You are not logged in.

#1 2019-01-23 12:16:44

julesm
Member
Registered: 2014-07-29
Posts: 70

Cups error with network printer - Brother HL-L3210CW

I have installed a Brother network printer HL-L3210CW but I am getting an error when I try to print. The error I get (in the cups error log) is:

E [22/Jan/2019:08:11:23 +0000] Unable to open listen socket for address [v1.::1]:631 - Address family not supported by protocol.
E [22/Jan/2019:08:14:37 +0000] [cups-deviced] PID 5416 (cups-brf) stopped with status 13!
W [22/Jan/2019:08:15:22 +0000] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_HL-L3210CW_series-Gray..\' already exists
W [22/Jan/2019:08:15:22 +0000] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id \'Brother_HL-L3210CW_series-RGB..\' already exists

Now, I have another network Brother colour laser printer (HL-3150CDW) and if I use that driver with this printer, it prints fine. But I’m trying to troubleshoot the driver that should accompany this printer.

Here’s how I installed it. I got the corresponding rpm driver from Brother and I modified the PKGBUILD, which I’ll attach below. (I used the PKGBUILD from the HL-3150CDW driver as a template.) The installation worked and successfully installed the driver. So, I guess I modified the PKGBUILD correctly. But again, when I print, it looks from the cups web interface like it printed, but nothing happens – I just see the error in the log.

Again, if I modify the printer to use the other driver, it works - no errors.

Did I modify the PKGBUILD correctly?

Any ideas would be most appreciated.

Cheers,
Jules

pkgname="brother-hll3210cw"
pkgver="1.0.2"
pkgrel=2
pkgdesc="LPR and CUPS driver for the Brother HLL3210CW"
arch=('i686' 'x86_64')
url="http://solutions.brother.com/linux/en_us/"
license=('custom:brother commercial license')
depends=('cups')
install='brother-hll3210cw.install'
source=(
	"hll3210cwpdrv-1.0.2-0.i386.rpm"
	'cupswrapper-license.txt'
	'lpr-license.txt'
)
md5sums=(
	'c7e3d57cda18be69914aad496be39223'
	'97ad0cffd216059e9d1d3121899d8646'
	'5e87a3dc0f3e3438c088eda0f3565f0d'
)
if test "$CARCH" == x86_64; then
  depends+=('lib32-glibc')
fi
prepare() {
#  do not install in '/usr/local'
	if [ -d $srcdir/usr/local/Brother ]; then
		install -d $srcdir/usr/share
		mv $srcdir/usr/local/Brother/ $srcdir/usr/share/brother
		rm -rf $srcdir/usr/local
	        sed -i 's|/usr/local/Brother|/usr/share/brother|g' `grep -lr '/usr/local/Brother' ./`
        fi
# setup cups-directories
	install -d $srcdir/usr/share/cups/model
	install -d $srcdir/usr/lib/cups/filter
#  go to the cupswrapper directory and find the source file from wich to generate a ppd- and wrapper-file
	cd `find . -type d -name 'cupswrapper'`
	if [ -f cupswrapper* ]; then
		_wrapper_source=`ls cupswrapper*`
		sed -i '/^\/etc\/init.d\/cups/d' $_wrapper_source
		sed -i '/^sleep/d' $_wrapper_source
		sed -i '/^lpadmin/d' $_wrapper_source
		sed -i 's|/usr|$srcdir/usr|g' $_wrapper_source
		sed -i 's|/opt|$srcdir/opt|g' $_wrapper_source
		sed -i 's|/model/Brother|/model|g' $_wrapper_source
		sed -i 's|lpinfo|echo|g' $_wrapper_source
		export srcdir=$srcdir
		./$_wrapper_source
		sed -i 's|$srcdir||' $srcdir/usr/lib/cups/filter/*lpdwrapper*
		sed -i "s|$srcdir||" $srcdir/usr/lib/cups/filter/*lpdwrapper*
		rm $_wrapper_source
	fi
#  /etc/printcap is managed by cups
	rm `find $srcdir -type f -name 'setupPrintcap*'`
}
package() {
	cp -R $srcdir/usr $pkgdir
	if [ -d $srcdir/opt ]; then cp -R $srcdir/opt $pkgdir; fi
	install -m 644 -D cupswrapper-license.txt $pkgdir/usr/share/licenses/${pkgname}/cupswrapper-licence.txt
	install -m 644 -D lpr-license.txt $pkgdir/usr/share/licenses/${pkgname}/lpr-licence.txt
}

Offline

Board footer

Powered by FluxBB