[SOLVED] LXPanel freezes my system

Marvix · 2019-02-04 13:03:38

After a fresh installation I ecounter some problems with configuration, particuraly with lxpaenl.
I use Openbox and recall the openbox autostart file to run lxpanel.

When I loggin to my account, from tty and startx, my system is frozen and I have to reboot to change the autostart file not to start lxpanel.

If I run it from the terminal, the same happens

my .xinitrc file

exec openbox-session

my openbox/autostart file

#Disable beep sound on boo
xset b off &
xset b 0 0 0 &

## Numpad on boot
numlockx &

## Background
(sleep 1s && nitrogen --restore) &

##  Volume Icon
(sleep 1s && volumeicon) &

## Panel
## LXPanel
(sleep 1s && lxpanel) &
## Tint2
# (sleep 1s && tint2) &

## Network Manager Applet
(sleep 3s && nm-applet) &

## Power Manager
(sleep 4s && xfce4-power-manager) &

## Redshift
(sleep 4s && redshift-gtk) &

## xrandr
xrandr --output HDMI1 --mode 1920x1080 00rate 60.00 --same-as LVDS1 --off

## Disable touchpad
#/usr/bin/synclient TouchpadOff=1 &

Solution Post 5

Last edited by Marvix (2019-02-04 17:31:47)

seth · 2019-02-04 15:11:27

Try

#Disable beep sound on boo
xset b off
xset b 0 0 0

## xrandr
xrandr --output HDMI1 --mode 1920x1080 00rate 60.00 --same-as LVDS1 --off

## Disable touchpad
#/usr/bin/synclient TouchpadOff=1

## Numpad on boot
numlockx

## Background
nitrogen --restore &

## LXPanel
lxpanel &

sleep 2

##  Volume Icon
volumeicon &

## Network Manager Applet
nm-applet &

## Power Manager
xfce4-power-manager &

## Redshift
redshift-gtk &

Don't just fork everything, only long running processes. For some processes, it's pretty important to not collide.
Set the screen geometry before starting desktop & panel.
Also a bunch of forked sleeps won't get you anywhere.

Marvix · 2019-02-04 16:06:01

I changed the autostart file as you showed and I got the clutch.

I tried to get an error and I logged out and typed lxpanel in tty and I got the following

(lxpanel: 1149): Gtk WARNING **:17:56:58:216: cannot open display

I don't know if it related, I can't start gnome-terminal getting the following error

Error constructing proxy for org.gnome.Terminal:/org/gnome/Terminal/Factory0: Error calling StartServiceByName for org.gnome.Terminal: Timeout was reached

and as I made a search it appears it is a locale problem. I've tried to change it but it doesn't fix.

Hope my new details help you.

V1del · 2019-02-04 16:20:40

Your .xinitrc file is incomplete, it doesn't do quite a few necessary startup includes: It should be based on the existing template, see the second blue box

seth · 2019-02-04 16:55:29

You'll have to "export DISPLAY=:0"
In case the incomplete session is not the cause (I could see why lxpanel would time out w/o a session bus, but not why that would cause a general freeze) please post a complete journal from the boot and your xorg log.

Marvix · 2019-02-04 17:30:02

I edited the .xinitrc file with a few important files (the six lines above), which I didn't fill after installation.

As V1del proposed, I had to copy an existing template of xinit with the command

$ cp /etc/X11/xinit/xinitrc ~/.xinitrc

#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

# lxpanel &

exec openbox-session

And after all, the gnome-terminal starts now.

#!/bin/sh
if [ -d /etc/X11/xinit/xinitrc.d ] ; then
 for f in /etc/X11/xinit/xinitrc.d/?*.sh ; do
  [ -x "$f" ] && . "$f"
 done
 unset f
fi

# lxpanel &

exec openbox-session

Also gnome-terminal starts now.

The Xorg log

[   516.187] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   516.187] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[   516.187] Build Operating System: Linux Arch Linux
[   516.187] Current Operating System: Linux Marviex 4.20.6-arch1-1-ARCH #1 SMP PREEMPT Thu Jan 31 08:22:01 UTC 2019 x86_64
[   516.187] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=d586a412-63ff-2dd3-746b-de19dc507dab rw quiet
[   516.187] Build Date: 25 October 2018  04:42:32PM
[   516.187]  
[   516.187] Current version of pixman: 0.36.0
[   516.188] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   516.188] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   516.188] (==) Log file: "/home/marvix/.local/share/xorg/Xorg.2.log", Time: Mon Feb  4 17:39:47 2019
[   516.188] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   516.188] (==) No Layout section.  Using the first Screen section.
[   516.188] (==) No screen section available. Using defaults.
[   516.188] (**) |-->Screen "Default Screen Section" (0)
[   516.188] (**) |   |-->Monitor "<default monitor>"
[   516.189] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[   516.189] (==) Automatically adding devices
[   516.189] (==) Automatically enabling devices
[   516.189] (==) Automatically adding GPU devices
[   516.189] (==) Automatically binding GPU devices
[   516.189] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   516.189] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc".
[   516.189] 	Entry deleted from font path.
[   516.189] 	(Run 'mkfontdir' on "/usr/share/fonts/misc").
[   516.189] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[   516.189] 	Entry deleted from font path.
[   516.189] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   516.189] 	Entry deleted from font path.
[   516.189] (==) FontPath set to:
	/usr/share/fonts/TTF,
	/usr/share/fonts/100dpi,
	/usr/share/fonts/75dpi
[   516.189] (==) ModulePath set to "/usr/lib/xorg/modules"
[   516.189] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   516.189] (II) Module ABI versions:
[   516.189] 	X.Org ANSI C Emulation: 0.4
[   516.189] 	X.Org Video Driver: 24.0
[   516.189] 	X.Org XInput driver : 24.1
[   516.189] 	X.Org Server Extension : 10.0
[   516.190] (++) using VT number 3

[   516.193] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_35
[   516.194] (II) xfree86: Adding drm device (/dev/dri/card0)
[   516.196] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[   516.198] (--) PCI:*(0@0:2:0) 8086:0166:17aa:3977 rev 9, Mem @ 0xe0000000/4194304, 0xd0000000/268435456, I/O @ 0x00003000/64, BIOS @ 0x????????/131072
[   516.198] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[   516.198] (II) LoadModule: "glx"
[   516.198] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   516.200] (II) Module glx: vendor="X.Org Foundation"
[   516.200] 	compiled for 1.20.3, module version = 1.0.0
[   516.200] 	ABI class: X.Org Server Extension, version 10.0
[   516.200] (==) Matched intel as autoconfigured driver 0
[   516.200] (==) Matched modesetting as autoconfigured driver 1
[   516.200] (==) Matched fbdev as autoconfigured driver 2
[   516.200] (==) Matched vesa as autoconfigured driver 3
[   516.200] (==) Assigned the driver to the xf86ConfigLayout
[   516.200] (II) LoadModule: "intel"
[   516.200] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[   516.200] (II) Module intel: vendor="X.Org Foundation"
[   516.200] 	compiled for 1.20.3, module version = 2.99.917
[   516.200] 	Module class: X.Org Video Driver
[   516.200] 	ABI class: X.Org Video Driver, version 24.0
[   516.200] (II) LoadModule: "modesetting"
[   516.200] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   516.201] (II) Module modesetting: vendor="X.Org Foundation"
[   516.201] 	compiled for 1.20.3, module version = 1.20.3
[   516.201] 	Module class: X.Org Video Driver
[   516.201] 	ABI class: X.Org Video Driver, version 24.0
[   516.201] (II) LoadModule: "fbdev"
[   516.201] (WW) Warning, couldn't open module fbdev
[   516.201] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   516.201] (II) LoadModule: "vesa"
[   516.201] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[   516.201] (II) Module vesa: vendor="X.Org Foundation"
[   516.201] 	compiled for 1.20.0, module version = 2.4.0
[   516.201] 	Module class: X.Org Video Driver
[   516.201] 	ABI class: X.Org Video Driver, version 24.0
[   516.201] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[   516.201] (II) intel: Driver for Intel(R) HD Graphics
[   516.201] (II) intel: Driver for Intel(R) Iris(TM) Graphics
[   516.201] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics
[   516.201] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   516.201] (II) VESA: driver for VESA chipsets: vesa
[   516.202] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[   516.202] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20180921
[   516.202] (II) intel(0): SNA compiled from 2.99.917-859-g33ee0c3b
[   516.219] (WW) Falling back to old probe method for modesetting
[   516.219] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[   516.219] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[   516.219] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[   516.219] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[   516.219] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   516.219] (==) intel(0): RGB weight 888
[   516.219] (==) intel(0): Default visual is TrueColor
[   516.220] (II) intel(0): Output LVDS1 has no monitor section
[   516.221] (**) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[   516.221] (II) intel(0): Enabled output LVDS1
[   516.221] (II) intel(0): Output VGA1 has no monitor section
[   516.221] (II) intel(0): Enabled output VGA1
[   516.221] (II) intel(0): Output HDMI1 has no monitor section
[   516.221] (II) intel(0): Enabled output HDMI1
[   516.221] (II) intel(0): Output DP1 has no monitor section
[   516.221] (II) intel(0): Enabled output DP1
[   516.221] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[   516.222] (II) intel(0): Output VIRTUAL1 has no monitor section
[   516.222] (II) intel(0): Enabled output VIRTUAL1
[   516.222] (--) intel(0): Output LVDS1 using initial mode 1366x768 on pipe 0
[   516.222] (--) intel(0): Output HDMI1 using initial mode 1280x720 on pipe 1
[   516.222] (==) intel(0): TearFree disabled
[   516.222] (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
[   516.222] (==) intel(0): DPI set to (96, 96)
[   516.222] (II) Loading sub module "dri3"
[   516.222] (II) LoadModule: "dri3"
[   516.222] (II) Module "dri3" already built-in
[   516.222] (II) Loading sub module "dri2"
[   516.222] (II) LoadModule: "dri2"
[   516.222] (II) Module "dri2" already built-in
[   516.222] (II) Loading sub module "present"
[   516.222] (II) LoadModule: "present"
[   516.222] (II) Module "present" already built-in
[   516.222] (II) UnloadModule: "modesetting"
[   516.222] (II) Unloading modesetting
[   516.222] (II) UnloadModule: "vesa"
[   516.222] (II) Unloading vesa
[   516.222] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[   516.222] (==) intel(0): Backing store enabled
[   516.222] (==) intel(0): Silken mouse disabled
[   516.222] (II) intel(0): HW Cursor enabled
[   516.223] (==) intel(0): DPMS enabled
[   516.223] (==) intel(0): Display hotplug detection enabled
[   516.223] (II) intel(0): [DRI2] Setup complete
[   516.223] (II) intel(0): [DRI2]   DRI driver: i965
[   516.223] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[   516.223] (II) intel(0): direct rendering: DRI2 DRI3 enabled
[   516.223] (II) intel(0): hardware support for Present enabled
[   516.223] (II) Initializing extension Generic Event Extension
[   516.223] (II) Initializing extension SHAPE
[   516.223] (II) Initializing extension MIT-SHM
[   516.223] (II) Initializing extension XInputExtension
[   516.223] (II) Initializing extension XTEST
[   516.223] (II) Initializing extension BIG-REQUESTS
[   516.223] (II) Initializing extension SYNC
[   516.223] (II) Initializing extension XKEYBOARD
[   516.223] (II) Initializing extension XC-MISC
[   516.223] (II) Initializing extension SECURITY
[   516.223] (II) Initializing extension XFIXES
[   516.223] (II) Initializing extension RENDER
[   516.223] (II) Initializing extension RANDR
[   516.223] (II) Initializing extension COMPOSITE
[   516.223] (II) Initializing extension DAMAGE
[   516.223] (II) Initializing extension MIT-SCREEN-SAVER
[   516.223] (II) Initializing extension DOUBLE-BUFFER
[   516.223] (II) Initializing extension RECORD
[   516.223] (II) Initializing extension DPMS
[   516.223] (II) Initializing extension Present
[   516.223] (II) Initializing extension DRI3
[   516.223] (II) Initializing extension X-Resource
[   516.223] (II) Initializing extension XVideo
[   516.223] (II) Initializing extension XVideo-MotionCompensation
[   516.223] (II) Initializing extension GLX
[   516.236] (II) AIGLX: Loaded and initialized i965
[   516.236] (II) GLX: Initialized DRI2 GL provider for screen 0
[   516.236] (II) Initializing extension XFree86-VidModeExtension
[   516.236] (II) Initializing extension XFree86-DGA
[   516.236] (II) Initializing extension XFree86-DRI
[   516.236] (II) Initializing extension DRI2
[   516.238] (II) intel(0): switch to mode 1366x768@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[   516.253] (II) intel(0): switch to mode 1280x720@60.0 on HDMI1 using pipe 1, position (0, 0), rotation normal, reflection none
[   516.263] (II) intel(0): Setting screen physical size to 361 x 203
[   516.358] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   516.358] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   516.358] (II) LoadModule: "libinput"
[   516.358] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   516.360] (II) Module libinput: vendor="X.Org Foundation"
[   516.360] 	compiled for 1.20.1, module version = 0.28.1
[   516.360] 	Module class: X.Org XInput Driver
[   516.360] 	ABI class: X.Org XInput driver, version 24.1
[   516.360] (II) Using input driver 'libinput' for 'Power Button'
[   516.361] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 15 paused 0
[   516.361] (**) Power Button: always reports core events
[   516.361] (**) Option "Device" "/dev/input/event2"
[   516.361] (**) Option "_source" "server/udev"
[   516.363] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   516.363] (II) event2  - Power Button: device is a keyboard
[   516.364] (II) event2  - Power Button: device removed
[   516.364] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   516.364] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   516.365] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   516.365] (II) event2  - Power Button: device is a keyboard
[   516.366] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[   516.366] (**) Video Bus: Applying InputClass "libinput keyboard catchall"
[   516.366] (II) Using input driver 'libinput' for 'Video Bus'
[   516.367] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 18 paused 0
[   516.367] (**) Video Bus: always reports core events
[   516.367] (**) Option "Device" "/dev/input/event6"
[   516.367] (**) Option "_source" "server/udev"
[   516.368] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[   516.368] (II) event6  - Video Bus: device is a keyboard
[   516.368] (II) event6  - Video Bus: device removed
[   516.368] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:02/input/input7/event6"
[   516.368] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[   516.369] (II) event6  - Video Bus: is tagged by udev as: Keyboard
[   516.369] (II) event6  - Video Bus: device is a keyboard
[   516.370] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[   516.370] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   516.370] (II) Using input driver 'libinput' for 'Power Button'
[   516.371] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 19 paused 0
[   516.371] (**) Power Button: always reports core events
[   516.371] (**) Option "Device" "/dev/input/event0"
[   516.371] (**) Option "_source" "server/udev"
[   516.373] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   516.373] (II) event0  - Power Button: device is a keyboard
[   516.373] (II) event0  - Power Button: device removed
[   516.373] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/PNP0C0C:00/input/input0/event0"
[   516.373] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[   516.375] (II) event0  - Power Button: is tagged by udev as: Keyboard
[   516.375] (II) event0  - Power Button: device is a keyboard
[   516.376] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[   516.376] (II) No input driver specified, ignoring this device.
[   516.376] (II) This device may have been added with another device file.
[   516.378] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Keyboard (/dev/input/event11)
[   516.378] (**) Microsoft Microsoft® Digital Media Keyboard: Applying InputClass "libinput keyboard catchall"
[   516.378] (II) Using input driver 'libinput' for 'Microsoft Microsoft® Digital Media Keyboard'
[   516.379] (II) systemd-logind: got fd for /dev/input/event11 13:75 fd 20 paused 0
[   516.379] (**) Microsoft Microsoft® Digital Media Keyboard: always reports core events
[   516.379] (**) Option "Device" "/dev/input/event11"
[   516.379] (**) Option "_source" "server/udev"
[   516.381] (II) event11 - Microsoft Microsoft® Digital Media Keyboard: is tagged by udev as: Keyboard
[   516.381] (II) event11 - Microsoft Microsoft® Digital Media Keyboard: device is a keyboard
[   516.382] (II) event11 - Microsoft Microsoft® Digital Media Keyboard: device removed
[   516.382] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.0/0003:045E:00B4.0005/input/input15/event11"
[   516.382] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Keyboard" (type: KEYBOARD, id 9)
[   516.383] (II) event11 - Microsoft Microsoft® Digital Media Keyboard: is tagged by udev as: Keyboard
[   516.383] (II) event11 - Microsoft Microsoft® Digital Media Keyboard: device is a keyboard
[   516.384] (II) config/udev: Adding input device Microsoft Microsoft® Digital Media Keyboard (/dev/input/event12)
[   516.384] (**) Microsoft Microsoft® Digital Media Keyboard: Applying InputClass "libinput keyboard catchall"
[   516.384] (II) Using input driver 'libinput' for 'Microsoft Microsoft® Digital Media Keyboard'
[   516.385] (II) systemd-logind: got fd for /dev/input/event12 13:76 fd 21 paused 0
[   516.385] (**) Microsoft Microsoft® Digital Media Keyboard: always reports core events
[   516.385] (**) Option "Device" "/dev/input/event12"
[   516.385] (**) Option "_source" "server/udev"
[   516.386] (II) event12 - Microsoft Microsoft® Digital Media Keyboard: is tagged by udev as: Keyboard
[   516.386] (II) event12 - Microsoft Microsoft® Digital Media Keyboard: device is a keyboard
[   516.386] (II) event12 - Microsoft Microsoft® Digital Media Keyboard: device removed
[   516.386] (II) libinput: Microsoft Microsoft® Digital Media Keyboard: needs a virtual subdevice
[   516.386] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:045E:00B4.0006/input/input16/event12"
[   516.386] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Keyboard" (type: MOUSE, id 10)
[   516.386] (**) Option "AccelerationScheme" "none"
[   516.386] (**) Microsoft Microsoft® Digital Media Keyboard: (accel) selected scheme none/0
[   516.386] (**) Microsoft Microsoft® Digital Media Keyboard: (accel) acceleration factor: 2.000
[   516.386] (**) Microsoft Microsoft® Digital Media Keyboard: (accel) acceleration threshold: 4
[   516.388] (II) event12 - Microsoft Microsoft® Digital Media Keyboard: is tagged by udev as: Keyboard
[   516.388] (II) event12 - Microsoft Microsoft® Digital Media Keyboard: device is a keyboard
[   516.388] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event10)
[   516.388] (**) Logitech USB Optical Mouse: Applying InputClass "libinput pointer catchall"
[   516.388] (II) Using input driver 'libinput' for 'Logitech USB Optical Mouse'
[   516.389] (II) systemd-logind: got fd for /dev/input/event10 13:74 fd 22 paused 0
[   516.389] (**) Logitech USB Optical Mouse: always reports core events
[   516.389] (**) Option "Device" "/dev/input/event10"
[   516.389] (**) Option "_source" "server/udev"
[   516.391] (II) event10 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[   516.391] (II) event10 - Logitech USB Optical Mouse: device is a pointer
[   516.391] (II) event10 - Logitech USB Optical Mouse: device removed
[   516.391] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C077.0002/input/input12/event10"
[   516.391] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 11)
[   516.391] (**) Option "AccelerationScheme" "none"
[   516.391] (**) Logitech USB Optical Mouse: (accel) selected scheme none/0
[   516.391] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[   516.391] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[   516.392] (II) event10 - Logitech USB Optical Mouse: is tagged by udev as: Mouse
[   516.392] (II) event10 - Logitech USB Optical Mouse: device is a pointer
[   516.393] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse1)
[   516.393] (II) No input driver specified, ignoring this device.
[   516.393] (II) This device may have been added with another device file.
[   516.393] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event9)
[   516.393] (II) No input driver specified, ignoring this device.
[   516.393] (II) This device may have been added with another device file.
[   516.393] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[   516.393] (II) No input driver specified, ignoring this device.
[   516.393] (II) This device may have been added with another device file.
[   516.394] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event8)
[   516.394] (II) No input driver specified, ignoring this device.
[   516.394] (II) This device may have been added with another device file.
[   516.394] (II) config/udev: Adding input device Ideapad extra buttons (/dev/input/event4)
[   516.394] (**) Ideapad extra buttons: Applying InputClass "libinput keyboard catchall"
[   516.394] (II) Using input driver 'libinput' for 'Ideapad extra buttons'
[   516.395] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 23 paused 0
[   516.395] (**) Ideapad extra buttons: always reports core events
[   516.395] (**) Option "Device" "/dev/input/event4"
[   516.395] (**) Option "_source" "server/udev"
[   516.396] (II) event4  - Ideapad extra buttons: is tagged by udev as: Keyboard
[   516.396] (II) event4  - Ideapad extra buttons: device is a keyboard
[   516.396] (II) event4  - Ideapad extra buttons: device removed
[   516.396] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1f.0/PNP0C09:00/VPC2004:00/input/input6/event4"
[   516.396] (II) XINPUT: Adding extended input device "Ideapad extra buttons" (type: KEYBOARD, id 12)
[   516.398] (II) event4  - Ideapad extra buttons: is tagged by udev as: Keyboard
[   516.398] (II) event4  - Ideapad extra buttons: device is a keyboard
[   516.398] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[   516.398] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[   516.398] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[   516.399] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 24 paused 0
[   516.399] (**) AT Translated Set 2 keyboard: always reports core events
[   516.399] (**) Option "Device" "/dev/input/event3"
[   516.399] (**) Option "_source" "server/udev"
[   516.400] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   516.400] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[   516.401] (II) event3  - AT Translated Set 2 keyboard: device removed
[   516.401] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[   516.401] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[   516.402] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[   516.402] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[   516.403] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/event5)
[   516.403] (**) ETPS/2 Elantech Touchpad: Applying InputClass "libinput touchpad catchall"
[   516.403] (II) Using input driver 'libinput' for 'ETPS/2 Elantech Touchpad'
[   516.404] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 25 paused 0
[   516.404] (**) ETPS/2 Elantech Touchpad: always reports core events
[   516.404] (**) Option "Device" "/dev/input/event5"
[   516.404] (**) Option "_source" "server/udev"
[   516.405] (II) event5  - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[   516.406] (II) event5  - ETPS/2 Elantech Touchpad: device is a touchpad
[   516.406] (II) event5  - ETPS/2 Elantech Touchpad: device removed
[   516.406] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input5/event5"
[   516.406] (II) XINPUT: Adding extended input device "ETPS/2 Elantech Touchpad" (type: TOUCHPAD, id 14)
[   516.407] (**) Option "AccelerationScheme" "none"
[   516.407] (**) ETPS/2 Elantech Touchpad: (accel) selected scheme none/0
[   516.407] (**) ETPS/2 Elantech Touchpad: (accel) acceleration factor: 2.000
[   516.407] (**) ETPS/2 Elantech Touchpad: (accel) acceleration threshold: 4
[   516.408] (II) event5  - ETPS/2 Elantech Touchpad: is tagged by udev as: Touchpad
[   516.409] (II) event5  - ETPS/2 Elantech Touchpad: device is a touchpad
[   516.409] (II) config/udev: Adding input device ETPS/2 Elantech Touchpad (/dev/input/mouse0)
[   516.409] (II) No input driver specified, ignoring this device.
[   516.409] (II) This device may have been added with another device file.
[   516.430] (**) Microsoft Microsoft® Digital Media Keyboard: Applying InputClass "libinput keyboard catchall"
[   516.430] (II) Using input driver 'libinput' for 'Microsoft Microsoft® Digital Media Keyboard'
[   516.430] (II) systemd-logind: returning pre-existing fd for /dev/input/event12 13:76
[   516.430] (**) Microsoft Microsoft® Digital Media Keyboard: always reports core events
[   516.430] (**) Option "Device" "/dev/input/event12"
[   516.430] (**) Option "_source" "_driver/libinput"
[   516.430] (II) libinput: Microsoft Microsoft® Digital Media Keyboard: is a virtual subdevice
[   516.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb2/2-2/2-2:1.1/0003:045E:00B4.0006/input/input16/event12"
[   516.430] (II) XINPUT: Adding extended input device "Microsoft Microsoft® Digital Media Keyboard" (type: KEYBOARD, id 15)
[   518.224] (II) intel(0): EDID vendor "CMO", prod id 5543
[   518.224] (II) intel(0): Printing DDC gathered Modelines:
[   518.224] (II) intel(0): Modeline "1366x768"x0.0   69.30  1366 1382 1416 1466  768 770 776 788 -hsync -vsync (47.3 kHz eP)
[   543.380] (**) Option "fd" "15"
[   543.380] (II) event2  - Power Button: device removed
[   543.380] (**) Option "fd" "18"
[   543.380] (II) event6  - Video Bus: device removed
[   543.380] (**) Option "fd" "19"
[   543.380] (II) event0  - Power Button: device removed
[   543.380] (**) Option "fd" "20"
[   543.380] (II) event11 - Microsoft Microsoft® Digital Media Keyboard: device removed
[   543.381] (**) Option "fd" "21"
[   543.381] (**) Option "fd" "22"
[   543.381] (II) event10 - Logitech USB Optical Mouse: device removed
[   543.381] (**) Option "fd" "23"
[   543.381] (II) event4  - Ideapad extra buttons: device removed
[   543.381] (**) Option "fd" "24"
[   543.381] (II) event3  - AT Translated Set 2 keyboard: device removed
[   543.381] (**) Option "fd" "25"
[   543.381] (II) event5  - ETPS/2 Elantech Touchpad: device removed
[   543.381] (**) Option "fd" "21"
[   543.381] (II) event12 - Microsoft Microsoft® Digital Media Keyboard: device removed
[   543.381] (II) AIGLX: Suspending AIGLX clients for VT switch
[   543.452] (II) systemd-logind: got pause for 13:64
[   543.452] (II) systemd-logind: got pause for 13:74
[   543.452] (II) systemd-logind: got pause for 13:66
[   543.452] (II) systemd-logind: got pause for 13:67
[   543.452] (II) systemd-logind: got pause for 13:76
[   543.452] (II) systemd-logind: got pause for 13:70
[   543.452] (II) systemd-logind: got pause for 226:0
[   543.452] (II) systemd-logind: got pause for 13:75
[   543.452] (II) systemd-logind: got pause for 13:69
[   543.452] (II) systemd-logind: got pause for 13:68
[   550.241] (II) UnloadModule: "libinput"
[   550.241] (II) systemd-logind: not releasing fd for 13:76, still in use
[   550.241] (II) UnloadModule: "libinput"
[   550.241] (II) systemd-logind: releasing fd for 13:69
[   550.299] (II) UnloadModule: "libinput"
[   550.299] (II) systemd-logind: releasing fd for 13:67
[   550.360] (II) UnloadModule: "libinput"
[   550.361] (II) systemd-logind: releasing fd for 13:68
[   550.426] (II) UnloadModule: "libinput"
[   550.427] (II) systemd-logind: releasing fd for 13:74
[   550.559] (II) UnloadModule: "libinput"
[   550.559] (II) systemd-logind: releasing fd for 13:76
[   550.649] (II) UnloadModule: "libinput"
[   550.649] (II) systemd-logind: releasing fd for 13:75
[   550.735] (II) UnloadModule: "libinput"
[   550.735] (II) systemd-logind: releasing fd for 13:64
[   550.839] (II) UnloadModule: "libinput"
[   550.839] (II) systemd-logind: releasing fd for 13:70
[   550.928] (II) UnloadModule: "libinput"
[   550.928] (II) systemd-logind: releasing fd for 13:66
[   551.051] (EE) intel(0): Failed to set backlight intel_backlight for output LVDS1, disabling
[   551.054] (WW) xf86CloseConsole: KDSETMODE failed: Input/output error
[   551.054] (WW) xf86CloseConsole: VT_GETMODE failed: Input/output error
[   551.054] (WW) xf86CloseConsole: VT_ACTIVATE failed: Input/output error
[   551.092] (II) Server terminated successfully (0). Closing log file.

seth what do mean to "export DISPLAY=:0"?
Can you please tell me, what do those commands do, and are so important, in xinitrc?

And an honest thank you again. Unfortunately I don't have much time to learn Arch, that's why I'm still newbie, even I use it for six years.

Last edited by Marvix (2019-02-04 17:33:35)

seth · 2019-02-04 17:36:43

They source the stuff in /etc/X11/xinit/xinitrc.d/, most critically 50-systemd-user.sh
"man export", the DISPLAY environment tells X11 clients which server to talk to.

You marked this solved and suggest that gnome-terminal starts, but what about the freeze? lxpanel is at least still commented in your xinitrc…

Marvix · 2019-02-04 17:48:09

Sorry for my rush, I posted even I when I was testing.

The system doesn't freeze anymore, even in the loggin of tty with startx, even when I recall from the terminal.

It doesn't matter where the lxpanel is writen, in ~/.xinitrc or in the ~/.config/openbox/autostart as long as the first 6 lines are in .xinitrc.

Apparently the ~/.xinitrc has a dependency with locale and caused the gnome-terminal to function.

Arch Linux

#1 2019-02-04 13:03:38

[SOLVED] LXPanel freezes my system

#2 2019-02-04 15:11:27

Re: [SOLVED] LXPanel freezes my system

#3 2019-02-04 16:06:01

Re: [SOLVED] LXPanel freezes my system

#4 2019-02-04 16:20:40

Re: [SOLVED] LXPanel freezes my system

#5 2019-02-04 16:55:29

Re: [SOLVED] LXPanel freezes my system

#6 2019-02-04 17:30:02

Re: [SOLVED] LXPanel freezes my system

#7 2019-02-04 17:36:43

Re: [SOLVED] LXPanel freezes my system

#8 2019-02-04 17:48:09

Re: [SOLVED] LXPanel freezes my system

Board footer