xrandr broker after update

Hannibal · 2019-01-11 15:22:19

Good afternoon,
I updated my system today after a couple of month. Now xrandr seems to be broken. Any command lead to the following:

xrandr -q
xrandr: output eDP1 cannot use rotation "normal" reflection "none"

==========================
xrandr program version 1.5.0
Server reports RandR version 1.5

4.20.0-arch1-1-ARCH + I3

Any suggestion how to fix this?
Thanks!!

Last edited by Hannibal (2019-01-14 23:19:00)

seth · 2019-01-11 15:58:12

Try

xrandr --output eDP1 --reflect normal --rotate normal

Hannibal · 2019-01-12 23:53:42

Hey,
I tried that, but I just get:

X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 21 (RRSetCrtcConfig)
Serial number of failed request: 40
Current serial number in output stream: 40

seth · 2019-01-13 09:00:31

Please post your xorg log, dmesg and try the lts kernel.

Hannibal · 2019-01-13 11:51:46

Hey,
here are my outputs:

dmesg:

[    0.000000] Linux version 4.20.0-arch1-1-ARCH (builduser@heftig-29859) (gcc version 8.2.1 20181127 (GCC)) #1 SMP PREEMPT Mon Dec 24 03:00:40 UTC 2018
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=14000a61-ed45-4b51-a48e-1153ec97851b rw quiet
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009cfff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009d000-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000010000000-0x000000001000afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000001000b000-0x00000000bf063fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bf064000-0x00000000ccbfefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ccbff000-0x00000000ccd7efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000ccd7f000-0x00000000ccdfefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000ccdff000-0x00000000cfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ffa00000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000022dffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.7 present.
[    0.000000] DMI: LENOVO 20CLS2A10L/20CLS2A10L, BIOS N10ET54W (1.33 ) 09/18/2018
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2294.782 MHz processor
[    0.006701] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.006706] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.006725] last_pfn = 0x22e000 max_arch_pfn = 0x400000000
[    0.006736] MTRR default type: write-back
[    0.006738] MTRR fixed ranges enabled:
[    0.006741]   00000-9FFFF write-back
[    0.006743]   A0000-BFFFF uncachable
[    0.006746]   C0000-FFFFF write-protect
[    0.006748] MTRR variable ranges enabled:
[    0.006752]   0 base 00E0000000 mask 7FF0000000 uncachable
[    0.006755]   1 base 00D0000000 mask 7FF0000000 uncachable
[    0.006757]   2 base 00CE000000 mask 7FFE000000 uncachable
[    0.006760]   3 base 00CD000000 mask 7FFF000000 uncachable
[    0.006762]   4 base 00CCE00000 mask 7FFFE00000 uncachable
[    0.006764]   5 base 00F0000000 mask 7FF0000000 uncachable
[    0.006766]   6 disabled
[    0.006767]   7 disabled
[    0.006769]   8 disabled
[    0.006770]   9 disabled
[    0.008942] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.009335] last_pfn = 0xbf064 max_arch_pfn = 0x400000000
[    0.009638] found SMP MP-table at [mem 0x000f0100-0x000f010f] mapped at [(____ptrval____)]
[    0.009786] check: Scanning 1 areas for low memory corruption
[    0.009792] Base memory trampoline at [(____ptrval____)] 97000 size 24576
[    0.009799] Using GB pages for direct mapping
[    0.009804] BRK [0x95201000, 0x95201fff] PGTABLE
[    0.009809] BRK [0x95202000, 0x95202fff] PGTABLE
[    0.009812] BRK [0x95203000, 0x95203fff] PGTABLE
[    0.009892] BRK [0x95204000, 0x95204fff] PGTABLE
[    0.009898] BRK [0x95205000, 0x95205fff] PGTABLE
[    0.010599] RAMDISK: [mem 0x370eb000-0x3786cfff]
[    0.010608] ACPI: Early table checksum verification disabled
[    0.010745] ACPI: RSDP 0x00000000000F0120 000024 (v02 LENOVO)
[    0.010754] ACPI: XSDT 0x00000000CCDFE1C0 0000EC (v01 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010767] ACPI: FACP 0x00000000CCDF9000 00010C (v05 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010781] ACPI: DSDT 0x00000000CCDE4000 010E78 (v02 LENOVO TP-N10   00001330 INTL 20120711)
[    0.010790] ACPI: FACS 0x00000000CCD68000 000040
[    0.010797] ACPI: ASF! 0x00000000CCDFD000 0000A5 (v32 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010804] ACPI: HPET 0x00000000CCDFC000 000038 (v01 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010812] ACPI: ECDT 0x00000000CCDFB000 000052 (v01 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010819] ACPI: APIC 0x00000000CCDF8000 000098 (v01 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010826] ACPI: MCFG 0x00000000CCDF7000 00003C (v01 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010834] ACPI: SSDT 0x00000000CCDF6000 000033 (v01 LENOVO TP-SSDT1 00000100 INTL 20120711)
[    0.010841] ACPI: SSDT 0x00000000CCDF5000 000486 (v01 LENOVO TP-SSDT2 00000200 INTL 20120711)
[    0.010848] ACPI: SSDT 0x00000000CCDE3000 0009CB (v01 LENOVO SataAhci 00001000 INTL 20120711)
[    0.010856] ACPI: SSDT 0x00000000CCDE2000 000152 (v01 LENOVO Rmv_Batt 00001000 INTL 20120711)
[    0.010863] ACPI: SSDT 0x00000000CCDE1000 000691 (v01 LENOVO Cpu0Ist  00003000 INTL 20120711)
[    0.010871] ACPI: SSDT 0x00000000CCDE0000 000B74 (v02 LENOVO CpuSsdt  00003000 INTL 20120711)
[    0.010878] ACPI: SSDT 0x00000000CCDDF000 000369 (v02 LENOVO CtdpB    00001000 INTL 20120711)
[    0.010886] ACPI: SSDT 0x00000000CCDDD000 001475 (v01 LENOVO SaSsdt   00003000 INTL 20120711)
[    0.010894] ACPI: SSDT 0x00000000CCDDC000 000394 (v02 LENOVO CppcTabl 00001000 INTL 20120711)
[    0.010901] ACPI: PCCT 0x00000000CCDDB000 00006E (v05 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010908] ACPI: SSDT 0x00000000CCDDA000 000AC4 (v02 LENOVO Cpc_Tabl 00001000 INTL 20120711)
[    0.010916] ACPI: TCPA 0x00000000CCDD9000 000032 (v02 PTL    LENOVO   06040000 LNVO 00000001)
[    0.010924] ACPI: SSDT 0x00000000CCDD8000 0006B0 (v02 Intel_ TpmTable 00001000 INTL 20120711)
[    0.010931] ACPI: UEFI 0x00000000CCDD7000 000042 (v01 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010938] ACPI: MSDM 0x00000000CCCB1000 000055 (v03 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010946] ACPI: BATB 0x00000000CCDD6000 00004A (v02 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010953] ACPI: FPDT 0x00000000CCDD5000 000064 (v01 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010960] ACPI: UEFI 0x00000000CCDD4000 000332 (v01 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010967] ACPI: DMAR 0x00000000CCDD3000 0000B0 (v01 LENOVO TP-N10   00001330 PTEC 00000002)
[    0.010986] ACPI: Local APIC address 0xfee00000
[    0.011182] No NUMA configuration found
[    0.011185] Faking a node at [mem 0x0000000000000000-0x000000022dffffff]
[    0.011194] NODE_DATA(0) allocated [mem 0x22dff9000-0x22dffcfff]
[    0.011248] Zone ranges:
[    0.011250]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.011254]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.011257]   Normal   [mem 0x0000000100000000-0x000000022dffffff]
[    0.011260]   Device   empty
[    0.011262] Movable zone start for each node
[    0.011264] Early memory node ranges
[    0.011266]   node   0: [mem 0x0000000000001000-0x000000000009cfff]
[    0.011269]   node   0: [mem 0x0000000000100000-0x000000000fffffff]
[    0.011271]   node   0: [mem 0x000000001000b000-0x00000000bf063fff]
[    0.011273]   node   0: [mem 0x0000000100000000-0x000000022dffffff]
[    0.011461] Zeroed struct page in unavailable ranges: 4107 pages
[    0.011464] Initmem setup node 0 [mem 0x0000000000001000-0x000000022dffffff]
[    0.011468] On node 0 totalpages: 2019317
[    0.011472]   DMA zone: 64 pages used for memmap
[    0.011474]   DMA zone: 21 pages reserved
[    0.011477]   DMA zone: 3996 pages, LIFO batch:0
[    0.012951]   DMA32 zone: 12162 pages used for memmap
[    0.012953]   DMA32 zone: 778329 pages, LIFO batch:63
[    0.065399]   Normal zone: 19328 pages used for memmap
[    0.065402]   Normal zone: 1236992 pages, LIFO batch:63
[    0.145947] Reserving Intel graphics memory at [mem 0xce000000-0xcfffffff]
[    0.146274] ACPI: PM-Timer IO Port: 0x1808
[    0.146278] ACPI: Local APIC address 0xfee00000
[    0.146294] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.146297] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.146313] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
[    0.146319] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.146322] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.146326] ACPI: IRQ0 used by override.
[    0.146329] ACPI: IRQ9 used by override.
[    0.146334] Using ACPI (MADT) for SMP configuration information
[    0.146338] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.146348] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[    0.146389] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.146393] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.146395] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.146397] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.146401] PM: Registered nosave memory: [mem 0x10000000-0x1000afff]
[    0.146405] PM: Registered nosave memory: [mem 0xbf064000-0xccbfefff]
[    0.146407] PM: Registered nosave memory: [mem 0xccbff000-0xccd7efff]
[    0.146409] PM: Registered nosave memory: [mem 0xccd7f000-0xccdfefff]
[    0.146411] PM: Registered nosave memory: [mem 0xccdff000-0xcfffffff]
[    0.146412] PM: Registered nosave memory: [mem 0xd0000000-0xf7ffffff]
[    0.146414] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.146416] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[    0.146417] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.146419] PM: Registered nosave memory: [mem 0xfec01000-0xfed07fff]
[    0.146421] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[    0.146423] PM: Registered nosave memory: [mem 0xfed09000-0xfed0ffff]
[    0.146424] PM: Registered nosave memory: [mem 0xfed10000-0xfed19fff]
[    0.146426] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[    0.146428] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[    0.146429] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[    0.146431] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.146433] PM: Registered nosave memory: [mem 0xfee01000-0xff9fffff]
[    0.146435] PM: Registered nosave memory: [mem 0xffa00000-0xffffffff]
[    0.146442] [mem 0xd0000000-0xf7ffffff] available for PCI devices
[    0.146444] Booting paravirtualized kernel on bare hardware
[    0.146450] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.493506] random: get_random_bytes called from start_kernel+0x95/0x54e with crng_init=0
[    0.493522] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:8 nr_node_ids:1
[    0.494363] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672 u262144
[    0.494379] pcpu-alloc: s147456 r8192 d28672 u262144 alloc=1*2097152
[    0.494382] pcpu-alloc: [0] 0 1 2 3 4 5 6 7 
[    0.494427] Built 1 zonelists, mobility grouping on.  Total pages: 1987742
[    0.494429] Policy zone: Normal
[    0.494433] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=14000a61-ed45-4b51-a48e-1153ec97851b rw quiet
[    0.510183] Calgary: detecting Calgary via BIOS EBDA area
[    0.510186] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.559416] Memory: 7846304K/8077268K available (12293K kernel code, 1268K rwdata, 3728K rodata, 1532K init, 3936K bss, 230964K reserved, 0K cma-reserved)
[    0.559870] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.559884] Kernel/User page tables isolation: enabled
[    0.559920] ftrace: allocating 35812 entries in 140 pages
[    0.602892] rcu: Preemptible hierarchical RCU implementation.
[    0.602895] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.602898] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.602900] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=8.
[    0.602902] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[    0.602904] 	Tasks RCU enabled.
[    0.602906] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.602908] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.607260] NR_IRQS: 20736, nr_irqs: 760, preallocated irqs: 16
[    0.607685] rcu: 	Offload RCU callbacks from CPUs: (none).
[    0.607784] Console: colour dummy device 80x25
[    0.607792] printk: console [tty0] enabled
[    0.607845] ACPI: Core revision 20181003
[    0.608290] ACPI: EC: EC started
[    0.608292] ACPI: EC: interrupt blocked
[    0.608317] ACPI: \: Used as first EC
[    0.608321] ACPI: \: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.608325] ACPI: \: Used as boot ECDT EC to handle transactions
[    0.608431] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[    0.608445] hpet clockevent registered
[    0.608453] APIC: Switch to symmetric I/O mode setup
[    0.608457] DMAR: Host address width 39
[    0.608460] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[    0.608471] DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 7e1ff0505e
[    0.608474] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[    0.608481] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c20660462 ecap f010da
[    0.608484] DMAR: RMRR base: 0x000000ca65b000 end: 0x000000ca671fff
[    0.608487] DMAR: RMRR base: 0x000000cd800000 end: 0x000000cfffffff
[    0.608491] DMAR-IR: IOAPIC id 2 under DRHD base  0xfed91000 IOMMU 1
[    0.608493] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
[    0.608495] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
[    0.608497] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
[    0.609438] DMAR-IR: Enabled IRQ remapping in xapic mode
[    0.609440] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.610352] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.625124] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2113f3e285e, max_idle_ns: 440795211891 ns
[    0.625157] Calibrating delay loop (skipped), value calculated using timer frequency.. 4591.79 BogoMIPS (lpj=7649273)
[    0.625163] pid_max: default: 32768 minimum: 301
[    0.625258] LSM: Security Framework initializing
[    0.625261] Yama: becoming mindful.
[    0.625272] AppArmor: AppArmor disabled by boot time parameter
[    0.628074] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.629485] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.629558] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.629607] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.630173] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[    0.630174] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[    0.630185] mce: CPU supports 7 MCE banks
[    0.630205] CPU0: Thermal monitoring enabled (TM1)
[    0.630235] process: using mwait in idle threads
[    0.630241] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8
[    0.630243] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.630247] Spectre V2 : Mitigation: Full generic retpoline
[    0.630251] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.630252] Spectre V2 : Enabling Restricted Speculation for firmware calls
[    0.630268] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
[    0.630270] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl
[    0.630273] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.630910] Freeing SMP alternatives memory: 28K
[    0.635207] TSC deadline timer enabled
[    0.635213] smpboot: CPU0: Intel(R) Core(TM) i5-5300U CPU @ 2.30GHz (family: 0x6, model: 0x3d, stepping: 0x4)
[    0.655148] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver.
[    0.655205] ... version:                3
[    0.655207] ... bit width:              48
[    0.655209] ... generic registers:      4
[    0.655211] ... value mask:             0000ffffffffffff
[    0.655213] ... max period:             00007fffffffffff
[    0.655215] ... fixed-purpose events:   3
[    0.655216] ... event mask:             000000070000000f
[    0.661804] rcu: Hierarchical SRCU implementation.
[    0.685757] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.691819] smp: Bringing up secondary CPUs ...
[    0.731828] x86: Booting SMP configuration:
[    0.731831] .... node  #0, CPUs:      #1 #2 #3
[    0.812832] smp: Brought up 1 node, 4 CPUs
[    0.812832] smpboot: Max logical packages: 2
[    0.812832] smpboot: Total of 4 processors activated (18365.18 BogoMIPS)
[    0.815642] devtmpfs: initialized
[    0.815642] x86/mm: Memory block size: 128MB
[    0.816985] PM: Registering ACPI NVS region [mem 0xccbff000-0xccd7efff] (1572864 bytes)
[    0.816985] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.816985] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.816985] pinctrl core: initialized pinctrl subsystem
[    0.818671] RTC time: 11:40:38, date: 01/13/19
[    0.819040] NET: Registered protocol family 16
[    0.819246] audit: initializing netlink subsys (disabled)
[    0.819264] audit: type=2000 audit(1547379638.209:1): state=initialized audit_enabled=0 res=1
[    0.819264] cpuidle: using governor ladder
[    0.825163] cpuidle: using governor menu
[    0.825163] Detected 1 PCC Subspaces
[    0.825192] Registering PCC driver as Mailbox controller
[    0.825245] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.825245] ACPI: bus type PCI registered
[    0.825245] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.825572] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.825602] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.825602] PCI: Using configuration type 1 for base access
[    0.828778] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.828778] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.828778] ACPI: Added _OSI(Module Device)
[    0.828778] ACPI: Added _OSI(Processor Device)
[    0.828778] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.828778] ACPI: Added _OSI(Processor Aggregator Device)
[    0.828778] ACPI: Added _OSI(Linux-Dell-Video)
[    0.828778] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.885411] ACPI: 12 ACPI AML tables successfully acquired and loaded
[    0.891688] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.906966] ACPI Error: Needed type [Reference], found [Integer] 0000000044bd0d70 (20181003/exresop-69)
[    0.906978] ACPI Error: AE_AML_OPERAND_TYPE, While resolving operands for [Store] (20181003/dswexec-427)
[    0.906990] ACPI Error: Method parse/execution failed \_PR.CPU0._PDC, AE_AML_OPERAND_TYPE (20181003/psparse-516)
[    0.908226] ACPI: Dynamic OEM Table Load:
[    0.908249] ACPI: SSDT 0xFFFF8F56646B4800 0005AA (v01 PmRef  ApIst    00003000 INTL 20120711)
[    0.910338] ACPI: Dynamic OEM Table Load:
[    0.910356] ACPI: SSDT 0xFFFF8F56640BA200 000119 (v02 PmRef  ApCst    00003000 INTL 20120711)
[    0.913736] ACPI: Interpreter enabled
[    0.913835] ACPI: (supports S0 S3 S4 S5)
[    0.913838] ACPI: Using IOAPIC for interrupt routing
[    0.913922] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.914853] ACPI: Enabled 6 GPEs in block 00 to 7F
[    0.924527] ACPI: Power Resource [PUBS] (on)
[    0.924959] acpi PNP0C0A:01: ACPI dock station (docks/bays count: 1)
[    0.926002] ACPI: Power Resource [NVP3] (on)
[    0.926081] ACPI: Power Resource [NVP2] (on)
[    0.938422] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.938461] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *9 10 11)
[    0.938461] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11)
[    0.938461] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 *6 7 9 10 11)
[    0.938461] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.938461] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.938461] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 *10 11)
[    0.938461] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 9 10 11)
[    0.938461] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    0.938461] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.938461] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug PCIeCapability LTR]
[    0.938461] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.938461] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.938461] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.938461] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.938789] PCI host bridge to bus 0000:00
[    0.938796] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.938800] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.938804] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.938809] pci_bus 0000:00: root bus resource [mem 0xd0000000-0xfebfffff window]
[    0.938812] pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed4bfff window]
[    0.938817] pci_bus 0000:00: root bus resource [bus 00-3f]
[    0.938838] pci 0000:00:00.0: [8086:1604] type 00 class 0x060000
[    0.939086] pci 0000:00:02.0: [8086:1616] type 00 class 0x030000
[    0.939119] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf0ffffff 64bit]
[    0.939136] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.939149] pci 0000:00:02.0: reg 0x20: [io  0x3000-0x303f]
[    0.939383] pci 0000:00:03.0: [8086:160c] type 00 class 0x040300
[    0.939410] pci 0000:00:03.0: reg 0x10: [mem 0xf1230000-0xf1233fff 64bit]
[    0.939687] pci 0000:00:14.0: [8086:9cb1] type 00 class 0x0c0330
[    0.939723] pci 0000:00:14.0: reg 0x10: [mem 0xf1220000-0xf122ffff 64bit]
[    0.939828] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.940011] pci 0000:00:16.0: [8086:9cba] type 00 class 0x078000
[    0.940050] pci 0000:00:16.0: reg 0x10: [mem 0xf1239000-0xf123901f 64bit]
[    0.940165] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.940348] pci 0000:00:19.0: [8086:15a2] type 00 class 0x020000
[    0.940380] pci 0000:00:19.0: reg 0x10: [mem 0xf1200000-0xf121ffff]
[    0.940395] pci 0000:00:19.0: reg 0x14: [mem 0xf123e000-0xf123efff]
[    0.940409] pci 0000:00:19.0: reg 0x18: [io  0x3080-0x309f]
[    0.940509] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.940687] pci 0000:00:1b.0: [8086:9ca0] type 00 class 0x040300
[    0.940723] pci 0000:00:1b.0: reg 0x10: [mem 0xf1234000-0xf1237fff 64bit]
[    0.940827] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.941010] pci 0000:00:1c.0: [8086:9c9a] type 01 class 0x060400
[    0.941139] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.941505] pci 0000:00:1c.1: [8086:9c94] type 01 class 0x060400
[    0.941642] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.942019] pci 0000:00:1d.0: [8086:9ca6] type 00 class 0x0c0320
[    0.942056] pci 0000:00:1d.0: reg 0x10: [mem 0xf123d000-0xf123d3ff]
[    0.942195] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.942385] pci 0000:00:1f.0: [8086:9cc3] type 00 class 0x060100
[    0.942722] pci 0000:00:1f.2: [8086:9c83] type 00 class 0x010601
[    0.942752] pci 0000:00:1f.2: reg 0x10: [io  0x30a8-0x30af]
[    0.942766] pci 0000:00:1f.2: reg 0x14: [io  0x30b4-0x30b7]
[    0.942780] pci 0000:00:1f.2: reg 0x18: [io  0x30a0-0x30a7]
[    0.942794] pci 0000:00:1f.2: reg 0x1c: [io  0x30b0-0x30b3]
[    0.942807] pci 0000:00:1f.2: reg 0x20: [io  0x3060-0x307f]
[    0.942821] pci 0000:00:1f.2: reg 0x24: [mem 0xf123c000-0xf123c7ff]
[    0.942888] pci 0000:00:1f.2: PME# supported from D3hot
[    0.943061] pci 0000:00:1f.3: [8086:9ca2] type 00 class 0x0c0500
[    0.943092] pci 0000:00:1f.3: reg 0x10: [mem 0xf1238000-0xf12380ff 64bit]
[    0.943127] pci 0000:00:1f.3: reg 0x20: [io  0xefa0-0xefbf]
[    0.943337] pci 0000:00:1f.6: [8086:9ca4] type 00 class 0x118000
[    0.943387] pci 0000:00:1f.6: reg 0x10: [mem 0xf123b000-0xf123bfff 64bit]
[    0.943810] pci 0000:02:00.0: [10ec:5227] type 00 class 0xff0000
[    0.943913] pci 0000:02:00.0: reg 0x10: [mem 0xf1100000-0xf1100fff]
[    0.944423] pci 0000:02:00.0: supports D1 D2
[    0.944428] pci 0000:02:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.944773] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.944783] pci 0000:00:1c.0:   bridge window [mem 0xf1100000-0xf11fffff]
[    0.948476] pci 0000:03:00.0: [8086:095b] type 00 class 0x028000
[    0.948984] pci 0000:03:00.0: reg 0x10: [mem 0xf1000000-0xf1001fff 64bit]
[    0.950483] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    0.951471] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.951481] pci 0000:00:1c.1:   bridge window [mem 0xf1000000-0xf10fffff]
[    0.951799] ACPI: EC: interrupt unblocked
[    0.951799] ACPI: EC: event unblocked
[    0.951799] ACPI: \_SB_.PCI0.LPC_.EC__: GPE=0x25, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.951799] ACPI: \_SB_.PCI0.LPC_.EC__: Used as boot DSDT EC to handle transactions and events
[    0.951820] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.951820] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.951832] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.951834] vgaarb: loaded
[    0.952110] ACPI: bus type USB registered
[    0.952110] usbcore: registered new interface driver usbfs
[    0.952110] usbcore: registered new interface driver hub
[    0.955142] usbcore: registered new device driver usb
[    0.955142] pps_core: LinuxPPS API ver. 1 registered
[    0.955142] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.955142] PTP clock support registered
[    0.955142] EDAC MC: Ver: 3.0.0
[    0.955184] PCI: Using ACPI for IRQ routing
[    0.957519] PCI: pci_cache_line_size set to 64 bytes
[    0.958488] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
[    0.958492] e820: reserve RAM buffer [mem 0xbf064000-0xbfffffff]
[    0.958495] e820: reserve RAM buffer [mem 0x22e000000-0x22fffffff]
[    0.958725] NetLabel: Initializing
[    0.958727] NetLabel:  domain hash size = 128
[    0.958729] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.958763] NetLabel:  unlabeled traffic allowed by default
[    0.958771] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.958771] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.960602] clocksource: Switched to clocksource tsc-early
[    0.986227] VFS: Disk quotas dquot_6.6.0
[    0.986275] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.986449] pnp: PnP ACPI init
[    0.988050] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.988056] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.988061] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.988065] system 00:00: [mem 0x000c8000-0x000cbfff] could not be reserved
[    0.988070] system 00:00: [mem 0x000cc000-0x000cffff] could not be reserved
[    0.988075] system 00:00: [mem 0x000d0000-0x000d3fff] has been reserved
[    0.988079] system 00:00: [mem 0x000d4000-0x000d7fff] has been reserved
[    0.988084] system 00:00: [mem 0x000d8000-0x000dbfff] has been reserved
[    0.988088] system 00:00: [mem 0x000dc000-0x000dffff] has been reserved
[    0.988093] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.988098] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.988102] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.988107] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.988111] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.988116] system 00:00: [mem 0x00100000-0xcfffffff] could not be reserved
[    0.988122] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.988127] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.988141] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.988490] pnp 00:01: [Firmware Bug]: PNP resource [mem 0xfed10000-0xfed13fff] covers only part of 0000:00:00.0 Intel MCH; extending to [mem 0xfed10000-0xfed17fff]
[    0.988538] system 00:01: [io  0x1800-0x189f] has been reserved
[    0.988544] system 00:01: [io  0x0800-0x087f] has been reserved
[    0.988548] system 00:01: [io  0x0880-0x08ff] has been reserved
[    0.988553] system 00:01: [io  0x0900-0x097f] has been reserved
[    0.988557] system 00:01: [io  0x0980-0x09ff] has been reserved
[    0.988562] system 00:01: [io  0x0a00-0x0a7f] has been reserved
[    0.988566] system 00:01: [io  0x0a80-0x0aff] has been reserved
[    0.988571] system 00:01: [io  0x0b00-0x0b7f] has been reserved
[    0.988576] system 00:01: [io  0x0b80-0x0bff] has been reserved
[    0.988580] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.988585] system 00:01: [io  0x1600-0x167f] has been reserved
[    0.988589] system 00:01: [io  0x1640-0x165f] has been reserved
[    0.988596] system 00:01: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.988601] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.988606] system 00:01: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.988611] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.988615] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.988620] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.988632] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.988829] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.988883] pnp 00:03: Plug and Play ACPI device, IDs LEN0071 PNP0303 (active)
[    0.988934] pnp 00:04: Plug and Play ACPI device, IDs LEN0046 PNP0f13 (active)
[    0.989920] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.990510] system 00:06: [mem 0xd0010000-0xd001ffff] has been reserved
[    0.990516] system 00:06: [mem 0xd0000000-0xd000ffff] has been reserved
[    0.990527] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.990641] pnp: PnP ACPI: found 7 devices
[    0.998625] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.998666] pci 0000:00:1c.0: PCI bridge to [bus 02]
[    0.998677] pci 0000:00:1c.0:   bridge window [mem 0xf1100000-0xf11fffff]
[    0.998691] pci 0000:00:1c.1: PCI bridge to [bus 03]
[    0.998700] pci 0000:00:1c.1:   bridge window [mem 0xf1000000-0xf10fffff]
[    0.998716] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.998721] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.998725] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.998729] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfebfffff window]
[    0.998734] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed4bfff window]
[    0.998738] pci_bus 0000:02: resource 1 [mem 0xf1100000-0xf11fffff]
[    0.998742] pci_bus 0000:03: resource 1 [mem 0xf1000000-0xf10fffff]
[    0.999062] NET: Registered protocol family 2
[    0.999497] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes)
[    0.999576] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.999855] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.000121] TCP: Hash tables configured (established 65536 bind 65536)
[    1.000222] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    1.000282] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    1.000447] NET: Registered protocol family 1
[    1.000459] NET: Registered protocol family 44
[    1.000484] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.001526] PCI: CLS 64 bytes, default 64
[    1.001609] Unpacking initramfs...
[    1.337620] Freeing initrd memory: 7688K
[    1.355196] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    1.355202] software IO TLB: mapped [mem 0xbb064000-0xbf064000] (64MB)
[    1.355440] check: Scanning for low memory corruption every 60 seconds
[    1.356917] Initialise system trusted keyrings
[    1.356944] Key type blacklist registered
[    1.357048] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    1.360622] zbud: loaded
[    1.442721] Key type asymmetric registered
[    1.442725] Asymmetric key parser 'x509' registered
[    1.442756] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.442847] io scheduler noop registered
[    1.442852] io scheduler deadline registered
[    1.442943] io scheduler cfq registered (default)
[    1.442948] io scheduler mq-deadline registered
[    1.442950] io scheduler kyber registered
[    1.443067] io scheduler bfq registered
[    1.444231] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.444419] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[    1.444421] vesafb: scrolling: redraw
[    1.444426] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.444450] vesafb: framebuffer at 0xe0000000, mapped to 0x00000000ebb8cee4, using 4160k, total 4160k
[    1.444562] fbcon: Deferring console take-over
[    1.444565] fb0: VESA VGA frame buffer device
[    1.444607] intel_idle: MWAIT substates: 0x11142120
[    1.444609] intel_idle: v0.4.1 model 0x3D
[    1.445246] intel_idle: lapic_timer_reliable_states 0xffffffff
[    1.445361] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    1.445390] ACPI: Lid Switch [LID]
[    1.445480] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    1.445503] ACPI: Sleep Button [SLPB]
[    1.445631] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    1.445647] ACPI: Power Button [PWRF]
[    1.449853] thermal LNXTHERM:00: registered as thermal_zone0
[    1.449858] ACPI: Thermal Zone [THM0] (37 C)
[    1.450398] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.453302] usbcore: registered new interface driver usbserial_generic
[    1.453317] usbserial: USB Serial support registered for generic
[    1.453360] rtc_cmos 00:02: RTC can wake from S4
[    1.453668] rtc_cmos 00:02: registered as rtc0
[    1.453705] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.453854] intel_pstate: Intel P-state driver initializing
[    1.454174] ledtrig-cpu: registered to indicate activity on CPUs
[    1.454766] NET: Registered protocol family 10
[    1.466288] Segment Routing with IPv6
[    1.466311] NET: Registered protocol family 17
[    1.466551] RAS: Correctable Errors collector initialized.
[    1.466591] microcode: sig=0x306d4, pf=0x40, revision=0x2b
[    1.466645] microcode: Microcode Update Driver: v2.2.
[    1.466655] sched_clock: Marking stable (1465893701, 746444)->(1477862659, -11222514)
[    1.466862] registered taskstats version 1
[    1.466870] Loading compiled-in X.509 certificates
[    1.469870] Loaded X.509 cert 'Build time autogenerated kernel key: 607bf7b41813a10b7fecf0eb8d5fb1179fd6fddf'
[    1.469894] zswap: loaded using pool lzo/zbud
[    1.474629] Key type big_key registered
[    1.475076]   Magic number: 3:244:681
[    1.475169] rtc_cmos 00:02: setting system clock to 2019-01-13 11:40:38 UTC (1547379638)
[    1.476295] Freeing unused decrypted memory: 2040K
[    1.476599] Freeing unused kernel image memory: 1532K
[    1.501912] Write protecting the kernel read-only data: 18432k
[    1.502931] Freeing unused kernel image memory: 2016K
[    1.503202] Freeing unused kernel image memory: 368K
[    1.517573] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.517574] x86/mm: Checking user space page tables
[    1.525743] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.525744] Run /init as init process
[    1.537948] fbcon: Taking over console
[    1.538009] Console: switching to colour frame buffer device 170x48
[    1.663972] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    1.665745] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.665785] serio: i8042 AUX port at 0x60,0x64 irq 12
[    1.674063] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.674071] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    1.674582] SCSI subsystem initialized
[    1.675161] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[    1.675168] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    1.675374] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[    1.675377] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.675379] usb usb1: Product: xHCI Host Controller
[    1.675381] usb usb1: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd
[    1.675383] usb usb1: SerialNumber: 0000:00:14.0
[    1.675530] hub 1-0:1.0: USB hub found
[    1.675544] hub 1-0:1.0: 11 ports detected
[    1.677501] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.679478] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    1.679483] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    1.679488] xhci_hcd 0000:00:14.0: Host supports USB 3.0  SuperSpeed
[    1.679534] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.20
[    1.679536] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.679538] usb usb2: Product: xHCI Host Controller
[    1.679540] usb usb2: Manufacturer: Linux 4.20.0-arch1-1-ARCH xhci-hcd
[    1.679541] usb usb2: SerialNumber: 0000:00:14.0
[    1.679674] hub 2-0:1.0: USB hub found
[    1.679684] hub 2-0:1.0: 4 ports detected
[    1.681521] ehci-pci: EHCI PCI platform driver
[    1.681695] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    1.681702] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    1.681713] ehci-pci 0000:00:1d.0: debug port 2
[    1.685607] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    1.685629] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf123d000
[    1.689506] libata version 3.00 loaded.
[    1.693607] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    1.694677] ahci 0000:00:1f.2: version 3.0
[    1.698518] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    1.698592] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.20
[    1.698594] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.698596] usb usb3: Product: EHCI Host Controller
[    1.698598] usb usb3: Manufacturer: Linux 4.20.0-arch1-1-ARCH ehci_hcd
[    1.698600] usb usb3: SerialNumber: 0000:00:1d.0
[    1.698748] hub 3-0:1.0: USB hub found
[    1.698755] hub 3-0:1.0: 3 ports detected
[    1.704943] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 3 ports 6 Gbps 0x1 impl SATA mode
[    1.704947] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst 
[    1.705341] scsi host0: ahci
[    1.705483] scsi host1: ahci
[    1.705605] scsi host2: ahci
[    1.705661] ata1: SATA max UDMA/133 abar m2048@0xf123c000 port 0xf123c100 irq 44
[    1.705663] ata2: DUMMY
[    1.705663] ata3: DUMMY
[    2.008577] usb 1-6: new full-speed USB device number 2 using xhci_hcd
[    2.019361] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    2.020660] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.020669] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.020733] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[    2.020880] ata1.00: supports DRM functions and may not be fully accessible
[    2.020923] ata1.00: ATA-10: CT1000MX500SSD1, M3CR023, max UDMA/133
[    2.020928] ata1.00: 1953525168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[    2.022318] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (SET FEATURES) succeeded
[    2.022327] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.022390] ata1.00: ACPI cmd ef/10:09:00:00:00:a0 (SET FEATURES) succeeded
[    2.022538] ata1.00: supports DRM functions and may not be fully accessible
[    2.023395] ata1.00: configured for UDMA/133
[    2.028574] usb 3-1: new high-speed USB device number 2 using ehci-pci
[    2.034176] scsi 0:0:0:0: Direct-Access     ATA      CT1000MX500SSD1  023  PQ: 0 ANSI: 5
[    2.044231] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    2.044233] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    2.044240] sd 0:0:0:0: [sda] Write Protect is off
[    2.044242] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.044252] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.047926]  sda: sda1 sda2 sda3
[    2.048401] sd 0:0:0:0: [sda] supports TCG Opal
[    2.048403] sd 0:0:0:0: [sda] Attached SCSI disk
[    2.128693] random: fast init done
[    2.136407] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    2.152957] usb 1-6: New USB device found, idVendor=138a, idProduct=0017, bcdDevice= 0.78
[    2.152959] usb 1-6: New USB device strings: Mfr=0, Product=0, SerialNumber=1
[    2.152970] usb 1-6: SerialNumber: a5d4718cc00d
[    2.175549] usb 3-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[    2.175552] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.175845] hub 3-1:1.0: USB hub found
[    2.175944] hub 3-1:1.0: 8 ports detected
[    2.258749] systemd[1]: systemd 240 running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[    2.275225] usb 1-7: new full-speed USB device number 3 using xhci_hcd
[    2.275310] systemd[1]: Detected architecture x86-64.
[    2.280304] systemd[1]: Set hostname to <x250>.
[    2.338007] systemd[1]: /usr/lib/systemd/system/auditd.service:12: PIDFile= references path below legacy directory /var/run/, updating /var/run/auditd.pid → /run/auditd.pid; please update the unit file accordingly.
[    2.365157] tsc: Refined TSC clocksource calibration: 2294.688 MHz
[    2.365165] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x21139aef754, max_idle_ns: 440795211890 ns
[    2.365180] clocksource: Switched to clocksource tsc
[    2.377915] systemd[1]: Listening on Journal Audit Socket.
[    2.379010] systemd[1]: Created slice system-getty.slice.
[    2.379048] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    2.379253] systemd[1]: Listening on LVM2 poll daemon socket.
[    2.379403] systemd[1]: Created slice User and Session Slice.
[    2.379463] systemd[1]: Listening on Journal Socket (/dev/log).
[    2.392883] EXT4-fs (sda3): re-mounted. Opts: data=ordered
[    2.409290] random: systemd-random-: uninitialized urandom read (512 bytes read)
[    2.416313] usb 1-7: New USB device found, idVendor=8087, idProduct=0a2a, bcdDevice= 0.01
[    2.416316] usb 1-7: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.416535] audit: type=1130 audit(1547379639.436:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-random-seed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.418043] random: lvm: uninitialized urandom read (4 bytes read)
[    2.422560] audit: type=1130 audit(1547379639.443:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-lvmetad comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.440575] audit: type=1130 audit(1547379639.460:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.448969] vboxdrv: loading out-of-tree module taints kernel.
[    2.449218] vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
[    2.455698] vboxdrv: Found 4 processor cores
[    2.463922] audit: type=1130 audit(1547379639.483:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udev-trigger comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.471239] audit: type=1130 audit(1547379639.490:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.474595] audit: type=1130 audit(1547379639.493:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.478653] vboxdrv: TSC mode is Invariant, tentative frequency 2294687214 Hz
[    2.478654] vboxdrv: Successfully loaded version 6.0.0 (interface 0x00290007)
[    2.481362] VBoxPciLinuxInit
[    2.481368] vboxpci: IOMMU not found (not registered)
[    2.482628] VBoxNetAdp: Successfully started.
[    2.484243] systemd-journald[264]: Received request to flush runtime journal from PID 1
[    2.484860] VBoxNetFlt: Successfully started.
[    2.486221] audit: type=1130 audit(1547379639.506:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-modules-load comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.494931] audit: type=1130 audit(1547379639.513:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-sysctl comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.523039] mmc0: cannot verify signal voltage switch
[    2.538477] usb 1-8: new high-speed USB device number 4 using xhci_hcd
[    2.644111] mmc0: new ultra high speed SDR50 SDHC card at address aaaa
[    2.688198] usb 1-8: New USB device found, idVendor=5986, idProduct=0366, bcdDevice=10.19
[    2.688200] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    2.688202] usb 1-8: Product: Integrated Camera
[    2.688203] usb 1-8: Manufacturer: SunplusIT Inc
[    2.784463] audit: type=1130 audit(1547379639.803:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hwdb-update comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    2.917743] acpi PNP0C14:01: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.917862] acpi PNP0C14:02: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.922787] ACPI: AC Adapter [AC] (off-line)
[    2.937232] tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78)
[    2.939748] battery: ACPI: Battery Slot [BAT0] (battery present)
[    2.953714] battery: ACPI: Battery Slot [BAT1] (battery present)
[    2.971001] i801_smbus 0000:00:1f.3: SPD Write Disable is set
[    2.971034] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[    2.985126] Non-volatile memory driver v1.3
[    2.987200] Linux agpgart interface v0.103
[    2.989810] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    3.016556] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.016558] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.016782] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    3.030827] thinkpad_acpi: ThinkPad ACPI Extras v0.26
[    3.030828] thinkpad_acpi: http://ibm-acpi.sf.net/
[    3.030829] thinkpad_acpi: ThinkPad BIOS N10ET54W (1.33 ), EC unknown
[    3.030831] thinkpad_acpi: Lenovo ThinkPad X250, model 20CLS2A10L
[    3.041426] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[    3.041430] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    3.041431] RAPL PMU: hw unit of domain package 2^-14 Joules
[    3.041432] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    3.041433] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    3.057496] thinkpad_acpi: radio switch found; radios are enabled
[    3.057528] random: crng init done
[    3.057690] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    3.057691] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    3.067247] thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
[    3.087572] thinkpad_acpi: battery 2 registered (start 0, stop 100)
[    3.089874] thinkpad_acpi: battery 1 registered (start 0, stop 100)
[    3.089881] battery: new extension: ThinkPad Battery Extension
[    3.089942] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input6
[    3.098535] cryptd: max_cpu_qlen set to 1000
[    3.137859] AVX2 version of gcm_enc/dec engaged.
[    3.137860] AES CTR mode by8 optimization enabled
[    3.167433] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    3.167532] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC3232: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[    3.167535] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    3.167538] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=2 (0x16/0x15/0x0/0x0/0x0)
[    3.167540] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[    3.167541] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[    3.167543] snd_hda_codec_realtek hdaudioC1D0:      Dock Mic=0x19
[    3.167545] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x1a
[    3.167547] snd_hda_codec_realtek hdaudioC1D0:      Internal Mic=0x12
[    3.199628] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    3.200130] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    3.200133] cfg80211: failed to load regulatory.db
[    3.205654] mmcblk0: mmc0:aaaa SL32G 28.8 GiB 
[    3.228887] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input8
[    3.229098] input: HDA Intel PCH Dock Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input9
[    3.229157] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[    3.229214] input: HDA Intel PCH Dock Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[    3.229271] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[    3.258344]  mmcblk0: p1 p2
[    3.268267] VFIO - User Level meta-driver version: 0.3
[    3.273789] e1000e 0000:00:19.0 0000:00:19.0 (uninitialized): registered PHC clock
[    3.285089] iTCO_vendor_support: vendor-support=0
[    3.292466] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    3.292542] iTCO_wdt: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[    3.292688] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    3.364927] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 50:7b:9d:f2:8a:48
[    3.365825] intel-spi intel-spi: w25q128 (16384 Kbytes)
[    3.366027] Intel(R) Wireless WiFi driver for Linux
[    3.366027] Copyright(c) 2003- 2015 Intel Corporation
[    3.367135] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    3.367161] e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: 1000FF-0FF
[    3.375488] Creating 1 MTD partitions on "intel-spi":
[    3.375491] 0x000000000000-0x000001000000 : "BIOS"
[    3.386528] iwlwifi 0000:03:00.0: loaded firmware version 29.1044073957.0 op_mode iwlmvm
[    3.489743] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    3.533854] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[    3.533856] fb0: switching to inteldrmfb from VESA VGA
[    3.634952] Bluetooth: Core ver 2.22
[    3.634974] NET: Registered protocol family 31
[    3.634977] Bluetooth: HCI device and connection manager initialized
[    3.634981] Bluetooth: HCI socket layer initialized
[    3.634984] Bluetooth: L2CAP socket layer initialized
[    3.634990] Bluetooth: SCO socket layer initialized
[    3.636774] iwlwifi 0000:03:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
[    3.658421] iwlwifi 0000:03:00.0: base HW address: 48:45:20:35:45:5d
[    3.680199] intel_rapl: Found RAPL domain package
[    3.680201] intel_rapl: Found RAPL domain core
[    3.680202] intel_rapl: Found RAPL domain uncore
[    3.680203] intel_rapl: Found RAPL domain dram
[    3.687290] usbcore: registered new interface driver btusb
[    3.706645] Bluetooth: hci0: read Intel version: 370810011003110e32
[    3.706647] Bluetooth: hci0: Intel device is already patched. patch num: 32
[    3.758773] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[    3.759065] thermal thermal_zone3: failed to read out thermal zone (-61)
[    3.762637] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[    3.824944] Console: switching to colour dummy device 80x25
[    3.826438] [drm] Replacing VGA console driver
[    3.833270] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    3.833271] [drm] Driver supports precise vblank timestamp query.
[    3.833310] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    3.857361] psmouse serio1: synaptics: queried max coordinates: x [..5712], y [..4780]
[    3.882963] media: Linux media interface: v0.10
[    3.887067] psmouse serio1: synaptics: queried min coordinates: x [1232..], y [1074..]
[    3.887074] psmouse serio1: synaptics: Trying to set up SMBus access
[    3.908375] videodev: Linux video capture interface: v2.00
[    3.943376] rmi4_smbus 0-002c: registering SMbus-connected sensor
[    3.945870] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:0366)
[    3.963666] uvcvideo 1-8:1.0: Entity type for entity Extension 4 was not initialized!
[    3.963670] uvcvideo 1-8:1.0: Entity type for entity Extension 3 was not initialized!
[    3.963672] uvcvideo 1-8:1.0: Entity type for entity Processing 2 was not initialized!
[    3.963674] uvcvideo 1-8:1.0: Entity type for entity Camera 1 was not initialized!
[    3.963761] input: Integrated Camera: Integrated C as /devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input13
[    3.963842] usbcore: registered new interface driver uvcvideo
[    3.963843] USB Video Class driver (1.1.1)
[    3.998775] rmi4_f01 rmi4-00.fn01: found RMI device, manufacturer: Synaptics, product: TM3075-002, fw id: 1741313
[    4.054765] input: Synaptics TM3075-002 as /devices/rmi4-00/input/input14
[    4.058954] mousedev: PS/2 mouse device common for all mice
[    4.060795] serio: RMI4 PS/2 pass-through port at rmi4-00.fn03
[    4.093163] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    4.114163] [drm] Initialized i915 1.6.0 20180921 for 0000:00:02.0 on minor 0
[    4.114833] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    4.115234] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16
[    4.115491] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    4.296677] fbcon: inteldrmfb (fb0) is primary device
[    4.296732] Console: switching to colour frame buffer device 170x48
[    4.296739] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    4.301992] IPv6: ADDRCONF(NETDEV_UP): enp0s25: link is not ready
[    4.325622] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
[    4.325779] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
[    4.325849] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input19
[    4.325917] input: HDA Intel HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/sound/card0/input20
[    4.325979] input: HDA Intel HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/sound/card0/input21
[    4.327932] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    4.410775] psmouse serio2: trackpoint: IBM TrackPoint firmware: 0x0e, buttons: 3/3
[    4.445203] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    4.469338] input: TPPS/2 IBM TrackPoint as /devices/rmi4-00/rmi4-00.fn03/serio2/input/input15
[    4.565858] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    4.681677] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[    8.886645] kauditd_printk_skb: 24 callbacks suppressed
[    8.886650] audit: type=1131 audit(1547379645.906:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.003407] audit: type=1006 audit(1547379648.023:36): pid=611 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
[   11.019377] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[   11.024988] audit: type=1130 audit(1547379648.043:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.032518] audit: type=1006 audit(1547379648.053:38): pid=613 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   11.071967] audit: type=1130 audit(1547379648.093:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.399867] fuse init (API version 7.28)
[   11.419470] audit: type=1130 audit(1547379648.440:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   11.924270] wlp3s0: authenticate with d0:84:b0:77:dc:5a
[   11.929068] wlp3s0: send auth to d0:84:b0:77:dc:5a (try 1/3)
[   11.933937] wlp3s0: authenticated
[   11.935243] wlp3s0: associate with d0:84:b0:77:dc:5a (try 1/3)
[   11.939968] wlp3s0: RX AssocResp from d0:84:b0:77:dc:5a (capab=0x431 status=0 aid=1)
[   11.943362] wlp3s0: associated
[   11.969106] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[   14.004902] audit: type=1131 audit(1547379651.026:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   22.787664] audit: type=1130 audit(1547379659.806:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.906154] audit: type=1131 audit(1547379670.926:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'

cat /var/log/Xorg.0.log

[     3.863] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[     3.863] Build Operating System: Linux Arch Linux
[     3.863] Current Operating System: Linux x250 4.20.0-arch1-1-ARCH #1 SMP PREEMPT Mon Dec 24 03:00:40 UTC 2018 x86_64
[     3.863] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=14000a61-ed45-4b51-a48e-1153ec97851b rw quiet
[     3.863] Build Date: 25 October 2018  04:42:32PM
[     3.863]  
[     3.863] Current version of pixman: 0.36.0
[     3.863] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[     3.863] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[     3.864] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Jan 13 12:40:40 2019
[     3.866] (==) Using config directory: "/etc/X11/xorg.conf.d"
[     3.866] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[     3.869] (==) No Layout section.  Using the first Screen section.
[     3.869] (==) No screen section available. Using defaults.
[     3.869] (**) |-->Screen "Default Screen Section" (0)
[     3.869] (**) |   |-->Monitor "<default monitor>"
[     3.870] (==) No device specified for screen "Default Screen Section".
	Using the first device section listed.
[     3.870] (**) |   |-->Device "Intel Graphics"
[     3.870] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[     3.870] (==) Automatically adding devices
[     3.870] (==) Automatically enabling devices
[     3.870] (==) Automatically adding GPU devices
[     3.870] (==) Automatically binding GPU devices
[     3.870] (==) Max clients allowed: 256, resource mask: 0x1fffff
[     3.872] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF".
[     3.872] 	Entry deleted from font path.
[     3.872] 	(Run 'mkfontdir' on "/usr/share/fonts/OTF").
[     3.875] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[     3.875] 	Entry deleted from font path.
[     3.875] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[     3.875] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[     3.875] 	Entry deleted from font path.
[     3.875] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[     3.875] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/Type1
[     3.875] (==) ModulePath set to "/usr/lib/xorg/modules"
[     3.876] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[     3.876] (II) Module ABI versions:
[     3.876] 	X.Org ANSI C Emulation: 0.4
[     3.876] 	X.Org Video Driver: 24.0
[     3.876] 	X.Org XInput driver : 24.1
[     3.876] 	X.Org Server Extension : 10.0
[     3.876] (++) using VT number 1

[     3.876] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[     3.878] (--) PCI:*(0@0:2:0) 8086:1616:17aa:2226 rev 9, Mem @ 0xf0000000/16777216, 0xe0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[     3.879] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[     3.879] (II) LoadModule: "glx"
[     3.886] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[     3.904] (II) Module glx: vendor="X.Org Foundation"
[     3.904] 	compiled for 1.20.3, module version = 1.0.0
[     3.904] 	ABI class: X.Org Server Extension, version 10.0
[     3.904] (II) LoadModule: "intel"
[     3.905] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[     3.911] (II) Module intel: vendor="X.Org Foundation"
[     3.911] 	compiled for 1.20.3, module version = 2.99.917
[     3.911] 	Module class: X.Org Video Driver
[     3.911] 	ABI class: X.Org Video Driver, version 24.0
[     3.911] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[     3.911] (II) intel: Driver for Intel(R) HD Graphics
[     3.911] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[     3.911] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[     4.114] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180921
[     4.114] (II) intel(0): SNA compiled from 2.99.917-855-g746ab3bb
[     4.116] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 5500
[     4.116] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx, avx2; using a maximum of 2 threads
[     4.116] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[     4.116] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[     4.116] (==) intel(0): RGB weight 888
[     4.116] (==) intel(0): Default visual is TrueColor
[     4.116] (**) intel(0): Option "TearFree" "true"
[     4.296] (II) intel(0): Output eDP1 has no monitor section
[     4.296] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output eDP1
[     4.296] (II) intel(0): Enabled output eDP1
[     4.296] (II) intel(0): Output DP1 has no monitor section
[     4.296] (II) intel(0): Enabled output DP1
[     4.296] (II) intel(0): Output HDMI1 has no monitor section
[     4.296] (II) intel(0): Enabled output HDMI1
[     4.296] (II) intel(0): Output DP2 has no monitor section
[     4.296] (II) intel(0): Enabled output DP2
[     4.296] (II) intel(0): Output HDMI2 has no monitor section
[     4.296] (II) intel(0): Enabled output HDMI2
[     4.296] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[     4.296] (II) intel(0): Output VIRTUAL1 has no monitor section
[     4.296] (II) intel(0): Enabled output VIRTUAL1
[     4.296] (--) intel(0): Output eDP1 using initial mode 1366x768 on pipe 0
[     4.297] (**) intel(0): TearFree enabled
[     4.297] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[     4.297] (==) intel(0): DPI set to (96, 96)
[     4.297] (II) Loading sub module "dri3"
[     4.297] (II) LoadModule: "dri3"
[     4.297] (II) Module "dri3" already built-in
[     4.297] (II) Loading sub module "dri2"
[     4.297] (II) LoadModule: "dri2"
[     4.297] (II) Module "dri2" already built-in
[     4.297] (II) Loading sub module "present"
[     4.297] (II) LoadModule: "present"
[     4.297] (II) Module "present" already built-in
[     4.300] (II) intel(0): SNA initialized with Broadwell (gen8) backend
[     4.300] (==) intel(0): Backing store enabled
[     4.300] (==) intel(0): Silken mouse disabled
[     4.300] (II) intel(0): HW Cursor enabled
[     4.301] (==) intel(0): DPMS enabled
[     4.301] (==) intel(0): Display hotplug detection enabled
[     4.302] (II) intel(0): [DRI2] Setup complete
[     4.302] (II) intel(0): [DRI2]   DRI driver: i965
[     4.302] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[     4.302] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[     4.302] (II) intel(0): hardware support for Present enabled
[     4.302] (II) Initializing extension Generic Event Extension
[     4.302] (II) Initializing extension SHAPE
[     4.302] (II) Initializing extension MIT-SHM
[     4.302] (II) Initializing extension XInputExtension
[     4.303] (II) Initializing extension XTEST
[     4.303] (II) Initializing extension BIG-REQUESTS
[     4.303] (II) Initializing extension SYNC
[     4.304] (II) Initializing extension XKEYBOARD
[     4.304] (II) Initializing extension XC-MISC
[     4.304] (II) Initializing extension SECURITY
[     4.304] (II) Initializing extension XFIXES
[     4.305] (II) Initializing extension RENDER
[     4.305] (II) Initializing extension RANDR
[     4.305] (II) Initializing extension COMPOSITE
[     4.305] (II) Initializing extension DAMAGE
[     4.306] (II) Initializing extension MIT-SCREEN-SAVER
[     4.306] (II) Initializing extension DOUBLE-BUFFER
[     4.306] (II) Initializing extension RECORD
[     4.306] (II) Initializing extension DPMS
[     4.307] (II) Initializing extension Present
[     4.307] (II) Initializing extension DRI3
[     4.307] (II) Initializing extension X-Resource
[     4.308] (II) Initializing extension XVideo
[     4.308] (II) Initializing extension XVideo-MotionCompensation
[     4.308] (II) Initializing extension GLX
[     4.359] (II) AIGLX: Loaded and initialized i965
[     4.359] (II) GLX: Initialized DRI2 GL provider for screen 0
[     4.359] (II) Initializing extension XFree86-VidModeExtension
[     4.359] (II) Initializing extension XFree86-DGA
[     4.359] (II) Initializing extension XFree86-DRI
[     4.359] (II) Initializing extension DRI2
[     4.362] (II) intel(0): switch to mode 1366x768@60.0 on eDP1 using pipe 0, position (0, 0), rotation normal, reflection none
[     4.417] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[     4.417] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[     4.417] (II) LoadModule: "libinput"
[     4.417] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[     4.422] (II) Module libinput: vendor="X.Org Foundation"
[     4.422] 	compiled for 1.20.1, module version = 0.28.1
[     4.422] 	Module class: X.Org XInput Driver
[     4.422] 	ABI class: X.Org XInput driver, version 24.1
[     4.422] (II) Using input driver 'libinput' for 'Power Button'
[     4.422] (**) Power Button: always reports core events
[     4.422] (**) Option "Device" "/dev/input/event2"
[     4.422] (**) Option "_source" "server/udev"
[     4.429] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     4.429] (II) event2  - Power Button: device is a keyboard
[     4.429] (II) event2  - Power Button: device removed
[     4.444] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[     4.444] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[     4.445] (II) event2  - Power Button: is tagged by udev as: Keyboard
[     4.445] (II) event2  - Power Button: device is a keyboard
[     4.446] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     4.446] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     4.446] (II) Using input driver 'libinput' for 'Video Bus'
[     4.446] (**) Video Bus: always reports core events
[     4.446] (**) Option "Device" "/dev/input/event13"
[     4.446] (**) Option "_source" "server/udev"
[     4.447] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     4.447] (II) event13 - Video Bus: device is a keyboard
[     4.447] (II) event13 - Video Bus: device removed
[     4.481] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event13"
[     4.481] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     4.482] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     4.482] (II) event13 - Video Bus: device is a keyboard
[     4.483] (II) config/udev: Adding input device Lid Switch (/dev/input/event0)
[     4.483] (II) No input driver specified, ignoring this device.
[     4.483] (II) This device may have been added with another device file.
[     4.484] (II) config/udev: Adding input device Sleep Button (/dev/input/event1)
[     4.484] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[     4.484] (II) Using input driver 'libinput' for 'Sleep Button'
[     4.484] (**) Sleep Button: always reports core events
[     4.484] (**) Option "Device" "/dev/input/event1"
[     4.484] (**) Option "_source" "server/udev"
[     4.485] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     4.485] (II) event1  - Sleep Button: device is a keyboard
[     4.485] (II) event1  - Sleep Button: device removed
[     4.508] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1/event1"
[     4.508] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[     4.511] (II) event1  - Sleep Button: is tagged by udev as: Keyboard
[     4.511] (II) event1  - Sleep Button: device is a keyboard
[     4.511] (II) config/udev: Adding drm device (/dev/dri/card0)
[     4.511] (II) xfree86: Adding drm device (/dev/dri/card0)
[     4.511] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[     4.513] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[     4.513] (II) No input driver specified, ignoring this device.
[     4.513] (II) This device may have been added with another device file.
[     4.513] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[     4.514] (II) No input driver specified, ignoring this device.
[     4.514] (II) This device may have been added with another device file.
[     4.514] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[     4.514] (II) No input driver specified, ignoring this device.
[     4.514] (II) This device may have been added with another device file.
[     4.515] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event17)
[     4.516] (II) No input driver specified, ignoring this device.
[     4.516] (II) This device may have been added with another device file.
[     4.517] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event18)
[     4.517] (II) No input driver specified, ignoring this device.
[     4.517] (II) This device may have been added with another device file.
[     4.518] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event11)
[     4.518] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[     4.518] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[     4.518] (**) Integrated Camera: Integrated C: always reports core events
[     4.518] (**) Option "Device" "/dev/input/event11"
[     4.518] (**) Option "_source" "server/udev"
[     4.520] (II) event11 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     4.520] (II) event11 - Integrated Camera: Integrated C: device is a keyboard
[     4.521] (II) event11 - Integrated Camera: Integrated C: device removed
[     4.561] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input13/event11"
[     4.561] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 9)
[     4.565] (II) event11 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     4.565] (II) event11 - Integrated Camera: Integrated C: device is a keyboard
[     4.566] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event8)
[     4.567] (II) No input driver specified, ignoring this device.
[     4.567] (II) This device may have been added with another device file.
[     4.567] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event9)
[     4.567] (II) No input driver specified, ignoring this device.
[     4.567] (II) This device may have been added with another device file.
[     4.568] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[     4.568] (II) No input driver specified, ignoring this device.
[     4.568] (II) This device may have been added with another device file.
[     4.568] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[     4.568] (II) No input driver specified, ignoring this device.
[     4.568] (II) This device may have been added with another device file.
[     4.569] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event7)
[     4.569] (II) No input driver specified, ignoring this device.
[     4.569] (II) This device may have been added with another device file.
[     4.569] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[     4.569] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[     4.569] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[     4.569] (**) AT Translated Set 2 keyboard: always reports core events
[     4.569] (**) Option "Device" "/dev/input/event3"
[     4.569] (**) Option "_source" "server/udev"
[     4.570] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.570] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     4.571] (II) event3  - AT Translated Set 2 keyboard: device removed
[     4.618] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[     4.618] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[     4.619] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[     4.619] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[     4.620] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[     4.620] (II) No input driver specified, ignoring this device.
[     4.620] (II) This device may have been added with another device file.
[     4.621] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[     4.621] (**) ThinkPad Extra Buttons: Applying InputClass "libinput keyboard catchall"
[     4.621] (II) Using input driver 'libinput' for 'ThinkPad Extra Buttons'
[     4.621] (**) ThinkPad Extra Buttons: always reports core events
[     4.621] (**) Option "Device" "/dev/input/event5"
[     4.621] (**) Option "_source" "server/udev"
[     4.621] (II) event5  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[     4.621] (II) event5  - ThinkPad Extra Buttons: device is a keyboard
[     4.621] (II) event5  - ThinkPad Extra Buttons: device removed
[     4.658] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input6/event5"
[     4.658] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 11)
[     4.660] (II) event5  - ThinkPad Extra Buttons: is tagged by udev as: Keyboard Switch
[     4.660] (II) event5  - ThinkPad Extra Buttons: device is a keyboard
[     4.662] (II) config/udev: Adding input device Synaptics TM3075-002 (/dev/input/event12)
[     4.662] (**) Synaptics TM3075-002: Applying InputClass "libinput touchpad catchall"
[     4.662] (**) Synaptics TM3075-002: Applying InputClass "touchpad catchall"
[     4.662] (**) Synaptics TM3075-002: Applying InputClass "Default clickpad buttons"
[     4.662] (**) Synaptics TM3075-002: Applying InputClass "Default clickpad buttons"
[     4.662] (II) LoadModule: "synaptics"
[     4.662] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[     4.663] (II) Module synaptics: vendor="X.Org Foundation"
[     4.663] 	compiled for 1.20.0, module version = 1.9.1
[     4.663] 	Module class: X.Org XInput Driver
[     4.663] 	ABI class: X.Org XInput driver, version 24.1
[     4.663] (II) Using input driver 'synaptics' for 'Synaptics TM3075-002'
[     4.663] (**) Synaptics TM3075-002: always reports core events
[     4.663] (**) Option "Device" "/dev/input/event12"
[     4.691] (II) synaptics: Synaptics TM3075-002: found clickpad property
[     4.691] (--) synaptics: Synaptics TM3075-002: x-axis range 0 - 1680 (res 20)
[     4.691] (--) synaptics: Synaptics TM3075-002: y-axis range 0 - 1002 (res 20)
[     4.691] (--) synaptics: Synaptics TM3075-002: pressure range 0 - 255
[     4.691] (II) synaptics: Synaptics TM3075-002: device does not report finger width.
[     4.691] (--) synaptics: Synaptics TM3075-002: buttons: left double triple
[     4.691] (--) synaptics: Synaptics TM3075-002: Vendor 0x6cb Product 0
[     4.691] (--) synaptics: Synaptics TM3075-002: invalid finger width range.  defaulting to 0 - 15
[     4.691] (**) Option "AreaTopEdge" "2400"
[     4.691] (**) Option "HorizHysteresis" "50"
[     4.691] (**) Option "VertHysteresis" "50"
[     4.691] (**) Option "FingerLow" "50"
[     4.691] (**) Option "FingerHigh" "55"
[     4.691] (**) Option "VertScrollDelta" "-90"
[     4.691] (**) Option "HorizScrollDelta" "-90"
[     4.691] (**) Option "VertTwoFingerScroll" "1"
[     4.691] (**) Option "HorizTwoFingerScroll" "1"
[     4.691] (**) Option "LockedDrags" "1"
[     4.691] (**) Option "TapButton1" "1"
[     4.691] (**) Option "TapButton2" "3"
[     4.691] (**) Option "TapButton3" "2"
[     4.691] (**) Option "PalmDetect" "1"
[     4.691] (**) Option "PalmMinWidth" "5"
[     4.691] (**) Option "PalmMinZ" "40"
[     4.691] (**) Option "MinSpeed" "1"
[     4.691] (**) Option "MaxSpeed" "1"
[     4.691] (**) Option "SoftButtonAreas" "60% 0 0 2400 40% 60% 0 2400"
[     4.691] (--) synaptics: Synaptics TM3075-002: touchpad found
[     4.691] (**) Synaptics TM3075-002: always reports core events
[     4.724] (**) Option "config_info" "udev:/sys/devices/rmi4-00/input/input14/event12"
[     4.724] (II) XINPUT: Adding extended input device "Synaptics TM3075-002" (type: TOUCHPAD, id 12)
[     4.724] (**) synaptics: Synaptics TM3075-002: (accel) MinSpeed is now constant deceleration 1.0
[     4.724] (**) synaptics: Synaptics TM3075-002: (accel) MaxSpeed is now 1.00
[     4.724] (**) synaptics: Synaptics TM3075-002: (accel) AccelFactor is now 0.102
[     4.725] (**) Synaptics TM3075-002: (accel) keeping acceleration scheme 1
[     4.725] (**) Option "ConstantDeceleration" "4"
[     4.725] (**) Synaptics TM3075-002: (accel) constant deceleration by 4.0
[     4.725] (**) Option "AccelerationProfile" "2"
[     4.725] (**) Synaptics TM3075-002: (accel) acceleration profile 2
[     4.725] (**) Synaptics TM3075-002: (accel) acceleration factor: 2.000
[     4.725] (**) Synaptics TM3075-002: (accel) acceleration threshold: 4
[     4.725] (--) synaptics: Synaptics TM3075-002: touchpad found
[     4.726] (II) config/udev: Adding input device Synaptics TM3075-002 (/dev/input/mouse0)
[     4.726] (**) Synaptics TM3075-002: Ignoring device from InputClass "touchpad ignore duplicates"
[     5.893] (II) intel(0): EDID vendor "LGD", prod id 1005
[     5.893] (II) intel(0): Printing DDC gathered Modelines:
[     5.893] (II) intel(0): Modeline "1366x768"x0.0   74.80  1366 1414 1446 1578  768 770 775 790 -hsync -vsync (47.4 kHz eP)
[     6.076] (II) config/udev: removing device Integrated Camera: Integrated C
[     6.076] (II) event11 - Integrated Camera: Integrated C: device removed
[     6.124] (II) UnloadModule: "libinput"
[     6.124] (II) config/udev: Adding input device Integrated Camera: Integrated C (/dev/input/event11)
[     6.124] (**) Integrated Camera: Integrated C: Applying InputClass "libinput keyboard catchall"
[     6.124] (II) Using input driver 'libinput' for 'Integrated Camera: Integrated C'
[     6.124] (**) Integrated Camera: Integrated C: always reports core events
[     6.124] (**) Option "Device" "/dev/input/event11"
[     6.125] (**) Option "_source" "server/udev"
[     6.125] (II) event11 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     6.125] (II) event11 - Integrated Camera: Integrated C: device is a keyboard
[     6.125] (II) event11 - Integrated Camera: Integrated C: device removed
[     6.177] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-8/1-8:1.0/input/input13/event11"
[     6.177] (II) XINPUT: Adding extended input device "Integrated Camera: Integrated C" (type: KEYBOARD, id 9)
[     6.178] (II) event11 - Integrated Camera: Integrated C: is tagged by udev as: Keyboard
[     6.178] (II) event11 - Integrated Camera: Integrated C: device is a keyboard
[     6.179] (II) config/udev: Adding input device Synaptics TM3075-002 (/dev/input/mouse0)
[     6.179] (**) Synaptics TM3075-002: Ignoring device from InputClass "touchpad ignore duplicates"
[     6.179] (II) config/udev: removing device Synaptics TM3075-002
[     6.224] (II) UnloadModule: "synaptics"
[     6.224] (II) config/udev: Adding input device Synaptics TM3075-002 (/dev/input/event12)
[     6.224] (**) Synaptics TM3075-002: Applying InputClass "libinput touchpad catchall"
[     6.224] (**) Synaptics TM3075-002: Applying InputClass "touchpad catchall"
[     6.224] (**) Synaptics TM3075-002: Applying InputClass "Default clickpad buttons"
[     6.224] (**) Synaptics TM3075-002: Applying InputClass "Default clickpad buttons"
[     6.224] (II) Using input driver 'synaptics' for 'Synaptics TM3075-002'
[     6.224] (**) Synaptics TM3075-002: always reports core events
[     6.224] (**) Option "Device" "/dev/input/event12"
[     6.291] (II) synaptics: Synaptics TM3075-002: found clickpad property
[     6.291] (--) synaptics: Synaptics TM3075-002: x-axis range 0 - 1680 (res 20)
[     6.291] (--) synaptics: Synaptics TM3075-002: y-axis range 0 - 1002 (res 20)
[     6.291] (--) synaptics: Synaptics TM3075-002: pressure range 0 - 255
[     6.291] (II) synaptics: Synaptics TM3075-002: device does not report finger width.
[     6.291] (--) synaptics: Synaptics TM3075-002: buttons: left double triple
[     6.291] (--) synaptics: Synaptics TM3075-002: Vendor 0x6cb Product 0
[     6.291] (--) synaptics: Synaptics TM3075-002: invalid finger width range.  defaulting to 0 - 15
[     6.291] (**) Option "AreaTopEdge" "2400"
[     6.291] (**) Option "HorizHysteresis" "50"
[     6.291] (**) Option "VertHysteresis" "50"
[     6.291] (**) Option "FingerLow" "50"
[     6.291] (**) Option "FingerHigh" "55"
[     6.291] (**) Option "VertScrollDelta" "-90"
[     6.291] (**) Option "HorizScrollDelta" "-90"
[     6.291] (**) Option "VertTwoFingerScroll" "1"
[     6.291] (**) Option "HorizTwoFingerScroll" "1"
[     6.291] (**) Option "LockedDrags" "1"
[     6.291] (**) Option "TapButton1" "1"
[     6.291] (**) Option "TapButton2" "3"
[     6.292] (**) Option "TapButton3" "2"
[     6.292] (**) Option "PalmDetect" "1"
[     6.292] (**) Option "PalmMinWidth" "5"
[     6.292] (**) Option "PalmMinZ" "40"
[     6.292] (**) Option "MinSpeed" "1"
[     6.292] (**) Option "MaxSpeed" "1"
[     6.292] (**) Option "SoftButtonAreas" "60% 0 0 2400 40% 60% 0 2400"
[     6.292] (--) synaptics: Synaptics TM3075-002: touchpad found
[     6.292] (**) Synaptics TM3075-002: always reports core events
[     6.361] (**) Option "config_info" "udev:/sys/devices/rmi4-00/input/input14/event12"
[     6.361] (II) XINPUT: Adding extended input device "Synaptics TM3075-002" (type: TOUCHPAD, id 12)
[     6.361] (**) synaptics: Synaptics TM3075-002: (accel) MinSpeed is now constant deceleration 1.0
[     6.361] (**) synaptics: Synaptics TM3075-002: (accel) MaxSpeed is now 1.00
[     6.361] (**) synaptics: Synaptics TM3075-002: (accel) AccelFactor is now 0.102
[     6.361] (**) Synaptics TM3075-002: (accel) keeping acceleration scheme 1
[     6.361] (**) Option "ConstantDeceleration" "4"
[     6.361] (**) Synaptics TM3075-002: (accel) constant deceleration by 4.0
[     6.361] (**) Option "AccelerationProfile" "2"
[     6.361] (**) Synaptics TM3075-002: (accel) acceleration profile 2
[     6.361] (**) Synaptics TM3075-002: (accel) acceleration factor: 2.000
[     6.361] (**) Synaptics TM3075-002: (accel) acceleration threshold: 4
[     6.362] (--) synaptics: Synaptics TM3075-002: touchpad found
[     6.362] (II) config/udev: removing device Video Bus
[     6.362] (II) event13 - Video Bus: device removed
[     6.414] (II) UnloadModule: "libinput"
[     6.415] (II) config/udev: Adding input device Video Bus (/dev/input/event13)
[     6.415] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[     6.415] (II) Using input driver 'libinput' for 'Video Bus'
[     6.415] (**) Video Bus: always reports core events
[     6.415] (**) Option "Device" "/dev/input/event13"
[     6.415] (**) Option "_source" "server/udev"
[     6.417] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     6.417] (II) event13 - Video Bus: device is a keyboard
[     6.417] (II) event13 - Video Bus: device removed
[     6.484] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input16/event13"
[     6.484] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[     6.486] (II) event13 - Video Bus: is tagged by udev as: Keyboard
[     6.486] (II) event13 - Video Bus: device is a keyboard
[     6.487] (II) config/udev: removing GPU device /sys/devices/pci0000:00/0000:00:02.0/drm/card0 /dev/dri/card0
[     6.487] (II) config/udev: Adding drm device (/dev/dri/card0)
[     6.487] (II) xfree86: Adding drm device (/dev/dri/card0)
[     6.487] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[     6.490] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=10 (/dev/input/event18)
[     6.490] (II) No input driver specified, ignoring this device.
[     6.490] (II) This device may have been added with another device file.
[     6.490] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=7 (/dev/input/event15)
[     6.490] (II) No input driver specified, ignoring this device.
[     6.490] (II) This device may have been added with another device file.
[     6.491] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=9 (/dev/input/event17)
[     6.491] (II) No input driver specified, ignoring this device.
[     6.491] (II) This device may have been added with another device file.
[     6.492] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=3 (/dev/input/event14)
[     6.492] (II) No input driver specified, ignoring this device.
[     6.492] (II) This device may have been added with another device file.
[     6.492] (II) config/udev: Adding input device HDA Intel HDMI HDMI/DP,pcm=8 (/dev/input/event16)
[     6.492] (II) No input driver specified, ignoring this device.
[     6.492] (II) This device may have been added with another device file.
[     6.493] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[     6.493] (II) No input driver specified, ignoring this device.
[     6.493] (II) This device may have been added with another device file.
[     6.494] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event19)
[     6.494] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[     6.494] (**) TPPS/2 IBM TrackPoint: Applying InputClass "libinput pointer catchall"
[     6.494] (II) Using input driver 'libinput' for 'TPPS/2 IBM TrackPoint'
[     6.494] (**) TPPS/2 IBM TrackPoint: always reports core events
[     6.494] (**) Option "Device" "/dev/input/event19"
[     6.494] (**) Option "_source" "server/udev"
[     6.495] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[     6.495] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer
[     6.495] (II) event19 - TPPS/2 IBM TrackPoint: device removed
[     6.538] (**) Option "config_info" "udev:/sys/devices/rmi4-00/rmi4-00.fn03/serio2/input/input15/event19"
[     6.538] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 13)
[     6.538] (**) Option "AccelerationScheme" "none"
[     6.538] (**) TPPS/2 IBM TrackPoint: (accel) selected scheme none/0
[     6.538] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[     6.538] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[     6.540] (II) event19 - TPPS/2 IBM TrackPoint: is tagged by udev as: Mouse Pointingstick
[     6.540] (II) event19 - TPPS/2 IBM TrackPoint: device is a pointer

I will downgrade the kernel and will let you know. Thanks

edit:
I downgraded the kernel to

4.19.4-arch1-1-ARCH

and now xrandr works normally.
I guess I will stay with this kernel than for a while. Thank you very much for your help seth!

Last edited by Hannibal (2019-01-13 12:05:35)

seth · 2019-01-13 13:04:58

You can install the 4.19 kernel in parallel to the 4.20 kernel (4.19 is presently the linux-lts kernel) for testing.
I'd try removing xf86-video-intel (you'll resort to the modesetting driver), the intel ddx driver is probably not interfacing correctly w/ the i915 module of 4.20.
You might want/have to raise an upstream bug w/ xf86-video-intel in case.

Hannibal · 2019-01-14 10:16:52

Hey,
indeed I should fix this properly: E.g Virtualbox needs the 4.20 kernel.

Now I have installed the following kernels

core/linux-lts 4.19.15-1

and

core/linux 4.20.1.arch1-1

and can choose in grub with which I will load linux.

So I removed the package "xf86-video-intel" but than the system couldnt start into the graphical environment (i3) (the system stops after choosing an entry in the grub menu).
Is there another package which I have to install instead to load the into my i3 environment ?

But when I get you correct, I would try out some kind of standard driver for my graphic chip, load into i3 with this one, check out if xrandr is working normally and if so, report a bug?

seth · 2019-01-14 10:42:52

There's likely some 20-intel.conf in /etc/X11/xorg.con.f.d of /usr/share/X11/xorg.conf.d provoking the (now absent) intel driver to be used.
If it's because of the ddx driver you might want to file a bug, but the intel driver is somewhat deprecated anyway.

Hannibal · 2019-01-14 23:18:14

Indeed I have this file

cat /etc/X11/xorg.conf.d/20-intel.conf 
Section "Device"
   Identifier  "Intel Graphics"
   Driver      "intel"
   Option      "TearFree"    "true"

EndSection

Has this something to do why it is not falling back to the "standard" driver?
Not sure which driver I should use instead and how this works.
Do I have to uninstall xf86...and than:

 /etc/mkinitcpio.conf
----------------------------------------
MODULES=(... i915 ...)

seth · 2019-01-15 08:25:23

/etc/X11/xorg.conf.d/20-intel.conf is the problematic one, it explicitly selects the intel driver, but you deliberately removed it w/ the xf86-video-intel package => remove that file.

The kernel module (i915) is irrelevant in this context.

Arch Linux

#1 2019-01-11 15:22:19

xrandr broker after update

#2 2019-01-11 15:58:12

Re: xrandr broker after update

#3 2019-01-12 23:53:42

Re: xrandr broker after update

#4 2019-01-13 09:00:31

Re: xrandr broker after update

#5 2019-01-13 11:51:46

Re: xrandr broker after update

#6 2019-01-13 13:04:58

Re: xrandr broker after update

#7 2019-01-14 10:16:52

Re: xrandr broker after update

#8 2019-01-14 10:42:52

Re: xrandr broker after update

#9 2019-01-14 23:18:14

Re: xrandr broker after update

#10 2019-01-15 08:25:23

Re: xrandr broker after update

Board footer