You are not logged in.

#1 2019-02-20 02:07:50

nzn
Member
Registered: 2019-02-20
Posts: 1

nvidia-settings not opening!

Hello all!

When I attempt to open the NVIDIA X Server Settings, I get the following error:

ERROR: Unable to load info from any available system

I have ran it using sudo and without, but it yields that same result

I'm using the nvidia-ltsdriver package from the AUR and have tried the nvidia and nvidia-beta  packages as well, with still the same result.

When I execute nvidia-smi, it shows me the following:

+-----------------------------------------------------------------------------+
| NVIDIA-SMI 415.27       Driver Version: 415.27       CUDA Version: 10.0     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 1050    Off  | 00000000:01:00.0 Off |                  N/A |
| N/A   47C    P0    N/A /  N/A |      0MiB /  4042MiB |      0%      Default |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|  No running processes found                                                 |
+-----------------------------------------------------------------------------+

This leads me to believe that my drivers are installed and working.

What should I be doing to get NVIDIA X Server Settings to actually open?

(I am using the XFCE4 DE/WM, if that helps.)

Thank you for your help!

Last edited by nzn (2019-02-20 02:09:44)

Offline

#2 2019-02-20 07:52:27

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 7,065

Re: nvidia-settings not opening!

Welcome to the boards nzn.

The nvidia-smi output tells you that the device is off, is this an Optimus laptop? Look at available configuration options in https://wiki.archlinux.org/index.php/NVIDIA_Optimus

FWIW if that is insufficient to get what you have to do post

lspci -k
pacman -Qs nvidia
pacman -Qs libgl

and a Xorg log

Last edited by V1del (2019-02-20 16:48:49)

Offline

#3 2019-02-24 22:55:09

Bluemango
Member
Registered: 2019-02-24
Posts: 5

Re: nvidia-settings not opening!

I have the same problem: ERROR: Unable to load info from any available system (when starting nvidia-settings).

Fully updated Arch Linux

$lspci -k | grep -A 2 -E "(VGA|3D)"
00:02.0 VGA compatible controller: Intel Corporation HD Graphics 530 (rev 06)
        DeviceName:  Onboard IGD
        Subsystem: ASUSTeK Computer Inc. HD Graphics 530
--
01:00.0 VGA compatible controller: NVIDIA Corporation GP107 [GeForce GTX 1050] (rev a1)
        Subsystem: eVga.com. Corp. GP107 [GeForce GTX 1050]
        Kernel driver in use: nvidia
$cat /proc/driver/nvidia/version
NVRM version: NVIDIA UNIX x86_64 Kernel Module  418.43  Tue Feb 19 01:12:11 CST 2019
GCC version:  gcc version 8.2.1 20181127 (GCC)

The Intel graphics is disabled in UEFI (Bios). But I have a feeling this can still be a possible reason to this and other problems that I am having with the nvidia driver.

$glxinfo | grep "OpenGL renderer"
OpenGL renderer string: Mesa DRI Intel(R) HD Graphics 530 (Skylake GT2)

Last edited by Bluemango (2019-02-24 23:37:03)

Offline

#4 2019-02-28 08:35:04

V1del
Forum Moderator
Registered: 2012-10-16
Posts: 7,065

Re: nvidia-settings not opening!

@Bluemango there's every evidence that intel is not disabled in your UEFI, double check that, and please open a separate thread should this not be sufficient, it is uncertain whether you actually have the same issue.

Offline

#5 2019-05-30 02:40:08

tobek
Member
Registered: 2018-05-29
Posts: 4

Re: nvidia-settings not opening!

A bit of a necrobump and a thorough read through the wiki will probably get you there, but a helpful pointer: if you're on Optimus (integrated intel GPU + discrete nvidia GPU) then depending on your setup, running nvidia-settings may not run it using nvidia GPU. In my case, using Bumblebee, you need to use optirun, and in the case of nvidia-settings need to tell it which X display to use, e.g.:

sudo optirun nvidia-settings -c :8

Offline

#6 2019-05-30 20:39:05

columbarius
Member
Registered: 2018-07-08
Posts: 7

Re: nvidia-settings not opening!

Hi,

I hope, this doesn't count as necrobumping, since i have probably the same issue as nzn and this thread isn't closed, or should i have just created a new thread?

I'm getting the same error, while trying to start nvidia-settings:

$ nvidia-settings -V
WARNING: NV-CONTROL extension not found on this Display.
ERROR: Unable to load info from any available system

While the monitor and all the desktop experience is just working right and also cuda-programs are working, it's probably because the NV-CONTROLL extension fails to load into the Xorg server (libxnvctrl).
This is also seen in the Xorg log, that the nvidia xorg extension NV-CONTROL is not launching because of errors.

[   205.844] (II) Initializing extension NV-CONTROL
[   205.844] (EE) Not enabling extension NV-CONTROL: maximum number of events or errors exceeded.

Output of nvidia-smi:

$ nvidia-smi
Thu May 30 22:22:16 2019       
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 430.14       Driver Version: 430.14       CUDA Version: 10.2     |
|-------------------------------+----------------------+----------------------+
| GPU  Name        Persistence-M| Bus-Id        Disp.A | Volatile Uncorr. ECC |
| Fan  Temp  Perf  Pwr:Usage/Cap|         Memory-Usage | GPU-Util  Compute M. |
|===============================+======================+======================|
|   0  GeForce GTX 970     Off  | 00000000:09:00.0  On |                  N/A |
| 32%   46C    P8    16W / 151W |    148MiB /  4039MiB |      1%      Default |
+-------------------------------+----------------------+----------------------+
                                                                               
+-----------------------------------------------------------------------------+
| Processes:                                                       GPU Memory |
|  GPU       PID   Type   Process name                             Usage      |
|=============================================================================|
|    0       896      G   /usr/lib/Xorg                                114MiB |
|    0     14240      G   openscad                                      17MiB |
|    0     15093      G   /usr/lib/Xorg                                 12MiB |
+-----------------------------------------------------------------------------+

My motherboard has a dedicated graphicschip, which is deactivated and isn't recognized by the os:

$ lspci -k
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers (rev 07)
	Subsystem: Gigabyte Technology Co., Ltd Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
	Kernel driver in use: skl_uncore
00:14.0 USB controller: Intel Corporation 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller (rev 31)
	Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset Family USB 3.0 xHCI Controller
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
00:14.2 Signal processing controller: Intel Corporation 100 Series/C230 Series Chipset Family Thermal Subsystem (rev 31)
	Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset Family Thermal Subsystem
	Kernel driver in use: intel_pch_thermal
	Kernel modules: intel_pch_thermal
00:16.0 Communication controller: Intel Corporation 100 Series/C230 Series Chipset Family MEI Controller #1 (rev 31)
	Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset Family MEI Controller
	Kernel driver in use: mei_me
	Kernel modules: mei_me
00:17.0 SATA controller: Intel Corporation Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode] (rev 31)
	Subsystem: Gigabyte Technology Co., Ltd Q170/Q150/B150/H170/H110/Z170/CM236 Chipset SATA Controller [AHCI Mode]
	Kernel driver in use: ahci
	Kernel modules: ahci
00:1b.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #19 (rev f1)
	Kernel driver in use: pcieport
00:1c.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #3 (rev f1)
	Kernel driver in use: pcieport
00:1c.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #5 (rev f1)
	Kernel driver in use: pcieport
00:1d.0 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #9 (rev f1)
	Kernel driver in use: pcieport
00:1d.4 PCI bridge: Intel Corporation 100 Series/C230 Series Chipset Family PCI Express Root Port #13 (rev f1)
	Kernel driver in use: pcieport
00:1f.0 ISA bridge: Intel Corporation H170 Chipset LPC/eSPI Controller (rev 31)
	Subsystem: Gigabyte Technology Co., Ltd H170 Chipset LPC/eSPI Controller
00:1f.2 Memory controller: Intel Corporation 100 Series/C230 Series Chipset Family Power Management Controller (rev 31)
	Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset Family Power Management Controller
00:1f.3 Audio device: Intel Corporation 100 Series/C230 Series Chipset Family HD Audio Controller (rev 31)
	Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset Family HD Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel
00:1f.4 SMBus: Intel Corporation 100 Series/C230 Series Chipset Family SMBus (rev 31)
	Subsystem: Gigabyte Technology Co., Ltd 100 Series/C230 Series Chipset Family SMBus
	Kernel driver in use: i801_smbus
	Kernel modules: i2c_i801
00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (2) I219-V (rev 31)
	Subsystem: Gigabyte Technology Co., Ltd Ethernet Connection (2) I219-V
	Kernel driver in use: e1000e
	Kernel modules: e1000e
01:00.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015]
	Kernel driver in use: pcieport
02:00.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015]
	Kernel driver in use: pcieport
02:01.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015]
	Kernel driver in use: pcieport
02:02.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015]
	Kernel driver in use: pcieport
02:04.0 PCI bridge: Intel Corporation DSL6540 Thunderbolt 3 Bridge [Alpine Ridge 4C 2015]
	Kernel driver in use: pcieport
05:00.0 USB controller: Intel Corporation DSL6540 USB 3.1 Controller [Alpine Ridge]
	Subsystem: Device 2222:1111
	Kernel driver in use: xhci_hcd
	Kernel modules: xhci_pci
07:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 04)
09:00.0 VGA compatible controller: NVIDIA Corporation GM204 [GeForce GTX 970] (rev a1)
	Subsystem: ZOTAC International (MCO) Ltd. GM204 [GeForce GTX 970]
	Kernel driver in use: nvidia
	Kernel modules: nouveau, nvidia_drm, nvidia
09:00.1 Audio device: NVIDIA Corporation GM204 High Definition Audio Controller (rev a1)
	Subsystem: ZOTAC International (MCO) Ltd. GM204 High Definition Audio Controller
	Kernel driver in use: snd_hda_intel
	Kernel modules: snd_hda_intel

The recent nvidia drivers are installed:

$ pacman -Qs nvidia
local/cuda 10.1.168-1
    NVIDIA's GPU programming toolkit
local/lib32-libvdpau 1.2-1
    Nvidia VDPAU library
local/lib32-nvidia-utils 430.14-1
    NVIDIA drivers utilities (32-bit)
local/lib32-opencl-nvidia 430.14-1
    OpenCL implemention for NVIDIA (32-bit)
local/libvdpau 1.2-1
    Nvidia VDPAU library
local/libxnvctrl 430.14-1
    NVIDIA NV-CONTROL X extension
local/nvidia 430.14-6
    NVIDIA drivers for linux
local/nvidia-settings 430.14-1
    Tool for configuring the NVIDIA graphics driver
local/nvidia-utils 430.14-1
    NVIDIA drivers utilities
local/opencl-nvidia 430.14-1
    OpenCL implemention for NVIDIA
$ pacman -Qs libxnvctrl
local/libxnvctrl 430.14-1
    NVIDIA NV-CONTROL X extension

Here's the full Xorg log for completeness:

$ cat /var/log/Xorg.0.log
[   203.799] (WW) Failed to open protocol names file lib/xorg/protocol.txt
[   203.799] 
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[   203.799] Build Operating System: Linux Arch Linux
[   203.800] Current Operating System: Linux elrond.ardholen.ddns.net 5.1.5-arch1-2-ARCH #1 SMP PREEMPT Mon May 27 03:37:39 UTC 2019 x86_64
[   203.800] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/mapper/base--elrond-root rw quiet
[   203.800] Build Date: 27 February 2019  04:04:00PM
[   203.800]  
[   203.800] Current version of pixman: 0.38.4
[   203.800] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[   203.800] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   203.800] (==) Log file: "/var/log/Xorg.0.log", Time: Thu May 30 13:12:51 2019
[   203.838] (==) Using config directory: "/etc/X11/xorg.conf.d"
[   203.838] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[   203.894] (==) No Layout section.  Using the first Screen section.
[   203.894] (**) |-->Screen "Default Screen" (0)
[   203.894] (**) |   |-->Monitor "<default monitor>"
[   203.895] (==) No monitor specified for screen "Default Screen".
	Using a default monitor configuration.
[   203.895] (==) Automatically adding devices
[   203.895] (==) Automatically enabling devices
[   203.895] (==) Automatically adding GPU devices
[   203.895] (==) Automatically binding GPU devices
[   203.895] (==) Max clients allowed: 256, resource mask: 0x1fffff
[   203.971] (WW) The directory "/usr/share/fonts/Type1" does not exist.
[   203.971] 	Entry deleted from font path.
[   203.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi".
[   203.984] 	Entry deleted from font path.
[   203.984] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi").
[   203.984] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi".
[   203.984] 	Entry deleted from font path.
[   203.984] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi").
[   203.984] (==) FontPath set to:
	/usr/share/fonts/misc,
	/usr/share/fonts/TTF,
	/usr/share/fonts/OTF
[   203.984] (==) ModulePath set to "/usr/lib/xorg/modules"
[   203.984] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[   203.984] (II) Module ABI versions:
[   203.984] 	X.Org ANSI C Emulation: 0.4
[   203.984] 	X.Org Video Driver: 24.0
[   203.984] 	X.Org XInput driver : 24.1
[   203.984] 	X.Org Server Extension : 10.0
[   203.985] (++) using VT number 1

[   203.987] (II) systemd-logind: took control of session /org/freedesktop/login1/session/_31
[   203.987] (II) xfree86: Adding drm device (/dev/dri/card0)
[   203.987] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 10 paused 0
[   204.012] (**) OutputClass "nvidia" ModulePath extended to "/usr/lib/nvidia/xorg,/usr/lib/xorg/modules,/usr/lib/xorg/modules"
[   204.012] (**) OutputClass "nvidia" setting /dev/dri/card0 as PrimaryGPU
[   204.015] (--) PCI:*(9@0:0:0) 10de:13c2:19da:1366 rev 161, Mem @ 0xde000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/131072
[   204.015] (II) Open ACPI successful (/var/run/acpid.socket)
[   204.015] (II) "glx" will be loaded by default.
[   204.015] (II) LoadModule: "vnc"
[   204.052] (II) Loading /usr/lib/xorg/modules/extensions/libvnc.so
[   204.193] (II) Module vnc: vendor="TigerVNC Project"
[   204.193] 	compiled for 1.20.0, module version = 1.0.0
[   204.193] 	Module class: X.Org Server Extension
[   204.193] 	ABI class: X.Org Server Extension, version 10.0
[   204.193] (II) LoadModule: "glx"
[   204.194] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[   204.268] (II) Module glx: vendor="X.Org Foundation"
[   204.268] 	compiled for 1.20.4, module version = 1.0.0
[   204.268] 	ABI class: X.Org Server Extension, version 10.0
[   204.268] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[   204.268] 	loading driver: nvidia
[   204.268] (==) Matched nvidia as autoconfigured driver 0
[   204.268] (==) Matched nouveau as autoconfigured driver 1
[   204.268] (==) Matched nv as autoconfigured driver 2
[   204.268] (==) Matched modesetting as autoconfigured driver 3
[   204.268] (==) Matched fbdev as autoconfigured driver 4
[   204.268] (==) Matched vesa as autoconfigured driver 5
[   204.268] (==) Assigned the driver to the xf86ConfigLayout
[   204.268] (II) LoadModule: "nvidia"
[   204.269] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[   204.333] (II) Module nvidia: vendor="NVIDIA Corporation"
[   204.333] 	compiled for 1.6.99.901, module version = 1.0.0
[   204.333] 	Module class: X.Org Video Driver
[   204.345] (II) LoadModule: "nouveau"
[   204.346] (WW) Warning, couldn't open module nouveau
[   204.346] (EE) Failed to load module "nouveau" (module does not exist, 0)
[   204.346] (II) LoadModule: "nv"
[   204.347] (WW) Warning, couldn't open module nv
[   204.347] (EE) Failed to load module "nv" (module does not exist, 0)
[   204.347] (II) LoadModule: "modesetting"
[   204.347] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[   204.386] (II) Module modesetting: vendor="X.Org Foundation"
[   204.386] 	compiled for 1.20.4, module version = 1.20.4
[   204.386] 	Module class: X.Org Video Driver
[   204.386] 	ABI class: X.Org Video Driver, version 24.0
[   204.386] (II) LoadModule: "fbdev"
[   204.387] (WW) Warning, couldn't open module fbdev
[   204.387] (EE) Failed to load module "fbdev" (module does not exist, 0)
[   204.387] (II) LoadModule: "vesa"
[   204.387] (WW) Warning, couldn't open module vesa
[   204.387] (EE) Failed to load module "vesa" (module does not exist, 0)
[   204.388] (II) NVIDIA dlloader X Driver  430.14  Tue May  7 20:03:40 CDT 2019
[   204.388] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[   204.389] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[   204.389] (II) systemd-logind: releasing fd for 226:0
[   204.400] (II) Loading sub module "fb"
[   204.400] (II) LoadModule: "fb"
[   204.400] (II) Loading /usr/lib/xorg/modules/libfb.so
[   204.409] (II) Module fb: vendor="X.Org Foundation"
[   204.409] 	compiled for 1.20.4, module version = 1.0.0
[   204.409] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   204.410] (II) Loading sub module "wfb"
[   204.410] (II) LoadModule: "wfb"
[   204.410] (II) Loading /usr/lib/xorg/modules/libwfb.so
[   204.416] (II) Module wfb: vendor="X.Org Foundation"
[   204.416] 	compiled for 1.20.4, module version = 1.0.0
[   204.416] 	ABI class: X.Org ANSI C Emulation, version 0.4
[   204.416] (II) Loading sub module "ramdac"
[   204.416] (II) LoadModule: "ramdac"
[   204.417] (II) Module "ramdac" already built-in
[   204.419] (WW) Falling back to old probe method for modesetting
[   204.420] (II) NVIDIA(0): Creating default Display subsection in Screen section
	"Default Screen" for depth/fbbpp 24/32
[   204.420] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[   204.420] (==) NVIDIA(0): RGB weight 888
[   204.420] (==) NVIDIA(0): Default visual is TrueColor
[   204.420] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[   204.420] (II) Applying OutputClass "nvidia" options to /dev/dri/card0
[   204.420] (**) NVIDIA(0): Option "AllowEmptyInitialConfiguration"
[   204.421] (**) NVIDIA(0): Enabling 2D acceleration
[   204.421] (II) Loading sub module "glxserver_nvidia"
[   204.421] (II) LoadModule: "glxserver_nvidia"
[   204.421] (II) Loading /usr/lib/nvidia/xorg/libglxserver_nvidia.so
[   204.856] (II) Module glxserver_nvidia: vendor="NVIDIA Corporation"
[   204.856] 	compiled for 1.6.99.901, module version = 1.0.0
[   204.856] 	Module class: X.Org Server Extension
[   204.864] (II) NVIDIA GLX Module  430.14  Tue May  7 20:02:40 CDT 2019
[   205.650] (--) NVIDIA(0): Valid display device(s) on GPU-0 at PCI:9:0:0
[   205.650] (--) NVIDIA(0):     CRT-0
[   205.650] (--) NVIDIA(0):     DFP-0 (boot)
[   205.650] (--) NVIDIA(0):     DFP-1
[   205.650] (--) NVIDIA(0):     DFP-2
[   205.650] (--) NVIDIA(0):     DFP-3
[   205.650] (--) NVIDIA(0):     DFP-4
[   205.651] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 970 (GM204-A) at PCI:9:0:0 (GPU-0)
[   205.651] (--) NVIDIA(0): Memory: 4194304 kBytes
[   205.651] (--) NVIDIA(0): VideoBIOS: 84.04.36.00.6e
[   205.651] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[   205.667] (--) NVIDIA(GPU-0): CRT-0: disconnected
[   205.667] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[   205.667] (--) NVIDIA(GPU-0): 
[   205.699] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[   205.699] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[   205.699] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[   205.699] (--) NVIDIA(GPU-0): 
[   205.699] (--) NVIDIA(GPU-0): DFP-1: disconnected
[   205.699] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[   205.699] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[   205.699] (--) NVIDIA(GPU-0): 
[   205.699] (--) NVIDIA(GPU-0): DFP-2: disconnected
[   205.699] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[   205.699] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[   205.699] (--) NVIDIA(GPU-0): 
[   205.699] (--) NVIDIA(GPU-0): DFP-3: disconnected
[   205.699] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[   205.699] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[   205.699] (--) NVIDIA(GPU-0): 
[   205.699] (--) NVIDIA(GPU-0): DFP-4: disconnected
[   205.699] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[   205.699] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[   205.699] (--) NVIDIA(GPU-0): 
[   205.701] (==) NVIDIA(0): 
[   205.701] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[   205.701] (==) NVIDIA(0):     will be used as the requested mode.
[   205.701] (==) NVIDIA(0): 
[   205.701] (II) NVIDIA(0): Validated MetaModes:
[   205.701] (II) NVIDIA(0):     "DFP-0:nvidia-auto-select"
[   205.701] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
[   205.704] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
[   205.704] (--) NVIDIA(0):     option
[   205.704] (II) UnloadModule: "modesetting"
[   205.704] (II) Unloading modesetting
[   205.704] (II) NVIDIA: Using 6144.00 MB of virtual memory for indirect memory
[   205.704] (II) NVIDIA:     access.
[   205.737] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[   205.809] (==) NVIDIA(0): Disabling shared memory pixmaps
[   205.809] (==) NVIDIA(0): Backing store enabled
[   205.809] (==) NVIDIA(0): Silken mouse disabled
[   205.809] (==) NVIDIA(0): DPMS enabled
[   205.822] (WW) NVIDIA(0): Option "PrimaryGPU" is not used
[   205.822] (WW) NVIDIA(0): Option "PasswordFile" is not used
[   205.822] (II) Loading sub module "dri2"
[   205.822] (II) LoadModule: "dri2"
[   205.822] (II) Module "dri2" already built-in
[   205.822] (II) NVIDIA(0): [DRI2] Setup complete
[   205.822] (II) NVIDIA(0): [DRI2]   VDPAU driver: nvidia
[   205.833] (II) Initializing extension Generic Event Extension
[   205.833] (II) Initializing extension SHAPE
[   205.833] (II) Initializing extension MIT-SHM
[   205.833] (II) Initializing extension XInputExtension
[   205.833] (II) Initializing extension XTEST
[   205.833] (II) Initializing extension BIG-REQUESTS
[   205.833] (II) Initializing extension SYNC
[   205.833] (II) Initializing extension XKEYBOARD
[   205.833] (II) Initializing extension XC-MISC
[   205.833] (II) Initializing extension SECURITY
[   205.833] (II) Initializing extension XFIXES
[   205.833] (II) Initializing extension RENDER
[   205.833] (II) Initializing extension RANDR
[   205.833] (II) Initializing extension COMPOSITE
[   205.833] (II) Initializing extension DAMAGE
[   205.833] (II) Initializing extension MIT-SCREEN-SAVER
[   205.833] (II) Initializing extension DOUBLE-BUFFER
[   205.833] (II) Initializing extension RECORD
[   205.833] (II) Initializing extension DPMS
[   205.833] (II) Initializing extension Present
[   205.833] (II) Initializing extension DRI3
[   205.833] (II) Initializing extension X-Resource
[   205.833] (II) Initializing extension XVideo
[   205.833] (II) Initializing extension XVideo-MotionCompensation
[   205.833] (II) Initializing extension GLX
[   205.833] (II) Initializing extension GLX
[   205.833] (II) Indirect GLX disabled.
[   205.833] (II) GLX: Another vendor is already registered for screen 0
[   205.833] (II) Initializing extension XFree86-VidModeExtension
[   205.833] (II) Initializing extension XFree86-DGA
[   205.833] (II) Initializing extension XFree86-DRI
[   205.833] (II) Initializing extension DRI2
[   205.833] (II) Initializing extension VNC
[   205.844] (II) Initializing extension NV-GLX
[   205.844] (II) Initializing extension NV-CONTROL
[   205.844] (EE) Not enabling extension NV-CONTROL: maximum number of events or errors exceeded.
[   205.844] (II) Initializing extension XINERAMA
[   206.284] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[   206.284] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   206.284] (**) Power Button: Applying InputClass "keyboard"
[   206.284] (II) LoadModule: "libinput"
[   206.284] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[   206.314] (II) Module libinput: vendor="X.Org Foundation"
[   206.314] 	compiled for 1.20.3, module version = 0.28.2
[   206.314] 	Module class: X.Org XInput Driver
[   206.314] 	ABI class: X.Org XInput driver, version 24.1
[   206.314] (II) Using input driver 'libinput' for 'Power Button'
[   206.315] (II) systemd-logind: got fd for /dev/input/event2 13:66 fd 35 paused 0
[   206.315] (**) Power Button: always reports core events
[   206.315] (**) Option "Device" "/dev/input/event2"
[   206.315] (**) Option "_source" "server/udev"
[   206.406] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   206.406] (II) event2  - Power Button: device is a keyboard
[   206.407] (II) event2  - Power Button: device removed
[   206.407] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[   206.407] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[   206.407] (**) Option "xkb_model" "pc105"
[   206.407] (**) Option "xkb_layout" "de"
[   206.407] (**) Option "xkb_variant" "nodeadkeys"
[   206.437] (II) event2  - Power Button: is tagged by udev as: Keyboard
[   206.437] (II) event2  - Power Button: device is a keyboard
[   206.437] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[   206.437] (**) Power Button: Applying InputClass "libinput keyboard catchall"
[   206.437] (**) Power Button: Applying InputClass "keyboard"
[   206.437] (II) Using input driver 'libinput' for 'Power Button'
[   206.438] (II) systemd-logind: got fd for /dev/input/event1 13:65 fd 38 paused 0
[   206.438] (**) Power Button: always reports core events
[   206.438] (**) Option "Device" "/dev/input/event1"
[   206.438] (**) Option "_source" "server/udev"
[   206.438] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   206.438] (II) event1  - Power Button: device is a keyboard
[   206.439] (II) event1  - Power Button: device removed
[   206.439] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1/event1"
[   206.439] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[   206.439] (**) Option "xkb_model" "pc105"
[   206.439] (**) Option "xkb_layout" "de"
[   206.439] (**) Option "xkb_variant" "nodeadkeys"
[   206.439] (II) event1  - Power Button: is tagged by udev as: Keyboard
[   206.439] (II) event1  - Power Button: device is a keyboard
[   206.440] (II) config/udev: Adding input device Sleep Button (/dev/input/event0)
[   206.440] (**) Sleep Button: Applying InputClass "libinput keyboard catchall"
[   206.440] (**) Sleep Button: Applying InputClass "keyboard"
[   206.440] (II) Using input driver 'libinput' for 'Sleep Button'
[   206.441] (II) systemd-logind: got fd for /dev/input/event0 13:64 fd 39 paused 0
[   206.441] (**) Sleep Button: always reports core events
[   206.441] (**) Option "Device" "/dev/input/event0"
[   206.441] (**) Option "_source" "server/udev"
[   206.441] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   206.441] (II) event0  - Sleep Button: device is a keyboard
[   206.441] (II) event0  - Sleep Button: device removed
[   206.441] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0/event0"
[   206.441] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
[   206.441] (**) Option "xkb_model" "pc105"
[   206.442] (**) Option "xkb_layout" "de"
[   206.442] (**) Option "xkb_variant" "nodeadkeys"
[   206.442] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[   206.442] (II) event0  - Sleep Button: device is a keyboard
[   206.443] (II) config/udev: Adding input device Logitech USB Keyboard (/dev/input/event3)
[   206.443] (**) Logitech USB Keyboard: Applying InputClass "libinput keyboard catchall"
[   206.443] (**) Logitech USB Keyboard: Applying InputClass "keyboard"
[   206.443] (II) Using input driver 'libinput' for 'Logitech USB Keyboard'
[   206.444] (II) systemd-logind: got fd for /dev/input/event3 13:67 fd 40 paused 0
[   206.444] (**) Logitech USB Keyboard: always reports core events
[   206.444] (**) Option "Device" "/dev/input/event3"
[   206.444] (**) Option "_source" "server/udev"
[   206.445] (II) event3  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[   206.445] (II) event3  - Logitech USB Keyboard: device is a keyboard
[   206.445] (II) event3  - Logitech USB Keyboard: device removed
[   206.445] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.0/0003:046D:C31C.0001/input/input5/event3"
[   206.445] (II) XINPUT: Adding extended input device "Logitech USB Keyboard" (type: KEYBOARD, id 9)
[   206.445] (**) Option "xkb_model" "pc105"
[   206.445] (**) Option "xkb_layout" "de"
[   206.445] (**) Option "xkb_variant" "nodeadkeys"
[   206.447] (II) event3  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[   206.447] (II) event3  - Logitech USB Keyboard: device is a keyboard
[   206.448] (II) config/udev: Adding input device Logitech USB Keyboard Consumer Control (/dev/input/event4)
[   206.448] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "libinput keyboard catchall"
[   206.448] (**) Logitech USB Keyboard Consumer Control: Applying InputClass "keyboard"
[   206.448] (II) Using input driver 'libinput' for 'Logitech USB Keyboard Consumer Control'
[   206.449] (II) systemd-logind: got fd for /dev/input/event4 13:68 fd 41 paused 0
[   206.449] (**) Logitech USB Keyboard Consumer Control: always reports core events
[   206.449] (**) Option "Device" "/dev/input/event4"
[   206.449] (**) Option "_source" "server/udev"
[   206.450] (II) event4  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[   206.450] (II) event4  - Logitech USB Keyboard Consumer Control: device is a keyboard
[   206.450] (II) event4  - Logitech USB Keyboard Consumer Control: device removed
[   206.450] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:046D:C31C.0002/input/input6/event4"
[   206.450] (II) XINPUT: Adding extended input device "Logitech USB Keyboard Consumer Control" (type: KEYBOARD, id 10)
[   206.450] (**) Option "xkb_model" "pc105"
[   206.450] (**) Option "xkb_layout" "de"
[   206.450] (**) Option "xkb_variant" "nodeadkeys"
[   206.452] (II) event4  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[   206.452] (II) event4  - Logitech USB Keyboard Consumer Control: device is a keyboard
[   206.453] (II) config/udev: Adding input device Logitech USB Keyboard System Control (/dev/input/event5)
[   206.453] (**) Logitech USB Keyboard System Control: Applying InputClass "libinput keyboard catchall"
[   206.453] (**) Logitech USB Keyboard System Control: Applying InputClass "keyboard"
[   206.453] (II) Using input driver 'libinput' for 'Logitech USB Keyboard System Control'
[   206.454] (II) systemd-logind: got fd for /dev/input/event5 13:69 fd 42 paused 0
[   206.454] (**) Logitech USB Keyboard System Control: always reports core events
[   206.454] (**) Option "Device" "/dev/input/event5"
[   206.454] (**) Option "_source" "server/udev"
[   206.456] (II) event5  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[   206.456] (II) event5  - Logitech USB Keyboard System Control: device is a keyboard
[   206.456] (II) event5  - Logitech USB Keyboard System Control: device removed
[   206.456] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-13/1-13:1.1/0003:046D:C31C.0002/input/input7/event5"
[   206.456] (II) XINPUT: Adding extended input device "Logitech USB Keyboard System Control" (type: KEYBOARD, id 11)
[   206.456] (**) Option "xkb_model" "pc105"
[   206.456] (**) Option "xkb_layout" "de"
[   206.456] (**) Option "xkb_variant" "nodeadkeys"
[   206.457] (II) event5  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[   206.457] (II) event5  - Logitech USB Keyboard System Control: device is a keyboard
[   206.458] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event6)
[   206.458] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "libinput pointer catchall"
[   206.458] (II) Using input driver 'libinput' for 'Logitech USB-PS/2 Optical Mouse'
[   206.514] (II) systemd-logind: got fd for /dev/input/event6 13:70 fd 43 paused 0
[   206.514] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
[   206.514] (**) Option "Device" "/dev/input/event6"
[   206.514] (**) Option "_source" "server/udev"
[   206.518] (II) event6  - Logitech USB-PS/2 Optical Mouse: is tagged by udev as: Mouse
[   206.518] (II) event6  - Logitech USB-PS/2 Optical Mouse: device is a pointer
[   206.518] (II) event6  - Logitech USB-PS/2 Optical Mouse: device removed
[   206.518] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb1/1-14/1-14:1.0/0003:046D:C051.0003/input/input8/event6"
[   206.518] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 12)
[   206.518] (**) Option "AccelerationScheme" "none"
[   206.519] (**) Logitech USB-PS/2 Optical Mouse: (accel) selected scheme none/0
[   206.519] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
[   206.519] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
[   206.522] (II) event6  - Logitech USB-PS/2 Optical Mouse: is tagged by udev as: Mouse
[   206.522] (II) event6  - Logitech USB-PS/2 Optical Mouse: device is a pointer
[   206.524] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
[   206.524] (II) No input driver specified, ignoring this device.
[   206.524] (II) This device may have been added with another device file.
[   206.526] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/event8)
[   206.526] (II) No input driver specified, ignoring this device.
[   206.526] (II) This device may have been added with another device file.
[   206.528] (II) config/udev: Adding input device Microsoft X-Box 360 pad (/dev/input/js0)
[   206.528] (II) No input driver specified, ignoring this device.
[   206.528] (II) This device may have been added with another device file.
[   206.531] (II) config/udev: Adding input device UVC Camera (046d:0807) (/dev/input/event18)
[   206.531] (**) UVC Camera (046d:0807): Applying InputClass "libinput keyboard catchall"
[   206.531] (**) UVC Camera (046d:0807): Applying InputClass "keyboard"
[   206.531] (II) Using input driver 'libinput' for 'UVC Camera (046d:0807)'
[   206.533] (II) systemd-logind: got fd for /dev/input/event18 13:82 fd 44 paused 0
[   206.533] (**) UVC Camera (046d:0807): always reports core events
[   206.533] (**) Option "Device" "/dev/input/event18"
[   206.533] (**) Option "_source" "server/udev"
[   206.538] (II) event18 - UVC Camera (046d:0807): is tagged by udev as: Keyboard
[   206.538] (II) event18 - UVC Camera (046d:0807): device is a keyboard
[   206.538] (II) event18 - UVC Camera (046d:0807): device removed
[   206.538] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1b.0/0000:01:00.0/0000:02:02.0/0000:05:00.0/usb3/3-2/3-2.4/3-2.4:1.0/input/input21/event18"
[   206.538] (II) XINPUT: Adding extended input device "UVC Camera (046d:0807)" (type: KEYBOARD, id 13)
[   206.538] (**) Option "xkb_model" "pc105"
[   206.538] (**) Option "xkb_layout" "de"
[   206.538] (**) Option "xkb_variant" "nodeadkeys"
[   206.543] (II) event18 - UVC Camera (046d:0807): is tagged by udev as: Keyboard
[   206.543] (II) event18 - UVC Camera (046d:0807): device is a keyboard
[   206.544] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event19)
[   206.544] (II) No input driver specified, ignoring this device.
[   206.544] (II) This device may have been added with another device file.
[   206.545] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event20)
[   206.545] (II) No input driver specified, ignoring this device.
[   206.545] (II) This device may have been added with another device file.
[   206.546] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event21)
[   206.546] (II) No input driver specified, ignoring this device.
[   206.546] (II) This device may have been added with another device file.
[   206.547] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event22)
[   206.547] (II) No input driver specified, ignoring this device.
[   206.547] (II) This device may have been added with another device file.
[   206.548] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event9)
[   206.548] (II) No input driver specified, ignoring this device.
[   206.548] (II) This device may have been added with another device file.
[   206.549] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event10)
[   206.549] (II) No input driver specified, ignoring this device.
[   206.549] (II) This device may have been added with another device file.
[   206.550] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event11)
[   206.550] (II) No input driver specified, ignoring this device.
[   206.550] (II) This device may have been added with another device file.
[   206.550] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event12)
[   206.550] (II) No input driver specified, ignoring this device.
[   206.550] (II) This device may have been added with another device file.
[   206.551] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event13)
[   206.551] (II) No input driver specified, ignoring this device.
[   206.551] (II) This device may have been added with another device file.
[   206.552] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event14)
[   206.552] (II) No input driver specified, ignoring this device.
[   206.552] (II) This device may have been added with another device file.
[   206.552] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event15)
[   206.552] (II) No input driver specified, ignoring this device.
[   206.552] (II) This device may have been added with another device file.
[   206.553] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event16)
[   206.553] (II) No input driver specified, ignoring this device.
[   206.553] (II) This device may have been added with another device file.
[   206.553] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event17)
[   206.553] (II) No input driver specified, ignoring this device.
[   206.553] (II) This device may have been added with another device file.
[   206.554] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[   206.554] (II) No input driver specified, ignoring this device.
[   206.554] (II) This device may have been added with another device file.
[ 30277.588] (**) Option "fd" "35"
[ 30277.588] (II) event2  - Power Button: device removed
[ 30277.589] (**) Option "fd" "38"
[ 30277.589] (II) event1  - Power Button: device removed
[ 30277.589] (**) Option "fd" "39"
[ 30277.589] (II) event0  - Sleep Button: device removed
[ 30277.590] (**) Option "fd" "40"
[ 30277.590] (II) event3  - Logitech USB Keyboard: device removed
[ 30277.590] (**) Option "fd" "41"
[ 30277.590] (II) event4  - Logitech USB Keyboard Consumer Control: device removed
[ 30277.590] (**) Option "fd" "42"
[ 30277.590] (II) event5  - Logitech USB Keyboard System Control: device removed
[ 30277.591] (**) Option "fd" "43"
[ 30277.591] (II) event6  - Logitech USB-PS/2 Optical Mouse: device removed
[ 30277.591] (**) Option "fd" "44"
[ 30277.591] (II) event18 - UVC Camera (046d:0807): device removed
[ 30277.753] (II) systemd-logind: got pause for 13:67
[ 30277.753] (II) systemd-logind: got pause for 13:82
[ 30277.753] (II) systemd-logind: got pause for 13:68
[ 30277.753] (II) systemd-logind: got pause for 13:69
[ 30277.755] (II) systemd-logind: got pause for 13:64
[ 30277.755] (II) systemd-logind: got pause for 13:65
[ 30277.755] (II) systemd-logind: got pause for 13:70
[ 30277.755] (II) systemd-logind: got pause for 13:66
[ 30510.394] (II) systemd-logind: got resume for 13:67
[ 30510.394] (II) Open ACPI successful (/var/run/acpid.socket)
[ 30510.412] (--) NVIDIA(GPU-0): CRT-0: disconnected
[ 30510.412] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 30510.412] (--) NVIDIA(GPU-0): 
[ 30510.446] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): connected
[ 30510.446] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): Internal TMDS
[ 30510.446] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[ 30510.446] (--) NVIDIA(GPU-0): 
[ 30510.446] (--) NVIDIA(GPU-0): DFP-1: disconnected
[ 30510.446] (--) NVIDIA(GPU-0): DFP-1: Internal TMDS
[ 30510.446] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 30510.446] (--) NVIDIA(GPU-0): 
[ 30510.446] (--) NVIDIA(GPU-0): DFP-2: disconnected
[ 30510.446] (--) NVIDIA(GPU-0): DFP-2: Internal DisplayPort
[ 30510.446] (--) NVIDIA(GPU-0): DFP-2: 960.0 MHz maximum pixel clock
[ 30510.446] (--) NVIDIA(GPU-0): 
[ 30510.446] (--) NVIDIA(GPU-0): DFP-3: disconnected
[ 30510.446] (--) NVIDIA(GPU-0): DFP-3: Internal TMDS
[ 30510.446] (--) NVIDIA(GPU-0): DFP-3: 165.0 MHz maximum pixel clock
[ 30510.446] (--) NVIDIA(GPU-0): 
[ 30510.446] (--) NVIDIA(GPU-0): DFP-4: disconnected
[ 30510.446] (--) NVIDIA(GPU-0): DFP-4: Internal TMDS
[ 30510.447] (--) NVIDIA(GPU-0): DFP-4: 330.0 MHz maximum pixel clock
[ 30510.447] (--) NVIDIA(GPU-0): 
[ 30510.462] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select"
[ 30510.527] (II) event3  - Logitech USB Keyboard: is tagged by udev as: Keyboard
[ 30510.527] (II) event3  - Logitech USB Keyboard: device is a keyboard
[ 30510.547] (II) systemd-logind: got resume for 13:82
[ 30510.548] (II) event18 - UVC Camera (046d:0807): is tagged by udev as: Keyboard
[ 30510.548] (II) event18 - UVC Camera (046d:0807): device is a keyboard
[ 30510.548] (II) systemd-logind: got resume for 13:68
[ 30510.549] (II) event4  - Logitech USB Keyboard Consumer Control: is tagged by udev as: Keyboard
[ 30510.549] (II) event4  - Logitech USB Keyboard Consumer Control: device is a keyboard
[ 30510.549] (II) systemd-logind: got resume for 13:69
[ 30510.550] (II) event5  - Logitech USB Keyboard System Control: is tagged by udev as: Keyboard
[ 30510.550] (II) event5  - Logitech USB Keyboard System Control: device is a keyboard
[ 30510.550] (II) systemd-logind: got resume for 13:64
[ 30510.551] (II) event0  - Sleep Button: is tagged by udev as: Keyboard
[ 30510.551] (II) event0  - Sleep Button: device is a keyboard
[ 30510.551] (II) systemd-logind: got resume for 13:65
[ 30510.552] (II) event1  - Power Button: is tagged by udev as: Keyboard
[ 30510.552] (II) event1  - Power Button: device is a keyboard
[ 30510.552] (II) systemd-logind: got resume for 13:70
[ 30510.553] (II) event6  - Logitech USB-PS/2 Optical Mouse: is tagged by udev as: Mouse
[ 30510.553] (II) event6  - Logitech USB-PS/2 Optical Mouse: device is a pointer
[ 30510.553] (II) systemd-logind: got resume for 13:66
[ 30510.553] (II) event2  - Power Button: is tagged by udev as: Keyboard
[ 30510.553] (II) event2  - Power Button: device is a keyboard

Thanks for your help!

Offline

#7 2019-05-30 22:18:56

tobek
Member
Registered: 2018-05-29
Posts: 4

Re: nvidia-settings not opening!

That warning indicates that you need to specify which X display nvidia-settings should use. For me it's :8 and so the command that works is nvidia-settings -c :8.

You can list all of your X displays with the following command:

(cd /tmp/.X11-unix && for x in X*; do echo ":${x#X}"; done)

Mine shows :0 (my normal display) and :8 (GPU-powered).

However, the output of your nvidia-smi command shows 3 processes (2 Xorg which is maybe weird, mine only shows 1 when in use, and openscad) that are currently using the GPU, so by all accounts your GPU appears to be working and in use.

Offline

#8 2019-05-30 23:34:24

columbarius
Member
Registered: 2018-07-08
Posts: 7

Re: nvidia-settings not opening!

Thanks for your answer. I'm starting my Xserver with startx and .xinitrc so i can have mutliple users with an X session at the same time, that's why there are 2 Xorg entries. Your command got me:

$ (cd /tmp/.X11-unix && for x in X*; do echo ":${x#X}"; done)
:0
:1

Probably one for each session?? I startet an X session on tty3 for a third user and got an :2 entry.
Even with this addition nvidia-settings isn't starting with different error messages:
Logged in at tty1

$ nvidia-settings -V -c :0
WARNING: NV-CONTROL extension not found on this Display.
ERROR: Unable to load info from any available system
$ nvidia-settings -V -c :1
No protocol specified
ERROR: Unable to find display on any available system

And with the user on tty2

$ nvidia-settings -V -c :1
WARNING: NV-CONTROL extension not found on this Display.
ERROR: Unable to load info from any available system
$ nvidia-settings -V -c :0
Invalid MIT-MAGIC-COOKIE-1 key
ERROR: Unable to find display on any available system

I've tested the same things with the third user on tty3 and got:

$ nvidia-settings -V -c :0
No protocol specified
ERROR: Unable to find display on any available system
$ nvidia-settings -V -c :1
Invalid MIT-MAGIC-COOKIE-1 key
ERROR: Unable to find display on any available system
$ nvidia-settings -V -c :2
WARNING: NV-CONTROL extension not found on this Display.
ERROR: Unable to load info from any available system

How do i identify the GPU-powered display and what is this MIT-MAGIC-COOKIE?

Thanks for your help!

Offline

#9 2019-05-31 00:17:31

tobek
Member
Registered: 2018-05-29
Posts: 4

Re: nvidia-settings not opening!

It looks like you have a different issue than I had, not sure about OP, but unfortunately I'm at the limit of my limited knowledge about this! Those new error messages look like some good search terms to dig around for.

Offline

#10 2019-06-02 23:56:03

columbarius
Member
Registered: 2018-07-08
Posts: 7

Re: nvidia-settings not opening!

I finally found the source of the error. Apparently the Xorg server has a threshold of errors and events that can occure on startup. When it is reached it will stop starting the extension. I was also using the vnc extension of X11 and in addition with NV-CONTROL this threshold was reached. After disabling the vnc server I was able to start nvidia-settings without problems. To have both enabled, it is recommended to patch the Xorg server to disable some build in extensions (https://devtalk.nvidia.com/default/topi … -drivers-/). I just disabled the vnc extension and I will not try this patch, so I can't verify if it works, but I wanted to add it for completion.

Offline

Board footer

Powered by FluxBB