enabled
[117823.601] (==) intel(0): DPMS enabled
[117823.601] (==) intel(0): Display hotplug detection enabled
[117823.601] (II) intel(0): [DRI2] Setup complete
[117823.601] (II) intel(0): [DRI2]   DRI driver: i965
[117823.601] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[117823.601] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[117823.601] (II) intel(0): hardware support for Present enabled
[117823.601] (WW) intel(0): Option "Monitor-DisplayPort-1" is not used
[117823.601] (WW) intel(0): Option "DPI" is not used
[117823.601] (II) Initializing extension Generic Event Extension
[117823.601] (II) Initializing extension SHAPE
[117823.601] (II) Initializing extension MIT-SHM
[117823.601] (II) Initializing extension XInputExtension
[117823.602] (II) Initializing extension XTEST
[117823.602] (II) Initializing extension BIG-REQUESTS
[117823.602] (II) Initializing extension SYNC
[117823.602] (II) Initializing extension XKEYBOARD
[117823.602] (II) Initializing extension XC-MISC
[117823.602] (II) Initializing extension SECURITY
[117823.603] (II) Initializing extension XFIXES
[117823.603] (II) Initializing extension RENDER
[117823.603] (II) Initializing extension RANDR
[117823.603] (II) Initializing extension COMPOSITE
[117823.603] (II) Initializing extension DAMAGE
[117823.604] (II) Initializing extension MIT-SCREEN-SAVER
[117823.604] (II) Initializing extension DOUBLE-BUFFER
[117823.604] (II) Initializing extension RECORD
[117823.604] (II) Initializing extension DPMS
[117823.604] (II) Initializing extension Present
[117823.604] (II) Initializing extension DRI3
[117823.605] (II) Initializing extension X-Resource
[117823.605] (II) Initializing extension XVideo
[117823.605] (II) Initializing extension XVideo-MotionCompensation
[117823.605] (II) Initializing extension GLX
[117823.615] (II) AIGLX: Loaded and initialized i965
[117823.615] (II) GLX: Initialized DRI2 GL provider for screen 0
[117823.615] (II) Initializing extension XFree86-VidModeExtension
[117823.615] (II) Initializing extension XFree86-DGA
[117823.615] (II) Initializing extension XFree86-DRI
[117823.615] (II) Initializing extension DRI2
[117823.617] (II) intel(0): switch to mode 1920x1080@60.0 on DP1 using pipe 0, position (0, 0), rotation normal, reflection none
[117823.633] (II) intel(0): Setting screen physical size to 508 x 285
[117823.685] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[117823.685] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[117823.685] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[117823.685] (II) LoadModule: "libinput"
[117823.685] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[117823.687] (II) Module libinput: vendor="X.Org Foundation"
[117823.687] 	compiled for 1.20.0, module version = 0.28.0
[117823.687] 	Module class: X.Org XInput Driver
[117823.687] 	ABI class: X.Org XInput driver, version 24.1
[117823.687] (II) Using input driver 'libinput' for 'Power Button'
[117823.687] (**) Power Button: always reports core events
[117823.687] (**) Option "Device" "/dev/input/event1"
[117823.687] (**) Option "_source" "server/udev"
[117823.687] (II) event1  - Power Button: is tagged by udev as: Keyboard
[117823.687] (II) event1  - Power Button: device is a keyboard
[117823.687] (II) event1  - Power Button: device removed
[117823.701] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[117823.701] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[117823.702] (II) event1  - Power Button: is tagged by udev as: Keyboard
[117823.702] (II) event1  - Power Button: device is a keyboard
[117823.703] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[117823.703] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[117823.703] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[117823.703] (II) Using input driver 'libinput' for 'Power Button'
[117823.703] (**) Power Button: always reports core events
[117823.703] (**) Option "Device" "/dev/input/event0"
[117823.703] (**) Option "_source" "server/udev"
[117823.703] (II) event0  - Power Button: is tagged by udev as: Keyboard
[117823.703] (II) event0  - Power Button: device is a keyboard
[117823.703] (II) event0  - Power Button: device removed
[117823.714] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0/event0"
[117823.715] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[117823.715] (II) event0  - Power Button: is tagged by udev as: Keyboard
[117823.715] (II) event0  - Power Button: device is a keyboard
[117823.716] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/event2)
[117823.716] (**) USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[117823.716] (**) USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[117823.717] (II) Using input driver 'libinput' for 'USB Optical Mouse'
[117823.717] (**) USB Optical Mouse: always reports core events
[117823.717] (**) Option "Device" "/dev/input/event2"
[117823.717] (**) Option "_source" "server/udev"
[117823.772] (II) event2  - USB Optical Mouse: is tagged by udev as: Mouse
[117823.772] (II) event2  - USB Optical Mouse: device is a pointer
[117823.772] (II) event2  - USB Optical Mouse: device removed
[117823.808] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-2/1-2:1.0/0003:1BCF:0005.0001/input/input4/event2"
[117823.808] (II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE, id 8)
[117823.808] (**) Option "AccelerationScheme" "none"
[117823.808] (**) USB Optical Mouse: (accel) selected scheme none/0
[117823.808] (**) USB Optical Mouse: (accel) acceleration factor: 2.000
[117823.808] (**) USB Optical Mouse: (accel) acceleration threshold: 4
[117823.865] (II) event2  - USB Optical Mouse: is tagged by udev as: Mouse
[117823.865] (II) event2  - USB Optical Mouse: device is a pointer
[117823.866] (II) config/udev: Adding input device USB Optical Mouse (/dev/input/mouse0)
[117823.866] (II) No input driver specified, ignoring this device.
[117823.866] (II) This device may have been added with another device file.
[117823.867] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event3)
[117823.867] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[117823.867] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[117823.867] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[117823.867] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[117823.867] (**) Option "Device" "/dev/input/event3"
[117823.867] (**) Option "_source" "server/udev"
[117823.868] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[117823.868] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[117823.868] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[117823.878] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.0/0003:045E:00DB.0002/input/input5/event3"
[117823.878] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: KEYBOARD, id 9)
[117823.879] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[117823.879] (II) event3  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[117823.880] (II) config/udev: Adding input device Microsoft Natural® Ergonomic Keyboard 4000 (/dev/input/event4)
[117823.880] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "evdev keyboard catchall"
[117823.880] (**) Microsoft Natural® Ergonomic Keyboard 4000: Applying InputClass "libinput keyboard catchall"
[117823.880] (II) Using input driver 'libinput' for 'Microsoft Natural® Ergonomic Keyboard 4000'
[117823.880] (**) Microsoft Natural® Ergonomic Keyboard 4000: always reports core events
[117823.880] (**) Option "Device" "/dev/input/event4"
[117823.880] (**) Option "_source" "server/udev"
[117823.881] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[117823.881] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[117823.881] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device removed
[117823.891] (II) libinput: Microsoft Natural® Ergonomic Keyboard 4000: needs a virtual subdevice
[117823.891] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-3/1-3:1.1/0003:045E:00DB.0003/input/input6/event4"
[117823.891] (II) XINPUT: Adding extended input device "Microsoft Natural® Ergonomic Keyboard 4000" (type: MOUSE, id 10)
[117823.891] (**) Option "AccelerationScheme" "none"
[117823.891] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) selected scheme none/0
[117823.891] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration factor: 2.000
[117823.891] (**) Microsoft Natural® Ergonomic Keyboard 4000: (accel) acceleration threshold: 4
[117823.892] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: is tagged by udev as: Keyboard
[117823.892] (II) event4  - Microsoft Natural® Ergonomic Keyboard 4000: device is a keyboard
[117823.892] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[117823.892] (II) No input driver specified, ignoring this device.
[117823.892] (II) This device may have been added with another device file.
[117823.892] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[117823.892] (II) No input driver specified, ignoring this device.
[117823.892] (II) This device may have been added with another device file.
[117823.892] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event9)
[117823.892] (II) No input driver specified, ignoring this device.
[117823.892] (II) This device may have been added with another device file.
[117823.899] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event10)
[117823.899] (II) No input driver specified, ignoring this device.
[117823.899] (II) This device may have been added with another device file.
[117823.899] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event11)
[117823.899] (II) No input driver specified, ignoring this device.
[117823.899] (II) This device may have been added with another device file.
[117823.900] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event12)
[117823.900] (II) No input driver specified, ignoring this device.
[117823.900] (II) This device may have been added with another device file.
[117823.900] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[117823.900] (II) No input driver specified, ignoring this device.
[117823.900] (II) This device may have been added with another device file.
[117823.901] (II) config/udev: Adding input device HP WMI hotkeys (/dev/input/event6)
[117823.901] (**) HP WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[117823.901] (**) HP WMI hotkeys: Applying InputClass "libinput keyboard catchall"
[117823.901] (II) Using input driver 'libinput' for 'HP WMI hotkeys'
[117823.901] (**) HP WMI hotkeys: always reports core events
[117823.901] (**) Option "Device" "/dev/input/event6"
[117823.901] (**) Option "_source" "server/udev"
[117823.901] (II) event6  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[117823.901] (II) event6  - HP WMI hotkeys: device is a keyboard
[117823.901] (II) event6  - HP WMI hotkeys: device removed
[117823.928] (**) Option "config_info" "udev:/sys/devices/virtual/input/input9/event6"
[117823.928] (II) XINPUT: Adding extended input device "HP WMI hotkeys" (type: KEYBOARD, id 11)
[117823.929] (II) event6  - HP WMI hotkeys: is tagged by udev as: Keyboard Switch
[117823.929] (II) event6  - HP WMI hotkeys: device is a keyboard
[117823.940] (EE) intel(0): failed to set mode: Invalid argument [22]
[117823.940] (EE) 
[117823.940] (EE) Backtrace:
[117823.940] (EE) 0: /usr/lib/Xorg (xorg_backtrace+0x4d) [0x5612276d1c2d]
[117823.940] (EE) 1: /usr/lib/Xorg (0x561227548000+0x189d69) [0x5612276d1d69]
[117823.940] (EE) 2: /usr/lib/libc.so.6 (0x7f1bbf93f000+0x368f0) [0x7f1bbf9758f0]
[117823.940] (EE) 3: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1bb8f8e000+0x690df) [0x7f1bb8ff70df]
[117823.940] (EE) 4: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1bb8f8e000+0x6c2bd) [0x7f1bb8ffa2bd]
[117823.940] (EE) 5: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1bb8f8e000+0x729f7) [0x7f1bb90009f7]
[117823.940] (EE) 6: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1bb8f8e000+0x73aab) [0x7f1bb9001aab]
[117823.940] (EE) 7: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1bb8f8e000+0x7440d) [0x7f1bb900240d]
[117823.940] (EE) 8: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1bb8f8e000+0x78442) [0x7f1bb9006442]
[117823.940] (EE) 9: /usr/lib/xorg/modules/drivers/intel_drv.so (0x7f1bb8f8e000+0x78899) [0x7f1bb9006899]
[117823.941] (EE) 10: /usr/lib/Xorg (dixSaveScreens+0xe3) [0x5612276413b3]
[117823.941] (EE) 11: /usr/lib/Xorg (0x561227548000+0x376f9) [0x56122757f6f9]
[117823.941] (EE) 12: /usr/lib/libc.so.6 (__libc_start_main+0xeb) [0x7f1bbf96206b]
[117823.941] (EE) 13: /usr/lib/Xorg (_start+0x2a) [0x56122758022a]
[117823.941] (EE) 
[117823.941] (EE) Segmentation fault at address 0x88
[117823.941] (EE) 
Fatal server error:
[117823.941] (EE) Caught signal 11 (Segmentation fault). Server aborting
[117823.941] (EE) 
[117823.941] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[117823.941] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[117823.941] (EE) 
[117823.941] (II) AIGLX: Suspending AIGLX clients for VT switch
[117823.945] (EE) Server terminated with error (1). Closing log file.

The output of xrandr --verbose is

Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 32767 x 32767
DP1 connected primary 1920x1080+0+0 (0x48) normal (normal left inverted right x axis y axis) 530mm x 300mm
	Identifier: 0x43
	Timestamp:  8218
	Subpixel:   unknown
	Gamma:      1.0:1.0:1.0
	Brightness: 1.0
	Clones:    
	CRTC:       0
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	EDID: 
		00ffffffffffff0015c3302501010101
		101c0104a5351e78fa7e75a755529c27
		0f5054a108008180b300a9c081c08100
		010101010101023a801871382d40582c
		450010292100001e000000ff00363939
		35353034380a20202020000000fd003b
		3d1f440f000a202020202020000000fc
		004556323435300a20202020202001b5
		020312f145900403020123091f078301
		0000023a801871382d40582c45001029
		2100001e011d007251d01e206e285500
		10292100001e8f0ad08a20e02d10103e
		9600dc29110000188c0ad08a20e02d10
		103e96008c2911000018d50980a020e0
		2d101060a2008c291100001800000000
		0000000000000000000000000000006a
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
  1920x1080 (0x48) 148.500MHz +HSync +VSync *current +preferred
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  67.50KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  60.00Hz
  1920x1080 (0x120) 148.352MHz +HSync +VSync
        h: width  1920 start 2008 end 2052 total 2200 skew    0 clock  67.43KHz
        v: height 1080 start 1084 end 1089 total 1125           clock  59.94Hz
  1680x1050 (0x121) 146.250MHz -HSync +VSync
        h: width  1680 start 1784 end 1960 total 2240 skew    0 clock  65.29KHz
        v: height 1050 start 1053 end 1059 total 1089           clock  59.95Hz
  1600x900 (0x122) 108.000MHz +HSync +VSync
        h: width  1600 start 1624 end 1704 total 1800 skew    0 clock  60.00KHz
        v: height  900 start  901 end  904 total 1000           clock  60.00Hz
  1280x1024 (0x123) 108.000MHz +HSync +VSync
        h: width  1280 start 1328 end 1440 total 1688 skew    0 clock  63.98KHz
        v: height 1024 start 1025 end 1028 total 1066           clock  60.02Hz
  1280x800 (0x124) 83.500MHz -HSync +VSync
        h: width  1280 start 1352 end 1480 total 1680 skew    0 clock  49.70KHz
        v: height  800 start  803 end  809 total  831           clock  59.81Hz
  1280x720 (0x125) 74.250MHz +HSync +VSync
        h: width  1280 start 1390 end 1430 total 1650 skew    0 clock  45.00KHz
        v: height  720 start  725 end  730 total  750           clock  60.00Hz
  1280x720 (0x126) 74.176MHz +HSync +VSync
        h: width  1280 start 1390 end 1430 total 1650 skew    0 clock  44.96KHz
        v: height  720 start  725 end  730 total  750           clock  59.94Hz
  1024x768 (0x127) 65.000MHz -HSync -VSync
        h: width  1024 start 1048 end 1184 total 1344 skew    0 clock  48.36KHz
        v: height  768 start  771 end  777 total  806           clock  60.00Hz
  800x600 (0x128) 40.000MHz +HSync +VSync
        h: width   800 start  840 end  968 total 1056 skew    0 clock  37.88KHz
        v: height  600 start  601 end  605 total  628           clock  60.32Hz
  720x480 (0x129) 27.027MHz -HSync -VSync
        h: width   720 start  736 end  798 total  858 skew    0 clock  31.50KHz
        v: height  480 start  489 end  495 total  525           clock  60.00Hz
  720x480 (0x12a) 27.000MHz -HSync -VSync
        h: width   720 start  736 end  798 total  858 skew    0 clock  31.47KHz
        v: height  480 start  489 end  495 total  525           clock  59.94Hz
  640x480 (0x12b) 25.200MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.50KHz
        v: height  480 start  490 end  492 total  525           clock  60.00Hz
  640x480 (0x12c) 25.175MHz -HSync -VSync
        h: width   640 start  656 end  752 total  800 skew    0 clock  31.47KHz
        v: height  480 start  490 end  492 total  525           clock  59.94Hz
  720x400 (0x12d) 28.320MHz -HSync +VSync
        h: width   720 start  738 end  846 total  900 skew    0 clock  31.47KHz
        v: height  400 start  412 end  414 total  449           clock  70.08Hz
HDMI1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x44
	Timestamp:  8218
	Subpixel:   unknown
	Clones:     VGA1
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	aspect ratio: Automatic 
		supported: Automatic, 4:3, 16:9
	Broadcast RGB: Automatic 
		supported: Automatic, Full, Limited 16:235
	audio: auto 
		supported: force-dvi, off, auto, on
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
VGA1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x45
	Timestamp:  8218
	Subpixel:   unknown
	Clones:     HDMI1
	CRTCs:      0 1 2
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	link-status: Good 
		supported: Good, Bad
	non-desktop: 0 
		range: (0, 1)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
	Identifier: 0x46
	Timestamp:  8218
	Subpixel:   no subpixels
	Clones:    
	CRTCs:      3
	Transform:  1.000000 0.000000 0.000000
	            0.000000 1.000000 0.000000
	            0.000000 0.000000 1.000000
	           filter: 
	non-desktop: 0 
		supported: 0, 1

10-monitor.conf looks like

Section "Monitor"
    Identifier    "Eizo Flexscan EV2450"
    Option        "DPI" "93 x 93"
    VertRefresh   55-65
    Gamma         1.0
EndSection

Section "Device"
    Identifier    "Intel Graphics"
    Driver        "intel"
    Option        "DRI" "3"
    Option        "AccelMethod" "sna"
    Option        "TearFree" "true"
    Option        "Monitor-DisplayPort-1" "Eizo Flexscan EV2450"
EndSection

Section "Screen"
    Identifier    "Screen0"
    Device        "Intel Graphics"
    Monitor       "Eizo Flexscan EV2450"
EndSection

Last edited by Marcel- (2018-08-05 14:56:23)

Offline

#2 2018-07-23 18:37:52

seth
Member
Registered: 2012-09-03
Posts: 51,017

Re: [SOLVED] X crashes using DisplayPort on intel graphics card

Try using the modesetting driver, the intel driver is deprecated anyway.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#3 2018-07-23 23:28:56

Marcel-
Member
From: Utrecht, NL
Registered: 2006-12-03
Posts: 266

Re: [SOLVED] X crashes using DisplayPort on intel graphics card

I will try, but why is the intel driver deprecated? Using modesetting I lose several features like hardware encoding, which makes converting video using ffmpeg terribly slow.

Offline

#4 2018-07-24 00:20:30

Marcel-
Member
From: Utrecht, NL
Registered: 2006-12-03
Posts: 266

Re: [SOLVED] X crashes using DisplayPort on intel graphics card

I retract my comment about slow encoding, apparently ffmpeg still uses libva-intel-driver and encodes at normal speed.

Offline

#5 2018-07-24 07:06:50

seth
Member
Registered: 2012-09-03
Posts: 51,017

Re: [SOLVED] X crashes using DisplayPort on intel graphics card

I'll shamelessly link the gentoo wiki for quotes, https://wiki.gentoo.org/wiki/Intel#Intel_DDX but statements and incidents are all over the web and mailing lists.
The reason is (most likely) wayland, so the workload is being moved into the kernel modules.

How to upload text · How to boot w/o GUI · Disable Windows Fast-Start! · Fix your xinitrc

Offline

#6 2018-07-24 09:58:57

Marcel-
Member
From: Utrecht, NL
Registered: 2006-12-03
Posts: 266

Re: [SOLVED] X crashes using DisplayPort on intel graphics card

Thanks for the link. I'll try modesetting for a week or so and if I don't get anymore crashes, I'll mark this topic solved.

Offline

#7 2018-08-05 14:56:40

Marcel-
Member
From: Utrecht, NL
Registered: 2006-12-03
Posts: 266

Re: [SOLVED] X crashes using DisplayPort on intel graphics card

It is sometimes difficult to wake up the monitor when the system fell asleep, but at least the X server doesn't crash anymore. Thanks!

Offline

Pages: 1

Board footer

Powered by FluxBB