You are not logged in.

#1 2019-02-09 08:32:07

warezIbanez
Member
Registered: 2017-03-27
Posts: 14

[Solved]Nvidia kernel module not receiving interrupts generated by GPU

Hello there, I'm looking for some help with an older Nvidia graphics card, the Geforce 8400 GS with a recent installation of Xorg and arch on the system in general. I had installed the following associated packages from pacman:

  • nvidia-340xx

  • xorg-server

  • xorg-xinit

  • xorg-twm

  • xorg-server-common

  • lightdm

  • lightdm-gtk-greeter

  • cinnamon

  • muffin

  • nemo

However, upon enabling the LightDM service and restarting the system, I was treated to a blinking cursor, and so I went and disabled the service and proceeded to run startx. Here are the results of that:

[  3073.469] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[  3073.568] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[  3073.853] Build Operating System: Linux Arch Linux
[  3073.953] Current Operating System: Linux archAnyone 4.20.6-arch1-1-ARCH #1 SMP PREEMPT Thu Jan 31 08:22:01 UTC 2019 x86_64
[  3073.954] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=2f2ce450-0c93-4714-b72e-c5d08eda7b5d rw nvidia-drm.modeset=1 quiet nvidia-drm.modeset=1
[  3074.164] Build Date: 25 October 2018  04:42:32PM
[  3074.267]  
[  3074.370] Current version of pixman: 0.36.0
[  3074.578] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[  3074.578] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[  3074.999] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Feb  8 12:53:56 2019
[  3075.105] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[  3075.105] (==) No Layout section.  Using the first Screen section.
[  3075.105] (==) No screen section available. Using defaults.
[  3075.105] (**) |-->Screen "Default Screen Section" (0)
[  3075.105] (**) |   |-->Monitor "<default monitor>"
[  3075.106] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[  3075.106] (==) Automatically adding devices
[  3075.106] (==) Automatically enabling devices
[  3075.106] (==) Automatically adding GPU devices
[  3075.106] (==) Automatically binding GPU devices
[  3075.106] (==) Max clients allowed: 256, resource mask: 0x1fffff
[  3075.106] (WW) The directory "/usr/share/fonts/misc" does not exist.
[  3075.106] 	Entry deleted from font path.
[  3075.106] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[  3075.106] 	Entry deleted from font path.
[  3075.106] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[  3075.106] 	Entry deleted from font path.
[  3075.106] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[  3075.106] 	Entry deleted from font path.
[  3075.106] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[  3075.106] 	Entry deleted from font path.
[  3075.106] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[  3075.106] 	Entry deleted from font path.
[  3075.106] (==) FontPath set to:
	
[  3075.106] (==) ModulePath set to "/usr/lib/xorg/modules"
[  3075.106] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[  3075.106] (II) Module ABI versions:
[  3075.106] 	X.Org ANSI C Emulation: 0.4
[  3075.106] 	X.Org Video Driver: 24.0
[  3075.106] 	X.Org XInput driver : 24.1
[  3075.106] 	X.Org Server Extension : 10.0
[  3075.108] (++) using VT number 1

[  3075.111] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[  3075.112] (II) xfree86: Adding drm device (/dev/dri/card0)
[  3075.114] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[  3075.118] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[  3075.118] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[  3075.122] (--) PCI:*(2@0:0:0) 10de:06e4:1462:1163 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[  3075.122] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[  3075.122] (II) LoadModule: "glx"
[  3075.122] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[  3075.155] (II) Module glx: vendor="NVIDIA Corporation"
[  3075.155] 	compiled for 4.0.2, module version = 1.0.0
[  3075.155] 	Module class: X.Org Server Extension
[  3075.155] (II) NVIDIA GLX Module  340.107  Thu May 24 21:40:32 PDT 2018
[  3075.155] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[  3075.155] 	loading driver: nvidia
[  3075.155] (==) Matched nvidia as autoconfigured driver 0
[  3075.155] (==) Matched nouveau as autoconfigured driver 1
[  3075.155] (==) Matched nv as autoconfigured driver 2
[  3075.155] (==) Matched modesetting as autoconfigured driver 3
[  3075.155] (==) Matched fbdev as autoconfigured driver 4
[  3075.155] (==) Matched vesa as autoconfigured driver 5
[  3075.155] (==) Assigned the driver to the xf86ConfigLayout
[  3075.155] (II) LoadModule: "nvidia"
[  3075.156] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[  3075.157] (II) Module nvidia: vendor="NVIDIA Corporation"
[  3075.157] 	compiled for 4.0.2, module version = 1.0.0
[  3075.157] 	Module class: X.Org Video Driver
[  3075.157] (II) LoadModule: "nouveau"
[  3075.157] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[  3075.164] (II) Module nouveau: vendor="X.Org Foundation"
[  3075.164] 	compiled for 1.20.3, module version = 1.0.16
[  3075.164] 	Module class: X.Org Video Driver
[  3075.164] 	ABI class: X.Org Video Driver, version 24.0
[  3075.164] (II) LoadModule: "nv"
[  3075.165] (WW) Warning, couldn't open module nv
[  3075.165] (EE) Failed to load module "nv" (module does not exist, 0)
[  3075.165] (II) LoadModule: "modesetting"
[  3075.165] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[  3075.166] (II) Module modesetting: vendor="X.Org Foundation"
[  3075.166] 	compiled for 1.20.3, module version = 1.20.3
[  3075.166] 	Module class: X.Org Video Driver
[  3075.166] 	ABI class: X.Org Video Driver, version 24.0
[  3075.166] (II) LoadModule: "fbdev"
[  3075.167] (WW) Warning, couldn't open module fbdev
[  3075.167] (EE) Failed to load module "fbdev" (module does not exist, 0)
[  3075.167] (II) LoadModule: "vesa"
[  3075.168] (WW) Warning, couldn't open module vesa
[  3075.168] (EE) Failed to load module "vesa" (module does not exist, 0)
[  3075.168] (II) NVIDIA dlloader X Driver  340.107  Thu May 24 21:18:05 PDT 2018
[  3075.168] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[  3075.168] (II) NOUVEAU driver 
[  3075.168] (II) NOUVEAU driver for NVIDIA chipset families :
[  3075.168] 	RIVA TNT            (NV04)
[  3075.168] 	RIVA TNT2           (NV05)
[  3075.168] 	GeForce 256         (NV10)
[  3075.168] 	GeForce 2           (NV11, NV15)
[  3075.168] 	GeForce 4MX         (NV17, NV18)
[  3075.169] 	GeForce 3           (NV20)
[  3075.169] 	GeForce 4Ti         (NV25, NV28)
[  3075.169] 	GeForce FX          (NV3x)
[  3075.169] 	GeForce 6           (NV4x)
[  3075.169] 	GeForce 7           (G7x)
[  3075.169] 	GeForce 8           (G8x)
[  3075.169] 	GeForce 9           (G9x)
[  3075.169] 	GeForce GTX 2xx/3xx (GT2xx)
[  3075.169] 	GeForce GTX 4xx/5xx (GFxxx)
[  3075.170] 	GeForce GTX 6xx/7xx (GKxxx)
[  3075.170] 	GeForce GTX 9xx     (GMxxx)
[  3075.170] 	GeForce GTX 10xx    (GPxxx)
[  3075.170] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[  3075.170] (II) Loading sub module "fb"
[  3075.170] (II) LoadModule: "fb"
[  3075.170] (II) Loading /usr/lib/xorg/modules/libfb.so
[  3075.171] (II) Module fb: vendor="X.Org Foundation"
[  3075.171] 	compiled for 1.20.3, module version = 1.0.0
[  3075.171] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  3075.171] (WW) Unresolved symbol: fbGetGCPrivateKey
[  3075.171] (II) Loading sub module "wfb"
[  3075.171] (II) LoadModule: "wfb"
[  3075.171] (II) Loading /usr/lib/xorg/modules/libwfb.so
[  3075.171] (II) Module wfb: vendor="X.Org Foundation"
[  3075.172] 	compiled for 1.20.3, module version = 1.0.0
[  3075.172] 	ABI class: X.Org ANSI C Emulation, version 0.4
[  3075.172] (II) Loading sub module "ramdac"
[  3075.172] (II) LoadModule: "ramdac"
[  3075.172] (II) Module "ramdac" already built-in
[  3075.172] (WW) Falling back to old probe method for modesetting
[  3075.173] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[  3075.173] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[  3075.173] (==) NVIDIA(0): RGB weight 888
[  3075.173] (==) NVIDIA(0): Default visual is TrueColor
[  3075.173] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[  3075.173] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[  3075.173] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[  3075.173] (**) NVIDIA(0): Enabling 2D acceleration
[  3079.738] (EE) NVIDIA(GPU-0): The NVIDIA kernel module does not appear to be receiving
[  3079.738] (EE) NVIDIA(GPU-0):     interrupts generated by the NVIDIA GPU at PCI:2:0:0. 
[  3079.738] (EE) NVIDIA(GPU-0):     Please see Chapter 8: Common Problems in the README for
[  3079.738] (EE) NVIDIA(GPU-0):     additional information.
[  3079.738] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[  3079.738] (EE) NVIDIA(0): Failing initialization of X screen 0
[  3079.739] (II) UnloadModule: "nvidia"
[  3079.739] (II) UnloadSubModule: "wfb"
[  3079.739] (II) UnloadSubModule: "fb"
[  3079.739] (EE) Screen(s) found, but none have a usable configuration.
[  3079.739] (EE) 
Fatal server error:
[  3079.739] (EE) no screens found(EE) 
[  3079.739] (EE) 
Please consult the The X.Org Foundation support 
	 at http://wiki.x.org
 for help. 
[  3079.739] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[  3079.739] (EE) 
[  3080.110] (EE) Server terminated with error (1). Closing log file.

Source

Looking at the section about enabling KMS for Nvidia cards here, it states to add the kernel parameter and four modules to the appropriate areas.

Now I believe I had done so in the proper areas, where I altered the following at /etc/default/grub and then generated a new grub.cfg by way of grub-mkconfig -o /boot/grub/grub.cfg :

GRUB_CMDLINE_LINUX_DEFAULT="quiet nvidia-drm.modeset=1"
GRUB_CMDLINE_LINUX="nvidia-drm.modeset=1"

I had also altered the following at /etc/mkinitcpio.conf and ran mkinitcpio -p linux (but had received a warning stating nvidia_modeset and nvidia_drm could not be found):

MODULES=(nvidia nvidia_modeset nvidia_uvm nvidia_drm)

After editing those files and generating the resulting files from there, I still get the same errors in the Xorg log. Furthermore, I installed the xf86-video-nouveau package with no success to being able to use startx properly.

Please let me know where I may be going wrong here, this is my first time working with an nvidia card and not an integrated graphics chip.

Last edited by warezIbanez (2019-02-10 10:32:07)

Offline

#2 2019-02-09 09:55:47

loqs
Member
Registered: 2014-03-06
Posts: 7,661

Re: [Solved]Nvidia kernel module not receiving interrupts generated by GPU

Offline

#3 2019-02-09 10:00:41

seth
Member
Registered: 2012-09-03
Posts: 10,942

Re: [Solved]Nvidia kernel module not receiving interrupts generated by GPU

If you intend to keep using the nvidia blob, loose xf86-video-nouveau.
Also post the outputs of "lsmod" and "nvidia-smi".
Try the lts kernel, don't forget to install nvidia-340xx-lts.
Ensure you installed nvidia-340xx-utils and not eg. nvidia-utils ("pacman -Qs nvidia")

drm modesetting was introduced w/ 346.something and isn't available for your GPU/driver.

Offline

#4 2019-02-10 05:00:43

warezIbanez
Member
Registered: 2017-03-27
Posts: 14

Re: [Solved]Nvidia kernel module not receiving interrupts generated by GPU

seth wrote:

If you intend to keep using the nvidia blob, loose xf86-video-nouveau.
Also post the outputs of "lsmod" and "nvidia-smi".
Try the lts kernel, don't forget to install nvidia-340xx-lts.
Ensure you installed nvidia-340xx-utils and not eg. nvidia-utils ("pacman -Qs nvidia")

drm modesetting was introduced w/ 346.something and isn't available for your GPU/driver.

logs wrote:

link

Thanks for the quick response, guys. Let me run through what I've done so far now.

I've installed linux-lts, nvidia-340xx-lts & -340xx-lts-utils, removed nouveau, nvidia-340xx and dependencies, generated another grub config, and ran the lts kernel. No luck yet, same error.

Here are the results from lsmod:

Module                  Size  Used by
dm_mod                155648  0
fuse                  118784  1
btrfs                1376256  0
xor                    24576  1 btrfs
raid6_pq              122880  1 btrfs
ufs                    86016  0
hfsplus               114688  0
hfs                    69632  0
minix                  40960  0
ntfs                  225280  0
vfat                   20480  0
msdos                  20480  0
fat                    81920  2 msdos,vfat
jfs                   208896  0
xfs                  1626112  0
libcrc32c              16384  2 btrfs,xfs
nvidia              10584064  0
snd_hda_codec_realtek   118784  1
snd_hda_codec_generic    86016  1 snd_hda_codec_realtek
snd_hda_intel          45056  0
snd_hda_codec         151552  3 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec_realtek
snd_hda_core           94208  4 snd_hda_codec_generic,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               131072  3 snd_hda_intel,snd_hda_codec,snd_hda_core
mousedev               24576  0
ppdev                  20480  0
snd_timer              36864  1 snd_pcm
snd                    98304  7 snd_hda_codec_generic,snd_hwdep,snd_hda_intel,snd_hda_codec,snd_hda_codec_realtek,snd_timer,snd_pcm
intel_powerclamp       16384  0
soundcore              16384  1 snd
via_rhine              40960  0
input_leds             16384  0
pcspkr                 16384  0
i2c_viapro             16384  0
mii                    16384  1 via_rhine
parport_pc             49152  0
parport                57344  2 parport_pc,ppdev
drm                   495616  2 nvidia
evdev                  24576  4
via_agp                16384  1
mac_hid                16384  0
agpgart                49152  2 via_agp,drm
ip_tables              28672  0
x_tables               45056  1 ip_tables
ext4                  733184  1
crc32c_generic         16384  3
crc16                  16384  1 ext4
mbcache                16384  1 ext4
jbd2                  122880  1 ext4
fscrypto               32768  1 ext4
uas                    28672  0
usb_storage            73728  1 uas
sr_mod                 28672  0
cdrom                  69632  1 sr_mod
sd_mod                 61440  3
ata_generic            16384  0
pata_acpi              16384  0
hid_generic            16384  0
usbhid                 57344  0
hid                   139264  2 usbhid,hid_generic
serio_raw              16384  0
atkbd                  32768  0
libps2                 16384  1 atkbd
firewire_ohci          49152  0
pata_via               20480  2
sata_via               20480  0
uhci_hcd               49152  0
libata                278528  4 pata_via,sata_via,pata_acpi,ata_generic
firewire_core          77824  1 firewire_ohci
crc_itu_t              16384  1 firewire_core
scsi_mod              253952  5 sd_mod,usb_storage,uas,libata,sr_mod
ehci_pci               16384  0
ehci_hcd               94208  1 ehci_pci
i8042                  32768  0
floppy                 86016  0
serio                  28672  4 serio_raw,atkbd,i8042

Source

Here are the results from nvidia-smi:

Unable to determine the device handle for GPU 0000:02:00.0: The NVIDIA kernel module detected an issue with GPU interrupts.Consult the "Common Problems" Chapter of the NVIDIA Driver README for
details and steps that can be taken to resolve this issue.

Source

The next steps I took were to use the following kernel parameters:

  • pci=noacpi - couldn't even get to a login prompt with this

  • pci=biosirq - Got to the login prompt & further, but startx still failed and gave the same error

  • noapic - Same results as above

  • acpi=off - got to the login prompt, but no devices like keyboard could be used.

From there, I shut the system down completely, opened up the case and removed a PCI card with firewire ports on it, resecured the casing and started things back up without the kernel parameters to no avail.

It looks like I may have made some progress though. After looking into MSI Interrupts, I added the following line to /etc/modprobe.d/nvdimm-security.conf :

[    41.091] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[    41.093] 
X.Org X Server 1.20.3
X Protocol Version 11, Revision 0
[    41.099] Build Operating System: Linux Arch Linux
[    41.105] Current Operating System: Linux archserver 4.19.20-1-lts #1 SMP Wed Feb 6 21:46:51 CET 2019 x86_64
[    41.106] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-lts root=UUID=94151b5b-c472-4b6a-946a-a816424a7716 rw quiet
[    41.115] Build Date: 25 October 2018  04:42:32PM
[    41.116]  
[    41.118] Current version of pixman: 0.36.0
[    41.125] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    41.126] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    41.144] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Feb  9 17:35:19 2019
[    41.293] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    41.331] (==) No Layout section.  Using the first Screen section.
[    41.331] (==) No screen section available. Using defaults.
[    41.331] (**) |-->Screen "Default Screen Section" (0)
[    41.331] (**) |   |-->Monitor "<default monitor>"
[    41.334] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    41.334] (==) Automatically adding devices
[    41.334] (==) Automatically enabling devices
[    41.334] (==) Automatically adding GPU devices
[    41.334] (==) Automatically binding GPU devices
[    41.334] (==) Max clients allowed: 256, resource mask: 0x1fffff
[    41.521] (WW) The directory "/usr/share/fonts/misc" does not exist.
[    41.521] 	Entry deleted from font path.
[    41.521] (WW) The directory "/usr/share/fonts/TTF" does not exist.
[    41.521] 	Entry deleted from font path.
[    41.521] (WW) The directory "/usr/share/fonts/OTF" does not exist.
[    41.521] 	Entry deleted from font path.
[    41.521] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[    41.521] 	Entry deleted from font path.
[    41.522] (WW) The directory "/usr/share/fonts/100dpi" does not exist.
[    41.522] 	Entry deleted from font path.
[    41.522] (WW) The directory "/usr/share/fonts/75dpi" does not exist.
[    41.522] 	Entry deleted from font path.
[    41.522] (==) FontPath set to:
	
[    41.522] (==) ModulePath set to "/usr/lib/xorg/modules"
[    41.522] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    41.522] (II) Module ABI versions:
[    41.522] 	X.Org ANSI C Emulation: 0.4
[    41.522] 	X.Org Video Driver: 24.0
[    41.522] 	X.Org XInput driver : 24.1
[    41.522] 	X.Org Server Extension : 10.0
[    41.523] (++) using VT number 1

[    41.527] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[    41.528] (II) xfree86: Adding drm device (/dev/dri/card0)
[    41.530] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[    41.536] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[    41.536] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[    41.540] (--) PCI:*(2@0:0:0) 10de:06e4:1462:1163 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000ec00/128, BIOS @ 0x????????/131072
[    41.540] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    41.541] (II) LoadModule: "glx"
[    41.579] (II) Loading /usr/lib/nvidia/xorg/libglx.so
[    44.607] (II) Module glx: vendor="NVIDIA Corporation"
[    44.607] 	compiled for 4.0.2, module version = 1.0.0
[    44.607] 	Module class: X.Org Server Extension
[    44.619] (II) NVIDIA GLX Module  340.107  Thu May 24 21:40:32 PDT 2018
[    44.626] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[    44.626] 	loading driver: nvidia
[    44.626] (==) Matched nvidia as autoconfigured driver 0
[    44.626] (==) Matched nouveau as autoconfigured driver 1
[    44.626] (==) Matched nv as autoconfigured driver 2
[    44.626] (==) Matched modesetting as autoconfigured driver 3
[    44.626] (==) Matched fbdev as autoconfigured driver 4
[    44.626] (==) Matched vesa as autoconfigured driver 5
[    44.626] (==) Assigned the driver to the xf86ConfigLayout
[    44.626] (II) LoadModule: "nvidia"
[    44.646] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[    44.774] (II) Module nvidia: vendor="NVIDIA Corporation"
[    44.774] 	compiled for 4.0.2, module version = 1.0.0
[    44.774] 	Module class: X.Org Video Driver
[    44.782] (II) LoadModule: "nouveau"
[    44.784] (WW) Warning, couldn't open module nouveau
[    44.784] (EE) Failed to load module "nouveau" (module does not exist, 0)
[    44.784] (II) LoadModule: "nv"
[    44.784] (WW) Warning, couldn't open module nv
[    44.784] (EE) Failed to load module "nv" (module does not exist, 0)
[    44.784] (II) LoadModule: "modesetting"
[    44.785] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    44.830] (II) Module modesetting: vendor="X.Org Foundation"
[    44.830] 	compiled for 1.20.3, module version = 1.20.3
[    44.830] 	Module class: X.Org Video Driver
[    44.831] 	ABI class: X.Org Video Driver, version 24.0
[    44.831] (II) LoadModule: "fbdev"
[    44.831] (WW) Warning, couldn't open module fbdev
[    44.831] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    44.831] (II) LoadModule: "vesa"
[    44.832] (WW) Warning, couldn't open module vesa
[    44.832] (EE) Failed to load module "vesa" (module does not exist, 0)
[    44.832] (II) NVIDIA dlloader X Driver  340.107  Thu May 24 21:18:05 PDT 2018
[    44.832] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    44.834] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    44.855] (II) Loading sub module "fb"
[    44.855] (II) LoadModule: "fb"
[    44.856] (II) Loading /usr/lib/xorg/modules/libfb.so
[    44.879] (II) Module fb: vendor="X.Org Foundation"
[    44.879] 	compiled for 1.20.3, module version = 1.0.0
[    44.879] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    44.879] (WW) Unresolved symbol: fbGetGCPrivateKey
[    44.879] (II) Loading sub module "wfb"
[    44.879] (II) LoadModule: "wfb"
[    44.880] (II) Loading /usr/lib/xorg/modules/libwfb.so
[    44.890] (II) Module wfb: vendor="X.Org Foundation"
[    44.890] 	compiled for 1.20.3, module version = 1.0.0
[    44.890] 	ABI class: X.Org ANSI C Emulation, version 0.4
[    44.890] (II) Loading sub module "ramdac"
[    44.890] (II) LoadModule: "ramdac"
[    44.890] (II) Module "ramdac" already built-in
[    44.931] (WW) Falling back to old probe method for modesetting
[    44.932] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    44.932] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    44.932] (==) NVIDIA(0): RGB weight 888
[    44.932] (==) NVIDIA(0): Default visual is TrueColor
[    44.932] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    44.933] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[    44.933] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[    44.935] (**) NVIDIA(0): Enabling 2D acceleration
[    45.667] (II) NVIDIA(0): Display (LG Electronics 22EA53 (DFP-0)) does not support
[    45.667] (II) NVIDIA(0):     NVIDIA 3D Vision stereo.
[    45.667] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[    45.675] (II) NVIDIA(0): NVIDIA GPU GeForce 8400 GS (G98) at PCI:2:0:0 (GPU-0)
[    45.675] (--) NVIDIA(0): Memory: 524288 kBytes
[    45.675] (--) NVIDIA(0): VideoBIOS: 62.98.12.00.35
[    45.675] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    45.679] (--) NVIDIA(0): Valid display device(s) on GeForce 8400 GS at PCI:2:0:0
[    45.679] (--) NVIDIA(0):     CRT-0
[    45.679] (--) NVIDIA(0):     CRT-1
[    45.679] (--) NVIDIA(0):     TV-0
[    45.679] (--) NVIDIA(0):     LG Electronics 22EA53 (DFP-0) (boot, connected)
[    45.679] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[    45.679] (--) NVIDIA(GPU-0): CRT-1: 400.0 MHz maximum pixel clock
[    45.679] (--) NVIDIA(GPU-0): TV-0: 400.0 MHz maximum pixel clock
[    45.680] (--) NVIDIA(0): LG Electronics 22EA53 (DFP-0): Internal TMDS
[    45.680] (--) NVIDIA(GPU-0): LG Electronics 22EA53 (DFP-0): 330.0 MHz maximum pixel clock
[    45.680] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    45.680] (**) NVIDIA(0):     device LG Electronics 22EA53 (DFP-0) (Using EDID
[    45.680] (**) NVIDIA(0):     frequencies has been enabled on all display devices.)
[    45.684] (==) NVIDIA(0): 
[    45.684] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    45.684] (==) NVIDIA(0):     will be used as the requested mode.
[    45.684] (==) NVIDIA(0): 
[    45.684] (II) NVIDIA(0): Validated MetaModes:
[    45.684] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[    45.684] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[    45.708] (--) NVIDIA(0): DPI set to (101, 101); computed from "UseEdidDpi" X config
[    45.708] (--) NVIDIA(0):     option
[    45.708] (II) UnloadModule: "modesetting"
[    45.708] (II) Unloading modesetting
[    45.709] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[    45.720] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    45.720] (II) NVIDIA(0):     may not be running or the "AcpidSocketPath" X
[    45.720] (II) NVIDIA(0):     configuration option may not be set correctly.  When the
[    45.720] (II) NVIDIA(0):     ACPI event daemon is available, the NVIDIA X driver will
[    45.720] (II) NVIDIA(0):     try to use it to receive ACPI event notifications.  For
[    45.720] (II) NVIDIA(0):     details, please see the "ConnectToAcpid" and
[    45.720] (II) NVIDIA(0):     "AcpidSocketPath" X configuration options in Appendix B: X
[    45.720] (II) NVIDIA(0):     Config Options in the README.
[    45.722] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[    45.863] (==) NVIDIA(0): Disabling shared memory pixmaps
[    45.863] (==) NVIDIA(0): Backing store enabled
[    45.864] (==) NVIDIA(0): Silken mouse disabled
[    45.864] (==) NVIDIA(0): DPMS enabled
[    45.905] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[    45.905] (II) Loading sub module "dri2"
[    45.905] (II) LoadModule: "dri2"
[    45.905] (II) Module "dri2" already built-in
[    45.905] (II) NVIDIA(0): [DRI2] Setup complete
[    45.905] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[    45.907] (II) Initializing extension Generic Event Extension
[    45.907] (II) Initializing extension SHAPE
[    45.907] (II) Initializing extension MIT-SHM
[    45.907] (II) Initializing extension XInputExtension
[    45.907] (II) Initializing extension XTEST
[    45.907] (II) Initializing extension BIG-REQUESTS
[    45.907] (II) Initializing extension SYNC
[    45.907] (II) Initializing extension XKEYBOARD
[    45.907] (II) Initializing extension XC-MISC
[    45.907] (II) Initializing extension SECURITY
[    45.907] (II) Initializing extension XFIXES
[    45.907] (II) Initializing extension RENDER
[    45.907] (II) Initializing extension RANDR
[    45.907] (II) Initializing extension COMPOSITE
[    45.907] (II) Initializing extension DAMAGE
[    45.907] (II) Initializing extension MIT-SCREEN-SAVER
[    45.908] (II) Initializing extension DOUBLE-BUFFER
[    45.908] (II) Initializing extension RECORD
[    45.908] (II) Initializing extension DPMS
[    45.908] (II) Initializing extension Present
[    45.908] (II) Initializing extension DRI3
[    45.908] (II) Initializing extension X-Resource
[    45.908] (II) Initializing extension XVideo
[    45.908] (II) Initializing extension XVideo-MotionCompensation
[    45.908] (II) Initializing extension XFree86-VidModeExtension
[    45.908] (II) Initializing extension XFree86-DGA
[    45.908] (II) Initializing extension XFree86-DRI
[    45.908] (II) Initializing extension DRI2
[    45.908] (II) Initializing extension GLX
[    45.908] (II) Initializing extension GLX
[    45.908] (II) Indirect GLX disabled.(II) Initializing extension NV-GLX
[    45.908] (II) Initializing extension NV-CONTROL
[    45.908] (II) Initializing extension XINERAMA
[    46.429] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[    46.429] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    46.429] (II) LoadModule: "libinput"
[    46.429] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[    46.482] (II) Module libinput: vendor="X.Org Foundation"
[    46.482] 	compiled for 1.20.3, module version = 0.28.2
[    46.482] 	Module class: X.Org XInput Driver
[    46.482] 	ABI class: X.Org XInput driver, version 24.1
[    46.482] (II) Using input driver 'libinput' for 'Power Button'
[    46.484] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 30 paused 0
[    46.484] (**) Power Button: always reports core events
[    46.484] (**) Option "Device" "/dev/input/event2"
[    46.484] (**) Option "_source" "server/udev"
[    46.531] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    46.531] (II) event2  - Power Button: device is a keyboard
[    46.531] (II) event2  - Power Button: device removed
[    46.531] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[    46.531] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    46.533] (II) event2  - Power Button: is tagged by udev as: Keyboard
[    46.533] (II) event2  - Power Button: device is a keyboard
[    46.534] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    46.534] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[    46.534] (II) Using input driver 'libinput' for 'Power Button'
[    46.536] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 33 paused 0
[    46.536] (**) Power Button: always reports core events
[    46.536] (**) Option "Device" "/dev/input/event1"
[    46.536] (**) Option "_source" "server/udev"
[    46.538] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    46.538] (II) event1  - Power Button: device is a keyboard
[    46.538] (II) event1  - Power Button: device removed
[    46.538] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[    46.538] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    46.540] (II) event1  - Power Button: is tagged by udev as: Keyboard
[    46.540] (II) event1  - Power Button: device is a keyboard
[    46.542] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[    46.542] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[    46.542] (II) Using input driver 'libinput' for 'Sleep Button'
[    46.544] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 34 paused 0
[    46.544] (**) Sleep Button: always reports core events
[    46.544] (**) Option "Device" "/dev/input/event0"
[    46.544] (**) Option "_source" "server/udev"
[    46.546] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    46.546] (II) event0  - Sleep Button: device is a keyboard
[    46.546] (II) event0  - Sleep Button: device removed
[    46.546] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[    46.546] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[    46.548] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[    46.548] (II) event0  - Sleep Button: device is a keyboard
[    46.550] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control (/dev/input/event4)
[    46.550] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    46.550] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[    46.616] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 35 paused 0
[    46.616] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[    46.616] (**) Option "Device" "/dev/input/event4"
[    46.616] (**) Option "_source" "server/udev"
[    46.619] (II) event4  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[    46.619] (II) event4  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[    46.620] (II) event4  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[    46.620] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: needs a virtual subdevice
[    46.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:045E:00E1.0001/input/input4/event4"
[    46.620] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: MOUSE, id 9)
[    46.620] (**) Option "AccelerationScheme" "none"
[    46.620] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) selected scheme none/0
[    46.620] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration factor: 2.000
[    46.620] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: (accel) acceleration threshold: 4
[    46.623] (II) event4  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is tagged by udev as: Keyboard
[    46.623] (II) event4  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device is a keyboard
[    46.625] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/event5)
[    46.625] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: Applying InputClass "libinput pointer catchall"
[    46.625] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse'
[    46.627] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 36 paused 0
[    46.627] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: always reports core events
[    46.627] (**) Option "Device" "/dev/input/event5"
[    46.627] (**) Option "_source" "server/udev"
[    46.630] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[    46.631] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[    46.631] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[    46.631] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:045E:00E1.0001/input/input5/event5"
[    46.631] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse" (type: MOUSE, id 10)
[    46.631] (**) Option "AccelerationScheme" "none"
[    46.631] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) selected scheme none/0
[    46.631] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration factor: 2.000
[    46.631] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: (accel) acceleration threshold: 4
[    46.634] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: is tagged by udev as: Mouse
[    46.634] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device is a pointer
[    46.636] (II) config/udev: Adding input device Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse (/dev/input/mouse0)
[    46.636] (II) No input driver specified, ignoring this device.
[    46.636] (II) This device may have been added with another device file.
[    46.637] (II) config/udev: Adding input device HDA VIA VT82xx Line Out Surround (/dev/input/event10)
[    46.637] (II) No input driver specified, ignoring this device.
[    46.637] (II) This device may have been added with another device file.
[    46.638] (II) config/udev: Adding input device HDA VIA VT82xx Line Out CLFE (/dev/input/event11)
[    46.638] (II) No input driver specified, ignoring this device.
[    46.638] (II) This device may have been added with another device file.
[    46.639] (II) config/udev: Adding input device HDA VIA VT82xx Mic (/dev/input/event7)
[    46.639] (II) No input driver specified, ignoring this device.
[    46.639] (II) This device may have been added with another device file.
[    46.640] (II) config/udev: Adding input device HDA VIA VT82xx Line (/dev/input/event8)
[    46.640] (II) No input driver specified, ignoring this device.
[    46.640] (II) This device may have been added with another device file.
[    46.640] (II) config/udev: Adding input device HDA VIA VT82xx Line Out Front (/dev/input/event9)
[    46.640] (II) No input driver specified, ignoring this device.
[    46.640] (II) This device may have been added with another device file.
[    46.642] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event3)
[    46.642] (**) AT Translated Set 2 keyboard: Applying InputClass "libinput keyboard catchall"
[    46.642] (II) Using input driver 'libinput' for 'AT Translated Set 2 keyboard'
[    46.644] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 37 paused 0
[    46.644] (**) AT Translated Set 2 keyboard: always reports core events
[    46.644] (**) Option "Device" "/dev/input/event3"
[    46.644] (**) Option "_source" "server/udev"
[    46.646] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    46.646] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    46.647] (II) event3  - AT Translated Set 2 keyboard: device removed
[    46.647] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input3/event3"
[    46.648] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 11)
[    46.650] (II) event3  - AT Translated Set 2 keyboard: is tagged by udev as: Keyboard
[    46.650] (II) event3  - AT Translated Set 2 keyboard: device is a keyboard
[    46.652] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[    46.652] (II) No input driver specified, ignoring this device.
[    46.652] (II) This device may have been added with another device file.
[    46.664] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: Applying InputClass "libinput keyboard catchall"
[    46.664] (II) Using input driver 'libinput' for 'Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control'
[    46.664] (II) systemd-logind: returning pre-existing fd for /dev/input/event4 13:68
[    46.664] (**) Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: always reports core events
[    46.664] (**) Option "Device" "/dev/input/event4"
[    46.664] (**) Option "_source" "_driver/libinput"
[    46.664] (II) libinput: Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: is a virtual subdevice
[    46.664] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:10.0/usb2/2-2/2-2:1.0/0003:045E:00E1.0001/input/input4/event4"
[    46.664] (II) XINPUT: Adding extended input device "Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control" (type: KEYBOARD, id 12)
[    46.931] (**) Option "fd" "30"
[    46.931] (II) event2  - Power Button: device removed
[    46.931] (**) Option "fd" "33"
[    46.931] (II) event1  - Power Button: device removed
[    46.931] (**) Option "fd" "34"
[    46.931] (II) event0  - Sleep Button: device removed
[    46.931] (**) Option "fd" "35"
[    46.932] (**) Option "fd" "36"
[    46.932] (II) event5  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Mouse: device removed
[    46.932] (**) Option "fd" "37"
[    46.932] (II) event3  - AT Translated Set 2 keyboard: device removed
[    46.932] (**) Option "fd" "35"
[    46.932] (II) event4  - Microsoft Microsoft Wireless Optical Mouse® 1.00 Consumer Control: device removed
[    46.967] (II) UnloadModule: "libinput"
[    46.967] (II) systemd-logind: not releasing fd for 13:68, still in use
[    46.967] (II) UnloadModule: "libinput"
[    46.967] (II) systemd-logind: releasing fd for 13:67
[    47.015] (II) UnloadModule: "libinput"
[    47.015] (II) systemd-logind: releasing fd for 13:69
[    47.017] (II) UnloadModule: "libinput"
[    47.017] (II) systemd-logind: releasing fd for 13:68
[    47.018] (II) UnloadModule: "libinput"
[    47.018] (II) systemd-logind: releasing fd for 13:64
[    47.019] (II) UnloadModule: "libinput"
[    47.019] (II) systemd-logind: releasing fd for 13:65
[    47.021] (II) UnloadModule: "libinput"
[    47.021] (II) systemd-logind: releasing fd for 13:66
[    48.338] (II) NVIDIA(GPU-0): Deleting GPU-0
[    48.709] (II) Server terminated successfully (0). Closing log file.

I will edit this post again if messing with xinit resolves the rest of the problem.

Last edited by warezIbanez (2019-02-10 10:06:19)

Offline

#5 2019-02-10 10:31:41

warezIbanez
Member
Registered: 2017-03-27
Posts: 14

Re: [Solved]Nvidia kernel module not receiving interrupts generated by GPU

Scratch editing the previous post. Startx is now functioning properly after installing xterm and removing xclock from my ~/.xinitrc .

So the problem was resolved through editing /etc/mkinitcpio.conf and at least adding nvidia to the MODULES line (though you may need to add nvidia_modeset, nvidia_uvm, and / or nvidia_drm as well) and running mkinitcpio -p linux (or what have you.) Next, (and what I think really made the difference for my system) was adding the following line to a file in the /etc/modprobe.d directory, I added it to nvdimm-security.conf since the file already existed:

options nvidia NVreg_EnableMSI=0

I also cleared out all kernel parameters that I may have added into the default grub configuration file, generated that again, and rebooted the system. From there, running startx worked, and after enabling the DM and rebooting the system once more, the greeter and subsequently desktop environment now display properly.

My thanks go to you two as well as the fourth post in this thread: https://bbs.archlinux.org/viewtopic.php?id=213080

Offline

Board footer

Powered by FluxBB