You are not logged in.
Pages: 1
Hi. I am on zen kernel and it detects the bluetooth hardware:
~ dmesg | grep -i blue
[ 4.564125] Bluetooth: Core ver 2.22
[ 4.564159] Bluetooth: HCI device and connection manager initialized
[ 4.564164] Bluetooth: HCI socket layer initialized
[ 4.564167] Bluetooth: L2CAP socket layer initialized
[ 4.564175] Bluetooth: SCO socket layer initialized
[ 4.634803] Bluetooth: hci0: read Intel version: 370810011003110e32
[ 4.634805] Bluetooth: hci0: Intel device is already patched. patch num: 32
~ rfkill
ID TYPE DEVICE SOFT HARD
0 bluetooth hci0 unblocked unblocked
1 wlan phy0 unblocked unblocked
~ sudo lshw
...
*-usb:1
description: Bluetooth wireless interface
vendor: Intel Corp.
physical id: 7
bus info: usb@1:7
version: 0.01
capabilities: bluetooth usb-2.00
configuration: driver=btusb maxpower=100mA speed=12Mbit/s
... I think I've also installed all the needed software:
bluedevil 1:5.14.3-1
blueman 2.0.6-1
bluez 5.50-3
bluez-firmware 1.2-9
bluez-hid2hci 5.50-3
bluez-qt 5.52.0-1
bluez-utils 5.50-3Nonetheless I cannot make it work under Plasma/KDE.
The settings say there's no adapter.
Any idea?
TIA.
Last edited by 0BADC0DE (2018-11-27 18:00:04)
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
Cancel me not -- for what then shall remain?
Abscissas, some mantissas, modules, modes, A root or two, a torus and a node:
The inverse of my verse, a null domain.
-- Stanislaw Lem, The Cyberiad
Offline
I read that wiki page, especially the troubleshooting section.
But got no help at all:
This article or section is out of date.
Reason: Replace hciconfig with newer commands.
So I have tried with those tools that are available.
For example, blueman-adapters simply fails as
[support@Newton ~] blueman-adapters
/usr/bin/blueman-adapters:10: PyGIWarning: Pango was imported without specifying a version first. Use gi.require_version('Pango', '1.0') before import to ensure that the right version gets loaded.
from gi.repository import Pango
blueman-adapters version 2.0.6 starting
ERROR:dbus.proxies:Introspect error on org.blueman.Applet:/: dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message recipient disconnected from message bus without replying
Traceback (most recent call last):
File "/usr/bin/blueman-adapters", line 241, in <module>
BluemanAdapters(adapter_name)
File "/usr/bin/blueman-adapters", line 49, in __init__
check_bluetooth_status(_("Bluetooth needs to be turned on for the adapter manager to work"), lambda: exit())
File "/usr/lib/python3.7/site-packages/blueman/Functions.py", line 92, in check_bluetooth_status
if "PowerManager" in applet.QueryPlugins():
File "/usr/lib/python3.7/site-packages/dbus/proxies.py", line 70, in __call__
return self._proxy_method(*args, **keywords)
File "/usr/lib/python3.7/site-packages/dbus/proxies.py", line 145, in __call__
**keywords)
File "/usr/lib/python3.7/site-packages/dbus/connection.py", line 651, in call_blocking
message, timeout)
dbus.exceptions.DBusException: org.freedesktop.DBus.Error.NoReply: Message recipient disconnected from message bus without replyingThen I've installed bluez-hciconfig from the AUR and I've just cont a confirmation that the hardware is there:
~ hciconfig hci0
hci0: Type: Primary Bus: USB
BD Address: 68:EC:C5:D8:B9:DF ACL MTU: 1021:5 SCO MTU: 96:6
UP RUNNING
RX bytes:2799 acl:0 sco:0 events:264 errors:0
TX bytes:39182 acl:0 sco:0 commands:263 errors:0
~ hciconfig hci0 features
hci0: Type: Primary Bus: USB
BD Address: 68:EC:C5:D8:B9:DF ACL MTU: 1021:5 SCO MTU: 96:6
Features page 0: 0xff 0xfe 0x0f 0xfe 0xdb 0xff 0x7b 0x87
<3-slot packets> <5-slot packets> <encryption> <slot offset>
<timing accuracy> <role switch> <hold mode> <sniff mode>
<RSSI> <channel quality> <SCO link> <HV2 packets>
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme>
<power control> <transparent SCO> <EDR ACL 2 Mbps>
<EDR ACL 3 Mbps> <enhanced iscan> <interlaced iscan>
<interlaced pscan> <inquiry with RSSI> <extended SCO>
<EV4 packets> <EV5 packets> <AFH cap. slave>
<AFH class. slave> <LE support> <3-slot EDR ACL>
<5-slot EDR ACL> <sniff subrating> <pause encryption>
<AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps>
<EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended inquiry>
<LE and BR/EDR> <simple pairing> <encapsulated PDU>
<err. data report> <non-flush flag> <LSTO> <inquiry TX power>
<EPC> <extended features>
Features page 1: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00But I cannot make it work with Plasma/KDE: settings stil lsay there's no adapter at all, despite the Bluetooth service is running.
I have another Archlinux box with a USB bluetooth adapter and it works like a charm!
I suspect is something related to this specific hardware but have really no idea on where to start to troubleshoot.
Last edited by 0BADC0DE (2018-11-27 18:31:10)
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
yea then you will need to give some info about the adapter, be verbose
Cancel me not -- for what then shall remain?
Abscissas, some mantissas, modules, modes, A root or two, a torus and a node:
The inverse of my verse, a null domain.
-- Stanislaw Lem, The Cyberiad
Offline
~ sudo lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 004: ID 058f:5608 Alcor Micro Corp. # <-- this is the laptop webcam
Bus 001 Device 003: ID 8087:0a2a Intel Corp. # <-- this is the bluetooth adapter
Bus 001 Device 002: ID 0bda:0129 Realtek Semiconductor Corp. RTS5129 Card Reader Controller
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
~ sudo lsusb -v -s 001:003
Bus 001 Device 003: ID 8087:0a2a Intel Corp.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 224 Wireless
bDeviceSubClass 1 Radio Frequency
bDeviceProtocol 1 Bluetooth
bMaxPacketSize0 64
idVendor 0x8087 Intel Corp.
idProduct 0x0a2a
bcdDevice 0.01
iManufacturer 0
iProduct 0
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 0x00b1
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0000 1x 0 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 1
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0009 1x 9 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 2
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0011 1x 17 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 3
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0019 1x 25 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 4
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0021 1x 33 bytes
bInterval 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 5
bNumEndpoints 2
bInterfaceClass 224 Wireless
bInterfaceSubClass 1 Radio Frequency
bInterfaceProtocol 1 Bluetooth
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 1
Transfer Type Isochronous
Synch Type None
Usage Type Data
wMaxPacketSize 0x0031 1x 49 bytes
bInterval 1
Device Status: 0x0001
Self PoweredWhat else can be of some help?
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
I think I've also installed all the needed software:
bluedevil 1:5.14.3-1 blueman 2.0.6-1 bluez 5.50-3 bluez-firmware 1.2-9 bluez-hid2hci 5.50-3 bluez-qt 5.52.0-1 bluez-utils 5.50-3
pulseaudio-bluetooth ?
Offline
0BADC0DE wrote:I think I've also installed all the needed software:
bluedevil 1:5.14.3-1 blueman 2.0.6-1 bluez 5.50-3 bluez-firmware 1.2-9 bluez-hid2hci 5.50-3 bluez-qt 5.52.0-1 bluez-utils 5.50-3pulseaudio-bluetooth ?
It's not installed in my box.
But I don't think it will "unlock" my situation. I'll try later though.
[UPDATE] Installing that package doesn't change anything, though.
Last edited by 0BADC0DE (2018-11-28 14:00:38)
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
Should I report this issue to the linux-bluetooth mailing list, or is it too "dev" for such an issue?
Any hint?
Maybe Computers Will Never Become As Intelligent
As Humans. Surely They Won't Ever Become So Stupid.
Offline
Pages: 1